Hauke Mehrtens [Fri, 2 Aug 2013 16:51:47 +0000 (16:51 +0000)]
kernel: add missing config option
SVN-Revision: 37657
Hauke Mehrtens [Fri, 2 Aug 2013 16:16:23 +0000 (16:16 +0000)]
kernel: add missing config option
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37656
Hauke Mehrtens [Fri, 2 Aug 2013 15:44:04 +0000 (15:44 +0000)]
broadcom-diag: add support for the ASUS RT-N12
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37655
Hauke Mehrtens [Fri, 2 Aug 2013 15:06:14 +0000 (15:06 +0000)]
broadcom-diag: increase version number
There are some changes in there and this should be rebuild.
SVN-Revision: 37654
Felix Fietkau [Fri, 2 Aug 2013 10:02:35 +0000 (10:02 +0000)]
mac80211: backport a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37653
Jonas Gorski [Thu, 1 Aug 2013 23:04:42 +0000 (23:04 +0000)]
kernel: ocf: add missing kernel dependencies
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher,
so let it select these through kernel config.
Fixes the following build error:
ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37652
Hauke Mehrtens [Thu, 1 Aug 2013 22:19:19 +0000 (22:19 +0000)]
kernel: load libphy before tg3
SVN-Revision: 37651
Hauke Mehrtens [Thu, 1 Aug 2013 21:01:59 +0000 (21:01 +0000)]
brcm47xx: switch to kernel 3.10.4
This uses a new switch driver.
The old ADMTEK Adm6996 switch is not supported any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37650
Hauke Mehrtens [Thu, 1 Aug 2013 20:47:55 +0000 (20:47 +0000)]
brcm47xx: use lib phy when tg3 is in use
This is untested, but probably needed to make it work with the phy lib switch driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37649
Hauke Mehrtens [Thu, 1 Aug 2013 20:46:56 +0000 (20:46 +0000)]
kernel: b53: use devm_gpio_request_one() to request gpio
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37648
Hauke Mehrtens [Thu, 1 Aug 2013 19:33:59 +0000 (19:33 +0000)]
brcm47xx: improve detection of Linksys WRTSL54GS
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
Hauke Mehrtens [Thu, 1 Aug 2013 19:17:51 +0000 (19:17 +0000)]
brcm47xx: remove support for kernel 3.9
This is not needed any more.
SVN-Revision: 37646
Hauke Mehrtens [Thu, 1 Aug 2013 19:05:34 +0000 (19:05 +0000)]
kernel: b53: add support for GPIO reset
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37645
Hauke Mehrtens [Thu, 1 Aug 2013 19:04:12 +0000 (19:04 +0000)]
brcm47xx: add function to get a gpio pin by name
bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based
on configuration data in nvram.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37644
John Crispin [Thu, 1 Aug 2013 14:31:28 +0000 (14:31 +0000)]
gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions. At leat 1 button is in pressed state
in any of those positions. Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37643
John Crispin [Thu, 1 Aug 2013 14:31:24 +0000 (14:31 +0000)]
gpio-button-hotplug: use gpio_button_get_value() to fetch state.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37642
John Crispin [Thu, 1 Aug 2013 14:31:20 +0000 (14:31 +0000)]
gpio-button-hotplug: add inline function gpio_button_get_value().
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37641
John Crispin [Thu, 1 Aug 2013 14:31:15 +0000 (14:31 +0000)]
ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37640
John Crispin [Thu, 1 Aug 2013 14:31:09 +0000 (14:31 +0000)]
ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37639
John Crispin [Thu, 1 Aug 2013 14:31:04 +0000 (14:31 +0000)]
ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37638
John Crispin [Thu, 1 Aug 2013 14:30:58 +0000 (14:30 +0000)]
ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37637
John Crispin [Thu, 1 Aug 2013 14:30:53 +0000 (14:30 +0000)]
ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37636
John Crispin [Thu, 1 Aug 2013 14:30:46 +0000 (14:30 +0000)]
ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.
Support for Poray devices was worked on by:
Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37635
John Crispin [Thu, 1 Aug 2013 14:30:40 +0000 (14:30 +0000)]
lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37634
John Crispin [Thu, 1 Aug 2013 14:30:33 +0000 (14:30 +0000)]
ralink: add mt7620a_mt7610e profile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37633
Zoltan Herpai [Thu, 1 Aug 2013 09:36:37 +0000 (09:36 +0000)]
imx23: add lradc support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37632
Zoltan Herpai [Thu, 1 Aug 2013 06:58:08 +0000 (06:58 +0000)]
kernel: add missing iio config symbols for 3.10
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37631
Felix Fietkau [Wed, 31 Jul 2013 22:07:13 +0000 (22:07 +0000)]
libubox: update to the latest version, fixes a fd deletion race condition in uloop
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37629
Felix Fietkau [Wed, 31 Jul 2013 22:07:09 +0000 (22:07 +0000)]
uhttpd: update to the latest version, fixes a crash on early cgi/lua process termination
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37628
Jo-Philipp Wich [Wed, 31 Jul 2013 18:11:55 +0000 (18:11 +0000)]
base-files: implement -l (--list-backup) sysupgrade parameter to list the files that would be backed up
SVN-Revision: 37627
Hauke Mehrtens [Wed, 31 Jul 2013 17:42:55 +0000 (17:42 +0000)]
broadcom-wl: fix compile error with kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37626
Hauke Mehrtens [Wed, 31 Jul 2013 17:41:52 +0000 (17:41 +0000)]
brcm47xx: run mtd fixtrx linux every time
With this patch it is possible to boot a device with kernel 3.10 a second time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37625
Jo-Philipp Wich [Wed, 31 Jul 2013 14:10:34 +0000 (14:10 +0000)]
base-files: abort sysupgrade if file specified with --restore-config is not found
SVN-Revision: 37624
Jo-Philipp Wich [Wed, 31 Jul 2013 10:44:50 +0000 (10:44 +0000)]
ubox: update to git head
- fixes extroot tag file corruption with long uuids
SVN-Revision: 37623
Zoltan Herpai [Wed, 31 Jul 2013 09:52:46 +0000 (09:52 +0000)]
imx23: add SoC sound support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37622
Felix Fietkau [Wed, 31 Jul 2013 08:54:56 +0000 (08:54 +0000)]
gcc: merge a bugfix for a MIPS specific internal compiler error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37621
Jo-Philipp Wich [Tue, 30 Jul 2013 16:42:05 +0000 (16:42 +0000)]
base-files: implement -T (--test) sysupgrade parameter to verify image without actually flashing it
SVN-Revision: 37620
Felix Fietkau [Tue, 30 Jul 2013 08:00:25 +0000 (08:00 +0000)]
kernel: update remaning platforms accidentally left out of r37617
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37619
Felix Fietkau [Mon, 29 Jul 2013 22:45:57 +0000 (22:45 +0000)]
mac80211: rt2x00: add missing of.h header
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37618
Felix Fietkau [Mon, 29 Jul 2013 22:42:22 +0000 (22:42 +0000)]
kernel: update to linux 3.10.4, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37617
Felix Fietkau [Mon, 29 Jul 2013 19:44:05 +0000 (19:44 +0000)]
ath9k: fix several issues in the tx queueing rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37616
John Crispin [Mon, 29 Jul 2013 13:10:42 +0000 (13:10 +0000)]
lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37612
John Crispin [Mon, 29 Jul 2013 13:10:37 +0000 (13:10 +0000)]
lantiq: add gphy pinmux definitions
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37611
John Crispin [Mon, 29 Jul 2013 13:10:32 +0000 (13:10 +0000)]
lantiq: set sane default for phy leds
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37610
John Crispin [Mon, 29 Jul 2013 13:10:26 +0000 (13:10 +0000)]
ramips: fix indenting of spi partitions inside dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37609
John Crispin [Mon, 29 Jul 2013 13:10:12 +0000 (13:10 +0000)]
mac80211: rt2x00: fix default register settings for rt5350
Comparing the RTSDK driver and mac80211 revealed, that this register needs
to have a special setup on rt5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37608
John Crispin [Mon, 29 Jul 2013 13:09:16 +0000 (13:09 +0000)]
mac80211: rt2x00: enable setting wifi led polarity from OF
This patch enables setting the wifi led polarity from OF.
It can be used in a DTS' wmac section like this:
ralink,led-polarity = <1>;
Valid values are 0 or 1.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37607
Felix Fietkau [Mon, 29 Jul 2013 12:49:04 +0000 (12:49 +0000)]
libubox: update to latest version, adds extra sanity checks to blob/blobmsg iterator macros
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37604
Felix Fietkau [Mon, 29 Jul 2013 12:49:01 +0000 (12:49 +0000)]
rt2x00: merge fix for queue stopping
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37603
Felix Fietkau [Mon, 29 Jul 2013 12:48:57 +0000 (12:48 +0000)]
kernel: add missing config symbols for 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37602
Felix Fietkau [Mon, 29 Jul 2013 10:11:07 +0000 (10:11 +0000)]
gcc: add a bugfix for an internal compiler error on mips64
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37601
Felix Fietkau [Mon, 29 Jul 2013 09:38:29 +0000 (09:38 +0000)]
build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37600
Felix Fietkau [Mon, 29 Jul 2013 09:38:24 +0000 (09:38 +0000)]
tools: make padjffs2 depend on findutils
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37599
Felix Fietkau [Mon, 29 Jul 2013 09:38:21 +0000 (09:38 +0000)]
kernel: stop patching -funit-at-a-time into CFLAGS, it has no effect on recent compilers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37598
Felix Fietkau [Mon, 29 Jul 2013 09:38:08 +0000 (09:38 +0000)]
mac80211: add support for verbose builds using V=sc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37597
Luka Perkov [Sun, 28 Jul 2013 23:27:35 +0000 (23:27 +0000)]
iproute2: update to 3.10.0
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37590
Luka Perkov [Sun, 28 Jul 2013 23:27:34 +0000 (23:27 +0000)]
zlib: update to 1.2.8
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37589
Luka Perkov [Sun, 28 Jul 2013 23:27:29 +0000 (23:27 +0000)]
e2fsprogs: update to 1.42.8 and add e4defrag
Signed-off-by: Peter Wagner <tripolar@gmx.at>
SVN-Revision: 37588
Hauke Mehrtens [Sun, 28 Jul 2013 22:14:55 +0000 (22:14 +0000)]
bcm53xx: compile b53 switch driver
SVN-Revision: 37587
Hauke Mehrtens [Sun, 28 Jul 2013 22:13:52 +0000 (22:13 +0000)]
bcm53xx: update patches
This reorders the patchs and adds some new ones.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37586
Hauke Mehrtens [Sun, 28 Jul 2013 21:22:50 +0000 (21:22 +0000)]
bcm53xx: use clocksource patch as it was committed upstream
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37585
Hauke Mehrtens [Sun, 28 Jul 2013 21:20:15 +0000 (21:20 +0000)]
bcm53xx: add initial bgmac patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37584
Hauke Mehrtens [Sun, 28 Jul 2013 21:10:42 +0000 (21:10 +0000)]
bcm53xx: activate pci and usb in kernel config
This is not working, just compiling
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37583
Luka Perkov [Sun, 28 Jul 2013 20:34:21 +0000 (20:34 +0000)]
imx6: update default packages
SVN-Revision: 37582
Luka Perkov [Sun, 28 Jul 2013 20:34:19 +0000 (20:34 +0000)]
imx6: add support for EHCI USB
SVN-Revision: 37581
Luka Perkov [Sun, 28 Jul 2013 20:34:18 +0000 (20:34 +0000)]
kernel: add usb-mxs-phy package
SVN-Revision: 37580
Luka Perkov [Sun, 28 Jul 2013 20:34:17 +0000 (20:34 +0000)]
kernel: update usb-chipidea package
SVN-Revision: 37579
Luka Perkov [Sun, 28 Jul 2013 20:34:09 +0000 (20:34 +0000)]
kernel: update usb2 package
SVN-Revision: 37578
Gabor Juhos [Sun, 28 Jul 2013 10:23:38 +0000 (10:23 +0000)]
ar71xx: add profile and build image for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37577
Gabor Juhos [Sun, 28 Jul 2013 10:23:37 +0000 (10:23 +0000)]
ar71xx: add user-space support for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37576
Gabor Juhos [Sun, 28 Jul 2013 10:23:36 +0000 (10:23 +0000)]
ar71xx: add kernel support for the Netgear WNR612 v2 board
Netgear WNR612 v2:
- cpu Atheros AR7240 (Python) @400MHz
- flash 4MB
- ram 32MB
- ethernet 10/100: 1xwan + 2xlan (only two)
- radio AR9285
[juhosg: use a separate kernel patch]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37575
Gabor Juhos [Sun, 28 Jul 2013 10:23:34 +0000 (10:23 +0000)]
ar71xx: add profile and build image for the TL-WR710N board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37574
Gabor Juhos [Sun, 28 Jul 2013 10:23:33 +0000 (10:23 +0000)]
ar71xx: add user-space support for the TL-WR710N board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37573
Gabor Juhos [Sun, 28 Jul 2013 10:23:32 +0000 (10:23 +0000)]
ar71xx: add kernel support for the TP-LINK TL-WR710N v1 board
Small router sold in EU: AR9330@400MHz, 1x USB2.0,
2x ethernet, 8MB flash, 32MB ram, one led, one button.
See: http://galeria.tech-blog.pl/TP-Link_TL-WR710N-EU/
[juhosg: use a separate kernel patch]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3873/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37572
Gabor Juhos [Sun, 28 Jul 2013 10:23:31 +0000 (10:23 +0000)]
ar71xx: build image for the MERCURY MW4530R board
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37571
Gabor Juhos [Sun, 28 Jul 2013 10:23:29 +0000 (10:23 +0000)]
ar71xx: add model detection for the MERCURY MW4530R board
Mercury MW4530R is a TP-Link TL-WDR4310 clone but
with a much lower price tag (~ $40). This patch
is tested to work at trunk r37525.
Signed-off-by: Leon Xu <ylxu72@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3856/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37570
Gabor Juhos [Sun, 28 Jul 2013 10:23:22 +0000 (10:23 +0000)]
ar71xx: TEW632BRP has buttons 'active low', fix board config
Looks like trunk@37090 has changed the logic that determines
if router's button was pressed. This resulted in TEW632BRP
always booting into failsafe mode because it detected pressed
button (which was not pressed).
Measure with voltmeter has shown that buttons on this router
are actually active-low. This patch reflects this fact in
board configuration and fixes 'load info failsafe mode' issue.
Note: it looks like Trendnet TEW632BRP and a close relative
to TEW-652BRP V1.0 and D-Link DIR-615C1, so same problem may
exist on those routers as well. This patch doesn't affect
routers other than 632BRP and unfortunately I do not have
hardware to test this issue with other routers.
This patch fixes #13893 and is tested on actuall Trendnet
TEW632BRP.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37569
John Crispin [Sat, 27 Jul 2013 09:23:52 +0000 (09:23 +0000)]
ramips: add MPR-A1 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37568
John Crispin [Sat, 27 Jul 2013 09:23:45 +0000 (09:23 +0000)]
ralink: gpio driver should not set gpio to input when irq is querired
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37567
John Crispin [Sat, 27 Jul 2013 09:23:40 +0000 (09:23 +0000)]
ramips: add back dwc_otg driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37566
John Crispin [Sat, 27 Jul 2013 09:23:34 +0000 (09:23 +0000)]
ramips: MPR-A2 should use memory auto detection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37565
John Crispin [Sat, 27 Jul 2013 09:23:29 +0000 (09:23 +0000)]
ramips: enable usb phy support on rt5350
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37564
John Crispin [Sat, 27 Jul 2013 09:23:24 +0000 (09:23 +0000)]
ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37563
John Crispin [Sat, 27 Jul 2013 09:23:18 +0000 (09:23 +0000)]
strict_strtoul is obsolete, use kstrtoul instead
based on http://patchwork.openwrt.org/patch/3827/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37562
John Crispin [Fri, 26 Jul 2013 15:19:19 +0000 (15:19 +0000)]
ramips: unbreak asiarf dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37561
Felix Fietkau [Fri, 26 Jul 2013 12:35:22 +0000 (12:35 +0000)]
openvpn: update to 2.3.2
this patches updates openvpn to v2.3.2
and adds a PKG_MD5SUM to the Makefile
This release fixes a memory access violation when cipher none is used
on ar71xx - at least with my config
Signed-off-by: Peter Wagner <tripolar@gmx.at>
SVN-Revision: 37560
Steven Barth [Fri, 26 Jul 2013 11:59:25 +0000 (11:59 +0000)]
6relayd: Overridden DNS should affect DHCPv6
SVN-Revision: 37558
Felix Fietkau [Fri, 26 Jul 2013 10:03:07 +0000 (10:03 +0000)]
uhttpd: update to latest version, fixes issues with POST and keep-alive (#13940)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37556
Felix Fietkau [Fri, 26 Jul 2013 10:03:03 +0000 (10:03 +0000)]
authsae: add myself as a maintainer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37555
Felix Fietkau [Fri, 26 Jul 2013 10:02:59 +0000 (10:02 +0000)]
authsae: adapt uci scripts to use authsae
This patch modifies the uci scripts to be able to
start meshd-nl80211 for encrypted mesh networks,
therefor a new script (authsae.sh) is inserted.
Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
[etienne.champetier@free.fr: just update mac80211.sh path]
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 37554
Felix Fietkau [Fri, 26 Jul 2013 10:02:55 +0000 (10:02 +0000)]
authsae 80211s authentication daemon
This patch adds authsae open80211s authentication daemon (http://open80211s.org)
It's a rework of Peter Naulls patch (http://patchwork.openwrt.org/patch/1350/)
I've excluded the sample conf file as it's useless when used with mac80211.sh (Emanuel Taube patch)
It now link against libnl-tiny instead of libnl (patch merged in authsae git)
Authsae is 58 Ko (OPENSSL_WITH_EC option adds 35Ko to libopenssl)
Signed-off-by: Peter Naulls <peter@chocky.org>
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 37553
Felix Fietkau [Fri, 26 Jul 2013 10:02:51 +0000 (10:02 +0000)]
libconfig: add from /packages, update to latest version, add myself as maintainer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37552
Jo-Philipp Wich [Fri, 26 Jul 2013 09:09:05 +0000 (09:09 +0000)]
ubox: update to git head
- discard vfat labels with only spaces
- support using swap files
- support extroot when required kmods and block-mount are installed on jffs2
SVN-Revision: 37551
Gabor Juhos [Fri, 26 Jul 2013 07:32:01 +0000 (07:32 +0000)]
ar71xx: add profile and fixup image generation for the TL-MR10U board
Create a separate board profile and update the profile
name in image/makefile. Also use the correct machtype
string in kernel command line.
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/
40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37550
Gabor Juhos [Fri, 26 Jul 2013 07:32:00 +0000 (07:32 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/
40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37549
Gabor Juhos [Fri, 26 Jul 2013 07:31:59 +0000 (07:31 +0000)]
ar71xx: add user-space support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/
40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37548
Gabor Juhos [Fri, 26 Jul 2013 07:31:57 +0000 (07:31 +0000)]
ar71xx: add kernel support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/
40050677370
[juhosg: extend WR703N code to handle the TL-MR10U
instead of adding a separate mach-tl-mr10u file]]
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37547
Gabor Juhos [Fri, 26 Jul 2013 07:19:58 +0000 (07:19 +0000)]
kernel: update 3.10 to 3.10.3
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37546
Luka Perkov [Fri, 26 Jul 2013 01:09:50 +0000 (01:09 +0000)]
kernel: be consistent with formatting style
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37545
John Crispin [Thu, 25 Jul 2013 20:54:51 +0000 (20:54 +0000)]
lantiq: remove stale phy register setup properties from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37544
projects / openwrt / staging / stintel.git / log