Luka Perkov [Thu, 20 Feb 2014 17:26:10 +0000 (17:26 +0000)]
imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
- Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
- align pinctrl with upstream
- consolidate multiple patches into one
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39644
Luka Perkov [Thu, 20 Feb 2014 17:26:08 +0000 (17:26 +0000)]
imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39643
Gabor Juhos [Thu, 20 Feb 2014 17:07:56 +0000 (17:07 +0000)]
ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss
When the RB91x device uses a GbE link the connection
suffers from packet loss:
root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
PING 192.168.1.254 (192.168.1.254): 65507 data bytes
--- 192.168.1.254 ping statistics ---
20 packets transmitted, 9 packets received, 55% packet loss
round-trip min/avg/max = 4.570/4.815/4.999 ms
Using a different PLL value fixes the issue.
root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
PING 192.168.1.254 (192.168.1.254): 65507 data bytes
--- 192.168.1.254 ping statistics ---
100 packets transmitted, 100 packets received, 0% packet loss
round-trip min/avg/max = 4.449/5.413/13.870 ms
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39642
Gabor Juhos [Thu, 20 Feb 2014 17:07:51 +0000 (17:07 +0000)]
ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result. I have cleaned up this patch.
When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.
This patch applies cleanly to SVN 39392.
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
- drop the 'rb951ui_wlan_init' function and rework the code to
use the recently introduced rb95x_wlan_init function instead,
- fix GPIO number of the port5 LED,
- rename LEDs according to the standard LED naming conventions,
and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39641
Gabor Juhos [Thu, 20 Feb 2014 17:07:44 +0000 (17:07 +0000)]
kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP cases
This is a backport of code to improve the quality of fq_codel
hashing for 3.10 for some encapsulated protocols.
Not needed in 3.11 and later.
Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4902/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39640
Luka Perkov [Thu, 20 Feb 2014 14:01:28 +0000 (14:01 +0000)]
imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39639
Felix Fietkau [Wed, 19 Feb 2014 19:20:10 +0000 (19:20 +0000)]
gcc: prevent the use of LDRD/STRD on ARMv5TE
These instructions are for 64-bit load/store. On ARMv5TE, the CPU
requires addresses to be aligned to 64-bit. When misaligned, behavior is
undefined (effectively either loads the same word twice on LDRD, or
corrupts surrounding memory on STRD).
On ARMv6 and newer, unaligned access is safe.
Removing these instructions for ARMv5TE is necessary, because GCC
ignores alignment information in pointers and does unsafe optimizations
that have shown up as bugs in various places.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39638
Gabor Juhos [Wed, 19 Feb 2014 12:15:35 +0000 (12:15 +0000)]
ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4850/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39637
Gabor Juhos [Wed, 19 Feb 2014 12:15:34 +0000 (12:15 +0000)]
ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4849/
[juhosg:
- use the Archer C7 specific LED setup instead of adding
identical code]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39636
Gabor Juhos [Wed, 19 Feb 2014 12:15:32 +0000 (12:15 +0000)]
ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4848/
[juhosg:
- rename and refresh kernel patch,
- merge the board setup code into mach-archer-c7.c and drop
mach-tl-wdr49000-v2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39635
Nicolas Thill [Wed, 19 Feb 2014 00:17:19 +0000 (00:17 +0000)]
sunxi: move a lost CONFIG_CHARGER symbol to generic
SVN-Revision: 39634
Nicolas Thill [Tue, 18 Feb 2014 22:29:56 +0000 (22:29 +0000)]
target/sunxi: make REGMAP built-in (used by REGULATOR)
SVN-Revision: 39633
Nicolas Thill [Tue, 18 Feb 2014 22:16:04 +0000 (22:16 +0000)]
target/uml: update README
invoking uml is now simplier, not need to setup console & serial
SVN-Revision: 39632
Nicolas Thill [Tue, 18 Feb 2014 22:15:58 +0000 (22:15 +0000)]
toolchain: update build steps doc
SVN-Revision: 39631
Nicolas Thill [Tue, 18 Feb 2014 22:15:52 +0000 (22:15 +0000)]
mac80211: disable libertas-sd on uml target
SVN-Revision: 39630
Nicolas Thill [Tue, 18 Feb 2014 22:11:24 +0000 (22:11 +0000)]
uboot-envtools: pass target cflags
SVN-Revision: 39629
Steven Barth [Tue, 18 Feb 2014 18:30:47 +0000 (18:30 +0000)]
odhcp6c: readd userclass and vendorclass
SVN-Revision: 39628
Gabor Juhos [Tue, 18 Feb 2014 17:34:18 +0000 (17:34 +0000)]
kernel: refresh configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39627
Gabor Juhos [Tue, 18 Feb 2014 17:34:17 +0000 (17:34 +0000)]
ar71xx: fix unaligned access hacks for tcp timestamps
This missing bit of the hack saves hugely on instruction traps
on tcp connections to ar71xx based routers.
Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4905/
[juhosg: adjust subject, refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39626
Gabor Juhos [Tue, 18 Feb 2014 17:34:16 +0000 (17:34 +0000)]
ar71xx: WNR2200: fix mounting root fs problem
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>
Without this patch, UART output will show only 4 partitions:
[ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.750000] Creating 4 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000050000 : "u-boot"
[ 0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
[ 0.770000] 0x000000070000-0x0000007f0000 : "firmware"
[ 0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"
With this patch, UART out will show 7 partitions:
[ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.750000] Creating 4 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000040000 : "u-boot"
[ 0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.770000] 0x000000050000-0x0000007f0000 : "firmware"
[ 0.780000] 2 netgear-fw partitions found on MTD device firmware
[ 0.780000] 0x000000050000-0x00000014b440 : "kernel"
[ 0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
[ 0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.820000] mtd: device 4 (rootfs) set to be root filesystem
[ 0.830000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
[ 0.840000] 0x0000007f0000-0x000000800000 : "art"
This patch is tested against r39502 of trunk.
Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39625
John Crispin [Tue, 18 Feb 2014 13:34:16 +0000 (13:34 +0000)]
odhcp6c: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39624
John Crispin [Tue, 18 Feb 2014 13:34:12 +0000 (13:34 +0000)]
relayd: add uci validation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39623
John Crispin [Tue, 18 Feb 2014 13:34:08 +0000 (13:34 +0000)]
mac80211: add validation rules
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39622
John Crispin [Tue, 18 Feb 2014 13:34:04 +0000 (13:34 +0000)]
netifd: add validation support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39621
John Crispin [Tue, 18 Feb 2014 13:33:59 +0000 (13:33 +0000)]
hostapd: add validation rules to wireless handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39620
John Crispin [Tue, 18 Feb 2014 13:33:56 +0000 (13:33 +0000)]
ppp: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39619
John Crispin [Tue, 18 Feb 2014 13:33:52 +0000 (13:33 +0000)]
comgt: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39618
John Crispin [Tue, 18 Feb 2014 13:33:47 +0000 (13:33 +0000)]
firewall3: update init.d script to make use of procd
add validation data
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39617
John Crispin [Tue, 18 Feb 2014 13:33:43 +0000 (13:33 +0000)]
ubox: logd did not register its config.reload trigger properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39616
John Crispin [Tue, 18 Feb 2014 13:33:40 +0000 (13:33 +0000)]
base-files: split /etc/init.d/boot into 2 files
this allows us to bind a procd trigger to system.@system[-1]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39615
John Crispin [Tue, 18 Feb 2014 13:33:36 +0000 (13:33 +0000)]
netifd: update to latest git head
this adds support for proto and wireless handler adding uci validation rules
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39614
John Crispin [Tue, 18 Feb 2014 13:33:32 +0000 (13:33 +0000)]
procd: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39613
John Crispin [Tue, 18 Feb 2014 13:33:29 +0000 (13:33 +0000)]
procd: the helper script did not export all functions properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39612
John Crispin [Tue, 18 Feb 2014 13:33:25 +0000 (13:33 +0000)]
ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39611
John Crispin [Tue, 18 Feb 2014 13:33:20 +0000 (13:33 +0000)]
ralink: add gpio_uartf mux group
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39610
John Crispin [Tue, 18 Feb 2014 13:33:16 +0000 (13:33 +0000)]
ralink: fix the gpio mode mapping
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39609
John Crispin [Tue, 18 Feb 2014 13:33:13 +0000 (13:33 +0000)]
authsae: update to latest version
Signed-off-by: Stefan May <smay@4finger.net>
SVN-Revision: 39608
John Crispin [Tue, 18 Feb 2014 13:33:08 +0000 (13:33 +0000)]
openssl: fix up PKG_DEPENDS. there are 2 missing CONFIG_ prefixe
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39607
Felix Fietkau [Tue, 18 Feb 2014 12:27:11 +0000 (12:27 +0000)]
uci: update to latest version, adds preparation for validation support and blobmsg int64 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39606
Steven Barth [Mon, 17 Feb 2014 20:31:21 +0000 (20:31 +0000)]
odhcp6c: send reconfigure-accept again to be compliant
SVN-Revision: 39605
Steven Barth [Mon, 17 Feb 2014 20:30:29 +0000 (20:30 +0000)]
odhcpd: Fix RA interval + add support for prefixes > 64 and < 97
SVN-Revision: 39604
Zoltan Herpai [Mon, 17 Feb 2014 11:49:34 +0000 (11:49 +0000)]
3.13: revert r39601 as the symbol is already there
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39602
Zoltan Herpai [Mon, 17 Feb 2014 10:57:11 +0000 (10:57 +0000)]
3.13: add missing NF_TABLES symbol - until someone packages it
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39601
Zoltan Herpai [Mon, 17 Feb 2014 10:20:53 +0000 (10:20 +0000)]
3.13: add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39600
Luka Perkov [Sun, 16 Feb 2014 21:51:10 +0000 (21:51 +0000)]
cmake: upgrade to 2.8.12.2
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39598
Steven Barth [Sun, 16 Feb 2014 11:20:22 +0000 (11:20 +0000)]
netifd: work around dangling prefix kernel-routes (fixes #14963)
SVN-Revision: 39597
Luka Perkov [Sun, 16 Feb 2014 00:14:29 +0000 (00:14 +0000)]
kirkwood: dockstar: remove sata from packages
The dockstar doesn't have any sata ports.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39596
Luka Perkov [Sun, 16 Feb 2014 00:14:27 +0000 (00:14 +0000)]
kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39595
Luka Perkov [Sun, 16 Feb 2014 00:14:26 +0000 (00:14 +0000)]
uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39594
Luka Perkov [Sat, 15 Feb 2014 23:53:10 +0000 (23:53 +0000)]
kirkwood: update support for dockstar
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39593
Luka Perkov [Sat, 15 Feb 2014 23:53:09 +0000 (23:53 +0000)]
kirkwood: update support for ib62x0
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39592
Luka Perkov [Sat, 15 Feb 2014 23:53:08 +0000 (23:53 +0000)]
kirkwood: update support for iconnect
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39591
Luka Perkov [Sat, 15 Feb 2014 23:53:07 +0000 (23:53 +0000)]
uboot-kirkwood: update to 2013.10
Tested on:
* Cloud Engines Pogoplug E02
* RaidSonic ICY BOX IB-NAS62x0
* Iomega Iconnect
Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.
Sample ib62x0 commands for running second stage bootloader:
tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000
Sample ib62x0 commands for flashing second stage bootloader:
tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000
While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39590
Luka Perkov [Sat, 15 Feb 2014 22:54:35 +0000 (22:54 +0000)]
kernel: rtl8306: update reset function
Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 39589
Luka Perkov [Sat, 15 Feb 2014 22:54:34 +0000 (22:54 +0000)]
lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 39588
Luka Perkov [Sat, 15 Feb 2014 22:54:32 +0000 (22:54 +0000)]
lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 39587
Steven Barth [Fri, 14 Feb 2014 21:21:44 +0000 (21:21 +0000)]
netifd: fix source-routing breaking 6in4 + others
6in4 historically allowed an ip6addr without a mask however the newly
introduced source-routing segfaulted in this scenario (#14958 + #14858).
Fixes include: "Fix ubus route src mask printing" and
"Disable netlink auto ack" (thanks to Hans Dedecker)
SVN-Revision: 39586
Imre Kaloz [Fri, 14 Feb 2014 10:09:07 +0000 (10:09 +0000)]
use the default package set
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39584
Jo-Philipp Wich [Thu, 13 Feb 2014 21:19:00 +0000 (21:19 +0000)]
ar71xx: fix mtdpartsize macro in image Makefile (#14961)
The mtdpartsize macro triggers shell errors on various Linux distributions
when the partname argument $(1) does not appear within the partmap $(2).
Change the sed pattern to only emit anything if a successful substitution
occured and only evaluate the arithmetic expression if something was printed
by the sed program.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39583
Imre Kaloz [Thu, 13 Feb 2014 13:27:14 +0000 (13:27 +0000)]
upgrade 3.13 targets to 3.13.2, refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org
SVN-Revision: 39582
Imre Kaloz [Thu, 13 Feb 2014 12:57:36 +0000 (12:57 +0000)]
upgrade 3.12 to 3.12.10
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39581
Imre Kaloz [Thu, 13 Feb 2014 10:43:32 +0000 (10:43 +0000)]
change image generation logic
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39580
Imre Kaloz [Wed, 12 Feb 2014 15:43:14 +0000 (15:43 +0000)]
handle "neon" fpu type
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39579
Imre Kaloz [Wed, 12 Feb 2014 15:38:08 +0000 (15:38 +0000)]
handle some CONFIG_TARGET_ROOTFS_INCLUDE_ foo
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39578
Imre Kaloz [Wed, 12 Feb 2014 10:51:46 +0000 (10:51 +0000)]
copy initramfs zImage to the bin dir as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39577
Imre Kaloz [Wed, 12 Feb 2014 10:48:33 +0000 (10:48 +0000)]
generate ubifs images
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39576
Steven Barth [Wed, 12 Feb 2014 08:54:43 +0000 (08:54 +0000)]
odhcp6c: remove source-restriction from local routes again (broke relaying)
SVN-Revision: 39575
Luka Perkov [Wed, 12 Feb 2014 00:46:02 +0000 (00:46 +0000)]
imx6: drop 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39574
Luka Perkov [Wed, 12 Feb 2014 00:46:00 +0000 (00:46 +0000)]
imx6: add initial 3.13 support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39573
Felix Fietkau [Tue, 11 Feb 2014 15:00:55 +0000 (15:00 +0000)]
mac80211: send wpa frames through the WMM voice queue - improves connection reliability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39572
Felix Fietkau [Tue, 11 Feb 2014 15:00:51 +0000 (15:00 +0000)]
ath9k: add p2p client mode support powersave patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39571
Felix Fietkau [Tue, 11 Feb 2014 15:00:36 +0000 (15:00 +0000)]
rtl8187: fix crashes on mips caused by misaligned DMA and cache issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39570
Luka Perkov [Tue, 11 Feb 2014 02:16:04 +0000 (02:16 +0000)]
mvebu: enable NAND controller support
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
SVN-Revision: 39569
Luka Perkov [Tue, 11 Feb 2014 02:07:47 +0000 (02:07 +0000)]
mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)
This Armada XP GP board from Marvell comes with:
* 2GB DDR3 DIMM
* 1GB NAND flash (8-bit interface)
* 16MB NOR flash (16-bot interrface)
* 16MB SPI flash
* SDIO module
* 3 PCIe
* 1 SATA link
* 2 USB EHCI
* 1 internal SSD
* 4 Ethernet Gigabit
* 1 RS232 port over USB
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
SVN-Revision: 39568
Luka Perkov [Tue, 11 Feb 2014 02:07:46 +0000 (02:07 +0000)]
mvebu: update kernel config
The config-3.10 doesn't specify the configuration of the backported PCI
features, and the Marvell EBU Device Bus Controller, this will prevent
a clean compile. This patch enables these features to archive a clean compile
without having to specify the state of these configuration after starting to
compile.
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
SVN-Revision: 39567
Luka Perkov [Tue, 11 Feb 2014 02:07:44 +0000 (02:07 +0000)]
mvebu: backport mainline patches from kernel 3.13
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13.
This work mainly covers:
* Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
between the PXA family, and the Armada family.
* timer initialization update, and access function for the Armada family.
* Generic IRQ handling backporting.
* Some bug fixes.
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39566
Luka Perkov [Tue, 11 Feb 2014 02:07:41 +0000 (02:07 +0000)]
mvebu: backport mainline patches from kernel 3.12
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12.
This work mainly covers:
* Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
between the PXA family,and the Armada family.
* Further updates to the mvebu MBus.
* Work and ground work for enabling MSI on the Armada family.
* some phy / mdio bus initialization related work.
* Device tree binding documentation update.
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39565
Luka Perkov [Tue, 11 Feb 2014 02:07:38 +0000 (02:07 +0000)]
mvebu: backport mainline patches from kernel 3.11
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11.
This work mainly covers:
* Enabling USB storage, and PCI to mvebu_defconfig.
* Add support for NOR flash.
* Some PCI device tree related updates, and bus parsing.
* Adding Armada XP & 370 PCI driver, and update some clock gating
specifics.
* Introduce Marvell EBU Device Bus driver.
* Enaling USB in the armada*.dts.
* Enabling, and updating the mvebu-mbus.
* Some SATA and Ethernet related fixes.
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39564
Hauke Mehrtens [Mon, 10 Feb 2014 20:30:24 +0000 (20:30 +0000)]
kernel: fix kmod-usb-phy-nop
phy-generic.ko was renamed and moved from kernel version to version.
kernel <= 3.9: nop-usb-xceiv.ko
kernel >= 3.10 && <= 3.11: phy-nop.ko
kernel >= 3.12: phy-generic.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39563
Hauke Mehrtens [Mon, 10 Feb 2014 20:12:13 +0000 (20:12 +0000)]
kernel: fix kmod-usb-net-smsc95xx
smsc95xx.ko depends on crc16.ko on kernel >= 3.8
There was an additional kmod-usb-net-smsc95xx definition in the mxs
target code which conflicted with the one in the common area.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39562
Imre Kaloz [Mon, 10 Feb 2014 15:30:01 +0000 (15:30 +0000)]
keep initramfs the default for us
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39561
Imre Kaloz [Mon, 10 Feb 2014 15:29:11 +0000 (15:29 +0000)]
phy-omap-control.ko is already part of a different package
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39560
Imre Kaloz [Mon, 10 Feb 2014 14:40:27 +0000 (14:40 +0000)]
additional omap/musb related fixes
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39559
Imre Kaloz [Mon, 10 Feb 2014 14:38:22 +0000 (14:38 +0000)]
fixup ethernet gadget, disable EEM support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39558
Imre Kaloz [Mon, 10 Feb 2014 14:35:20 +0000 (14:35 +0000)]
don't build in usb stuff
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39557
Imre Kaloz [Mon, 10 Feb 2014 14:34:08 +0000 (14:34 +0000)]
package the driver for smsc95xx chips
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39556
Imre Kaloz [Sun, 9 Feb 2014 17:08:33 +0000 (17:08 +0000)]
add additional omap related changes
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39555
Imre Kaloz [Sun, 9 Feb 2014 16:14:30 +0000 (16:14 +0000)]
additional musb fixups
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39554
Imre Kaloz [Sun, 9 Feb 2014 14:24:28 +0000 (14:24 +0000)]
musb depends on usb-gadget support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39550
Imre Kaloz [Sun, 9 Feb 2014 14:08:10 +0000 (14:08 +0000)]
use musb in PIO mode, as DMA support is platform dependent
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39549
Imre Kaloz [Sun, 9 Feb 2014 14:02:59 +0000 (14:02 +0000)]
add more musb symbols
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39548
Imre Kaloz [Sun, 9 Feb 2014 13:46:16 +0000 (13:46 +0000)]
fix logic error on fpu cflags selection
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39547
Imre Kaloz [Sun, 9 Feb 2014 13:36:10 +0000 (13:36 +0000)]
make musb available for omap as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39546
Imre Kaloz [Sun, 9 Feb 2014 13:02:17 +0000 (13:02 +0000)]
rename Kconfig symbol to the current one
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39544
Imre Kaloz [Sun, 9 Feb 2014 13:01:00 +0000 (13:01 +0000)]
move some omap24xx modules to the generic Makefile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39543
Hauke Mehrtens [Sat, 8 Feb 2014 16:54:44 +0000 (16:54 +0000)]
kernel: add kmod-usb-net-kalmia
This patch adds a new kernel module for Samsung USB LTE modems.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 39535
Hauke Mehrtens [Sat, 8 Feb 2014 16:32:37 +0000 (16:32 +0000)]
kernel: XHCI PCI quirks for kernel 3.12 and 3.13
This adds empty definitions for the PCI quirks functions when they
should not be included in the kernel.
This is based on a patch by Daniel <daniel@makrotopia.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39534
Hauke Mehrtens [Sat, 8 Feb 2014 15:36:03 +0000 (15:36 +0000)]
kernel: fix bridge compilation on kernel 3.13
The int brnf_call_ebtables in the header should be extern, otherwise
every object file gets its own int and they will conflict when linking
the binary.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39533
Hauke Mehrtens [Sat, 8 Feb 2014 15:34:12 +0000 (15:34 +0000)]
kernel: negate kernel version dependencies to fix config for new kernel versions
This fixes some problems on kernel 3.13 and also removes the reference to LINUX_3_7.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39532
Hauke Mehrtens [Sat, 8 Feb 2014 15:31:57 +0000 (15:31 +0000)]
kernel: add missing config symbol for 3.13.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39531
projects / openwrt / staging / blocktrron.git / log