Zoltan HERPAI [Sat, 12 Aug 2023 11:51:38 +0000 (13:51 +0200)]
sunxi: bananapro: add firmware files for Ampak 6181
The Bananapro board has an Ampak 6181 onboard (BCM43362/1), enable
the firmware files in the device profile, and add wpad-basic-mbedtls.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
John Audia [Fri, 11 Aug 2023 16:39:29 +0000 (12:39 -0400)]
kernel: bump 6.1 to 6.1.45
Changelog: https://lore.kernel.org/stable/
2023081123-ion-ferment-1ce5@gregkh/
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #x86_64 (j1900)
Signed-off-by: John Audia <therealgraysky@proton.me>
Felix Fietkau [Fri, 11 Aug 2023 22:36:13 +0000 (00:36 +0200)]
hostapd: do not store data in object prototype
It cannot be properly cloned, since it is attached to the resource type.
Use a separate registry for data. Fixes object confusion issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 11 Aug 2023 21:08:56 +0000 (23:08 +0200)]
hostapd: restart wifi when the bssid of the first interface changes
Full restart is necessary, since the bss wdev is not re-created
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 11 Aug 2023 13:45:14 +0000 (15:45 +0200)]
hostapd: shut down client mode on the same phy while restarting AP
An active client mode interface could prevent the AP from claiming its channel
and mess up the bringup sequence order
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Zoltan HERPAI [Thu, 5 Mar 2020 20:54:53 +0000 (21:54 +0100)]
sunxi: add support for Banana Pi M3
CPU Allwinner A83t Octa-core Cortex A7 @ 1.2GHz
Memory 2Gb DDR3
Storage SDcard, SATA (via USB), 8GB eMMC
Network 10/100/1000M ethernet, Ampak AP6212 wifi + BT
USB 2x USB 2.0
Flashing instructions:
Standard sunxi SD card installation procedure - copy image to SD card,
insert into SD card slot on the device and boot.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sun, 17 Jan 2021 22:26:33 +0000 (23:26 +0100)]
sunxi: add modules for AC100 MFD and RTC
The X-Powers AC100 is a multi-function IC used to provide RTC
and audio codec via RSB (reduced serial bus, an Allwinner-
speciality). On some boards using the A80/A83T SoCs, aside
from the RTC functionality, the RTC is used as a clocksource
for the Ampak WiFi/BT modules.
Add modules for the core MFD support and the RTC.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Felix Fietkau [Fri, 11 Aug 2023 13:41:45 +0000 (15:41 +0200)]
hostapd: fix center frequency calculation for channel 149 and above
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Fri, 11 Aug 2023 09:38:29 +0000 (11:38 +0200)]
firmware: intel-microcode: update to
20230808
Debian changelog:
intel-microcode (3.
20230808.1) unstable; urgency=high
* New upstream microcode datafile
20230808 (closes: #
1043305)
Mitigations for "Downfall" INTEL-SA-00828 (CVE-2022-40982),
INTEL-SA-00836 (CVE-2023-23908) and INTEL-SA-00837 (CVE-2022-41804)
* Updated microcodes:
sig 0x00050653, pf_mask 0x97, 2023-03-23, rev 0x1000181, size 36864
sig 0x00050654, pf_mask 0xb7, 2023-03-06, rev 0x2007006, size 44032
sig 0x00050656, pf_mask 0xbf, 2023-03-17, rev 0x4003604, size 38912
sig 0x00050657, pf_mask 0xbf, 2023-03-17, rev 0x5003604, size 38912
sig 0x0005065b, pf_mask 0xbf, 2023-03-21, rev 0x7002703, size 30720
sig 0x000606a6, pf_mask 0x87, 2023-03-30, rev 0xd0003a5, size 297984
sig 0x000706e5, pf_mask 0x80, 2023-02-26, rev 0x00bc, size 113664
sig 0x000806c1, pf_mask 0x80, 2023-02-27, rev 0x00ac, size 111616
sig 0x000806c2, pf_mask 0xc2, 2023-02-27, rev 0x002c, size 98304
sig 0x000806d1, pf_mask 0xc2, 2023-02-27, rev 0x0046, size 103424
sig 0x000806e9, pf_mask 0xc0, 2023-02-22, rev 0x00f4, size 106496
sig 0x000806e9, pf_mask 0x10, 2023-02-23, rev 0x00f4, size 105472
sig 0x000806ea, pf_mask 0xc0, 2023-02-23, rev 0x00f4, size 105472
sig 0x000806eb, pf_mask 0xd0, 2023-02-23, rev 0x00f4, size 106496
sig 0x000806ec, pf_mask 0x94, 2023-02-26, rev 0x00f8, size 106496
sig 0x000806f8, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1, size 572416
sig 0x000806f7, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f6, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f5, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f4, pf_mask 0x87, 2023-05-09, rev 0x2b0004b1
sig 0x000806f8, pf_mask 0x10, 2023-05-15, rev 0x2c000271, size 605184
sig 0x000806f6, pf_mask 0x10, 2023-05-15, rev 0x2c000271
sig 0x000806f5, pf_mask 0x10, 2023-05-15, rev 0x2c000271
sig 0x000806f4, pf_mask 0x10, 2023-05-15, rev 0x2c000271
sig 0x00090672, pf_mask 0x07, 2023-04-18, rev 0x002e, size 220160
sig 0x00090675, pf_mask 0x07, 2023-04-18, rev 0x002e
sig 0x000b06f2, pf_mask 0x07, 2023-04-18, rev 0x002e
sig 0x000b06f5, pf_mask 0x07, 2023-04-18, rev 0x002e
sig 0x000906a3, pf_mask 0x80, 2023-04-18, rev 0x042c, size 219136
sig 0x000906a4, pf_mask 0x80, 2023-04-18, rev 0x042c
sig 0x000906e9, pf_mask 0x2a, 2023-02-23, rev 0x00f4, size 108544
sig 0x000906ea, pf_mask 0x22, 2023-02-23, rev 0x00f4, size 104448
sig 0x000906eb, pf_mask 0x02, 2023-02-23, rev 0x00f4, size 106496
sig 0x000906ec, pf_mask 0x22, 2023-02-23, rev 0x00f4, size 105472
sig 0x000906ed, pf_mask 0x22, 2023-02-27, rev 0x00fa, size 106496
sig 0x000a0652, pf_mask 0x20, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0653, pf_mask 0x22, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0655, pf_mask 0x22, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0660, pf_mask 0x80, 2023-02-23, rev 0x00f8, size 97280
sig 0x000a0661, pf_mask 0x80, 2023-02-23, rev 0x00f8, size 96256
sig 0x000a0671, pf_mask 0x02, 2023-02-26, rev 0x0059, size 104448
sig 0x000b0671, pf_mask 0x32, 2023-06-06, rev 0x0119, size 210944
sig 0x000b06a2, pf_mask 0xe0, 2023-06-06, rev 0x4119, size 216064
sig 0x000b06a3, pf_mask 0xe0, 2023-06-06, rev 0x4119
sig 0x000b06e0, pf_mask 0x11, 2023-04-12, rev 0x0011, size 136192
* source: update symlinks to reflect id of the latest release,
20230808
intel-microcode (3.
20230512.1) unstable; urgency=medium
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 10 Aug 2023 15:50:38 +0000 (17:50 +0200)]
linux-firmware: update to
20230804
7be2766 (tag:
20230804) Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware
66c1db8 Merge https://github.com/pkshih/linux-firmware
5046942 Mellanox: Add new mlxsw_spectrum firmware xx.2012.1012
5c7b67f linux-firmware: Add URL for latest FW binaries for NXP BT chipsets
29f185d rtw89: 8851b: update firmware to v0.29.41.1
742bf57 qcom: sdm845: add RB3 sensors DSP firmware
253cc17 amdgpu: Update DMCUB for DCN314 & Yellow Carp
07f05b0 Merge branch 'dmc-adlp_2.20-mtl_2.13' of git://anongit.freedesktop.org/drm/drm-firmware
5a251ed Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
6c8ce49 ice: add LAG-supporting DDP package
fd6e13c i915: Update MTL DMC to v2.13
41e615c i915: Update ADLP DMC to v2.20
c8424cf cirrus: Add CS35L41 firmware for Dell Oasis Models
b6ea35f copy-firmware: Fix linking directories when using compression
0a51959 copy-firmware: Fix test: unexpected operator
b602d43 qcom: sc8280xp: LENOVO: remove directory sym link
e0bad5e qcom: sc8280xp: LENOVO: Remove execute bits
59fbffa amdgpu: update VCN 4.0.0 firmware
22fb12f amdgpu: add initial SMU 13.0.10 firmware
b3f512f amdgpu: add initial SDMA 6.0.3 firmware
b1a7d76 amdgpu: add initial PSP 13.0.10 firmware
d6d655a amdgpu: add initial GC 11.0.3 firmware
c782458 Merge branch 'v2.0.21961' of https://github.com/yunfei-mtk/linux_fw_10bit
ca9086f Merge branch 'dg2_mtl_guc_70.8' of git://anongit.freedesktop.org/drm/drm-firmware
0bc3126 linux-firmware: Update AMD fam17h cpu microcode
b250b32 linux-firmware: Update AMD cpu microcode
9dfcace amdgpu: update green sardine VCN firmware
b519832 amdgpu: update renoir VCN firmware
5f569aa amdgpu: update raven VCN firmware
868bb36 amdgpu: update raven2 VCN firmware
6fa9a17 amdgpu: update Picasso VCN firmware
cd52460 amdgpu: update DMCUB to v0.0.175.0 for various AMDGPU ASICs
4ef7581 Updated NXP SR150 UWB firmware
2514504 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
45f5ebf wfx: update to firmware 3.16.1
f41d890 mediatek: Update mt8195 SCP firmware to support 10bit mode
6f3a37f i915: update DG2 GuC to v70.8.0
0ee23bd i915: update to GuC 70.8.0 and HuC 8.5.1 for MTL
1a76e8b cirrus: Add CS35L41 firmware for ASUS ROG 2023 Models
d3f6606 Partially revert "amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5"
8917650 linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
7d9af09 linux-firmware: update firmware for MT7922 WiFi device
0bab5df Merge tag 'iwlwifi-fw-2023-06-29' of http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
3ec3817 linux-firmware: Update firmware file for Intel Bluetooth AX203
7db3ef9 linux-firmware: Update firmware file for Intel Bluetooth AX203
5684048 linux-firmware: Update firmware file for Intel Bluetooth AX211
3f7a24e linux-firmware: Update firmware file for Intel Bluetooth AX211
eb2c745 linux-firmware: Update firmware file for Intel Bluetooth AX210
4a3ff0a linux-firmware: Update firmware file for Intel Bluetooth AX200
1d1bad4 linux-firmware: Update firmware file for Intel Bluetooth AX201
db39dff Fix qcom ASoC tglp WHENCE entry
a687f89 Merge branch 'sc8280xp-audio-fw' of git://git.kernel.org/pub/scm/linux/kernel/git/srini/linux-firmware
9e0343c check_whence: Check link targets are valid
b255f5b iwlwifi: add new FWs from core80-39 release
fa5d30b iwlwifi: update cc/Qu/QuZ firmwares for core80-39 release
f9a35b3 qcom: Add Audio firmware for SC8280XP X13s
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 10 Aug 2023 16:03:43 +0000 (18:03 +0200)]
mbedtls: Update to version 2.28.4
This only fixes minor problems.
Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Fri, 11 Aug 2023 05:10:17 +0000 (07:10 +0200)]
hostapd: add missing #ifdef for non-802.11ax builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Thu, 10 Aug 2023 18:59:11 +0000 (20:59 +0200)]
uci: update to git HEAD
3cda251 file: Fix uci -m import command
5781664 remove internal usage of redundant uci_ptr.last
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Zhen XIN [Tue, 4 Jul 2023 09:44:01 +0000 (09:44 +0000)]
build: Add option KERNEL_KASAN_SW_TAGS and HW_TAGS
Currently KASAN is supported but only the generic one. SW-tag and HW-tag
based KASAN have less impact on memory footprint or performance, and are
worth supporting.
Add choice menu for software and hardware Tag-Based KASAN, in addition
to the generic one.
Signed-off-by: Zhen XIN <zhen.xin@nokia-sbell.com>
[Restructure commit message]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tomasz Maciej Nowak [Fri, 7 Jul 2023 19:13:35 +0000 (21:13 +0200)]
mvebu: mcbin-singleshot: enable hearbeat LED by default
This has been a part of modified upstream patch but got lost on major
kernel bump to 5.15, so bring it back.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
[Add patch for kernel 6.1 too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Thu, 10 Aug 2023 16:33:04 +0000 (18:33 +0200)]
hostapd: reimplement AP/STA support via ucode
Drop obsolete control interface patches.
This fixes some corner cases in the previous code where the segment 0 center
frequency was not adjusted properly, leading to logspam and non-working AP
interfaces.
Additionally, shutting down the AP was broken, because the next beacon update
would re-enable it, leading to a race condition on assoc.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 10 Aug 2023 19:19:58 +0000 (21:19 +0200)]
hostapd: remove config_id parameters from hostapd.conf
They are no longer used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Linus Walleij [Mon, 7 Aug 2023 21:58:24 +0000 (23:58 +0200)]
gemini: Fix up kernel v6.1 config
The v6.1 kernel has moved around the options for the RTL8366RB
DSA switch used in the DIR-685 so it was missing when building
the kernel. Fix it up by adding the right Kconfig options.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Felix Fietkau [Thu, 10 Aug 2023 16:11:09 +0000 (18:11 +0200)]
ubus: update to the latest version
f787c97b3489 libubus: add missing uloop_fd_delete call in ubus_shutdown
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 10 Aug 2023 14:32:08 +0000 (16:32 +0200)]
hostapd: add missing ucv_get call in wpa_supplicant
Should be harmless, but fix it just in case
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 10 Aug 2023 12:01:27 +0000 (14:01 +0200)]
hostapd: clone prototypes of ucode bss/interface objects
Fixes an issue where lookup would return different objects than the ones intended
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stefan Kalscheuer [Sun, 18 Jun 2023 16:54:29 +0000 (18:54 +0200)]
mwlwifi: fix 6.1 Kernel support
Remove force_uaccess_* API usage.
Replace calls from pci-dma-compat.h
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Robert Marko [Wed, 9 Aug 2023 16:29:00 +0000 (18:29 +0200)]
qualcommax: remove upstreamed TRIM quirks
TRIM disable quirks for eMMC-s were merged upstreamed and backported to
stable in 6.1.39, however they were not dropped during the kernel update
and quilt is not complaining at all.
So, lets manually remove them as they are part of 6.1.39 [1] [2].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/mmc/core/quirks.h?h=v6.1.39&id=
182bf07a24c4c1022bf83c90be619d60427745c3
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/mmc/core/quirks.h?h=v6.1.39&id=
69bc3203513c4fcd6ca84b0185de454bacf87883
Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Wed, 9 Aug 2023 16:25:40 +0000 (18:25 +0200)]
qualcommax: refresh kernel config
Refresh the kernel config to keep in sync with the generic one.
Signed-off-by: Robert Marko <robimarko@gmail.com>
John Audia [Tue, 8 Aug 2023 23:55:51 +0000 (19:55 -0400)]
kernel: bump 6.1 to 6.1.44
Changelog: https://lore.kernel.org/stable/
2023080822-repost-unfiled-2f01@gregkh/
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Thu, 10 Aug 2023 00:39:02 +0000 (20:39 -0400)]
kernel: bump 6.1 to 6.1.43
1. Disable Ampere errata fix in target/linux/generic/config-6.1
2. Update kernel Changelog: https://lore.kernel.org/stable/
2023061431-modular-data-8489@gregkh/
Manually rebased:
bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch
bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch
bcm27xx/patches-6.1/950-0520-xhci-constrain-XHCI_VLI_HUB_TT_QUIRK-to-old-firmware.patch
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Tue, 8 Aug 2023 23:57:20 +0000 (19:57 -0400)]
kernel: bump 5.15 to 5.15.125
1. Add new symbols to generic config
2. Bump kernel
Changelog: https://lore.kernel.org/stable/
2023080818-groin-gradient-a031@gregkh/
All patches automatically rebased.
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Thu, 3 Aug 2023 17:53:47 +0000 (13:53 -0400)]
kernel: bump 5.15 to 5.15.124
Changelog: https://lore.kernel.org/stable/
2023080341-curliness-salary-4158@gregkh/
1. Needed to make a change to to package/kernel/linux/modules/netsupport.mk
due to upstream moving vxlan to its own directory[1]. @john-tho suggested
using the the 6.1 xvlan FILES to circumvent.
2. All patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.124&id=
77396fa9096abdbfbb87d63e73ad44d5621cf103
Signed-off-by: John Audia <therealgraysky@proton.me>
Ivan Pavlov [Fri, 4 Aug 2023 12:28:12 +0000 (15:28 +0300)]
openssl: update to 3.0.10
Changes between 3.0.9 and 3.0.10 [1 Aug 2023]
* Fix excessive time spent checking DH q parameter value ([CVE-2023-3817])
* Fix DH_check() excessive time with over sized modulus ([CVE-2023-3446])
* Do not ignore empty associated data entries with AES-SIV ([CVE-2023-2975])
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
Linhui Liu [Tue, 8 Aug 2023 08:26:07 +0000 (16:26 +0800)]
toolchain/binutils: add support for version 2.41
Release notes:
https://sourceware.org/pipermail/binutils/2023-July/128719.html
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Felix Fietkau [Wed, 9 Aug 2023 08:51:46 +0000 (10:51 +0200)]
hostapd: fix typo in ssid variable for non-supplicant mesh interface bringup
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 9 Aug 2023 08:50:53 +0000 (10:50 +0200)]
mac80211: fix setting mesh parameters after hostapd reload change
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 8 Aug 2023 18:12:11 +0000 (20:12 +0200)]
mac80211: fix applying tx/rx antenna changes afer hostapd reload change
Tear down all interfaces if the antenna settings change, so that the
capabilities can be recalculated properly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 8 Aug 2023 18:11:42 +0000 (20:11 +0200)]
hostapd: add extra sanity checks for config reload
Avoid getting stuck because of bad configurations
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 7 Aug 2023 20:01:57 +0000 (22:01 +0200)]
hostapd: fix bss color CCA issue with multiple wifi interfaces
Fixes this error: hostapd: nl80211: kernel reports: integer out of range
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Fri, 9 Jun 2023 11:39:52 +0000 (13:39 +0200)]
mediatek: add support for Acer Predator W6
Hardware
--------
SOC: MediaTek MT7986A
RAM: 1GB DDR4
FLASH: 4GB eMMC
WiFi: 2x2 2.4 GHz 802.11 b/g/n/ax MT7916 DBDC
4x4 5 GHz 802.11 a/n/ac/ax MT7986
2x2 6 GHz 802.11ax MT7916 DBDC
ETH: 4x LAN 1Gbit/s (MT7531)
1x WAN 2.5Gbit/s (GPY211)
BTN: RESET, WPS
LED: Antenna LEDs (GPIO)
Mood-LED (Kinetic KTD2601) - unsupported
UART: Header nest to USB port - 3V3 115200 8N1
[BUTTON] GND - RX - TX [USB]
Installation
------------
1. Connect to the device using serial console.
2. Interrupt the Autoboot process when promted by sending '0' twice.
3. Serve the OpenWrt initramfs image using TFTP at 192.168.1.66. Name
the image "predator.bin" and conenct the TFTP server to the routers
LAN port.
4. Configure U-Boot to allow loading unsigned images from MMC
$ setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000;
fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000';
saveenv
5. Transfer the image from U-Boot
$ setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1;
tftpboot 0x46000000 predator.bin; fdt addr $(fdtcontroladdr);
fdt rm /signature; bootm
6. Wait for OpenWrt to boot
7. Transfer the OpenWrt sysupgrade image to the router using scp.
8. Install OpenWrt using sysupgrade.
Signed-off-by: David Bauer <mail@david-bauer.net>
Christian Marangi [Fri, 4 Aug 2023 23:58:29 +0000 (01:58 +0200)]
CI: provide new required secret for S3 endpoint and bucket name
Provide new required secret for S3 endpoint and bucket name to permit an
easier migration to new services.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Fri, 4 Aug 2023 23:55:11 +0000 (01:55 +0200)]
CI: generilize S3 secret keys name and rename to proper name
Generilize S3 secret keys and rename to make them not platform specific.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Daniel Golle [Thu, 3 Aug 2023 22:30:25 +0000 (23:30 +0100)]
mediatek: filogic: restore non-const type in pinctrl-mt7988 driver
When building with Linux 5.15 the 'const' type results in warnings.
Restore the original non-const type in those cases.
Fixes: 36d0aa9c2d ("mediatek: filogic: sync pinctrl-mt7988 with MediaTek SDK")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Thu, 3 Aug 2023 16:47:15 +0000 (18:47 +0200)]
hostapd: fix unused device removal on DBDC devices
Check the phy before removing unrelated netdevs on the same hw device
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Mon, 31 Jul 2023 23:08:56 +0000 (00:08 +0100)]
mediatek: filogic: update MT7988 device tree
* move ethernet to mt7988a.dtsi
* move switch definition to mt7988a.dtsi
* add PHY LEDs
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 31 Jul 2023 23:04:56 +0000 (00:04 +0100)]
mediatek: filogic: sync pinctrl-mt7988 with MediaTek SDK
Update pinctrl driver for the MT7988 with driver from mtk-openwrt-feeds.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 1 Aug 2023 17:04:24 +0000 (18:04 +0100)]
kernel: netdevices: add driver for Marvell 10G Ethernet PHYs
Package kernel module for Marvell 10G Ethernet PHYs found also in many
10G/1G/100M/10M RJ-45 SFP+ modules.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Stijn Tintel [Fri, 28 Jul 2023 19:40:34 +0000 (22:40 +0300)]
xdp-tools: disable stack protector for BPF programs
When building xdp-tools with CONFIG_USE_LLVM_HOST=y, on a host that
enabled stack protector by default in Clang, compilation fails with the
following error:
CLANG xdp-dispatcher.o
clang-16: error: ignoring '-fstack-protector-strong' option as it is not currently supported for target 'bpfeb' [-Werror,-Woption-ignored]
Add -fno-stack-protector to BPF_CFLAGS to fix this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Nick Hainke [Wed, 2 Aug 2023 12:18:31 +0000 (14:18 +0200)]
tools/ccache: update to 4.8.2
Release Notes:
https://ccache.dev/releasenotes.html#_ccache_4_8_2
Refresh patch:
- 100-honour-copts.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Stefan Kalscheuer [Sun, 18 Jun 2023 15:06:57 +0000 (17:06 +0200)]
mvebu: add kernel 6.1 as testing kernel
With an initial set of patches and configs in place let's start testing
with kernel 6.1.
Run-tested on the cortexa9 subtarget (WRT1900ACS, Turris Omnia)
Tested-by: Etienne Champetier <champetier.etienne@gmail.com>
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Stefan Kalscheuer [Sun, 18 Jun 2023 15:04:18 +0000 (17:04 +0200)]
mvebu: copy 5.15 kconfigs to 6.1
Start 6.1 migration with a full copy of the current stable config.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Stefan Kalscheuer [Sun, 18 Jun 2023 15:01:00 +0000 (17:01 +0200)]
mvebu: refresh patches for 6.1
Remove the following patches:
100-ARM-dts-turris-omnia-configure-LED-0-pin-function-to [1]
101-ARM-dts-turris-omnia-enable-LED-controller-node [2]
702-net-next-ethernet-marvell-mvnetaMQPrioOffload [3]
703-net-next-ethernet-marvell-mvnetaMQPrioFlag [4]
704-net-next-ethernet-marvell-mvnetaMQPrioQueue [5]
705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload [6]
710-v6.2-phy-marvell-phy-mvebu-a3700-comphy-Reset-COMPHY-regi [7]
Manually rebased:
902-drivers-mfd-Add-a-driver-for-IEI-WT61P803-PUZZLE-MCU
All other patches automatically rebased
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
94a29bffdd59498382131fd428fed221f5c96def
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
40624346b7ae0c2b1209fc9993ea30699e512c50
[3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
75fa71e3acadbb4ab5eda18505277eb9a1f69b23
[4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
e7ca75fe6662f78bfeb0112671c812e4c7b8e214
[5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
e9f7099d0730341b24c057acbf545dd019581db6
[6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
2551dc9e398c37a15e52122d385c29a8b06be45f
[7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=
cd1e1735aeab49abc679218a79ee764c0d394880
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Stefan Kalscheuer [Sun, 18 Jun 2023 14:55:50 +0000 (16:55 +0200)]
mvebu: copy 5.15 patches to 6.1
To start migration to Kernel 6.1 we copy all existing patches from 5.15.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Rosen Penev [Wed, 2 Aug 2023 00:56:00 +0000 (17:56 -0700)]
tools/cmake: update to 3.27.1
Fix zstd linking again.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Felix Fietkau [Wed, 2 Aug 2023 11:18:03 +0000 (13:18 +0200)]
hostapd: fix undeclared variable in common.uc
Fixes: https://github.com/openwrt/openwrt/issues/13210
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 1 Aug 2023 11:43:07 +0000 (13:43 +0200)]
hostapd: fix mesh supplicant build error
Include AP ucode source file
Fixes: e56c5f7b276a ("hostapd: add ucode support, use ucode for the main ubus object")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Thu, 20 Jul 2023 16:32:13 +0000 (18:32 +0200)]
tracecmd: update to v3.2
ChangeLog:
46952ef trace-cmd: Version 3.2
f5871a1 libtracecmd: Version 1.4.0
d498af1 trace-cmd build: Add trace-attach.c to meson build
736df06 trace-cmd: Add initial support for meson
e183566 libtracecmd: Add initial support for meson
c508713 trace-cmd test: Quiet valgrind from reporting forked children
8ec026f trace-cmd test: Close handle after opening
4c179a6 trace-cmd library: Fix memory leaks of followers
aa21520 trace-cmd: Add Makefile target for memory test
925e15f trace-cmd and library: Update the version to the development
4fa31c0 trace-cmd attach: Add new command "attach"
7e721ef trace-cmd library: Add tracecmd_get_tsc2nsec() API
8908555 tracecmd library: Unlock records in tracecmd_iterate_events()
2668b13 trace-cmd agent: Add "IP" to -N argument in help message
22ad81e trace-cmd record: Remove redundant check of instance in allocate_instance()
d7ce897 libtracecmd: Free buf_from in error path of tracecmd_compress_copy_from()
6776d7a trace-cmd: Update v7 trace.dat documentation to clarify the strings section
9d6f3ba trace-cmd record/extract: Do not destroy existing instances
9c9d5ed trace-cmd extract: Do not extract top level unless told to
4b92132 libtracecmd: Fix tracecmd_compress_copy_from() write size return
f30abfd documentation: trace-cmd-report: Document filter scope
7a390c5 trace-cmd-report: Support global filters
04ad2c6 trace-cmd report: Ensure filter is applied to single input file
edf9424 trace-cmd: Open code execvp routine to avoid multiple execve syscalls
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 20 Jul 2023 16:29:27 +0000 (18:29 +0200)]
libtracefs: update to 1.7.0
ChangeLog:
aebab37 libtracefs: version 1.7
a3237c3 libtracefs: Add initial support for meson
b25019f libtarcefs doc: Add tracefs_kprobe_destroy() to index man page
4c2194f libtracefs doc: State that tracefs_dynevent_create() is needed for tracefs_kprobe_alloc()
df53d43 libtracefs Documentation: Add missing prototypes in top level man page
9a2df4a libtracefs: Update version to 1.7.dev
18ede68 libtracefs: Add tracefs_kprobe_destory() API
309b1ba libtracefs tests: Add helper function to destroy dynamic events
53dce80 tracefs: Add tracefs_time_conversion() API
5ea4128 libtracefs: Add tracefs_find_cid_pid() API
857dd3e libtracefs/utest: Fix crashing of synth test when synths exist
6332309 libtracefs/utest: Do not use synth for test_synth element
25cd206 libtracefs: Clarify the tracefs_synth_create() man page
6b6d43f libtracefs: Do not allow tracefs_synth_set_instance() on created synth
c860f93 libtracefs: Documentation for tracefs_synth_set_instance
0039173 libtracefs: New API to set synthetic event instance
e97c311 libtracefs: Do not segfault in tests if synthetic events are not configured
185019c libtracefs: Add tracefs_instance_tracers() API
6775d23 libtracefs: Do not use hwlat tracer and fdb_delete event for tests
5a1a01e libtracefs: Add stacktrace to tracefs_sql()
b1b234e libtracefs: Unit test for tracefs_instance_reset()
dd620f4 libtracefs: Documentation for tracefs_instance_reset()
789e82d libtracefs: New API to reset ftrace instance
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 20 Jul 2023 16:27:04 +0000 (18:27 +0200)]
libtraceevent: update to 1.7.3
ChangeLog:
dd14818 libtraceevent: version 1.7.3
0b9a34e libtraceevent: Handle printf '%+d" case
eba4a41 libtraceevent: Add initial support for meson
1d8ddb9 libtraceevent: Handle %c
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 19 Jul 2023 13:45:10 +0000 (15:45 +0200)]
tools/7z: update to 23.01
Release Notes:
https://sourceforge.net/p/sevenzip/discussion/45797/thread/
3f550826d8/#e950
Manually adjust:
- 7-zip-flags.patch
Automatically refresh:
- 7-zip-musl.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Felix Fietkau [Wed, 5 Jul 2023 12:51:19 +0000 (14:51 +0200)]
netifd: update to the latest version
8c2758b4fbbb wireless: add support for replacing data blobs at runtime
0ff22a6a68ce wireless: enable dynamic reconfiguration by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 26 May 2023 08:23:59 +0000 (10:23 +0200)]
hostapd: add ucode support, use ucode for the main ubus object
This implements vastly improved dynamic configuration reload support.
It can handle configuration changes on individual wifi interfaces, as well
as adding/removing interfaces.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 24 May 2023 08:23:13 +0000 (10:23 +0200)]
hostapd: switch to using uloop (integrated with built-in eloop)
Preparation for pulling in more code that uses uloop
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 21 Jul 2023 11:05:23 +0000 (13:05 +0200)]
hostapd: add support for querying assoc/probe IEs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 16 Mar 2023 10:35:50 +0000 (11:35 +0100)]
hostapd: add experimental radius server
This can be used to run a standalone EAP server that can be used from
other APs. It uses json as user database format and can automatically
handle reload.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Michał Kwiatek [Fri, 28 Jul 2023 13:59:44 +0000 (15:59 +0200)]
ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01862
Changelog from quic:
Bug fixes, stability improvements from previous releases
are present. There are no backward comatibility issues
with this release.
Reviewed-by: Robert Marko <robimarko@gmail.com>
Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600
Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
Daniel Golle [Mon, 31 Jul 2023 18:47:54 +0000 (19:47 +0100)]
uboot-mediatek: fix build for MT7629
Add patch to fix build failure caused by a missing header which had
previously been implicitely included.
Fixes: 6ddb5f5a65 ("uboot-mediatek: update to version 2023.07.02")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 31 Jul 2023 17:05:22 +0000 (18:05 +0100)]
mediatek: filogic: enable driver for MediaTek XS-PHY
Enable driver for MediaTek SuperSpeedPlus XS-PHY transceiver for the
USB3.1 GEN2 controllers found in the MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 31 Jul 2023 16:46:22 +0000 (17:46 +0100)]
uboot-mediatek: add missing 'memory' nodes to downstream boards
Among the patches adding support for MT7988 also came the switch to
use fdtdec_setup_mem_size_base() and no longer rely on CFG_SYS_SDRAM_BASE.
Take care of our downstream boards which did not have a 'memory' node in
their device trees.
Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Robert Marko [Mon, 31 Jul 2023 10:08:34 +0000 (12:08 +0200)]
qualcommax: ipq807x: fix Gen2 PCIe port
Gen2 PCIe port recently got broken on IPQ807x during update to 6.1.39 as
upstream backported:
("PCI: qcom: Remove PCIE20_ prefix from register definitions") [1]
So, fix it by adding a pending upstream fix for it [2].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/pci/controller/dwc/pcie-qcom.c?h=v6.1.39&id=
db962c7a711c3393a80a18219960cd54fb33c53d
[2] https://patchwork.kernel.org/project/linux-arm-msm/patch/
20230724063429.
3980462-1-quic_srichara@quicinc.com/
Fixes: fec22f8375b4 ("kernel: bump 6.1 to 6.1.39")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Daniel Golle [Mon, 31 Jul 2023 00:12:24 +0000 (01:12 +0100)]
arm-trusted-firmware-mediatek: fix PKG_MIRROR_HASH
Instead of using the hash of the Github-generated tarball use the
hash of the tarball generated by the OpenWrt build system (in this
case they are different, unfortunately).
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 07dbeb430e ("arm-trusted-firmware-mediatek: update to sources of 2023-07-24")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
John Audia [Thu, 27 Jul 2023 09:25:12 +0000 (05:25 -0400)]
kernel: bump 6.1 to 6.1.42
Manually rebased:
generic/pending-6.1/203-kallsyms_uncompressed.patch
All other patches automatically rebased.
Changelog: https://lore.kernel.org/stable/
2023072749-gumming-selector-a081@gregkh/
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Alexandru Gagniuc [Thu, 27 Jul 2023 15:51:33 +0000 (10:51 -0500)]
kernel: netsupport: Add kmod-sched-skbprio
Add support for the SKBPRIO queuing discipline. This is subtly
different than prio as it also drops packets from the lower priority
flows.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
John Audia [Thu, 27 Jul 2023 13:22:32 +0000 (09:22 -0400)]
kernel: bump 5.15 to 5.15.123
Manually rebased:
bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*]
Removed upstreamed:
backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1]
backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2]
pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3]
pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4]
bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5]
bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
02474292a44205c1eb5a03634ead155a3c9134f4
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
86b93cbfe104e99fd3d25a49748b99fb88101573
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
79b9ab357b6f5675007f4c02ff8765cbd8dc06a2
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
5899bc4058e89d5110a23797ff94439c53b77c25
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
95afd2c7c7d26087730dc938709e025a303e5499
Build system: x86/64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John Audia <therealgraysky@proton.me>
[rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Christian Marangi [Sun, 30 Jul 2023 09:30:19 +0000 (11:30 +0200)]
rtl8812au-ct: fix even more compilation error with kernel 6.1
Fix more compilation error with kernel 6.1 and make it possible to
compile.
Multiple fix are done due to kernel bump:
- PDE_DATA (now deprecated) to pde_data
- dev_addr now const and require some cast
- prandom_u32 (now deprecated) to get_random_u32
Also other minor fix for always true condition and tasklet type cast not
compatible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Shiji Yang [Thu, 22 Jun 2023 13:22:32 +0000 (21:22 +0800)]
ramips: mt7621-wdt: use phandle to access system controller registers
These patches allow the driver to access some watchdog registers via a
phandle to the system controller node[1]. To apply these changes, we
need to add "mediatek,sysctl" to the SoC dtsi. This commit also remove
the redundent clocks, interrupts and resets properties.
[1] https://lore.kernel.org/all/
20230214103936.
1061078-2-sergio.paracuellos@gmail.com
Tested on Motorola MWR03 (MT7628)
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 17 Jun 2023 11:30:59 +0000 (19:30 +0800)]
ramips: add proper system clock and reset driver support for legacy SoCs
This series of upstream patches properly implement a clock and reset
driver for old ralink SoCs[1]. And it includes some related fixes[2] and
improvements[3][4]. All patches have been merged into linux-next. They
will be part of upcoming Linux 6.5. In order to switch to the new system
controller driver, all clocks and resets properties in SoC dtsi have been
updated, and kernel symbol "CONFIG_CLK_MTMIPS" have been added to the
kernel config files.
[1] https://lore.kernel.org/all/
20230619040941.
1340372-1-sergio.paracuellos@gmail.com
[2] https://lore.kernel.org/all/
20230622-mips-ralink-clk-wuninitialized-v1-1-
ea9041240d10@kernel.org
[3] https://lore.kernel.org/all/OSYP286MB03120BABB25900E113ED42B7BC5CA@OSYP286MB0312.JPNP286.PROD.OUTLOOK.COM
[4] https://lore.kernel.org/all/TYAP286MB03151148AF8C054621DD55C3BC23A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
Tested on Motorola MWR03 (MT7628)
Tested on Haier HW-L1W (MT7620)
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 17 Jun 2023 11:30:59 +0000 (19:30 +0800)]
ramips: add proper system clock and reset driver support for mt7621
This series of upstream patches makes the system controller node as a
reset provider[1][2], and it also includes some clock and reset driver
fixes[3][4]. Meanwhile, all clocks and resets properties in the SoC
device tree have been updated to be compatible with the new driver.
[1] https://lore.kernel.org/r/
20220110114930.
1406665-2-sergio.paracuellos@gmail.com
[2] https://lore.kernel.org/r/
20220210094859.927868-2-sergio.paracuellos@gmail.com
[3] https://lore.kernel.org/r/
20221217074806.
3225150-1-sergio.paracuellos@gmail.com
[4] https://lore.kernel.org/r/
20230206083305.147582-1-sergio.paracuellos@gmail.com
Tested on RAISECOM MSG1500 X.00
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Nick Hainke [Sat, 29 Jul 2023 15:58:31 +0000 (17:58 +0200)]
toolchain: gcc: updat to 13.2
Release Notes:
https://gcc.gnu.org/pipermail/gcc/2023-July/242148.html
Remove upstreamed patches:
- patches-13.x/001-rtl-optimization-109585-alias-analysis-typo.patch
- patches-13.x/700-RISCV-Inline-subword-atomic-ops.patch
- patches-13.x/701-riscv-linux-Don-t-add-latomic-with-pthread.patch
Refresh patches:
- patches-13.x/10-mbsd_multi.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rafał Miłecki [Sun, 30 Jul 2023 10:40:05 +0000 (12:40 +0200)]
urngd: fix archived tar hash
Due to some hiccup my local urngd-2023-07-25-
7aefb47b.tar.xz ended up
being different from archived one. Repackaging it locally confirmed the
previous hash was incorrect.
Fixes: c74b5e09e692 ("urngd: update to the latest master")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 29 Jul 2023 23:00:09 +0000 (01:00 +0200)]
kernel: backport proper fix for mtd preventing devices probing
Improper of_platform_populate() call caused issue with probing devices
drivers.
Fixes: 41e1e838fbbb ("kernel: backport mtd patch adding of_platform_populate() calls")
Fixes: #10232
Ref:
79af0593a30b ("kernel: switch back 5.15 to fw_devlink=permissive")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 29 Jul 2023 15:02:28 +0000 (17:02 +0200)]
bcm53xx: backport more DT changes queued for v6.6
Those sort out BCM53573 Ethernet info finally.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Shiji Yang [Sat, 29 Jul 2023 13:24:10 +0000 (21:24 +0800)]
ramips: pinctrl: support requesting different functions for same group
MT7620 wireless radio needs change the pin group function between
"gpio" and "pa" during the calibration process. However, ralink
pinctrl driver doesn't support requesting different functions for
the same group. This patch enables pinctrl consumers to perform
such operations.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 29 Jul 2023 13:24:09 +0000 (21:24 +0800)]
mac80211: rework MT7620 PA/LNA RF calibration
This patch makes some improvements to the MT7620 RF calibration.
1. Move MT7620 PA/LNA calibration code to dedicated functions.
2. Restore RF and BBP registers before R-Calibration.
3. Do Rx DCOC calibration again before RXIQ calibration.
4. Use SoC specific AGC initial LNA value.
5. Correct MAC_RX_EN mask in rt2800_r_calibration()[1].
[1] This change may fix the "BBP/RF register access failed" error:
ieee80211 phy0: rt2800_wait_bbp_rf_ready: Error - BBP/RF register access failed, aborting
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Daniel Golle [Sat, 22 Jul 2023 17:55:32 +0000 (18:55 +0100)]
uboot-mediatek: add patches for MT7988 and builds for RFB
Import pending patches adding support for MT7988 and provide builds
for the reference board for all possible boot media.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 14:50:27 +0000 (15:50 +0100)]
uboot-mediatek: update to version 2023.07.02
Release 2023.07 got tagged wrongly and replaced by follow-up release
2023.07.02.
Now using upstream DTS for BPi-R3.
Removed two patches which made it upstream, refreshed the rest.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 14:12:27 +0000 (15:12 +0100)]
arm-trusted-firmware-mediatek: update to sources of 2023-07-24
Use updated Trusted Firmware-A sources from MediaTek, now stacked
on top of the ARM Trusted Firmware-A v2.9 release.
Add builds for the newly added MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 14:10:54 +0000 (15:10 +0100)]
arm-trusted-firmware-tools: update to version 2.9
147f52f3e feat(fiptool): add cca, core_swd, plat cert in FIP
0aaa382fe fix(sptool): fix concurrency issue for SP packages
cb666b39d Merge "fix(sptool): fix concurrency issue for SP packages" into integration
0be2475f6 fix: 'sp_mk_generator.py' reference to undef var
1a28f290b fix(sptool): operators "is/is not" in sp_mk_gen.py
cf2dd17dd refactor(security): add OpenSSL 1.x compatibility
4daeaf341 fix(sptool): add dependency to SP image
06e69f7c9 feat(fiptool): handle FIP in a disk partition
5a53c6c66 Merge "feat(fiptool): handle FIP in a disk partition" into integration
034a2e3ef refactor(fiptool): move plat_fiptool.mk to tools
0165ddd7c build(fiptool): add object dependency generation
c89fdb4a5 Merge "refactor(fiptool): move plat_fiptool.mk to tools" into integration
1b491eead fix(tree): correct some typos
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Oli Ze [Thu, 27 Jul 2023 05:23:12 +0000 (07:23 +0200)]
uboot-mvebu: update to version 2023.07.02
Since 2021.07 multiple bugs were introduced that made it impossible to
create a bootable target for mvebu. Those issues should be now fixed since
2023.07-rc1.
References: #11661
Signed-off-by: Oli Ze <olze@trustserv.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs
Signed-off-by: Petr Štetiar <ynezz@true.cz> [facelift]
Rafał Miłecki [Fri, 28 Jul 2023 16:53:20 +0000 (18:53 +0200)]
ramips: use NVMEM cells with mt76 EEPROM for Netgear R6220 & WNDR3700 v5
This uses new upstream DT binding. It's more generic (NVMEM) compared to
the old one (MTD).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 28 Jul 2023 16:48:34 +0000 (18:48 +0200)]
ramips: use fixed layout cell "mac-base" for Netgear WNDR3700 v5
This drops a use of downstream "mac-address-increment".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 21 Jul 2023 05:34:25 +0000 (07:34 +0200)]
ath79: replace "mac-address-ascii" with "mac-base"
With upstream accepted "mac-base" binding there is no need for a
downstream "mac-address-ascii" workaround anymore.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Karsten Sperling [Thu, 16 Mar 2023 01:17:26 +0000 (14:17 +1300)]
build: make git sub-modules to fetch configurable
Currently the git protocol downloads all submodules of the target
repository. This can be unwieldy for repositories with a lot of submodules
where only a subset are required in the context of the OpenWrt build.
This change adds a PKG_SOURCE_SUBMODULES variable to configure this
behavior. It takes a space-separated list of submodule paths, or the word
"skip" to disable submodule downloads entirely. The default is to download
all submodules, i.e. preserving current behavior.
Signed-off-by: Karsten Sperling <ksperling@apple.com>
Petr Štetiar [Fri, 28 Jul 2023 06:20:57 +0000 (08:20 +0200)]
mediatek: filogic: fix broken sysupgrade script
Changes introduced in commit
54dc1cde48a4 ("mediatek: filogic: add
support for Xiaomi WR30U") missed to end the case item with mandatory
`;;` which lead to a broken sysupgrade.
Fixes: 54dc1cde48a4 ("mediatek: filogic: add support for Xiaomi WR30U")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Thu, 20 Jul 2023 06:41:44 +0000 (08:41 +0200)]
toolchain: kernel-headers: remove debugging env dump
Remove debugging `env` dump left over as build environments might
contain some sensitive information, which then might leak into the build
logs.
Fixes: 2105acbe2804 ("kernel-headers: fix compile error caused by wrong host include path when the toolchain is already built")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Thu, 20 Jul 2023 13:48:39 +0000 (15:48 +0200)]
toolchain: kernel-headers: fix check target for external Git trees
Executing following command currently fails:
$ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1
...
include/kernel-version.mk:11: *** Missing kernel version/hash file for . Please create include/kernel-. Stop.
So lets fix it by adding the necessary missing KERNEL_PATCHVER variable.
That additional kernel-build.mk include is needed to add another set of
missing variables:
$ make toolchain/kernel-headers/{download,check} V=sc FIXUP=1
...
Makefile:115: *** ERROR: Unknown pack format for file tmp/dl/. Stop.
Fixes: 0765466a42f4 ("kernel: split kernel version to dedicated files")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Thu, 29 Jun 2023 12:29:02 +0000 (14:29 +0200)]
ipq807x: prpl-haze: fix sysupgrade flashing from bootloader
While flashing sysupgrade image from U-Boot, then the rootfs_data
overlay filesystem formatting is left for the fstools during firstboot,
but that wont work as mkfs.f2fs is missing in the sysupgrade image:
mount_root: overlay filesystem in /dev/loop0 has not been formatted yet
mount_root: no usable overlay filesystem found, using tmpfs overlay
sh: mkfs.f2fs: not found
Filesystem Size Used Available Use% Mounted on
/dev/loop0 139.6M 46.9M 92.6M 34% /overlay
Number Start (sector) End (sector) Size Code Name
20 98850 406349 150.1 MiB FFFF rootfs
So lets fix it by adding f2fs support to the sysupgrade image.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Hank Moretti [Wed, 26 Jul 2023 14:39:16 +0000 (14:39 +0000)]
mediatek: filogic: add specific layout for WR30U
Because this device enable NMBM by default, most users use custom
U-Boot with NMBM-Enabled in Chinese forums.
This layout is the same as the ubootmod layout but enabling NMBM.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
Hank Moretti [Fri, 21 Jul 2023 03:54:52 +0000 (03:54 +0000)]
mediatek: filogic: add support for Xiaomi WR30U
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: ESMT F50L1G41LB 128MB
RAM: NT52B128M16JR-FL 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Flash instructions:
1. Get ssh access
link: https://forum.openwrt.org/t/openwrt-support-for-xiaomi-ax3000ne/153769/22
2. Backup import partitions
```
dev: size erasesize name
mtd1:
00100000 00020000 "BL2"
mtd2:
00040000 00020000 "Nvram"
mtd3:
00040000 00020000 "Bdata"
mtd4:
00200000 00020000 "Factory"
mtd5:
00200000 00020000 "FIP"
mtd8:
02200000 00020000 "ubi"
mtd9:
02200000 00020000 "ubi1"
mtd12:
00040000 00020000 "KF"
```
Use these commands blow to backup your stock partitions.
```
nanddump -f /tmp/BL2.bin /dev/mtd1
nanddump -f /tmp/Nvram.bin /dev/mtd2
nanddump -f /tmp/Bdata.bin /dev/mtd3
nanddump -f /tmp/Factory.bin /dev/mtd4
nanddump -f /tmp/FIP.bin /dev/mtd5
nanddump -f /tmp/ubi.bin /dev/mtd8
nanddump -f /tmp/KF.bin /dev/mtd12
```
Then, transfer them to your computer via scp, netcat, tftp
or others and keep them in a safe place.
3. Setup Nvram
Get the current stock: `cat /proc/cmdline`
If you find `firmware=0` or `mtd=ubi`, use these commands:
```
nvram set boot_wait=on
nvram set uart_en=1
nvram set flag_boot_rootfs=1
nvram set flag_last_success=1
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
```
If you find `firmware=1` or `mtd=ubi1`, use these commands:
```
nvram set boot_wait=on
nvram set uart_en=1
nvram set flag_boot_rootfs=0
nvram set flag_last_success=0
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
```
4. Flash stock-initramfs-factory.ubi
If you find `firmware=0` or `mtd=ubi`:
`ubiformat /dev/mtd9 -y -f /tmp/stock-initramfs-factory.ubi`
If you find `firmware=1` or `mtd=ubi1`:
`ubiformat /dev/mtd8 -y -f /tmp/stock-initramfs-factory.ubi`
Then reboot your router, it should boot to the openwrt
initramfs system now.
5. Setup uboot-env
Now it will be setup automatically in upgrade process,
you can skip this step.
If your `fw_setenv` did not work, you need run this command:
`echo "/dev/mtd1 0x0 0x10000 0x20000" > /etc/fw_env.config`
Then setup uboot-env:
```
fw_setenv boot_wait on
fw_setenv uart_en 1
fw_setenv flag_boot_rootfs 0
fw_setenv flag_last_success 1
fw_setenv flag_boot_success 1
fw_setenv flag_try_sys1_failed 8
fw_setenv flag_try_sys2_failed 8
fw_setenv mtdparts "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),
2048k(factory),2048k(fip),256k(crash),256k(crash_log),
34816k(ubi),34816k(ubi1),32768k(overlay),12288k(data),256k(KF)"
```
6. Flash stock-squashfs-sysupgrade.bin
Use shell command:
`sysupgrade -n /tmp/stock-squashfs-sysupgrade.bin`
Or go to luci web.
If you need to change to Openwrt U-Boot layout, do next. If you
do not need, please ignore it.
Change to OpenWrt U-Boot:
1. Flash ubootmod-initramfs-factory.ubi
Check mtd partitions: `cat /proc/mtd`
```
mtd7:
00040000 00020000 "KF"
mtd8:
02200000 00020000 "ubi_kernel"
mtd9:
04e00000 00020000 "ubi"
```
Run following command:
`ubiformat /dev/mtd8 -y -f /tmp/ubootmod-initramfs-factory.ubi`
Then reboot your router, it should boot to the openwrt initramfs
system now.
2. Check mtd again
```
mtd7:
00040000 00020000 "KF"
mtd8:
07000000 00020000 "ubi"
```
Make sure mtd8 is ubi.
3. Install kmod-mtd-rw
Run command: `opkg update && opkg install kmod-mtd-rw`
Or get it in openwrt server, or build it yourself, then install
it manually
Then run this command:
`insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
4. Clean up pstore
Run Command: `rm -f /sys/fs/pstore/*`
5. Format ubi and create new ubootenv volume
```
ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
```
6. (Optional) Add recovery boot feature.
```
ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB
ubiupdatevol /dev/ubi0_2 /tmp/ubootmod-initramfs-recovery.itb
```
7. Flash Openwrt U-Boot
```
mtd write /tmp/ubootmod-preloader.bin BL2
mtd write /tmp/ubootmod-bl31-uboot.fip FIP
```
6. Flash ubootmod-squashfs-sysupgrade.itb
Use shell command:
`sysupgrade -n /tmp/ubootmod-squashfs-sysupgrade.itb`
Or go to luci web.
Now everything is done, Enjoy!
Go Back to stock from Openwrt U-Boot:
1. Force flash ubootmod-initramfs-recovery.itb
Use shell command:
`sysupgrade -F -n /tmp/ubootmod-initramfs-recovery.itb`
Or go to luci web.
Then it should boot to the openwrt initramfs system now.
2. Format ubi and Nvram
```
ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8
mtd erase Nvram
```
3. Install kmod-mtd-rw
Run command: `opkg update && opkg install kmod-mtd-rw`
Or get it in openwrt server, or build it yourself, then install
it manually
Then run this command:
`insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
4. Flash stock U-Boot and ubi
```
mtd write /tmp/BL2.bin BL2
mtd write /tmp/FIP.bin FIP
mtd write /tmp/ubi.bin ubi
```
Then reboot your router, waiting it finished rollback in minutes.
Go Back to stock from stock layout Openwrt:
Just run command: `ubiformat /dev/mtd8 -y -f /tmp/ubi.bin`
Then reboot your router, waiting it finished rollback in minutes.
Notes:
1. Openwrt U-Boot and ubootmod openwrt did not enable NMBM.
Please make your backup safe.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
Hank Moretti [Thu, 20 Jul 2023 17:42:58 +0000 (17:42 +0000)]
uboot-mediatek: add support for Xiaomi WR30U
Add a custom uboot build to support openwrt uboot layout.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
Jo-Philipp Wich [Thu, 27 Jul 2023 11:31:18 +0000 (13:31 +0200)]
procd: improve status reporting for partially running services
The existing implementation incorrectly reported `running` for services
without any instances or with all instances stopped/terminated.
Improve the default implementation of `/etc/init.d/* status` to properly
report services with not running instances. In case a service exists,
but without running instance, the status call will now report
"not running" with exit code 5. In case some instances are running and
some are stopped/terminated, the call will report "running (X/Y)" where
`X` denoted the amount of running instances and `Y` the amount of total
registered ones.
Ref: https://forum.openwrt.org/t/x/159443
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 27 Jul 2023 09:27:46 +0000 (11:27 +0200)]
libnl-tiny: update to latest Git HEAD
8667347 build: allow passing SOVERSION value for dynamic library
Also adjust packaging of the library to only ship the SOVERSION
suffixed library object, to allow for concurrent installation of
ABI-incompible versions in the future.
Fixes: #13082
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Florian Eckert [Wed, 19 Jul 2023 09:54:25 +0000 (11:54 +0200)]
.gitignore: ignore link if target is included from feed
If an out of tree target is included via a feed, then there is a link with
the name 'feed' in the target directory. Do not show this link in git.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
John Audia [Mon, 24 Jul 2023 23:03:23 +0000 (19:03 -0400)]
kernel: bump 6.1 to 6.1.41
No patches modified; just refresh checksums.
Build system: x86/64
Build-tested: x86/64
Run-tested: x86/64
Signed-off-by: John Audia <therealgraysky@proton.me>
projects / openwrt / staging / robimarko.git / log