David Bauer [Sat, 31 Jul 2021 10:36:40 +0000 (12:36 +0200)]
generic: add missing ARM64 crypto Kconfig symbols
bcm27xx-bcm2710 builds are stalling when compiled with V=s.
Explitily disable these unset symbols to avoid stalling
builds.
Signed-off-by: David Bauer <mail@david-bauer.net>
Hans Dedecker [Sat, 31 Jul 2021 19:24:14 +0000 (21:24 +0200)]
odhcp6c: update to latest git HEAD
94adc8b odhcp6c: use strpbrk to provide get_sep_pos
e0d9a4b cmake: enable extra compiler checks
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
John Audia [Sat, 31 Jul 2021 10:53:10 +0000 (06:53 -0400)]
kernel: bump 5.4 to 5.4.137
Automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Wed, 28 Jul 2021 12:29:03 +0000 (08:29 -0400)]
kernel: bump 5.4 to 5.4.136
All patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Sun, 25 Jul 2021 18:36:53 +0000 (14:36 -0400)]
kernel: bump 5.4 to 5.4.135
All patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
David Bauer [Thu, 29 Jul 2021 20:57:24 +0000 (22:57 +0200)]
generic: add missing Kconfig symbol
Fixes build errors for sunxi as well as rockchip targets.
Signed-off-by: David Bauer <mail@david-bauer.net>
Rafał Miłecki [Fri, 30 Jul 2021 11:02:41 +0000 (13:02 +0200)]
otrx: use firmware-utils.git to avoid code duplication
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Fri, 30 Jul 2021 01:11:45 +0000 (02:11 +0100)]
fstools: update to git HEAD
b7bf185 blockd: make most calls to 'block' asynchronous
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Wed, 28 Jul 2021 14:53:41 +0000 (15:53 +0100)]
kernel: bump 5.10 to 5.10.54
Deleted (upstreamed) patches:
mediatek/patches-5.10/000-spi-fix-fifo.patch
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rui Salvaterra [Sun, 25 Jul 2021 20:00:58 +0000 (21:00 +0100)]
kernel: bump 5.10 to 5.10.53
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
David Bauer [Thu, 29 Jul 2021 18:28:10 +0000 (20:28 +0200)]
generic: fix build warning
Fixes a unused variable warning:
drivers/of/of_net.c: In function 'of_get_mac_address_mtd':
drivers/of/of_net.c:92:19: warning: unused variable 'prop' [-Wunused-variable]
Signed-off-by: David Bauer <mail@david-bauer.net>
Nick Hainke [Wed, 28 Jul 2021 21:18:01 +0000 (23:18 +0200)]
mediatek: mt7623: import patch to fix msi warning
The 1st generation MediaTek PCIe host bridge cannot handle Message
Signaled Interrupts (MSIs). The core PCI code is not aware that MSI is
not available. This results in warnings of the form:
WARNING: CPU: 2 PID: 112 at include/linux/msi.h:219
pci_msi_setup_msi_irqs.constprop.8+0x64/0x6c
Modules linked in: ahci(+) libahci libata sd_mod scsi_mod
gpio_button_hotplug
CPU: 2 PID: 112 Comm: kmodloader Not tainted 5.10.52 #0
Hardware name: Mediatek Cortex-A7 (Device Tree)
Import patches that introduce the 'no_msi' attribute to signal missing
MSI support to the core PCI.
Refresh patches:
- 000-spi-fix-fifo.patch
- 330-mtk-bmt-support.patch
- 510-net-mediatek-add-flow-offload-for-mt7623.patch
- 601-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch
- 610-pcie-mediatek-fix-clearing-interrupt-status.patch
- 700-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch
- 710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rafał Miłecki [Thu, 29 Jul 2021 12:53:29 +0000 (14:53 +0200)]
bcm53xx: refresh kernel 5.10 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 29 Jul 2021 11:50:19 +0000 (13:50 +0200)]
bcm53xx: add testing support for kernel 5.10
It still requires fixing PCIe support:
[ 6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@
18000000/pcie@12000 ranges:
[ 6.652217] pcie_iproc_bcma bcma0:7: No bus range found for /axi@
18000000/pcie@12000, using [bus 00-ff]
[ 6.661833] OF: /axi@
18000000/pcie@12000: Missing device_type
[ 6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12
[ 6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@
18000000/pcie@13000 ranges:
[ 6.681514] pcie_iproc_bcma bcma0:8: No bus range found for /axi@
18000000/pcie@13000, using [bus 00-ff]
[ 6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12
[ 6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@
18000000/pcie@14000 ranges:
[ 6.705048] pcie_iproc_bcma bcma0:9: No bus range found for /axi@
18000000/pcie@14000, using [bus 00-ff]
[ 6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 29 Jul 2021 11:48:41 +0000 (13:48 +0200)]
kernel: fix bgmac compilation in kernel 5.10
It's required since upstream kernel commit
4bdc0d676a64 ("remove
ioremap_nocache and devm_ioremap_nocache").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
David Bauer [Thu, 29 Jul 2021 06:45:24 +0000 (08:45 +0200)]
generic: fix compile-error for non-mtd platforms
Fixes commit
cd39aba402ea ("generic: write back netdev MAC-address to device-tree")
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 28 Jul 2021 22:29:53 +0000 (00:29 +0200)]
generic: write back netdev MAC-address to device-tree
The label-mac logic relies on the mac-address property of a netdev
devices of-node. However, the mac address can also be stored as a
different property or read from e.g. an mtd device.
Create this node when reading a mac-address from OF if it does not
already exist and copy the mac-address used for the device to this
property. This way, the MAC address can be accessed using procfs.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Wed, 28 Jul 2021 19:25:12 +0000 (20:25 +0100)]
fstools: update to git HEAD
46d02c2 block: don't add non-ubifs ubi devices
cc63933 blockd: send mount.ready when startup has completed
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Wed, 28 Jul 2021 12:17:13 +0000 (14:17 +0200)]
ath79: fix JT-OR750i switch LED assignment
The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate
the LED on port 3 and vice versa.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 28 Jul 2021 11:52:22 +0000 (13:52 +0200)]
ath79: enable missing pinmux for JT-OR750i
Without explicit configuration of these pins the ethernet as well as
status LED of the device do not work correctly.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Wed, 28 Jul 2021 11:38:07 +0000 (13:38 +0200)]
Revert "generic: add mac-address property for NVMEM mac addresses"
This reverts commit
b30924873062be47250e6b872347461c8221688d.
This commit could create a property without allocated memory, breaking
subsequent reads over a nodes property. Also, the mac-address-increment
was not applied when reading from nvmem.
Revert this commit for now, which breaks the label-mac-address logic.
Possibly, traversing the device-tree from the netdev side is easier
anyways.
Signed-off-by: David Bauer <mail@david-bauer.net>
Vincent Wiemann [Sun, 20 Jun 2021 14:56:21 +0000 (16:56 +0200)]
ath79: add support for Joy-IT JT-OR750i
Specifications:
* QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM
* 802.11n 2T2R (external antennas)
* QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas)
* 3x 10/100 LAN, 1x 10/100 WAN
* UART header with pinout printed on PCB
Installation:
* The device comes with a bootloader installed only
* The bootloader offers DHCP and is reachable at http://10.123.123.1
* Accept the agreement and flash sysupgrade.bin
* Use Firefox if flashing does not work
TFTP recovery with static IP:
* Rename sysupgrade.bin to jt-or750i_firmware.bin
* Offer it via TFTP server at 192.168.0.66
* Keep the reset button pressed for 4 seconds after connecting power
TFTP recovery with dynamic IP:
* Rename sysupgrade.bin to jt-or750i_firmware.bin
* Offer it via TFTP server with a DHCP server running at the same address
* Keep the reset button pressed for 6 seconds after connecting power
Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
Felix Fietkau [Wed, 28 Jul 2021 10:08:47 +0000 (12:08 +0200)]
hostapd: add missing chunk for the snoop interface fix
Fixes: 7b46377a0cd9 ("hostapd: make the snooping interface (for proxyarp) configurable")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 28 Jul 2021 03:54:29 +0000 (05:54 +0200)]
hostapd: make proxyarp work with libnl-tiny
Remove a dependency on libnl3-route
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 28 Jul 2021 03:48:38 +0000 (05:48 +0200)]
hostapd: fix a segfault on sta disconnect with proxy arp enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 27 Jul 2021 18:28:58 +0000 (20:28 +0200)]
hostapd: make the snooping interface (for proxyarp) configurable
Use the VLAN interface instead of the bridge, to ensure that hostapd receives
untagged DHCP packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 26 Jul 2021 18:42:48 +0000 (20:42 +0200)]
netifd: update to the latest version
440eb0647708 bridge: fix regression in bringing up bridge ports
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Sun, 25 Jul 2021 14:11:29 +0000 (16:11 +0200)]
mediatek: Fix Fidelix-FM35X1GA patch
This patch did not apply cleanly any more after support for the XTX
flash was added to the generic patches.
Fixes: 92012dd8677a ("kernel: Add support for XTX XT26G02A SPI NAND")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 25 Jul 2021 12:51:22 +0000 (14:51 +0200)]
procd: update to git HEAD
f26233e watchdog: Add an info message if the watchdog reset the system
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Andre Heider [Tue, 8 Jun 2021 03:42:51 +0000 (05:42 +0200)]
arm-trusted-firmware-mvebu: switch to CZ.NIC's Secure Firmware
CZ.NIC as part of Turris project released free and open source WTMI
application firmware wtmi_app.bin for all Armada 3720 devices.
This firmware includes additional features like access to Hardware
Random Number Generator of Armada 3720 SoC which original Marvell's
fuse.bin image does not have.
Add a patch which allows to pass the commit id, so the firmware is able
to identify itself, see
a04bffeb.
Add a patch to disable linking with gold, since the ARM toolchain
doesn't ship gold.
Cherry-pick the 3 post-release fixes.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 8 Jun 2021 06:31:39 +0000 (08:31 +0200)]
arm-trusted-firmware-mvebu: update CM3 toolchain to v10.2
Linaro stopped shipping binary toolchains quite some time ago, switch over to
the ARM builds.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 8 Jun 2021 02:20:54 +0000 (04:20 +0200)]
arm-trusted-firmware-mvebu: update mv-ddr-marvell to current master
02e23db fix compilation errors popped up by GCC-10
7c35173 Merge pull request #29 from pali/sync-a38x-uboot
bb734f5 mv_ddr: a38x: Use SOC_REGS_PHY_BASE for INTER_REGS_BASE
ee1ea84 mv_ddr: a38x: Fix ddr3 compilation
70f3e2e mv_ddr: Fix comment typo
dd960b4 mv_ddr: ddr3: Allow boards to specify CK_DELAY parameter
a87f4f7 mv_ddr: ddr3: only use active chip-selects when tuning ODT
3defcec mv_ddr: a38x: Add support for setting timing in hws_topology_map
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 8 Jun 2021 02:20:26 +0000 (04:20 +0200)]
arm-trusted-firmware-mvebu: update a3700-tools to current master
2efdb10 wtmi: Fix calculation of UART divider
4247e39 fix: twin die ddr porting guide
8ad7992 sys_init: Add missing newlines in debug mode
4ddea19 avs: Validate VDD value from OTP
c444aeb avs: Fix description for avs value 0x2e
1915b78 tim: Optimize code generated by gettimver.sh and print newline
21f566d tim: Print mv_ddr version and configuration on UART
840b70b tim: Use variable $DDRFILE where possible
c10e6ae tim: Fix waiting for UART TX ready
7bf95cf wtmi: Wait 3ms for the TX on UART to be empty prior resetting TX FIFO
63e8433 wtmi: Add "dirty" suffix to git commit and rebuild sys_init.bin binary when VERSION changes
e949b58 wtmi: During setup clock phase print CPU and DDR speed
10376b5 wtmi: Flush output on UART after the '\n' character
509c647 Makefile: Check that specified DDR_TOPOLOGY option is valid
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 8 Jun 2021 02:19:59 +0000 (04:19 +0200)]
arm-trusted-firmware-mvebu: update to v2.5
Revert to using the checked in `tbb_linux` image tool binary since building
it drags in the rather big Crypto++ project.
Cherry-pick the post-release UART fixes.
Switch to AUTORELEASE while at it.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 8 Jun 2021 02:19:16 +0000 (04:19 +0200)]
arm-trusted-firmware-mvebu: remove unpacked sources upon clean
These are all unpacked in the Build/Prepare step, clean up accordingly.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Andre Heider [Tue, 8 Jun 2021 01:53:00 +0000 (03:53 +0200)]
uboot-mvebu: update to v2021.07
Refresh the patches.
Switch to AUTORELEASE while at it.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Marek Behún [Thu, 15 Jul 2021 18:48:33 +0000 (20:48 +0200)]
uboot-envtools: mvebu: update uci defaults for Turris Omnia
From version 2021.09 U-Boot will fixup Turris Omnia's DTB before
booting, separating U-Boot's environment into separate MTD partition
"u-boot-env" [1].
Check if "u-boot-env" MTD partition exists and set the uci defaults
accordingly.
[1] https://lists.denx.de/pipermail/u-boot/2021-July/455017.html
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Tomasz Maciej Nowak [Mon, 12 Jul 2021 16:16:30 +0000 (18:16 +0200)]
mvebu: limit mvneta tx queue workaround to 32 bit SoC
This patch has been carried since introduction throughout every kernel
major bump and no one has tested if the later kernels improved the
situation. The Armada 3720 SoC can only process GbE interrupts on Core 0
and this is already limited in all stable kernels, so ditch this
workaround for 64 bit SoCs.
Ref: https://git.kernel.org/torvalds/c/
cf9bf871280d
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Martin Schiller [Wed, 21 Jul 2021 08:22:39 +0000 (10:22 +0200)]
layerscape: armv8_64b: enable Microsemi phy driver for FRWY-LS1046A
Enable the Microsemi phy driver to support the VSC8514 QSGMII phy on the
FRWY-LS1046A board.
Otherwise, the "Generic PHY" driver is used.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Tue, 20 Jul 2021 07:47:59 +0000 (09:47 +0200)]
layerscape: fix config restore for FRWY-LS1046A
commit
2c2d77bd3bd4 ("layerscape: add FRWY-LS1046A board support")
missed to add an entry to the 79_move_config preinit script.
Therefore, the config transfer on sysupgrade wass broken for this device.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Thomas Nixon [Sat, 26 Jun 2021 12:05:16 +0000 (13:05 +0100)]
Revert "realtek: Fix failsafe mode"
This reverts commit
b7ee0786b56d1088c195fe7c1cdb1ad7d20c9245.
With the previous commit "realtek: remove rtl83xx vlan 1 special cases"
this is no longer required.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Thomas Nixon [Sat, 26 Jun 2021 12:50:12 +0000 (12:50 +0000)]
realtek: remove rtl83xx vlan 1 special cases
On reset, the PVID of all ports is set to 1; if this is reset to 0,
the special cases for VLAN 1 are no longer required.
port_vlan_add is called with vid=0 when the DSA port interfaces are
enabled with no VLAN; previously the VLAN was not configured in this
case, relying on VLAN 1 being present, but with the PVID set to 0,
configuring VLAN 0 as normal works as expected.
Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
Damien Mascord [Tue, 13 Jul 2021 01:07:36 +0000 (11:07 +1000)]
linux-firmware: add 2G and 5G precal binaries for QCA99X0
Some devices (such as Extreme Networks WS-AP3959i-ROW) do not contain
precal binaries in ART, and the precal in the cards eeprom causes
firmware load errors.
These firmware files were previously in linux-firmware,
so these are adding them back and renaming to be cleaner.
Signed-off-by: Damien Mascord <tusker@tusker.org>
Rui Salvaterra [Sun, 18 Jul 2021 23:56:46 +0000 (00:56 +0100)]
elfutils: fix building with GCC 11
Add a patch to fix building with GCC 11, which triggers new warnings by
enabling -Warray-parameter by default.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rui Salvaterra [Mon, 19 Jul 2021 11:09:38 +0000 (12:09 +0100)]
toolchain/binutils: add binutils 2.37
Tested on ath79/generic, without issues.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rui Salvaterra [Sun, 18 Jul 2021 23:48:55 +0000 (00:48 +0100)]
kernel/generic: sort the 5.10 kconfig symbols
Sort the kernel configuration using scripts/kconfig.pl.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rui Salvaterra [Sun, 18 Jul 2021 23:48:54 +0000 (00:48 +0100)]
kernel/generic: add a missing symbol to the 5.10 kconfig
Add CONFIG_HAVE_ARM_ARCH_TIMER (disabled). A make kernel_oldconfig on cortexa9
will otherwise prompt for its selection. The 5.4 configuration already contains
the same symbol.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
John Audia [Tue, 20 Jul 2021 16:23:02 +0000 (12:23 -0400)]
kernel: bump 5.4 to 5.4.134
All patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Mon, 19 Jul 2021 09:17:10 +0000 (05:17 -0400)]
kernel: bump 5.4 to 5.4.133
Manually rebased:
pending-5.4/690-net-add-support-for-threaded-NAPI-polling.patch
All other patches automatically rebased.
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Rui Salvaterra [Wed, 21 Jul 2021 15:49:05 +0000 (16:49 +0100)]
kernel: bump 5.10 to 5.10.52
Add the new CONFIG_BATTERY_RT5033 to the generic configuration, as reported by
Paul Blazejowski. Resort the kconfig while at it.
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Felix Matouschek [Fri, 2 Jul 2021 20:22:02 +0000 (22:22 +0200)]
kernel: Add support for XTX XT26G02A SPI NAND
This chip is used on Teltonika RUTX boards.
Signed-off-by: Felix Matouschek <felix@matouschek.org>
Vladimir Markovets [Wed, 21 Jul 2021 22:09:22 +0000 (00:09 +0200)]
kernel: backport workaround for Realtek RTL8672 and RTL9601C chips
Adds support for GPON SFP modules based on the Realtek RTL8672 and
RTL9601C chips, including but not limited to:
* V-SOL V2801F
* C-Data FD511GX-RM0
* OPTON GP801R
* BAUDCOM BD-1234-SFM
* CPGOS03-0490 v2.0
* Ubiquiti U-Fiber Instant
* EXOT EGS1
Signed-off-by: Vladimir Markovets <abam_a@yahoo.com>
Rui Salvaterra [Fri, 23 Jul 2021 12:34:49 +0000 (13:34 +0100)]
kernel/generic: fix the arm gc-sections patch
Latest binutils (2.37) exposed a long-standing bug. The kernel linking stage
would break at the SORTTAB step, due to the exception table having been
previously purged from vmlinux, as its section wasn't marked as unconditionally
kept. Fix thusly.
Additionally, the "#define ARM_MMU_DISCARD(x) KEEP(x)" change is bogus. It
would only apply to !CONFIG_MMU devices (which we don't support in OpenWrt), and
it would even break the build if referenced. Drop it.
While at it, rename the patch in order to make it obvious that it's
arm-specific.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[Add same changes for kernel 5.4 too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 25 Jul 2021 04:26:20 +0000 (06:26 +0200)]
netifd: update to the latest version
85f01c44a950 bridge: check bridge port vlan membership on link-up events
17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Sat, 24 Jul 2021 23:56:08 +0000 (00:56 +0100)]
procd: update to git HEAD
772292e uxc: don't restart containers when mount shows up
3a9d910 uxc: resolve volume UUIDs by name of UCI fstab section
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Sat, 24 Jul 2021 10:55:20 +0000 (12:55 +0200)]
mediatek: mt7623: import patch to fix spi
The patch fixes the fifo rx mode for the mt7623. It is already accepted
upstream for Linux Kernel 5.15.
To test the spi we can change the dts file to
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins_a>;
status = "okay";
spidev: spidev@0 {
compatible = "linux,spidev";
spi-max-frequency = <
1000000>;
reg = <0>;
};
};
Afterwards we should see a spidev device under /dev/.
To test it we can further use spidev-test.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Daniel Golle [Sat, 24 Jul 2021 00:13:00 +0000 (01:13 +0100)]
fstools: update to git HEAD (again)
a846c6b blockd: fix length of timeout int passed to ioctl
1d681ca block: support umount device basename
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 23 Jul 2021 23:00:22 +0000 (00:00 +0100)]
fstools: update to git HEAD
59f7c11 blockd: create mountpoint parent folder if needed
9cc96af Revert "block: resolve /dev/mapper/* name for /dev/dm-0 when hotplugging"
06334ac Revert "blockd: detect mountpoint of /dev/mapper/*"
9ab3551 block: use /dev/dm-* instead of /dev/mapper/*
5114595 block: allow remove hotplug event to arrive at blockd
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ansuel Smith [Fri, 23 Jul 2021 10:43:35 +0000 (12:43 +0200)]
generic: fix mediatek and dsa not detecting mac-addr from nvmem
Nvmem require the device node to be registered with the of_platform.
Register the device node so that nvmem can correctly find the dev and
correctly load the mac-addr stored in the nvmem cell declared in the dts.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Stijn Tintel [Thu, 22 Jul 2021 13:37:12 +0000 (16:37 +0300)]
kernel: add missing symbol to kmod-qlcnic
When the kmod-qlcnic package is built on targets that have
CONFIG_PCI_IOV enabled, the CONFIG_QLCNIC_SRIOV symbol is exposed.
Enable this symbol in the kmod package to fix its build.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
DENG Qingfang [Wed, 23 Jun 2021 15:37:25 +0000 (23:37 +0800)]
ramips: mt7621: remove bring up DSA master init script
With commit
2e17c710954b, there is no need to bring up DSA master port
manually.
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Paul Blazejowski [Wed, 21 Jul 2021 22:28:20 +0000 (18:28 -0400)]
ath79: kernel: Add missing quote to drivers/mfd/Kconfig
A missing quote in target/linux/ath79/patches-5.x/920-mikrotik-rb4xx.patch
produces:
...
scripts/kconfig/conf --syncconfig Kconfig
drivers/mfd/Kconfig:2016:warning: multi-line strings not supported
...
This patch adds missing closing quote, fixing the above warning.
Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
David Bauer [Tue, 20 Jul 2021 20:00:10 +0000 (22:00 +0200)]
generic: add mac-address property for NVMEM mac addresses
Traversing the device-tree by referencing a network device to determine
a devices labe-mac does not work with the generic nvmem implementation,
as the userspace expects the MAC-address to be available as a
device-tree property.
The legacy mtd-mac-address implementation did create such a node. Do the
same when using the nvmem implementation to allow reading the MAC
address.
Fixes commit
d284e6ef0f06 ("treewide: convert mtd-mac-address-increment*
to generic implementation")
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Wed, 21 Jul 2021 15:18:58 +0000 (16:18 +0100)]
mediatek: mt7623: yet another legacy image variable restored
Restore BOOTFS_BLOCKS variable until U7623 gets brushed, so things
hopefully build now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 21 Jul 2021 14:32:00 +0000 (15:32 +0100)]
mediatek: mt7623: allow build without ext4 rootfs
The image generation code for the U7623 board expects ext4 filesystem
to be selected in menuconfig and CONFIG_TARGET_ROOTFS_PARTSIZE to be
defined. Now that ext4 isn't enabled any more, the variable was missing
and broke the build.
Set the default (104) instead of using the config variable to fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Wed, 21 Jul 2021 08:28:50 +0000 (10:28 +0200)]
ramips: fix missing NVMEM subsystem
MAC address retrieval was switched to more generic upstream (5.13) NVMEM
based solution in commit
06bb4a5018cd ("ramips: convert mtd-mac-address
to nvmem implementation") , but NVMEM subsystem wasn't enabled in the
kernel, so fix it now.
References: https://github.com/openwrt/openwrt/pull/4041#issuecomment-
883322801
Fixes: 06bb4a5018cd ("ramips: convert mtd-mac-address to nvmem implementation")
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [commit message]
Petr Štetiar [Wed, 21 Jul 2021 08:28:50 +0000 (10:28 +0200)]
bmips: fix missing NVMEM subsystem
MAC address retrieval was switched to more generic upstream (5.13) NVMEM
based solution in commit
32adbfc789f6 ("bmips: convert mtd-mac-address
to nvmem implementation"), but NVMEM subsystem wasn't enabled in the
kernel, so fix it now.
References: https://github.com/openwrt/openwrt/pull/4041#issuecomment-
883322801
Fixes: 32adbfc789f6 ("bmips: convert mtd-mac-address to nvmem implementation")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Daniel Golle [Wed, 21 Jul 2021 09:26:44 +0000 (10:26 +0100)]
mediatek: mt7623: add back needed build steps for U7623 board
When reworking the BPi-R2 the mtk-mmc-img build step was removed
despite it was still needed to build the image for the UniElec U7623
board. Add it back for now until U7623 gets its facelift.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 20 Jul 2021 17:43:56 +0000 (18:43 +0100)]
mediatek: remove ext4 images from mt7623 build
A full read-write rootfs cannot work inside uImage.FIT as the hash
will obviously change once writing to it. Disable generating ext4
rootfs images.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Tue, 20 Jul 2021 15:24:50 +0000 (16:24 +0100)]
linux/rockchip: update the USB 3.0 controller node patch
This has been added in Linux 5.10.51 [1], but it's broken/incomplete. Update our
patch and refresh the remaining patches.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.51&id=
421aff50af5e4cdc56b3ac8d6b670e09697bc8ac
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Golle [Tue, 20 Jul 2021 16:02:49 +0000 (17:02 +0100)]
mediatek: fix typo in kernel mt7623/config-5.10
Fix typo reported by github user @mans0n.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 20 Jul 2021 16:00:11 +0000 (17:00 +0100)]
mediatek: drop kmod-mmc
Support for MMC is built-into the kernel anyway, no need to select the
(empty/stub) kmod package.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 20 Jul 2021 15:58:50 +0000 (16:58 +0100)]
uboot-mediatek: fix board name of Bananapi BPi-R2
As the board name was changed to be identical to the device tree
compatible string (just like for other boards), also reflect that
change for U-Boot.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 10 Jul 2021 15:35:47 +0000 (16:35 +0100)]
mediatek: rework Bananapi BPi-R2
* introduce recovery (=initramfs) vs. production dual boot scheme
* make use of uImage.FIT (instead of FAT partition)
* generate images using build steps (instead of external scripts)
* simplify sysupgrade and config restore (thanks to uImage.FIT)
* make sure mmc devices are ordered persistently (set DT aliases)
This commit breaks sysupgrade from existing installations, you will
have to re-install using the sdcard.img.gz image.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 12 Jul 2021 15:49:12 +0000 (16:49 +0100)]
uboot-envtools: add configuration for Bananapi BPi-R2
Add fw_env configuration for the BPi-R2 which is a mediatek/mt7623
devboard which can be booted from SD Card or eMMC.
Auto detect the boot device and add environment accordingly.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 12 Jul 2021 15:47:11 +0000 (16:47 +0100)]
uboot-envtools: move mediatek to mediatek_mt7622
All mediatek boards having fw_env accessible through uboot-envtools
belong to be mt7622 subtarget. Move the file, as subtarget-specific
files are supported for a while now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 12 Jul 2021 15:52:21 +0000 (16:52 +0100)]
uboot-mediatek: rework support for the BPi-R2
* use built-in default environment instead of file in bootfs
* get rid of bootfs alltogether and use uImage.FIT
* auto-detect boot device like original script did
* add support for factory button
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 12 Jul 2021 15:54:45 +0000 (16:54 +0100)]
kernel: make uImage.FIT partition parser work on MBR partitions
Introduce new partition type 0x2e representing uImage.FIT and trigger
FIT partition parser on partitions having that type.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 12 Jul 2021 17:15:19 +0000 (18:15 +0100)]
mediatek: mt7623: import patch to fix flow offloading
Hardware flow offloading was reported to work when setting the right
version identifier. Import a patch from Frank Wunderlich doing that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 12 Jul 2021 17:13:37 +0000 (18:13 +0100)]
mediatek: mt7623: build with Linux 5.10
Update Kernel config and set Linux 5.10 for mediatek/mt7623.
(patches have already been updated to 5.10 when mt7622 was bumped)
Tested on Bananapi BPi-R2.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Mon, 19 Jul 2021 08:59:05 +0000 (09:59 +0100)]
kernel: bump 5.10 to 5.10.51
No deleted or manually refreshed patches.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Golle [Wed, 30 Jun 2021 01:18:42 +0000 (02:18 +0100)]
x86: include kmod-fs-vfat by default in generic images
As x86/64 and x86/generic may be using UEFI, mounting the FAT-32 /boot
is necessary in order not to loose configuration files accross
sysupgrades. Include kmod-fs-vfat by default to make sure /boot can
always be mounted.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ansuel Smith [Mon, 19 Jul 2021 15:58:00 +0000 (17:58 +0200)]
ath10k: fix compilation error with CONFIG_OF not available
of_platform_device_create require CONFIG_OF selected.
Add an ifdef and register to the of platform only if of is available.
Fixes: 985954ccbd11 ("kernel: add ath10k support for of_get_mac_address")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sun, 18 Jul 2021 17:37:39 +0000 (19:37 +0200)]
bmips: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:53:52 +0000 (23:53 +0200)]
ipq40xx: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:53:02 +0000 (23:53 +0200)]
mediatek: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:52:21 +0000 (23:52 +0200)]
mpc85xx: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:51:11 +0000 (23:51 +0200)]
octeon: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:50:02 +0000 (23:50 +0200)]
ramips: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:47:31 +0000 (23:47 +0200)]
ath79: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:45:20 +0000 (23:45 +0200)]
mvebu: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:40:10 +0000 (23:40 +0200)]
lantiq: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 21:38:11 +0000 (23:38 +0200)]
ipq806x: convert mtd-mac-address to nvmem implementation
Define nvmem-cells and convert mtd-mac-address to nvmem implementation.
The conversion is done with an automated script.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Mon, 12 Jul 2021 19:42:41 +0000 (21:42 +0200)]
treewide: convert mtd-mac-address-increment* to generic implementation
Rework patch 681-NET-add-mtd-mac-address-support to implement
only the function to read the mac-address from mtd.
Generalize mtd-mac-address-increment function so it can be applied
to any source of of_get_mac_address.
Rename any mtd-mac-address-increment to mac-address-increment.
Rename any mtd-mac-address-increment-byte to mac-address-increment-byte.
This should make simplify the conversion of target to nvmem implementation.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 2 Apr 2021 22:31:08 +0000 (00:31 +0200)]
kernel: add ath10k support for of_get_mac_address
ath10k doesn't currently support the standard function to get mac-address from the dts.
Add this for both ath10k and ath10k-ct
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Nick Hainke [Sun, 18 Jul 2021 13:32:44 +0000 (15:32 +0200)]
dnsmasq: add /tmp/hosts/ to jail_mount
Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/".
If you don't add this to the jail_mount, dnsmasq can't read it anymore.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Yonghyu Ban [Tue, 6 Jul 2021 07:13:59 +0000 (16:13 +0900)]
scripts/mkits.sh: Fix the hash algorithm paramter
The mkits.sh script help message states hash algorithm can be
specified using the -H command-line option, but it does not work
currently due to a bug in the script.
This patch fixes this problem by changing the option from -S to
-H and specify getopts parameter after it
Signed-off-by: Yonghyu Ban <yonghyu@empo.im>
Daniel Golle [Sun, 18 Jul 2021 18:09:50 +0000 (19:09 +0100)]
procd: update to git HEAD
9bd1b7f jail: refactor directory handling for rootfs and overlaydir
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hans Dedecker [Sun, 18 Jul 2021 17:27:57 +0000 (19:27 +0200)]
odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)
bc9d317 dhcpv6-ia: fix invalid preferred lifetime
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Edgar Su [Mon, 12 Jul 2021 13:22:48 +0000 (21:22 +0800)]
x86: kernel: set NR_CPUS to 512
NR_CPUS limits the number of CPUs supported to 8. This makes total sense
on hardware-restircted platforms, but not on x86_64, where CPUs with
more than 8 cores can be easily acquired and with less physical limitaions.
see also: https://forum.openwrt.org/t/x86-64-8-cpu-limitation-on-vanilla-release/100946
Signed-off-by: Edgar Su <sjs333@outlook.com>
projects / openwrt / staging / pepe2k.git / log