Alexey Dobriyan [Fri, 31 Jan 2020 06:17:04 +0000 (22:17 -0800)]
fs/binfmt_elf.c: coredump: allocate core ELF header on stack
Comment says ELF header is "too large to be on stack". 64 bytes on
64-bit is not large by any means.
Link: http://lkml.kernel.org/r/20191222143850.GA24341@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 31 Jan 2020 06:17:01 +0000 (22:17 -0800)]
fs/binfmt_elf.c: make BAD_ADDR() unlikely
If some mapping goes past TASK_SIZE it will be rejected by kernel which
means no such userspace binaries exist.
Mark every such check as unlikely.
Link: http://lkml.kernel.org/r/20191215124355.GA21124@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 31 Jan 2020 06:16:58 +0000 (22:16 -0800)]
fs/binfmt_elf.c: better codegen around current->mm
"current->mm" pointer is stable in general except few cases one of which
execve(2). Compiler can't treat is as stable but it _is_ stable most of
the time. During ELF loading process ->mm becomes stable right after
flush_old_exec().
Help compiler by caching current->mm, otherwise it continues to refetch
it.
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-141 (-141)
Function old new delta
elf_core_dump 5062 5039 -23
load_elf_binary 5426 5308 -118
Note: other cases are left as is because it is either pessimisation or
no change in binary size.
Link: http://lkml.kernel.org/r/20191215124755.GB21124@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 31 Jan 2020 06:16:55 +0000 (22:16 -0800)]
fs/binfmt_elf.c: don't copy ELF header around
ELF header is read into bprm->buf[] by generic execve code.
Save a memcpy and allocate just one header for the interpreter instead
of two headers (64 bytes instead of 128 on 64-bit).
Link: http://lkml.kernel.org/r/20191208171242.GA19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 31 Jan 2020 06:16:52 +0000 (22:16 -0800)]
fs/binfmt_elf.c: fix ->start_code calculation
Only executable segments should be accounted to ->start_code just like
they do to ->end_code (correctly).
Link: http://lkml.kernel.org/r/20191208171410.GB19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Fri, 31 Jan 2020 06:16:50 +0000 (22:16 -0800)]
fs/binfmt_elf.c: smaller code generation around auxv vector fill
Filling auxv vector as array with index (auxv[i++] = ...) generates
terrible code. "saved_auxv" should be reworked because it is the worst
member of mm_struct by size/usefullness ratio but do it later.
Meanwhile help gcc a little with *auxv++ idiom.
Space savings on x86_64:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-127 (-127)
Function old new delta
load_elf_binary 5470 5343 -127
Link: http://lkml.kernel.org/r/20191208172301.GD19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Fri, 31 Jan 2020 06:16:47 +0000 (22:16 -0800)]
lib/find_bit.c: uninline helper _find_next_bit()
It saves 25% of .text for arm64, and more for BE architectures.
Before:
$ size lib/find_bit.o
text data bss dec hex filename
1012 56 0 1068 42c lib/find_bit.o
After:
$ size lib/find_bit.o
text data bss dec hex filename
776 56 0 832 340 lib/find_bit.o
Link: http://lkml.kernel.org/r/20200103202846.21616-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Fri, 31 Jan 2020 06:16:43 +0000 (22:16 -0800)]
lib/find_bit.c: join _find_next_bit{_le}
_find_next_bit and _find_next_bit_le are very similar functions. It's
possible to join them by adding 1 parameter and a couple of simple
checks. It's simplify maintenance and make possible to shrink the size
of .text by un-inlining the unified function (in the following patch).
Link: http://lkml.kernel.org/r/20200103202846.21616-2-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yury Norov [Fri, 31 Jan 2020 06:16:40 +0000 (22:16 -0800)]
uapi: rename ext2_swab() to swab() and share globally in swab.h
ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.
There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h
ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.
Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nathan Chancellor [Fri, 31 Jan 2020 06:16:37 +0000 (22:16 -0800)]
lib/scatterlist.c: adjust indentation in __sg_alloc_table
Clang warns:
../lib/scatterlist.c:314:5: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
return -ENOMEM;
^
../lib/scatterlist.c:311:4: note: previous statement is here
if (prv)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/830
Fixes: edce6820a9fd ("scatterlist: prevent invalid free when alloc fails")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikhail Zaslonko [Fri, 31 Jan 2020 06:16:33 +0000 (22:16 -0800)]
btrfs: use larger zlib buffer for s390 hardware compression
In order to benefit from s390 zlib hardware compression support,
increase the btrfs zlib workspace buffer size from 1 to 4 pages (if s390
zlib hardware support is enabled on the machine).
This brings up to 60% better performance in hardware on s390 compared to
the PAGE_SIZE buffer and much more compared to the software zlib
processing in btrfs. In case of memory pressure, fall back to a single
page buffer during workspace allocation.
The data compressed with larger input buffers will still conform to zlib
standard and thus can be decompressed also on a systems that uses only
PAGE_SIZE buffer for btrfs zlib.
Link: http://lkml.kernel.org/r/20200108105103.29028-1-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikhail Zaslonko [Fri, 31 Jan 2020 06:16:30 +0000 (22:16 -0800)]
lib/zlib: add zlib_deflate_dfltcc_enabled() function
Add a new function to zlib.h checking if s390 Deflate-Conversion
facility is installed and enabled.
Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikhail Zaslonko [Fri, 31 Jan 2020 06:16:27 +0000 (22:16 -0800)]
s390/boot: add dfltcc= kernel command line parameter
Add the new kernel command line parameter 'dfltcc=' to configure s390
zlib hardware support.
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikhail Zaslonko [Fri, 31 Jan 2020 06:16:23 +0000 (22:16 -0800)]
lib/zlib: add s390 hardware support for kernel zlib_inflate
Add decompression functions to zlib_dfltcc library. Update zlib_inflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware inflate
decompression.
Link: http://lkml.kernel.org/r/20200103223334.20669-4-zaslonko@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikhail Zaslonko [Fri, 31 Jan 2020 06:16:20 +0000 (22:16 -0800)]
s390/boot: rename HEAP_SIZE due to name collision
Change the conflicting macro name in preparation for zlib_inflate
hardware support.
Link: http://lkml.kernel.org/r/20200103223334.20669-3-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mikhail Zaslonko [Fri, 31 Jan 2020 06:16:17 +0000 (22:16 -0800)]
lib/zlib: add s390 hardware support for kernel zlib_deflate
Patch series "S390 hardware support for kernel zlib", v3.
With IBM z15 mainframe the new DFLTCC instruction is available. It
implements deflate algorithm in hardware (Nest Acceleration Unit - NXU)
with estimated compression and decompression performance orders of
magnitude faster than the current zlib.
This patchset adds s390 hardware compression support to kernel zlib.
The code is based on the userspace zlib implementation:
https://github.com/madler/zlib/pull/410
The coding style is also preserved for future maintainability. There is
only limited set of userspace zlib functions represented in kernel.
Apart from that, all the memory allocation should be performed in
advance. Thus, the workarea structures are extended with the parameter
lists required for the DEFLATE CONVENTION CALL instruction.
Since kernel zlib itself does not support gzip headers, only Adler-32
checksum is processed (also can be produced by DFLTCC facility). Like
it was implemented for userspace, kernel zlib will compress in hardware
on level 1, and in software on all other levels. Decompression will
always happen in hardware (when enabled).
Two DFLTCC compression calls produce the same results only when they
both are made on machines of the same generation, and when the
respective buffers have the same offset relative to the start of the
page. Therefore care should be taken when using hardware compression
when reproducible results are desired. However it does always produce
the standard conform output which can be inflated anyway.
The new kernel command line parameter 'dfltcc' is introduced to
configure s390 zlib hardware support:
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
The main purpose of the integration of the NXU support into the kernel
zlib is the use of hardware deflate in btrfs filesystem with on-the-fly
compression enabled. Apart from that, hardware support can also be used
during boot for decompressing the kernel or the ramdisk image
With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch
6) the following performance results have been achieved using the
ramdisk with btrfs. These are relative numbers based on throughput rate
and compression ratio for zlib level 1:
Input data Deflate rate Inflate rate Compression ratio
NXU/Software NXU/Software NXU/Software
stream of zeroes 1.46 1.02 1.00
random ASCII data 10.44 3.00 0.96
ASCII text (dickens) 6,21 3.33 0.94
binary data (vmlinux) 8,37 3.90 1.02
This means that s390 hardware deflate can provide up to 10 times faster
compression (on level 1) and up to 4 times faster decompression (refers
to all compression levels) for btrfs zlib.
Disclaimer: Performance results are based on IBM internal tests using DD
command-line utility on btrfs on a Fedora 30 based internal driver in
native LPAR on a z15 system. Results may vary based on individual
workload, configuration and software levels.
This patch (of 9):
Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL
implementation and related compression functions. Update zlib_deflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware deflate.
Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:16:13 +0000 (22:16 -0800)]
iio: adc: qcom-vadc-common: use <linux/units.h> helpers
This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius()
in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-13-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:16:09 +0000 (22:16 -0800)]
thermal: armada: remove unused TO_MCELSIUS macro
This removes unused TO_MCELSIUS() macro.
Link: http://lkml.kernel.org/r/1576386975-7941-12-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:16:05 +0000 (22:16 -0800)]
iwlwifi: use <linux/units.h> helpers
This switches the iwlwifi driver to use celsius_to_kelvin() and
kelvin_to_celsius() in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-11-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:16:01 +0000 (22:16 -0800)]
iwlegacy: use <linux/units.h> helpers
This switches the iwlegacy driver to use celsius_to_kelvin() and
kelvin_to_celsius() in <linux/units.h>.
[akinobu.mita@gmail.com: fix build warnings with format string]
Link: http://lkml.kernel.org/r/1579014483-9226-1-git-send-email-akinobu.mita@gmail.com
Link: https://lore.kernel.org/r/20200106171452.201c3b4c@canb.auug.org.au
Link: http://lkml.kernel.org/r/1576386975-7941-10-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:57 +0000 (22:15 -0800)]
thermal: remove kelvin to/from Celsius conversion helpers from <linux/thermal.h>
This removes the kelvin to/from Celsius conversion helper macros in
<linux/thermal.h> which were switched to the inline helper functions in
<linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-9-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:53 +0000 (22:15 -0800)]
nvme: hwmon: switch to use <linux/units.h> helpers
This switches the nvme driver to use kelvin_to_millicelsius() and
millicelsius_to_kelvin() in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-8-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:48 +0000 (22:15 -0800)]
thermal: intel_pch: switch to use <linux/units.h> helpers
This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:44 +0000 (22:15 -0800)]
thermal: int340x: switch to use <linux/units.h> helpers
This switches the int340x thermal zone driver to use
deci_kelvin_to_millicelsius() and millicelsius_to_deci_kelvin() in
<linux/units.h> instead of helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-6-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:40 +0000 (22:15 -0800)]
platform/x86: intel_menlow: switch to use <linux/units.h> helpers
This switches the intel_menlow driver to use deci_kelvin_to_celsius()
and celsius_to_deci_kelvin() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
This also removes a trailing space, while we're at it.
Link: http://lkml.kernel.org/r/1576386975-7941-5-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:37 +0000 (22:15 -0800)]
platform/x86: asus-wmi: switch to use <linux/units.h> helpers
The asus-wmi driver doesn't implement the thermal device functionality
directly, so including <linux/thermal.h> just for
DECI_KELVIN_TO_CELSIUS() is a bit odd.
This switches the asus-wmi driver to use deci_kelvin_to_millicelsius()
in <linux/units.h>.
The format string is changed from %d to %ld due to function returned
type.
Link: http://lkml.kernel.org/r/1576386975-7941-4-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:33 +0000 (22:15 -0800)]
ACPI: thermal: switch to use <linux/units.h> helpers
This switches the ACPI thermal zone driver to use
celsius_to_deci_kelvin(), deci_kelvin_to_celsius(), and
deci_kelvin_to_millicelsius_with_offset() in <linux/units.h> instead of
helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-3-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Akinobu Mita [Fri, 31 Jan 2020 06:15:28 +0000 (22:15 -0800)]
include/linux/units.h: add helpers for kelvin to/from Celsius conversion
Patch series "add header file for kelvin to/from Celsius conversion
helpers", v4.
There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers. These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just
for the helpers.
This adds a new <linux/units.h> that provides the equivalent inline
functions for any drivers or subsystems, and switches all the users of
conversion helpers in <linux/thermal.h> to use <linux/units.h> helpers.
This patch (of 12):
There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers. These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just
for the helpers.
This adds a new <linux/units.h> that provides the equivalent inline
functions for any drivers or subsystems. It is intended to replace the
helpers in <linux/thermal.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-2-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 31 Jan 2020 06:15:25 +0000 (22:15 -0800)]
drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store
Currently when an error code -EIO or -ENOSPC in the for-loop of
writeback_store the error code is being overwritten by a ret = len
assignment at the end of the function and the error codes are being
lost. Fix this by assigning ret = len at the start of the function and
remove the assignment from the end, hence allowing ret to be preserved
when error codes are assigned to it.
Addresses Coverity ("Unused value")
Link: http://lkml.kernel.org/r/20191128122958.178290-1-colin.king@canonical.com
Fixes: a939888ec38b ("zram: support idle/huge page writeback")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Taejoon Song [Fri, 31 Jan 2020 06:15:22 +0000 (22:15 -0800)]
zram: try to avoid worst-case scenario on same element pages
The worst-case scenario on finding same element pages is that almost all
elements are same at the first glance but only last few elements are
different.
Since the same element tends to be grouped from the beginning of the
pages, if we check the first element with the last element before
looping through all elements, we might have some chances to quickly
detect non-same element pages.
1. Test is done under LG webOS TV (64-bit arch)
2. Dump the swap-out pages (~819200 pages)
3. Analyze the pages with simple test script which counts the iteration
number and measures the speed at off-line
Under 64-bit arch, the worst iteration count is PAGE_SIZE / 8 bytes =
512. The speed is based on the time to consume page_same_filled()
function only. The result, on average, is listed as below:
Num of Iter Speed(MB/s)
Looping-Forward (Orig) 38 99265
Looping-Backward 36 102725
Last-element-check (This Patch) 33 125072
The result shows that the average iteration count decreases by 13% and
the speed increases by 25% with this patch. This patch does not
increase the overall time complexity, though.
I also ran simpler version which uses backward loop. Just looping
backward also makes some improvement, but less than this patch.
[taejoon.song@lge.com: fix off-by-one]
Link: http://lkml.kernel.org/r/1578642001-11765-1-git-send-email-taejoon.song@lge.com
Link: http://lkml.kernel.org/r/1575424418-16119-1-git-send-email-taejoon.song@lge.com
Signed-off-by: Taejoon Song <taejoon.song@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hao Lee [Fri, 31 Jan 2020 06:15:19 +0000 (22:15 -0800)]
mm: fix comments related to node reclaim
As zone reclaim has been replaced by node reclaim, this patch fixes
related comments.
Link: http://lkml.kernel.org/r/20191126141346.GA22665@haolee.github.io
Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 31 Jan 2020 06:15:16 +0000 (22:15 -0800)]
include/linux/memory.h: drop fields 'hw' and 'phys_callback' from struct memory_block
memory_block structure elements 'hw' and 'phys_callback' are not getting
used. This was originally added with commit
3947be1969a9 ("[PATCH]
memory hotplug: sysfs and add/remove functions") but never seem to have
been used. Just drop them now.
Link: http://lkml.kernel.org/r/1576728650-13867-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Fri, 31 Jan 2020 06:15:13 +0000 (22:15 -0800)]
include/linux/mm.h: remove dead code totalram_pages_set()
totalram_pages_set() was introduced in commit
ca79b0c211af ("mm: convert
totalram_pages and totalhigh_pages variables to atomic"), but no one
uses it.
Link: http://lkml.kernel.org/r/20191218005543.24146-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yu Zhao [Fri, 31 Jan 2020 06:15:10 +0000 (22:15 -0800)]
include/linux/mm.h: clean up obsolete check on space in page->flags
The check was intended to make sure we don't overrun page flags. But
it's obsolete because it doesn't include LAST_CPUPID_WIDTH nor
KASAN_TAG_WIDTH.
Just remove check since we already have it covered in
linux/page-flags-layout.h (near the end of the file).
Link: http://lkml.kernel.org/r/20191208183508.89177-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Carpenter [Fri, 31 Jan 2020 06:15:07 +0000 (22:15 -0800)]
zswap: potential NULL dereference on error in init_zswap()
The "pool" pointer can be NULL at the end of the init_zswap(). (We
would allocate a new pool later in that situation)
So in the error handling then we need to make sure pool is a valid
pointer before calling "zswap_pool_destroy(pool);" because that function
dereferences the argument.
Link: http://lkml.kernel.org/r/20200114050902.og32fkllkod5ycf5@kili.mountain
Fixes: 93d4dfa9fbd0 ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vitaly Wool [Fri, 31 Jan 2020 06:15:04 +0000 (22:15 -0800)]
mm/zswap.c: add allocation hysteresis if pool limit is hit
zswap will always try to shrink pool when zswap is full. If there is a
high pressure on zswap it will result in flipping pages in and out zswap
pool without any real benefit, and the overall system performance will
drop. The previous discussion on this subject [1] ended up with a
suggestion to implement a sort of hysteresis to refuse taking pages into
zswap pool until it has sufficient space if the limit has been hit.
This is my take on this.
Hysteresis is controlled with a sysfs-configurable parameter (namely,
/sys/kernel/debug/zswap/accept_threhsold_percent). It specifies the
threshold at which zswap would start accepting pages again after it
became full. Setting this parameter to 100 disables the hysteresis and
sets the zswap behavior to pre-hysteresis state.
[1] https://lkml.org/lkml/2019/11/8/949
Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 31 Jan 2020 06:15:01 +0000 (22:15 -0800)]
mm/page_isolation: fix potential warning from user
It makes sense to call the WARN_ON_ONCE(zone_idx(zone) == ZONE_MOVABLE)
from start_isolate_page_range(), but should avoid triggering it from
userspace, i.e, from is_mem_section_removable() because it could crash
the system by a non-root user if warn_on_panic is set.
While at it, simplify the code a bit by removing an unnecessary jump
label.
Link: http://lkml.kernel.org/r/20200120163915.1469-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Fri, 31 Jan 2020 06:14:57 +0000 (22:14 -0800)]
mm/hotplug: silence a lockdep splat with printk()
It is not that hard to trigger lockdep splats by calling printk from
under zone->lock. Most of them are false positives caused by lock
chains introduced early in the boot process and they do not cause any
real problems (although most of the early boot lock dependencies could
happen after boot as well). There are some console drivers which do
allocate from the printk context as well and those should be fixed. In
any case, false positives are not that trivial to workaround and it is
far from optimal to lose lockdep functionality for something that is a
non-issue.
So change has_unmovable_pages() so that it no longer calls dump_page()
itself - instead it returns a "struct page *" of the unmovable page back
to the caller so that in the case of a has_unmovable_pages() failure,
the caller can call dump_page() after releasing zone->lock. Also, make
dump_page() is able to report a CMA page as well, so the reason string
from has_unmovable_pages() can be removed.
Even though has_unmovable_pages doesn't hold any reference to the
returned page this should be reasonably safe for the purpose of
reporting the page (dump_page) because it cannot be hotremoved in the
context of memory unplug. The state of the page might change but that
is the case even with the existing code as zone->lock only plays role
for free pages.
While at it, remove a similar but unnecessary debug-only printk() as
well. A sample of one of those lockdep splats is,
WARNING: possible circular locking dependency detected
------------------------------------------------------
test.sh/8653 is trying to acquire lock:
ffffffff865a4460 (console_owner){-.-.}, at:
console_unlock+0x207/0x750
but task is already holding lock:
ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
__offline_isolated_pages+0x179/0x3e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&(&zone->lock)->rlock){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock+0x2f/0x40
rmqueue_bulk.constprop.21+0xb6/0x1160
get_page_from_freelist+0x898/0x22c0
__alloc_pages_nodemask+0x2f3/0x1cd0
alloc_pages_current+0x9c/0x110
allocate_slab+0x4c6/0x19c0
new_slab+0x46/0x70
___slab_alloc+0x58b/0x960
__slab_alloc+0x43/0x70
__kmalloc+0x3ad/0x4b0
__tty_buffer_request_room+0x100/0x250
tty_insert_flip_string_fixed_flag+0x67/0x110
pty_write+0xa2/0xf0
n_tty_write+0x36b/0x7b0
tty_write+0x284/0x4c0
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
redirected_tty_write+0x6a/0xc0
do_iter_write+0x248/0x2a0
vfs_writev+0x106/0x1e0
do_writev+0xd4/0x180
__x64_sys_writev+0x45/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #2 (&(&port->lock)->rlock){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock_irqsave+0x3a/0x50
tty_port_tty_get+0x20/0x60
tty_port_default_wakeup+0xf/0x30
tty_port_tty_wakeup+0x39/0x40
uart_write_wakeup+0x2a/0x40
serial8250_tx_chars+0x22e/0x440
serial8250_handle_irq.part.8+0x14a/0x170
serial8250_default_handle_irq+0x5c/0x90
serial8250_interrupt+0xa6/0x130
__handle_irq_event_percpu+0x78/0x4f0
handle_irq_event_percpu+0x70/0x100
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x117/0x370
do_IRQ+0x9e/0x1e0
ret_from_intr+0x0/0x2a
cpuidle_enter_state+0x156/0x8e0
cpuidle_enter+0x41/0x70
call_cpuidle+0x5e/0x90
do_idle+0x333/0x370
cpu_startup_entry+0x1d/0x1f
start_secondary+0x290/0x330
secondary_startup_64+0xb6/0xc0
-> #1 (&port_lock_key){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock_irqsave+0x3a/0x50
serial8250_console_write+0x3e4/0x450
univ8250_console_write+0x4b/0x60
console_unlock+0x501/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
-> #0 (console_owner){-.-.}:
check_prev_add+0x107/0xea0
validate_chain+0x8fc/0x1200
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
console_unlock+0x269/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
__offline_isolated_pages.cold.52+0x2f/0x30a
offline_isolated_pages_cb+0x17/0x30
walk_system_ram_range+0xda/0x160
__offline_pages+0x79c/0xa10
offline_pages+0x11/0x20
memory_subsys_offline+0x7e/0xc0
device_offline+0xd5/0x110
state_store+0xc6/0xe0
dev_attr_store+0x3f/0x60
sysfs_kf_write+0x89/0xb0
kernfs_fop_write+0x188/0x240
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
ksys_write+0xc6/0x160
__x64_sys_write+0x43/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&zone->lock)->rlock);
lock(&(&port->lock)->rlock);
lock(&(&zone->lock)->rlock);
lock(console_owner);
*** DEADLOCK ***
9 locks held by test.sh/8653:
#0:
ffff88839ba7d408 (sb_writers#4){.+.+}, at:
vfs_write+0x25f/0x290
#1:
ffff888277618880 (&of->mutex){+.+.}, at:
kernfs_fop_write+0x128/0x240
#2:
ffff8898131fc218 (kn->count#115){.+.+}, at:
kernfs_fop_write+0x138/0x240
#3:
ffffffff86962a80 (device_hotplug_lock){+.+.}, at:
lock_device_hotplug_sysfs+0x16/0x50
#4:
ffff8884374f4990 (&dev->mutex){....}, at:
device_offline+0x70/0x110
#5:
ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at:
__offline_pages+0xbf/0xa10
#6:
ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at:
percpu_down_write+0x87/0x2f0
#7:
ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
__offline_isolated_pages+0x179/0x3e0
#8:
ffffffff865a4920 (console_lock){+.+.}, at:
vprintk_emit+0x100/0x340
stack backtrace:
Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10,
BIOS U34 05/21/2019
Call Trace:
dump_stack+0x86/0xca
print_circular_bug.cold.31+0x243/0x26e
check_noncircular+0x29e/0x2e0
check_prev_add+0x107/0xea0
validate_chain+0x8fc/0x1200
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
console_unlock+0x269/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
__offline_isolated_pages.cold.52+0x2f/0x30a
offline_isolated_pages_cb+0x17/0x30
walk_system_ram_range+0xda/0x160
__offline_pages+0x79c/0xa10
offline_pages+0x11/0x20
memory_subsys_offline+0x7e/0xc0
device_offline+0xd5/0x110
state_store+0xc6/0xe0
dev_attr_store+0x3f/0x60
sysfs_kf_write+0x89/0xb0
kernfs_fop_write+0x188/0x240
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
ksys_write+0xc6/0x160
__x64_sys_write+0x43/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Fri, 31 Jan 2020 06:14:54 +0000 (22:14 -0800)]
mm/memory_hotplug: pass in nid to online_pages()
Patch series "mm/memory_hotplug: pass in nid to online_pages()".
Simplify onlining code and get rid of find_memory_block(). Pass in the
nid from the memory block we are trying to online directly, instead of
manually looking it up.
This patch (of 2):
No need to lookup the memory block, we can directly pass in the nid.
Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miaohe Lin [Fri, 31 Jan 2020 06:14:51 +0000 (22:14 -0800)]
mm/mmap.c: get rid of odd jump labels in find_mergeable_anon_vma()
The jump labels try_prev and none are not really needed in
find_mergeable_anon_vma(), eliminate them to improve readability.
Link: http://lkml.kernel.org/r/1574079844-17493-1-git-send-email-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 31 Jan 2020 06:14:48 +0000 (22:14 -0800)]
mm, thp: fix defrag setting if newline is not used
If thp defrag setting "defer" is used and a newline is *not* used when
writing to the sysfs file, this is interpreted as the "defer+madvise"
option.
This is because we do prefix matching and if five characters are written
without a newline, the current code ends up comparing to the first five
bytes of the "defer+madvise" option and using that instead.
Use the more appropriate sysfs_streq() that handles the trailing newline
for us. Since this doubles as a nice cleanup, do it in enabled_store()
as well.
The current implementation relies on prefix matching: the number of
bytes compared is either the number of bytes written or the length of
the option being compared. With a newline, "defer\n" does not match
"defer+"madvise"; without a newline, however, "defer" is considered to
match "defer+madvise" (prefix matching is only comparing the first five
bytes). End result is that writing "defer" is broken unless it has an
additional trailing character.
This means that writing "madv" in the past would match and set
"madvise". With strict checking, that no longer is the case but it is
unlikely anybody is currently doing this.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001171411020.56385@chino.kir.corp.google.com
Fixes: 21440d7eb904 ("mm, thp: add new defer+madvise defrag option")
Signed-off-by: David Rientjes <rientjes@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Fri, 31 Jan 2020 06:14:44 +0000 (22:14 -0800)]
mm/migrate: add stable check in migrate_vma_insert_page()
migrate_vma_insert_page() closely follows the code in:
__handle_mm_fault()
handle_pte_fault()
do_anonymous_page()
Add a call to check_stable_address_space() after locking the page table
entry before inserting a ZONE_DEVICE private zero page mapping similar
to page faulting a new anonymous page.
Link: http://lkml.kernel.org/r/20200107211208.24595-4-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Fri, 31 Jan 2020 06:14:41 +0000 (22:14 -0800)]
mm/migrate: clean up some minor coding style
Fix some comment typos and coding style clean up in preparation for the
next patch. No functional changes.
Link: http://lkml.kernel.org/r/20200107211208.24595-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Fri, 31 Jan 2020 06:14:38 +0000 (22:14 -0800)]
mm/migrate: remove useless mask of start address
Addresses passed to walk_page_range() callback functions are already
page aligned and don't need to be masked with PAGE_MASK.
Link: http://lkml.kernel.org/r/20200107211208.24595-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Fri, 31 Jan 2020 06:14:35 +0000 (22:14 -0800)]
mm/huge_memory.c: reduce critical section protected by split_queue_lock
split_queue_lock protects data in struct deferred_split. We can release
the lock after delete the page from deferred_split_queue.
This patch moves the THP accounting out of the lock protection, which is
introduced in commit
65c453778aea ("mm, rmap: account shmem thp pages").
Link: http://lkml.kernel.org/r/20200110025516.23996-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Fri, 31 Jan 2020 06:14:32 +0000 (22:14 -0800)]
mm/huge_memory.c: use head to emphasize the purpose of page
During split huge page, it checks the property of the page. Currently
we do the check on page and head without emphasizing the check is on the
compound page. In case the page passed to split_huge_page_to_list is a
tail page, audience would take some time to think about whether the
check is on compound page or tail page itself.
To make it explicit, use head instead of page for those checks. After
this, audience would be more clear about the checks are on compound page
and the page is used to do the split and dump error message if failed.
Link: http://lkml.kernel.org/r/20200110032610.26499-2-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Fri, 31 Jan 2020 06:14:29 +0000 (22:14 -0800)]
mm/huge_memory.c: use head to check huge zero page
The page could be a tail page, if this is the case, this BUG_ON will
never be triggered.
Link: http://lkml.kernel.org/r/20200110032610.26499-1-richardw.yang@linux.intel.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Fri, 31 Jan 2020 06:14:26 +0000 (22:14 -0800)]
mm, oom: dump stack of victim when reaping failed
When a process cannot be oom reaped, for whatever reason, currently the
list of locks that are held is currently dumped to the kernel log.
Much more interesting is the stack trace of the victim that cannot be
reaped. If the stack trace is dumped, we have the ability to find
related occurrences in the same kernel code and hopefully solve the
issue that is making it wedged.
Dump the stack trace when a process fails to be oom reaped.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001141519280.200484@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 31 Jan 2020 06:14:23 +0000 (22:14 -0800)]
memblock: Use __func__ in remaining memblock_dbg() call sites
Replace open function name strings with %s (__func__) in all remaining
memblock_dbg() call sites.
Link: http://lkml.kernel.org/r/1578285510-28261-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anshuman Khandual [Fri, 31 Jan 2020 06:14:20 +0000 (22:14 -0800)]
mm/memblock: define memblock_physmem_add()
On the s390 platform memblock.physmem array is being built by directly
calling into memblock_add_range() which is a low level function not
intended to be used outside of memblock. Hence lets conditionally add
helper functions for physmem array when HAVE_MEMBLOCK_PHYS_MAP is
enabled. Also use MAX_NUMNODES instead of 0 as node ID similar to
memblock_add() and memblock_reserve(). Make memblock_add_range() a
static function as it is no longer getting used outside of memblock.
Link: http://lkml.kernel.org/r/1578283835-21969-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Collin Walling <walling@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Wagner [Fri, 31 Jan 2020 06:14:17 +0000 (22:14 -0800)]
tools/vm/slabinfo: fix sanity checks enabling
The sysfs file name for enabling sanity checking is called
'sanity_checks' and not 'sanity'.
The name of the file has never changed since the introduction of the
slub allocator. Obviously, most people turn the checks on via the
command line option and not during runtime using slabinfo.
Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Shi [Fri, 31 Jan 2020 06:14:14 +0000 (22:14 -0800)]
mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE
Commit
1b2ffb7896ad ("[PATCH] Zone reclaim: Allow modification of zone
reclaim behavior")' defined RECLAIM_OFF/RECLAIM_ZONE, but never use
them, so better to remove them.
[dwagner@suse.de: fix sanity checks enabling]
Link: http://lkml.kernel.org/r/20200116131642.642-1-dwagner@suse.de
[akpm@linux-foundation.org: renumber the bits for neatness]
Link: http://lkml.kernel.org/r/1579005573-58923-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alex Shi [Fri, 31 Jan 2020 06:14:10 +0000 (22:14 -0800)]
mm/vmscan: remove prefetch_prev_lru_page
This macro was never used in git history. So better to remove.
Link: http://lkml.kernel.org/r/1579006500-127143-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liu Song [Fri, 31 Jan 2020 06:14:08 +0000 (22:14 -0800)]
mm/vmscan.c: remove unused return value of shrink_node
The return value of shrink_node is not used, so remove unnecessary
operations.
Link: http://lkml.kernel.org/r/20191128143524.3223-1-fishland@aliyun.com
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Fri, 31 Jan 2020 06:14:04 +0000 (22:14 -0800)]
mm: remove "count" parameter from has_unmovable_pages()
Now that the memory isolate notifier is gone, the parameter is always 0.
Drop it and cleanup has_unmovable_pages().
Link: http://lkml.kernel.org/r/20191114131911.11783-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Fri, 31 Jan 2020 06:14:01 +0000 (22:14 -0800)]
mm: remove the memory isolate notifier
Luckily, we have no users left, so we can get rid of it. Cleanup
set_migratetype_isolate() a little bit.
Link: http://lkml.kernel.org/r/20191114131911.11783-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qian Cai <cai@lca.pw>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Fri, 31 Jan 2020 06:13:57 +0000 (22:13 -0800)]
mm/page_alloc: skip non present sections on zone initialization
memmap_init_zone() can be called on the ranges with holes during the
boot. It will skip any non-valid PFNs one-by-one. It works fine as
long as holes are not too big.
But huge holes in the memory map causes a problem. It takes over 20
seconds to walk 32TiB hole. x86-64 with 5-level paging allows for much
larger holes in the memory map which would practically hang the system.
Deferred struct page init doesn't help here. It only works on the
present ranges.
Skipping non-present sections would fix the issue.
Link: http://lkml.kernel.org/r/20191230093828.24613-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Fri, 31 Jan 2020 06:13:54 +0000 (22:13 -0800)]
mm/early_ioremap.c: use %pa to print resource_size_t variables
%pa takes into consideration the special types such as resource_size_t.
Use this specifier %instead of explicit casting.
Link: http://lkml.kernel.org/r/20191209165413.56263-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gustavo A. R. Silva [Fri, 31 Jan 2020 06:13:51 +0000 (22:13 -0800)]
lib/test_kasan.c: fix memory leak in kmalloc_oob_krealloc_more()
In case memory resources for _ptr2_ were allocated, release them before
return.
Notice that in case _ptr1_ happens to be NULL, krealloc() behaves
exactly like kmalloc().
Addresses-Coverity-ID:
1490594 ("Resource leak")
Link: http://lkml.kernel.org/r/20200123160115.GA4202@embeddedor
Fixes: 3f15801cdc23 ("lib: add kasan test module")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junyong Sun [Fri, 31 Jan 2020 06:13:48 +0000 (22:13 -0800)]
mm, tracing: print symbol name for kmem_alloc_node call_site events
Print the call_site ip of kmem_alloc_node using '%pS' to improve the
readability of raw slab trace points.
Link: http://lkml.kernel.org/r/1577949568-4518-1-git-send-email-sunjunyong@xiaomi.com
Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Xinhai [Fri, 31 Jan 2020 06:13:45 +0000 (22:13 -0800)]
mm/page_vma_mapped.c: explicitly compare pfn for normal, hugetlbfs and THP page
When check_pte, pfn of normal, hugetlbfs and THP page need be compared.
The current implementation apply comparison as
- normal 4K page: page_pfn <= pfn < page_pfn + 1
- hugetlbfs page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR
- THP page: page_pfn <= pfn < page_pfn + HPAGE_PMD_NR
in pfn_in_hpage. For hugetlbfs page, it should be page_pfn == pfn
Now, change pfn_in_hpage to pfn_is_match to highlight that comparison is
not only for THP and explicitly compare for these cases.
No impact upon current behavior, just make the code clear. I think it
is important to make the code clear - comparing hugetlbfs page in range
page_pfn <= pfn < page_pfn + HPAGE_PMD_NR is confusing.
Link: http://lkml.kernel.org/r/1578737885-8890-1-git-send-email-lixinhai.lxh@gmail.com
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kaitao Cheng [Fri, 31 Jan 2020 06:13:42 +0000 (22:13 -0800)]
mm/memcontrol.c: cleanup some useless code
Compound pages handling in mem_cgroup_migrate is more convoluted than
necessary. The state is duplicated in compound variable and the same
could be achieved by PageTransHuge check which is trivial and
hpage_nr_pages is already PageTransHuge aware.
It is much simpler to just use hpage_nr_pages for nr_pages and replace
the local variable by PageTransHuge check directly
Link: http://lkml.kernel.org/r/20191210160450.3395-1-pilgrimtao@gmail.com
Signed-off-by: Kaitao Cheng <pilgrimtao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vasily Averin [Fri, 31 Jan 2020 06:13:39 +0000 (22:13 -0800)]
mm/swapfile.c: swap_next should increase position index
If seq_file .next fuction does not change position index, read after
some lseek can generate unexpected output.
In Aug 2018 NeilBrown noticed commit
1f4aace60b0e ("fs/seq_file.c:
simplify seq_file iteration code and interface") "Some ->next functions
do not increment *pos when they return NULL... Note that such ->next
functions are buggy and should be fixed. A simple demonstration is
dd if=/proc/swaps bs=1000 skip=1
Choose any block size larger than the size of /proc/swaps. This will
always show the whole last line of /proc/swaps"
Described problem is still actual. If you make lseek into middle of
last output line following read will output end of last line and whole
last line once again.
$ dd if=/proc/swaps bs=1 # usual output
Filename Type Size Used Priority
/dev/dm-0 partition
4194812 97536 -2
104+0 records in
104+0 records out
104 bytes copied
$ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice
dd: /proc/swaps: cannot skip to specified offset
v/dm-0 partition
4194812 97536 -2
/dev/dm-0 partition
4194812 97536 -2
3+1 records in
3+1 records out
131 bytes copied
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Link: http://lkml.kernel.org/r/bd8cfd7b-ac95-9b91-f9e7-e8438bd5047d@virtuozzo.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:35 +0000 (22:13 -0800)]
mm, tree-wide: rename put_user_page*() to unpin_user_page*()
In order to provide a clearer, more symmetric API for pinning and
unpinning DMA pages. This way, pin_user_pages*() calls match up with
unpin_user_pages*() calls, and the API is a lot closer to being
self-explanatory.
Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:32 +0000 (22:13 -0800)]
mm/gup_benchmark: use proper FOLL_WRITE flags instead of hard-coding "1"
Fix the gup benchmark flags to use the symbolic FOLL_WRITE, instead of a
hard-coded "1" value.
Also, clean up the filtering of gup flags a little, by just doing it
once before issuing any of the get_user_pages*() calls. This makes it
harder to overlook, instead of having little "gup_flags & 1" phrases in
the function calls.
Link: http://lkml.kernel.org/r/20200107224558.2362728-22-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:28 +0000 (22:13 -0800)]
powerpc: book3s64: convert to pin_user_pages() and put_user_page()
1. Convert from get_user_pages() to pin_user_pages().
2. As required by pin_user_pages(), release these pages via
put_user_page().
Link: http://lkml.kernel.org/r/20200107224558.2362728-21-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:24 +0000 (22:13 -0800)]
vfio, mm: pin_user_pages (FOLL_PIN) and put_user_page() conversion
1. Change vfio from get_user_pages_remote(), to
pin_user_pages_remote().
2. Because all FOLL_PIN-acquired pages must be released via
put_user_page(), also convert the put_page() call over to
put_user_pages_dirty_lock().
Note that this effectively changes the code's behavior in
vfio_iommu_type1.c: put_pfn(): it now ultimately calls
set_page_dirty_lock(), instead of set_page_dirty(). This is probably
more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
[1] https://lore.kernel.org/r/
20190723153640.GB720@lst.de
Link: http://lkml.kernel.org/r/20200107224558.2362728-20-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:20 +0000 (22:13 -0800)]
media/v4l2-core: pin_user_pages (FOLL_PIN) and put_user_page() conversion
1. Change v4l2 from get_user_pages() to pin_user_pages().
2. Because all FOLL_PIN-acquired pages must be released via
put_user_page(), also convert the put_page() call over to
put_user_pages_dirty_lock().
Link: http://lkml.kernel.org/r/20200107224558.2362728-19-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:17 +0000 (22:13 -0800)]
net/xdp: set FOLL_PIN via pin_user_pages()
Convert net/xdp to use the new pin_longterm_pages() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages.
In partial anticipation of this work, the net/xdp code was already calling
put_user_page() instead of put_page(). Therefore, in order to convert
from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required here is
to change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-18-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:13 +0000 (22:13 -0800)]
fs/io_uring: set FOLL_PIN via pin_user_pages()
Convert fs/io_uring to use the new pin_user_pages() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages, and therefore for any code that calls
put_user_page().
In partial anticipation of this work, the io_uring code was already
calling put_user_page() instead of put_page(). Therefore, in order to
convert from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required here is
to change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-17-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:09 +0000 (22:13 -0800)]
drm/via: set FOLL_PIN via pin_user_pages_fast()
Convert drm/via to use the new pin_user_pages_fast() call, which sets
FOLL_PIN. Setting FOLL_PIN is now required for code that requires
tracking of pinned pages, and therefore for any code that calls
put_user_page().
In partial anticipation of this work, the drm/via driver was already
calling put_user_page() instead of put_page(). Therefore, in order to
convert from the get_user_pages()/put_page() model, to the
pin_user_pages()/put_user_page() model, the only change required is to
change get_user_pages() to pin_user_pages().
Link: http://lkml.kernel.org/r/20200107224558.2362728-16-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:05 +0000 (22:13 -0800)]
mm/process_vm_access: set FOLL_PIN via pin_user_pages_remote()
Convert process_vm_access to use the new pin_user_pages_remote() call,
which sets FOLL_PIN. Setting FOLL_PIN is now required for code that
requires tracking of pinned pages.
Also, release the pages via put_user_page*().
Also, rename "pages" to "pinned_pages", as this makes for easier reading
of process_vm_rw_single_vec().
Link: http://lkml.kernel.org/r/20200107224558.2362728-15-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:13:02 +0000 (22:13 -0800)]
IB/{core,hw,umem}: set FOLL_PIN via pin_user_pages*(), fix up ODP
Convert infiniband to use the new pin_user_pages*() calls.
Also, revert earlier changes to Infiniband ODP that had it using
put_user_page(). ODP is "Case 3" in
Documentation/core-api/pin_user_pages.rst, which is to say, normal
get_user_pages() and put_page() is the API to use there.
The new pin_user_pages*() calls replace corresponding get_user_pages*()
calls, and set the FOLL_PIN flag. The FOLL_PIN flag requires that the
caller must return the pages via put_user_page*() calls, but infiniband
was already doing that as part of an earlier commit.
Link: http://lkml.kernel.org/r/20200107224558.2362728-14-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:58 +0000 (22:12 -0800)]
goldish_pipe: convert to pin_user_pages() and put_user_page()
1. Call the new global pin_user_pages_fast(), from
pin_goldfish_pages().
2. As required by pin_user_pages(), release these pages via
put_user_page(). In this case, do so via put_user_pages_dirty_lock().
That has the side effect of calling set_page_dirty_lock(), instead of
set_page_dirty(). This is probably more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [1]
Another side effect is that the release code is simplified because the
page[] loop is now in gup.c instead of here, so just delete the local
release_user_pages() entirely, and call put_user_pages_dirty_lock()
directly, instead.
[1] https://lore.kernel.org/r/
20190723153640.GB720@lst.de
Link: http://lkml.kernel.org/r/20200107224558.2362728-13-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:54 +0000 (22:12 -0800)]
mm/gup: introduce pin_user_pages*() and FOLL_PIN
Introduce pin_user_pages*() variations of get_user_pages*() calls, and
also pin_longterm_pages*() variations.
For now, these are placeholder calls, until the various call sites are
converted to use the correct get_user_pages*() or pin_user_pages*() API.
These variants will eventually all set FOLL_PIN, which is also
introduced, and thoroughly documented.
pin_user_pages()
pin_user_pages_remote()
pin_user_pages_fast()
All pages that are pinned via the above calls, must be unpinned via
put_user_page().
The underlying rules are:
* FOLL_PIN is a gup-internal flag, so the call sites should not directly
set it. That behavior is enforced with assertions.
* Call sites that want to indicate that they are going to do DirectIO
("DIO") or something with similar characteristics, should call a
get_user_pages()-like wrapper call that sets FOLL_PIN. These wrappers
will:
* Start with "pin_user_pages" instead of "get_user_pages". That
makes it easy to find and audit the call sites.
* Set FOLL_PIN
* For pages that are received via FOLL_PIN, those pages must be returned
via put_user_page().
Thanks to Jan Kara and Vlastimil Babka for explaining the 4 cases in
this documentation. (I've reworded it and expanded upon it.)
Link: http://lkml.kernel.org/r/20200107224558.2362728-12-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> [Documentation]
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:50 +0000 (22:12 -0800)]
media/v4l2-core: set pages dirty upon releasing DMA buffers
After DMA is complete, and the device and CPU caches are synchronized,
it's still required to mark the CPU pages as dirty, if the data was
coming from the device. However, this driver was just issuing a bare
put_page() call, without any set_page_dirty*() call.
Fix the problem, by calling set_page_dirty_lock() if the CPU pages were
potentially receiving data from the device.
Link: http://lkml.kernel.org/r/20200107224558.2362728-11-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:47 +0000 (22:12 -0800)]
IB/umem: use get_user_pages_fast() to pin DMA pages
And get rid of the mmap_sem calls, as part of that. Note that
get_user_pages_fast() will, if necessary, fall back to
__gup_longterm_unlocked(), which takes the mmap_sem as needed.
Link: http://lkml.kernel.org/r/20200107224558.2362728-10-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:43 +0000 (22:12 -0800)]
mm/gup: allow FOLL_FORCE for get_user_pages_fast()
Commit
817be129e6f2 ("mm: validate get_user_pages_fast flags") allowed
only FOLL_WRITE and FOLL_LONGTERM to be passed to get_user_pages_fast().
This, combined with the fact that get_user_pages_fast() falls back to
"slow gup", which *does* accept FOLL_FORCE, leads to an odd situation:
if you need FOLL_FORCE, you cannot call get_user_pages_fast().
There does not appear to be any reason for filtering out FOLL_FORCE.
There is nothing in the _fast() implementation that requires that we
avoid writing to the pages. So it appears to have been an oversight.
Fix by allowing FOLL_FORCE to be set for get_user_pages_fast().
Link: http://lkml.kernel.org/r/20200107224558.2362728-9-jhubbard@nvidia.com
Fixes: 817be129e6f2 ("mm: validate get_user_pages_fast flags")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:39 +0000 (22:12 -0800)]
vfio: fix FOLL_LONGTERM use, simplify get_user_pages_remote() call
Update VFIO to take advantage of the recently loosened restriction on
FOLL_LONGTERM with get_user_pages_remote(). Also, now it is possible to
fix a bug: the VFIO caller is logically a FOLL_LONGTERM user, but it
wasn't setting FOLL_LONGTERM.
Also, remove an unnessary pair of calls that were releasing and
reacquiring the mmap_sem. There is no need to avoid holding mmap_sem
just in order to call page_to_pfn().
Also, now that the the DAX check ("if a VMA is DAX, don't allow long
term pinning") is in the internals of get_user_pages_remote() and
__gup_longterm_locked(), there's no need for it at the VFIO call site. So
remove it.
Link: http://lkml.kernel.org/r/20200107224558.2362728-8-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:36 +0000 (22:12 -0800)]
mm: fix get_user_pages_remote()'s handling of FOLL_LONGTERM
As it says in the updated comment in gup.c: current FOLL_LONGTERM
behavior is incompatible with FAULT_FLAG_ALLOW_RETRY because of the FS
DAX check requirement on vmas.
However, the corresponding restriction in get_user_pages_remote() was
slightly stricter than is actually required: it forbade all
FOLL_LONGTERM callers, but we can actually allow FOLL_LONGTERM callers
that do not set the "locked" arg.
Update the code and comments to loosen the restriction, allowing
FOLL_LONGTERM in some cases.
Also, copy the DAX check ("if a VMA is DAX, don't allow long term
pinning") from the VFIO call site, all the way into the internals of
get_user_pages_remote() and __gup_longterm_locked(). That is:
get_user_pages_remote() calls __gup_longterm_locked(), which in turn
calls check_dax_vmas(). This check will then be removed from the VFIO
call site in a subsequent patch.
Thanks to Jason Gunthorpe for pointing out a clean way to fix this, and
to Dan Williams for helping clarify the DAX refactoring.
Link: http://lkml.kernel.org/r/20200107224558.2362728-7-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:32 +0000 (22:12 -0800)]
goldish_pipe: rename local pin_user_pages() routine
Avoid naming conflicts: rename local static function from
"pin_user_pages()" to "goldfish_pin_pages()".
An upcoming patch will introduce a global pin_user_pages() function.
Link: http://lkml.kernel.org/r/20200107224558.2362728-6-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:28 +0000 (22:12 -0800)]
mm: devmap: refactor 1-based refcounting for ZONE_DEVICE pages
An upcoming patch changes and complicates the refcounting and especially
the "put page" aspects of it. In order to keep everything clean,
refactor the devmap page release routines:
* Rename put_devmap_managed_page() to page_is_devmap_managed(), and
limit the functionality to "read only": return a bool, with no side
effects.
* Add a new routine, put_devmap_managed_page(), to handle decrementing
the refcount for ZONE_DEVICE pages.
* Change callers (just release_pages() and put_page()) to check
page_is_devmap_managed() before calling the new
put_devmap_managed_page() routine. This is a performance point:
put_page() is a hot path, so we need to avoid non- inline function calls
where possible.
* Rename __put_devmap_managed_page() to free_devmap_managed_page(), and
limit the functionality to unconditionally freeing a devmap page.
This is originally based on a separate patch by Ira Weiny, which applied
to an early version of the put_user_page() experiments. Since then,
Jérôme Glisse suggested the refactoring described above.
Link: http://lkml.kernel.org/r/20200107224558.2362728-5-jhubbard@nvidia.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Suggested-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Fri, 31 Jan 2020 06:12:24 +0000 (22:12 -0800)]
mm: Cleanup __put_devmap_managed_page() vs ->page_free()
After the removal of the device-public infrastructure there are only 2
->page_free() call backs in the kernel. One of those is a
device-private callback in the nouveau driver, the other is a generic
wakeup needed in the DAX case. In the hopes that all ->page_free()
callbacks can be migrated to common core kernel functionality, move the
device-private specific actions in __put_devmap_managed_page() under the
is_device_private_page() conditional, including the ->page_free()
callback. For the other page types just open-code the generic wakeup.
Yes, the wakeup is only needed in the MEMORY_DEVICE_FSDAX case, but it
does no harm in the MEMORY_DEVICE_DEVDAX and MEMORY_DEVICE_PCI_P2PDMA
case.
Link: http://lkml.kernel.org/r/20200107224558.2362728-4-jhubbard@nvidia.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:21 +0000 (22:12 -0800)]
mm/gup: move try_get_compound_head() to top, fix minor issues
An upcoming patch uses try_get_compound_head() more widely, so move it to
the top of gup.c.
Also fix a tiny spelling error and a checkpatch.pl warning.
Link: http://lkml.kernel.org/r/20200107224558.2362728-3-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Hubbard [Fri, 31 Jan 2020 06:12:17 +0000 (22:12 -0800)]
mm/gup: factor out duplicate code from four routines
Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12.
Overview:
This is a prerequisite to solving the problem of proper interactions
between file-backed pages, and [R]DMA activities, as discussed in [1],
[2], [3], and in a remarkable number of email threads since about
2017. :)
A new internal gup flag, FOLL_PIN is introduced, and thoroughly
documented in the last patch's Documentation/vm/pin_user_pages.rst.
I believe that this will provide a good starting point for doing the
layout lease work that Ira Weiny has been working on. That's because
these new wrapper functions provide a clean, constrained, systematically
named set of functionality that, again, is required in order to even
know if a page is "dma-pinned".
In contrast to earlier approaches, the page tracking can be
incrementally applied to the kernel call sites that, until now, have
been simply calling get_user_pages() ("gup"). In other words, opt-in by
changing from this:
get_user_pages() (sets FOLL_GET)
put_page()
to this:
pin_user_pages() (sets FOLL_PIN)
unpin_user_page()
Testing:
* I've done some overall kernel testing (LTP, and a few other goodies),
and some directed testing to exercise some of the changes. And as you
can see, gup_benchmark is enhanced to exercise this. Basically, I've
been able to runtime test the core get_user_pages() and
pin_user_pages() and related routines, but not so much on several of
the call sites--but those are generally just a couple of lines
changed, each.
Not much of the kernel is actually using this, which on one hand
reduces risk quite a lot. But on the other hand, testing coverage
is low. So I'd love it if, in particular, the Infiniband and PowerPC
folks could do a smoke test of this series for me.
Runtime testing for the call sites so far is pretty light:
* io_uring: Some directed tests from liburing exercise this, and
they pass.
* process_vm_access.c: A small directed test passes.
* gup_benchmark: the enhanced version hits the new gup.c code, and
passes.
* infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py
* VFIO: compiles (I'm vowing to set up a run time test soon, but it's
not ready just yet)
* powerpc: it compiles...
* drm/via: compiles...
* goldfish: compiles...
* net/xdp: compiles...
* media/v4l2: compiles...
[1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/
[2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/
[3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/
This patch (of 22):
There are four locations in gup.c that have a fair amount of code
duplication. This means that changing one requires making the same
changes in four places, not to mention reading the same code four times,
and wondering if there are subtle differences.
Factor out the common code into static functions, thus reducing the
overall line count and the code's complexity.
Also, take the opportunity to slightly improve the efficiency of the
error cases, by doing a mass subtraction of the refcount, surrounded by
get_page()/put_page().
Also, further simplify (slightly), by waiting until the the successful
end of each routine, to increment *nr.
Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Björn Töpel <bjorn.topel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Fri, 31 Jan 2020 06:12:14 +0000 (22:12 -0800)]
mm/gup.c: use is_vm_hugetlb_page() to check whether to follow huge
No functional change, just leverage the helper function to improve
readability as others.
Link: http://lkml.kernel.org/r/20200113070322.26627-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qiujun Huang [Fri, 31 Jan 2020 06:12:10 +0000 (22:12 -0800)]
mm: fix gup_pud_range
sorry for not processing for a long time. I met it again.
patch v1 https://lkml.org/lkml/2019/9/20/656
do_machine_check()
do_memory_failure()
memory_failure()
hw_poison_user_mappings()
try_to_unmap()
pteval = swp_entry_to_pte(make_hwpoison_entry(subpage));
...and now we have a swap entry that indicates that the page entry
refers to a bad (and poisoned) page of memory, but gup_fast() at this
level of the page table was ignoring swap entries, and incorrectly
assuming that "!pxd_none() == valid and present".
And this was not just a poisoned page problem, but a generaly swap entry
problem. So, any swap entry type (device memory migration, numa
migration, or just regular swapping) could lead to the same problem.
Fix this by checking for pxd_present(), instead of pxd_none().
Link: http://lkml.kernel.org/r/1578479084-15508-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ira Weiny [Fri, 31 Jan 2020 06:12:07 +0000 (22:12 -0800)]
mm/filemap.c: clean up filemap_write_and_wait()
At some point filemap_write_and_wait() and
filemap_write_and_wait_range() got the exact same implementation with
the exception of the range being specified in *_range()
Similar to other functions in fs.h which call *_range(..., 0,
LLONG_MAX), change filemap_write_and_wait() to be a static inline which
calls filemap_write_and_wait_range()
Link: http://lkml.kernel.org/r/20191129160713.30892-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Fri, 31 Jan 2020 06:12:03 +0000 (22:12 -0800)]
mm/debug.c: always print flags in dump_page()
Commit
76a1850e4572 ("mm/debug.c: __dump_page() prints an extra line")
inadvertently removed printing of page flags for pages that are neither
anon nor ksm nor have a mapping. Fix that.
Using pr_cont() again would be a solution, but the commit explicitly
removed its use. Avoiding the danger of mixing up split lines from
multiple CPUs might be beneficial for near-panic dumps like this, so fix
this without reintroducing pr_cont().
Link: http://lkml.kernel.org/r/9f884d5c-ca60-dc7b-219c-c081c755fab6@suse.cz
Fixes: 76a1850e4572 ("mm/debug.c: __dump_page() prints an extra line")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
He Zhe [Fri, 31 Jan 2020 06:12:00 +0000 (22:12 -0800)]
mm/kmemleak: turn kmemleak_lock and object->lock to raw_spinlock_t
kmemleak_lock as a rwlock on RT can possibly be acquired in atomic
context which does work.
Since the kmemleak operation is performed in atomic context make it a
raw_spinlock_t so it can also be acquired on RT. This is used for
debugging and is not enabled by default in a production like environment
(where performance/latency matters) so it makes sense to make it a
raw_spinlock_t instead trying to get rid of the atomic context. Turn
also the kmemleak_object->lock into raw_spinlock_t which is acquired
(nested) while the kmemleak_lock is held.
The time spent in "echo scan > kmemleak" slightly improved on 64core box
with this patch applied after boot.
[bigeasy@linutronix.de: redo the description, update comments. Merge the individual bits: He Zhe did the kmemleak_lock, Liu Haitao the ->lock and Yongxin Liu forwarded Liu's patch.]
Link: http://lkml.kernel.org/r/20191219170834.4tah3prf2gdothz4@linutronix.de
Link: https://lkml.kernel.org/r/20181218150744.GB20197@arrakis.emea.arm.com
Link: https://lkml.kernel.org/r/1542877459-144382-1-git-send-email-zhe.he@windriver.com
Link: https://lkml.kernel.org/r/20190927082230.34152-1-yongxin.liu@windriver.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Liu Haitao <haitao.liu@windriver.com>
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yu Zhao [Fri, 31 Jan 2020 06:11:57 +0000 (22:11 -0800)]
mm/slub.c: avoid slub allocation while holding list_lock
If we are already under list_lock, don't call kmalloc(). Otherwise we
will run into a deadlock because kmalloc() also tries to grab the same
lock.
Fix the problem by using a static bitmap instead.
WARNING: possible recursive locking detected
--------------------------------------------
mount-encrypted/4921 is trying to acquire lock:
(&(&n->list_lock)->rlock){-.-.}, at: ___slab_alloc+0x104/0x437
but task is already holding lock:
(&(&n->list_lock)->rlock){-.-.}, at: __kmem_cache_shutdown+0x81/0x3cb
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&n->list_lock)->rlock);
lock(&(&n->list_lock)->rlock);
*** DEADLOCK ***
Link: http://lkml.kernel.org/r/20191108193958.205102-2-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wangyan [Fri, 31 Jan 2020 06:11:53 +0000 (22:11 -0800)]
ocfs2: use ocfs2_update_inode_fsync_trans() to access t_tid in handle->h_transaction
For the uniform format, we use ocfs2_update_inode_fsync_trans() to
access t_tid in handle->h_transaction
Link: http://lkml.kernel.org/r/6ff9a312-5f7d-0e27-fb51-bc4e062fcd97@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wangyan [Fri, 31 Jan 2020 06:11:50 +0000 (22:11 -0800)]
ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()
I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(),
handle->h_transaction may be NULL in this situation:
ocfs2_file_write_iter
->__generic_file_write_iter
->generic_perform_write
->ocfs2_write_begin
->ocfs2_write_begin_nolock
->ocfs2_write_cluster_by_desc
->ocfs2_write_cluster
->ocfs2_mark_extent_written
->ocfs2_change_extent_flag
->ocfs2_split_extent
->ocfs2_try_to_merge_extent
->ocfs2_extend_rotate_transaction
->ocfs2_extend_trans
->jbd2_journal_restart
->jbd2__journal_restart
// handle->h_transaction is NULL here
->handle->h_transaction = NULL;
->start_this_handle
/* journal aborted due to storage
network disconnection, return error */
->return -EROFS;
/* line 3806 in ocfs2_try_to_merge_extent (),
it will ignore ret error. */
->ret = 0;
->...
->ocfs2_write_end
->ocfs2_write_end_nolock
->ocfs2_update_inode_fsync_trans
// NULL pointer dereference
->oi->i_sync_tid = handle->h_transaction->t_tid;
The information of NULL pointer dereference as follows:
JBD2: Detected IO errors while flushing file data on dm-11-45
Aborting journal on device dm-11-45.
JBD2: Error -5 detected when updating journal superblock for dm-11-45.
(dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30
(dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30
Unable to handle kernel NULL pointer dereference at
virtual address
0000000000000008
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000e74e1338
[
0000000000000008] pgd=
0000000000000000
Internal error: Oops:
96000004 [#1] SMP
Process dd (pid: 22081, stack limit = 0x00000000584f35a9)
CPU: 3 PID: 22081 Comm: dd Kdump: loaded
Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019
pstate:
60400009 (nZCv daif +PAN -UAO)
pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2]
sp :
ffff0000459fba70
x29:
ffff0000459fba70 x28:
0000000000000000
x27:
ffff807ccf7f1000 x26:
0000000000000001
x25:
ffff807bdff57970 x24:
ffff807caf1d4000
x23:
ffff807cc79e9000 x22:
0000000000001000
x21:
000000006c6cd000 x20:
ffff0000091d9000
x19:
ffff807ccb239db0 x18:
ffffffffffffffff
x17:
000000000000000e x16:
0000000000000007
x15:
ffff807c5e15bd78 x14:
0000000000000000
x13:
0000000000000000 x12:
0000000000000000
x11:
0000000000000000 x10:
0000000000000001
x9 :
0000000000000228 x8 :
000000000000000c
x7 :
0000000000000fff x6 :
ffff807a308ed6b0
x5 :
ffff7e01f10967c0 x4 :
0000000000000018
x3 :
d0bc661572445600 x2 :
0000000000000000
x1 :
000000001b2e0200 x0 :
0000000000000000
Call trace:
ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2]
ocfs2_write_end+0x4c/0x80 [ocfs2]
generic_perform_write+0x108/0x1a8
__generic_file_write_iter+0x158/0x1c8
ocfs2_file_write_iter+0x668/0x950 [ocfs2]
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
To prevent NULL pointer dereference in this situation, we use
is_handle_aborted() before using handle->h_transaction->t_tid.
Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.com
Signed-off-by: Yan Wang <wangyan122@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andy Shevchenko [Fri, 31 Jan 2020 06:11:47 +0000 (22:11 -0800)]
ocfs2/dlm: move BITS_TO_BYTES() to bitops.h for wider use
There are users already and will be more of BITS_TO_BYTES() macro. Move
it to bitops.h for wider use.
In the case of ocfs2 the replacement is identical.
As for bnx2x, there are two places where floor version is used. In the
first case to calculate the amount of structures that can fit one memory
page. In this case obviously the ceiling variant is correct and
original code might have a potential bug, if amount of bits % 8 is not
0. In the second case the macro is used to calculate bytes transmitted
in one microsecond. This will work for all speeds which is multiply of
1Gbps without any change, for the rest new code will give ceiling value,
for instance 100Mbps will give 13 bytes, while old code gives 12 bytes
and the arithmetically correct one is 12.5 bytes. Further the value is
used to setup timer threshold which in any case has its own margins due
to certain resolution. I don't see here an issue with slightly shifting
thresholds for low speed connections, the card is supposed to utilize
highest available rate, which is usually 10Gbps.
Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Fri, 31 Jan 2020 06:11:43 +0000 (22:11 -0800)]
ocfs2/dlm: remove redundant assignment to ret
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses Coverity ("Unused value")
Link: http://lkml.kernel.org/r/20191202164833.62865-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Fri, 31 Jan 2020 06:11:40 +0000 (22:11 -0800)]
ocfs2: make local header paths relative to C files
Gang He reports the failure of building fs/ocfs2/ as an external module
of the kernel installed on the system:
$ cd fs/ocfs2
$ make -C /lib/modules/`uname -r`/build M=`pwd` modules
If you want to make it work reliably, I'd recommend to remove ccflags-y
from the Makefiles, and to make header paths relative to the C files. I
think this is the correct usage of the #include "..." directive.
Link: http://lkml.kernel.org/r/20191227022950.14804-1-ghe@suse.com
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Gang He <ghe@suse.com>
Reported-by: Gang He <ghe@suse.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhengbin [Fri, 31 Jan 2020 06:11:36 +0000 (22:11 -0800)]
ocfs2: remove unneeded semicolons
Fixes coccicheck warnings:
fs/ocfs2/cluster/quorum.c:76:2-3: Unneeded semicolon
fs/ocfs2/dlmglue.c:573:2-3: Unneeded semicolon
Link: http://lkml.kernel.org/r/6ee3aa16-9078-30b1-df3f-22064950bd98@linux.alibaba.com
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aditya Pakki [Fri, 31 Jan 2020 06:11:33 +0000 (22:11 -0800)]
fs: ocfs: remove unnecessary assertion in dlm_migrate_lockres
In the only caller of dlm_migrate_lockres() - dlm_empty_lockres(),
target is checked for O2NM_MAX_NODES. Thus, the assertion in
dlm_migrate_lockres() is unnecessary and can be removed. The patch
eliminates such a check.
Link: http://lkml.kernel.org/r/20191218194111.26041-1-pakki001@umn.edu
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luca Ceresoli [Fri, 31 Jan 2020 06:11:30 +0000 (22:11 -0800)]
scripts/spelling.txt: add "issus" typo
Add "issus" and correct it as "issues".
Link: http://lkml.kernel.org/r/20200105221950.8384-1-luca@lucaceresoli.net
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiong [Fri, 31 Jan 2020 06:11:27 +0000 (22:11 -0800)]
scripts/spelling.txt: add more spellings to spelling.txt
Here are some of the common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel. Most of them still
exist in more than two source files.
Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.com
Signed-off-by: Xiong <xndchn@gmail.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / openwrt / staging / blogic.git / log