Michael Chan [Mon, 18 Nov 2019 08:56:36 +0000 (03:56 -0500)]
bnxt_en: Improve RX buffer error handling.
When hardware reports RX buffer errors, the latest 57500 chips do not
require reset. The packet is discarded by the hardware and the
ring will continue to operate.
Also, add an rx_buf_errors counter for this type of error. It can help
the user to identify if the aggregation ring is too small.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 18 Nov 2019 08:56:35 +0000 (03:56 -0500)]
bnxt_en: Update firmware interface spec to 1.10.1.12.
The aRFS ring table interface has changed for the 57500 chips. Updating
it accordingly so it will work with the latest production firmware.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Nov 2019 01:11:54 +0000 (17:11 -0800)]
Merge branch 'selftests-Add-ethtool-and-scale-tests'
Ido Schimmel says:
====================
selftests: Add ethtool and scale tests
This patch set adds generic ethtool tests and a mlxsw-specific router
scale test for Spectrum-2.
Patches #1-#2 from Danielle add the router scale test for Spectrum-2. It
re-uses the same test as Spectrum-1, but it is invoked with a different
scale, according to what it is queried from devlink-resource.
Patches #3-#5 from Amit are a re-work of the ethtool tests that were
posted in the past [1]. Patches #3-#4 add the necessary library
routines, whereas patch #5 adds the test itself. The test checks both
good and bad flows with autoneg on and off. The test plan it detailed in
the commit message.
Last time Andrew and Florian (copied) provided very useful feedback that
is incorporated in this set. Namely:
* Parse the value of the different link modes from
/usr/include/linux/ethtool.h
* Differentiate between supported and advertised speeds and use the
latter in autoneg tests
* Make the test generic and move it to net/forwarding/ instead of being
mlxsw-specific
[1] https://patchwork.ozlabs.org/cover/
1112903/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Mon, 18 Nov 2019 07:50:02 +0000 (09:50 +0200)]
selftests: forwarding: Add speed and auto-negotiation test
Check configurations and packets transference with different variations
of autoneg and speed.
Test plan:
1. Test force of same speed with autoneg off
2. Test force of different speeds with autoneg off (should fail)
3. One side is autoneg on and other side sets force of common speeds
4. One side is autoneg on and other side only advertises a subset of the
common speeds (one speed of the subset)
5. One side is autoneg on and other side only advertises a subset of the
common speeds. Check that highest speed is negotiated
6. Test autoneg on, but each side advertises different speeds (should
fail)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Mon, 18 Nov 2019 07:50:01 +0000 (09:50 +0200)]
selftests: forwarding: lib.sh: Add wait for dev with timeout
Add a function that waits for device with maximum number of iterations.
It enables to limit the waiting and prevent infinite loop.
This will be used by the subsequent patch which will set two ports to
different speeds in order to make sure they cannot negotiate a link.
Waiting for all the setup is limited with 10 minutes for each device.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Mon, 18 Nov 2019 07:50:00 +0000 (09:50 +0200)]
selftests: forwarding: Add ethtool_lib.sh
Functions:
1. speeds_arr_get
The function returns an array of speed values from
/usr/include/linux/ethtool.h The array looks as follows:
[10baseT/Half] = 0,
[10baseT/Full] = 1,
...
2. ethtool_set:
params: cmd
The function runs ethtool by cmd (ethtool -s cmd) and checks if
there was an error in configuration
3. dev_speeds_get:
params: dev, with_mode (0 or 1), adver (0 or 1)
return value: Array of supported/Advertised link modes
with/without mode
* Example 1:
speeds_get swp1 0 0
return: 1000 10000 40000
* Example 2:
speeds_get swp1 1 1
return: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full
4. common_speeds_get:
params: dev1, dev2, with_mode (0 or 1), adver (0 or 1)
return value: Array of common speeds of dev1 and dev2
* Example:
common_speeds_get swp1 swp2 0 0
return: 1000 10000
Assuming that swp1 supports 1000 10000 40000 and swp2 supports
1000 10000
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Mon, 18 Nov 2019 07:49:59 +0000 (09:49 +0200)]
selftests: mlxsw: Check devlink device before running test
The scale test for Spectrum-2 should only be invoked for Spectrum-2.
Skip the test otherwise.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Mon, 18 Nov 2019 07:49:58 +0000 (09:49 +0200)]
selftests: mlxsw: Add router scale test for Spectrum-2
Same as for Spectrum-1, test the ability to add the maximum number of
routes possible to the switch.
Invoke the test from the 'resource_scale' wrapper script.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Nov 2019 01:03:18 +0000 (17:03 -0800)]
Merge branch 'page_pool-followup-changes-to-restore-tracepoint-features'
Jesper Dangaard says:
====================
page_pool: followup changes to restore tracepoint features
This patchset is a followup to Jonathan patch, that do not release
pool until inflight == 0. That changed page_pool to be responsible for
its own delayed destruction instead of relying on xdp memory model.
As the page_pool maintainer, I'm promoting the use of tracepoint to
troubleshoot and help driver developers verify correctness when
converting at driver to use page_pool. The role of xdp:mem_disconnect
have changed, which broke my bpftrace tools for shutdown verification.
With these changes, the same capabilities are regained.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Sat, 16 Nov 2019 11:22:48 +0000 (12:22 +0100)]
page_pool: extend tracepoint to also include the page PFN
The MM tracepoint for page free (called kmem:mm_page_free) doesn't provide
the page pointer directly, instead it provides the PFN (Page Frame Number).
This is annoying when writing a page_pool leak detector in BPF.
This patch change page_pool tracepoints to also provide the PFN.
The page pointer is still provided to allow other kinds of
troubleshooting from BPF.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Sat, 16 Nov 2019 11:22:43 +0000 (12:22 +0100)]
page_pool: add destroy attempts counter and rename tracepoint
When Jonathan change the page_pool to become responsible to its
own shutdown via deferred work queue, then the disconnect_cnt
counter was removed from xdp memory model tracepoint.
This patch change the page_pool_inflight tracepoint name to
page_pool_release, because it reflects the new responsability
better. And it reintroduces a counter that reflect the number of
times page_pool_release have been tried.
The counter is also used by the code, to only empty the alloc
cache once. With a stuck work queue running every second and
counter being 64-bit, it will overrun in approx 584 billion
years. For comparison, Earth lifetime expectancy is 7.5 billion
years, before the Sun will engulf, and destroy, the Earth.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer [Sat, 16 Nov 2019 11:22:38 +0000 (12:22 +0100)]
xdp: remove memory poison on free for struct xdp_mem_allocator
When looking at the details I realised that the memory poison in
__xdp_mem_allocator_rcu_free doesn't make sense. This is because the
SLUB allocator uses the first 16 bytes (on 64 bit), for its freelist,
which overlap with members in struct xdp_mem_allocator, that were
updated. Thus, SLUB already does the "poisoning" for us.
I still believe that poisoning memory make sense in other cases.
Kernel have gained different use-after-free detection mechanism, but
enabling those is associated with a huge overhead. Experience is that
debugging facilities can change the timing so much, that that a race
condition will not be provoked when enabled. Thus, I'm still in favour
of poisoning memory where it makes sense.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 20:08:37 +0000 (20:08 +0000)]
net: phy: avoid matching all-ones clause 45 PHY IDs
We currently match clause 45 PHYs using any ID read from a MMD marked
as present in the "Devices in package" registers 5 and 6. However,
this is incorrect. 45.2 says:
"The definition of the term package is vendor specific and could be
a chip, module, or other similar entity."
so a package could be more or less than the whole PHY - a PHY could be
made up of several modules instantiated onto a single chip such as the
Marvell 88x3310, or some of the MMDs could be disabled according to
chip configuration, such as the Broadcom 84881.
In the case of Broadcom 84881, the "Devices in package" registers
contain 0xc000009b, meaning that there is a PHYXS present in the
package, but all registers in MMD 4 return 0xffff. This leads to our
matching code incorrectly binding this PHY to one of our generic PHY
drivers.
This patch changes the way we determine whether to attempt to match a
MMD identifier, or use it to request a module - if the identifier is
all-ones, then we skip over it. When reading the identifiers, we
initialise phydev->c45_ids.device_ids to all-ones, only reading the
device ID if the "Devices in package" registers indicates we should.
This avoids the generic drivers incorrectly matching on a PHY ID of
0xffffffff.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Nov 2019 00:56:13 +0000 (16:56 -0800)]
Merge branch 'Add-support-for-SFPs-behind-PHYs'
Russell King says:
====================
Add support for SFPs behind PHYs
This series adds partial support for SFP cages connected to PHYs,
specifically optical SFPs.
We add core infrastructure to phylib for this, and arrange for
minimal code in the PHY driver - currently, this is code to verify
that the module is one that we can support for Marvell 10G PHYs.
v2: add yaml binding patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 19:56:56 +0000 (19:56 +0000)]
net: phy: marvell10g: add SFP+ support
Add support for SFP+ cages to the Marvell 10G PHY driver. This is
slightly complicated by the way phylib works in that we need to use
a multi-step process to attach the SFP bus, and we also need to track
the phylink state machine to know when the module's transmit disable
signal should change state.
With appropriate DT changes, this allows the SFP+ canges on the
Macchiatobin platform to be functional.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 19:56:51 +0000 (19:56 +0000)]
net: phy: add core phylib sfp support
Add core phylib help for supporting SFP sockets on PHYs. This provides
a mechanism to inform the SFP layer about PHY up/down events, and also
unregister the SFP bus when the PHY is going away.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 19:56:46 +0000 (19:56 +0000)]
dt-bindings: net: add ethernet controller and phy sfp property
Document the missing sfp property for ethernet controllers (which
has existed for some time) which is being extended to ethernet PHYs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 19 Nov 2019 00:43:05 +0000 (16:43 -0800)]
Merge git://git./linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Wildcard support for the net,iface set from Kristian Evensen.
2) Offload support for matching on the input interface.
3) Simplify matching on vlan header fields.
4) Add nft_payload_rebuild_vlan_hdr() function to rebuild the vlan
header from the vlan sk_buff metadata.
5) Pass extack to nft_flow_cls_offload_setup().
6) Add C-VLAN matching support.
7) Use time64_t in xt_time to fix y2038 overflow, from Arnd Bergmann.
8) Use time_t in nft_meta to fix y2038 overflow, also from Arnd.
9) Add flow_action_entry_next() helper function to flowtable offload
infrastructure.
10) Add IPv6 support to the flowtable offload infrastructure.
11) Support for input interface matching from postrouting,
from Phil Sutter.
12) Missing check for ndo callback in flowtable offload, from wenxu.
13) Remove conntrack parameter from flow_offload_fill_dir(), from wenxu.
14) Do not pass flow_rule object for rule removal, cookie is sufficient
to achieve this.
15) Release flow_rule object in case of error from the offload commit
path.
16) Undo offload ruleset updates if transaction fails.
17) Check for error when binding flowtable callbacks, from wenxu.
18) Always unbind flowtable callbacks when unregistering hooks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 17 Nov 2019 02:47:31 +0000 (18:47 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Lots of overlapping changes and parallel additions, stuff
like that.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 17 Nov 2019 02:14:32 +0000 (18:14 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This reverts a number of changes to the khwrng thread which feeds the
kernel random number pool from hwrng drivers. They were trying to fix
issues with suspend-and-resume but ended up causing regressions"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "hwrng: core - Freeze khwrng thread during suspend"
Herbert Xu [Sun, 17 Nov 2019 00:48:17 +0000 (08:48 +0800)]
Revert "hwrng: core - Freeze khwrng thread during suspend"
This reverts commit
03a3bb7ae631 ("hwrng: core - Freeze khwrng
thread during suspend"),
ff296293b353 ("random: Support freezable
kthreads in add_hwgenerator_randomness()") and
59b569480dc8 ("random:
Use wait_event_freezable() in add_hwgenerator_randomness()").
These patches introduced regressions and we need more time to
get them ready for mainline.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sun, 17 Nov 2019 00:10:59 +0000 (16:10 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes: disable unreliable HPET on Intel Coffe Lake platforms, and
fix a lockdep splat in the resctrl code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix potential lockdep warning
x86/quirks: Disable HPET on Intel Coffe Lake platforms
Linus Torvalds [Sun, 17 Nov 2019 00:08:46 +0000 (16:08 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix integer truncation bug in __do_adjtimex()"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp/y2038: Remove incorrect time_t truncation
Linus Torvalds [Sat, 16 Nov 2019 23:56:01 +0000 (15:56 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixes: a handful of AUX event handling related fixes, a Sparse
fix and two ABI fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing static inline on perf_cgroup_switch()
perf/core: Consistently fail fork on allocation failures
perf/aux: Disallow aux_output for kernel events
perf/core: Reattach a misplaced comment
perf/aux: Fix the aux_output group inheritance fix
perf/core: Disallow uncore-cgroup events
Linus Torvalds [Sat, 16 Nov 2019 23:52:00 +0000 (15:52 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix memory leak in xfrm_state code, from Steffen Klassert.
2) Fix races between devlink reload operations and device
setup/cleanup, from Jiri Pirko.
3) Null deref in NFC code, from Stephan Gerhold.
4) Refcount fixes in SMC, from Ursula Braun.
5) Memory leak in slcan open error paths, from Jouni Hogander.
6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
7) Info leak on short USB request answers in ax88172a driver, from
Oliver Neukum.
8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
9) PTP config timestamp flags validation, from Richard Cochran.
10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
ipmr: Fix skb headroom in ipmr_get_route().
net: hns3: cleanup of stray struct hns3_link_mode_mapping
net/smc: fix fastopen for non-blocking connect()
rds: ib: update WR sizes when bringing up connection
net: gemini: add missed free_netdev
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
seg6: fix skb transport_header after decap_and_validate()
seg6: fix srh pointer in get_srh()
net: stmmac: Use the correct style for SPDX License Identifier
octeontx2-af: Use the correct style for SPDX License Identifier
ptp: Extend the test program to check the external time stamp flags.
mlx5: Reject requests to enable time stamping on both edges.
igb: Reject requests that fail to enable time stamping on both edges.
dp83640: Reject requests to enable time stamping on both edges.
mv88e6xxx: Reject requests to enable time stamping on both edges.
ptp: Introduce strict checking of external time stamp options.
renesas: reject unsupported external timestamp flags
mlx5: reject unsupported external timestamp flags
igb: reject unsupported external timestamp flags
dp83640: reject unsupported external timestamp flags
...
kbuild test robot [Fri, 15 Nov 2019 22:38:34 +0000 (06:38 +0800)]
mscc.c: fix semicolon.cocci warnings
drivers/net/phy/mscc.c:1683:3-4: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 75a1ccfe6c72 ("mscc.c: Add support for additional VSC PHYs")
CC: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 16 Nov 2019 01:55:54 +0000 (17:55 -0800)]
selftests: net: avoid ptl lock contention in tcp_mmap
tcp_mmap is used as a reference program for TCP rx zerocopy,
so it is important to point out some potential issues.
If multiple threads are concurrently using getsockopt(...
TCP_ZEROCOPY_RECEIVE), there is a chance the low-level mm
functions compete on shared ptl lock, if vma are arbitrary placed.
Instead of letting the mm layer place the chunks back to back,
this patch enforces an alignment so that each thread uses
a different ptl lock.
Performance measured on a 100 Gbit NIC, with 8 tcp_mmap clients
launched at the same time :
$ for f in {1..8}; do ./tcp_mmap -H 2002:a05:6608:290:: & done
In the following run, we reproduce the old behavior by requesting no alignment :
$ tcp_mmap -sz -C $((128*1024)) -a 4096
received 32768 MB (100 % mmap'ed) in 9.69532 s, 28.3516 Gbit
cpu usage user:0.08634 sys:3.86258, 120.511 usec per MB, 171839 c-switches
received 32768 MB (100 % mmap'ed) in 25.4719 s, 10.7914 Gbit
cpu usage user:0.055268 sys:21.5633, 659.745 usec per MB, 9065 c-switches
received 32768 MB (100 % mmap'ed) in 28.5419 s, 9.63069 Gbit
cpu usage user:0.057401 sys:23.8761, 730.392 usec per MB, 14987 c-switches
received 32768 MB (100 % mmap'ed) in 28.655 s, 9.59268 Gbit
cpu usage user:0.059689 sys:23.8087, 728.406 usec per MB, 18509 c-switches
received 32768 MB (100 % mmap'ed) in 28.7808 s, 9.55074 Gbit
cpu usage user:0.066042 sys:23.4632, 718.056 usec per MB, 24702 c-switches
received 32768 MB (100 % mmap'ed) in 28.8259 s, 9.5358 Gbit
cpu usage user:0.056547 sys:23.6628, 723.858 usec per MB, 23518 c-switches
received 32768 MB (100 % mmap'ed) in 28.8808 s, 9.51767 Gbit
cpu usage user:0.059357 sys:23.8515, 729.703 usec per MB, 14691 c-switches
received 32768 MB (100 % mmap'ed) in 28.8879 s, 9.51534 Gbit
cpu usage user:0.047115 sys:23.7349, 725.769 usec per MB, 21773 c-switches
New behavior (automatic alignment based on Hugepagesize),
we can see the system overhead being dramatically reduced.
$ tcp_mmap -sz -C $((128*1024))
received 32768 MB (100 % mmap'ed) in 13.5339 s, 20.3103 Gbit
cpu usage user:0.122644 sys:3.4125, 107.884 usec per MB, 168567 c-switches
received 32768 MB (100 % mmap'ed) in 16.0335 s, 17.1439 Gbit
cpu usage user:0.132428 sys:3.55752, 112.608 usec per MB, 188557 c-switches
received 32768 MB (100 % mmap'ed) in 17.5506 s, 15.6621 Gbit
cpu usage user:0.155405 sys:3.24889, 103.891 usec per MB, 226652 c-switches
received 32768 MB (100 % mmap'ed) in 19.1924 s, 14.3222 Gbit
cpu usage user:0.135352 sys:3.35583, 106.542 usec per MB, 207404 c-switches
received 32768 MB (100 % mmap'ed) in 22.3649 s, 12.2906 Gbit
cpu usage user:0.142429 sys:3.53187, 112.131 usec per MB, 250225 c-switches
received 32768 MB (100 % mmap'ed) in 22.5336 s, 12.1986 Gbit
cpu usage user:0.140654 sys:3.61971, 114.757 usec per MB, 253754 c-switches
received 32768 MB (100 % mmap'ed) in 22.5483 s, 12.1906 Gbit
cpu usage user:0.134035 sys:3.55952, 112.718 usec per MB, 252997 c-switches
received 32768 MB (100 % mmap'ed) in 22.6442 s, 12.139 Gbit
cpu usage user:0.126173 sys:3.71251, 117.147 usec per MB, 253728 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 15 Nov 2019 21:38:25 +0000 (22:38 +0100)]
r8169: load firmware for RTL8168fp/RTL8117
Load Realtek-provided firmware for RTL8168fp/RTL8117. Unlike the
firmware for other chip versions which is for the PHY, firmware for
RTL8168fp/RTL8117 is for the MAC.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Fri, 15 Nov 2019 20:35:22 +0000 (21:35 +0100)]
r8169: improve conditional firmware loading for RTL8168d
Using constant MII_EXPANSION is misleading here because register 0x06
has a different meaning on page 0x0005. Here a proprietary PHY
parameter is read by writing the parameter id to register 0x05 on page
0x0005, followed by reading the parameter value from register 0x06.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Fri, 15 Nov 2019 20:05:45 +0000 (20:05 +0000)]
net: phylink: update to use phy_support_asym_pause()
Use phy_support_asym_pause() rather than open-coding it.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 15 Nov 2019 17:29:52 +0000 (18:29 +0100)]
ipmr: Fix skb headroom in ipmr_get_route().
In route.c, inet_rtm_getroute_build_skb() creates an skb with no
headroom. This skb is then used by inet_rtm_getroute() which may pass
it to rt_fill_info() and, from there, to ipmr_get_route(). The later
might try to reuse this skb by cloning it and prepending an IPv4
header. But since the original skb has no headroom, skb_push() triggers
skb_under_panic():
skbuff: skb_under_panic: text:
00000000ca46ad8a len:80 put:20 head:
00000000cd28494e data:
000000009366fd6b tail:0x3c end:0xec0 dev:veth0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:108!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
RIP: 0010:skb_panic+0xbf/0xd0
Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
RSP: 0018:
ffff888059ddf0b0 EFLAGS:
00010286
RAX:
0000000000000086 RBX:
ffff888060a315c0 RCX:
ffffffff8abe4822
RDX:
0000000000000000 RSI:
0000000000000008 RDI:
ffff88806c9a79cc
RBP:
ffff888059ddf118 R08:
ffffed100d9361b1 R09:
ffffed100d9361b0
R10:
ffff88805c68aee3 R11:
ffffed100d9361b1 R12:
ffff88805d218000
R13:
ffff88805c689fec R14:
000000000000003c R15:
0000000000000ec0
FS:
00007f6af184b700(0000) GS:
ffff88806c980000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffc8204a000 CR3:
0000000057b40006 CR4:
0000000000360ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
skb_push+0x7e/0x80
ipmr_get_route+0x459/0x6fa
rt_fill_info+0x692/0x9f0
inet_rtm_getroute+0xd26/0xf20
rtnetlink_rcv_msg+0x45d/0x630
netlink_rcv_skb+0x1a5/0x220
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x305/0x3a0
netlink_sendmsg+0x575/0x730
sock_sendmsg+0xb5/0xc0
___sys_sendmsg+0x497/0x4f0
__sys_sendmsg+0xcb/0x150
__x64_sys_sendmsg+0x48/0x50
do_syscall_64+0xd2/0xac0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Actually the original skb used to have enough headroom, but the
reserve_skb() call was lost with the introduction of
inet_rtm_getroute_build_skb() by commit
404eb77ea766 ("ipv4: support
sport, dport and ip_proto in RTM_GETROUTE").
We could reserve some headroom again in inet_rtm_getroute_build_skb(),
but this function shouldn't be responsible for handling the special
case of ipmr_get_route(). Let's handle that directly in
ipmr_get_route() by calling skb_realloc_headroom() instead of
skb_clone().
Fixes: 404eb77ea766 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 16 Nov 2019 21:06:07 +0000 (13:06 -0800)]
Merge tag 'wireless-drivers-next-2019-11-15' of git://git./linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.5
Second set of patches for v5.5. Nothing special this time, smaller
features to various drivers and of course fixes all over.
Major changes:
iwlwifi
* update scan FW API
* bump the supported FW API version
* add debug dump collection on assert in WoWLAN
* enable adaptive dwell on P2P interfaces
ath10k
* request for PM_QOS_CPU_DMA_LATENCY to improve firmware initialisation time
qtnfmac
* add support for getting/setting transmit power
* handle MIC failure event from firmware
rtl8xxxu
* add support for Edimax EW-7611ULB
wil6210
* add SPDX license identifiers
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta [Fri, 15 Nov 2019 11:52:32 +0000 (11:52 +0000)]
net: hns3: cleanup of stray struct hns3_link_mode_mapping
This patch cleans-up the stray left over code. It has no
functionality impact.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Fri, 15 Nov 2019 11:39:30 +0000 (12:39 +0100)]
net/smc: fix fastopen for non-blocking connect()
FASTOPEN does not work with SMC-sockets. Since SMC allows fallback to
TCP native during connection start, the FASTOPEN setsockopts trigger
this fallback, if the SMC-socket is still in state SMC_INIT.
But if a FASTOPEN setsockopt is called after a non-blocking connect(),
this is broken, and fallback does not make sense.
This change complements
commit
cd2063604ea6 ("net/smc: avoid fallback in case of non-blocking connect")
and fixes the syzbot reported problem "WARNING in smc_unhash_sk".
Reported-by: syzbot+8488cc4cf1c9e09b8b86@syzkaller.appspotmail.com
Fixes: e1bbdd570474 ("net/smc: reduce sock_put() for fallback sockets")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Fri, 15 Nov 2019 11:10:37 +0000 (12:10 +0100)]
bonding: symmetric ICMP transmit
A bonding with layer2+3 or layer3+4 hashing uses the IP addresses and the ports
to balance packets between slaves. With some network errors, we receive an ICMP
error packet by the remote host or a router. If sent by a router, the source IP
can differ from the remote host one. Additionally the ICMP protocol has no port
numbers, so a layer3+4 bonding will get a different hash than the previous one.
These two conditions could let the packet go through a different interface than
the other packets of the same flow:
# tcpdump -qltnni veth0 |sed 's/^/0: /' &
# tcpdump -qltnni veth1 |sed 's/^/1: /' &
# hping3 -2 192.168.0.2 -p 9
0: IP 192.168.0.1.2251 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2252 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.2253 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.2254 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
An ICMP error packet contains the header of the packet which caused the network
error, so inspect it and match the flow against it, so we can send the ICMP via
the same interface of the previous packet in the flow.
Move the IP and port dissect code into a generic function bond_flow_ip() and if
we are dissecting an ICMP error packet, call it again with the adjusted offset.
# hping3 -2 192.168.0.2 -p 9
1: IP 192.168.0.1.1224 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
1: IP 192.168.0.1.1225 > 192.168.0.2.9: UDP, length 0
1: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1226 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
0: IP 192.168.0.1.1227 > 192.168.0.2.9: UDP, length 0
0: IP 192.168.0.2 > 192.168.0.1: ICMP 192.168.0.2 udp port 9 unreachable, length 36
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Fri, 15 Nov 2019 10:11:15 +0000 (11:11 +0100)]
net: mscc: ocelot: omit error check from of_get_phy_mode
The commit
0c65b2b90d13c ("net: of_get_phy_mode: Change API to solve
int/unit warnings") updated the function of_get_phy_mode declaration.
Now it returns an error code and in case the node doesn't contain the
property 'phy-mode' or 'phy-connection-type' it returns -EINVAL and would
set the phy_interface_t to PHY_INTERFACE_MODE_NA.
Ocelot VSC7514 has 4 internal phys which have the phy interface
PHY_INTERFACE_MODE_NA. So because of_get_phy_mode would assign
PHY_INTERFACE_MODE_NA to phy_mode when there is an error, there is no need
to add the error check.
Updates for v2:
- drop error check because of_get_phy_mode already assigns phy_interface
to PHY_INTERFACE_MODE in case of error.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Lobakin [Fri, 15 Nov 2019 09:11:35 +0000 (12:11 +0300)]
net: core: allow fast GRO for skbs with Ethernet header in head
Commit
78d3fd0b7de8 ("gro: Only use skb_gro_header for completely
non-linear packets") back in May'09 (v2.6.31-rc1) has changed the
original condition '!skb_headlen(skb)' to
'skb->mac_header == skb->tail' in gro_reset_offset() saying: "Since
the drivers that need this optimisation all provide completely
non-linear packets" (note that this condition has become the current
'skb_mac_header(skb) == skb_tail_pointer(skb)' later with commmit
ced14f6804a9 ("net: Correct comparisons and calculations using
skb->tail and skb-transport_header") without any functional changes).
For now, we have the following rough statistics for v5.4-rc7:
1) napi_gro_frags: 14
2) napi_gro_receive with skb->head containing (most of) payload: 83
3) napi_gro_receive with skb->head containing all the headers: 20
4) napi_gro_receive with skb->head containing only Ethernet header: 2
With the current condition, fast GRO with the usage of
NAPI_GRO_CB(skb)->frag0 is available only in the [1] case.
Packets pushed by [2] and [3] go through the 'slow' path, but
it's not a problem for them as they already contain all the needed
headers in skb->head, so pskb_may_pull() only moves skb->data.
The layout of skbs in the fourth [4] case at the moment of
dev_gro_receive() is identical to skbs that have come through [1],
as napi_frags_skb() pulls Ethernet header to skb->head. The only
difference is that the mentioned condition is always false for them,
because skb_put() and friends irreversibly alter the tail pointer.
They also go through the 'slow' path, but now every single
pskb_may_pull() in every single .gro_receive() will call the *really*
slow __pskb_pull_tail() to pull headers to head. This significantly
decreases the overall performance for no visible reasons.
The only two users of method [4] is:
* drivers/staging/qlge
* drivers/net/wireless/iwlwifi (all three variants: dvm, mvm, mvm-mq)
Note that in case with wireless drivers we can't use [1]
(napi_gro_frags()) at least for now and mac80211 stack always
performs pushes and pulls anyways, so performance hit is inavoidable.
At the moment of v2.6.31 the mentioned change was necessary (that's
why I don't add the "Fixes:" tag), but it became obsolete since
skb_gro_mac_header() has gone in commit
a50e233c50db ("net-gro:
restore frag0 optimization"), so we can simply revert the condition
in gro_reset_offset() to allow skbs from [4] go through the 'fast'
path just like in case [1].
This was tested on a 600 MHz MIPS CPU and a custom driver and this
patch gave boosts up to 40 Mbps to method [4] in both directions
comparing to net-next, which made overall performance relatively
close to [1] (without it, [4] is the slowest).
v2:
- Add more references and explanations to commit message
- Fix some typos ibid
- No functional changes
Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dag Moxnes [Fri, 15 Nov 2019 08:56:01 +0000 (09:56 +0100)]
rds: ib: update WR sizes when bringing up connection
Currently WR sizes are updated from rds_ib_sysctl_max_send_wr and
rds_ib_sysctl_max_recv_wr when a connection is shut down. As a result,
a connection being down while rds_ib_sysctl_max_send_wr or
rds_ib_sysctl_max_recv_wr are updated, will not update the sizes when
it comes back up.
Move resizing of WRs to rds_ib_setup_qp so that connections will be setup
with the most current WR sizes.
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Chuhong Yuan [Fri, 15 Nov 2019 06:24:54 +0000 (14:24 +0800)]
net: gemini: add missed free_netdev
This driver forgets to free allocated netdev in remove like
what is done in probe failure.
Add the free to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 16 Nov 2019 20:50:57 +0000 (12:50 -0800)]
Merge branch 'bnx2x-Remove-function-casts'
Kees Cook says:
====================
bnx2x: Remove function casts
In order to make the entire kernel usable under Clang's Control Flow
Integrity protections, function prototype casts need to be avoided
because this will trip CFI checks at runtime (i.e. a mismatch between
the caller's expected function prototype and the destination function's
prototype). Many of these cases can be found with -Wcast-function-type,
which found that bnx2x had a bunch of needless (or at least confusing)
function casts. This series removes them all.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:15 +0000 (21:07 -0800)]
bnx2x: Remove hw_reset_t function casts
All .rw_reset callbacks except bnx2x_84833_hw_reset_phy() use a
void return type. No callers of .hw_reset check a return value and
bnx2x_84833_hw_reset_phy() unconditionally returns 0. Remove all
hw_reset_t casts and fix the return type to void.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:14 +0000 (21:07 -0800)]
bnx2x: Remove format_fw_ver_t function casts
The return values for format_fw_ver_t callbacks are supposed to be
"int", not "u8". Ultimately, the top-level caller doesn't actually check
the return value at all, but just clean this all up anyway and fix the
prototypes so that casts are no longer needed.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:13 +0000 (21:07 -0800)]
bnx2x: Remove config_init_t function casts
No callers of .config_init check return values. Remove the casting and
change all callbacks to have the correct function prototype.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:12 +0000 (21:07 -0800)]
bnx2x: Remove read_status_t function casts
The function casts for .read_status callbacks end up casting some int
return values to u8. This seems to be bug-prone (-EINVAL being returned
into something that appears to be true/false), but fixing the function
prototypes doesn't change the existing behavior. Fix the return values
to remove the casts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Fri, 15 Nov 2019 05:07:11 +0000 (21:07 -0800)]
bnx2x: Drop redundant callback function casts
NULL is already "void *" so it will auto-cast in assignments and
initializers. Additionally, all the callbacks for .link_reset,
.config_loopback, .set_link_led, and .phy_specific_func are already
correct. No casting is needed for these, so remove them.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po Liu [Fri, 15 Nov 2019 03:33:41 +0000 (03:33 +0000)]
enetc: update TSN Qbv PSPEED set according to adjust link speed
ENETC has a register PSPEED to indicate the link speed of hardware.
It is need to update accordingly. PSPEED field needs to be updated
with the port speed for QBV scheduling purposes. Or else there is
chance for gate slot not free by frame taking the MAC if PSPEED and
phy speed not match. So update PSPEED when link adjust. This is
implement by the adjust_link.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po Liu [Fri, 15 Nov 2019 03:33:33 +0000 (03:33 +0000)]
enetc: Configure the Time-Aware Scheduler via tc-taprio offload
ENETC supports in hardware for time-based egress shaping according
to IEEE 802.1Qbv. This patch implement the Qbv enablement by the
hardware offload method qdisc tc-taprio method.
Also update cbdr writeback to up level since control bd ring may
writeback data to control bd ring.
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Lemon [Thu, 14 Nov 2019 22:13:00 +0000 (14:13 -0800)]
page_pool: do not release pool until inflight == 0.
The page pool keeps track of the number of pages in flight, and
it isn't safe to remove the pool until all pages are returned.
Disallow removing the pool until all pages are back, so the pool
is always available for page producers.
Make the page pool responsible for its own delayed destruction
instead of relying on XDP, so the page pool can be used without
the xdp memory model.
When all pages are returned, free the pool and notify xdp if the
pool is registered with the xdp memory system. Have the callback
perform a table walk since some drivers (cpsw) may share the pool
among multiple xdp_rxq_info.
Note that the increment of pages_state_release_cnt may result in
inflight == 0, resulting in the pool being released.
Fixes: d956a048cd3f ("xdp: force mem allocator removal and periodic warning")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 16 Nov 2019 20:26:49 +0000 (12:26 -0800)]
Merge branch 'smc-last-part-of-termination-improvements'
Karsten Graul says:
====================
last part of termination improvements
Patches 1 and 2 finish the set of termination patches, introducing
a reboot handler that terminates all link groups. Patch 3 adds an
rcu_barrier before the module is unloaded, and patch 4 is cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:32 +0000 (17:47 +0100)]
net/smc: remove unused constant
Constant SMC_CLOSE_WAIT_LISTEN_CLCSOCK_TIME is defined, but since
commit
3d502067599f ("net/smc: simplify wait when closing listen socket")
no longer used. Remove it.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:31 +0000 (17:47 +0100)]
net/smc: use rcu_barrier() on module unload
Add rcu_barrier() to make sure no RCU readers or callbacks are
pending when the module is unloaded.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:30 +0000 (17:47 +0100)]
net/smc: guarantee removal of link groups in reboot
When rebooting it should be guaranteed all link groups are cleaned
up and freed.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Sat, 16 Nov 2019 16:47:29 +0000 (17:47 +0100)]
net/smc: introduce bookkeeping of SMCR link groups
If the smc module is unloaded return control from exit routine only,
if all link groups are freed.
If an IB device is thrown away return control from device removal only,
if all link groups belonging to this device are freed.
Counters for the total number of SMCR link groups and for the total
number of SMCR links per IB device are introduced. smc module unloading
continues only if the total number of SMCR link groups is zero. IB device
removal continues only it the total number of SMCR links per IB device
has decreased to zero.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Sat, 16 Nov 2019 16:08:25 +0000 (18:08 +0200)]
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
This sequence of operations:
ip link set dev br0 type bridge vlan_filtering 1
bridge vlan del dev swp2 vid 1
ip link set dev br0 type bridge vlan_filtering 1
ip link set dev br0 type bridge vlan_filtering 0
apparently fails with the message:
[ 31.305716] sja1105 spi0.1: Reset switch and programmed static config. Reason: VLAN filtering
[ 31.322161] sja1105 spi0.1: Couldn't determine PVID attributes (pvid 0)
[ 31.328939] sja1105 spi0.1: Failed to setup VLAN tagging for port 1: -2
[ 31.335599] ------------[ cut here ]------------
[ 31.340215] WARNING: CPU: 1 PID: 194 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4
[ 31.349981] br0: Commit of attribute (id=6) failed.
[ 31.354890] Modules linked in:
[ 31.357942] CPU: 1 PID: 194 Comm: ip Not tainted
5.4.0-rc6-01792-gf4f632e07665-dirty #2062
[ 31.366167] Hardware name: Freescale LS1021A
[ 31.370437] [<
c03144dc>] (unwind_backtrace) from [<
c030e184>] (show_stack+0x10/0x14)
[ 31.378153] [<
c030e184>] (show_stack) from [<
c11d1c1c>] (dump_stack+0xe0/0x10c)
[ 31.385437] [<
c11d1c1c>] (dump_stack) from [<
c034c730>] (__warn+0xf4/0x10c)
[ 31.392373] [<
c034c730>] (__warn) from [<
c034c7bc>] (warn_slowpath_fmt+0x74/0xb8)
[ 31.399827] [<
c034c7bc>] (warn_slowpath_fmt) from [<
c11ca204>] (switchdev_port_attr_set_now+0x9c/0xa4)
[ 31.409097] [<
c11ca204>] (switchdev_port_attr_set_now) from [<
c117036c>] (__br_vlan_filter_toggle+0x6c/0x118)
[ 31.418971] [<
c117036c>] (__br_vlan_filter_toggle) from [<
c115d010>] (br_changelink+0xf8/0x518)
[ 31.427637] [<
c115d010>] (br_changelink) from [<
c0f8e9ec>] (__rtnl_newlink+0x3f4/0x76c)
[ 31.435613] [<
c0f8e9ec>] (__rtnl_newlink) from [<
c0f8eda8>] (rtnl_newlink+0x44/0x60)
[ 31.443329] [<
c0f8eda8>] (rtnl_newlink) from [<
c0f89f20>] (rtnetlink_rcv_msg+0x2cc/0x51c)
[ 31.451477] [<
c0f89f20>] (rtnetlink_rcv_msg) from [<
c1008df8>] (netlink_rcv_skb+0xb8/0x110)
[ 31.459796] [<
c1008df8>] (netlink_rcv_skb) from [<
c1008648>] (netlink_unicast+0x17c/0x1f8)
[ 31.468026] [<
c1008648>] (netlink_unicast) from [<
c1008980>] (netlink_sendmsg+0x2bc/0x3b4)
[ 31.476261] [<
c1008980>] (netlink_sendmsg) from [<
c0f43858>] (___sys_sendmsg+0x230/0x250)
[ 31.484408] [<
c0f43858>] (___sys_sendmsg) from [<
c0f44c84>] (__sys_sendmsg+0x50/0x8c)
[ 31.492209] [<
c0f44c84>] (__sys_sendmsg) from [<
c0301000>] (ret_fast_syscall+0x0/0x28)
[ 31.500090] Exception stack(0xedf47fa8 to 0xedf47ff0)
[ 31.505122] 7fa0:
00000002 b6f2e060 00000003 beabd6a4 00000000 00000000
[ 31.513265] 7fc0:
00000002 b6f2e060 5d6e3213 00000128 00000000 00000001 00000006 000619c4
[ 31.521405] 7fe0:
00086078 beabd658 0005edbc b6e7ce68
The reason is the implementation of br_get_pvid:
static inline u16 br_get_pvid(const struct net_bridge_vlan_group *vg)
{
if (!vg)
return 0;
smp_rmb();
return vg->pvid;
}
Since VID 0 is an invalid pvid from the bridge's point of view, let's
add this check in dsa_8021q_restore_pvid to avoid restoring a pvid that
doesn't really exist.
Fixes: 5f33183b7fdf ("net: dsa: tag_8021q: Restore bridge VLANs when enabling vlan_filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 16 Nov 2019 20:18:32 +0000 (12:18 -0800)]
Merge branch 'seg6-fixes-to-Segment-Routing-in-IPv6'
Andrea Mayer says:
====================
seg6: fixes to Segment Routing in IPv6
This patchset is divided in 2 patches and it introduces some fixes
to Segment Routing in IPv6, which are:
- in function get_srh() fix the srh pointer after calling
pskb_may_pull();
- fix the skb->transport_header after calling decap_and_validate()
function;
Any comments on the patchset are welcome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Sat, 16 Nov 2019 15:05:53 +0000 (16:05 +0100)]
seg6: fix skb transport_header after decap_and_validate()
in the receive path (more precisely in ip6_rcv_core()) the
skb->transport_header is set to skb->network_header + sizeof(*hdr). As a
consequence, after routing operations, destination input expects to find
skb->transport_header correctly set to the next protocol (or extension
header) that follows the network protocol. However, decap behaviors (DX*,
DT*) remove the outer IPv6 and SRH extension and do not set again the
skb->transport_header pointer correctly. For this reason, the patch sets
the skb->transport_header to the skb->network_header + sizeof(hdr) in each
DX* and DT* behavior.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrea Mayer [Sat, 16 Nov 2019 15:05:52 +0000 (16:05 +0100)]
seg6: fix srh pointer in get_srh()
pskb_may_pull may change pointers in header. For this reason, it is
mandatory to reload any pointer that points into skb header.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Sat, 16 Nov 2019 09:40:59 +0000 (15:10 +0530)]
net: stmmac: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to STMicroelectronics based Multi-Gigabit
Ethernet driver. For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishad Kamdar [Sat, 16 Nov 2019 09:20:45 +0000 (14:50 +0530)]
octeontx2-af: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style in
header files related to Marvell OcteonTX2 network devices.
It uses an expilict block comment for the SPDX License
Identifier.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 16 Nov 2019 16:20:43 +0000 (08:20 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"11 fixes"
MM fixes and one xz decompressor fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/debug.c: PageAnon() is true for PageKsm() pages
mm/debug.c: __dump_page() prints an extra line
mm/page_io.c: do not free shared swap slots
mm/memory_hotplug: fix try_offline_node()
mm,thp: recheck each page before collapsing file THP
mm: slub: really fix slab walking for init_on_free
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
lib/xz: fix XZ_DYNALLOC to avoid useless memory reallocations
mm: fix trying to reclaim unevictable lru page when calling madvise_pageout
mm: mempolicy: fix the wrong return value and potential pages leak of mbind
Linus Torvalds [Sat, 16 Nov 2019 02:37:20 +0000 (18:37 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull more input fixes from Dmitry Torokhov:
"A couple of fixes in driver teardown paths and another ID for
Synaptics RMI mode"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation
Input: synaptics-rmi4 - destroy F54 poller workqueue when removing
Input: ff-memless - kill timer in destroy()
Ralph Campbell [Sat, 16 Nov 2019 01:35:07 +0000 (17:35 -0800)]
mm/debug.c: PageAnon() is true for PageKsm() pages
PageAnon() and PageKsm() use the low two bits of the page->mapping
pointer to indicate the page type. PageAnon() only checks the LSB while
PageKsm() checks the least significant 2 bits are equal to 3.
Therefore, PageAnon() is true for KSM pages. __dump_page() incorrectly
will never print "ksm" because it checks PageAnon() first. Fix this by
checking PageKsm() first.
Link: http://lkml.kernel.org/r/20191113000651.20677-1-rcampbell@nvidia.com
Fixes: 1c6fb1d89e73 ("mm: print more information about mapping in __dump_page")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Sat, 16 Nov 2019 01:35:04 +0000 (17:35 -0800)]
mm/debug.c: __dump_page() prints an extra line
When dumping struct page information, __dump_page() prints the page type
with a trailing blank followed by the page flags on a separate line:
anon
flags: 0x100000000090034(uptodate|lru|active|head|swapbacked)
It looks like the intent was to use pr_cont() for printing "flags:" but
pr_cont() usage is discouraged so fix this by extending the format to
include the flags into a single line:
anon flags: 0x100000000090034(uptodate|lru|active|head|swapbacked)
If the page is file backed, the name might be long so use two lines:
shmem_aops name:"dev/zero"
flags: 0x10000000008000c(uptodate|dirty|swapbacked)
Eliminate pr_conf() usage as well for appending compound_mapcount.
Link: http://lkml.kernel.org/r/20191112012608.16926-1-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vinayak Menon [Sat, 16 Nov 2019 01:35:00 +0000 (17:35 -0800)]
mm/page_io.c: do not free shared swap slots
The following race is observed due to which a processes faulting on a
swap entry, finds the page neither in swapcache nor swap. This causes
zram to give a zero filled page that gets mapped to the process,
resulting in a user space crash later.
Consider parent and child processes Pa and Pb sharing the same swap slot
with swap_count 2. Swap is on zram with SWP_SYNCHRONOUS_IO set.
Virtual address 'VA' of Pa and Pb points to the shared swap entry.
Pa Pb
fault on VA fault on VA
do_swap_page do_swap_page
lookup_swap_cache fails lookup_swap_cache fails
Pb scheduled out
swapin_readahead (deletes zram entry)
swap_free (makes swap_count 1)
Pb scheduled in
swap_readpage (swap_count == 1)
Takes SWP_SYNCHRONOUS_IO path
zram enrty absent
zram gives a zero filled page
Fix this by making sure that swap slot is freed only when swap count
drops down to one.
Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org
Fixes: aa8d22a11da9 ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference")
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Suggested-by: Minchan Kim <minchan@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Hildenbrand [Sat, 16 Nov 2019 01:34:57 +0000 (17:34 -0800)]
mm/memory_hotplug: fix try_offline_node()
try_offline_node() is pretty much broken right now:
- The node span is updated when onlining memory, not when adding it. We
ignore memory that was mever onlined. Bad.
- We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily
trigger a kernel panic. Bad for memory that is offline but also bad
for subsection hotadd with ZONE_DEVICE, whereby the memmap of the
first PFN of a section might contain garbage.
- Sections belonging to mixed nodes are not properly considered.
As memory blocks might belong to multiple nodes, we would have to walk
all pageblocks (or at least subsections) within present sections.
However, we don't have a way to identify whether a memmap that is not
online was initialized (relevant for ZONE_DEVICE). This makes things
more complicated.
Luckily, we can piggy pack on the node span and the nid stored in memory
blocks. Currently, the node span is grown when calling
move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when
removing memory, before calling try_offline_node(). Sysfs links are
created via link_mem_sections(), e.g., during boot or when adding
memory.
If the node still spans memory or if any memory block belongs to the
nid, we don't set the node offline. As memory blocks that span multiple
nodes cannot get offlined, the nid stored in memory blocks is reliable
enough (for such online memory blocks, the node still spans the memory).
Introduce for_each_memory_block() to efficiently walk all memory blocks.
Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span
when removing ZONE_DEVICE memory to fix similar issues (access of
garbage memmaps) - until we have a reliable way to identify whether
these memmaps were properly initialized. This implies later, that once
a node had ZONE_DEVICE memory, we won't be able to set a node offline -
which should be acceptable.
Since commit
f1dd2cd13c4b ("mm, memory_hotplug: do not associate
hotadded memory to zones until online") memory that is added is not
assoziated with a zone/node (memmap not initialized). The introducing
commit
60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
already missed that we could have multiple nodes for a section and that
the zone/node span is updated when onlining pages, not when adding them.
I tested this by hotplugging two DIMMs to a memory-less and cpu-less
NUMA node. The node is properly onlined when adding the DIMMs. When
removing the DIMMs, the node is properly offlined.
Masayoshi Mizuma reported:
: Without this patch, memory hotplug fails as panic:
:
: BUG: kernel NULL pointer dereference, address:
0000000000000000
: ...
: Call Trace:
: remove_memory_block_devices+0x81/0xc0
: try_remove_memory+0xb4/0x130
: __remove_memory+0xa/0x20
: acpi_memory_device_remove+0x84/0x100
: acpi_bus_trim+0x57/0x90
: acpi_bus_trim+0x2e/0x90
: acpi_device_hotplug+0x2b2/0x4d0
: acpi_hotplug_work_fn+0x1a/0x30
: process_one_work+0x171/0x380
: worker_thread+0x49/0x3f0
: kthread+0xf8/0x130
: ret_from_fork+0x35/0x40
[david@redhat.com: v3]
Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com
Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com
Fixes: 60a5a19e7419 ("memory-hotplug: remove sysfs file of node")
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b319
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Song Liu [Sat, 16 Nov 2019 01:34:53 +0000 (17:34 -0800)]
mm,thp: recheck each page before collapsing file THP
In collapse_file(), for !is_shmem case, current check cannot guarantee
the locked page is up-to-date. Specifically, xas_unlock_irq() should
not be called before lock_page() and get_page(); and it is necessary to
recheck PageUptodate() after locking the page.
With this bug and CONFIG_READ_ONLY_THP_FOR_FS=y, madvise(HUGE)'ed .text
may contain corrupted data. This is because khugepaged mistakenly
collapses some not up-to-date sub pages into a huge page, and assumes
the huge page is up-to-date. This will NOT corrupt data in the disk,
because the page is read-only and never written back. Fix this by
properly checking PageUptodate() after locking the page. This check
replaces "VM_BUG_ON_PAGE(!PageUptodate(page), page);".
Also, move PageDirty() check after locking the page. Current khugepaged
should not try to collapse dirty file THP, because it is limited to
read-only .text. The only case we hit a dirty page here is when the
page hasn't been written since write. Bail out and retry when this
happens.
syzbot reported bug on previous version of this patch.
Link: http://lkml.kernel.org/r/20191106060930.2571389-2-songliubraving@fb.com
Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: syzbot+efb9e48b9fbdc49bb34a@syzkaller.appspotmail.com
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Laura Abbott [Sat, 16 Nov 2019 01:34:50 +0000 (17:34 -0800)]
mm: slub: really fix slab walking for init_on_free
Commit
1b7e816fc80e ("mm: slub: Fix slab walking for init_on_free")
fixed one problem with the slab walking but missed a key detail: When
walking the list, the head and tail pointers need to be updated since we
end up reversing the list as a result. Without doing this, bulk free is
broken.
One way this is exposed is a NULL pointer with slub_debug=F:
=============================================================================
BUG skbuff_head_cache (Tainted: G T): Object already free
-----------------------------------------------------------------------------
INFO: Slab 0x000000000d2d2f8f objects=16 used=3 fp=0x0000000064309071 flags=0x3fff00000000201
BUG: kernel NULL pointer dereference, address:
0000000000000000
Oops: 0000 [#1] PREEMPT SMP PTI
RIP: 0010:print_trailer+0x70/0x1d5
Call Trace:
<IRQ>
free_debug_processing.cold.37+0xc9/0x149
__slab_free+0x22a/0x3d0
kmem_cache_free_bulk+0x415/0x420
__kfree_skb_flush+0x30/0x40
net_rx_action+0x2dd/0x480
__do_softirq+0xf0/0x246
irq_exit+0x93/0xb0
do_IRQ+0xa0/0x110
common_interrupt+0xf/0xf
</IRQ>
Given we're now almost identical to the existing debugging code which
correctly walks the list, combine with that.
Link: https://lkml.kernel.org/r/20191104170303.GA50361@gandi.net
Link: http://lkml.kernel.org/r/20191106222208.26815-1-labbott@redhat.com
Fixes: 1b7e816fc80e ("mm: slub: Fix slab walking for init_on_free")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reported-by: Thibaut Sautereau <thibaut.sautereau@clip-os.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <clipos@ssi.gouv.fr>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sat, 16 Nov 2019 01:34:46 +0000 (17:34 -0800)]
mm: hugetlb: switch to css_tryget() in hugetlb_cgroup_charge_cgroup()
An exiting task might belong to an offline cgroup. In this case an
attempt to grab a cgroup reference from the task can end up with an
infinite loop in hugetlb_cgroup_charge_cgroup(), because neither the
cgroup will become online, neither the task will be migrated to a live
cgroup.
Fix this by switching over to css_tryget(). As css_tryget_online()
can't guarantee that the cgroup won't go offline, in most cases the
check doesn't make sense. In this particular case users of
hugetlb_cgroup_charge_cgroup() are not affected by this change.
A similar problem is described by commit
18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Link: http://lkml.kernel.org/r/20191106225131.3543616-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sat, 16 Nov 2019 01:34:43 +0000 (17:34 -0800)]
mm: memcg: switch to css_tryget() in get_mem_cgroup_from_mm()
We've encountered a rcu stall in get_mem_cgroup_from_mm():
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 33-....: (21000 ticks this GP) idle=6c6/1/0x4000000000000002 softirq=35441/35441 fqs=5017
(t=21031 jiffies g=324821 q=95837) NMI backtrace for cpu 33
<...>
RIP: 0010:get_mem_cgroup_from_mm+0x2f/0x90
<...>
__memcg_kmem_charge+0x55/0x140
__alloc_pages_nodemask+0x267/0x320
pipe_write+0x1ad/0x400
new_sync_write+0x127/0x1c0
__kernel_write+0x4f/0xf0
dump_emit+0x91/0xc0
writenote+0xa0/0xc0
elf_core_dump+0x11af/0x1430
do_coredump+0xc65/0xee0
get_signal+0x132/0x7c0
do_signal+0x36/0x640
exit_to_usermode_loop+0x61/0xd0
do_syscall_64+0xd4/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The problem is caused by an exiting task which is associated with an
offline memcg. We're iterating over and over in the do {} while
(!css_tryget_online()) loop, but obviously the memcg won't become online
and the exiting task won't be migrated to a live memcg.
Let's fix it by switching from css_tryget_online() to css_tryget().
As css_tryget_online() cannot guarantee that the memcg won't go offline,
the check is usually useless, except some rare cases when for example it
determines if something should be presented to a user.
A similar problem is described by commit
18fa84a2db0e ("cgroup: Use
css_tryget() instead of css_tryget_online() in task_get_css()").
Johannes:
: The bug aside, it doesn't matter whether the cgroup is online for the
: callers. It used to matter when offlining needed to evacuate all charges
: from the memcg, and so needed to prevent new ones from showing up, but we
: don't care now.
Link: http://lkml.kernel.org/r/20191106225131.3543616-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeeb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutn <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lasse Collin [Sat, 16 Nov 2019 01:34:39 +0000 (17:34 -0800)]
lib/xz: fix XZ_DYNALLOC to avoid useless memory reallocations
s->dict.allocated was initialized to 0 but never set after a successful
allocation, thus the code always thought that the dictionary buffer has
to be reallocated.
Link: http://lkml.kernel.org/r/20191104185107.3b6330df@tukaani.org
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reported-by: Yu Sun <yusun2@cisco.com>
Acked-by: Daniel Walker <danielwa@cisco.com>
Cc: "Yixia Si (yisi)" <yisi@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhong jiang [Sat, 16 Nov 2019 01:34:36 +0000 (17:34 -0800)]
mm: fix trying to reclaim unevictable lru page when calling madvise_pageout
Recently, I hit the following issue when running upstream.
kernel BUG at mm/vmscan.c:1521!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 23385 Comm: syz-executor.6 Not tainted 5.4.0-rc4+ #1
RIP: 0010:shrink_page_list+0x12b6/0x3530 mm/vmscan.c:1521
Call Trace:
reclaim_pages+0x499/0x800 mm/vmscan.c:2188
madvise_cold_or_pageout_pte_range+0x58a/0x710 mm/madvise.c:453
walk_pmd_range mm/pagewalk.c:53 [inline]
walk_pud_range mm/pagewalk.c:112 [inline]
walk_p4d_range mm/pagewalk.c:139 [inline]
walk_pgd_range mm/pagewalk.c:166 [inline]
__walk_page_range+0x45a/0xc20 mm/pagewalk.c:261
walk_page_range+0x179/0x310 mm/pagewalk.c:349
madvise_pageout_page_range mm/madvise.c:506 [inline]
madvise_pageout+0x1f0/0x330 mm/madvise.c:542
madvise_vma mm/madvise.c:931 [inline]
__do_sys_madvise+0x7d2/0x1600 mm/madvise.c:1113
do_syscall_64+0x9f/0x4c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
madvise_pageout() accesses the specified range of the vma and isolates
them, then runs shrink_page_list() to reclaim its memory. But it also
isolates the unevictable pages to reclaim. Hence, we can catch the
cases in shrink_page_list().
The root cause is that we scan the page tables instead of specific LRU
list. and so we need to filter out the unevictable lru pages from our
end.
Link: http://lkml.kernel.org/r/1572616245-18946-1-git-send-email-zhongjiang@huawei.com
Fixes: 1a4e58cce84e ("mm: introduce MADV_PAGEOUT")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Shi [Sat, 16 Nov 2019 01:34:33 +0000 (17:34 -0800)]
mm: mempolicy: fix the wrong return value and potential pages leak of mbind
Commit
d883544515aa ("mm: mempolicy: make the behavior consistent when
MPOL_MF_MOVE* and MPOL_MF_STRICT were specified") fixed the return value
of mbind() for a couple of corner cases. But, it altered the errno for
some other cases, for example, mbind() should return -EFAULT when part
or all of the memory range specified by nodemask and maxnode points
outside your accessible address space, or there was an unmapped hole in
the specified memory range specified by addr and len.
Fix this by preserving the errno returned by queue_pages_range(). And,
the pagelist may be not empty even though queue_pages_range() returns
error, put the pages back to LRU since mbind_range() is not called to
really apply the policy so those pages should not be migrated, this is
also the old behavior before the problematic commit.
Link: http://lkml.kernel.org/r/1572454731-3925-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: d883544515aa ("mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Li Xinhai <lixinhai.lxh@gmail.com>
Reviewed-by: Li Xinhai <lixinhai.lxh@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.19 and 5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lyude Paul [Fri, 15 Nov 2019 22:57:13 +0000 (14:57 -0800)]
Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation
Just got one of these for debugging some unrelated issues, and noticed
that Lenovo seems to have gone back to using RMI4 over smbus with
Synaptics touchpads on some of their new systems, particularly this one.
So, let's enable RMI mode for the X1 Extreme 2nd Generation.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191115221814.31903-1-lyude@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pablo Neira Ayuso [Fri, 15 Nov 2019 10:36:35 +0000 (11:36 +0100)]
netfilter: nf_tables: add nft_unregister_flowtable_hook()
Unbind flowtable callback if hook is unregistered.
This patch is implicitly fixing the error path of
nf_tables_newflowtable() and nft_flowtable_event().
Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Reported-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
wenxu [Fri, 15 Nov 2019 11:21:26 +0000 (19:21 +0800)]
netfilter: nf_tables: check if bind callback fails and unbind if hook registration fails
Undo the callback binding before unregistering the existing hooks. This
should also check for error of the bind setup call.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Thu, 14 Nov 2019 13:17:28 +0000 (14:17 +0100)]
netfilter: nf_tables_offload: undo updates if transaction fails
The nft_flow_rule_offload_commit() function might fail after several
successful commands, thus, leaving the hardware filtering policy in
inconsistent state.
This patch adds nft_flow_rule_offload_abort() function which undoes the
updates that have been already processed if one command in this
transaction fails. Hence, the hardware ruleset is left as it was before
this aborted transaction.
The deletion path needs to create the flow_rule object too, in case that
an existing rule needs to be re-added from the abort path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Thu, 14 Nov 2019 13:17:24 +0000 (14:17 +0100)]
netfilter: nf_tables_offload: release flow_rule on error from commit path
If hardware offload commit path fails, release all flow_rule objects.
Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Thu, 14 Nov 2019 13:17:19 +0000 (14:17 +0100)]
netfilter: nf_tables_offload: remove reference to flow rule from deletion path
The cookie is sufficient to delete the rule from the hardware.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
wenxu [Wed, 13 Nov 2019 04:46:40 +0000 (12:46 +0800)]
netfilter: nf_flow_table: remove unnecessary parameter in flow_offload_fill_dir
The ct object is already in the flow_offload structure, remove it.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
wenxu [Wed, 13 Nov 2019 04:46:39 +0000 (12:46 +0800)]
netfilter: nf_flow_table_offload: Fix check ndo_setup_tc when setup_block
It should check the ndo_setup_tc in the nf_flow_table_offload_setup.
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Phil Sutter [Tue, 12 Nov 2019 16:14:37 +0000 (17:14 +0100)]
netfilter: Support iif matches in POSTROUTING
Instead of generally passing NULL to NF_HOOK_COND() for input device,
pass skb->dev which contains input device for routed skbs.
Note that iptables (both legacy and nft) reject rules with input
interface match from being added to POSTROUTING chains, but nftables
allows this.
Cc: Eric Garver <eric@garver.life>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 13 Nov 2019 13:08:01 +0000 (14:08 +0100)]
netfilter: nf_flow_table_offload: add IPv6 support
Add nf_flow_rule_route_ipv6() and use it from the IPv6 and the inet
flowtable type definitions. Rename the nf_flow_rule_route() function to
nf_flow_rule_route_ipv4().
Adjust maximum number of actions, which now becomes 16 to leave
sufficient room for the IPv6 address mangling for NAT.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pablo Neira Ayuso [Wed, 13 Nov 2019 13:08:00 +0000 (14:08 +0100)]
netfilter: nf_flow_table_offload: add flow_action_entry_next() and use it
This function retrieves a spare action entry from the array of actions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Arnd Bergmann [Fri, 8 Nov 2019 21:32:47 +0000 (22:32 +0100)]
netfilter: nft_meta: use 64-bit time arithmetic
On 32-bit architectures, get_seconds() returns an unsigned 32-bit
time value, which also matches the type used in the nft_meta
code. This will not overflow in year 2038 as a time_t would, but
it still suffers from the overflow problem later on in year 2106.
Change this instance to use the time64_t type consistently
and avoid the deprecated get_seconds().
The nft_meta_weekday() calculation potentially gets a little slower
on 32-bit architectures, but now it has the same behavior as on
64-bit architectures and does not overflow.
Fixes: 63d10e12b00d ("netfilter: nft_meta: support for time matching")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Arnd Bergmann [Fri, 8 Nov 2019 20:34:28 +0000 (21:34 +0100)]
netfilter: xt_time: use time64_t
The current xt_time driver suffers from the y2038 overflow on 32-bit
architectures, when the time of day calculations break.
Also, on both 32-bit and 64-bit architectures, there is a problem with
info->date_start/stop, which is part of the user ABI and overflows in
in 2106.
Fix the first issue by using time64_t and explicit calls to div_u64()
and div_u64_rem(), and document the seconds issue.
The explicit 64-bit division is unfortunately slower on 32-bit
architectures, but doing it as unsigned lets us use the optimized
division-through-multiplication path in most configurations. This should
be fine, as the code already does not allow any negative time of day
values.
Using u32 seconds values consistently would probably also work and
be a little more efficient, but that doesn't feel right as it would
propagate the y2106 overflow to more place rather than fewer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Torvalds [Fri, 15 Nov 2019 21:02:34 +0000 (13:02 -0800)]
Merge tag 'for-linus-
20191115' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should make it into this release. This contains:
- io_uring:
- The timeout command assumes sequence == 0 means that we want
one completion, but this kind of overloading is unfortunate as
it prevents users from doing a pure time based wait. Since
this operation was introduced in this cycle, let's correct it
now, while we can. (me)
- One-liner to fix an issue with dependent links and fixed
buffer reads. The actual IO completed fine, but the link got
severed since we stored the wrong expected value. (me)
- Add TIMEOUT to list of opcodes that don't need a file. (Pavel)
- rsxx missing workqueue destry calls. Old bug. (Chuhong)
- Fix blk-iocost active list check (Jiufei)
- Fix impossible-to-hit overflow merge condition, that still hit some
folks very rarely (Junichi)
- Fix bfq hang issue from 5.3. This didn't get marked for stable, but
will go into stable post this merge (Paolo)"
* tag 'for-linus-
20191115' of git://git.kernel.dk/linux-block:
rsxx: add missed destroy_workqueue calls in remove
iocost: check active_list of all the ancestors in iocg_activate()
block, bfq: deschedule empty bfq_queues not referred by any process
io_uring: ensure registered buffer import returns the IO length
io_uring: Fix getting file for timeout
block: check bi_size overflow before merge
io_uring: make timeout sequence == 0 mean no sequence
David S. Miller [Fri, 15 Nov 2019 20:48:33 +0000 (12:48 -0800)]
Merge branch 'ptp-Validate-the-ancillary-ioctl-flags-more-carefully'
Richard Cochran says:
====================
ptp: Validate the ancillary ioctl flags more carefully.
The flags passed to the ioctls for periodic output signals and
time stamping of external signals were never checked, and thus formed
a useless ABI inadvertently. More recently, a version 2 of the ioctls
was introduced in order make the flags meaningful. This series
tightens up the checks on the new ioctl flags.
- Patch 1 ensures at least one edge flag is set for the new ioctl.
- Patches 2-7 are Jacob's recent checks, picking up the tags.
- Patch 8 introduces a "strict" flag for passing to the drivers when the
new ioctl is used.
- Patches 9-12 implement the "strict" checking in the drivers.
- Patch 13 extends the test program to exercise combinations of flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:07 +0000 (10:45 -0800)]
ptp: Extend the test program to check the external time stamp flags.
Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:06 +0000 (10:45 -0800)]
mlx5: Reject requests to enable time stamping on both edges.
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:05 +0000 (10:45 -0800)]
igb: Reject requests that fail to enable time stamping on both edges.
This hardware always time stamps rising and falling edges, and so this
patch validates that the request does contains both edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:04 +0000 (10:45 -0800)]
dp83640: Reject requests to enable time stamping on both edges.
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:03 +0000 (10:45 -0800)]
mv88e6xxx: Reject requests to enable time stamping on both edges.
This driver enables rising edge or falling edge, but not both, and so
this patch validates that the request contains only one of the two
edges.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:45:02 +0000 (10:45 -0800)]
ptp: Introduce strict checking of external time stamp options.
User space may request time stamps on rising edges, falling edges, or
both. However, the particular mode may or may not be supported in the
hardware or in the driver. This patch adds a "strict" flag that tells
drivers to ensure that the requested mode will be honored.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:45:01 +0000 (10:45 -0800)]
renesas: reject unsupported external timestamp flags
Fix the renesas PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:45:00 +0000 (10:45 -0800)]
mlx5: reject unsupported external timestamp flags
Fix the mlx5 core PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
[ RC: I'm not 100% sure what this driver does, but if I'm not wrong it
follows the dp83640:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge
]
Cc: Feras Daoud <ferasda@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:59 +0000 (10:44 -0800)]
igb: reject unsupported external timestamp flags
Fix the igb PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
This HW always time stamps both edges:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp both edges
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp both edges
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:58 +0000 (10:44 -0800)]
dp83640: reject unsupported external timestamp flags
Fix the dp83640 PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
For the record, the semantics of this driver are:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp falling edge
Cc: Stefan Sørensen <stefan.sorensen@spectralink.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:57 +0000 (10:44 -0800)]
mv88e6xxx: reject unsupported external timestamp flags
Fix the mv88e6xxx PTP support to explicitly reject any future flags that
get added to the external timestamp request ioctl.
In order to maintain currently functioning code, this patch accepts all
three current flags. This is because the PTP_RISING_EDGE and
PTP_FALLING_EDGE flags have unclear semantics and each driver seems to
have interpreted them slightly differently.
For the record, the semantics of this driver are:
flags Meaning
---------------------------------------------------- --------------------------
PTP_ENABLE_FEATURE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE Time stamp rising edge
PTP_ENABLE_FEATURE|PTP_FALLING_EDGE Time stamp falling edge
PTP_ENABLE_FEATURE|PTP_RISING_EDGE|PTP_FALLING_EDGE Time stamp rising edge
Cc: Brandon Streiff <brandon.streiff@ni.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jacob Keller [Thu, 14 Nov 2019 18:44:56 +0000 (10:44 -0800)]
net: reject PTP periodic output requests with unsupported flags
Commit
823eb2a3c4c7 ("PTP: add support for one-shot output") introduced
a new flag for the PTP periodic output request ioctl. This flag is not
currently supported by any driver.
Fix all drivers which implement the periodic output request ioctl to
explicitly reject any request with flags they do not understand. This
ensures that the driver does not accidentally misinterpret the
PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future.
This is important for forward compatibility: if a new flag is
introduced, the driver should reject requests to enable the flag until
the driver has actually been modified to support the flag in question.
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Christopher Hall <christopher.s.hall@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Richard Cochran [Thu, 14 Nov 2019 18:44:55 +0000 (10:44 -0800)]
ptp: Validate requests to enable time stamping of external signals.
Commit
415606588c61 ("PTP: introduce new versions of IOCTLs")
introduced a new external time stamp ioctl that validates the flags.
This patch extends the validation to ensure that at least one rising
or falling edge flag is set when enabling external time stamps.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / openwrt / staging / blogic.git / log