Merge pull request #11493 from TDT-AG/pr/20200303-bonding

bonding: add missing policies

Merge pull request #11492 from ja-pa/measurement-kit-0.10.11

measurement-kit: update to version 0.10.11

bonding: add missing policies

Signed-off-by: Helge Mader <ma@dev.tdt.de>

measurement-kit: update to version 0.10.11

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>

Merge pull request #11490 from nxhack/node_serialport_807

node-serialport: update to 8.0.7

Merge pull request #11489 from nxhack/node_serialport_bindings_807

node-serialport-bindings: update to 8.0.7

Merge pull request #11487 from nxhack/node_hid_120

node-hid: update to 1.2.0

node-serialport: update to 8.0.7

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

node-serialport-bindings: update to 8.0.7

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

node-hid: update to 1.2.0

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

Merge pull request #11481 from jmarcet/python-requests

python-requests: update to version 2.23.0

python-requests: update to version 2.23.0

Signed-off-by: Javier Marcet <javier@marcet.info>

mosquitto: bump to 1.6.9

Full changelog: https://mosquitto.org/blog/2020/02/version-1-6-9-released/

Nothing of particular relevant to OpenWrt, just general fixes.

Signed-off-by: Karl Palsson <karlp@etactica.com>

Merge pull request #11471 from fantom-x/syncthing

syncthing: enable/disable via config, lower priority, cleanup

syncthing: enable via config, lower priority, cleanup

Added the ability to enable/disable via a config file;
the default is enabled for backwards compatibility.

This is an additional service, so running it the
same priority as dnsmasq, etc does not make sense.

Added USE_PROCD=1

"done" starts at "START=95", so this should start earlier

Added STOP=10 to stop syncthing early

Compile-tested on: ipq806x, ipq40xx
Runtime-tested on: ipq806x, ipq40xx

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

Merge pull request #11473 from nickberry17/update_libqmi

libqmi: bump libqmi version

libqmi: bump libqmi version

Signed-off-by: Nicholas Smith <nicholas.smith@telcoantennas.com.au>

Merge pull request #11469 from BKPepe/youtubedl

youtube-dl: update to version 2020.3.1

Merge pull request #11462 from yousong/sqm

sqm-scripts: luci-app-sqm: init ucitrack with uci-defaults

git: update to version 2.25.1

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

youtube-dl: update to version 2020.3.1

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

Merge pull request #11463 from zhaojh329/rtty

rtty: update to 7.1.2

rtty: update to 7.1.2

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>

sqm-scripts: luci-app-sqm: init ucitrack with uci-defaults

To avoid build failure when luci-app-sqm is selected as builtin where
the ipk will be installed on build machine

While at it, switch to using $(MAKE) instead of plain "make"

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

Merge pull request #11423 from fantom-x/irqbalance-add-interval

irqbalance: add support for interval and banirq

irqbalance: add support of interval and banirq

Added the ability to change sampling interval
and provide a list of IRQ's to ignore
via /etc/config/irqbalance

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

Merge pull request #11430 from fantom-x/irqbalance-upgrade

irqbalance: upgrade to 1.6.0

irqbalance: upgrade to 1.6.0

Upgraded from 1.2.0 to 1.6.0 to pick up
all the latest fixes and improvements

irqbalance made glib2 mandatory since 1.3.0, but is
using very little of it. glib2 linked statically
to minimize the impact.

1.2.0 size: 33,619
1.6.0 size: 99,539

~# irqbalance --version
irqbalance version 1.6.0

~# ldd /usr/sbin/irqbalance
/lib/ld-musl-armhf.so.1 (0xb6f5f000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6f43000)
libc.so => /lib/ld-musl-armhf.so.1 (0xb6f5f000)

~# opkg info irqbalance
Package: irqbalance
Version: 1.6.0-6
Depends: libc
Status: install user installed
Architecture: arm_cortex-a7_neon-vfpv4
Installed-Time: 1582839249

Compile-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Run-tested:     ipq806x/R7800 & ipq40xx/GL-B1300

Signed-off-by: Marc Benoit <marcb62185@gmail.com>

Merge pull request #11435 from neheb/hdjeeih

alpine: update to 2.22

ddns-scripts: bump package version

Signed-off-by: Rosen Penev <rosenp@gmail.com>

ddns-scripts: fix logging bug

Fixes issue #11282, this patch was provided by PaulFertser on the #openwrt
IRC.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11444 from neheb/stb

stubby: fix init script

Merge pull request #11447 from neheb/prot2

protobuf: link against libm under glibc

alpine: update to 2.22

Switch to standard tarballs. Remove autoreconf as a result.

Simplify NLS and IPv6 handling. Removed options are default.

Remove upstreamed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11454 from neheb/upm

upmpdcli: link against libm under glibc

u2pnpd: update to 0.5

This update fixes #11452 since LFS detection support was added upstream.
While at, update SPDX license tag to latest standard.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

upmpdcli: link against libm under glibc

Fixes compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

idevicerestore: update to 2020-02-17

Fix compilation under glibc.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

libirecovery: fix version

The hash was correct but not the source version. No idea how this happened

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11416 from Borromini/master

Unbound: update to 1.10.0

Merge pull request #11448 from neheb/upnpppppp

libupnpp: link against libm under glibc

Merge pull request #11445 from neheb/mp

mpd: link against libm under glibc

Merge pull request #11427 from neheb/h56y

libarchive: update to 3.4.2

Merge pull request #11426 from neheb/log

log4cplus: update to 2.0.5

Merge pull request #11433 from lucize/libreup

libreswan: update to 3.30

mpd: link against libpthread under glibc

Fixes compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11450 from TDT-AG/pr/20200227-keepalived

keepalived: update version to 2.0.20

Merge pull request #11438 from ja-pa/python-zipp-3.0.0

python-zipp: update to version 3.0.0

Merge pull request #11443 from nxhack/node_v12_16_0

node: update to v12.16.1

Merge pull request #11451 from jow-/cgi-io-fix-uclibc

cgi-io: fix compilation against uClibc

Merge pull request #11449 from neheb/addrw

addrwatch: update to 1.0.2

cgi-io: fix compilation against uClibc

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

keepalived: update version to 2.0.20

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

Merge pull request #11439 from tete1030/fix-runc

runc/containerd: Fix incomplete cleanup in Build/InstallDev

Merge pull request #11446 from neheb/ola

ola: link against libm under glibc

addrwatch: update to 1.0.2

Switch to standard tarball to avoid autoreconfig.

Fix license information.

Add PKG_BUILD_PARALLEL for faster compilation.

Add PKG_INSTALL for consistency with other packages.

Removed upstreamed patches. Refresh remaining one.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

libupnpp: link against libm under glibc

Fixes compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

protobuf: link against libm under glibc

Fixes compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

ola: link against libm under glibc

Fixes compilation.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

stubby: fix init script

The configuration file was not being generated.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

containerd: fix incomplete cleanup in Build/InstallDev

Currently it only cleans up binaries when executing
Build/InstallDev without deleting .built stamp file.

This leads to wrong information about existence of
built runc binaries and causes error when executing
package/containerd/install twice.

Signed-off-by: Texot Qi <tete1030@gmail.com>

runc: fix incomplete cleanup in Build/InstallDev

Currently it only cleans up binaries when executing
Build/InstallDev without deleting .built stamp file.

This leads to wrong information about existence of
built runc binaries and causes error when executing
package/runc/install twice.

Signed-off-by: Texot Qi <tete1030@gmail.com>

Merge pull request #11434 from lucize/frrup

frr: update to 7.3

frr: update to 7.3

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

python-zipp: update to version 3.0.0

Changes:
-remove dependency on more-itertools
-fix build dependency

Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>

pagekite: add simple websockets and update syntax

Syntax now matches preferred upstream style.

Signed-off-by: Karl Palsson <karlp@tweak.net.au>

pagekite: avoid redundant information in syslog

Patch from upstream: https://github.com/pagekite/libpagekite/commit/7b4587818564aa667f868249e9a8f1dc1d095fd3

Signed-off-by: Karl Palsson <karlp@tweak.net.au>

pagekite: bump to v0.91.200218

pings the front ends less aggressively, reducing cpu usage on the host.

Signed-off-by: Karl Palsson <karlp@tweak.net.au>

Merge pull request #11428 from TDT-AG/pr/20200224-btrfs

btrfs-progs: add kmod btrfs dependency

libimobiledevice: update to 2020-02-19

Added config directory patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

btrfs-progs: add kmod btrfs dependency

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

ocserv: updated to 0.12.6

Signed-off-by: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>

php7: update to 7.4.3

This fixes:
  - CVE-2020-7061
  - CVE-2020-7062
  - CVE-2020-7063

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

libreswan: update to 3.30

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>

Merge pull request #11404 from neheb/stub

stubby: makefile and init script cleanup

stubby: makefile and init script cleanup

Reordered Makefile according to
https://github.com/openwrt/packages/pull/9399#issuecomment-508727872 .

Added PKG_BUILD_PARALLEL for faster compilation.

Remove duplicated conffiles section.

Install /etc/config/stubby using INSTALL_CONF, as is done elsewhere

Run init script through shellcheck and clean it up.

Added chmod for the stubby config file, to fix a LuCI issue.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11396 from neheb/cap2

libcap: update to 2.32

Merge pull request #11335 from neheb/dump

dump1090: update to 3.8.0

libarchive: update to 3.4.2

Switch to normal tarballs. Remove autoreconf as a result.

Several Makefile cleanups for consistency.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

log4cplus: update to 2.0.5

Remove CMake option made obsolete by cmake.mk

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11004 from neheb/dln

minidlna: update to latest master

minidlna: update to latest master

Removed inactive maintainer.

Cleaned up Makefile to remove old options.

Switched to PKG_INSTALL for consistency.

Added PKG_BUILD_PARALLEL for faster compilation.

Fixed license info.

Removed '' from enabled for consistency.

Ran init script through shellcheck. Batched config file writes.

Switched it to use procd. The -S parameter changes it to foreground. It
stands for systemd.

Added a sysctl tweak to get rid of warning.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

protobuf-c: update to 1.3.3

Refreshed patch.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

vala: update to 0.46.6

Added BUILDONLY flag to hide from menuconfig.

Signed-off-by: Rosen Penev <rosenp@gmail.com>

Merge pull request #11398 from neheb/mpc2

mpc: update to 0.33

Merge pull request #11399 from neheb/mpcc

libmpdclient: update to 2.18

Merge pull request #11390 from neheb/upnpppp

libupnpp: update to 0.17.2

Merge pull request #11350 from Cynerd/bigclown-utils-update

Bigclown utils update

Merge pull request #11397 from neheb/mpc

ncdu: update to 1.14.2

Merge pull request #11422 from jefferyto/python-idna-2.9

python-idna: Update to 2.9

Merge pull request #11421 from jefferyto/python-enum34-1.1.9

python-enum34: Update to 1.1.9, refresh patch

Merge pull request #11420 from jefferyto/python-automat-20.2.0

python-automat: Update to 20.2.0, refresh patches

Merge pull request #11376 from ja-pa/python-flask-login-update

python-flask-login: update to version 0.5.0

Merge pull request #11419 from dbermond/samba4-multijob-fix

samba4: bring back the fix to build with parallel jobs

python-idna: Update to 2.9

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

python-enum34: Update to 1.1.9, refresh patch

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

python-automat: Update to 20.2.0, refresh patches

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

samba4: bring back the fix to build with parallel jobs

Fixes #11417

The fix was implemented in commit 710700c and was later removed in
commit c50c583.

Signed-off-by: Daniel Bermond <danielbermond@gmail.com>

unbound: enable ipset support for the unbound-daemon-heavy variant.

This patch enables ipset support in the unbound-daemon-heavy variant. See [1] for
instructions on how to use it.

Also fix a minor typo in the libunbound-light description.

[1] https://github.com/NLnetLabs/unbound/pull/28

Signed-off-by: Stijn Segers <foss@volatilesystems.org>

Unbound: update to 1.10.0

Signed-off-by: Stijn Segers <foss@volatilesystems.org>