Gabor Juhos [Mon, 7 May 2012 17:40:09 +0000 (17:40 +0000)]
pxa: switch to 3.3 and mark it as broken
It is working in qemu, but it has not been tested on real hardware.
SVN-Revision: 31642
Gabor Juhos [Mon, 7 May 2012 17:40:06 +0000 (17:40 +0000)]
pxa: add support for 3.3
SVN-Revision: 31641
Jo-Philipp Wich [Mon, 7 May 2012 17:06:39 +0000 (17:06 +0000)]
atheros: Fix compilation
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.
Signed-off-by: Jonathan Bither <jonbither@gmail.com>
SVN-Revision: 31640
Jonas Gorski [Sun, 6 May 2012 21:25:42 +0000 (21:25 +0000)]
base-files: wait for wifi modules to settle
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.
This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.
SVN-Revision: 31639
Jonas Gorski [Sun, 6 May 2012 21:25:34 +0000 (21:25 +0000)]
bcm63xx: fix a race between PCI bus scan and fallback sprom registration
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.
Fixes #11384.
SVN-Revision: 31638
Felix Fietkau [Sun, 6 May 2012 21:19:14 +0000 (21:19 +0000)]
kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
Felix Fietkau [Sun, 6 May 2012 21:19:04 +0000 (21:19 +0000)]
pptp: fix installation path for netifd proto handler
SVN-Revision: 31636
Hauke Mehrtens [Sun, 6 May 2012 20:44:37 +0000 (20:44 +0000)]
brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.
SVN-Revision: 31635
Hauke Mehrtens [Sun, 6 May 2012 20:43:17 +0000 (20:43 +0000)]
kernel: remove kernel modules and references to kernels <= 2.6.36
OpenWrt does not support kernel version <= 2.6.36 any more, remove all modules only build for those kernels and all conditions specific for those kernel versions.
SVN-Revision: 31634
Hauke Mehrtens [Sun, 6 May 2012 20:40:54 +0000 (20:40 +0000)]
kernel: remove kmod-usb-serial-airprime
This was removed from kernel 2.6.27
SVN-Revision: 31633
Hauke Mehrtens [Sun, 6 May 2012 20:40:19 +0000 (20:40 +0000)]
kernel: remove kmod-usb-video
This was remove in kernel 2.6.38 and is not needed any more.
The last commit (r31631) has the wrong message, kmod-usb-phidget was removed in kernel 2.6.30.
SVN-Revision: 31632
Hauke Mehrtens [Sun, 6 May 2012 20:37:08 +0000 (20:37 +0000)]
kernel: remove kmod-usb-video
This was remove in kernel 2.6.38 and is not needed any more.
SVN-Revision: 31631
Hauke Mehrtens [Sun, 6 May 2012 20:35:54 +0000 (20:35 +0000)]
kernel: add video-videobuf2
This should fix #11349 and #11142
SVN-Revision: 31630
Hauke Mehrtens [Sun, 6 May 2012 20:34:55 +0000 (20:34 +0000)]
kernel: build kmod-video-gspca-gl860 and kmod-video-gspca-jeilinj on all kernel versions
This module is available on all supported kernel versions
SVN-Revision: 31629
Hauke Mehrtens [Sun, 6 May 2012 20:34:00 +0000 (20:34 +0000)]
kernel: add kmod-video-gspca-konica and remove kmod-video-konica
kmod-video-konica was removed from kernel 2.6.38 and is now replaced by kmod-video-gspca-konica
SVN-Revision: 31628
Hauke Mehrtens [Sun, 6 May 2012 20:33:17 +0000 (20:33 +0000)]
kernel: remove kmod-video-ov511 and kmod-video-ovcamchip
These two modules where removed from kernel with kernel version 2.6.36, use kmod-video-gspca-ov519 instead.
SVN-Revision: 31627
Felix Fietkau [Sun, 6 May 2012 17:15:00 +0000 (17:15 +0000)]
atheros: clean up the patches some more
SVN-Revision: 31626
Felix Fietkau [Sun, 6 May 2012 17:08:30 +0000 (17:08 +0000)]
atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
SVN-Revision: 31625
Jo-Philipp Wich [Sun, 6 May 2012 17:04:37 +0000 (17:04 +0000)]
scons: fix compatibility with python 3, upstream still does not support it...
SVN-Revision: 31624
Jonas Gorski [Sun, 6 May 2012 14:04:19 +0000 (14:04 +0000)]
AR7: don't mark as broken
Linux 3.3.4 boots fine on my AR7 device.
SVN-Revision: 31623
Felix Fietkau [Sun, 6 May 2012 08:27:40 +0000 (08:27 +0000)]
ubus: update to latest version, add LUAPATH to cmake options - fixes #11398
SVN-Revision: 31622
Felix Fietkau [Sat, 5 May 2012 21:02:35 +0000 (21:02 +0000)]
scons: override the platform instead of using the host one - fixes build issues on non-linux systems
SVN-Revision: 31620
Jo-Philipp Wich [Sat, 5 May 2012 20:47:38 +0000 (20:47 +0000)]
ubus: update to current git, package up libubus-lua
SVN-Revision: 31619
Felix Fietkau [Sat, 5 May 2012 17:37:34 +0000 (17:37 +0000)]
tools: add scons (patch by Dave Taht)
This makes it more possible to build scons based applications
for openwrt.
SVN-Revision: 31618
Gabor Juhos [Sat, 5 May 2012 17:32:43 +0000 (17:32 +0000)]
ar7: remove 2.6.37 support
SVN-Revision: 31617
Gabor Juhos [Sat, 5 May 2012 17:32:41 +0000 (17:32 +0000)]
ar7: switch to 3.3 and mark the target as broken
SVN-Revision: 31616
Gabor Juhos [Sat, 5 May 2012 17:32:39 +0000 (17:32 +0000)]
ar7: add 3.3 support
SVN-Revision: 31615
Gabor Juhos [Sat, 5 May 2012 17:32:36 +0000 (17:32 +0000)]
ar7: fix kernel_entry extraction
SVN-Revision: 31614
Gabor Juhos [Sat, 5 May 2012 17:32:33 +0000 (17:32 +0000)]
package/ar7-atm: allow to build on 3.3
SVN-Revision: 31613
Gabor Juhos [Sat, 5 May 2012 17:32:29 +0000 (17:32 +0000)]
package/ar7-atm: refresh patches
SVN-Revision: 31612
Gabor Juhos [Sat, 5 May 2012 17:02:41 +0000 (17:02 +0000)]
ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>
SVN-Revision: 31610
Gabor Juhos [Sat, 5 May 2012 17:02:38 +0000 (17:02 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR1041N v2
Patch-by: Vince Huang <axishero@foxmail.com>
SVN-Revision: 31609
Gabor Juhos [Sat, 5 May 2012 17:02:35 +0000 (17:02 +0000)]
ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>
SVN-Revision: 31608
Felix Fietkau [Sat, 5 May 2012 16:56:42 +0000 (16:56 +0000)]
pptp: kill the call manager process on shutdown
SVN-Revision: 31606
Felix Fietkau [Sat, 5 May 2012 16:56:28 +0000 (16:56 +0000)]
pptp: add netifd support
SVN-Revision: 31605
Felix Fietkau [Sat, 5 May 2012 16:56:24 +0000 (16:56 +0000)]
pptp: remove the defaultroute option from options.pptp, this is managed by generic ppp code
SVN-Revision: 31604
Felix Fietkau [Sat, 5 May 2012 16:56:20 +0000 (16:56 +0000)]
netifd: update to latest version, adds support for host route dependencies
SVN-Revision: 31603
Gabor Juhos [Sat, 5 May 2012 13:56:35 +0000 (13:56 +0000)]
ar71xx: update 3.3 patches
SVN-Revision: 31602
Gabor Juhos [Sat, 5 May 2012 13:56:30 +0000 (13:56 +0000)]
ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>
SVN-Revision: 31601
Felix Fietkau [Sat, 5 May 2012 13:06:33 +0000 (13:06 +0000)]
pptp: compile with the openwrt cflags instead of -O0
SVN-Revision: 31600
Hauke Mehrtens [Sat, 5 May 2012 12:53:37 +0000 (12:53 +0000)]
brcm47xx: update target to kernel 3.3
SVN-Revision: 31599
Gabor Juhos [Sat, 5 May 2012 12:48:35 +0000 (12:48 +0000)]
include/kernel-defaults: set V='' if c is not set in OPENWRT_VERBOSE
This fixes the following errors:
CALL arch/powerpc/kernel/prom_init_check.sh
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer axpression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
arch/powerpc/kernel/prom_init_check.sh: line 39: [: ss: integer expression expected
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
SVN-Revision: 31598
Gabor Juhos [Sat, 5 May 2012 11:43:34 +0000 (11:43 +0000)]
linux/2.6.32: R.I.P.
SVN-Revision: 31597
Gabor Juhos [Sat, 5 May 2012 11:43:32 +0000 (11:43 +0000)]
rdc: remove 2.6.32 support
SVN-Revision: 31596
Gabor Juhos [Sat, 5 May 2012 11:43:30 +0000 (11:43 +0000)]
rdc: switch to 3.3 and mark the target as broken
SVN-Revision: 31595
Gabor Juhos [Sat, 5 May 2012 11:43:29 +0000 (11:43 +0000)]
rb532: remove 2.6.32 support
SVN-Revision: 31594
Gabor Juhos [Sat, 5 May 2012 11:43:26 +0000 (11:43 +0000)]
rb532: switch to 3.3 and mark the target broken
SVN-Revision: 31593
Gabor Juhos [Sat, 5 May 2012 11:43:23 +0000 (11:43 +0000)]
rb532: add 3.3 support
SVN-Revision: 31592
Gabor Juhos [Sat, 5 May 2012 11:43:21 +0000 (11:43 +0000)]
mpc83xx: remove broken flag
SVN-Revision: 31591
Gabor Juhos [Sat, 5 May 2012 11:43:19 +0000 (11:43 +0000)]
mpc83xx: populate network config from an uci-default script
SVN-Revision: 31590
Gabor Juhos [Sat, 5 May 2012 11:43:16 +0000 (11:43 +0000)]
mpc83xx: cleanup rb333.dts
SVN-Revision: 31589
Gabor Juhos [Sat, 5 May 2012 11:43:13 +0000 (11:43 +0000)]
mpc83xx: fix MAC addresses on the RB333
SVN-Revision: 31588
Gabor Juhos [Sat, 5 May 2012 11:43:10 +0000 (11:43 +0000)]
mpc83xx: fix build warnings in RB333/600 dtb wrappers
SVN-Revision: 31587
Gabor Juhos [Sat, 5 May 2012 07:20:13 +0000 (07:20 +0000)]
linux/2.6.32: fix layer7 patch
SVN-Revision: 31586
Imre Kaloz [Thu, 3 May 2012 21:51:58 +0000 (21:51 +0000)]
upgrade to 3.3, enable framebuffer
SVN-Revision: 31576
Imre Kaloz [Thu, 3 May 2012 21:50:41 +0000 (21:50 +0000)]
switch to the new linux-firmware git tree, use the new wl12xx firmware files
SVN-Revision: 31575
Jonas Gorski [Thu, 3 May 2012 21:03:50 +0000 (21:03 +0000)]
adm5120: add missing NULL terminator to partition parser list
Fixes #11372.
SVN-Revision: 31574
Hauke Mehrtens [Thu, 3 May 2012 20:18:41 +0000 (20:18 +0000)]
brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
Jo-Philipp Wich [Thu, 3 May 2012 17:19:22 +0000 (17:19 +0000)]
uhttpd: display errors in init script, code formatting changes, bump package version
SVN-Revision: 31572
Jo-Philipp Wich [Thu, 3 May 2012 17:19:20 +0000 (17:19 +0000)]
uhttpd: added uhttpd.docroot
Passes the document-root to the Lua handler by placing it in uhttpd.docroot.
It could alternatively be placed in env.DOCUMENT_ROOT which would more closely
resemble the CGI protocol; but would mean that it is not available at the time
when the handler-chunk is loaded but rather not until the handler is called,
without any code savings.
Signed-off-by: David Favro <openwrt@meta-dynamic.com>
SVN-Revision: 31571
Jo-Philipp Wich [Thu, 3 May 2012 17:19:18 +0000 (17:19 +0000)]
Fixed: [PATCH 2/3] uhttpd URL-codec enhancements.
My apologies, the 2nd of those patches had a syntax error -- that's what
I get for making a last-minute edit, even to the comments, without
testing! :-p
Here is the corrected patch.
-- David
From
d259cff104d2084455476b82e92a3a27524f4263 Mon Sep 17 00:00:00 2001
From: David Favro <openwrt@meta-dynamic.com>
Date: Fri, 27 Apr 2012 14:17:52 -0400
Subject: [PATCH] uhttpd URL-codec enhancements.
* uh_urlencode() and uh_urldecode() now return an error condition for
buffer-overflow and malformed-encoding rather than normal return with corrupt
or truncated data. As HTTP request processing is currently implemented, this
causes a 404 HTTP status returned to the client, while 400 is more
appropriate.
* Exposed urlencode() to Lua.
* Lua's uhttpd.urlencode() and .urldecode() now raise an error condition for
buffer-overflow and malformed-encoding rather than normal return with
incorrect data.
SVN-Revision: 31570
Jo-Philipp Wich [Thu, 3 May 2012 17:19:16 +0000 (17:19 +0000)]
uhttpd URL-codec bug fixes.
* Fixed output-buffer-overflow bug in uh_urlencode() and uh_urldecode() [tested
input-buffer index against output-buffer length]. In reality, this would not
typically cause an overflow on decode, where the output string would be
expected to be shorter than the input string; and uh_urlencode() seems to have
been unreferenced in the source.
* Fixed bug: uh_urlencode() and uh_urldecode() both read one extra byte from the
input-string. While this could manifest in C code, the result was most
egregious when called from Lua, where it caused an extra null byte to be
embedded at the end of the output string.
* uh_urlencode() cleanup: removed redundant bitwise-and.
Signed-off-by: David Favro <openwrt@meta-dynamic.com>
SVN-Revision: 31569
Gabor Juhos [Thu, 3 May 2012 13:29:36 +0000 (13:29 +0000)]
package/pptp: remove a stray bracket
SVN-Revision: 31568
Gabor Juhos [Thu, 3 May 2012 09:43:10 +0000 (09:43 +0000)]
Fix iptables abuse of kernel header files. Use exported headers instead.
[juhosg: export xt_layer7.h for all kernel versions]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
SVN-Revision: 31566
Gabor Juhos [Thu, 3 May 2012 09:39:01 +0000 (09:39 +0000)]
Fix pptp handling of routes to server.
The existing code is fairly broken. It assumes you're using Legacy IP, and
it assumes that the server is reachable via your default route. Via the
first default route in the 'route -n' output, in fact, regardless of metric.
Fix all those problems by using 'ip route get' to really find the *current*
route to the server, and install a host-specific route to match.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
SVN-Revision: 31565
Gabor Juhos [Thu, 3 May 2012 09:38:58 +0000 (09:38 +0000)]
Add ppp-mod-pppol2tp subpackage to ppp
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
SVN-Revision: 31564
Gabor Juhos [Wed, 2 May 2012 19:17:59 +0000 (19:17 +0000)]
ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
removing a line(default is correct), and reversed the
Lan/wan layout LLLLW to WLLLL.
Added: image/Makefile now builds -factory.bin files. I am
unsure of the accepted way to change the makefile but
the name of the image needs to be 'linkn Kernel Image'
in order to be accepted by the OEM firmware.
Known issue: eth0 (internal switch i think has mac address:
00:11:22:33:44:55 but i think it should be same as
the lan).
Known issue: Pressing the reset button has no noticable effect,
i would expect the router to boot failsafe if being
pressed on boot, reboot if short press and reset all
to default if long press.
[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]
Signed-off-by: David Pearce <david_18051985@hotmail.com>
SVN-Revision: 31557
Gabor Juhos [Wed, 2 May 2012 19:17:58 +0000 (19:17 +0000)]
ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.
With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.
Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 31556
Gabor Juhos [Wed, 2 May 2012 18:27:26 +0000 (18:27 +0000)]
mpc83xx: remove 2.6.36 support
SVN-Revision: 31555
Gabor Juhos [Wed, 2 May 2012 18:27:25 +0000 (18:27 +0000)]
mpc83xx: switch to 3.3
SVN-Revision: 31554
Gabor Juhos [Wed, 2 May 2012 18:27:22 +0000 (18:27 +0000)]
mpc83xx: add support for 3.3
SVN-Revision: 31553
Gabor Juhos [Wed, 2 May 2012 18:27:19 +0000 (18:27 +0000)]
linux/3.3: add more missing symbols
SVN-Revision: 31552
Florian Fainelli [Wed, 2 May 2012 15:40:32 +0000 (15:40 +0000)]
openssl: update to 1.0.1b
SVN-Revision: 31551
Florian Fainelli [Wed, 2 May 2012 15:40:26 +0000 (15:40 +0000)]
use a define for the poll and debounce interval
SVN-Revision: 31550
Jo-Philipp Wich [Tue, 1 May 2012 22:45:55 +0000 (22:45 +0000)]
ext-toolchain.sh: don't pass CFLAGS when wrapping ld
SVN-Revision: 31549
Gabor Juhos [Tue, 1 May 2012 08:00:26 +0000 (08:00 +0000)]
linux/3.3: add more missing symbols
SVN-Revision: 31548
Gabor Juhos [Tue, 1 May 2012 08:00:25 +0000 (08:00 +0000)]
move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
SVN-Revision: 31547
Imre Kaloz [Tue, 1 May 2012 07:00:17 +0000 (07:00 +0000)]
switch to 2.6.38
SVN-Revision: 31546
Felix Fietkau [Mon, 30 Apr 2012 18:27:12 +0000 (18:27 +0000)]
relayd: move the interface fixup to the right place
SVN-Revision: 31545
Felix Fietkau [Mon, 30 Apr 2012 18:24:00 +0000 (18:24 +0000)]
relayd: use config_load+fixup_interface instead of scan_interfaces to speed up startup time
SVN-Revision: 31544
Felix Fietkau [Mon, 30 Apr 2012 18:23:56 +0000 (18:23 +0000)]
base-files-network: add a fixup_interface function like with the netifd compatibility scripts - allows selective fixup of individual interface sections instead of having to do the full scan_interfaces
SVN-Revision: 31543
Felix Fietkau [Mon, 30 Apr 2012 18:23:52 +0000 (18:23 +0000)]
relayd: use an init script instead of a legacy network proto handler (fixes #11276)
SVN-Revision: 31542
Gabor Juhos [Mon, 30 Apr 2012 08:38:11 +0000 (08:38 +0000)]
kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
Felix Fietkau [Mon, 30 Apr 2012 08:20:34 +0000 (08:20 +0000)]
ath9k: merge a ar93xx ht40 performance fix
SVN-Revision: 31540
Felix Fietkau [Mon, 30 Apr 2012 07:57:09 +0000 (07:57 +0000)]
mac80211: fix station lookup issues
SVN-Revision: 31539
Felix Fietkau [Sun, 29 Apr 2012 21:00:17 +0000 (21:00 +0000)]
mac80211: load lib80211 after cfg80211 (#11342)
SVN-Revision: 31537
Gabor Juhos [Sun, 29 Apr 2012 18:29:31 +0000 (18:29 +0000)]
linux: rtl836x: add a generic reset_switch function
SVN-Revision: 31536
Gabor Juhos [Sun, 29 Apr 2012 18:29:29 +0000 (18:29 +0000)]
linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
SVN-Revision: 31535
Gabor Juhos [Sun, 29 Apr 2012 18:29:26 +0000 (18:29 +0000)]
linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
SVN-Revision: 31534
Gabor Juhos [Sun, 29 Apr 2012 18:29:24 +0000 (18:29 +0000)]
ar71xx: allow to disable link polling on unused PHYs
SVN-Revision: 31533
Gabor Juhos [Sun, 29 Apr 2012 16:56:07 +0000 (16:56 +0000)]
rb532: remove 2.6.35 support
The generic 2.6.35 support has been remove long time ago.
SVN-Revision: 31532
Gabor Juhos [Sun, 29 Apr 2012 16:56:03 +0000 (16:56 +0000)]
linux/3.3: refresh patches
SVN-Revision: 31531
Gabor Juhos [Sun, 29 Apr 2012 15:59:49 +0000 (15:59 +0000)]
rdc: add 3.3 support
SVN-Revision: 31530
Gabor Juhos [Sun, 29 Apr 2012 15:55:28 +0000 (15:55 +0000)]
mpc85xx: add support for 3.3
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31529
Gabor Juhos [Sun, 29 Apr 2012 15:20:40 +0000 (15:20 +0000)]
orion: add 3.3 support
SVN-Revision: 31528
Gabor Juhos [Sun, 29 Apr 2012 15:08:24 +0000 (15:08 +0000)]
linux/3.3: yet another missing symbol
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31527
Gabor Juhos [Sun, 29 Apr 2012 15:08:23 +0000 (15:08 +0000)]
package/kernel: add module for the Pericom PT7C4338 RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31526
Gabor Juhos [Sun, 29 Apr 2012 15:08:22 +0000 (15:08 +0000)]
linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31525
Gabor Juhos [Sun, 29 Apr 2012 15:08:21 +0000 (15:08 +0000)]
package/kernel: add i2c module support for Freescale MPC processors
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31524
Gabor Juhos [Sun, 29 Apr 2012 15:00:38 +0000 (15:00 +0000)]
mpc85xx: add kmod-booke-wdt to the default packages
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31523
projects / openwrt / staging / thess.git / log