Dan Haab [Wed, 5 Feb 2020 17:37:44 +0000 (10:37 -0700)]
bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routers
Luxul ABR-4500 and XBR-4500 devices are wired routers with 5 Ethernet
ports and 1 USB 3.0 port. Flashing requires using Luxul firmware 6.4.0
or newer and uploading firmware using "Firmware Update" web UI page.
Signed-off-by: Dan Haab <dan.haab@legrand.com>
Dan Haab [Wed, 5 Feb 2020 17:37:43 +0000 (10:37 -0700)]
firmware-utils: add lxlfw tool for generating Luxul firmwares
It's a simple tool prepending image with a Luxul header.
Signed-off-by: Dan Haab <dan.haab@legrand.com>
Chuanhong Guo [Tue, 7 Jan 2020 00:12:03 +0000 (16:12 -0800)]
ath79: ag71xx: use netif_receive_skb_list on 4.19
This new function make batch processing of network packets possible,
which slightly improves performance.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Tested-by: Rosen Penev <rosenp@gmail.com>
Daniel Golle [Wed, 5 Feb 2020 15:43:03 +0000 (17:43 +0200)]
kernel: remove duplicate flash chip definition
XTX XT25F128A shares it's chip ID with XM25QH128A which got identical
features. Hence there it makes no sense to add it to the driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Chuanhong Guo [Thu, 6 Feb 2020 14:30:14 +0000 (22:30 +0800)]
ath79: use ar934x-spi for ar933x as well
ar933x appears to have the same spi controller as ar934x but it's
not mentioned in datasheet at all. Use new spi driver instead to
gain more flash operating performance.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Wed, 5 Feb 2020 12:25:45 +0000 (20:25 +0800)]
ath79: add new ar934x spi driver
A new shift mode was introduced since ar934x which has a way better
performance than current bitbang driver and can handle higher spi
clock properly. This commit adds a new driver to make use of this
new feature.
This new driver has chipselect properly configured and we don't need
cs-gpios hack in dts anymore. Remove them.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Rafał Miłecki [Thu, 6 Feb 2020 10:36:15 +0000 (11:36 +0100)]
mac80211: brcm: backport remaining 5.6 kernel patches
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Jason A. Donenfeld [Wed, 5 Feb 2020 13:46:46 +0000 (14:46 +0100)]
wireguard: bump to 0.0.
20200205
* compat: support building for RHEL-8.2
* compat: remove RHEL-7.6 workaround
Bleeding edge RHEL users should be content now (which includes the actual
RedHat employees I've been talking to about getting this into the RHEL kernel
itself). Also, we remove old hacks for versions we no longer support anyway.
* allowedips: remove previously added list item when OOM fail
* noise: reject peers with low order public keys
With this now being upstream, we benefit from increased fuzzing coverage of
the code, uncovering these two bugs.
* netns: ensure non-addition of peers with failed precomputation
* netns: tie socket waiting to target pid
An added test to our test suite for the above and a small fix for high-load CI
scenarios.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
INAGAKI Hiroshi [Mon, 26 Aug 2019 11:27:22 +0000 (20:27 +0900)]
ramips: add support for I-O DATA WN-AX1167GR2
I-O DATA WN-AX1167GR2 is a 2.4/5 GHz band 11ac router, based on MediaTek
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : NAND 128 MiB
- WLAN : MediaTek MT7615D (2.4/5 GHz, 2T2R)
- Ethernet : 5x 10/100/1000 Mbps
- Switch : MediaTek MT7621A (MT7530)
- LEDs/Input : 2x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J5: Vcc, TX, RX, NC, GND
- 57600 bps
Flash instruction using initramfs image:
1. Boot WN-AX1167GR2 normally
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt initramfs image and click update ("更新")
button to perform firmware update
4. On the initramfs image, perform sysupgrade with squashfs-sysupgrade
image
5. Wait ~120 seconds to complete flashing
Notes:
- configuration in DeviceTree of DBDC (Dual-Band-Dual-Concurrent) mode
for MT7615D chip is not supported in mt76 driver
- last 0x80000 (512 KiB) in NAND flash is not used on stock firmware
- stock firmware requires "customized uImage header" by MSTC
(MitraStar Technology Corp.), but U-Boot doesn't
- uImage magic (0x0 - 0x3) : 0x434F4D42 (COMB)
- header crc32 (0x4 - 0x7) : with data length and data crc32
- image name (0x20 - 0x37) : model ID and firmware versions
- data length (0x38 - 0x3b): kernel + rootfs
- data crc32 (0x3c - 0x3f) : kernel + rootfs
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
INAGAKI Hiroshi [Tue, 9 Apr 2019 05:48:31 +0000 (14:48 +0900)]
ramips: add support for I-O DATA WN-DX1167R
I-O DATA WN-DX1167R is a 2.4/5 GHz band 11ac rotuer, based on MediaTek
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : NAND 128 MiB
- WLAN : MediaTek MT7615D (2.4/5 GHz, 2T2R)
- Ethernet : 5x 10/100/1000 Mbps
- Switch : MediaTek MT7621A (MT7530)
- LEDs/Input : 2x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J5: Vcc, TX, RX, NC, GND
- 57600 bps
Flash instruction using initramfs image:
1. Boot WN-DX1167R normally
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt initramfs image and click update ("更新")
button to perform firmware update
4. On the initramfs image, perform sysupgrade with squashfs-sysupgrade
image
5. Wait ~120 seconds to complete flashing
Notes:
- configuration in DeviceTree of DBDC (Dual-Band-Dual-Concurrent) mode
for MT7615D chip is not supported in mt76 driver
- last 0x80000 (512 KiB) in NAND flash is not used on stock firmware
- stock firmware requires "customized uImage header" by MSTC
(MitraStar Technology Corp.), but U-Boot doesn't
- uImage magic (0x0 - 0x3) : 0x434F4D43 (COMC)
- header crc32 (0x4 - 0x7) : with data length and data crc32
- image name (0x20 - 0x37) : model ID and firmware versions
- data length (0x38 - 0x3b): kernel + rootfs
- data crc32 (0x3c - 0x3f) : kernel + rootfs
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
INAGAKI Hiroshi [Tue, 24 Sep 2019 18:02:04 +0000 (03:02 +0900)]
ramips: extend and rename wr1201-factory-header
This commit adds the ability to set custom uImage magic to
Build/wr1201-factory-header and renames it to
"Build/custom-initramfs-uimage".
Custom uImage header in initramfs image is required on following
devices:
- I-O DATA WN-AX1167GR2
- I-O DATA WN-AX2033GR
- I-O DATA WN-AX2033GR2
- I-O DATA WN-DX1167R
While at it, fix typo in comment.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[shorten commit title, minor commit message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Jo-Philipp Wich [Wed, 5 Feb 2020 14:31:34 +0000 (15:31 +0100)]
Revert "iwinfo: update to latest Git HEAD"
This reverts commit
96424c143dd818b391d9b8da18249eca1d2e6c83.
The commit changed libiwinfo's internal ABI which breaks a number of
downstream projects, including LuCI and rpcd-mod-iwinfo.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Kevin Darbyshire-Bryant [Thu, 30 Jan 2020 18:32:00 +0000 (18:32 +0000)]
procd: support 'requirejail' attribute
Bump procd package to reduce log spam related to missing jail binaries
in a non-jail capable system.
bcb8655 instance: add 'requirejail' attribute
An additional jail attribute 'requirejail' can now be used to indicate
mandatory use of a jailed environment and hence prevent process startup
in the event that the jail subsystem is unavailable.
Procd will now only log errors if jail is unavailable and 1) is a mandatory
requirement or 2) a procd debug level of at least 2 is in use.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
David Bauer [Tue, 4 Feb 2020 13:53:52 +0000 (14:53 +0100)]
iwinfo: update to latest Git HEAD
eba5a20 iwinfo: add device id for BCM43602
a6914dc iwinfo: add BSS load element to scan result
bb21698 iwinfo: add device id for Atheros AR9287
7483398 iwinfo: add device id for MediaTek MT7615E
Signed-off-by: David Bauer <mail@david-bauer.net>
Álvaro Fernández Rojas [Tue, 4 Feb 2020 18:02:53 +0000 (19:02 +0100)]
brcm2708: update to latest patches from RPi foundation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Tue, 4 Feb 2020 18:02:20 +0000 (19:02 +0100)]
brcm2708-gpu-fw: update to latest firmware
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Koen Vandeputte [Mon, 6 Jan 2020 13:10:42 +0000 (14:10 +0100)]
kernel: add support for GD25D05 SPI NOR
This chip is used on newer RB912UAG-5HPnD r2 boards:
Before:
[ 0.642553] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 10
[ 0.649381] NAND flash driver for the RouterBOARD 91x series
After:
[ 0.641714] m25p80 spi0.0: found gd25d05, expected m25p80
[ 0.649916] m25p80 spi0.0: gd25d05 (64 Kbytes)
[ 0.655122] Creating 4 MTD partitions on "spi0.0":
[ 0.660164] 0x000000000000-0x00000000c000 : "routerboot"
[ 0.667782] 0x00000000c000-0x00000000d000 : "hard_config"
[ 0.675073] 0x00000000d000-0x00000000e000 : "bios"
[ 0.682613] 0x00000000e000-0x00000000f000 : "soft_config"
[ 0.690304] NAND flash driver for the RouterBOARD 91x series
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 4 Feb 2020 12:17:37 +0000 (13:17 +0100)]
kernel: bump 4.19 to 4.19.101
Refreshed all patches.
Fixes:
- CVE-2019-14896
- CVE-2019-14897
Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 950-0202-staging-bcm2835-camera-fix-module-autoloading.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 4 Feb 2020 11:04:59 +0000 (12:04 +0100)]
kernel: bump 4.14 to 4.14.169
Refreshed all patches.
Fixes:
- CVE-2019-14896
- CVE-2019-14897
Remove upstreamed:
- 023-0007-crypto-crypto4xx-Fix-wrong-ppc4xx_trng_probe-ppc4xx_.patch
- 001-4.22-01-MIPS-BCM63XX-drop-unused-and-broken-DSP-platform-dev.patch
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Sungbo Eo [Tue, 4 Feb 2020 16:00:15 +0000 (01:00 +0900)]
ramips: remove unnecessary execute permission bit
dts file does not need to be executable. 644 is enough.
Fixes: f098c612b6db ("ramips: create shared DTSI for Netgear EX2700 and WN3000RP v3")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Tue, 4 Feb 2020 15:54:45 +0000 (00:54 +0900)]
mediatek: remove unnecessary execute permission bit
kernel config and patch files do not need to be executable. 644 is enough.
Fixes: 01c8f2e97cc6 ("mediatek: bump to v4.19")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Michal Cieslakiewicz [Mon, 20 Jan 2020 20:20:09 +0000 (21:20 +0100)]
uboot-envtools: ath79: add Netgear WNDR3700v2
Add Netgear WNDR3700v2 to the list of supported boards.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
[rebase, adjusted commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Michal Cieslakiewicz [Mon, 3 Feb 2020 18:54:31 +0000 (19:54 +0100)]
ath79: WNDR3700 v1/v2: make u-boot env partition writable
Remove read-only flag from U-boot environment partition for Netgear
WNDR3700 v1 and v2 so u-boot-envtools can modify data there.
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Adrian Schmutzler [Tue, 4 Feb 2020 11:15:45 +0000 (12:15 +0100)]
mediatek: remove KERNEL_PATCHVER overwrite for mt7629
Since whole target has been bumped to kernel 4.19 in
01c8f2e97cc6
("mediatek: bump to v4.19") we do not need the overwrite in mt7629
subtarget anymore.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
John Crispin [Tue, 4 Feb 2020 06:46:52 +0000 (07:46 +0100)]
mediatek: bump to v4.19
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 28 Jan 2020 10:28:03 +0000 (11:28 +0100)]
bcm4xxx: fix iwinfo behaviour
Signed-off-by: John Crispin <john@phrozen.org>
August Huber [Sun, 26 Jan 2020 16:55:11 +0000 (11:55 -0500)]
ath79: add support for COMFAST CF-E560AC
This commit adds support for the COMFAST CF-E560AC, an ap143 based
in-wall access point.
Specifications:
- SoC: Qualcomm Atheros QCA9531
- RAM: 128 MB DDR2 (Winbond W971GG6SB-25)
- Storage: 16 MB NOR (Winbond 25Q128JVSO)
- WAN: 1x 10/100 PoE ethernet (48v)
- LAN: 4x 10/100 ethernet
- WLAN1: QCA9531 - 802.11b/g/n - 2x SKY85303-21 FEM
- WLAN2: QCA9886 - 802.11ac/n/a - 2x SKY85735-11 FEM
- USB: one external USB2.0 port
- UART: 3.3v, 2.54mm headers already populated on board
- LED: 7x external
- Button: 1x external
- Boot: U-Boot 1.1.4 (pepe2k/u-boot_mod)
MAC addressing:
- stock
LAN *:40 (label)
WAN *:41
5G *:42
2.4G *:4a
- flash (art partition)
0x0 *:40 (label)
0x6 *:42
0x1002 *:41
0x5006 *:43
This device contains valid MAC addresses in art 0x0, 0x6, 0x1002 and
0x5006, however the vendor firmware only reads from art:0x0 for the LAN
interface and then increments in 02_network. They also jump 8 addresses
for the second wifi interface (2.4 GHz). This behavior has been duplicated
in the DTS and ath10k hotplug to align addresses with the vendor firmware
v2.6.0.
Recovery instructions:
This device contains built-in u-boot tftp recovery.
1. Configure PC with static IP 192.168.1.10/24 and tftp server.
2. Place desired image at /firmware_auto.bin at tftp root.
3. Connect device to PC, and power on.
4. Device will fetch flash from tftp, flash and reboot into new image.
Signed-off-by: August Huber <auh@google.com>
[move jtag_disable_pins, remove unnecessary statuses in DTS, remove
duplicate entry in 11-ath10k-caldata, remove hub_port0 label in DTS]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Michal Cieslakiewicz [Mon, 20 Jan 2020 20:19:29 +0000 (21:19 +0100)]
ath79: WNDR3700 v2: add dash before version in device name
Adapt Netgear WNDR3700v2 device identification string to ath79 naming
scheme by changing from 'wndr3700v2' to 'wndr3700-v2' (affects config,
makefile, init scripts and device tree definition).
Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Felix Fietkau [Sun, 2 Feb 2020 19:07:47 +0000 (20:07 +0100)]
mt76: update to the latest version
8f33a1e936fd mt76: mt7615: report firmware log event messages
43db699b1ad8 mt76: mt7615: increment the MAC address of the secondary PHY (DBDC)
161d1c73c62a mt7615: use local MAC address for the second PHY
9453dbe921b9 mt76: set dma-done flag for flushed descriptors
65745c5ac503 mt76: fix handling full tx queues in mt76_dma_tx_queue_skb_raw
14f37f8d86eb mt76: dma: do not write cpu_idx on rx queue reset until after refill
99ce68625473 mt76: mt7603: increase dma mcu rx ring size
62c447e2c75f mt76: enable Airtime Queue Limit support
1c258940d818 mt76: mt7615: report TSF information
2d22ef618712 mt76: mt7615: add per-phy mib statistics
8d690f3bfbc4 mt76: mt7615: add a get_stats() callback
b06177ce387c mt76: move dev_irq tracepoint in mt76 module
5ac9889c33f1 mt76: move mac_txdone tracepoint in mt76 module
7801ebd775e3 mt76: mt7615: add tracing support
fd877a17cc0a mt76: mt76x2: get rid of leftover target
039471502578 mt76: mt7615: initialize radar specs from host driver
b208305e6275 mt76: mt7615: fix endianness in mt7615_mcu_set_eeprom
fd1fa6860666 mt76: move WIPHY_FLAG_HAS_CHANNEL_SWITCH in mt76_phy_init
c94afbe3d70a mt76: mt7615: remove leftover routine declaration
29fec3a9b0b4 mt76: rely on mac80211 utility routines to compute airtime
2bb518752b3f mt76: mt76x02u: avoid overwrite max_tx_fragments
a0f1ff0473b5 mt76: mt76u: check tx_status_data pointer in mt76u_tx_tasklet
a5dca118bf40 mt76: mt76u: add mt76u_process_rx_queue utility routine
06caaf0d33b4 mt76: mt76u: add mt76_queue to mt76u_get_next_rx_entry signature
cf8e2590e46b mt76: mt76u: add mt76_queue to mt76u_refill_rx signature
0077b30ce2c8 mt76: mt76u: use mt76_queue as mt76u_complete_rx context
06d466b86981 mt76: mt76u: add queue id parameter to mt76u_submit_rx_buffers
580ddd175eee mt76: mt76u: move mcu buffer allocation in mt76x02u drivers
acc227e14d95 mt76: mt76u: introduce mt76u_free_rx_queue utility routine
aa28404bf287 mt76: mt76u: stop/free all possible rx queues
885fe4a29bb9 mt76: mt76u: add mt76u_alloc_rx_queue utility routine
c85dec848303 mt76: mt76u: add queue parameter to mt76u_rx_urb_alloc
ca7991699109 mt76: mt76u: resume all rx queue in mt76u_resume_rx
e2a39697fb0a mt76: mt76u: introduce mt76u_alloc_mcu_queue utility routine
39fb59ce927b mt76: mt76u: add {read/write}_extended utility routines
8c6cf328eb1f mt76: mt76u: take into account different queue mapping for 7663
e742618fc5ce mt76: mt76u: introduce mt76u_skb_dma_info routine
23b3328e52fe mt76: mt76u: add endpoint to mt76u_bulk_msg signature
82bedb294534 mt76: mt76u: introduce MT_DRV_RX_DMA_HDR flag
2db2bab099d0 firmware: update mt7615 N9 firmware to
20200107155603
60e27689603d firmware: update MT7615 CR4 firmware to
20190121161307
d15a4bbb3f69 mt76: mt7615: add __aligned(4) to txp structs
1c4ff4f2dc7f mt76: mt7615: move mmio related code from pci.c to mmio.c
51b1eb7a4902 mt76: mt7615: split up firmware loading functions
f84b590b6454 mt76: mt7615: store N9 firmware version instead of CR4
92bafd4b1bfc mt76: mt7615: fix MT_INT_TX_DONE_ALL definition for MT7622
13a4269a1bfa mt76: mt7615: add dma and tx queue initialization for MT7622
ab94a85efb18 mt76: mt7615: add eeprom support for MT7622
f0b02d8115b0 mt76: mt7615: add calibration free support for MT7622
fd3ae9a342ae mt76: mt7615: disable 5 GHz on MT7622
80d3681b404d mt76: mt7615: implement probing and firmware loading on MT7622
79808e62324e mt76: mt7615: implement DMA support for MT7622
bddcbb25cd0e mt76: mt7615: decrease rx ring size for MT7622
6cd5c381eaee mt76: mt7615: disable DBDC on MT7622
f66b480434e9 mt76: mt7615: add Kconfig entry for MT7622
68f38eea39b5 firmware: add firmware for MT7622 built-in WiFi
7882bbd25c38 mt76: mt7615: fix and rework tx power handling
0f06914acfb4 mt76: mt7615: implement hardware reset support
db97358df47e mt76: mt7615: add support for testing hardware reset
b9d9f91b1522 mt76: mt7615: fix adding active monitor interfaces
fd216cb5b2f9 mt76: mt7615: fix monitor mode on second PHY
269de7c22957 firmware: fix version number for upcoming mt7615 mcu v2 support patches
9f8c6c4a20b4 mt76: mt7615: simplify mcu_set_bmc flow
ff32af25f83e mt76: mt7615: simplify mcu_set_sta flow
f16433cd7889 mt76: mt7615: add a helper to encapsulate sta_rec operation
77b9d8586307 mt76: mt7615: add starec operating flow for firmware v2
170b21f9ec78 mt76: mt7615: use new tag sta_rec_wtbl
648ce1aaa493 mt76: mt7615: switch mt7615_mcu_set_tx_ba to v2 format
721673759d82 mt76: mt7615: switch mt7615_mcu_set_rx_ba to v2 format
Signed-off-by: Felix Fietkau <nbd@nbd.name>
John Crispin [Sun, 15 Dec 2019 22:15:29 +0000 (23:15 +0100)]
mediatek: add wmac devicetree node for MT7622
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Sun, 2 Feb 2020 17:46:00 +0000 (18:46 +0100)]
uci: update to version 2020-01-27
e8d8373 file: fix segfault in uci_parse_option
aa5e77a file: fix segfault in uci_parse_config
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Daniel Golle [Sun, 2 Feb 2020 15:47:38 +0000 (17:47 +0200)]
kernel: hwmon: package mcp3021 module
Package kernel module for Linear Technology MCP3021/3221 I2C connected
current and voltage monitor chips.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Wed, 29 Jan 2020 23:00:31 +0000 (00:00 +0100)]
ath79: add common definition for Device/tplink-v2
This adds a shared definition Device/tplink-v2 to common-tp-link.mk.
Though currently only one device in ath79 uses it, putting it in
the common file seems more organized. The definitions are based
on the implementation in ramips target, where a lot of devices
is using tplink-v2-* commands already.
The '-V "ver. 2.0"' suffix for Archer D50 v1 can be removed because
it's default in Build/tplink-v2-image anyway.
While at it, add TPLINK_HWREVADD and TPLINK_HVERSION to DEVICE_VARS,
which seems to have been overlooked when adding Archer D50 v1.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 29 Jan 2020 23:06:38 +0000 (00:06 +0100)]
ath79: rename tplink-loader-okli to tplink-safeloader-okli
This renames Device/tplink-loader-okli to Device/tplink-safeloader-okli
since the latter more accurately describes the combination of
tplink-safeloader and loader-okli use there. The old version might
be confused with other uses of the okli loader.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 29 Jan 2020 22:52:09 +0000 (23:52 +0100)]
ath79: rename Device/tplink to Device/tplink-v1
As we have tplink-v2-header and tplink-v2-image recipes as well,
this patch renames the Device/tplink definition to Device/tplink-v1,
as it's using the tplink-v1-* commands. This should provide easier
distinction in the future.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tomasz Maciej Nowak [Fri, 31 Jan 2020 15:46:14 +0000 (16:46 +0100)]
mvebu: image: align subtargets makefile names
Align subtargets makefiles names to actual subtargets.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tomasz Maciej Nowak [Fri, 31 Jan 2020 15:46:13 +0000 (16:46 +0100)]
mvebu: image: sort devices alphabetically
This sorts the devices in image Makefiles alphabetically.
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
[fixed sorting in one case, add commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Andreas Böhler [Tue, 28 Jan 2020 15:17:41 +0000 (16:17 +0100)]
ramips: add support for TP-Link RE200 v2
TP-Link RE200 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.
Specifications
--------------
- MediaTek MT7628AN (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- UART header on PCB (57600 8n1)
- 8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled
separately.
MAC addresses
-------------
The MAC address assignment matches stock firmware, i.e.:
LAN : *:0D
2.4G: *:0E
5G : *:0F
Installation
------------
Web Interface
-------------
It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.
Serial console
--------------
Opening the case is quite hard, since it is welded together. Rename the
OpenWrt factory image to "test.bin", then plug in the device and quickly
press "2" to enter flash mode (no line feed). Follow the prompts until
OpenWrt is installed.
Unfortunately, this devices does not offer a recovery mode or a tftp
installation method. If the web interface upgrade fails, you have to open
your device and attach serial console.
Additonal notes
---------------
It is possible to flash back to stock by using tplink-safeloader to create
a sysupgrade image based on a stock update. After the first boot, it is
necessary upgrade to another stock image, otherwise subsequent boots
fail with LZMA ERROR 1 and you have to attach serial to recover the device.
Signed-off-by: Andreas Böhler <dev@aboehler.at>
[remove DEVICE_VARS change]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 29 Jan 2020 17:21:53 +0000 (18:21 +0100)]
ramips: collect and harmonize TP-Link image variants in common file
This moves the various variants of common device definitions for
TP-Link devices to a common Makefile common-tp-link.mk. This
provides the opportunity to reorganize and move parameters between
individual device definitions and the common ones.
While at it, also use the common definitions for previously
independent definitions where appropriate.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Álvaro Fernández Rojas [Sat, 1 Feb 2020 09:54:00 +0000 (10:54 +0100)]
cypress-firmware: update to v4.14.77-2020_0115
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Kevin Darbyshire-Bryant [Tue, 3 Dec 2019 14:00:05 +0000 (14:00 +0000)]
kernel: connmark set-dscpmark follow upstreamimg attempt
I'm having another attempt at trying to getting the 'store dscp into
conntrack connmark' functionality into upstream kernel, since the
restore function (act_ctinfo) has been accepted.
The syntax has changed from 'savedscp' to 'set-dscpmark' since that
conforms more closely with existing functionality.
4.14 backport is more of a hack since the structure versioning
mechanism isn't in place.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Kevin Darbyshire-Bryant [Tue, 3 Dec 2019 10:35:08 +0000 (10:35 +0000)]
iptables: set-dscpmark follow upstreamimg attempt
I'm having another attempt at trying to getting the 'store dscp into
conntrack connmark' functionality into upstream kernel, since the
restore function (act_ctinfo) has been accepted.
The syntax has changed from 'savedscp' to 'set-dscpmark' since that
conforms more closely with existing functionality.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Roger Pueyo Centelles [Wed, 18 Sep 2019 13:17:56 +0000 (15:17 +0200)]
ath79: add support for Ubiquiti NanoStation Loco M (XW)
This commit adds support for the NanoStation Loco M2/M5 XW devices
on the ath79 target (support was long ago available on ar71xx).
Specifications:
- AR9342 SoC @ 535 MHz
- 64 MB RAM
- 8 MB SPI flash
- 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in
- AR8032 switch
- 2T2R 5 GHz radio, 22 dBm
- 13 dBi built-in antenna
- POWER/LAN green LEDs
- 4x RSSI LEDs (red, orange, green, green)
- UART (115200 8N1) on PCB
Flashing via TFTP:
- Use a pointy tool (e.g., pen cap, paper clip) and keep the reset
button on the device or on the PoE supply pressed
- Power on the device via PoE (keep reset button pressed)
- Keep pressing until LEDs flash alternatively LED1+LED3 =>
LED2+LED4 => LED1+LED3, etc.
- Release reset button
- The device starts a TFTP server at 192.168.1.20
- Set a static IP on the computer (e.g., 192.168.1.21/24)
- Upload via tftp the factory image:
$ tftp 192.168.1.20
tftp> bin
tftp> trace
tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanostation-loco-m-xw-squashfs-factory.bin
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Adrian Schmutzler [Mon, 27 Jan 2020 14:36:32 +0000 (15:36 +0100)]
ath79: do not set inherited phy-mode/status properties again
There are several cases where phy-mode and status properties are
set again in DTS(I) files although those were set to the same values
in parent DTSI files already. Remove those cases (and thus also stop
their proliferation by copy/paste).
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 27 Jan 2020 13:15:56 +0000 (14:15 +0100)]
ath79: harmonize ethernet-phy naming scheme
A minority of ethernet-phy definitions seems to use numbers in label,
name and reg property relatively random. This patch aligns their
use to have the same numeric value for all of them.
While at it, improve order of properties/add newlines for the ethX
nodes where necessary.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 30 Jan 2020 17:55:21 +0000 (18:55 +0100)]
mediatek: mt7623: remove left-over fragments of mt7623a-rfb-emmc
The image creation for the mt7623a-rfb-emmc has been removed during
a patch refresh without specific comment. The corresponding base-files
entries and DTS patches for 4.14 are still there.
Since mt7623 is pretty dead and nobody has missed this device, let's
just remove the rest.
Fixes: 050da2107a7e ("mediatek: backport upstream mediatek patches")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: John Crispin <john@phrozen.org>
Jan Alexander [Wed, 29 Jan 2020 14:03:18 +0000 (15:03 +0100)]
ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5
This converts the TP-Link TL-MR3020v3 board to use the WLAN throughput
LED trigger in order to react to all VAPs.
It also moves the WLAN trigger config of the TP-Link TL-WA801NDv5 to the
DTS and merges the now identical LAN LED configs.
Verified these changes on a TL-MR3020v3.
Signed-off-by: Jan Alexander <jan@nalx.net>
[changed commit title and extended commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bauer [Thu, 30 Jan 2020 11:37:28 +0000 (12:37 +0100)]
Revert "ramips: fix NETGEAR R6260 EEPROM offset"
This reverts commit
4716c843d62a5a4c37e7886f54bcf446aa26e786.
Netgear seems to use different partition layouts on the R6260, which
would require us to dynamically detect the position of (at least) the
factory partition.
Revert this fix to avoid breaking existing installations until a better
solution has been worked out.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Thu, 30 Jan 2020 09:31:26 +0000 (11:31 +0200)]
kernel: add support for XTX xt25f128 SPI-NOR flash chips
This fixes support for Teltonika RUT9xx which in recent versions of
the device uses xt25f128b flash.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Wed, 29 Jan 2020 19:27:25 +0000 (20:27 +0100)]
ramips: remove duplicate DEVICE_PACKAGES for TP-Link Archer C20i
DEVICE_PACKAGES is specified twice for the same device. Remove the
first (=older) assignment.
Fixes: 40692f0fb55c ("ramips: mt7620: select only the matching mt76 driver")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 8 Dec 2019 19:18:58 +0000 (20:18 +0100)]
ath79: add support for GL.iNet 6408/6416 (GL.iNet V1)
This ports the GL.iNet 6408/6416 from ar71xx.
The GL-Connect GL.iNet v1 routers are basically a TP-Link TL-WR710N with
more DRAM/Flash and console/GPIO header in the same small form-factor.
Specifications:
- SoC: Atheros AR9331
- CPU: 400 MHz
- Flash: 8/16 MiB
- RAM: 64 MiB
- WiFi: 2.4 GHz b/g/n (SoC)
- Ethernet: 2x 100M ports (LAN/WAN)
- USB: 1x 2.0
The difference between 6408 and 6416 is just the flash size. It looks like
only the 16 MiB version has been advertised, while the 6408 is a modified
version. There are also 1-port versions sold by third parties.
Installation:
Install the sysupgrade image via stock firmware GUI or upload it via uboot
(web-based). The device will be available at 192.168.1.1.
Attention: In ar71xx, the same board name is used for both flash versions.
So, please make sure you flash the correct ath79 image when upgrading.
This has been device-tested on a GL.iNet 6416.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Jo-Philipp Wich [Sat, 25 Jan 2020 13:27:10 +0000 (14:27 +0100)]
opkg: update to latest Git HEAD
80d161e opkg: Fix -Wformat-overflow warning
c09fe20 libopkg: fix skipping of leading whitespace when parsing checksums
Fixes: CVE-2020-7982
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
David Bauer [Tue, 28 Jan 2020 20:19:16 +0000 (21:19 +0100)]
ramips: fix NETGEAR R6260 EEPROM offset
The EEPROM offset for the NETGEAR R6260 is incorrect, thus no valid
calibration data is used.
Fix this only for the NETGEAR R6260, as it's currently unknown whether
or not other boards are affected.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sun, 5 Jan 2020 23:31:24 +0000 (00:31 +0100)]
ramips: add support for GL.iNet microuter-N300
The GL.iNet microuter-N300 (internally referred as MT300N-v4) is a
pocket-size travel router. It is essentially identical to the VIXMINI
(internally referred as MT300N-v3) but with double the RAM and
SPI-flash.
Additionally, set the label-mac for both the VIXMINI as well as the
microuter-N300.
Hardware
--------
SoC: MediaTek MT7628NN
RAM: 128M DDR2
FLASH: 16M
LED: Power - WLAN
BTN: Reset
UART: 115200 8N1
TX and RX are labled on the board as pads next to the SoC
Installation via web-interface
------------------------------
1. Visit the web-interface at 192.168.8.1
Note: The ethernet port is by default WAN. So you need to connect to
the router via WiFi
2. Navigate to the Update tab on the left side.
3. Select "Local Update"
4. Upload the OpenWrt sysupgrade image.
Note: Make sure you select not to preserve the configuration.
Installation via U-Boot
-----------------------
1. Hold down the reset button while powering on the device.
Wait for the LED to flash 5 times.
2. Assign yourself a static IPv4 in 192.168.1.0/24
3. Upload the OpenWrt sysupgrade image at 192.168.1.1.
Signed-off-by: David Bauer <mail@david-bauer.net>
Felix Fietkau [Tue, 28 Jan 2020 15:27:53 +0000 (16:27 +0100)]
hostapd: add back support for passing CSA events from sta/mesh to AP interfaces
Fixes handling CSA when using AP+STA or AP+Mesh
This change was accidentally dropped in commit
167028b75
("hostapd: Update to version 2.9 (2019-08-08)")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 18 Jan 2020 17:44:00 +0000 (18:44 +0100)]
mac80211: backport airtime queue limits support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 18 Jan 2020 17:41:08 +0000 (18:41 +0100)]
mac80211: backport fix for an no-ack tx status issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jason A. Donenfeld [Tue, 28 Jan 2020 15:55:16 +0000 (16:55 +0100)]
wireguard: bump to 0.0.
20200128
This fixes a few small oversights for the 5.5 compat layer.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Felix Fietkau [Tue, 28 Jan 2020 13:12:08 +0000 (14:12 +0100)]
hostapd: unconditionally enable ap/mesh for wpa-cli
Without this change, wpa-cli features depend on which wpad build variant was
used to build the wpa-cli package
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Adrian Schmutzler [Sat, 18 Jan 2020 01:18:49 +0000 (02:18 +0100)]
octeon: apply vendor_model scheme to device definition/image name
This updates the device definition name for octeon target to provide
more useful names for the images and be consistent with the increasing
number of targets following that scheme.
Since the target is not using device tree yet, this does not touch
board_name and thus sets BOARD_NAME in image Makefile to ensure
sysupgrade is still working.
While at it, move Build block before Device blocks and remove trailing
whitespace for CMDLINE.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Tue, 14 Jan 2020 14:38:51 +0000 (15:38 +0100)]
mediatek: use consistent naming scheme for device nodes
This harmonizes the device node names (and thus the image names, too)
between subtargets of the mediatek target. So far, each subtarget
has somewhat used its own naming scheme. Now, we use the vendor_device
syntax there, too.
Since DTS names have different patterns and the target only contains
a few devices, this does not replace DEVICE_DTS by a calculated
default value (like for other targets).
SUPPORTED_DEVICES is adjusted based on the node rename where necessary,
though it looks like for several older devices it was not set up
correctly so far.
While at it, this also changes the DTS name for u7623-02-emmc-512m
to all-lower-case.
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 24 Jan 2020 22:40:22 +0000 (23:40 +0100)]
kernel: use older kernel for explicitly setting dependencies
It is generally more desirable to use older kernel versions for
dependencies, as this will require less changes when newer kernels
are added (they will by default select the newer packages).
Since we currently only have two kernels (4.14 and 4.19) in master,
this patch applies this logic by converting all LINUX_4_19 symbols
to their inverted LINUX_4_14 equivalents.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sven Roederer [Wed, 25 Dec 2019 17:46:14 +0000 (18:46 +0100)]
hostapd: remove some bashisms
"[[" is a bash extension for test. As the ash-implementation is not
fully compatible we drop its usage.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
[remove shebang, slightly facelift commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sven Roederer [Wed, 25 Dec 2019 17:43:45 +0000 (18:43 +0100)]
6in4/6in4.sh: remove some bashism (usage of [[)
"[[" is a bash extension for test. As the ash-implementation is not
fully compatible we drop its usage.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Sven Roederer [Wed, 25 Dec 2019 17:42:13 +0000 (18:42 +0100)]
netifd/config.sh: remove some bashism (usage of [[)
"[[" is a bash extension for test. As the ash-implementation is not
fully compatible we drop its usage.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Sven Roederer [Wed, 25 Dec 2019 17:39:00 +0000 (18:39 +0100)]
mvebu: remove bashism
"[[" is a bash extension for test. As the ash-implementation is not
fully compatible we drop its usage.
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
[split patch, remove shebang, adjust commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Sven Roederer [Wed, 25 Dec 2019 17:39:00 +0000 (18:39 +0100)]
base-files: remove some bashisms
"[[" is a bash extension for test. As the ash-implementation is
not fully compatible we drop its usage.
Also change to "=" for simple test, which is sufficient. (see
d6ac8ca76c04ed)
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
[split patch, removed shebang]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Hauke Mehrtens [Fri, 17 Jan 2020 17:47:33 +0000 (18:47 +0100)]
build: Add KBUILD_HOSTLDLIBS
In Linux kernel commit
8377bd2b9ee1 ("kbuild: Rename HOST_LOADLIBES to
KBUILD_HOSTLDLIBS") HOST_LOADLIBES was renamed to KBUILD_HOSTLDLIBS.
This patch adapts the OpenWrt kernel build to this new variable. Without
this change the kernel host tools would not link against the libraries
found in the staging directory.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Scott Roberts [Fri, 24 Jan 2020 04:45:53 +0000 (21:45 -0700)]
kernel: sfp: add Nokia SFP fix from net-next
Add Nokia GPON ONT SFP fix for tx_fault in net-next.
Signed-off-by: Scott Roberts <ttocsr@gmail.com>
Martin Schiller [Tue, 21 Jan 2020 09:42:33 +0000 (10:42 +0100)]
lantiq: ltq-ptm: vr9: fix skb handling in ptm_hard_start_xmit()
Call skb_orphan(skb) to call the owner's destructor function and make
the skb unowned.
This is necessary to prevent sk_wmem_alloc of a socket from overflowing,
which leads to ENOBUFS errors on application level.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Magnus Kroken [Sat, 25 Jan 2020 17:33:41 +0000 (18:33 +0100)]
mbedtls: update to 2.16.4
Fixes side channel vulnerabilities in mbed TLS' implementation of ECDSA.
Release announcement:
https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.4-and-2.7.13-released
Security advisory:
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2019-12
Fixes:
* CVE-2019-18222: Side channel attack on ECDSA
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Christian Lamparter [Sun, 26 Jan 2020 00:12:50 +0000 (01:12 +0100)]
ipq40xx: fix misplaced cells-sizes in WPJ419's dts
This patch fixes the occurences of the following warning
message from the dtc:
Warning (reg_format): /soc/spi@
78b5000/flash0@0/partitions/partition@0:reg:
property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sat, 18 Jan 2020 23:00:52 +0000 (00:00 +0100)]
ipq-wifi: drop deprecated .bin support
This patch converts the Qxwlan
E2600AC image away from
the deprecated .bin file and to the new .qca4019 method.
As a result, we no longer need to carry around the
legacy support for handling .bin files.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Yen-Ting-Shen [Fri, 1 Nov 2019 06:00:40 +0000 (14:00 +0800)]
ipq40xx: add support for EnGenius EMD1
SOC: IPQ4018 / QCA Dakota
CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM: 256 MiB
NOR: 32 MiB
ETH: Qualcomm Atheros QCA8072 (1 port)
WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT: RESET Button
LEDS: White, Blue, Red, Orange
Flash instruction:
From EnGenius firmware to OpenWrt firmware:
In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly.
From OpenWrt firmware to EnGenius firmware:
1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
Put the EnGenius firmware in the TFTP server directory on your computer.
2. Power up EMD1. Press 4 and then press any key to enter u-boot.
3. Download EnGenius firmware
(IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img
4. Flash the firmware
(IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script
5. Reboot
(IPQ40xx) # reset
Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com>
[removed BOARD_NAME]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Fredrik Olofsson [Tue, 10 Sep 2019 09:25:53 +0000 (11:25 +0200)]
ipq40xx: Add support for D-Link DAP-2610
Specifications
==============
- SOC: IPQ4018
- RAM: DDR3 256MB
- Flash: SPI NOR 16MB
- WiFi:
- 2.4GHz: IPQ4018, 2x2, front end SKY85303-11
- 5GHz: IPQ4018, 2x2, front end SKY85717-21
- Ethernet: 1x 10/100/1000Mbps, POE 802.3af
- PHY: QCA8072
- UART: GND, blocked, 3.3V, RX, TX / 115200 8N1
- LED: 1x red / green
- Button: 1x reset / factory default
- U-Boot bootloader with tftp and "emergency web server" accessible
using serial port.
Installation
============
Flash factory image from D-Link web UI. Constraints in the D-Link web UI
makes the factory image unnecessarily large. Flash again using
sysupgrade from inside OpenWrt to reclaim some flash space.
Return to stock D-Link firmware
===============================
Partition layout is preserved, and it is possible to return to the stock
firmware simply by downloading it from D-Link and writing it to the
firmware partition.
# mtd -r write dap2610-firmware.bin firmware
Quirks
======
To be flashable from the D-Link http server, the firmware must be larger
then 6MB, and the size in the firmware header must match the actual file
size. Also, the boot loader verifies the checksum of the firmware before
each boot, thus the jffs2 must be after the checksum covered part. This
is solved in the factory image by having the rootfs at the very end of
the image (without pad-rootfs).
The sysupgrade image which does not have to be flashable from the D-Link
web UI may be smaller, and the checksum in the firmware header only
covers the kernel part of the image.
Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
[added WRGG Variables to DEVICE_VARS, squashed spi pinconf/mux,
added emd1's gmac0 config,fix dtc warnings]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Hannu Nyman [Sat, 25 Jan 2020 09:24:38 +0000 (11:24 +0200)]
tools/gmp: update to 6.2.0
Update GNU gmp to version 6.2.0
Release notes: https://gmplib.org/gmp6.2.html
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adrian Schmutzler [Fri, 24 Jan 2020 17:51:36 +0000 (18:51 +0100)]
lantiq: tidy up image/Makefile
This harmonizes indent for Build blocks and removes multiple empty
lines.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 24 Jan 2020 17:48:47 +0000 (18:48 +0100)]
lantiq: fix setting SOC to DEFAULT_SOC
This adds the missing assignment of DEFAULT_SOC to the SOC variable
by default.
Fixes: 09ee51c614d9 ("lantiq: define SOC only once for uniform targets")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 24 Jan 2020 17:38:53 +0000 (18:38 +0100)]
lantiq: define SOC only once for uniform targets
In lantiq there are several subtarget where all devices have the
same value set to the SOC variable for each device individually.
This patch introduces a non-device-dependent variable DEFAULT_SOC,
which is used if no specific SOC is set for a device, and thus reduces
the number of redundant definitions drastically.
This is applied to all subtargets except xway, as only the latter has
two different SOCs.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 24 Jan 2020 17:35:25 +0000 (18:35 +0100)]
lantiq: move DTS_DIR variable out of Device definition
The DTS_DIR variable is not a device variable, thus it should not
be set inside Device/Default but globally.
Fixes: c640370939d7 ("lantiq: use soc_vendor_device scheme on DTS file")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 24 Jan 2020 17:32:11 +0000 (18:32 +0100)]
lantiq: fix model name for BT Home Hub 3 Type A
The number 3 was accidentally removed from the name during split
of DEVICE_TITLE.
Fixes: fd666870582f ("lantiq: split up DEVICE_TITLE")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Tue, 21 Jan 2020 20:54:50 +0000 (21:54 +0100)]
ramips: define SOC only once for uniform targets
In ramips, all devices in mt7621, mt76x8 and rt288x subtarget have
the same value set to the SOC variable for each device individually.
This patch introduces a non-device-dependent variable DEFAULT_SOC,
which is used if no specific SOC is set for a device, and thus reduces
the number of redundant definitions drastically.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Kevin Darbyshire-Bryant [Fri, 24 Jan 2020 14:18:26 +0000 (14:18 +0000)]
kernel: act_ctinfo: really fix backport this time
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Kevin Darbyshire-Bryant [Fri, 24 Jan 2020 13:37:58 +0000 (13:37 +0000)]
kernel: act_ctinfo: fixup build error on 4.14
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Koen Vandeputte [Fri, 24 Jan 2020 10:20:03 +0000 (11:20 +0100)]
kernel: bump 4.19 to 4.19.98
Refreshed all patches.
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Fri, 24 Jan 2020 10:13:35 +0000 (11:13 +0100)]
kernel: bump 4.14 to 4.14.167
Refreshed all patches.
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Kevin Darbyshire-Bryant [Fri, 24 Jan 2020 11:21:47 +0000 (11:21 +0000)]
kernel: act_ctinfo: backport memory leak fix
[ Upstream commit
09d4f10a5e78d76a53e3e584f1e6a701b6d24108 ]
Implement a cleanup method to properly free ci->params
BUG: memory leak
unreferenced object 0xffff88811746e2c0 (size 64):
comm "syz-executor617", pid 7106, jiffies
4294943055 (age 14.250s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c0 34 60 84 ff ff ff ff 00 00 00 00 00 00 00 00 .4`.............
backtrace:
[<
0000000015aa236f>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<
0000000015aa236f>] slab_post_alloc_hook mm/slab.h:586 [inline]
[<
0000000015aa236f>] slab_alloc mm/slab.c:3320 [inline]
[<
0000000015aa236f>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3549
[<
000000002c946bd1>] kmalloc include/linux/slab.h:556 [inline]
[<
000000002c946bd1>] kzalloc include/linux/slab.h:670 [inline]
[<
000000002c946bd1>] tcf_ctinfo_init+0x21a/0x530 net/sched/act_ctinfo.c:236
[<
0000000086952cca>] tcf_action_init_1+0x400/0x5b0 net/sched/act_api.c:944
[<
000000005ab29bf8>] tcf_action_init+0x135/0x1c0 net/sched/act_api.c:1000
[<
00000000392f56f9>] tcf_action_add+0x9a/0x200 net/sched/act_api.c:1410
[<
0000000088f3c5dd>] tc_ctl_action+0x14d/0x1bb net/sched/act_api.c:1465
[<
000000006b39d986>] rtnetlink_rcv_msg+0x178/0x4b0 net/core/rtnetlink.c:5424
[<
00000000fd6ecace>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<
0000000047493d02>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
[<
00000000bdcf8286>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<
00000000bdcf8286>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328
[<
00000000fc5b92d9>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917
[<
00000000da84d076>] sock_sendmsg_nosec net/socket.c:639 [inline]
[<
00000000da84d076>] sock_sendmsg+0x54/0x70 net/socket.c:659
[<
0000000042fb2eee>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330
[<
000000008f23f67e>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384
[<
00000000d838e4f6>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417
[<
00000000289a9cb1>] __do_sys_sendmsg net/socket.c:2426 [inline]
[<
00000000289a9cb1>] __se_sys_sendmsg net/socket.c:2424 [inline]
[<
00000000289a9cb1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Jason A. Donenfeld [Tue, 21 Jan 2020 15:42:58 +0000 (16:42 +0100)]
wireguard-tools: bump to 1.0.
20200121
* Makefile: remove pwd from compile output
* Makefile: add standard 'all' target
* Makefile: evaluate git version lazily
Quality of life improvements for packagers.
* ipc: simplify inflatable buffer and add fuzzer
* fuzz: add generic command argument fuzzer
* fuzz: add set and setconf fuzzers
More fuzzers and a slicker string list implementation. These fuzzers now find
themselves configuring wireguard interfaces from scratch after several million
mutations, which is fun to watch.
* netlink: make sure to clear return value when trying again
Prior, if a dump was interrupted by a concurrent set operation, we'd try
again, but forget to reset an error flag, so we'd keep trying again forever.
Now we do the right thing and succeed when we succeed.
* Makefile: sort inputs to linker so that build is reproducible
Earlier versions of make(1) passed GLOB_NOSORT to glob(3), resulting in the
linker receiving its inputs in a filesystem-dependent order. This screwed up
reproducible builds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Jason A. Donenfeld [Tue, 21 Jan 2020 15:42:57 +0000 (16:42 +0100)]
wireguard: bump to 0.0.
20200121
* Makefile: strip prefixed v from version.h
This fixes a mistake in dmesg output and when parsing the sysfs entry in the
filesystem.
* device: skb_list_walk_safe moved upstream
This is a 5.6 change, which we won't support here, but it does make the code
cleaner, so we make this change to keep things in sync.
* curve25519: x86_64: replace with formally verified implementation
This comes from INRIA's HACL*/Vale. It implements the same algorithm and
implementation strategy as the code it replaces, only this code has been
formally verified, sans the base point multiplication, which uses code
similar to prior, only it uses the formally verified field arithmetic
alongside reproducable ladder generation steps. This doesn't have a
pure-bmi2 version, which means haswell no longer benefits, but the
increased (doubled) code complexity is not worth it for a single
generation of chips that's already old.
Performance-wise, this is around 1% slower on older microarchitectures,
and slightly faster on newer microarchitectures, mainly 10nm ones or
backports of 10nm to 14nm. This implementation is "everest" below:
Xeon E5-2680 v4 (Broadwell)
armfazh: 133340 cycles per call
everest: 133436 cycles per call
Xeon Gold 5120 (Sky Lake Server)
armfazh: 112636 cycles per call
everest: 113906 cycles per call
Core i5-6300U (Sky Lake Client)
armfazh: 116810 cycles per call
everest: 117916 cycles per call
Core i7-7600U (Kaby Lake)
armfazh: 119523 cycles per call
everest: 119040 cycles per call
Core i7-8750H (Coffee Lake)
armfazh: 113914 cycles per call
everest: 113650 cycles per call
Core i9-9880H (Coffee Lake Refresh)
armfazh: 112616 cycles per call
everest: 114082 cycles per call
Core i3-8121U (Cannon Lake)
armfazh: 113202 cycles per call
everest: 111382 cycles per call
Core i7-8265U (Whiskey Lake)
armfazh: 127307 cycles per call
everest: 127697 cycles per call
Core i7-8550U (Kaby Lake Refresh)
armfazh: 127522 cycles per call
everest: 127083 cycles per call
Xeon Platinum 8275CL (Cascade Lake)
armfazh: 114380 cycles per call
everest: 114656 cycles per call
Achieving these kind of results with formally verified code is quite
remarkable, especialy considering that performance is favorable for
newer chips.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
DENG Qingfang [Mon, 20 Jan 2020 17:06:22 +0000 (01:06 +0800)]
ath10k-firmware: fix mirror hash
Fix PKG_MIRROR_HASH hash mismatch.
Fixes: 641a93f0f226 ("ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047")
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Fri, 24 Jan 2020 05:41:56 +0000 (06:41 +0100)]
procd: update to version 2020-01-24
00aafc4f439e procd: show process's exit code
856b5f8be046 state: fix reboot causing shutdown inside LXC container
b44417c20c7f instance: provide error feedback if ujail binary is missing
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Felix Fietkau [Thu, 23 Jan 2020 16:40:06 +0000 (17:40 +0100)]
kernel: fix dst reference leak in flow offload
Fixes a significant amount of leaked memory with lots of connections
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Adrian Schmutzler [Thu, 23 Jan 2020 14:42:48 +0000 (15:42 +0100)]
ath79: fix SUPPORTED_DEVICES not matching ar71xx board names
Based on a script for comparison, this fixes (hopefully) all errors
in SUPPORTED_DEVICES for ar71xx->ath79 upgrade.
Devices where old string is removed as the device does not exist
in ar71xx:
- dlink_dir-859-a1
- tplink_archer-a7-v5
- tplink_cpe510-v3
Devices where string is changed because it did not match the board
name in ar71xx:
- tplink_tl-mr3220-v1
- tplink_tl-mr3420-v1
- tplink_tl-wr2543-v1
- tplink_tl-wr741nd-v4
- tplink_tl-wr841-v7
- ubnt_unifiac-mesh
- ubnt_unifiac-mesh-pro
- ubnt_unifiac-pro
For this device, the correct string could not be found, but we could
not determine the correct one. Thus, the string is removed for now:
- tplink_tl-wr740n-v4
The script for checking this is quite simple (note that newer
entries, i.e. ath79->ath79 upgrade, are displayed as missing):
newpath=target/linux/ath79/image/
oldpath=target/linux/ar71xx/base-files/lib/ar71xx.sh
for s in $(grep -roh "SUPPORTED_DEVICES.*" $newpath | sed 's/SUPPORTED_DEVICES *.= *//'); do
found="Missing"
grep -q -r "\"$s\"" $oldpath && found="Found"
echo "$s: $found."
done
The errors might be filtered by appending 'grep "Missing"' to the script.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 22 Jan 2020 17:06:07 +0000 (18:06 +0100)]
ath79: move lzma-loader to the end of available RAM
In certain cases, the uncompressed initramfs image will overwrite
the lzma-loader, which is currently only 10 MB away from kernel image
start. To prevent this, change LZMA_TEXT_START to 24 MB, so loader
and compressed image have 8 MB at the end of RAM and uncompressed
image has 24 MB available.
This is only enabled for ath79 at the moment, as there we can be sure
that all devices have 32+ MB RAM and TARGET_INITRAMFS_COMPRESSION_LZMA
is not enabled there.
Despite, since lzma-loader is currently build specifically for ath79
anyway, there is no need to re-specify LOADADDR and LZMA_TEXT_START
in image/Makefile, so the values are set directly in
image/lzma-loader/Makefile and the overwrite in image/Makefile is
removed.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Roger Pueyo Centelles [Thu, 28 Nov 2019 11:53:01 +0000 (12:53 +0100)]
ath79: add support for MikroTik RouterBOARD wAP G-5HacT2HnD
This commit adds support for the MikroTik RouterBOARD wAP G-5HacT2HnD
(wAP AC), a small weatherproof dual band, dual-radio 802.11ac
wireless AP with integrated omnidirectional anntennae and one
10/100/1000 Mbps Ethernet port.
See https://mikrotik.com/product/RBwAPG-5HacT2HnD for more info.
Specifications:
- SoC: Qualcomm Atheros QCA9556
- RAM: 64 MB
- Storage: 16 MB NOR
- Wireless:
· Atheros AR9550 (SoC) 802.11b/g/n 2x2:2, 2 dBi antennae
· Qualcomm QCA9880 802.11a/n/ac 3x3:3, 2 dBi antennae
- Ethernet: Atheros AG71xx (SoC, AR8033), 1x 1000/100/10 port,
passive PoE in
Working:
- Board/system detection
- Sysupgrade
- Serial console
- Ethernet
- 2.4 GHz radio
- 5 GHz radio and LED
- Reset button
Not working/Unsupported:
- 2.4 GHz LED
- AP/CAP LED
- ZT2046Q SPI temperature and voltage sensor
This adds the basic features for supporting MikroTik devices:
- a common recipe for mikrotik images in common-mikrotik.mk
- support for minor (MikroTik NOR) split firmware (only for
generic subtarget so far)
Acknowledgments: Robert Marko <robimarko@gmail.com>
Andrew Cameron <apcameron@softhome.net>
Koen Vandeputte <koen.vandeputte@ncentric.com>
Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
David Bauer [Thu, 11 Apr 2019 15:59:44 +0000 (17:59 +0200)]
ath79: allow to override AR8033 SGMII aneg status
In order to make the QCA955x SGMII workaround work, the unsuccessful
SGMII autonegotiation on the AR8033 should not block the PHY
state-machine.
Otherwise, the ag71xx driver never becomes aware of the copper-side
link-establishment and the workaround is never executed.
Signed-off-by: David Bauer <mail@david-bauer.net>
[remove one trailing whitespace per file]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bauer [Thu, 11 Apr 2019 15:59:43 +0000 (17:59 +0200)]
ath79: add QCA955x SGMII link loss workaround
This commit adds a workaround for the loss of the SGMII link observed on
the QCA955x generation of SoCs. The workaround originates part from the
U-Boot source code, part from the implementation from AVM found in the
GPL tarball for the AVM FRITZ!WLAN Repeater 450E.
The bug results in a stuck SGMII link between the PHY device and the SoC
side. This has only been observed with the Atheros AR8033 PHY and most
likely all devices using such combination are affected.
It is worked around by reading a hidden SGMII status register and
issuing a SGMII PHY reset until the link becomes useable again.
Signed-off-by: David Bauer <mail@david-bauer.net>
Roger Pueyo Centelles [Thu, 28 Nov 2019 12:29:12 +0000 (13:29 +0100)]
rbextract: support devices directly showing ERD magic
Older ath79-based MikroTik devices have the ERD calibration data
compressed and stored different to newer IPQ40xx ones. This commit
adds support for these former ones.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Roger Pueyo Centelles [Thu, 28 Nov 2019 12:23:34 +0000 (13:23 +0100)]
rbextract: add package
This utility extracts the radio calibration data, as well as other
board-related information (model, serial number, etc.), from MikroTik
Routerboard devices' flash.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Roger Pueyo Centelles [Thu, 28 Nov 2019 12:11:59 +0000 (13:11 +0100)]
rbcfg: make package available for ath79
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
projects / openwrt / staging / adrian.git / log