drm/msm/gpu: Remove unused bus scaling code

Remove the downstream bus scaling code. It isn't needed for for
compatibility with a downstream or vendor kernel. Get it out of the
way to clear space for devfreq support.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/adreno: Remove a useless call to dev_pm_opp_get_freq()

Calling dev_pm_opp_find_freq_floor() returns the matched frequency
in 'freq'.  We don't need to call dev_pm_opp_get_freq() again
to get the frequency value.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/adreno: Call dev_pm_opp_put()

We need to call dev_pm_opp_put() to put back the reference
for the OPP struct after calling the various dev_pm_opp_get_*
functions.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: Fix NULL deref in adreno_load_gpu

The msm/kms driver should work even if there is no GPU device specified
in DT. Currently, we get a NULL dereference crash in adreno_load_gpu
since the driver assumes that priv->gpu_pdev is non-NULL.

Perform an additional check on priv->gpu_pdev before trying to retrieve
the msm_gpu pointer from it.

v2: Incorporate Jordan's comments:
- Simplify the check to share the same error message.
- Use dev_err_once() to avoid an error message every time we open the
  drm device fd.

Fixes: eec874ce5ff1 (drm/msm/adreno: load gpu at probe/bind time)
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: gpu: Only sync fences on rings that exist

The fault recovery code tries to sync fences on all possible rings
instead of only the rings that actually exist which will fault the
kernel when the number of rings are less than the maximum amount.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: fix leak in failed get_pages

get_pages doesn't keep a reference of the pages allocated
when it fails later in the code path. This can lead to
a memory leak. Keep reference of the allocated pages so
that it can be freed when msm_gem_free_object gets called
later during cleanup.

Signed-off-by: Prakash Kamliya <pkamliya@codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: avoid false-positive -Wmaybe-uninitialized warning

gcc-8 -fsanitize-coverage=trace-pc produces a false-positive warning:

drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c: In function 'mdp5_plane_mode_set.isra.8':
drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:1053:3: error: 'crtc_x_r' may be used uninitialized in this function [-Werror=maybe-uninitialized]

It's relatively clear from reading the source that this cannot happen,
and older compilers get it right. This rearranges the code remove
the two affected variables, which reliably avoids the problem.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/mdp4: Deduplicate bus_find_device() by name matching

No need to reinvent the wheel, we have bus_find_device_by_name().

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: add missing MODULE_FIRMWARE declarations

* some a5xx files were missing
* fixup for an existing typo

Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: update adreno firmware path in MODULE_FIRMWARE

The preferred location for Adreno firmware files is now in qcom/ subfolder,
especially now that we are adding some of them in linux-firmware.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: free kstrdup'd cmdline

Fixes: 18bb8a6 'drm/msm: show task cmdline in gpu recovery messages'
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: fix msm_rd_dump_submit prototype

The prototype of msm_rd_dump_submit() has recently changed. However,
we have two declarations of this functions, and the other one
remains the old version, leading to this:

drivers/gpu/drm/msm/msm_gpu.c: In function 'recover_worker':
drivers/gpu/drm/msm/msm_gpu.c:295:23: error: passing argument 1 of 'msm_rd_dump_submit' from incompatible pointer type [-Werror=incompatible-pointer-types]

This changes the second one to match the first again.

Fixes: 2165e2b9cba2 ("drm/msm: split rd debugfs file")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm: fix spelling mistake: "ringubffer" -> "ringbuffer"

Trivial fix to spelling mistake in DRM_DEV_ERROR error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/qxl: reapply cursor after resetting primary

QXL associates mouse state with its primary plane.

Destroying a primary plane and putting a new one in place has the side
effect of destroying the cursor as well.

This commit changes the driver to reapply the cursor any time a new
primary is created. It achieves this by keeping a reference to the
cursor bo on the qxl_crtc struct.

This fix is very similar to

commit 4532b241a4b7 ("drm/qxl: reapply cursor after SetCrtc calls")

which got implicitly reverted as part of implementing the atomic
modeset feature.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1512097
Fixes: 1277eed5fecb ("drm: qxl: Atomic phase 1: convert cursor to universal plane")
Cc: stable@vger.kernel.org
Signed-off-by: Ray Strode <rstrode@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/qxl: unref cursor bo when finished with it

qxl_cursor_atomic_update allocs a bo for the cursor that
it never frees up at the end of the function.

This commit fixes that.

Signed-off-by: Ray Strode <rstrode@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

[airlied: fix conflict in intel_dsi.c]

drm-intel-next-2017-12-01:

- Init clock gate fix (Ville)
- Execlists event handling corrections (Chris, Michel)
- Improvements on GPU Cache invalidation and context switch (Chris)
- More perf OA changes (Lionel)
- More selftests improvements and fixes (Chris, Matthew)
- Clean-up on modules parameters (Chris)
- Clean-up around old ringbuffer submission and hw semaphore on old platforms (Chris)
- More Cannonlake stabilization effort (David, James)
- Display planes clean-up and improvements (Ville)
- New PMU interface for perf queries... (Tvrtko)
- ... and other subsequent PMU changes and fixes (Tvrtko, Chris)
- Remove success dmesg noise from rotation (Chris)
- New DMC for Kabylake (Anusha)
- Fixes around atomic commits (Daniel)
- GuC updates and fixes (Sagar, Michal, Chris)
- Couple gmbus/i2c fixes (Ville)
- Use exponential backoff for all our wait_for() (Chris)
- Fixes for i915/fbdev (Chris)
- Backlight fixes (Arnd)
- Updates on shrinker (Chris)
- Make Hotplug enable more robuts (Chris)
- Disable huge pages (TPH) on lack of a needed workaround (Joonas)
- New GuC images for SKL, KBL, BXT (Sagar)
- Add HW Workaround for Geminilake performance (Valtteri)
- Fixes for PPS timings (Imre)
- More IPS fixes (Maarten)
- Many fixes for Display Port on gen2-gen4 (Ville)
- Retry GPU reset making the recover from hang more robust (Chris)

* tag 'drm-intel-next-2017-12-01' of git://anongit.freedesktop.org/drm/drm-intel: (101 commits)
  drm/i915: Update DRIVER_DATE to 20171201
  drm/i915/cnl: Mask previous DDI - PLL mapping
  drm/i915: Remove unsafe i915.enable_rc6
  drm/i915: Sleep and retry a GPU reset if at first we don't succeed
  drm/i915: Interlaced DP output doesn't work on VLV/CHV
  drm/i915: Pass crtc state to intel_pipe_{enable,disable}()
  drm/i915: Wait for pipe to start on i830 as well
  drm/i915: Fix vblank timestamp/frame counter jumps on gen2
  drm/i915: Fix deadlock in i830_disable_pipe()
  drm/i915: Fix has_audio readout for DDI A
  drm/i915: Don't add the "force audio" property to DP connectors that don't support audio
  drm/i915: Disable DP audio for g4x
  drm/i915/selftests: Wake the device before executing requests on the GPU
  drm/i915: Set fake_vma.size as well as fake_vma.node.size for capture
  drm/i915: Tidy up signed/unsigned comparison
  drm/i915: Enable IPS with only sprite plane visible too, v4.
  drm/i915: Make ips_enabled a property depending on whether IPS is enabled, v3.
  drm/i915: Avoid PPS HW/SW state mismatch due to rounding
  drm/i915: Skip switch-to-kernel-context on suspend when wedged
  drm/i915/glk: Apply WaProgramL3SqcReg1DefaultForPerf for GLK too
  ...

Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

UAPI Changes:

- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)

Core Changes:

- misc doc and bug fixes

Driver Changes:

- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)

* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
  drm/sun4i: Fix uninitialized variables in vi layer
  drm/fb-helper: Fix potential NULL pointer dereference
  gpu: drm: stm: Adopt SPDX identifiers
  gpu: drm: sti: Adopt SPDX identifiers
  drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
  drm/sun4i: Wire in DE2 YUV support
  drm/sun4i: Expand DE2 scaler lib with YUV support
  drm/sun4i: Add DE2 definitions for YUV formats
  drm/sun4i: Add DE2 CSC library
  drm/sun4i: Add CCSC property to DE2 configuration
  drm/sun4i: Add support for HW scaling to DE2
  drm/sun4i: Add scaler configuration to DE2 mixers
  drm/sun4i: Add support for DE2 VI planes
  drm/sun4i: Reorganize UI layer code in DE2
  drm/sun4i: Add support for all HW supported DE2 RGB formats
  drm/sun4i: Add multi plane support to DE2 driver
  drm/sun4i: Move interlace related code in DE2
  drm/sun4i: Move channel size related code in DE2
  drm/sun4i: Move line width setting in DE2
  drm/sun4i: Use values calculated by atomic check
  ...

drm/sun4i: Fix uninitialized variables in vi layer

min_scale and max_scale in sun8i_vi_layer_atomic_check() can be used
without initialization.

Fix that.

Fixes: b862a648de3b ("drm/sun4i: Add support for HW scaling to DE2")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206152603.25937-1-jernej.skrabec@siol.net

drm/fb-helper: Fix potential NULL pointer dereference

fb_helper is being dereferenced before it is null checked,
hence there is a potential null pointer dereference.

Fix this by moving the pointer dereference after fb_helper
has been null checked.

This issue was detected with the help of Coccinelle.

Fixes: c777990fb45b ("drm/fb-helper: Handle function NULL argument")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171205174628.GA31189@embeddedor.com

Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next

First feature request for 4.16.  Highlights:
- RV and Vega header cleanups
- TTM operation context support
- 48 bit GPUVM fixes for Vega/RV
- More smatch fixes
- ECC support for vega10
- Resizeable BAR support
- Multi-display sync support in DC
- SR-IOV fixes
- Various scheduler improvements
- GPU reset fixes and vram lost tracking
- Clean up DC/powerplay interfaces
- DCN display fixes
- Various DC fixes

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (291 commits)
  drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()
  drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()
  drm/amd/display: Use drm_fb_helper_poll_changed()
  drm/ttm: swap consecutive allocated pooled pages v4
  drm/amdgpu: fix amdgpu_sync_resv v2
  drm/ttm: swap consecutive allocated cached pages v3
  drm/amd/amdgpu: set gtt size according to system memory size only
  drm/amdgpu: Get rid of dep_sync as a seperate object.
  drm/amdgpu: allow specifying vm_block_size for multi level PDs v2
  drm/amdgpu: move validation of the VM size into the VM code
  drm/amdgpu: allow non pot VM size values
  drm/amdgpu: choose number of VM levels based on VM size
  drm/amdgpu: unify VM size handling of Vega10 with older generation
  drm/amdgpu: fix amdgpu_vm_num_entries
  drm/amdgpu: fix VM PD addr shift
  drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)
  drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log
  drm/amd/display: Add dm_logger_append_va API
  drm/ttm: Use a static string instead of an array of char *
  drm/amd/display: remove usage of legacy_cursor_update
  ...

drm/radeon: Use drm_fb_helper_lastclose() and _poll_changed()

This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use drm_fb_helper_lastclose() and _poll_changed()

This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Remove the unused driver implementations.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use drm_fb_helper_poll_changed()

This driver can use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: swap consecutive allocated pooled pages v4

When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.

v2: use swap
v3: check if it's really the first allocated page
v4: don't touch the loop variable

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu_sync_resv v2

Fixes a bug introduced by AMDGPU_GEM_CREATE_EXPLICIT_SYNC. We still need
to wait for pipelined moves in the shared fences list.

v2: fix typo

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: swap consecutive allocated cached pages v3

When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.

v2: use swap
v3: check if it's really the first allocated page

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: set gtt size according to system memory size only

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Get rid of dep_sync as a seperate object.

Instead mark fence as explicit in it's amdgpu_sync_entry.

v2:
Fix use after free bug and add new parameter description.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow specifying vm_block_size for multi level PDs v2

This patch allows specifying the vm_block_size even when multi level
page directories are active.

v2: fix signed/unsigned compare warning

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move validation of the VM size into the VM code

This moves validation of the VM size parameter into amdgpu_vm_adjust_size().

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow non pot VM size values

The VM size actually doesn't need to be a power of two.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: choose number of VM levels based on VM size

This allows us limiting the VM size for testing even of Vega10.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: unify VM size handling of Vega10 with older generation

One function to rule them all.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix amdgpu_vm_num_entries

The block size only affects the leave nodes, everything else is fixed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix VM PD addr shift

The block size only affects the leave nodes, everything else is fixed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct vce4.0 fw config for SRIOV (V2)

1. program vce 4.0 fw with 48 bit address
2. correct vce 4.0 fw stack and date offset

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't call dm_log_to_buffer directly in dc_conn_log

dm_log_to_buffer logs unconditionally, so calling it directly resulted
in the main message being logged even when the event type isn't enabled
in the event mask.

To fix this, use the new dm_logger_append_va API.

Fixes spurious messages like

 [drm] {1920x1200, 2080x1235@154000Khz}

in dmesg when a mode is set.

v2:
* Use new dm_logger_append_va API, fixes incorrect va_list usage in v1
* Just use and decrease entry.buf_offset to get rid of the trailing
  newline

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add dm_logger_append_va API

Same as dm_logger_append, except it takes a va_list instead of a
variable number of arguments. dm_logger_append is now a minimal wrapper
around dm_logger_append_va.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Use a static string instead of an array of char *

Make the object a bit smaller by using a simple string instead
of a format string and array of char *.

$ size drivers/gpu/drm/ttm/ttm_page_alloc_dma.o*
   text    data     bss     dec     hex filename
   8820     216    4136   13172    3374 drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.defconfig.new
   8910     216    4136   13262    33ce drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.defconfig.old
  25383    5044    4384   34811    87fb drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.allyesconfig.new
  25797    5428    4384   35609    8b19 drivers/gpu/drm/ttm/ttm_page_alloc_dma.o.allyesconfig.old

Miscellanea:

o The h array had more entries than were emitted, all are now removed

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove usage of legacy_cursor_update

Currently the atomic check code uses legacy_cursor_update
to differnetiate if the cursor plane is being requested by
the user, which is not required as we shall be updating
plane only if modeset is requested/required.

Have tested cursor plane and underlay get updated seamlessly,
without any lag or frame drops.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 vcn header files.

Cleanup asic_reg/raven1/VCN folder. Remove unused vcn_1_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 thm header files.

Cleanup asic_reg/raven1/THM folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 nbio header files.

Cleanup asic_reg/raven1/NBIO folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 mp header files.

Cleanup asic_reg/raven1/MP folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 mmhub header files.

Cleanup asic_reg/raven1/MMHUB folder.Remove unused mmhub_9_1_default.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 gc header files.

Cleanup asic_reg/raven1/GC folder. Remove unused files:
    gc_9_1_default.h  gc_9_1_sh_mask.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 dcn header files.

Cleanup asic_reg/raven1/DCN folder.Remove unused
dcn_1_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup raven1 sdma header files.

Cleanup asic_reg/raven1/SDMA0 folder.Remove unused sdma0_4_1_sh_mask.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 header files.

Remove asic_reg/vega10 folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 osssys header files.

Cleanup asic_reg/vega10/OSSSYS folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 smuio header files.

Cleanup asic_reg/vega10/SMUIO folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 nbif header files.

Cleanup asic_reg/vega10/NBIF folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 nbio header files.

Cleanup asic_reg/vega10/NBIO folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 mmhub header files.

Cleanup asic_reg/vega10/MMHUB folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 gc header files.

Cleanup asic_reg/vega10/GC folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 vce header files.

Cleanup asic_reg/vega10/VCE folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 uvd header files.

Cleanup asic_reg/vega10/UVD folder,remove unused uvd_7_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 dce header files.

Cleanup asic_reg/vega10/DC folder.Remove dce_12_0_default.h.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include: cleanup vega10 umc header files.

Remove asic/vega10/UMC folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 thm header files.

Cleanup asic_reg/vega10/THM folder.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 athub header files.

Cleanup asic_reg/vega10/ATHUB folder,remove unused files.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 mp header files.

Cleanup asic_reg/vega10/MP folder, remove mp_9_0_default.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 hdp header files.

Cleanup asic_reg/vega10/HDP folder, remove hdp_4_0_default.h

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/include:cleanup vega10 sdma0/1 header files.

To remove include/asic_reg/vega10 folder,create IP folders sdma0/1.
This patch cleanup asic_reg/vega10/SDMA folders.

Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:partially revert 1cfd8e237f0318e330190ac21d63c58ae6a1f66c

found RING0 test fail after S3 resume regression, which is
introduced by 1cfd8e237f0318e330190ac21d63c58ae6a1f66c

Because after suspend VRAM will be cleared, so driver must
unpin the GART table(resident in VRAM) during suspend so it
can be evicted to system ram and must correspondingly pin it
during resume so the GART table could be restored to VRAM.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: roundup the shrink request to prevent skip huge pool

e.g. shrink reqeust is less than 512, the logic will skip huge pool

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add page order support in ttm_pages_put

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add set_pages_wb for handling page order more than zero

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.20

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set OPP default values in init_hw

On S3 resume, we do not reconstruct OPP, but we do need to
reinitialize some of its values to the default ones.
Therefore, move those lines out of the OPP constructor and
into init_hw.

Also reset the hubp power gated flag, since nothing is
power gated at init_hw.

Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.19

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DMCU and ABM maintenance and refactor

Remove some globals that should really be per block state.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only program watermark for full update.

For scaling and position change, it isn't necessary to program
watermark and check P-State as well.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.18

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set full update flag in dcn_validate_bandwidth

Doing bandwidth validation implies that this is a full update. Set the
flag inside the function in case whatever is calling
dcn_validate_bandwidth doesn't set it.

Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not program front-end twice

The sequence of front-end > back-end > front-end programming will
program the front-end more than once. Add a mode_changed flag, and use
it to determine whether the front-end should be programmed before, or
after back-end.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger full update on plane change

With the optimized DCN10 frontend programming code, things are
programmed only when requested. For now, trigger a full update on all
plane changes.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename output_bpc to opp_input_bpc

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix refclk conversion from khz int to mhz float

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix mpo validation failure

There was an error in translation of mode support check.
"N/A" is a failure condition while "" was a special case.
This change will differentiate between the two by using a
define.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move csc matrix to hw_shared

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dal 3.1.17

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update output csc matrix values

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only update output transfer function for full type.

dcn10_translate_regamma_to_hw_format costs 750us to run, it cannot be
called within isr, check update flag before calling, only do it for
full update.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: performance profiling instrumentation

Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary dc_link vtable

None of this needs to be a function table or dynamic in any way.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix opp header register define

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update dchub and dpp as per update flags.

Check update flags and update dchub and dpp as per flags,
reduce reg access from 347 to 200, duration time reduce
to 170us.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Move update_plane_addr to apply_ctx_for_surface for dce.

Move update_plane_addr to apply_ctx_for_surface, address update will
just be called once, not twice for updat type is full and medium.
This will reduce some reg access and duration time.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: call set_mpc_output_csc from hwsequencer

Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix description of module parameter dc_log

It was incorrectly referencing the dc parameter, resulting in an empty
description of the dc_log parameter.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Downgrade DRM_ERROR to DRM_DEBUG in amdgpu_queue_mgr_map

Prevent buggy userspace from spamming dmesg.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: expose the VA above the hole to userspace

Let userspace know how much area we have above the 48bit VA hole on
Vega10.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use dev_dbg instead of dev_err in the VA IOCTL

Userspace buggy userspace can spam the logs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix VA hole handling on Vega10 v3

Similar to the CPU address space the VA on Vega10 has a hole in it.

v2: use dev_dbg instead of dev_err
v3: add some more comments to explain how the hw works

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use the new TTM bytes moved counter v2

Instead of the global statistics use the per context bytes moved counter.

v2: rebased

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: forward operation context to ttm_bo_mem_space

This way we can finally use some more stats.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

staging: vboxvideo: adapt to new TTM interface

Fixes interface changes done in the following commits:
drm/ttm: add operation ctx to ttm_bo_validate v2
drm/ttm: add context to driver move callback as well

I missed this driver because it is in the staging area.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add number of bytes moved to the operation context

Add some statistics how many bytes we have moved.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add context to driver move callback as well

Instead of passing the parameters manually.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>