drm/connector: Introduce a TV margins structure

The TV margins has been defined as a structure inside the
drm_connector_state structure so far. However, we will need it in other
structures as well, so let's move that structure definition so that it can
be reused.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/38b773b03f15ec7a135cdf8f7db669e5ada20cf2.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Allow to specify rotation and reflection on the commandline

Rotations and reflections setup are needed in some scenarios to initialise
properly the initial framebuffer. Some drivers already had a bunch of
quirks to deal with this, such as either a private kernel command line
parameter (omapdss) or on the device tree (various panels).

In order to accomodate this, let's create a video mode parameter to deal
with the rotation and reflexion.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Support modes names on the command line

The drm subsystem also uses the video= kernel parameter, and in the
documentation refers to the fbdev documentation for that parameter.

However, that documentation also says that instead of giving the mode using
its resolution we can also give a name. However, DRM doesn't handle that
case at the moment. Even though in most case it shouldn't make any
difference, it might be useful for analog modes, where different standards
might have the same resolution, but still have a few different parameters
that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example).

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com

drm/modes: Rewrite the command line parser

Rewrite the command line parser in order to get away from the state machine
parsing the video mode lines.

Hopefully, this will allow to extend it more easily to support named modes
and / or properties set directly on the command line.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e32cd4009153b184103554009135c7bf7c9975d7.1560783090.git-series.maxime.ripard@bootlin.com

drm/client: Change drm_client_panel_rotation name

The drm_client_panel_rotation function has been used so far to set the
default rotation based on the panel orientation.

However, we can have more sources of information to make that decision,
starting with the command line that we will introduce later in this series.

Change the name to remove the panel mention.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8cb0f0d9569d41685bbf30a1538da6578cd2769b.1560783090.git-series.maxime.ripard@bootlin.com

drm/client: Restrict the rotation check to the rotation itself

The drm_client_rotation has a check on the rotation value, but the
reflections are also stored in the same variable, and the check doesn't
take this into account.

Therefore, even though we might have a valid rotation, if we're also using
a reflection parameter, the test will fail for no particular reason.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf4de0cdef20aac6c654b7b73c2ab3e317c46803.1560783090.git-series.maxime.ripard@bootlin.com

drm/client: Restrict the plane_state scope

The drm_client_modeset_commit_atomic function uses two times the
plane_state variable in inner blocks of code, but the variable has a scope
global to this function.

This will lead to inadvertent devs to reuse the variable in the second
block with the value left by the first, without any warning from the
compiler since value would have been initialized.

Fix this by moving the variable declaration to the proper scope.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8bd9696ea915a4ad08be6d93a4d9565e8d6aa2f3.1560783090.git-series.maxime.ripard@bootlin.com

drm/connector: Add documentation for drm_cmdline_mode

The struct drm_cmdline_mode holds the result of the command line parsers.
However, it wasn't documented so far, so let's do that.

Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com

drm/vkms: add crc sources list

Other drivers are able to list crc sources when accessing
/sys/kernel/debug/dri/.../crtc-0/crc/control

Even though VKMS now supports only 'auto' mode, it is more consistent to
have the list available to the userspace.

Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613121802.2193-3-oleg.vasilev@intel.com

drm/vkms: Move format arrays to vkms_plane.c

No need to have them multiple times.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-5-daniel.vetter@ffwll.ch

drm: Permit video-buffers writecombine mapping for MIPS

Since commit 4b050ba7a66c ("MIPS: pgtable.h: Implement the
pgprot_writecombine function for MIPS") and commit c4687b15a848 ("MIPS: Fix
definition of pgprot_writecombine()") write-combine vma mapping is
available to be used by kernel subsystems for MIPS. In particular the
uncached accelerated attribute is requested to be set by ioremap_wc()
method and by generic PCI memory pages/ranges mapping methods. The same
is done by the drm_io_prot()/ttm_io_prot() functions in case if
write-combine flag is set for vma's passed for mapping. But for some
reason the pgprot_writecombine() method calling is ifdefed to be a
platform-specific with MIPS system being marked as lacking of one. At the
very least it doesn't reflect the current MIPS platform implementation.
So in order to improve the DRM subsystem performance on MIPS with UCA
mapping enabled, we need to have pgprot_writecombine() called for buffers,
which need store operations being combined. In case if particular MIPS
chip doesn't support the UCA attribute, the mapping will fall back to
noncached.

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Vadim V. Vlasov <vadim.vlasov@t-platforms.ru>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423123122.32573-1-fancer.lancer@gmail.com

drm/rcar-du: Fix error check when retrieving crtc state

drm_atomic_get_crtc_state() returns an error pointer when it fails, so
the null check is doing nothing here.

Credit to 0-day/Dan Carpenter for reporting this.

Fixes: 6f3b62781bbd ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190617181548.124134-1-sean@poorly.run

drm/panfrost: Expose performance counters through unstable ioctls

Expose performance counters through 2 driver specific ioctls: one to
enable/disable the perfcnt block, and one to dump the counter values.

There are discussions to expose global performance monitors (those
counters that can't be retrieved on a per-job basis) in a consistent
way, but this is likely to take time to settle on something that works
for various HW/users.
The ioctls are marked unstable so we can get rid of them when the time
comes. We initally went for a debugfs-based interface, but this was
making the transition to per-FD address space more complicated (we need
to specify the namespace the GPU has to use when dumping the perf
counters), hence the decision to switch back to driver specific ioctls
which are passed the FD they operate on and thus will have a dedicated
address space attached to them.

Other than that, the implementation is pretty simple: it basically dumps
all counters and copy the values to a userspace buffer. The parsing is
left to userspace which has to know the specific layout that's used
by the GPU (layout differs on a per-revision basis).

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-5-boris.brezillon@collabora.com

drm/panfrost: Add an helper to check the GPU generation

All models with an ID >= 0x1000 are Bifrost GPUs for now (might change
with new gens).

Suggested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-4-boris.brezillon@collabora.com

drm/panfrost: Add a module parameter to expose unstable ioctls

We plan to expose performance counters through 2 driver specific
ioctls until there's a solution to expose them in a generic way.
In order to be able to deprecate those ioctls when this new
infrastructure is in place we add an unsafe module parameter that
will keep those ioctls hidden unless it's set to true (which also
has the effect of tainting the kernel).

All unstable ioctl handlers should use panfrost_unstable_ioctl_check()
to check whether they're supposed to handle the request or reject it
with ENOSYS.

Suggested-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-3-boris.brezillon@collabora.com

drm/panfrost: Move gpu_{write, read}() macros to panfrost_regs.h

So they can be used from other files.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618081648.17297-2-boris.brezillon@collabora.com

drm/gem: Unexport drm_gem_(un)pin/v(un)map

They're purely for internal use, not for drivers.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-3-daniel.vetter@ffwll.ch

drm/todo: Improve drm_gem_object funcs todo

We're kinda going in the wrong direction. Spotted while typing better
gem/prime docs.

Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-2-daniel.vetter@ffwll.ch

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

Pick up rc3 and rc4 and the merges from the other branches,
we're a bit out of date.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/rockchip: Base adjustments of the mode based on prev adjustments

In vop_crtc_mode_fixup() we fixup the mode to show what we actually
will be able to achieve.  However we should base our adjustments on
any previous adjustments that were made.

As an example, the dw_hdmi driver may wish to make some small
adjustments to clock rates in its atomic_check() function.  If it
does, it will update the adjusted_mode.  We shouldn't throw away those
adjustments.

NOTE: the version of the dw_hdmi driver upstream doesn't _actually_
make such adjustments, but downstream in Chrome OS it does.  It is
plausible that one day we'll figure out how to cleanly make that
happen in an upstream-friendly way, so we should prepare by using the
right mode.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-2-dianders@chromium.org

drm/rockchip: Properly adjust to a true clock in adjusted_mode

When fixing up the clock in vop_crtc_mode_fixup() we're not doing it
quite correctly.  Specifically if we've got the true clock 266666667 Hz,
we'll perform this calculation:
   266666667 / 1000 => 266666

Later when we try to set the clock we'll do clk_set_rate(266666 *
1000).  The common clock framework won't actually pick the proper clock
in this case since it always wants clocks <= the specified one.

Let's solve this by using DIV_ROUND_UP.

Fixes: b59b8de31497 ("drm/rockchip: return a true clock rate to adjusted_mode")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.org

drm/vc4: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114548.GC13119@kroah.com

drm/dp: Add DP_DPCD_QUIRK_NO_SINK_COUNT

CH7511 eDP->LVDS bridge doesn't seem to set SINK_COUNT properly
causing i915 to detect it as disconnected. Add a quirk to ignore
SINK_COUNT on these devices.

Cc: David S. <david@majinbuu.com>
Cc: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Tested-by: Peteris Rudzusiks <peteris.rudzusiks@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105406
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528140650.19230-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com> #irc

drm: add debug print to update_vblank_count

Since we are logging all vblank counter updates 30 lines below,
it is also good to have some details whether and how vblank count
difference is calculated.

Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613121802.2193-1-oleg.vasilev@intel.com

drm/panfrost: Align GEM objects GPU VA to 2MB

In order to increase the chances of using 2MB pages, we need to align the
GPU VA mapping to 2MB. Only do this if the object size is 2MB or more.

Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610165806.24854-1-robh@kernel.org

drm: debugfs: make drm_debugfs_create_files() never fail

As stated before, there is no need to care if a debugfs function
succeeds or not, and no code logic in the kernel should ever change
based on a debugfs function return value, so make
drm_debugfs_create_files() never fail.  If it encounters an
odd/rare/impossible error (i.e. out of memory, or a duplicate debugfs
filename to be created), just keep on moving as if nothing improper had
happened.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614095110.3716-2-gregkh@linuxfoundation.org

drm/rockchip: cdn-dp: correct rate in the struct drm_dp_link assignment

The value stored in the rate field of struct drm_dp_link should
be the actual link-rate and not the bw_code.

Right now the driver stores the code and converts it to the rate.
So fixup the driver to store the rate itself.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605080424.28731-1-sandor.yu@nxp.com

drm/rockchip: dw_hdmi: add basic rk3228 support

Like the RK3328, RK322x SoCs offer a Synopsis DesignWare HDMI transmitter
and an Innosilicon HDMI PHY.

Add a new dw_hdmi_plat_data struct, rk3228_hdmi_drv_data.
Assign a set of mostly generic rk3228_hdmi_phy_ops functions.
Add dw_hdmi_rk3228_setup_hpd() to enable the HDMI HPD and DDC lines.

Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522224631.25164-1-justin.swartz@risingedge.co.za

Merge tag 'drm-misc-next-2019-06-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.3:

UAPI Changes:

Cross-subsystem Changes:
- Add code to signal all dma-fences when freed with pending signals.
- Annotate reservation object access in CONFIG_DEBUG_MUTEXES

Core Changes:
- Assorted documentation fixes.
- Use irqsave/restore spinlock to add crc entry.
- Move code around to drm_client, for internal modeset clients.
- Make drm_crtc.h and drm_debugfs.h self-contained.
- Remove drm_fb_helper_connector.
- Add bootsplash to todo.
- Fix lock ordering in pan_display_legacy.
- Support pinning buffers to current location in gem-vram.
- Remove the now unused locking functions from gem-vram.
- Remove the now unused kmap-object argument from vram helpers.
- Stop checking return value of debugfs_create.
- Add atomic encoder enable/disable helpers.
- pass drm_atomic_state to atomic connector check.
- Add atomic support for bridge enable/disable.
- Add self refresh helpers to core.

Driver Changes:
- Add extra delay to make MTP SDM845 work.
- Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip.
- Add zpos and ?BGR8888 support to meson.
- More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis.
- Allow synopsis to unwedge the i2c hdmi bus.
- Add orientation quirks for GPD panels.
- Edid cleanups and fixing handling for edid < 1.2.
- Add runtime pm to stm.
- Handle s/r in dw-hdmi.
- Add hooks for power on/off to dsi for stm.
- Remove virtio dirty tracking code, done in drm core.
- Rework BO handling in ast and mgag200.

Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c,
needed #include <linux/slab.h> to make it compile.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com

dma-buf: add show_fdinfo handler

The show_fdinfo handler exports the same information available through
debugfs on a per-buffer basis.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-4-fengc@google.com

dma-buf: add DMA_BUF_SET_NAME ioctls

This patch adds complimentary DMA_BUF_SET_NAME  ioctls, which lets
userspace processes attach a free-form name to each buffer.

This information can be extremely helpful for tracking and accounting
shared buffers.  For example, on Android, we know what each buffer will
be used for at allocation time: GL, multimedia, camera, etc.  The
userspace allocator can use DMA_BUF_SET_NAME to associate that
information with the buffer, so we can later give developers a
breakdown of how much memory they're allocating for graphics, camera,
etc.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-3-fengc@google.com

dma-buf: give each buffer a full-fledged inode

By traversing /proc/*/fd and /proc/*/map_files, processes with CAP_ADMIN
can get a lot of fine-grained data about how shmem buffers are shared
among processes.  stat(2) on each entry gives the caller a unique
ID (st_ino), the buffer's size (st_size), and even the number of pages
currently charged to the buffer (st_blocks / 512).

In contrast, all dma-bufs share the same anonymous inode.  So while we
can count how many dma-buf fds or mappings a process has, we can't get
the size of the backing buffers or tell if two entries point to the same
dma-buf.  On systems with debugfs, we can get a per-buffer breakdown of
size and reference count, but can't tell which processes are actually
holding the references to each buffer.

Replace the singleton inode with full-fledged inodes allocated by
alloc_anon_inode().  This involves creating and mounting a
mini-pseudo-filesystem for dma-buf, following the example in fs/aio.c.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-2-fengc@google.com

drm/amdgpu: Fix connector atomic_check compilation fail

I missed amdgpu in my connnector_helper_funcs->atomic_check conversion,
which is understandably causing compilation failures.

Fixes: 6f3b62781bbd ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: dri-devel@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614002713.141340-1-sean@poorly.run

drm/connector: Fix kerneldoc warning in HDR_OUTPUT_METADATA description

Fixes the following warning:
../drivers/gpu/drm/drm_connector.c:981: WARNING: Definition list ends without a blank line; unexpected unindent.

Fixes: a09db883e5d9 ("drm: Fix docbook warnings in hdr metadata helper structures")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com>
Cc: Hans Verkuil <hansverk@cisco.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: Sean Paul <sean@poorly.run> (v1)
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613151727.133696-1-sean@poorly.run

drm/rockchip: Use dirtyfb helper

Instead of flushing all vops every time we get a dirtyfb call, use the
damage helper to kick off an atomic commit. Even though we don't use
damage clips, the helper commit will force us through the normal
psr_inhibit_get/put sequence.

Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- None

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-7-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-7-sean@poorly.run

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-7-sean@poorly.run

drm: Add helpers to kick off self refresh mode in drivers

This patch adds a new drm helper library to help drivers implement
self refresh. Drivers choosing to use it will register crtcs and
will receive callbacks when it's time to enter or exit self refresh
mode.

In its current form, it has a timer which will trigger after a
driver-specified amount of inactivity. When the timer triggers, the
helpers will submit a new atomic commit to shut the refreshing pipe
off. On the next atomic commit, the drm core will revert the self
refresh state and bring everything back up to be actively driven.

From the driver's perspective, this works like a regular disable/enable
cycle. The driver need only check the 'self_refresh_active' state in
crtc_state. It should initiate self refresh mode on the panel and enter
an off or low-power state.

Changes in v2:
- s/psr/self_refresh/ (Daniel)
- integrated the psr exit into the commit that wakes it up (Jose/Daniel)
- made the psr state per-crtc (Jose/Daniel)
Changes in v3:
- Remove the self_refresh_(active|changed) from connector state (Daniel)
- Simplify loop in drm_self_refresh_helper_alter_state (Daniel)
- Improve self_refresh_aware comment (Daniel)
- s/self_refresh_state/self_refresh_data/ (Daniel)
Changes in v4:
- Move docbook location below panel (Daniel)
- Improve docbook with references and more detailed explanation (Daniel)
- Instead of register/unregister, use init/cleanup (Daniel)
Changes in v5:
- Resolved conflict in drm_atomic_helper.c #include block
- Resolved conflict in rst with HDCP helper docs
Changes in v6:
- Fix include ordering, clean up forward declarations (Sam)

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run

drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state

Everyone who implements connector_helper_funcs->atomic_check reaches
into the connector state to get the atomic state. Instead of continuing
this pattern, change the callback signature to just give atomic state
and let the driver determine what it does and does not need from it.

Eventually all atomic functions should do this, but that's just too much
busy work for me.

Changes in v3:
- Added to the set
Changes in v4:
- None
Changes in v5:
- intel_digital_connector_atomic_check declaration moved to i915_atomic.h

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-5-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-5-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds]
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-5-sean@poorly.run

drm: Add atomic variants for bridge enable/disable

This patch adds atomic variants for all of
pre_enable/enable/disable/post_disable bridge functions. These will be
called from the appropriate atomic helper functions. If the bridge
driver doesn't implement the atomic version of the function, we will
fall back to the vanilla implementation.

Note that some drivers call drm_bridge_disable directly, and these cases
are not covered. It's up to the driver to decide whether to implement
both atomic_disable and disable, or if it's not necessary.

Changes in v3:
- Added to the patchset
Changes in v4:
- Fix up docbook references (Daniel)
Changes in v5:
- None

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-4-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-4-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-4-sean@poorly.run

drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers

Add functions to the atomic core to retrieve the old and new connectors
associated with an encoder in a drm_atomic_state. This is useful for
encoders and bridges that need to access the connector, for instance for
the drm_display_info.

The CRTC associated with the encoder can also be retrieved through the
connector state, and from it, the old and new CRTC states.

Changed in v4:
- Added to the set
Changed in v5:
- Fix up docbook (Daniel & Laurent)
Changed in v6:
- Updated commit subject (Sam)

Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[seanpaul removed WARNs from helpers and added docs to explain why
returning NULL might be valid]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run

drm: Add atomic variants of enable/disable to encoder helper funcs

This patch adds atomic_enable and atomic_disable callbacks to the
encoder helpers. This will allow encoders to make informed decisions in
their start-up/shutdown based on the committed state.

Aside from the new hooks, this patch also introduces the new signature
for .atomic_* functions going forward. Instead of passing object state
(well, encoders don't have atomic state, but let's ignore that), we pass
the entire atomic state so the driver can inspect more than what's
happening locally.

This is particularly important for the upcoming self refresh helpers.

Changes in v3:
- Added patch to the set
Changes in v4:
- Move atomic_disable above prepare (Daniel)
- Add breadcrumb to .enable() docbook (Daniel)
Changes in v5:
- None
Changes in v6:
- Tweak kerneldoc some more (Sam)

Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-2-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611204959.180855-1-sean@poorly.run

sti: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114618.GD13119@kroah.com

drm: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Because there is no need to check these functions, a number of local
functions can be made to return void to simplify things as nothing can
fail.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613133439.GA6715@kroah.com

drm/bridge: analogix_dp: Convert to GPIO descriptors

This converts the Analogix display port to use GPIO descriptors
instead of DT-extracted numbers.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609231339.22136-1-linus.walleij@linaro.org

drm/bridge: analogix-anx78xx: Drop of_gpio.h include

This include is only used for some gpio drivers and consumers
that look up GPIO numbers directly from the device tree.
This driver does not use it and only needs <linux/gpio/consumer.h>.
Delete the unused include.

Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609223254.8523-1-linus.walleij@linaro.org

drm/bridge: analogix_dp: possible condition with no effect (if == else)

fix below warning reported by coccicheck

./drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1414:6-8: WARNING:
possible condition with no effect (if == else)

Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190525175937.GA29368@hari-Inspiron-1545

panel: rocktech: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613115717.GB26335@kroah.com

vga_switcheroo: no need to check return value of debugfs_create functions

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Also, because there is no need to save the file dentry, remove the local
variable and just recursively delete the whole directory when shutting
down.

Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613114455.GA13119@kroah.com

drm: Remove functions with kmap-object argument from GEM VRAM helpers

The GEM VRAM functions with kmap-object argument are not required any
longer. Remove them.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-10-tzimmermann@suse.de

drm: Remove lock interfaces from GEM VRAM helpers

The lock functions and the locked-pin/unpin functions of GEM VRAM are not
required any longer. Remove them.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-9-tzimmermann@suse.de

drm/mgag200: Rewrite cursor handling

The cursor handling in mgag200 is complicated to understand. It touches a
number of different BOs, but doesn't really use all of them.

Rewriting the cursor update reduces the amount of cursor state. There are
two BOs for double-buffered HW updates. The source BO updates the one that
is currently not displayed and then switches buffers. Explicit BO locking
has been removed from the code. BOs are simply pinned and unpinned in video
RAM.

v2:
* pin cursor BOs to current location

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-8-tzimmermann@suse.de

drm/mgag200: Pin framebuffer BO during dirty update

Another explicit lock operation of a GEM VRAM BO is located in mgag200's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.

v2:
* update with pin flag of 0

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-7-tzimmermann@suse.de

drm/ast: Pin framebuffer BO during dirty update

Another explicit lock operation of a GEM VRAM BO is located in AST's
framebuffer update code. Instead of locking the BO, we pin it to wherever
it is.

v2:
* update with pin flag of 0

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-6-tzimmermann@suse.de

drm/ast: Pin and map cursor source BO during update

The ast driver used to lock the cursor source BO during updates. Locking
should be done internally by the BO's implementation, so we pin it instead
to system memory. The mapping information is also stored in the BO. No
need to have an extra argument to the kmap function.

v2:
* pin cursor BOs to current location

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-5-tzimmermann@suse.de

drm/ast: Remove obsolete or unused cursor state

The ast driver's data structures store unused or uncecessary cursor
state. Most of the cursor state is already stored elsewhere and can
be retrieved when necessary. Remove the obsolete fields and adapt
users accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-4-tzimmermann@suse.de

drm/ast: Unpin cursor BO during cleanup

The unpin operation was missing from ast_cursor_fini(). Fixed now.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-3-tzimmermann@suse.de

drm/gem-vram: Support pinning buffers to current location

Pinning a buffer prevents it from being moved to a different memory
location. For some operations, such as buffer updates, it is not
important where the buffer is located. Setting the pin function's
pl_flag argument to 0 will pin the buffer to whereever it is stored.

v2:
* document pin flags in PRIME pin helper

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-2-tzimmermann@suse.de

drm/mcde: Fix an uninitialized variable

We never set "vblank" to "false".

Current versions of GCC will initialize it to zero automatically at
certain optimization levels so that's probably why this didn't show up
in testing.

Fixes: 5fc537bfd000 ("drm/mcde: Add new driver for ST-Ericsson MCDE")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529113458.GG19119@mwanda

drm/ast: Drop fb_debug_enter/leave

ast doesn't implement the mode_set_base_atomic hook this would need,
so this is dead code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612091253.26413-2-daniel.vetter@ffwll.ch

drm/virtio: drop framebuffer dirty tracking code

No need to have our own implementation,
atomic helpers can do it for us.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190611125408.29421-1-kraxel@redhat.com

drm: Tweak drm_encoder_helper_funcs.enable kerneldoc

I copied the kerneldoc for encoder_funcs.atomic_enable from encoder_funcs.enable
in a recent patch [1]. Sam rightly pointed out in the review that "for symmetry
with" text is awkward [2]. So here's a patch to fix up the source of the awkward
language.

[1] https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run
[2] https://patchwork.freedesktop.org/patch/msgid/20190611185352.GA16305@ravnborg.org

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612150038.194843-1-sean@poorly.run

dma-fence/reservation: Markup rcu protected access for DEBUG_MUTEXES

Mark the access to reservation_object.fence as being protected to
silence sparse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612132830.31221-1-chris@chris-wilson.co.uk

gpu: drm: bridge: sii9234: simplify getting the adapter of a client

We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608105619.593-3-wsa+renesas@sang-engineering.com

drm: Reverse lock order in pan_display_legacy()

Acquiring drm_client_dev.modeset_mutex after the locks in drm_fb_helper.dev
creates a deadlock with drm_setup_crtcs() as shown below:

  [    4.959319] fbcon: radeondrmfb (fb0) is primary device
  [    4.993952] Console: switching to colour frame buffer device 240x67
  [    4.994040]
  [    4.994041] ======================================================
  [    4.994041] WARNING: possible circular locking dependency detected
  [    4.994042] 5.2.0-rc4-1-default+ #39 Tainted: G            E
  [    4.994043] ------------------------------------------------------
  [    4.994043] systemd-udevd/369 is trying to acquire lock:
  [    4.994044] 00000000fb622acb (&client->modeset_mutex){+.+.}, at: drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper]
  [    4.994055]
  [    4.994055] but task is already holding lock:
  [    4.994055] 0000000028767ae4 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x42/0xf0 [drm]
  [    4.994072]
  [    4.994072] which lock already depends on the new lock.
  [    4.994072]
  [    4.994072]
  [    4.994072] the existing dependency chain (in reverse order) is:
  [    4.994073]
  [    4.994073] -> #3 (crtc_ww_class_mutex){+.+.}:
  [    4.994076]        lock_acquire+0x9e/0x170
  [    4.994079]        __ww_mutex_lock.constprop.18+0x97/0xf40
  [    4.994080]        ww_mutex_lock+0x30/0x90
  [    4.994091]        drm_modeset_lock+0x42/0xf0 [drm]
  [    4.994102]        drm_modeset_lock_all_ctx+0x1f/0xe0 [drm]
  [    4.994113]        drm_modeset_lock_all+0x5e/0x1a0 [drm]
  [    4.994163]        intel_modeset_init+0x60b/0xda0 [i915]
  ..
  [    4.994253]
  [    4.994253] -> #2 (crtc_ww_class_acquire){+.+.}:
  [    4.994255]        lock_acquire+0x9e/0x170
  [    4.994270]        drm_modeset_acquire_init+0xcc/0x100 [drm]
  [    4.994280]        drm_modeset_lock_all+0x44/0x1a0 [drm]
  [    4.994320]        intel_modeset_init+0x60b/0xda0 [i915]
  ..
  [    4.994403]
  [    4.994403] -> #1 (&dev->mode_config.mutex){+.+.}:
  [    4.994405]        lock_acquire+0x9e/0x170
  [    4.994408]        __mutex_lock+0x62/0x8c0
  [    4.994413]        drm_setup_crtcs+0x17c/0xc50 [drm_kms_helper]
  [    4.994418]        __drm_fb_helper_initial_config_and_unlock+0x34/0x530 [drm_kms_helper]
  [    4.994450]        radeon_fbdev_init+0x110/0x130 [radeon]
  ..
  [    4.994535]
  [    4.994535] -> #0 (&client->modeset_mutex){+.+.}:
  [    4.994537]        __lock_acquire+0xa85/0xe90
  [    4.994538]        lock_acquire+0x9e/0x170
  [    4.994540]        __mutex_lock+0x62/0x8c0
  [    4.994545]        drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper]
  [    4.994547]        fb_pan_display+0x92/0x120
  [    4.994549]        bit_update_start+0x1a/0x40
  [    4.994550]        fbcon_switch+0x392/0x580
  [    4.994552]        redraw_screen+0x12c/0x220
  [    4.994553]        do_bind_con_driver.cold.30+0xe1/0x10d
  [    4.994554]        do_take_over_console+0x113/0x190
  [    4.994555]        do_fbcon_takeover+0x58/0xb0
  [    4.994557]        notifier_call_chain+0x47/0x70
  [    4.994558]        blocking_notifier_call_chain+0x44/0x60
  [    4.994559]        register_framebuffer+0x231/0x310
  [    4.994564]        __drm_fb_helper_initial_config_and_unlock+0x2fd/0x530 [drm_kms_helper]
  [    4.994590]        radeon_fbdev_init+0x110/0x130 [radeon]
  ..

This problem was introduced in

  d81294afe drm/fb-helper: Remove drm_fb_helper_crtc

Reversing the lock ordering in pan_display_legacy() fixes the issue.

Fixes: d81294afeecd ("drm/fb-helper: Remove drm_fb_helper_crtc")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611115716.7052-1-tzimmermann@suse.de

drm/stm: dsi: add power on/off phy ops

These new physical operations are helpful to power_on/off the dsi
wrapper. If the dsi wrapper is powered in video mode, the display
controller (ltdc) register access will hang when DSI fifos are full.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-3-git-send-email-yannick.fertre@st.com

drm/bridge/synopsys: dsi: add power on/off optional phy ops

Add power on & off optional physical operation functions, helpful to
program specific registers of the DSI physical part.

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1558952499-15418-2-git-send-email-yannick.fertre@st.com

drm/rockchip: dw_hdmi: Handle suspend/resume

On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:

1. You lose the ability to detect an HDMI device being plugged in.

2. If you're using the i2c bus built in to dw_hdmi then it stops
working.

Let's call the core dw-hdmi's suspend/resume functions to restore
things.

NOTE: in downstream Chrome OS (based on kernel 3.14) we used the
"late/early" versions of suspend/resume because we found that the VOP
was sometimes resuming before dw_hdmi and then calling into us before
we were fully resumed.  For now I have gone back to the normal
suspend/resume because I can't reproduce the problems.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-2-dianders@chromium.org

drm: bridge: dw-hdmi: Add hook for resume

On Rockchip rk3288-based Chromebooks when you do a suspend/resume
cycle:

1. You lose the ability to detect an HDMI device being plugged in.

2. If you're using the i2c bus built in to dw_hdmi then it stops
working.

Let's add a hook to the core dw-hdmi driver so that we can call it in
dw_hdmi-rockchip in the next commit.

NOTE: the exact set of steps I've done here in resume come from
looking at the normal dw_hdmi init sequence in upstream Linux plus the
sequence that we did in downstream Chrome OS 3.14.  Testing show that
it seems to work, but if an extra step is needed or something here is
not needed we could improve it.

As part of this change we'll refactor the hardware init bits of
dw-hdmi to happen all in one function and all at the same time.  Since
we need to init the interrupt mutes before we request the IRQ, this
means moving the hardware init earlier in the function, but there
should be no problems with that.  Also as part of this we now
unconditionally init the "i2c" parts of dw-hdmi, but again that ought
to be fine.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604204207.168085-1-dianders@chromium.org

drm/fb: document dirty helper better

Apparently little known fact that there's no need to hand-roll your own
anymore. Cc'ing a bunch of driver people who might want to know this
too.

v2: s/none/known/ (Chris Wilson)

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Lechner <david@lechnology.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611112859.16375-1-daniel.vetter@ffwll.ch

drm/todo: Add bootsplash entry

Ease entry for anyone wanting to pick up the bootsplash work by providing
a couple of pointers.

v2: Add Sam as contact (Sam)

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-6-noralf@tronnes.org

drm/fb-helper: Move out modeset config code

No functional changes, just moving code as-is and fixing includes.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-4-noralf@tronnes.org

drm/fb-helper: Prepare to move out modeset config code

This prepares the modeset code so it can be moved out as-is in the next
patch.

v3: Remove stray newline

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-3-noralf@tronnes.org

drm/fb-helper: Remove drm_fb_helper_connector

All drivers add all their connectors so there's no need to keep around an
array of available connectors. Instead we just put the useable (not
writeback) connectors in a temporary array using
drm_client_for_each_connector_iter() everytime we probe the outputs.
Other places where it's necessary to look at the connectors, we just
iterate over them using the same iterator function.

Rename functions which signature is changed since they will be moved to
drm_client in a later patch.

v6: Improve commit message (Sam Ravnborg)

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608152657.36613-2-noralf@tronnes.org

Merge tag 'omapdrm-5.3' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 5.3

- Add support for DSI command mode displays

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a709f57d-6909-8550-3932-d84e0b5bc3ef@ti.com

Merge tag 'du-next-20190608-2' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU changes for v5.3:

- R8A774A1 SoC support
- LVDS dual-link mode support
- Support for additional formats
- Misc fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608134652.GE4786@pendragon.ideasonboard.com

drm/virtio: Add memory barriers for capset cache.

After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/amd: drop use of drmP.h in remaining files

With this commit drm/amd/ has no longer any uses of
the deprecated drmP.h header file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-11-sam@ravnborg.org

drm/amd: drop use of drmP.h in amdgpu/amdgpu*

Drop use of drmP.h in all files named amdgpu*
in drm/amd/amdgpu/

Fix fallout.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-10-sam@ravnborg.org

drm/amd: drop use of drmP.h in display/

Drop all uses of drmP.h in drm/amd/display/.
Fix fallout.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-9-sam@ravnborg.org

drm/amd: drop use of drmP.h in powerplay/

Delete the only include of drmP.h in powerplay/.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-8-sam@ravnborg.org

drm/amd: drop use of drmP.h from all header files

Drop use of the deprecated drmP.h header file from
all amd header files.
This makes it a more smooth process to get rid of drmP.h
in the .c files.

Added include files and forwards as appropriate.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-7-sam@ravnborg.org

drm/amd: drop use of drmP.h in atom.h

Drop use of the deprecated drmP.h header from atom.h

Fix fallout in various files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-6-sam@ravnborg.org

drm/amd: drop use of drmP.h in amdgpu.h

Delete the unused drmP.h from amdgpu.h.
Fix fallout in various files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-5-sam@ravnborg.org

drm/amd: drop use of drmp.h in os_types.h

Drop use of the deprecated drmP.h from display/dc/os_types.h

Fix all fallout after this change.
Most of the fixes was adding a missing include of vmalloc.h.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org

drm/amd: drop dependencies on drm_os_linux.h

Fix so no files in drm/amd/ depends on the
deprecated drm_os_linux.h header file.

It was done manually:
- remove drm_os_linux.h from drmP.h
- fix all build errros

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-3-sam@ravnborg.org

drm: fix build errors with drm_print.h

drm_print.h requires <drm/drm.h> to fix build when macros are used.
Pull in the header file in drm_print.h so users do not have to do it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-2-sam@ravnborg.org

drm/radeon: drop use of drmP.h (2/2)

Drop use of drmP.h in remaining .c files.
To ease review a little the drmP.h removal was divided in two commits.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-8-sam@ravnborg.org

drm/radeon: drop use of drmP.h (1/2)

Drop use of drmP.h in all .c files named radeon*c.
To ease review a little drmP.h removal was divided in two commits.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-7-sam@ravnborg.org

drm/radeon: prepare header files for drmP.h removal

While removing drmP.h from all .c files the list of
header files are also sorted alphabetically.
To allow this adjust the header files to pull in
the dependencies they needed to allow this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-6-sam@ravnborg.org

drm/radeon: drop drmP.h from header files

To ease conversion of .c files drop include of
drmP.h from all header files.
And fix-up build errors caused by this.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-5-sam@ravnborg.org

drm/radeon: drop dependency on drm_os_linux.h

The drm_os_linux.h header file is deprecated.
Drop all uses of symbols from this file.
All macros are just opencoded.
A few adjustments to include files was required as the obsolete
drm_os_linux.h included these headers.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-4-sam@ravnborg.org

drm: drm_debugfs.h self-contained

While removing drmP.h from drm/radeon a few files ended
up including drm_debugfs.h as the first file.
This failed build due to missing dependencies in drm_debugfs.h.

Add the missing include files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-3-sam@ravnborg.org

drm: drm_crtc.h self-contained

While removing drmP.h from drm/radeon a few files ended
up including drm_crtc.h as the first file.
This failed build due to a missing dependency in drm_crtc.h.

Add the missing include file.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190608080241.4958-2-sam@ravnborg.org

drm/bridge/synopsys: dw-hdmi: Fix unwedge crash when no pinctrl entries

In commit 50f9495efe30 ("drm/bridge/synopsys: dw-hdmi: Add "unwedge"
for ddc bus") I stupidly used IS_ERR() to check for whether we have an
"unwedge" pinctrl state even though on most flows through the driver
the unwedge state will just be NULL.

Fix it so that we consistently use NULL for no unwedge state.

Fixes: 50f9495efe30 ("drm/bridge/synopsys: dw-hdmi: Add "unwedge" for ddc bus")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610175234.196844-1-dianders@chromium.org

drm/omap: add support for manually updated displays

This adds the required infrastructure for manually updated displays,
such as DSI command mode panels. While those panels often support
partial updates we currently always do a full refresh.

The display will be refreshed when something calls the dirty callback,
such as libdrm's drmModeDirtyFB(). This is currently being done at least
by the kernel console and Xorg (with modesetting driver) in their
default configuration. Weston does not implement this and the fbdev
backend does not work (display will not update). Weston's DRM backend
uses double buffering and the page flip will also trigger a display
refresh.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: add framedone interrupt support

This prepares framedone interrupt handling for
manual display update support.

Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: don't check dispc timings for DSI

While most display types only forward their VM to the DISPC, this
is not true for DSI. DSI calculates the VM for DISPC based on its
own, but it's not identical. Actually the DSI VM is not even a valid
DISPC VM making this check fail. Let's restore the old behaviour
and avoid checking the DISPC VM for DSI here.

Fixes: 7c27fa57ef31 ("drm/omap: Call dispc timings check operation directly")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: use DRM_DEBUG_DRIVER instead of CORE

This macro is only used by omapdrm, which should print
debug messages using the DRIVER category instead of the
default CORE category.

Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Use dev_get_drvdata()

Using dev_get_drvdata directly.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: remove open-coded drm_invalid_op()

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: Make sure device_id tables are NULL terminated

Make sure (of/i2c/platform)_device_id tables are NULL terminated.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>