drm/sun4i: Fix DE2 mixer size

DE2 mixer is always 0x6000 bytes in size on all known SoCs.

While at it, introduce a macro for that.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-11-jernej.skrabec@siol.net

drm/sun4i: Rework DE2 register defines

Most, if not all, registers found in DE2 still exists in DE3. However,
units are on different base addresses.

To prepare for addition of DE3 support, registers macros are reworked so
they take base address as parameter.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[rebased]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-10-jernej.skrabec@siol.net

dt-bindings: display: sun4i-drm: Add H6 display engine compatibles

This commit adds compatibles used in H6 display pipeline, namely for
display engine, mixer and TV TCON.

H6 display engine is somewhat similar to R40, just less TCONs and
mixer support more features.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-8-jernej.skrabec@siol.net

dt-bindings: bus: add H6 DE3 bus binding

The Allwinner H6 DE3 bus is similar to the A64 DE2 one.

Add its compatible string with the A64 string as fallback to the
binding.

Some description of the binding is modified to make it more generic.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[Fixed compatible name]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-2-jernej.skrabec@siol.net

drm/lease: drop EXPORT_SYMBOL

Leases are entirely implemented within drm.ko, no need to even tempt
drivers into doing nasty things. And if there's really a need, we can
always re-export these again.

Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102143107.25722-1-daniel.vetter@ffwll.ch

drm/selftests: Fix build warning -Wframe-larger-than

It seems for some random configuration drm_device is bigger than 2048
bytes.
The fix is to make the mock objects static variables.

Bug reported by 0-DAY Kernel test infrastructure here:
https://lists.01.org/pipermail/kbuild-all/2018-November/054431.html

Fixes: 6ff3d9ffdcbb ("drm/selftests: Add tests for drm_internal_framebuffer_create")
Signed-off-by: Alexandru-Cosmin Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102130103.7753-1-alexandru-cosmin.gheorghe@arm.com

drm/selftests: Add tests for drm_internal_framebuffer_create

Add tests that verify that drm_internal_framebuffer_create creates
buffers correctly by creating a dummy drm_device with a mock function
for the fb_create callback.

To decide if a buffer has been created or not it just checks if
fb_create callback has been called for the particular drm_mode_fb_cmd2
that's being tested.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-8-alexandru-cosmin.gheorghe@arm.com

drm: Add macro to export functions only when CONFIG_DRM_DEBUG_SELFTEST is enabled

If we want to be able to write drmselftests for non-static core
functions that are not intended to be used by drivers we need this
functions to be exported.

This adds a macro that is tied of CONFIG_DRM_DEBUG_SELFTEST, and uses
that to export drm_internal_framebuffer_create, in order for
subsequent patches to be able to test it.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-7-alexandru-cosmin.gheorghe@arm.com

drm/selftests: Add tests for drm_format_info* helpers

Add selftests for the following newly added functions:
 - drm_format_info_block_width
 - drm_format_info_block_height
 - drm_format_info_min_pitch

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-6-alexandru-cosmin.gheorghe@arm.com

drm: Extend framebuffer_check to handle formats with cpp/char_per_block 0

For formats that are supported only with non-linear modifiers it
doesn't make to much sense to define cpp or char_per_block, so that
will be set to 0.

This patch adds a restriction to force having a modifier attached when
cpp/char_per_block is 0, and to bypass checking the pitch restriction.

This had been discussed here.
[1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&highlight_names=&date=2018-09-13&show_html=true

Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-5-alexandru-cosmin.gheorghe@arm.com

drm: mali-dp: Enable Mali-DP tiled buffer formats

Enable the following formats
- DRM_FORMAT_X0L0: DP650
- DRM_FORMAT_X0L2: DP550, DP650

Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-4-alexandru-cosmin.gheorghe@arm.com

drm/fourcc: Add fourcc for Mali linear tiled formats

Mali-DP implements a number of tiled yuv formats which are not
currently described in drm_fourcc.h.
This adds those definitions and describes their memory layout by
using the newly added char_per_block, block_w, block_h.

Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151051.1509-3-alexandru-cosmin.gheorghe@arm.com

drm/fourcc: Add char_per_block, block_w and block_h in drm_format_info

For some pixel formats .cpp structure in drm_format info it's not
enough to describe the peculiarities of the pixel layout, for example
tiled formats or packed formats at bit level.

What's implemented here is to add three new members to drm_format_info
that could describe such formats:

- char_per_block[3]
- block_w[3]
- block_h[3]

char_per_block will be put in a union alongside cpp, for transparent
compatibility  with the existing format descriptions.

Regarding, block_w and block_h they are intended to be used through
their equivalent getters drm_format_info_block_width /
drm_format_info_block_height, the reason of the getters is to abstract
the fact that for normal formats block_w and block_h will be unset/0,
but the methods will be returning 1.

Additionally, convenience function drm_format_info_min_pitch had been
added that computes the minimum required pitch for a given pixel
format and buffer width.

Using that the following drm core functions had been updated to
generically handle both block and non-block formats:

- drm_fb_cma_get_gem_addr: for block formats it will just return the
  beginning of the block.
- framebuffer_check: Use the newly added drm_format_info_min_pitch.
- drm_gem_fb_create_with_funcs: Use the newly added
  drm_format_info_min_pitch.
- In places where is not expecting to handle block formats, like fbdev
  helpers I just added some warnings in case the block width/height
  are greater than 1.

Changes since v3:
 - Add helper function for computing the minimum required pitch.
 - Improve/cleanup documentation

Changes since v8:
 - Fixed build on 32bits arm architectures, with:

-       return DIV_ROUND_UP((u64)buffer_width * info->char_per_block[plane],
+       return DIV_ROUND_UP_ULL((u64)buffer_width * info->char_per_block[plane],

Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101170055.5433-1-alexandru-cosmin.gheorghe@arm.com

drm/panel: Add simple panel mode for the ARM RTSM

Having failed any attempts at a more generic solution,
I fall back to the very specific solution: define a simple
panel for the ARM RTSM emulated platforms.

I am doing this so we can convert all old users from the
previous fbdev driver to the PL111 DRM driver.

This works fine as far as I can test, provided the
device tree for RTSM AEMv8 is augmented accordingly.

Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Mali DP Maintainers <malidp@foss.arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026111334.3365-1-linus.walleij@linaro.org

drm: Remove 80-column line in drm_mode_object.c

Break line after NULL to decrease the line size.

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031174424.odljb6obj25wm47d@smtp.gmail.com

drm/tilcdc: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-9-noralf@tronnes.org

drm/sun4i: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-8-noralf@tronnes.org

drm/atmel-hlcdc: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-7-noralf@tronnes.org

drm/fsl-dcu: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-3-noralf@tronnes.org

drm/arc: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025201340.34227-2-noralf@tronnes.org

drm/syncobj: Mark local add/remove callback functions as static

drivers/gpu/drm/drm_syncobj.c:181:6: warning: no previous prototype for ‘drm_syncobj_add_callback’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_syncobj.c:190:6: warning: no previous prototype for ‘drm_syncobj_remove_callback’ [-Wmissing-prototypes]

Fixing that leads to

drivers/gpu/drm/drm_syncobj.c:181:13: warning: ‘drm_syncobj_add_callback’ defined but not used [-Wunused-function]

so remove the unused drm_syncobj_add_callback() entirely.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031120710.21582-1-chris@chris-wilson.co.uk
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

drm/tinydrm: Fix setting of the column/page end addresses.

If the clipped dirty region's x/y happened to align to 256, we would
have set the top 8 bits wrong.  Noticed by inspection, not by
reproducing a bug.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-4-eric@anholt.net
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

drm: Add an hx8367d tinydrm driver.

I want to sort out support for tinydrm in vc4, so I needed to get a
tinydrm-appropriate panel working and this is what I had on hand.
This is derived from a combination of ili9341.c from tinydrm and
fb_hx8357d.c from staging's fbtft.

v2: Write my own register defs from the spec to not need the header
    from fbtft.  Fix spi device string to enable module autoloading.
    (Suggestions by Noralf)

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-3-eric@anholt.net
Reviewed-by: Noralf Trønnes <noralf@tronnes.org> (v1)

dt-bindings: new binding for Himax HX8357D display panels

This adds a new binding for Himax HX8357D display panels. It includes
a compatible string for one display (more can be added in the future).

The YX350HV15 panel[1] is found in the Adafruit PiTFT 3.5" Touch
Screen for Raspberry Pi.

[1] https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-raspberry-pi/downloads

This binding is closely modeled after the ili9341 binding, for a
similar product from adafruit.  The primary difference is that the
hx8357d doesn't have a reset line that I can find in the schematics.

v2: Document the "reg" property (requested by Rob), fix commit message
    typo (Noralf)

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024184313.2967-2-eric@anholt.net
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>

drm/tinydrm: Advertise that we can do only DRM_FORMAT_MOD_LINEAR.

Without this, the xserver relies on what the 3D driver exposes and
assumes that the display can handle it, and then the DRM driver
happily tries to scan out a tiled format.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025162635.6689-1-eric@anholt.net
Acked-by: Noralf Trønnes <noralf@tronnes.org>

drm/bochs: add edid support.

Recent qemu (latest master branch, upcoming 3.1 release) got support
for EDID data.  This patch adds guest driver support.

EDID support in qemu is not (yet) enabled by default, so please use
'qemu -device VGA,edid=on' for testing.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181029205048.13200-1-kraxel@redhat.com

drm/rockchip: dsi: add dual mipi support

Add the Rockchip-sepcific dual-dsi setup and hook it into the VOP as well.
As described in the general dual-dsi devicetree binding, the panel should
define two input ports and point each of them to one of the used dsi-
controllers, as well as declare one of them as clock-master.
This is used to determine the dual-dsi state and get access to both
controller instances.

v6:
  handle master+slave component in dsi-attach
v5:
  use driver-internal mechanism to find dual dsi slave
v4:
  add component directly in probe when adding empty dsi slave controller

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-8-heiko@sntech.de

drm/bridge/synopsys: dsi: add dual-dsi support

Allow to also drive a slave dw-mipi-dsi controller in a dual-dsi
setup. This will require additional implementation-specific
code to look up the slave instance and do specific setup.
Also will probably need code in the specific crtcs as dual-dsi
does not equal two separate dsi outputs.

To activate, the implementation-specific code should set the slave
using dw_mipi_dsi_set_slave() before calling __dw_mipi_dsi_bind().

v2:
- expect real interface number of lanes
- keep links to both master and slave
v3:
- remove unneeded separate variables
- remove unneeded second slave settings
- disable slave before master
- lane-sum calculation comments

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-7-heiko@sntech.de

drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver

Add the ROCKCHIP DSI controller driver that uses the Synopsys DesignWare
MIPI DSI host controller bridge and remove the old separate one.

changes:

v2:
   add err_pllref, remove unnecessary encoder.enable & disable
   correct spelling mistakes
v3:
   call dw_mipi_dsi_unbind() in dw_mipi_dsi_rockchip_unbind()
   fix typo, use of_device_get_match_data(),
   change some bind() logic into probe()
   add 'dev_set_drvdata()'
v4:
  return -EINVAL when can not get best_freq
  add a clarifying comment when get vco
  add review tag
v5:
  keep our power domain enabled while touching GRF
v6:
  change func name dw_mipi_encoder_disable to
  dw_mipi_dsi_encoder_disable
v7:
  none
v8: Heiko
  add Archit's Review tag
  adapt to recent changes in the original rockchip-dsi driver
  beautify grf-handling
  split hw-setup (resources, dsi-host) from bind into probe
v2-new: Heiko
  add SPDX header instead of license blurb
  drop old versioning to not confuse people
v3-new: Heiko
  include ordering
  moved hwaccess from mode_set to enable callback
  move pllref_clk enablement to bind (needed by bridge mode_set->lane_mbps)
v4-new: Heiko
  rebase against recent rockchip-dsi changes
  move to call component_add in the new glue host-attach

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-6-heiko@sntech.de

drm/bridge/synopsys: dsi: add ability to have glue-specific attach and detach

With the regular means of adding the dsi-component in probe it creates
a race condition with the panel probing, as the panel device only gets
created after the dsi-bus got created.

When the panel-driver is build as a module it currently fails hard as the
panel cannot be probed directly:

dw_mipi_dsi_bind()
  __dw_mipi_dsi_probe()
    creates dsi bus
    creates panel device
    triggers panel module load
    panel not probed (module not loaded or panel probe slow)
  drm_bridge_attach
    fails with -EINVAL due to empty panel_bridge

Additionally the panel probing can run concurrently with dsi bringup
making it possible that the panel can already be found but dsi-attach
hasn't finished running.

To solve that cleanly we may want to only create the component after
the panel has finished probing, by calling component_add from the
host-attach dsi callback.

As that is specific to glue drivers, add a new struct for host_ops
so that glue drivers can tell the bridge to call specific functions
after the common host-attach and before the common host-detach run.

Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-4-heiko@sntech.de

drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from dw_mipi_dsi_bind

__dw_mipi_dsi_probe() does all the grabbing of resources and does it using
devm-helpers. So this is happening on each try of master bringup possibly
slowing down things a lot.

Drivers using the component framework may instead want to call
dw_mipi_dsi_probe separately in their probe function to setup resources
early. That way the dsi bus also gets created earlier and also not
recreated on each bind-try, so that attached panels can load their modules
and be probed way before the bridge-attach in the bind call.

So drop the call to __dw_mipi_dsi_probe and modify the function to take
a struct dw_mipi_dsi instead of the platform-device.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-3-heiko@sntech.de

drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to __dw_mipi_dsi_remove

Right now the host is only unregistered when the driver is used via the
bridge api and not via the component api, leading to the host staying
registered in cases like probe deferral.

So move the host unregister to the general remove function, so that it
gets cleaned up in all cases.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-2-heiko@sntech.de

drm/qxl: Use 'unsigned int' instead of 'bool'

Use 'unsigned int' with bitfield instead of 'bool' to avoid alignment
issues and remove checkpatch.pl check:

CHECK: Avoid using bool structure members because of possible alignment
issues

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fcd9d7ea7eec1ac6a3ad9ad16e0fc9ef13c089fd.1540579956.git.shayenneluzmoura@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: Add space before open parentheses

Add space to remove checkpath.pl error:

ERROR: space required before the open parenthesis '('

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1ab3ba05c140aae01bde66f73ff1f3b78bf7dfb3.1540579956.git.shayenneluzmoura@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: Use 'unsigned int' instead of 'usigned'

Use 'usigned int' instead of 'usigned' to remove the checkpath.pl warning:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/52604806eb18bc25e7e429f5b229fe8c1d271b5c.1540579956.git.shayenneluzmoura@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: Remove exceding whiteline

Remove extra whiteline to clean the checkpatch.pl check:

CHECK: Please don't use multiple blank lines

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5b95e1d4d515d02d01b829ddc5b3ca80af29e2e2.1540579956.git.shayenneluzmoura@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: Add line after variable declarations

Add whiteline after variable declarations to remove the checkpath.pl
warning:

WARNING: Missing a blank line after declarations

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a1d44c4a30f9b52d0aa7113e4e5093e843f9913b.1540579956.git.shayenneluzmoura@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: Remove trailing whitespace

Remove extra tab and space to clean the checkpath.pl error.

ERROR: trailing whitespace

Signed-off-by: Shayenne da Luz Moura <shayenneluzmoura@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/fb0e2237bc505c855a0a842c081a39d524c571dc.1540579956.git.shayenneluzmoura@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

gpu/drm/virtio/virtgpu_vq.c: Use kmem_cache_zalloc

Replaced kmem_cache_alloc + memset with kmem_cache_zalloc

Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5bc9ff7e.1c69fb81.105c2.1fef@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Handle context ID allocation errors

It is possible to run out of memory while allocating IDs.  The current
code would create a context with an invalid ID; change it to return
-ENOMEM to userspace.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-3-willy@infradead.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Replace IDRs with IDAs

These IDRs were only being used to allocate unique numbers, not to look
up pointers, so they can use the more space-efficient IDA instead.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926160031.15721-2-willy@infradead.org
[ kraxel: resolve conflict ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: fix resource id handling

Move virtio_gpu_resource_id_{get,put} to virtgpu_object.c and make them
static.  Allocate and free the id on creation and destroy, drop all
other calls.  That way objects have a valid handle for the whole
lifetime of the object.

Also fixes ids leaking.  Worst offender are dumb buffers, and I think
some error paths too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-7-kraxel@redhat.com

drm/virtio: drop resource_id argument.

We pass the obj anyway, so obj->hw_res_handle can be used instead
in virtio_gpu_object_attach() and virtio_gpu_cmd_create_resource().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-6-kraxel@redhat.com

drm/virtio: use virtio_gpu_object->hw_res_handle in virtio_gpu_resource_create_ioctl()

Drop pointless res_id variable in virtio_gpu_resource_create_ioctl(),
just use the hw_res_handle field in virtio_gpu_object directly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-5-kraxel@redhat.com

drm/virtio: use virtio_gpu_object->hw_res_handle in virtio_gpu_mode_dumb_create()

Drop pointless resid variable in virtio_gpu_mode_dumb_create(), just use
the hw_res_handle field in virtio_gpu_object directly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-4-kraxel@redhat.com

drm/virtio: use virtio_gpu_object->hw_res_handle in virtio_gpufb_create()

Drop pointless resid variable in virtio_gpufb_create(), just use
the hw_res_handle field in virtio_gpu_object directly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-3-kraxel@redhat.com

drm/virtio: track created object state

Track whenever the virtio_gpu_object is already created (i.e. host knows
about it) in a new variable.  Add checks to virtio_gpu_object_attach()
to do nothing on objects not created yet.

Make virtio_gpu_ttm_bo_destroy() use the new variable too, instead of
expecting hw_res_handle indicating the object state.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181019061847.18958-2-kraxel@redhat.com

gpu: drm/lease: fix spelling mistake, EACCESS -> EACCES

Trivial fix to a spelling mistake of the error access name EACCESS,
rename to EACCES

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026180512.4908-1-colin.king@canonical.com

drm/bridge: analogix_dp: Fix misleading indentation reported by smatch

This patch avoids that building the bridge/analogix source code with
smatch triggers complaints about inconsistent indenting. It also fixes
a typo in DRM_ERROR message, attch is replaced for attach.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016095336.15656-1-enric.balletbo@collabora.com

drm/sun4i: hdmi: Fix double flag assignation

The is_double flag is a boolean currently assigned to the value of the d
variable, that is either 1 or 2. It means that this is_double variable is
always set to true, even though the initial intent was to have it set to
true when d is 2.

Fix this.

Fixes: 9c5681011a0c ("drm/sun4i: Add HDMI support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-2-maxime.ripard@bootlin.com

drm/sun4i: hdmi: Fix unitialized variable

The is_double variable is used to store, and possibly returning to the
calling function, whether it needs to double the rate of the parent clock
or not.

In the case where it does, the variable is affected, but in the case where
it doesn't we return some uninitialized value. Fix this.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181021163446.29135-1-maxime.ripard@bootlin.com

drm/vkms: provide a parent device to drm_dev_init()

Earlier commit updated the vgem driver to improve the topology, by
passing a platform device as parent to drm_dev_init(). Shortly
afterwords we updated the core function to BUG() in order to catch any
buggy drivers passing NULL as parent.

While I missed the vkms driver (as the patch predates vkms by a few
months), the BUG caught the issue within couple of hours.

Swap the drm_dev_init <> platform_device_register_simple order, to
the driver back to life.

Fixes: f08877e79485 ("drm: BUG_ON if passing NULL parent to drm_dev_init")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak Sharma <deepak.sharma@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026100550.625-1-emil.l.velikov@gmail.com

drm/i915/hdmi: Detect HDMI 2.0 monitors using multiple EDID capabilities

HDMI 2.0 monitors may not support SCDC and still be able to accept VICs
above 63. Use multiple EDID capbilities to determine if the SINK is
actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique
EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is
not used during the test. The current HDMI AVI infoframe code only uses the
SCDC supported information in the HDMI Forum VSDB to determine if the sink
is HDMI 2.0. This patch adds a check for YCbCr420 present in the EDID
supported formats as well as the existing SCDC supported check.

HDMI 2.0 CTS HF1-51 test fails on the QD980B.

V2: Make check for display_info->color formats == YCbCR420 and SCDC

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540415073-5102-1-git-send-email-clinton.a.taylor@intel.com

dma-buf: Update reservation shared_count after adding the new fence

We need to serialise the addition of a new fence into the shared list
such that the fence is visible before we claim it is there. Otherwise a
concurrent reader of the shared fence list will see an uninitialised
fence slot before it is set.

  <4> [109.613162] general protection fault: 0000 [#1] PREEMPT SMP PTI
  <4> [109.613177] CPU: 1 PID: 1357 Comm: gem_busy Tainted: G     U            4.19.0-rc8-CI-CI_DRM_5035+ #1
  <4> [109.613189] Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
  <4> [109.613252] RIP: 0010:i915_gem_busy_ioctl+0x146/0x380 [i915]
  <4> [109.613261] Code: 0b 43 04 49 83 c6 08 4d 39 e6 89 43 04 74 6d 4d 8b 3e e8 5d 54 f4 e0 85 c0 74 0d 80 3d 08 71 1d 00 00
  0f 84 bb 00 00 00 31 c0 <49> 81 7f 08 20 3a 2c a0 75 cc 41 8b 97 50 02 00 00 49 8b 8f a8 00
  <4> [109.613283] RSP: 0018:ffffc9000044bcf8 EFLAGS: 00010246
  <4> [109.613292] RAX: 0000000000000000 RBX: ffffc9000044bdc0 RCX: 0000000000000001
  <4> [109.613302] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffffffff822474a0
  <4> [109.613311] RBP: ffffc9000044bd28 R08: ffff88021e158680 R09: 0000000000000001
  <4> [109.613321] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88021e1641b8
  <4> [109.613331] R13: 0000000000000003 R14: ffff88021e1641b0 R15: 6b6b6b6b6b6b6b6b
  <4> [109.613341] FS:  00007f9c9fc84980(0000) GS:ffff880227a40000(0000) knlGS:0000000000000000
  <4> [109.613352] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  <4> [109.613360] CR2: 00007f9c9fcb8000 CR3: 00000002247d4005 CR4: 00000000000606e0

Fixes: 27836b641c1b ("dma-buf: remove shared fence staging in reservation object")
Testcase: igt/gem_busy/close-race
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026080302.11507-1-chris@chris-wilson.co.uk

drm/syncobj: Avoid kmalloc(GFP_KERNEL) under spinlock

drivers/gpu/drm/drm_syncobj.c:202:4-14: ERROR: function drm_syncobj_find_signal_pt_for_point called on line 390 inside lock on line 389 but uses GFP_KERNEL

  Find functions that refer to GFP_KERNEL but are called with locks held.

Generated by: scripts/coccinelle/locks/call_kern.cocci

v2:
syncobj->timeline still needs protect.

v3:
use a global signaled fence instead of re-allocation.

v4:
Don't need moving lock.
Don't expose func.

v5:
rename func and directly return.

Tested by: syncobj_wait and ./deqp-vk -n dEQP-VK.*semaphore* with
lock debug kernel options enabled.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Christian König <easy2remember.chk@googlemail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
CC: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/258623/

dt-bindings: Add Truly NT35597 panel driver bindings

Add the device tree bindings for Truly NT35597 panel driver. This panel
driver supports both single DSI and dual DSI.

However, this patch series supports only dual DSI.

Changes in v10:
  - Remove active high in the documentation for mode gpio
  - Fix commmit text detail about the board and also
    fix a typo

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-2-git-send-email-abhinavk@codeaurora.org

drm/panel: Add support for Truly NT35597 panel driver

Add support for Truly NT35597 panel driver used in MSM reference
platforms. This panel driver supports both single DSI and dual
DSI modes.

However, this patch series adds support only for dual DSI mode.

Changes in v10:
- None

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-1-git-send-email-abhinavk@codeaurora.org

drm/stm: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-15-noralf@tronnes.org

drm/meson: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-6-noralf@tronnes.org

drm/virtio: document drm_dev_set_unique workaround

A while back we removed it, yet that lead to regressions. At some later
point, I've attempted to remove it again without fully grasping the
unique (pun intended) situation that virtio is in.

Add a bulky comment to document why the call should stay as-is, for the
next person who's around.

As a Tl;Dr: virtio sits on top of struct virtio_device, which confuses
dev_is_pci(), wrong info gets sent to userspace and X doesn't start.
Driver needs to explicitly call drm_dev_set_unique() to keep it working.

v2: Fix handful of typos (Laszlo)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024144252.16518-1-emil.l.velikov@gmail.com

drm: BUG_ON if passing NULL parent to drm_dev_init

Previous commit removed the only reason why we were allowing NULL as
a parent device. With that resolved, we can enforce nobody else does
that mistake.

With that we can drop the ugly drm_dev_set_unique workaround.

v2: rebase, silence checkpatch "== NULL" warning

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Deepak Sharma <deepak.sharma@amd.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-2-emil.l.velikov@gmail.com

drm/vgem: Fix vgem_init to get drm device available.

Modify vgem_init to take platform dev as parent in drm_dev_init.
This will make drm device available at "/sys/devices/platform/vgem"
in x86 chromebook.

v2: rebase, address checkpatch typo and line over 80 characters

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Deepak Sharma <deepak.sharma@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.com

dma-buf: test shared slot allocation when mutex debugging is active

Set shared_max to the number of shared fences right before we release
the lock.

This way every attempt to add a shared fence without previously
reserving a slot will cause an error.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Link: https://patchwork.kernel.org/patch/10626147/

dma-buf: allow reserving more than one shared fence slot

Let's support simultaneous submissions to multiple engines.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626149/

dma-buf: remove shared fence staging in reservation object

No need for that any more. Just replace the list when there isn't enough
room any more for the additional fence.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.kernel.org/patch/10626143/

drm: Fix doc warning in drm_connector_attach_edid_property()

Fixes the following warnings:
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:306: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'
../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property'

Fixes: 6b7e2d5c3032 ("drm: add drm_connector_attach_edid_property()")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024182442.206411-1-sean@poorly.run

drm/dp_mst: Remove all evil duplicate state pointers

There's no reason to track the atomic state three times. Unfortunately,
this is currently what we're doing, and even worse is that there is only
one actually correct state pointer: the one in mst_state->base.state.
mgr->state never seems to be used, along with the one in
mst_state->state.

This confused me for over 4 hours until I realized there was no magic
behind these pointers. So, let's save everyone else from the trouble.

Signed-off-by: Lyude Paul <lyude@redhat.com>.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-3-lyude@redhat.com

drm/dp_mst: Deprecate drm_dp_find_vcpi_slots()

Because we have drm_dp_atomic_find_vcpi_slots(), which actually takes
care to update the atomic state of the MST topology, prints valuable
debugging output, and actually takes references to the ports it's
checking! This explains some incorrect usage I've been seeing across the
tree...

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023231251.16883-2-lyude@redhat.com

Merge drm/drm-next into drm-misc-next

4.19 is out, Lyude asked for a backmerge, and it's been a while. All
very good reasons on their own :-)

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/vc4: Set ->is_yuv to false when num_planes == 1

When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.

Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.

Fixes: fc04023fafecf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com

drm/vc4: Fix X/Y positioning of planes using T_TILES modifier

X/Y positioning of T-format buffers is quite tricky and the current
implementation was failing to position a plane using this format
correctly when the CRTC X, Y or both X and Y offsets were negative.
It was also failing when the SRC X/Y offsets were != 0.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-5-boris.brezillon@bootlin.com

drm/vc4: Move ->offsets[] adjustment out of setup_clipping_and_scaling()

The offset adjustment depends on the framebuffer modified, so let's
just move this operation in the DRM_FORMAT_MOD_LINEAR case inside
vc4_plane_mode_set().

This we'll be able to fix offset calculation for
DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-4-boris.brezillon@bootlin.com

drm/vc4: Use drm_atomic_helper_check_plane_state() to simplify the logic

drm_atomic_helper_check_plane_state() takes care of checking the
scaling capabilities and calculating the clipped X/Y offsets for us.

Rely on this function instead of open-coding the logic.

Incidentally, it seems to fix a problem we had with negative X/Y
positioning of YUV planes.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-3-boris.brezillon@bootlin.com

drm/vc4: Define missing PITCH0_SINK_PIX field

This is needed to support X/Y negative placement of planes using
T-format buffers.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-2-boris.brezillon@bootlin.com

drm/vc4: Fix TILE_Y_OFFSET definitions

Y_OFFSET field starts at bit 8 not 7.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180803092231.26446-1-boris.brezillon@bootlin.com

drm/panel: Add driver for Samsung S6D16D0 panel

The Samsung S6D16D0 is a simple comman mode only DSI display
that is used on the ST-Ericsson Ux500 reference design
TVK1281618 user interface board (UIB).

Cc: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org

drm/panel: Add DT bindings for Samsung S6D16D0

This adds the device tree bindings for the Samsung S6D16D0
panel. This is a command mode only panel using DSI.

Cc: devicetree@vger.kernel.org
Cc: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-1-linus.walleij@linaro.org

drm: dsi: Add lane clock rate fields to DSI device

The DSI devices have a maximum operating frequency specified
in their data sheet per the MIPI specification, and DSI hosts
that can scale their frequency need this information to set
their clock dividers right.

As current panel drivers often lack this information, specify
that setting it to zero will make the DSI host use some
reasonable default.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023072422.25754-1-linus.walleij@linaro.org

drm/doc: Update errno handbook

We recently bikeshedded this to a different flavour, but forgot to
update the recommendations.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019084311.23836-1-daniel.vetter@ffwll.ch

drm/doc: kerneldoc for quirk_addfb_prefer_xbgr_30bpp

Shuts up warning noise.

Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-22-daniel.vetter@ffwll.ch

drm: msm: adreno: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) +PTR_ERR

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR because its
better to have inlined function rather than code-opened implementation.

Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018204815.GA23390@armorer

drm/drm_pci.c: Use dma_zalloc_coherent

Replace dma_alloc_coherent + memset with dma_zalloc_coherent.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023040222.GA1540@jordon-HP-15-Notebook-PC

DRM: UDL: get rid of useless vblank initialization

UDL doesn't support vblank functionality so we don't need to
initialize vblank here (we are able to send page flip
completion events even without vblank initialization)

Moreover current drm_vblank_init call with num_crtcs > 0 causes
sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every
time. This breaks userspace apps (for example weston) which
relies on timestamp value.

Cc: stable@vger.kernel.org
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.com

drm/rcar-du: Convert drm_atomic_helper_suspend/resume()

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

remove suspend_state field from the rcar_du_device
structure as it is no more required.

With this conversion, also drm_fbdev_cma_set_suspend_unlocked()
will left with no consumer. So this function can be removed.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180918163903.GA11172@jordon-HP-15-Notebook-PC

drm: fix deadlock of syncobj v6

v2:
add a mutex between sync_cb execution and free.
v3:
clearly separating the roles for pt_lock and cb_mutex (Chris)
v4:
the cb_mutex should be taken outside of the pt_lock around
this if() block. (Chris)
v5:
fix a corner case
v6:
tidy drm_syncobj_fence_get_or_add_callback up. (Chris)

Tested by syncobj_basic and syncobj_wait of igt.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.kernel.org/patch/10652893/

vgaarb: Keep adding VGA device in queue

If failed to find the deivice owning the boot framebuffer,
try to use the first VGA device instead of the last one.

Usually the 1st device is integrated GPU who owns the boot framebuffer.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-2-git-send-email-aaron.ma@canonical.com

vgaarb: Add support for 64-bit frame buffer address

EFI GOP uses 64-bit frame buffer address when some BIOS
disabled CSM support. vgaarb only stores lfb_base,
this will lead boot framebuffer to wrong device.

Add ext_lfb_base support to use 64-bit fb address.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1535739600-8842-1-git-send-email-aaron.ma@canonical.com

drm/selftest: Refactor test-drm_plane_helper

The idea is to split test implementations in different compilation
units, but have one single place where we define the list of tests,
in this case(drm_modeset_selftests.h).

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019105752.17741-9-alexandru-cosmin.gheorghe@arm.com

drm: fourcc: Convert drm_format_info kerneldoc to in-line member documentation

In-line member documentation seems to be desired way of documenting
structure members.

This change had been suggested by Daniel Vetter here:
https://lists.freedesktop.org/archives/dri-devel/2018-October/192176.html

Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019105752.17741-2-alexandru-cosmin.gheorghe@arm.com

drm/dp: Add definitions for eDP Rev 1.4a and 1.4b

VESA eDP 1.4 specification has separate fields defined in
EDP_DPCD_REV for eDP 1.4a and 1.4b eDP revisions.
This patch defines those. Found this when one of my eDP panels
advertises eDP 1.4a (04h) in the EDP_DPCD_REV DPCD field.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009002351.23085-1-manasi.d.navare@intel.com

Merge tag 'drm-intel-next-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637)
- Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264)
- Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338)
- MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes
- Then assorted proactive code fixes caught by CI or developers

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com

drm: sti: don't pass GFP_DMA32 to dma_alloc_wc

The DMA API does its own zone decisions based on the coherent_dma_mask.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181013151707.32210-7-hch@lst.de

drm/sti: make crct disable atomic

Wait until the next vblank to be sure that crtc has been disabled.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012094639.1585-1-benjamin.gaignard@linaro.org

drm: add syncobj timeline support v9

This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side:
This extension introduces a new type of syncobj that has an integer payload
identifying a point in a timeline. Such timeline syncobjs support the
following operations:
   * CPU query - A host operation that allows querying the payload of the
     timeline syncobj.
   * CPU wait - A host operation that allows a blocking wait for a
     timeline syncobj to reach a specified value.
   * Device wait - A device operation that allows waiting for a
     timeline syncobj to reach a specified value.
   * Device signal - A device operation that allows advancing the
     timeline syncobj to a specified value.

v1:
Since it's a timeline, that means the front time point(PT) always is signaled before the late PT.
a. signal PT design:
Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled,
the timeline will increase to value of PT[N].
b. wait PT design:
Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare
wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be
signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline,
so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to
perform that.

v2:
1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian)
2. move unexposed denitions to .c file. (Daniel Vetter)
3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian)
4. split up the change to drm_syncobj_replace_fence() in a separate patch.
5. drop the submission_fence implementation and instead use wait_event() for that. (Christian)
6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter)

v3:
1. replace normal syncobj with timeline implemenation. (Vetter and Christian)
    a. normal syncobj signal op will create a signal PT to tail of signal pt list.
    b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT.
2. many bug fix and clean up
3. stub fence moving is moved to other patch.

v4：
1. fix RB tree loop with while(node=rb_first(...)). (Christian)
2. fix syncobj lifecycle. (Christian)
3. only enable_signaling when there is wait_pt. (Christian)
4. fix timeline path issues.
5. write a timeline test in libdrm

v5: (Christian)
1. semaphore is called syncobj in kernel side.
2. don't need 'timeline' characters in some function name.
3. keep syncobj cb.

v6: (Christian)
1. merge syncobj_timeline to syncobj structure.
2. simplify some check sentences.
3. some misc change.
4. fix CTS failed issue.

v7: (Christian)
1. error handling when creating signal pt.
2. remove timeline naming in func.
3. export flags in find_fence.
4. allow reset timeline.

v8:
1. use wait_event_interruptible without timeout
2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY

v9:
1. rename signal_pt->base to signal_pt->fence_array to avoid misleading
2. improve kerneldoc

individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore*
timeline syncobj is tested by ./amdgpu_test -s 9

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: Christian Konig <christian.koenig@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Rakos <Daniel.Rakos@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/257258/

firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.

Add missing MODULE_FIRMWARE while loading DMC ICL.

v2: Add Fixes tag. (Rodrigo)
v3: Rebase by Rodrigo after commit 7fe78985cd08 ("drm/i915/csr:
 restructure CSR firmware definition macros")
v4: Rodrigo fixing his own mess on commit mentioning on v3
    comment above.

Fixes: 4445930f1c4a ("firmware/dmc/icl: load v1.07 on icelake.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com
(cherry picked from commit 00e5d8b1eb47378924f3de3435450650f426b02a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/icl: Fix signal_levels

Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.

Fixes: fb5c8e9d4350 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
(cherry picked from commit 61cdfb9e194d2a327eef301e8fc80b63e3e1dc7a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/icl: Fix DDI/TC port clk_off bits

DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.

v2: Add fixes tag (Lucas)

Fixes: c27e917e2bda ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
(cherry picked from commit bb1c7edc6d4d5cc6917814d858d47b22d2e93cde)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/icl: create function to identify combophy port

This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.

Changes since V1:
 - keep all intel_port_is_* helper together (Lucas)

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
(cherry picked from commit 176597a12d61709727d1639836e5d68a6e7c437b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next

Fixes for 4.20.  Highlights:
- VCN DPG fixes for Picasso
- Add support for the latest vega20 vbios
- Scheduler timeout fix
- License fixes for radeon and amdgpu
- Misc other fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215427.2804-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-fixes-2018-10-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Add quirk to fix orientation of Acer One 10 (S1003) panel (Hans)

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017200741.GA240649@art_vandelay