drm/i915: Make intel_pm_setup take dev_priv

Function actually wants dev_priv so give it to it.

v2: Commit message. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480601805-14391-2-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Make i915_save/restore_state and intel_i2c_reset take dev_priv

dev_priv is more appropriate since it is used much more in these.

v2: Commit message and keep the local pdev variable. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Make i915_destroy_error_state take dev_priv

Since it does not need dev at all.

Also change the stored pointer in struct i915_error_state_file_priv
to i915.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Make gmbus setup take dev_priv

Simplify the code by passing the right argument in.

v2: Commit message. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Unexport VGA switcheroo functions

They are only used in i915_drv.c so a forward declaration is enough.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: dev_priv cleanup in bridge/bar/mmio init code

dev_priv is more appropriate for these so converting saves
some lines of source.

v2: Commit message and keep the pdev local variable. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: More GEM init dev_priv cleanup

Simplifies the code to pass the right parameter in.

v2: Commit message. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Make various init functions take dev_priv

Like GEM init, GUC init, MOCS init and context creation.

Enables them to lose dev_priv locals.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Make GEM object create and create from data take dev_priv

Makes all GEM object constructors consistent.

v2: Fix compilation in GVT code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v1)

drm/i915: Make GEM object alloc/free and stolen created take dev_priv

Where it is more appropriate and also to be consistent with
the direction of the driver.

v2: Leave out object alloc/free inlining. (Joonas Lahtinen)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/lspcon: Enable AUX interrupts for resume time initialization

For LSPCON initialization during system resume we need AUX
functionality, but we call the corresponding encoder reset hook with all
interrupts disabled. Without interrupts we'll do a poll-wait for AUX
transfer completions, which adds a significant delay if the transfers
timeout/need to be retried for some reason.

Fix this by enabling interrupts before calling the reset hooks. Note
that while this will enable AUX interrupts it will keep HPD interrupts
disabled, in a similar way to the init time output setup code.

This issue existed since LSPCON support was added.

v2:
- Rebased on drm-tip.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480448429-27739-1-git-send-email-imre.deak@intel.com

drm/i915/glk: Add a IS_GEN9_LP() macro

Broxton and Geminilake are both gen9lp platforms. To avoid adding
IS_GEMINILAKE() checks everywhere alongside the IS_BROXTON() ones, add a
IS_GEN9_LP() macro.

v2: Rename macro parameter to dev_priv. (Joonas)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915/glk: Add Geminilake PCI IDs

v2: Add new 0x3185 ID. (Joonas)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478791400-21756-4-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915/glk: Introduce Geminilake platform definition

Geminilake is an Intel® Processor containing Intel® HD Graphics
following Broxton.

Let's start by adding the platform definition. PCI IDs and plaform
specific code will follow.

v2: Rebase (don't allow dev to be used with the new macro).

v3: Update ddb size. (Matt)
    Rebase on s/preliminary_hw/alpha/

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479133526-32389-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Create a common GEN9_LP_FEATURE.

The following LP platform inherits a lot of this platform
So let's simplify here to re-use this later.

v2: Keep ddb_size out of the new macro.
v3: Rebase (has_decoupled_mmio). (Imre)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480584796-19466-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915/perf: Treat u64 in uabi as a normal integer

Forgo marking up the u64 integer representing a user pointer as this
just annoys sparse. The conversion from u64 to a user pointer is managed
by u64_to_user_ptr().

Fixes: eec688e1420d ("drm/i915: Add i915 perf infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Robert Bragg <robert@sixbynine.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161130164649.26809-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Remove dummy i915_kick_out_firmware_fb

Since

commit 44adece57e2604cec8527a499b48e4d584ab53b8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 10 18:52:34 2016 +0200

    drm/fb-helper: Add a dummy remove_conflicting_framebuffers

the drm helpers take care of this for us.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161130110131.25668-1-daniel.vetter@ffwll.ch

drm/i915: Initialize dev_priv->atomic_cdclk_freq at init time

Looks like we're only initializing dev_priv->atomic_cdclk_freq
at resume and commit times, not at init time. Let's do that as
well.

We're now hitting the 'WARN_ON(intel_state->cdclk == 0)' in
hsw_compute_linetime_wm() on account of populating
intel_state->cdclk from dev_priv->atomic_cdclk_freq.
Previously we were mispopulating intel_state->cdclk with
dev_priv->cdclk_freq which always had a proper value at init
time and hence the WARN_ON() didn't trigger.

Cc: stable@vger.kernel.org
Cc: Matthew Auld <matthew.auld@intel.com>
Reported-by: Matthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98902
Fixes: e0ca7a6be38c ("drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480428837-4207-1-git-send-email-ville.syrjala@linux.intel.com
Tested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915/guc: Split hw submission for replay after GPU reset

Something I missed before sending off the partial series was that the
non-scheduler guc reset path was broken (in the full series, this is
pushed to the execlists reset handler). The issue is that after a reset,
we have to refill the GuC workqueues, which we do by resubmitting the
requests. However, if we already have submitted them, the fences within
them have already been used and triggering them again is an error.
Instead, just repopulate the guc workqueue.

[  115.858560] [IGT] gem_busy: starting subtest hang-render
[  135.839867] [drm] GPU HANG: ecode 9:0:0xe757fefe, in gem_busy [1716], reason: Hang on render ring, action: reset
[  135.839902] drm/i915: Resetting chip after gpu hang
[  135.839957] [drm] RC6 on
[  135.858351] ------------[ cut here ]------------
[  135.858357] WARNING: CPU: 2 PID: 45 at drivers/gpu/drm/i915/i915_sw_fence.c:108 i915_sw_fence_complete+0x25/0x30
[  135.858357] Modules linked in: rfcomm bnep binfmt_misc nls_iso8859_1 input_leds snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core btusb btrtl snd_hwdep snd_pcm 8250_dw snd_seq_midi hid_lenovo snd_seq_midi_event snd_rawmidi iwlwifi x86_pkg_temp_thermal coretemp snd_seq crct10dif_pclmul snd_seq_device hci_uart snd_timer crc32_pclmul ghash_clmulni_intel idma64 aesni_intel virt_dma btbcm snd btqca aes_x86_64 btintel lrw cfg80211 bluetooth gf128mul glue_helper ablk_helper cryptd soundcore intel_lpss_pci intel_pch_thermal intel_lpss_acpi intel_lpss acpi_als mfd_core kfifo_buf acpi_pad industrialio autofs4 hid_plantronics usbhid dm_mirror dm_region_hash dm_log sdhci_pci ahci sdhci libahci i2c_hid hid
[  135.858389] CPU: 2 PID: 45 Comm: kworker/2:1 Tainted: G        W       4.9.0-rc4+ #238
[  135.858389] Hardware name:                  /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015
[  135.858392] Workqueue: events_long i915_hangcheck_elapsed
[  135.858394]  ffffc900001bf9b8 ffffffff812bb238 0000000000000000 0000000000000000
[  135.858396]  ffffc900001bf9f8 ffffffff8104f621 0000006c00000000 ffff8808296137f8
[  135.858398]  0000000000000a00 ffff8808457a0000 ffff880845764e60 ffff880845760000
[  135.858399] Call Trace:
[  135.858403]  [<ffffffff812bb238>] dump_stack+0x4d/0x65
[  135.858405]  [<ffffffff8104f621>] __warn+0xc1/0xe0
[  135.858406]  [<ffffffff8104f748>] warn_slowpath_null+0x18/0x20
[  135.858408]  [<ffffffff813f8c15>] i915_sw_fence_complete+0x25/0x30
[  135.858410]  [<ffffffff813f8fad>] i915_sw_fence_commit+0xd/0x30
[  135.858412]  [<ffffffff8142e591>] __i915_gem_request_submit+0xe1/0xf0
[  135.858413]  [<ffffffff8142e5c8>] i915_gem_request_submit+0x28/0x40
[  135.858415]  [<ffffffff814433e7>] i915_guc_submit+0x47/0x210
[  135.858417]  [<ffffffff81443e98>] i915_guc_submission_enable+0x468/0x540
[  135.858419]  [<ffffffff81442495>] intel_guc_setup+0x715/0x810
[  135.858421]  [<ffffffff8142b6b4>] i915_gem_init_hw+0x114/0x2a0
[  135.858423]  [<ffffffff813eeaa8>] i915_reset+0xe8/0x120
[  135.858424]  [<ffffffff813f3937>] i915_reset_and_wakeup+0x157/0x180
[  135.858426]  [<ffffffff813f79db>] i915_handle_error+0x1ab/0x230
[  135.858428]  [<ffffffff812c760d>] ? scnprintf+0x4d/0x90
[  135.858430]  [<ffffffff81435985>] i915_hangcheck_elapsed+0x275/0x3d0
[  135.858432]  [<ffffffff810668cf>] process_one_work+0x12f/0x410
[  135.858433]  [<ffffffff81066bf3>] worker_thread+0x43/0x4d0
[  135.858435]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858436]  [<ffffffff81066bb0>] ? process_one_work+0x410/0x410
[  135.858438]  [<ffffffff8106bbb4>] kthread+0xd4/0xf0
[  135.858440]  [<ffffffff8106bae0>] ? kthread_park+0x60/0x60

v2: Only resubmit submitted requests
v3: Don't forget the pending requests have reserved space.

Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-6-chris@chris-wilson.co.uk

drm/i915/guc: Keep the execbuf client allocated across reset

In order to avoid some complexity in trying to reconstruct the
workqueues across reset, remember them instead. The issue comes when we
have to handle a reset between request allocation and submission, the
request has reserved space in the wq, but is not in any list so we fail
to restore the reserved space. By keeping the execbuf client intact
across the reset, we also keep the reservations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-5-chris@chris-wilson.co.uk

drm/i915/guc: Initialise doorbell cookie to matching value

Set the initial value of the doorbell cookie from the client.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-4-chris@chris-wilson.co.uk

drm/i915/guc: Rename client->cookie to match use

The client->cookie is a shadow of the doorbell->cookie value, so rename
it to indicate its association with the doorbell, like the doorbell id
and offset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-3-chris@chris-wilson.co.uk

drm/i915: Trim i915_guc_info() stack usage

i915_guc_info() (part of debugfs output) tries to avoid holding
struct_mutex for a long period by copying onto the stack. This causes a
warning that the stack frame is massive, so stop doing that. We can even
forgo holding the struct_mutex here as that doesn't serialise the values
being read (and the lists used exist for the device lifetime).

v2: Skip printing anything if guc->execbuf_client is disabled (avoids
potential NULL dereference).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129121024.22650-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: enable dp mst audio

This patch adds support for DP MST audio in i915.

Enable audio codec when DP MST is enabled if has_audio flag is set.
Disable audio codec when DP MST is disabled if has_audio flag is set.

Another separated patches to support DP MST audio will be implemented
in audio driver.

This patch is ported from
commit 3708d5e082c3 ("drm/i915: start adding dp mst audio")

And because commit 3708d5e082c3 ("drm/i915: start adding dp mst audio")
breaks MST multi-monitor setups on some platforms, the orignal patch is
reverted by
commit be754b101f70 ("Revert "drm/i915: start adding dp mst audio"")

As the multi-monitor setups issue is fixed, let's port the patch and
enable the dp mst audio.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-3-git-send-email-libin.yang@intel.com

drm/i915: abstract ddi being audio enabled

Prepare for using the same code for judging ddi being audio enabled.
No functional changes.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-2-git-send-email-libin.yang@intel.com

drm/i915/debugfs: add dp mst info

Add the DP MST info dump in debugfs.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480334827-112273-1-git-send-email-libin.yang@intel.com

drm/i915: Fix tracepoint compilation

drivers/gpu/drm/i915/./i915_trace.h: In function ‘trace_event_raw_event_i915_gem_evict’:
drivers/gpu/drm/i915/./i915_trace.h:409:24: error: ‘struct i915_address_space’ has no member named ‘dev’
       __entry->dev = vm->dev->primary->index;

A couple of macros missed in the s/vm->dev/vm->i915/ conversion.

Fixes: 49d73912cbfc ("drm/i915: Convert vm->dev backpointer to vm->i915")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129124205.19351-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>

drm/i915/perf: Wrap 64bit divides in do_div()

Just a couple of naked 64bit divides causing link errors on 32bit
builds, with:

ERROR: "__udivdi3" [drivers/gpu/drm/i915/i915.ko] undefined!

v2: do_div() is only u64/u32, we need a u32/u64!
v3: div_u64() == u64/u32, div64_u64() == u64/u64

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: d79651522e89 ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Robert Bragg <robert@sixbynine.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161123150714.24449-1-chris@chris-wilson.co.uk
Reviewed-by: Robert Bragg <robert@sixbynine.org>

drm/i915: Convert vm->dev backpointer to vm->i915

99% of the time we access i915_address_space->dev we want the i915
device and not the drm device, so let's store the drm_i915_private
backpointer instead. The only real complication here are the inlines
in i915_vma.h where drm_i915_private is not yet defined and so we have
to choose an alternate path for our asserts.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161129095008.32622-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: fix compilation warnings on maybe uninitialized pointers

Two warnings are produced by gcc (tested with gcc 6.2.1):

drivers/gpu/drm/i915/intel_csr.c: In function ‘csr_load_work_fn’:
drivers/gpu/drm/i915/intel_csr.c:400:5: error: ‘fw’ is used
uninitialized in this function [-Werror=uninitialized]
  if (fw)
       ^
and

In file included from drivers/gpu/drm/i915/i915_drv.h:47:0,
                 from drivers/gpu/drm/i915/intel_guc_loader.c:30:
drivers/gpu/drm/i915/intel_guc_loader.c: In function ‘intel_guc_init’:
./include/drm/drmP.h:228:2: error: ‘fw’ may be used uninitialized in this
function  -Werror=maybe-uninitialized]
  drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
  ^~~~~~~~~~
drivers/gpu/drm/i915/intel_guc_loader.c:595:25: note: ‘fw’ was declared here
  const struct firmware *fw;
                         ^~

When CONFIG_DRM_I915_WERROR is set, those warnings break the build.

Initializing fw pointer to NULL in both cases removes the warnings.

Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128234319.20800-1-jeremy.lefaure@lse.epita.fr

drm/i915: Move the release of PT page to the upper caller

a PT page will be released if it doesn't contain any meaningful mappings
during PPGTT page table shrinking. The PT entry in the upper level will
be set to a scratch entry.

Normally this works nicely, but in virtualization world, the PPGTT page
table is tracked by hypervisor. Releasing the PT page before modifying
the upper level PT entry would cause extra efforts.

As the tracked page has been returned to OS before losing track from
hypervisor, it could be written in any pattern. Hypervisor has to recognize
if a page is still being used as a PT page by validating these writing
patterns. It's complicated. Better let the guest modify the PT entry in
upper level PT first, then release the PT page.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhiyuan Lv <zhiyuan.lv@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/122697/msgid/1479728666-25333-1-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480402516-22275-1-git-send-email-zhi.a.wang@intel.com

drm/i915: drop the struct_mutex when wedged or trying to reset

We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged
or a reset is in progress we bail early but never seem to actually
release the lock.

Fixes: 7f1847ebf48b ("drm/i915: Simplify checking of GPU reset_counter in display pageflips")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.7+

Revert "drm/i915/execlists: Use a local lock for dfs_link access"

This reverts commit 27745e829a5c ("drm/i915/execlists: Use a local lock
for dfs_link access") as the struct_mutex was required to prevent
concurrent retiring and freeing, now restored in the previous patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128143649.4289-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Move priority bumping for flips earlier

David found another issue with priority bumping from mmioflips, where we
are accessing the requests concurrently to them being retired and freed.
Whilst we are skipping the dependency if has been submitted, that is not
sufficient to stop the dependency from disappearing if another thread
retires that request. To prevent we can either employ the struct_mutex (or a
request mutex in the future) to serialise retiring before it is freed.
Alternatively, we need to keep the dependencies alive using RCU whilst
they are being accessed via the DFS.

[ 1746.698111] general protection fault: 0000 [#1] PREEMPT SMP
[ 1746.698305] Modules linked in: snd_hda_intel snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core coretemp crct10dif_pclmul crc32_pclmul snd_pcm ghash_clmulni_intel mei_me mei i915 e1000e ptp pps_core i2c_hid
[ 1746.698750] CPU: 1 PID: 6716 Comm: kworker/u8:2 Not tainted 4.9.0-rc6-CI-Nightly_816+ #1
[ 1746.698871] Hardware name: GIGABYTE GB-BKi7A-7500/MFLP7AP-00, BIOS F1 07/27/2016
[ 1746.699125] Workqueue: events_unbound intel_mmio_flip_work_func [i915]
[ 1746.699266] task: ffff880260a5e800 task.stack: ffffc90000f6c000
[ 1746.699361] RIP: 0010:[<ffffffffa006595d>]  [<ffffffffa006595d>] execlists_schedule+0x8d/0x300 [i915]
[ 1746.699632] RSP: 0018:ffffc90000f6fcd8  EFLAGS: 00010206
[ 1746.699724] RAX: dead0000000000f8 RBX: ffff8801f64b2bf0 RCX: ffff8801f64b2c10
[ 1746.699842] RDX: dead000000000100 RSI: 0000000000000000 RDI: ffff8801f64b0458
[ 1746.699972] RBP: ffffc90000f6fd68 R08: ffff88026488dc00 R09: 0000000000000002
[ 1746.700090] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000400
[ 1746.700195] R13: ffffc90000f6fcf0 R14: ffff88020955aa40 R15: ffff88020955aa68
[ 1746.700307] FS:  0000000000000000(0000) GS:ffff88026dc80000(0000) knlGS:0000000000000000
[ 1746.700435] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1746.700532] CR2: 0000000002a69e90 CR3: 0000000002c07000 CR4: 00000000003406e0
[ 1746.700635] Stack:
[ 1746.700682]  ffff880260a5e880 ffffc90000f6fd50 ffffffff810af69a ffffc90000f6fd28
[ 1746.700827]  ffff88020955a628 ffff8801e1eaebf0 0000000000000020 0000000000000000
[ 1746.700947]  00000196af1edc96 ffff88025dfa4000 ffff8801f0b030a8 ffffc90000f6fcf0
[ 1746.701071] Call Trace:
[ 1746.701117]  [<ffffffff810af69a>] ? dequeue_entity+0x25a/0xb50
[ 1746.701260]  [<ffffffffa00516be>] fence_set_priority+0x7e/0x80 [i915]
[ 1746.701406]  [<ffffffffa0051a15>] i915_gem_object_wait_priority+0x85/0x160 [i915]
[ 1746.701599]  [<ffffffffa008ccd7>] intel_mmio_flip_work_func+0x47/0x2b0 [i915]
[ 1746.701717]  [<ffffffff81094c4d>] process_one_work+0x14d/0x470
[ 1746.701809]  [<ffffffff81094fb3>] worker_thread+0x43/0x4e0
[ 1746.701888]  [<ffffffff81094f70>] ? process_one_work+0x470/0x470
[ 1746.701969]  [<ffffffff81094f70>] ? process_one_work+0x470/0x470
[ 1746.702072]  [<ffffffff8109a4d5>] kthread+0xc5/0xe0
[ 1746.702152]  [<ffffffff81771c59>] ? _raw_spin_unlock_irq+0x9/0x10
[ 1746.702234]  [<ffffffff8109a410>] ? kthread_park+0x60/0x60
[ 1746.702318]  [<ffffffff81772272>] ret_from_fork+0x22/0x30
[ 1746.702387] Code: 89 42 08 48 8b 45 88 48 89 55 c0 4c 89 6d c8 4c 8d 70 d8 4d 8d 7e 28 4d 39 ef 74 72 49 8b 1e 48 8b 13 48 39 d3 48 8d 42 f8 74 3e <48> 8b 10 8b 52 38 41 39 d4 7e 26 48 8b 50 30 48 8b 78 28 48 8d
[ 1746.702921] RIP  [<ffffffffa006595d>] execlists_schedule+0x8d/0x300 [i915]
Nov 25 21:42:54 kbl-gbbki7 kernel: [ 1746.703027]  RSP <ffffc90000f6fcd8>

Fixes: 27745e829a5c ("drm/i915/execlists: Use a local lock for dfs_link access")
Fixes: 9a151987d709 ("drm/i915: Add execution priority boosting for mmioflips")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161128143649.4289-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915/guc: Remove spurious include

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-6-git-send-email-arkadiusz.hiler@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Init send_mutex in intel_uc_init_early()

send_mutex is used to serialise communication with GuC via
intel_guc_send().

Since functions that utilize it are no longer limited to submission,
initialization should be handled as a part of general setup.

v2: move initialization to *_early()

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-5-git-send-email-arkadiusz.hiler@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Move guc_{send,recv}() to intel_uc.c

guc_send(), guc_recv() and related functions were introduced in the
i915_guc_submission.c and their scope was limited only to that file.

Those are not submission specific though.
This patch moves moves them to intel_uc.c with intel_ prefix added.

v2: rename intel_guc_log_* functions and clean up intel_guc_send usages

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-4-git-send-email-arkadiusz.hiler@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Drop guc2host/host2guc from names

To facilitate code reorganization we are renaming everything that
contains guc2host or host2guc.

host2guc_action() and host2guc_action_response() become guc_send()
and guc_recv() respectively.

Other host2guc_*() functions become simply guc_*().

Other entities are renamed basing on context they appear in:
 - HOST2GUC_ACTIONS_&           become INTEL_GUC_ACTION_*
 - HOST2GUC_{INTERRUPT,TRIGGER} become GUC_SEND_{INTERRUPT,TRIGGER}
 - GUC2HOST_STATUS_*            become INTEL_GUC_STATUS_*
 - GUC2HOST_MSG_*               become INTEL_GUC_RECV_MSG_*
 - action_lock                 becomes send_mutex

v2: drop unnecessary backslashes and use BIT() instead of '<<'
v3: shortened enum names and INTEL_GUC_STATUS_*

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-3-git-send-email-arkadiusz.hiler@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Rename intel_guc.h to intel_uc.h

GuC is not the only one micro controller we have.

There are also HuC and DMC.

Making the file more general will help with code organization.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-2-git-send-email-arkadiusz.hiler@intel.com

drm/i915: Don't sanitize has_decoupled_mmio if platform is not broxton

The check in __intel_uncore_early_sanitize() to disable decoupled mmio
would disable it for every platform that is not broxton. While that's
not a problem now since only broxton supports that, simply setting
.has_decoupled_mmio in a new platform's device info wouldn't suffice. So
avoid future confusion and change the workaround to only change the
value of has_decoupled_mmio for broxton.

v2: git add compile fix. (Ander)

Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479993807-29353-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Pass dev_priv to intel_setup_outputs()

Pass dev_priv to intel_setup_outputs() and functions called by it, since
those are all intel i915 specific functions. Also, in the majority of
the functions dev_priv is used more often than dev. In the rare cases
where there are a few calls back into drm core, a local dev variable was
added.

v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com

drm/i915: Integrate i915_sw_fence with debugobjects

Add the tracking required to enable debugobjects for fences to improve
error detection in BAT. The debugobject interface lets us track the
lifetime and phases of the fences even while being embedded into larger
structs, i.e. to check they are not used after they have been released.

v2: Don't populate the stubs, debugobjects checks for a NULL pointer and
treats it equivalently.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-4-chris@chris-wilson.co.uk

drm/i915: Hold a reference on the request for its fence chain

Currently, we have an active reference for the request until it is
retired. Though it cannot be retired before it has been executed by
hardware, the request may be completed before we have finished
processing the execute fence, i.e. we may continue to process that fence
as we free the request.

Fixes: 5590af3e115a ("drm/i915: Drive request submission through fence callbacks")
Fixes: 23902e49c999 ("drm/i915: Split request submit/execute phase into two")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-3-chris@chris-wilson.co.uk

drm/i915: Assert no external observers when unwind a failed request alloc

Before we return the request back to the kmem_cache after a failed
i915_gem_request_alloc(), we should assert that it has not been added to
any global state tracking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-2-chris@chris-wilson.co.uk

drm/i915: Add is-completed assert to request retire entrypoint

While we will check that the request is completed prior to being
retired, by placing an assert that the request is complete at the
entrypoint of the function we can more clearly document the function's
preconditions.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161125131718.20978-1-chris@chris-wilson.co.uk

drm/i915/debugfs: Update pageflip information

Show the last submitted seqno to the engine, not the overall next seqno,
as this is more pertinent information when inspecting the pageflip and
whether the CS or display engine stalled.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Rename i915_gem_timeline.next_seqno to .seqno

Rename i915_gem_timeline member 'next_seqno' into 'seqno' as
the variable is pre-increment. We've already had two bugs due
to the confusing name, second is fixed as follow-up patch.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124144750.2610-1-chris@chris-wilson.co.uk

drm/i915/audio: fix hdmi audio noise issue

Some monitors will have noise or even no sound after
applying the patch 6014ac12.

In patch 6014ac12, it will reset the cts value to 0 for HDMI.
However, we need to disable Enable CTS or M Prog bit. This is
the initial setting after HW reset.

Fixes: 6014ac122ed0 ("drm/i915/audio: set proper N/M in modeset")
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478853988-139842-1-git-send-email-libin.yang@intel.com

drm/i915: Use the precomputed value for whether to enable command parsing

As i915.enable_cmd_parser is an unsafe option, make it read-only at
runtime. Now that it is constant, we can use the value determined during
initialisation as to whether we need the cmdparser at execbuffer time.

v2: Remove the inline for its single user, it is clear enough (and
shorter) without!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk

drm/i915/debugfs: Increment return value of gt.next_seqno

The i915_next_seqno read value is to be the next seqno used by the
kernel. However, in the conversion to atomics ops for gt.next_seqno, in
commit 28176ef4cfa5 ("drm/i915: Reserve space in the global seqno during
request allocation"), this was changed from a post-increment to a
pre-increment. This increment was missed from the value reported by
debugfs, so in effect it was reporting the current seqno (last
assigned), not the next seqno.

Fixes: 28176ef4cfa5 ("drm/i915: Reserve space in the global seqno during request allocation")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81209
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124094752.19129-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: kick out cmd_parser specific structs from i915_drv.h

No sense in keeping the cmd_descriptor and cmd_table structs in
i915_drv.h, now that they are no longer referenced externally.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479942147-9837-1-git-send-email-matthew.auld@intel.com

drm/i915: cleanup use of INSTR_CLIENT_MASK

Doing cmd_header >> 29 to extract our 3-bit client value where we know
cmd_header is a u32 shouldn't then also require the use of a mask. So
remove the redundant operation and get rid of INSTR_CLIENT_MASK now that
there are no longer any users.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479163174-29686-1-git-send-email-matthew.auld@intel.com

drm/i915/debugfs: Drop i915_hws_info

i915_hws_info() has not been kept upto date (missing new engines) and so
I consider it to be unused. HWS is included in the error state, which
would be an avenue to retrieving it if required in future (possibly via
i915_engine_info). As it is currently oopsing with an rpm testcase, just
remove it.

Fixes: 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98838
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124093401.18852-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove all ->config dereferences from intel_hdmi, v2.

In all cases we can now obtain the relevant crtc_state/conn_state
from the relevant callbacks, which means all the ->config accesses
can be removed and the code cleaned up.

Changes since v1:
- cstate -> crtc_state

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8b02a6b4-606a-e43a-b357-ad17f491525b@linux.intel.com
[mlankhorst: Reinstate missing comment]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Simplify error handling in intel_modeset_all_pipes()

No need for the extra break statements and whatnot, just return the
error directly. And tighten the scope of the local variables while at
it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Protect dev_priv->atomic_cdclk_freq with all the crtc locks

A modeset on one pipe can update dev_priv->atomic_cdclk_freq without
actually touching the hardware, in which case we won't force a modeset
on all the pipes, and thus won't lock any of the other pipes either.
That means a parallel plane update on another pipe could be looking at
a stale dev_priv->atomic_cdcdlk_freq and thus fail to notice when the
plane configuration is invalid, or potentially reject a valid update.

To overcome this we must protect writes to atomic_cdclk_freq with
all the crtc locks, and thus for reads any single crtc lock will
be sufficient protection.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things

When we end up not recomputing the cdclk, we need to populate
intel_state->cdclk with the "atomic_cdclk_freq" instead of the
current cdclk_freq. When no pipes are active, the actual cdclk_freq
may be lower than what the configuration of the planes and
pipes would require from the point of view of the software state.

This fixes bogus WARNS from skl_max_scale() which is trying to check
the plane software state against the cdclk frequency. So any time
it got called during DPMS off for instance, we might have tripped
the warn if the current mode would have required a higher than
minimum cdclk.

v2: Drop the dev_cdclk stuff (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: bruno.pagani@ens-lyon.org
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Joseph Yasi <joe.yasi@gmail.com>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Joseph Yasi <joe.yasi@gmail.com> (v1)
Cc: stable@vger.kernel.org
Fixes: 1a617b77658e ("drm/i915: Keep track of the cdclk as if all crtc's were active.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98214
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479141311-11904-2-git-send-email-ville.syrjala@linux.intel.com

drm/i915/bxt: Correct dual-link MIPI port control.

For BXT, there is only one bit that enables/disables dual-link mode
and not different bits depending on which pipe is being used.

Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479767046-3964-1-git-send-email-bob.j.paauwe@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Use enum plane_id in VLV/CHV wm code

Let's try not to abuse plane->plane for sprites on VLV/CHV and instead
use plane->id. Since out watermark structures aren't entirely plane type
agnostic (for now) and start indexing sprites from 0  we'll add a small
helper to convert between the two bases.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-7-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use enum plane_id in VLV/CHV sprite code

Use intel_plane->id to derive the VLV/CHV sprite register offsets
instead of abusing plane->plane which is really meant to for
primary planes only.

v2: Convert assert_sprites_disabled() over as well
v3: Rename the reg macro parameter to 'plane_id' as well (Paulo)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-6-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use enum plane_id in SKL plane code

Replace the intel_plane->plane and hardcoded 0 usage in the SKL plane
code with intel_plane->id.

This should make the SKL "primary" and "sprite" code virtually
identical, so the next logical step would likely be dropping one
of the copies.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-5-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Use enum plane_id in SKL wm code

Nuke skl_wm_plane_id() and just use the new intel_plane->id.

v2: Convert skl_write_plane_wm() as well
v3: Convert skl_pipe_wm_get_hw_state() correctly
v4: Rebase due to changes in the wm code
    Drop the cursor FIXME from the total data rate calc (Paulo)
    Use the "[PLANE:%d:%s]" format in debug print (Paulo)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>

drm/i915: Add crtc->plane_ids_mask

Add a mask of which planes are available for each pipe. This doesn't
quite work for old platforms with dynamic plane<->pipe assignment, but
as we don't support that sort of stuff (yet) we can get away with it.

The main use I have for this is the for_each_plane_id_on_crtc() macro
for iterating over all possible planes on the crtc. I suppose we could
not add the mask, and instead iterate by comparing intel_plane->pipe
but then we'd need a local intel_plane variable which is just
unnecessary clutter in some cases. But I'm not hung up on this, so if
people prefer the other option I could be convinced to use it.

v2: Use BIT() in the iterator macro too (Paulo)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-3-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Add per-pipe plane identifier

As I told people in [1] we really should not be confusing enum plane
as a per-pipe plane identifier. Looks like that happened nonetheless, so
let's fix it up by splitting the two into two enums.

We'll also want something we just directly pass to various register
offset macros and whatnot on SKL+. So let's make this new thing work for that.
Currently we pass intel_plane->plane for the "sprites" and just a
hardcoded zero for the "primary" planes. We want to get rid of that
hardocoding so that we can share the same code for all planes (apart
from the legacy cursor of course).

[1] https://lists.freedesktop.org/archives/intel-gfx/2015-September/076082.html

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479830524-7882-2-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Make skl_write_{plane,cursor}_wm() static

Someone forgot to make skl_write_{plane,cursor}_wm() static when
removing the prototypes from the header. Sparse isn't pleased.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: e62929b3f628 ("drm/i915/gen9+: Program watermarks as a separate step during evasion, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479846113-24745-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Lyude <lyude@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: i915_gem_alloc_context_obj can be static

It has only one call site from the same file.

v2: Also rename it to alloc_context_obj. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479898155-21014-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/guc: Remove unused intel_guc_fw struct member

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1479896421-20611-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915/lspcon: Remove unused force change mode parameter

All callers asked for a forced change but the function ignored this
parameter. It doesn't seem to be necessary to force the change in any
case so let's just remove the parameter.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-5-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Wait for expected LSPCON mode to settle

Some LSPCON adaptors may return an incorrect LSPCON mode right after
waking from DP Sleep state. This is the case at least for the ParadTech
PS175 adaptor, both when waking because of exiting the DP Sleep to
active state, or due to any other AUX CH transfer. We can determine the
current expected mode based on whether the DPCD area is accessible,
since according to the LSPCON spec this area is only accesible
in PCON mode.

This wait will avoid us trying to change the mode, while the current
expected mode hasn't settled yet and start link training before the
adaptor thinks it's in PCON mode after waking from DP Sleep state.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-4-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Add dp_to_lspcon helper()

We need to get to LSPCON in the next patch, so factor out the helper for
it. While at it also remove the redundant GEN9 check.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-3-git-send-email-imre.deak@intel.com

drm/i915/lspcon: Ensure AUX CH is awake while in DP Sleep state

Some LSPCON adaptors won't properly wake up in response to an AUX
request after the adaptor was placed to a DP Sink Sleep state (via
writing 0x2 to DP_SET_POWER). Based on the DP 1.4 specification 5.2.5,
the sink may place the AUX CH into a low-power state while in Sleep
state, but should wake it up in response to an AUX request within 1-20ms
(answering with AUX defers while waking it up). As opposed to this at
least the ParadTech PS175 adaptor won't fully wake in response to the
first I2C-over-AUX access and will occasionally ignore the offset in I2C
messages. This can result in accessing the DDC register at offset 0
regardless of the specified offset and the LSPCON detection failing.

To fix this do an initial dummy read from the DPCD area. The PS175 will
defer this access until it's fully woken (taking ~150ms) making sure the
following I2C-over-AUX accesses will work correctly.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=98353
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479755707-29596-2-git-send-email-imre.deak@intel.com

drm/i915: Stop the machine as we install the wedged submit_request handler

In order to prevent a race between the old callback submitting an
incomplete request and i915_gem_set_wedged() installing its nop handler,
we must ensure that the swap occurs when the machine is idle
(stop_machine).

v2: move context lost from out of BKL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-4-chris@chris-wilson.co.uk

drm/i915: Complete requests in nop_submit_request

Since the submit/execute split in commit d55ac5bf97c6 ("drm/i915: Defer
transfer onto execution timeline to actual hw submission") the
global seqno advance was deferred until the submit_request callback.
After wedging the GPU, we were installing a nop_submit_request handler
(to avoid waking up the dead hw) but I had missed converting this over
to the new scheme. Under the new scheme, we have to explicitly call
i915_gem_submit_request() from the submit_request handler to mark the
request as on the hardware. If we don't the request is always pending,
and any waiter will continue to wait indefinitely and hangcheck will not
be able to resolve the lockup.

References: https://bugs.freedesktop.org/show_bug.cgi?id=98748
Testcase: igt/gem_eio/in-flight
Fixes: d55ac5bf97c6 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-3-chris@chris-wilson.co.uk

drm/i915: Disable hangcheck when wedged

If the gpu reset fails and the machine is terminally wedged, further
hangchecks achieve nothing but noise. Disable them, with a corollary
that we re-enable hangchecking after a successful GPU reset in case the
user is artificially bringing the machine back to life through the debug
interface.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-2-chris@chris-wilson.co.uk

drm/i915: Don't deref context->file_priv ERR_PTR upon reset

When a user context is closed, it's file_priv backpointer is replaced by
ERR_PTR(-EBADF); be careful not to chase this invalid pointer after a
hang and a GPU reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b083a0870c79 ("drm/i915: Add per client max context ban limit")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-1-chris@chris-wilson.co.uk

drm/i915: Add a kerneldoc summary for i915_perf.c

In particular this tries to capture for posterity some of the early
challenges we had with using the core perf infrastructure in case we
ever want to revisit adapting perf for device metrics.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-12-robert@sixbynine.org

drm/i915: Add more Haswell OA metric sets

This adds 'compute', 'compute extended', 'memory reads', 'memory writes'
and 'sampler balance' metric sets for Haswell.

The code is auto generated from an XML description of metric sets,
currently maintained in gputop, ref:

 https://github.com/rib/gputop
 > gputop-data/oa-*.xml
 > scripts/i915-perf-kernelgen.py

 $ make -C gputop-data -f Makefile.xml

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-11-robert@sixbynine.org

drm/i915: add dev.i915.oa_max_sample_rate sysctl

The maximum OA sampling frequency is now configurable via a
dev.i915.oa_max_sample_rate sysctl parameter.

Following the precedent set by perf's similar
kernel.perf_event_max_sample_rate the default maximum rate is 100000Hz

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-10-robert@sixbynine.org

drm/i915: Add dev.i915.perf_stream_paranoid sysctl option

Consistent with the kernel.perf_event_paranoid sysctl option that can
allow non-root users to access system wide cpu metrics, this can
optionally allow non-root users to access system wide OA counter metrics
from Gen graphics hardware.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-9-robert@sixbynine.org

drm/i915: advertise available metrics via sysfs

Each metric set is given a sysfs entry like:

/sys/class/drm/card0/metrics/<guid>/id

This allows userspace to enumerate the specific sets that are available
for the current system. The 'id' file contains an unsigned integer that
can be used to open the associated metric set via
DRM_IOCTL_I915_PERF_OPEN. The <guid> is a globally unique ID for a
specific OA unit register configuration that can be reliably used by
userspace as a key to lookup corresponding counter meta data and
normalization equations.

The guid registry is currently maintained as part of gputop along with
the XML metric set descriptions and code generation scripts, ref:

 https://github.com/rib/gputop
 > gputop-data/guids.xml
 > scripts/update-guids.py
 > gputop-data/oa-*.xml
 > scripts/i915-perf-kernelgen.py

 $ make -C gputop-data -f Makefile.xml SYSFS=1 WHITELIST=RenderBasic

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-8-robert@sixbynine.org

drm/i915: Enable i915 perf stream for Haswell OA unit

Gen graphics hardware can be set up to periodically write snapshots of
performance counters into a circular buffer via its Observation
Architecture and this patch exposes that capability to userspace via the
i915 perf interface.

v2:
   Make sure to initialize ->specific_ctx_id when opening, without
   relying on _pin_notify hook, in case ctx already pinned.
v3:
   Revert back to pinning ctx upfront when opening stream, removing
   need to hook in to pinning and to update OACONTROL on the fly.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-7-robert@sixbynine.org

drm/i915: Add 'render basic' Haswell OA unit config

Adds a static OA unit, MUX + B Counter configuration for basic render
metrics on Haswell. This is auto generated from an XML
description of metric sets, currently maintained in gputop, ref:

  https://github.com/rib/gputop
  > gputop-data/oa-*.xml
  > scripts/i915-perf-kernelgen.py

  $ make -C gputop-data -f Makefile.xml SYSFS=0 WHITELIST=RenderBasic

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-6-robert@sixbynine.org

drm/i915: don't whitelist oacontrol in cmd parser

Being able to program OACONTROL from a non-privileged batch buffer is
not sufficient to be able to configure the OA unit. This was originally
allowed to help enable Mesa to expose OA counters via the
INTEL_performance_query extension, but the current implementation based
on programming OACONTROL via a batch buffer isn't able to report useable
data without a more complete OA unit configuration. Mesa handles the
possibility that writes to OACONTROL may not be allowed and so only
advertises the extension after explicitly testing that a write to
OACONTROL succeeds. Based on this; removing OACONTROL from the whitelist
should be ok for userspace.

Removing this simplifies adding a new kernel api for configuring the OA
unit without needing to consider the possibility that userspace might
trample on OACONTROL state which we'd like to start managing within
the kernel instead. In particular running any Mesa based GL application
currently results in clearing OACONTROL when initializing which would
disable the capturing of metrics.

v2:
    This bumps the command parser version from 8 to 9, as the change is
    visible to userspace.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108125148.25007-1-robert@sixbynine.org

drm/i915: return EACCES for check_cmd() failures

check_cmd() is checking whether a command adheres to certain
restrictions that ensure it's safe to execute within a privileged batch
buffer. Returning false implies a privilege problem, not that the
command is invalid.

The distinction makes the difference between allowing the buffer to be
executed as an unprivileged batch buffer or returning an EINVAL error to
userspace without executing anything.

In a case where userspace may want to test whether it can successfully
write to a register that needs privileges the distinction may be
important and an EINVAL error may be considered fatal.

In particular this is currently true for Mesa, which includes a test for
whether OACONTROL can be written too, but Mesa treats any error when
flushing a batch buffer as fatal, calling exit(1).

As it is currently Mesa can gracefully handle a failure to write to
OACONTROL if the command parser is disabled, but if we were to remove
OACONTROL from the parser's whitelist then the returned EINVAL would
break Mesa applications as they attempt an OACONTROL write.

This bumps the command parser version from 7 to 8, as the change is
visible to userspace.

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-4-robert@sixbynine.org

drm/i915: rename OACONTROL GEN7_OACONTROL

OACONTROL changes quite a bit for gen8, with some bits split out into a
per-context OACTXCONTROL register. Rename now before adding more gen7 OA
registers

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-3-robert@sixbynine.org

drm/i915: Add i915 perf infrastructure

Adds base i915 perf infrastructure for Gen performance metrics.

This adds a DRM_IOCTL_I915_PERF_OPEN ioctl that takes an array of uint64
properties to configure a stream of metrics and returns a new fd usable
with standard VFS system calls including read() to read typed and sized
records; ioctl() to enable or disable capture and poll() to wait for
data.

A stream is opened something like:

  uint64_t properties[] = {
      /* Single context sampling */
      DRM_I915_PERF_PROP_CTX_HANDLE,        ctx_handle,

      /* Include OA reports in samples */
      DRM_I915_PERF_PROP_SAMPLE_OA,         true,

      /* OA unit configuration */
      DRM_I915_PERF_PROP_OA_METRICS_SET,    metrics_set_id,
      DRM_I915_PERF_PROP_OA_FORMAT,         report_format,
      DRM_I915_PERF_PROP_OA_EXPONENT,       period_exponent,
   };
   struct drm_i915_perf_open_param parm = {
      .flags = I915_PERF_FLAG_FD_CLOEXEC |
               I915_PERF_FLAG_FD_NONBLOCK |
               I915_PERF_FLAG_DISABLED,
      .properties_ptr = (uint64_t)properties,
      .num_properties = sizeof(properties) / 16,
   };
   int fd = drmIoctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, &param);

Records read all start with a common { type, size } header with
DRM_I915_PERF_RECORD_SAMPLE being of most interest. Sample records
contain an extensible number of fields and it's the
DRM_I915_PERF_PROP_SAMPLE_xyz properties given when opening that
determine what's included in every sample.

No specific streams are supported yet so any attempt to open a stream
will return an error.

v2:
    use i915_gem_context_get() - Chris Wilson
v3:
    update read() interface to avoid passing state struct - Chris Wilson
    fix some rebase fallout, with i915-perf init/deinit
v4:
    s/DRM_IORW/DRM_IOW/ - Emil Velikov

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-2-robert@sixbynine.org

drm/i915: Wipe hang stats as an embedded struct

Bannable property, banned status, guilty and active counts are
properties of i915_gem_context. Make them so.

v2: rebase

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479309634-28574-1-git-send-email-mika.kuoppala@intel.com

drm/i915: Add per client max context ban limit

If we have a bad client submitting unfavourably across different
contexts, creating new ones, the per context scoring of badness
doesn't remove the root cause, the offending client.
To counter, keep track of per client context bans. Deny access if
client is responsible for more than 3 context bans in
it's lifetime.

v2: move ban check to context create ioctl (Chris)
v3: add commentary about hangs needed to reach client ban (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Add bannable context parameter

Now when driver has per context scoring of 'hanging badness'
and also subsequent hangs during short windows are allowed,
if there is progress made in between, it does not make sense
to expose a ban timing window as a context parameter anymore.

Let the scoring be the sole indicator for ban policy and substitute
ban period context parameter as a boolean to get/set context
bannable property.

v2: allow non root to opt into being banned (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Use request retirement as context progress

As hangcheck score was removed, the active decay of score
was removed also. This removed feature for hangcheck to detect
if the gpu client was accidentally or maliciously causing intermittent
hangs. Reinstate the scoring as a per context property, so that if
one context starts to act unfavourably, ban it.

v2: ban_period_secs as a gate to score check (Chris)
v3: decay in proper spot. scores as tunables (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Decouple hang detection from hangcheck period

Hangcheck state accumulation has gained more steps
along the years, like head movement and more recently the
subunit inactivity check. As the subunit sampling is only
done if the previous state check showed inactivity, we
have added more stages (and time) to reach a hang verdict.

Asymmetric engine states led to different actual weight of
'one hangcheck unit' and it was demonstrated in some
hangs that due to difference in stages, simpler engines
were accused falsely of a hang as their scoring was much
more quicker to accumulate above the hang treshold.

To completely decouple the hangcheck guilty score
from the hangcheck period, convert hangcheck score to a
rough period of inactivity measurement. As these are
tracked as jiffies, they are meaningful also across
reset boundaries. This makes finding a guilty engine
more accurate across multi engine activity scenarios,
especially across asymmetric engines.

We lose the ability to detect cross batch malicious attempts
to hinder the progress. Plan is to move this functionality
to be part of context banning which is more natural fit,
later in the series.

v2: use time_before macros (Chris)
    reinstate the pardoning of moving engine after hc (Chris)
v3: avoid global state for per engine stall detection (Chris)
v4: take timeline last retirement into account (Chris)
v5: do debug print on pardoning, split out retirement timestamp (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Split up hangcheck phases

In order to simplify hangcheck state keeping, split hangcheck
per engine loop in three phases: state load, action, state save.

Add few more hangcheck actions to separate between seqno, head
and subunit movements. This helps to gather all the hangcheck
actions under a single switch umbrella.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Add more keywords to firmware loading message

To find out what firmware we actually loaded (from dmesg) the explicit
'dmc' and 'firmware' are missing from the info printout. Add them.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479288806-17355-1-git-send-email-mika.kuoppala@intel.com

drm/i915: Use num_scalers instead of SKL_NUM_SCALERS in debugfs

Better to use num_scaler itself while printing scaler_info.
This fixes a bug of printing information for the missing
second scaler on pipe C for SKL platform.

Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479664226-22307-1-git-send-email-sunil.kamath@intel.com

drm/i915: Add a warning on shutdown if signal threads still active

When unloading the module, it is expected that we have finished
executing all requests and so the signal threads should be idle. Add a
warning in case there are any residual requests in the signaler rbtrees
at that point.

v2: We can also warn if there are any waiters

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161121110759.22896-1-chris@chris-wilson.co.uk

drm/i915: Use user, not driver, DRM_DEBUG for 2 context ioctls

For user actions, such as the context ioctls, we prefer to use DRM_DEBUG
rather than DRM_DEBUG_DRIVER as currently used.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161121113109.1976-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20161121

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Skip final clflush if LLC is coherent

If the LLC is coherent with the object, we do not need to worry about
whether main memory and cache mismatch when we hand the object back to
the system.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-2-chris@chris-wilson.co.uk

drm/i915: Always flush the dirty CPU cache when pinning the scanout

Currently we only clflush the scanout if it is in the CPU domain. Also
flush if we have a pending CPU clflush. We also want to treat the
dirtyfb path similar, and flush any pending writes there as well.

v2: Only send the fb flush message if flushing the dirt on flip
v3: Make flush-for-flip and dirtyfb look more alike since they serve
similar roles as end-of-frame marker.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v2
Link: http://patchwork.freedesktop.org/patch/msgid/20161118211747.25197-1-chris@chris-wilson.co.uk

drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error

On the DMA mapping error path, sg may be NULL (it has already been
marked as the last scatterlist entry), and we should avoid dereferencing
it again.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e227330223a7 ("drm/i915: avoid leaking DMA mappings")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20161114112930.2033-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>