Petr Štetiar [Tue, 25 Feb 2020 15:20:52 +0000 (16:20 +0100)]
kernel: video-core: add unpackaged v4l2-dv-timings module
Package kmod-bcm2835-unicam is missing dependencies for the following
libraries: v4l2-dv-timings.ko
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 25 Feb 2020 14:47:37 +0000 (15:47 +0100)]
bcm27xx: video: add BCM2835 Unicam video capture driver
Adds kernel module for Broadcom BCM2835 Unicam video capture driver.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 25 Feb 2020 14:40:25 +0000 (15:40 +0100)]
kernel: video: enable DMA contig memory allocator for videobuf2
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Sun, 23 Feb 2020 22:46:26 +0000 (23:46 +0100)]
kernel: video: add OmniVision OV5647 sensor support
This adds support for Video4Linux2 sensor driver for the OmniVision
OV5647 camera module.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Sun, 23 Feb 2020 22:40:12 +0000 (23:40 +0100)]
kernel: generic: add missing video config symbols
This symbols are needed after the addition of video-ov5647 module.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Sun, 23 Feb 2020 21:42:10 +0000 (22:42 +0100)]
kernel: video-core: add missing bits for camera modules
Adds missing bits which are mostly used by camera interfaces in embedded
platforms.
V4L2_FWNODE is needed for proper binding parsing and
VIDEO_V4L2_SUBDEV_API is needed for configuration of video format, size
and frame rate between HW blocks. MEDIA_CONTROLLER is API used to query
media devices internal topology and configure it dynamically.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Kevin Darbyshire-Bryant [Tue, 25 Feb 2020 16:38:35 +0000 (16:38 +0000)]
kernel: x86_64: drop CALGARY properly
Use correct config syntax of 'is not set' instead of just commenting the
line
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
John Crispin [Tue, 25 Feb 2020 16:15:07 +0000 (17:15 +0100)]
mediatek: add latest fixes provided by MTK
Signed-off-by: John Crispin <john@phrozen.org>
Kevin Darbyshire-Bryant [Mon, 24 Feb 2020 13:53:57 +0000 (13:53 +0000)]
kernel: x86_64: drop CALGARY IOMMU
The calgary IOMMU was only used on high-end IBM systems in the early
x86_64 age. This is an unlikely OpenWrt target and in fact upstream
are looking to drop the driver entirely with the bonus that we no
longer see:
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
John Crispin [Tue, 25 Feb 2020 16:03:44 +0000 (17:03 +0100)]
mac80211: enhance wifi reload
If the reconf call fails force a full restart of the radio.
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 25 Feb 2020 16:01:55 +0000 (17:01 +0100)]
hostapd: enhance wifi reload
Add a radio_config_id property. If the radio config changes return an error
upon receiving the reconf call.
Signed-off-by: John Crispin <john@phrozen.org>
Felix Fietkau [Tue, 25 Feb 2020 12:33:46 +0000 (13:33 +0100)]
mt76: update to the latest version
0a53dcda5203 mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power
46e63c05f7d1 mt76: mt7603: enable dynamic sensitivity adjustment by default
81476f11b68c mt76: mt7615: fix antenna mask initialization in DBDC mode
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Piotr Dymacz [Fri, 31 Jan 2020 14:22:54 +0000 (15:22 +0100)]
base-files: diag: restore default trigger for 'boot' LED
For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.
One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':
aliases {
led-boot = &led_wlan;
led-failsafe = &led_wlan;
led-upgrade = &led_wlan;
};
[...]
led_wlan: wlan {
label = "tl-wr841n-v14:green:wlan";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Mon, 20 Jan 2020 18:35:01 +0000 (19:35 +0100)]
hostapd: start hostapd/wpa_supplicant for all wiphy devices
c888e17e06 ("hostapd: manage instances via procd instead of pidfile")
added procd support for managing hostapd and wpa_supplicant daemons
but at the same time limited wiphy names to 'phy*'.
This brings back initial behaviour (introduced in
60fb4c92b6 ("hostapd:
add ubus reload") and makes procd manage daemons for any wiphy device
found in '/sys/class/ieee80211'.
CC: Felix Fietkau <nbd@nbd.name>
CC: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Mon, 25 Nov 2019 20:00:30 +0000 (21:00 +0100)]
umbim: move package to 'WWAN' submenu
'uqmi' was moved to 'WWAN' submenu in
9abdeee0b7.
Let's be consistent and do the same with 'umbim'.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Josef Schlehofer [Sat, 22 Feb 2020 22:03:37 +0000 (23:03 +0100)]
mbedtls: use correct SPDX License Identifier and add License file
License "GPL-2.0+" is deprecated License Identifier according to
SPDX License list [1]. The correct one is GPL-2.0-or-later.
While at it, also add the License file.
[1] https://spdx.org/licenses/
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Josef Schlehofer [Sat, 22 Feb 2020 22:03:36 +0000 (23:03 +0100)]
mbedtls: update to version 2.16.5
Changelog:
https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.5-and-2.7.14-released
Security advisory:
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2020-02
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Josef Schlehofer [Sun, 23 Feb 2020 07:48:39 +0000 (08:48 +0100)]
strace: update to version 5.5
Changelog:
https://strace.io/files/5.5/
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Hauke Mehrtens [Sun, 23 Feb 2020 12:20:11 +0000 (13:20 +0100)]
kernel: Sort generic configuration
This was done by executing these commands:
$ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new
$ mv target/linux/generic/config-4.14-new target/linux/generic/config-4.14
$ ./scripts/kconfig.pl '+' target/linux/generic/config-4.14 /dev/null > target/linux/generic/config-4.14-new
$ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 22 Feb 2020 19:39:47 +0000 (20:39 +0100)]
linux-atm: Fix compile warning
The function trace_on_exit() is given to atexit() as a parameter, but
atexit() only takes a function pointer to a function with a void
parameter.
This problem was introduced when the on_exit() function was incompletely
replaced by atexit().
Fixes: ba6c8bd6142f ("linux-atm: add portability fixes")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 9 Nov 2019 16:06:06 +0000 (17:06 +0100)]
ath10k-ct: Use ath10k-ct version 5.4
This makes ath10k-ct use the version based on kernel 5.4 by default.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 22 Feb 2020 18:12:34 +0000 (19:12 +0100)]
ath10k-ct: Update to version 2020-02-18
This adds AP VLAN support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 9 Nov 2019 16:06:05 +0000 (17:06 +0100)]
mac80211: Allow IBSS mode and different beacon intervals
ath10k-ct supports the combination to select IBSS (ADHOC) mode and
different beacon intervals together. mac80211 does not like this
combination, but Ben says this is ok, so remove this check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 5 Feb 2020 21:49:27 +0000 (22:49 +0100)]
rtl8812au-ct: Update to version 2020-01-12
This fixes compile problems with kernel 5.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Roger Pueyo Centelles [Mon, 24 Feb 2020 17:21:49 +0000 (18:21 +0100)]
ath79: add missing reset-gpios for NanoStation Loco M (XW)
When porting support from ar71xx to ath79, the reset-gpios option was
missed. Due to a hardware bug, this would eventually leave the devices
with RX-deaf Ethernet PHY.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Koen Vandeputte [Mon, 24 Feb 2020 15:11:02 +0000 (16:11 +0100)]
kernel: bump 4.19 to 4.19.106
Refreshed all patches.
Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Sungbo Eo [Sun, 23 Feb 2020 15:14:22 +0000 (00:14 +0900)]
kirkwood: remove kmod-i2c-mv64xxx from DEVICE_PACKAGES
Commit
9a1f441ac81c ("kirkwood: enable SoC drivers in the kernel config")
enabled I2C_MV64XXX in the kernel config, and the subsequent commit
0d5ba94088ef
("orion: enable SoC drivers in the kernel config") removed kmod-i2c-mv64xxx
package entirely. As the feature is now kernel built-in and the package does not
exist anymore, we can safely remove kmod-i2c-mv64xxx from DEVICE_PACKAGES.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Koen Vandeputte [Fri, 21 Feb 2020 14:09:00 +0000 (15:09 +0100)]
kernel: bump 4.19 to 4.19.105
Refreshed all patches.
Fixes:
- CVE-2013-1798
- CVE-2019-3016
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Fri, 21 Feb 2020 14:04:52 +0000 (15:04 +0100)]
kernel: bump 4.14 to 4.14.171
Refreshed all patches.
Fixes:
- CVE-2013-1798
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Sungbo Eo [Sun, 23 Feb 2020 15:17:16 +0000 (00:17 +0900)]
kirkwood: tidy up hwmon_fancontrol
Add indent and sort board_name alphabetically.
Sourcing /lib/functions.sh is already handled by /etc/rc.common. Drop the line.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 23 Feb 2020 12:38:24 +0000 (21:38 +0900)]
urngd: avoid PKG_NAME in define lines
> Avoid reuse of PKG_NAME in call, define and eval lines for consistency and
> readability. Write the full name instead.
Ref: https://openwrt.org/docs/guide-developer/packages
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 23 Feb 2020 12:37:36 +0000 (21:37 +0900)]
urandom-seed: avoid PKG_NAME in define lines
> Avoid reuse of PKG_NAME in call, define and eval lines for consistency and
> readability. Write the full name instead.
Ref: https://openwrt.org/docs/guide-developer/packages
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 23 Feb 2020 15:14:22 +0000 (00:14 +0900)]
kirkwood: add kmod-hwmon-core to DEVICE_PACKAGES
kmod-hwmon-lm* will not get into images unless kmod-hwmon-core is added to
DEVICE_PACKAGES as well.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[only address kmod-hwmon-core in this commit]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sungbo Eo [Sun, 23 Feb 2020 15:16:16 +0000 (00:16 +0900)]
kirkwood: tidy up image Makefile
- use k in SIZE variables
- break long lines
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 23 Feb 2020 15:12:23 +0000 (00:12 +0900)]
kirkwood: fix device node name of Iomega ix2-200
The current device node name of ix2-200 is "iom_ix2_200", which results
in a SUPPORTED_DEVICES string "iom,ix2,200" that does not match the
compatible in DTS and the board name used in board.d.
Fix this by replacing the second underscore with a dash, following
vendor_model scheme.
Fixes: 27b2f0fc0fc5 ("kirkwood: add support for Iomega Storcenter ix2-200")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[commit title/message rephrase]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bauer [Sun, 23 Feb 2020 11:50:30 +0000 (12:50 +0100)]
ath79: fix TP-Link TL-WA901ND v2 PHY stuck in reset
Some newer bootloaders for the TP-Link TL-WA901ND put the ethernet PHY
in reset before loading the kernel, thus the LAN interface is not
working in OpenWrt.
Clear the reset to restore ethernet functionality.
Signed-off-by: David Bauer <mail@david-bauer.net>
Sungbo Eo [Sun, 23 Feb 2020 04:05:35 +0000 (13:05 +0900)]
x86: avoid underscore in package name
As
07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows,
underscores might cause build failures. Replace underscore with dash.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 23 Feb 2020 04:05:27 +0000 (13:05 +0900)]
ltq-vdsl-mei: avoid underscore in package name
As
07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows,
underscores might cause build failures. Replace underscore with dash.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Adrian Schmutzler [Sat, 22 Feb 2020 18:33:41 +0000 (19:33 +0100)]
ramips: move includes to DTSI for mt7628an_tplink_8m*
All devices inherited from mt7628an_tplink_8m.dtsi and
mt7628an_tplink_8m-split-uboot.dtsi contain the same additional
includes in the DTS files.
Move them to the DTSI files instead.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sat, 22 Feb 2020 18:28:17 +0000 (19:28 +0100)]
ramips: move compatible for Ubiquiti Edgerouter X to DTS file
So far, the compatible for the Ubiquiti Edgerouter X has been
defined in the DTSI file and inherited for the edgerouterx.dts,
but overwritten for the edgerouterx-sfp.dts. In contrast, the
model was stored in the DTS file in both cases.
To resolve this somewhat confusing situation, move the compatible
with the device name for edgerouterx to the DTS file as well.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sat, 22 Feb 2020 18:26:17 +0000 (19:26 +0100)]
ramips: remove redundant includes in DTS files
Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.
Remove those redundant includes in the DTS files. For vocore, the
include is moved to the parent DTSI file.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sat, 22 Feb 2020 18:16:05 +0000 (19:16 +0100)]
ath79: remove redundant includes in DTS files
Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.
Remove those redundant includes in the DTS files.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Scott Roberts [Wed, 22 Jan 2020 22:42:46 +0000 (15:42 -0700)]
packages/boot: bump arm-trusted-firmware-mvebu version
The current version of ATF does not support power off for SGMII
COMPHY. Update to latest ATF to resolve this issue.
Signed-off-by: Scott Roberts <ttocsr@gmail.com>
Fredrik Olofsson [Wed, 29 Jan 2020 14:39:53 +0000 (15:39 +0100)]
mac80211: backport fix TID field in monitor mode transmit
Backport
753ffad3d6243303994227854d951ff5c70fa9e0 as merged in Linux v5.5-rc3.
Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
Martin Schiller [Wed, 5 Feb 2020 07:12:54 +0000 (08:12 +0100)]
kernel: fix xt_connmark.h
Commit
a1cfe0dcbb24 (kernel: connmark set-dscpmark follow upstreamimg
attempt") broke the usage of xt_connmark.h in user-space (e.g.
strongswan), because the BIT() macro is unknown there.
Fixes: a1cfe0dcbb24 (kernel: connmark set-dscpmark follow upstreamimg attempt")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Daniel Engberg [Mon, 3 Feb 2020 15:30:06 +0000 (15:30 +0000)]
toolchain/binutils: Add binutils 2.34
Refresh patches
Drop 300-012_check_ldrunpath_length.patch
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Tue, 4 Feb 2020 01:10:17 +0000 (01:10 +0000)]
package/utils/f2fs-tools: Update to 1.13.0
Update f2fs-tools to 1.13.0
Remove upstreamed patches
Disable build of static library
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Aleksander Jan Bajkowski [Sun, 9 Feb 2020 15:23:06 +0000 (16:23 +0100)]
generic: refresh patches
just run: make target/linux/refresh V=s
Fixes: 6e315de0f422acf66c3505a4ed8c095a0f5d3424
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Davide Fioravanti [Wed, 19 Feb 2020 18:43:00 +0000 (19:43 +0100)]
usbmode: Update modeswitch data to
20191128
Add support for new hardware
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
Aleksander Jan Bajkowski [Tue, 18 Feb 2020 19:32:11 +0000 (20:32 +0100)]
kernel: remove non-existant symbols from 4.19 config
These symbols only exist in kernel version <= 4.15
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
Tomasz Maciej Nowak [Mon, 20 Jan 2020 14:42:00 +0000 (15:42 +0100)]
kernel: replace SUBDIRS with M in package recipes
The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
DENG Qingfang [Fri, 14 Feb 2020 13:41:06 +0000 (21:41 +0800)]
linux-firmware: update to
20200122
Update linux-firmware to
20200122
git log --pretty=oneline --abbrev-commit
20191215..
20200122
1eb2408 linux-firmware: Update firmware file for Intel Bluetooth AX200
0dc1611 linux-firmware: Update firmware file for Intel Bluetooth AX201
d03f79c linux-firmware: Update firmware file for Intel Bluetooth 9560
aab62bc linux-firmware: Update firmware file for Intel Bluetooth 9260
ed0aa3a nvidia: add TU102/TU104/TU106 signed firmware
9c340bd amdgpu: update navi10 firmware for 19.50
3b4a503 amdgpu: Add navi10 TA ucode
16cc13a Merge branch 'v1.1.3' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.
37f3177d mediatek: update MT8173 VPU firmware to v1.1.3
67d4ff5 Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714
f1c9e7b radeon: update oland rlc microcode from amdgpu
b1dafb7 amdgpu: update vega20 microcode for 19.50
c38789e amdgpu: update vega12 microcode for 19.50
5a141c1 amdgpu: update vega10 microcode for 19.50
a03173a amdgpu: update picasso microcode for 19.50
86e9a5f amdgpu: update raven2 microcode for 19.50
febe09a amdgpu: update raven microcode for 19.50
af76fd0 amdgpu: update navi10 microcode for 19.50
b5b176a amdgpu: update navi14 microcode for 19.50
ad90178 amdgpu: add TA microcode for Raven asics
379551b qed: Add firmware 8.42.2.0
58b4003 Merge branch 'RB3-wlan-firmware-1387-v2' of https://github.com/andersson/linux-firmware
5967a45 Adjust WHENCE entry to check_whence doesn't complain
d1e743d Merge branch 'master' of https://github.com/NXP/mwifiex-firmware
d6219ab qcom: Switch SDM845 WLAN firmware
e65245c linux-firmware: add NXP firmware licence file
6871bff Merge branch 'ath10k-
20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
b142c2e ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
8809b87 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070
513d70c ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047
203435b ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070
a66d2fc ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047
6d19154 ath10k: QCA6174 hw3.0: update board-2.bin
c4586ff linux-firmware: Update AMD cpu microcode
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
DENG Qingfang [Wed, 12 Feb 2020 12:16:05 +0000 (20:16 +0800)]
iw: update to 5.4
Update iw to 5.4
This increases the ipk size of iw-tiny/full by about 400 bytes
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Rosen Penev [Thu, 20 Feb 2020 03:42:35 +0000 (19:42 -0800)]
libbsd: update to 0.10.0
Removed all upstream patches.
Added PKG_BUILD_PARALLEL for faster compilation.
Small Makefile rearrangements for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Hauke Mehrtens [Wed, 12 Feb 2020 10:49:02 +0000 (11:49 +0100)]
build: Add additional kernel debug options
Make it possible to activate some additional kernel debug options.
This can be used to debug some problems in kernel drivers.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Hauke Mehrtens [Wed, 12 Feb 2020 10:49:01 +0000 (11:49 +0100)]
build: Add KCOV kernel code coverage for fuzzing
The adds an option to activate KCOV (Code coverage for fuzzing).
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Hauke Mehrtens [Wed, 12 Feb 2020 10:49:00 +0000 (11:49 +0100)]
build: Add option KERNEL_KASAN
The kernel kernel address sanitizer is able to detect some memory
bugs in the kernel like out of range array accesses.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Hauke Mehrtens [Wed, 12 Feb 2020 10:48:59 +0000 (11:48 +0100)]
build: Add option KERNEL_UBSAN
The kernel Undefined Behavior Sanitizer is able to detect some memory
bugs in the kernel like out of range array accesses.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Hauke Mehrtens [Tue, 11 Feb 2020 18:01:24 +0000 (19:01 +0100)]
x86: Add missing kernel option CONFIG_X86_DECODER_SELFTEST
This option has now a different dependency and can be activated, set a
default value.
Fixes: 20b5a4ca01ca ("kernel: bump 4.19 to 4.19.101")
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Tested-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Adrian Schmutzler [Thu, 20 Feb 2020 17:38:04 +0000 (18:38 +0100)]
rssileds: add dependencies based on LDFLAGS
This adds the direct dependencies introduced by TARGET_LDFLAGS
to the package's DEPENDS variable.
This was found by accidentally building rssileds on octeon, which
resulted in:
"Package rssileds is missing dependencies for the following libraries:
libnl-tiny.so"
Though the dependencies are provided when building for the
relevant targets ar71xx, ath79 and ramips, it seems more tidy to
specify them explicitly.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 21 Feb 2020 20:09:25 +0000 (21:09 +0100)]
kirkwood: do not expose status LED to user config by default
So far, the state of status LEDs is set up in 01_leds for many devices
in kirkwood target. As those LEDs are also controlled by diag.sh,
exposing them to the user via uci config by default seems not helpful
and might even have confusing results for the user.
Thus, remove the ucidef_set_led_default setup for power/status LED, but
do not touch the rest where user control is actually a feature.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 19 Feb 2020 16:03:04 +0000 (17:03 +0100)]
kirkwood: set default state for status LEDs in device tree
This adds the default-state = "on"; statement for the power or
primary status LED in DTS on kirkwood. This will ensure that this
LED will be lit up very early in the boot process (i.e. before
diag.sh is executed) and thus will provide an additional hint to the
user when problems arise during early boot process.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 19 Feb 2020 15:39:32 +0000 (16:39 +0100)]
kirkwood: add diag LEDs for ZyXEL NSA325
This device has had no diag LEDs set up so far, so let's just
add them.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Pawel Dembicki [Tue, 4 Feb 2020 16:26:47 +0000 (17:26 +0100)]
kirkwood: use generic diag.sh
This commit removes the target-specific diag.sh script. This way, the
generic one is used for the target, which uses DT-aliases to specify the
LEDs used.
Generic diag.sh allow to use different LEDs to indicate different states.
Non-red status LEDs for indicating boot and a running system.
Where possible, the red or orange LEDs are used to indicate failsafe
mode and a running upgrade.
Compile-tested: all target devices.
Run-tested: CheckPoint L-50
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[remove unrelated cosmetic changes, rename some labels, add pogo_e02]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Stijn Tintel [Thu, 20 Feb 2020 21:39:06 +0000 (23:39 +0200)]
lldpd: bump to 1.0.5
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Daniel Golle [Sun, 2 Feb 2020 16:09:50 +0000 (18:09 +0200)]
ath79: add support for Teltonika RUT955
Specification:
- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in 4G/3G module (example: Quectel EC-25EU)
- internal microSD slot (spi-mmc, buggy and disabled for now)
- RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0)
- RS422/RS485 (AR934x high speed UART, /dev/ttyATH1)
- analog 0-24V input (MCP3221)
- various digital inputs and outputs incl. a relay
- 11x LED (4 are driven by AR9344, 7 by 74HC595)
- 2x miniSIM slot (can be swapped via GPIO)
- 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- debugging UART available on PCB edge connector
Serial console (/dev/ttyS0) pinout:
- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side
Flash instruction:
Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.2".
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 5 Feb 2020 15:00:57 +0000 (17:00 +0200)]
serial: ar933x_uart: add rs485 support
Add support for RS485 tranceiver with transmit/receive switch hooked
to a RTS GPIO pin.
Use the 'rts-gpios' and 'rs485-rts-active-low' properties as described
in devicetree/bindings/serial/rs485.yaml.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Fri, 14 Feb 2020 14:38:55 +0000 (15:38 +0100)]
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
This adds support for the various clones of the TL-WA830RE recently
supported in
fb99ac6807f2 ("ath79: add support for TP-Link TL-WA830RE v1"):
- tplink,tl-wa701nd-v1
- tplink,tl-wa730re-v1
- tplink,tl-wa801nd-v1
- tplink,tl-wa830re-v1 (already supported)
- tplink,tl-wa901nd-v1
Since these devices are 100%-clones in ar71xx, this patch adds all
of them without run-testing (as this has been done for TL-WA830RE v1).
Specifications:
- SOC: Atheros AR7240
- CPU: 400MHz
- Flash: 4 MiB (Spansion S25FL032P)
- RAM: 32 MiB (Zentel A3S56D40FTP-G5)
- WLAN: Atheros AR9280 bgn 2x2
- Ethernet: 1 port (100M)
Flash instructions:
- install from u-boot with tftp (requires serial access)
> setenv ipaddr a.b.c.d
> setenv serverip e.f.g.h
> tftpboot 0x80000000 \
openwrt-ath79-tiny-tplink_tl-waxxxxx-v1-squashfs-factory.bin
> erase 0x9f020000 +0x3c0000
> cp.b 0x80000000 0x9f020000 0x3c0000
> bootm 0x9f020000
- flash factory image from OEM WebUI
- sysupgrade from ar71xx image
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
DENG Qingfang [Wed, 12 Feb 2020 13:14:26 +0000 (21:14 +0800)]
ramips: fix HiWiFi HC5761A USB port
Export GPIO 41 to power USB port
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Petr Štetiar [Tue, 11 Feb 2020 10:17:41 +0000 (11:17 +0100)]
ramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by default
Looking at the current upstream driver implementation, it seems like the
TX/RX flow control is enabled only if the flow control pause option is
resolved from the device/link partner advertisements (or otherwise set).
On the other hand, our current in-tree driver force enables TX/RX
flow control by default, thus possibly leading to TX timeouts if the
other end sends pause frames (which are not properly handled?):
WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x1ac/0x324
NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out
Disabling the flow control on PORT 5 MAC seems to fix this issues as the
pause frames are then filtered out. While at it, I'm removing the if
condition completely as suggested, since this code is run only on mt7621
SoC, so there is no need to check for the silicon revisions.
Ref: https://lists.openwrt.org/pipermail/openwrt-devel/2017-November/009882.html
Ref: https://forum.openwrt.org/t/mtk-soc-eth-watchdog-timeout-after-r11573/50000/12
Suggested-by: Felix Fietkau <nbd@nbd.name>
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Felix Fietkau [Thu, 20 Feb 2020 14:06:14 +0000 (15:06 +0100)]
mt76: update to the latest version
f4415afce213 mt76: mt76u: loop over all possible rx queues in mt76u_rx_tasklet
5b9f949cb760 mt76: mt76u: fix a possible memory leak in mt76u_init
fd892bc033fb mt76: mt76u: rely only on data buffer for usb control messagges
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Thu, 20 Feb 2020 09:29:09 +0000 (10:29 +0100)]
ath79: correct Siemens WS-AP3610 blocksize
With the wrong blocksize, the rootfs was not positioned on the boundary
of a block, thus breaking the mtdsplit driver.
Signed-off-by: David Bauer <mail@david-bauer.net>
Petr Štetiar [Thu, 20 Feb 2020 08:03:54 +0000 (09:03 +0100)]
ppp: backport security fixes
8d45443bb5c9 pppd: Ignore received EAP messages when not doing EAP
8d7970b8f3db pppd: Fix bounds check in EAP code
858976b1fc31 radius: Prevent buffer overflow in rc_mksid()
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Daniel Engberg [Mon, 3 Feb 2020 17:11:35 +0000 (17:11 +0000)]
util-linux: Update to 2.35.1
Update util-linux to 2.35.1 and refresh patches.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[commit subject and description tweaks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Adrian Schmutzler [Wed, 19 Feb 2020 22:34:41 +0000 (23:34 +0100)]
ath79: add label MAC address for Ubiquiti Picostation M (XM)
This adds the label MAC address for the Ubiquiti Picostation M (XM).
This was overlooked when adding support in the previous patch.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 17 Feb 2020 23:08:18 +0000 (00:08 +0100)]
ath79: add support for Ubiquiti Picostation M (XM)
This adds support for the Ubiquiti Picostation M (XM), which has the
same board/LEDs as the Bullet M XM, but different case and antennas.
Specifications:
- AR7241 SoC @ 400 MHz
- 32 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- External antenna: 5 dBi (USA), 2 dBi (EU)
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via WebUI:
Upload the factory image via the stock firmware web UI.
Attention: airOS firmware versions >= 5.6 have a new bootloader with
an incompatible partition table!
Please downgrade to <= 5.5 _before_ flashing OpenWrt!
Refer to the device's Wiki page for further information.
Flashing via TFTP:
Same procedure as other NanoStation M boards.
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_picostation-m-squashfs-factory.bin
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sven Roederer [Mon, 17 Feb 2020 11:22:53 +0000 (12:22 +0100)]
ath79: add support for Ubiquiti Nanostation Loco M (XM)
This adds support for the Ubiquiti Nanostation Loco M (XM), which
has the same board/LEDs as the Bullet M XM, but different case and
antennas.
Specifications:
- AR7241 SoC @ 400 MHz
- 32 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- NS Loco M2: built-in antenna: 8 dBi; AR9287
- NS Loco M5: built-in antenna: 13 dBi; 2T2R 5 GHz radio
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via WebUI:
Upload the factory image via the stock firmware web UI.
Note that only certain firmware versions accept unsigned
images. Refer to the device's Wiki page for further information.
Flashing via TFTP:
Same procedure as other NanoStation M boards.
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-squashfs-factory.bin
Tested on NanoStation Loco M2.
Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 16 Feb 2020 09:40:53 +0000 (10:40 +0100)]
ath79: move TPLINK_HWID/_HWREV to parent for tplink-safeloader
Several devices with tplink-safeloader contain default values (0x0)
for TPLINK_HWID and TPLINK_HWREV in their device definitions.
Move those to common tplink-safeloader definition so they do not
have to be repeated each time.
While at it, set default value for tplink-v1 and tplink-v2 as well.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Felix Fietkau [Wed, 19 Feb 2020 21:12:04 +0000 (22:12 +0100)]
mt76: update to the latest version
bd0df1b017a8 mt76: avoid extra RCU synchronization on station removal
d5a5e97b67c7 mt76: mt76x2: avoid starting the MAC too early
a67e42990d8a mt76: mt7615: fix msdu_id endianness in mt7615_write_hw_txp
d3af8bd3c722 mt76: mt7615: set proper length in strncmp
9c43417db17c mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
764e1d208a06 mt76: mt7615: fix tx power reporting
1881241c7ee5 mt76: fix rounding issues on converting per-chain and combined txpower
fa14e7f33199 mt76: mt7615: rework rx phy index handling
a205ce3e3e2d mt76: mt7615: fix ext_phy flag for stations
457a93203690 mt76: mt7615: fix MT_TX_HW_QUEUE_EXT_PHY to deal with mac80211 changes
c75cf513c674 mt76: do not set HOST_BROADCAST_PS_BUFFERING for mt7615
cc56c400167c mt76: fix LED link time failure
4dbd56b86970 mt76: mt76x0u: add support to TP-Link T2UHP
e226309c4bc4 mt76: mt7615: rely on mt76_queues_read for mt7622
c6a025318075 mt76: mt76u: extend RX scatter gather number
dfc24bc504e3 mt76: mt76u: rename stat_wq in wq
2bbffd2cb37b mt76: mt7615: remove rx_mask in mt7615_eeprom_parse_hw_cap
f408a2b7566c mt76: Introduce mt76_mcu data structure
17ecf0762542 mt76: mt76x02: fix handling MCU timeouts during hw restart
284e9fd72912 mt76: mt7615: fix monitor injection of beacon frames
8f8e9161b355 mt76: fix array overflow on receiving too many fragments for a packet
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Eneas U de Queiroz [Tue, 18 Feb 2020 20:47:20 +0000 (17:47 -0300)]
kernel: avoid underscore in *6lowpan package names
Packages kmod-bluetooth_6lowpan and kmod-ieee802154_6lowpan contain an
underscore in the package name. This causes problems in package/install
because when building a list of package files to install offline using
opkg, it uses a wildcard of the form $(dir)/$(pkg)_*.ipk.
If you were to select kmod-bluetooth=y, but kmod-bluetooth_6lowpan=m,
the latter would be picked up by that wildcard, and make package/install
would fail:
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
* for kmod-bluetooth_6lowpan:
* kmod-6lowpan
* opkg_install_cmd: Cannot install package kmod-bluetooth_6lowpan.
Changing the wildcard pattern is not trivial, and there may be other
places in the build system making this assumption about the package name
format.
Using a dash in place of the underscore avoids the issue.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Russell Senior [Tue, 18 Feb 2020 06:16:10 +0000 (22:16 -0800)]
dnsmasq: fix uci-defaults script to exit 0 so it is cleaned up
A file, package/network/services/dnsmasq/files/50-dnsmasq-migrate-resolv-conf-auto.sh,
was added in commit
6a2855212096d2c486961a0841b037bae4b75de7, but it
does not exit in a way that tells the uci-defaults mechanism that it
succeeded, and so it is not cleaned up after running successfully. Add
an exit 0 to the end to correct that.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Daniel Engberg [Mon, 3 Feb 2020 13:30:01 +0000 (13:30 +0000)]
tools/bison: Update to 3.5.1
Update bison to 3.5.1
Use POSIX threads as the previous option is no longer valid
Disable NLS support to be consistent with other tools such as e2fsprogs and sed
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 3 Feb 2020 13:21:56 +0000 (13:21 +0000)]
tools/e2fsprogs: Update to 1.45.5
Update e2fsprogs to 1.45.5
Enable pthreads support
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 3 Feb 2020 13:04:07 +0000 (13:04 +0000)]
tools/gmp: Remove obsolete options
Remove mpbsd argument
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 3 Feb 2020 13:09:49 +0000 (13:09 +0000)]
tools/sed: Update to 4.8
Update sed to 4.8
Use POSIX threads
Disable i18n and selinux support
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 3 Feb 2020 13:13:27 +0000 (13:13 +0000)]
tools/patchelf: Update to 0.10
Update patchelf to 0.10
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Mon, 3 Feb 2020 15:47:47 +0000 (15:47 +0000)]
tools/libressl: Update to 3.0.2
Update libressl to 3.0.2 and remove 010-avoid-glibc.patch as fix is added by upstream
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Adrian Schmutzler [Thu, 30 Jan 2020 13:59:25 +0000 (14:59 +0100)]
ath79: add gpio4 pinmux on TL-WR841N/ND v8, WR842N v2, MR3420 v2
This adds a pinmux to the shared DTSI for TP-Link TL-WR841N/ND v8,
TL-WR842N v2 and TL-MR3420 v2. It is supposed to be the equivalent
of:
/* config gpio4 as normal gpio function */
ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,AR934X_GPIO_OUT_GPIO);
This allows to enable USB power on these devices.
While at it, move the jtag_disable_pins to &gpio node and remove the
redundant status=okay there.
Tested on TP-Link TL-WR842N v2.
Fixes: FS#2753
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Armin Fuerst <armin@fuerst.priv.at>
Adrian Schmutzler [Mon, 17 Feb 2020 19:16:17 +0000 (20:16 +0100)]
ath79: move mikrotik-caldata.sh to target base-files
Mikrotik devices will be found in both generic and nand subtargets.
The file mikrotik-caldata.sh, currently used in generic, contains
a few lines of code that would need to be duplicated for nand
support. Instead of duplicating it, move it to target base-files,
as size impact is small and the maintenance gain should outweigh it.
This is changed separately to make life easier for the people
currently working on Mikrotik NAND support.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bauer [Sat, 8 Feb 2020 11:58:25 +0000 (12:58 +0100)]
ath79: add support for Siemens WS-AP3610
Hardware
--------
SoC: Atheros AR7161
RAM: Samsung K4H511638D-UCCC
2x 64M DDR1
SPI: Micron M25P128 (16M)
WiFi: Atheros AR9160 bgn
Atheros AR9160 an
ETH: Broadcom BCM5481
LED: Power (Green/Red)
ETH (Green / Blue / Yellow)
(PHY-controlled)
WiFi 5 (Green / Blue)
WiFi 2 (Green / Blue)
BTN: Reset
Serial: Cisco-Style RJ45 - 115200 8N1
Installation
------------
1. Download the OpenWrt initramfs-image. Place it into a TFTP server
root directory and rename it to
1401A8C0.img. Configure the TFTP
server to listen at 192.168.1.66/24.
2. Connect the TFTP server to the access point.
3. Connect to the serial console of the access point. Attach power and
interrupt the boot procedure when prompted (bootdelay is 1 second).
4. Configure the U-Boot environment for booting OpenWrt from Ram and
flash:
$ setenv boot_openwrt 'setenv bootargs; bootm 0xbf080000'
$ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
tftpboot; bootm'
$ saveenv
5. Load OpenWrt into memory:
$ run ramboot_openwrt
Wait for the image to boot.
6. Transfer the OpenWrt sysupgrade image to the device. Write the image
to flash using sysupgrade:
$ sysupgrade -n /path/to/openwrt-sysuograde.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 8 Feb 2020 22:36:12 +0000 (23:36 +0100)]
ath79: backport phy reset-controller patches
The Siemens WS-AP3610 asserts reset to the ethernet PHY with the
reset-register. Backport the necessary patches to de-assert reset
when probing the PHY.
These patches can be dropped when using kernel 5.4.
Signed-off-by: David Bauer <mail@david-bauer.net>
Jason A. Donenfeld [Fri, 14 Feb 2020 23:05:17 +0000 (00:05 +0100)]
wireguard: bump to 0.0.
20200215
* send: cleanup skb padding calculation
* socket: remove useless synchronize_net
Sorry for the back-to-back releases. This fixes a regression spotted by Eric
Dumazet.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Adrian Schmutzler [Sat, 8 Feb 2020 20:58:55 +0000 (21:58 +0100)]
brcm2708: rename target to bcm27xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.
Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).
This also renames the packages brcm2708-userland and brcm2708-gpu-fw.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
Adrian Schmutzler [Sat, 8 Feb 2020 19:33:30 +0000 (20:33 +0100)]
brcm63xx: rename target to bcm63xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 7 Feb 2020 14:42:54 +0000 (15:42 +0100)]
brcm47xx: rename target to bcm47xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
DENG Qingfang [Wed, 12 Feb 2020 13:17:23 +0000 (21:17 +0800)]
ramips: fix HiWiFi HC5761A switch settings
HC5761A has only 2 LAN ports
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
DENG Qingfang [Wed, 12 Feb 2020 12:23:01 +0000 (20:23 +0800)]
iproute2: update to 5.5.0, enable LTO
Update iproute2 to 5.5.0
Enable LTO to save several KB of size
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Paul Spooren [Wed, 12 Feb 2020 03:27:24 +0000 (17:27 -1000)]
build: fix empty SUBTARGET in json files
Some targets like kirkwood or omap don't use a subtarget which results
in a malformed JSON info file.
Instead of having a valid value like `"target": "ath79/tiny"` for these
targets the value is `"target": "kirkwood/"`.
This patch uses the same if condition to use `generic` if the subtarget
is empty.
Tested for the kirkwood target.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Tomislav Požega [Thu, 6 Sep 2018 14:20:13 +0000 (16:20 +0200)]
mac80211: expose chanbw support to debugfs for ath9k_htc
This will ensure the htc suffixed driver also gets created
chanbw debugfs entry.
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Michael Yartys [Wed, 29 Jan 2020 22:22:02 +0000 (23:22 +0100)]
ath10k-firmware: update ath10k-ct firmware
This supports better per-chain noise floor reporting, which in turn allows for
better RSSI reporting in the driver.
Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices).
Wave-2 has fix for crash likely related to rekeying.
Wave-1 has some debugging code added where a user reported a crash.
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq806x+qca9984,ipq4019+qca9986]
Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
projects / openwrt / staging / ynezz.git / log