Staging: IIO: Trigger support added to core.

Add general registration support for IIO triggers.  These
are currently only used to initialize a 'poll' of a given
device.  Examples include the lis3l02dq's data ready signal
being used to initialize a read and gpio triggers being
used to allow externally synchronized sensor reading.

Each trigger can cause any number of 'consumer' devices
to be polled with each storing data into a related ring
buffer.

Two stage triggering is supported with 'fast' and 'slow'
paths.  The first is used for things like pulling a data
hold line high and the second for actual read which
may take far longer.

Changes since V2:
* As with IIO triggers now use a registration approach
  much closer to that of input leading to cleaner code.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: VTI sca3000 series accelerometer driver (spi)

Example of how a device with a hardware ring buffer is
handled within IIO.

Changes since V2:
* Moved to new registration functions giving much cleaner
  interface.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: Add generic ring buffer support to the IIO core

This provides a unified interface for hardware and software
ring buffers.

Changes since V2:
* Moved to a more consistent structure.  Now the ring buffer
  has an associated struct device which is a child of the
  relevant iio_dev.  This in turn has two children, one
  for the event interface and one for the access interface.
  These two interfaces are now managed via cdev structures.

* Numerous minor cleanups

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: kxsd9 accelerometer minimal support

This provides only very minimal support for this device.
Note that an alternate driver has been posted to the input
mailing list.

When the original LMKL discussion that led to the descision
to develop IIO occured, the question on whether the differing
requirements of IIO and input drivers made it a good idea
to have unified drivers was left as an open question.
It still is.  All opinions on this question welcome.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: lis3l02dq accelerometer core support

A later patch in the series will add data ready triggering
and ring buffer support.

This core patch provides an event interface and sysfs
based reading of values.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: tsl2561 digital light sensor core support

This is a pretty minimalist example of an IIO driver.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: max1363 ADC driver

Core support for MAX1361, MAX1362, MAX1363, MAX1364,
MAX1136, MAX1137, MAX1138, MAX1139, MAX1236, MAX1237,
MAX1238, MAX1239.

Ring buffer support later in series.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: IIO: core support for device registration and management

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Make some structures static

This was done using a semantic patch (http://coccinelle.lip6.fr/) that
checks that the declaration is not inside a function definition, that the
defined variable is not exported using EXPORTED_SYMBOL, etc, and that the
defined variable does not occur in any other file.  If these conditions
hold, static is added before the declaration.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt{2860,2870,3070}sta: Remove unused CRC code

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: Fix test in rt_ioctl_siwfrag()

The test always evaluated to true.

MIN_FRAG_THRESHOLD is defined 256,
MAX_FRAG_THRESHOLD is defined 2346

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: remove no longer needed rt3070 driver

rt2870 handles now all rt2870/rt3070 chipsets.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove old firmware

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxx70: merge rt3070 with rt2870

* remove RT30xx ifdefs
* add -DRT3070 to rt2870's EXTRA_CFLAGS
* because of changes in the way that hardware is initialized/accessed
  rt3070 driver's firmware should be now also used by rt2870 driver
  (this is also done by newer out-of-tree vendor driver versions, i.e.
  2.1.0.0, historically in-kernel driver was based on 1.4.0.0 version)
* change RT28xx_CHIP_NAME to RTxx70
* update rt2870's help entry text
* add MODULE_ALIAS("rt3070sta") to rt2870
* update rt3070's dependencies

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: add Antenna Diversity support

rt3070:
* remove non-working AntDiversity config parameter
* remove unused bRxAntDiversity field from COMMON_CONFIG

rt2870:
* propagate Antenna Diversity support from rt3070

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: add eFuse support

rt3070:
* remove unused bEEPROMFile field from RTMP_ADAPTER

rt2870:
* propagate eFuse support from rt3070

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxxx: remove unused AsicAntenna{Select,Setting}()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: remove SHOW_ADHOC_ENTRY_INFO support

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove unused RT_CMD_SET_* internal commands

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove unused MiniportDataMMRequest()

Then remove no longer needed MlmeDataHardTransmit().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: LinkUp() fixes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: rt_ioctl_siwencode() fixes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: MlmeAssocReqAction() fixes for wpa_supplicant support

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: MlmeCheckPsmChange() fix

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: MlmeSelectTxRateTable() fix

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: BssTableSetEntry() fix

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: AsicSwitchChannel() fix

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0 fix BACapability policy handling

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix fOP_STATUS_DOZE flag handling

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix BPP_R66 register handling

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: fix GTK length check in ParseKeyData()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt28x0: add SIOCGIWNAME support to rt_ioctl_giwscan()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: add fRTUSB_BULK_OUT_DATA_NORMAL_5 quirk

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: use internal command for AsicUpdateProtect()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: add remaining rt2870 device ids

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: remove needless EFUSE_TAG register read

* remove write-only EFuseTag field from RTMP_ADAPTER
* remove needless EFUSE_TAG register read

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: AsicSetSlotTime() fix

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: WEP fixes

Propagate WEP fixes from rt28[67]0 to rt3070.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: fix PID checking in RTUSBEnqueueCmdFromNdis()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: update allowed channels list for Japan

rt3070 driver allows use of 5G channel 34 while rt{286,287,309}0
drivers don't and quick googling seems to confirm the limitation.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxxx: RTMPGetRalinkAuthModeStr() fixes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxx70: unify NICInitRT30xxRFRegisters()

Unify RT30xx and !RT30xx code in NICInitRT30xxRFRegisters().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxxx: unify AsicSwitchChannel()

Unify RT30xx and !RT30xx code in AsicSwitchChannel().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxxx: unify AsicRxAntEvalTimeout()

Unify RT30xx and !RT30xx code in AsicRxAntEvalTimeout().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove unused code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove private ioctls

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove private debugging ioctls

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove superfluous function prototypes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove unused link_list.h

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: debug messages fixes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove dead virtual adapter support

* remove dead virtual adapter support
* remove needless rt28xx_ioctl() wrapper
* remove superfluous NULL checks

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove dead DBG_DIAGNOSE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: unify AsicEvaluateRxAnt()

Unify RT30xx and !RT30xx code in AsicEvaluateRxAnt().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: unify MlmeCheckPsmChange()

Unify RT30xx and !RT30xx code in MlmeCheckPsmChange().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: unify RT{USB,MP}FilterCalibration()

RTMP_BBP_IO_{READ,WRITE}8_BY_REG_ID equals RTUSB{Read,Write}BBPRegister
in case of USB chipsets so unify RT30xx and !RT30xx code.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove superfluous RT30xx ifdefs

* add !RT30xx version of IS_RT3090() macro
* remove superfluous RT30xx ifdefs
* unify RT30xx and !RT30xx code where possible
* kill RT28XX_UPDATE_PROTECT() macro
* remove needless variable initializations
* kill some needless function prototypes

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: unify different RT30xx{Read,Write}RFRegister() flavors

RTMP_IO_{READ,WRITE}32 equals RTUSB{Read,Write}MACRegister
in case of USB chipsets so unify RT30xx and !RT30xx code.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove unused defines

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: kill PID macros

* kill PID macros
* unify now identical RT30xx and !RT30xx code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: kill TimerQThr thread first in RT28xxThreadTerminate()

* kill TimerQThr thread first in RT28xxThreadTerminate()
* remove the debugging printk() while at it

This makes rt3070 driver match rt2870 driver's behavior.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: PID checking fixes

* rt3070:
  - add missing pid_nr() invocations

* rt{28,30}70:
  - do not treat PID 0 as valid

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: kill RT8270_USB_DEVICES() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove dead platform specific code

Remove dead support for:

* IKANOS_VX_1X0
* INF_TWINPASS
* INF_DANUBE
* BRCM_6358

platforms.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtxxx0: remove support for older wireless extensions

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt3070: fix build warnings

In file included from drivers/staging/rt3070/common/../../rt2870/common/cmm_data.c:2,
                 from drivers/staging/rt3070/common/cmm_data.c:2:
drivers/staging/rt3070/common/../../rt2870/common/../../rt2860/common/cmm_data.c: In function ‘RTMP_FillTxBlkInfo’:
drivers/staging/rt3070/common/../../rt2870/common/../../rt2860/common/cmm_data.c:1018: warning: label ‘FillTxBlkErr’ defined but not used

In file included from drivers/staging/rt3070/common/../../rt2870/common/eeprom.c:2,
                 from drivers/staging/rt3070/common/eeprom.c:2:
drivers/staging/rt3070/common/../../rt2870/common/../../rt2860/common/eeprom.c: In function ‘set_eFuseLoadFromBin_Proc’:
drivers/staging/rt3070/common/../../rt2870/common/../../rt2860/common/eeprom.c:1041: warning: unused variable â\80\98orgfsgidâ\80\99
drivers/staging/rt3070/common/../../rt2870/common/../../rt2860/common/eeprom.c:1041: warning: unused variable ‘orgfsuid’

In file included from drivers/staging/rt3070/../rt2870/rt_profile.c:2,
                 from drivers/staging/rt3070/rt_profile.c:2:
drivers/staging/rt3070/../rt2870/../rt2860/rt_profile.c: In function ‘RTMPReadParametersHook’:
drivers/staging/rt3070/../rt2870/../rt2860/rt_profile.c:863: warning: unused variable â\80\98orgfsgidâ\80\99
drivers/staging/rt3070/../rt2870/../rt2860/rt_profile.c:863: warning: unused variable â\80\98orgfsuidâ\80\99

In file included from drivers/staging/rt3070/common/rtusb_io.c:2:
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c: In function ‘CMDHandler’:
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c:1763: warning: ‘CipherAlg’ may be used uninitialized in this function
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c:1758: note: ‘CipherAlg’ was declared here
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c:1763: warning: ‘KeyIdx’ may be used uninitialized in this function
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c:1757: note: ‘KeyIdx’ was declared here
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c:1763: warning: ‘ApIdx’ may be used uninitialized in this function
drivers/staging/rt3070/common/../../rt2870/common/rtusb_io.c:1759: note: ‘ApIdx’ was declared here

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: duplicated code is executed twice in AsicEvaluateRxAnt()

Fix it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove some write-only struct members

There's no point in keeping around struct members that are only written
to but never read.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Convert typedef MTO_PARAMETERS to struct wb35_mto_param

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused struct _STATISTICS_INFO

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Convert typedef DESCRIPTOR to struct wb35_descriptor

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Cleanup the mlmetxrx_f.h header file

This patch removes the unused MLMEProcThread and MLMEReturnPacket
declarations and indents the header file.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Remove unused struct _RXBUFFER

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: Convert MDS typedef to struct w35_mds

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: includecheck fix: rt_linux.h

fix the following 'make includecheck' warning:

  drivers/staging/rt2860/rt_linux.h: linux/wireless.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8187se: Fix comment-out-typo

This fixes a comment-out-typo that resulted in a dangling if-branch.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2870: new USB ID for Belkin N+ F5D8055

New USB ID for Belkin N+ F5D8055 (USB 802.11n adapter).

I've made this patch with drivers/staging branch found here:
http://git.kernel.org/?p=linux/kernel/git/gregkh/staging-2.6.git

Signed-off-by: Daniele Napolitano <dnax88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: add linux/vmalloc.h

Some arches don't provide vmalloc.h through the includes already included
in rtl8192su. This patch adds it.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: stop using skb->tail

This patch replaces uses of skb->tail with skb_tail_pointer(skb).

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: fixup size comparison warning

sizeof(val) returns type unsigned long. count is already unsigned long, so
just use that. This fixes a compile warning.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: fix up printk warnings

This patch addresses printk warnings.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rtl8192su: compile fixes

This patch removes -fhard-float and the software float helpers. In-kernel
 floating point is not allowed.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: coding style cleanups

Some remaining coding style cleanups to the header files
and the echo.c file.

Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: remove unneeded USE_SSE2 defines

This define is never set in the kernel, so remove the code
using it.

Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: remove unneeded USE_MMX defines

This define is never set in the kernel, so remove the code
using it.  This lets us drop the mmx.h file as well.

Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: remove bit_operations.h

This file is no longer needed, thanks to the work done by David.

Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: top bit patch

This patch removes the need for the bit_operations.h include file which
can now be deleted.  It also contains some minor corrections to comments
(typos and alignment of ASCII formulas).  I have also removed some #if
lines that were not necessary.

I have tested the patch using a unit test module that runs in kernel
mode and have verified that the patched code gives identical results to
the previous version using a 8000 sample input sequence.  Let me know if
you want this unit test, it runs automatically when the module is
insmod-ed and outputs a go/no go result:

# insmod oslec.ko
# dmesg
[17191803.480000] oslec_test installed
[17191803.480000] Testing OSLEC with 128 taps (16 ms tail)
[17191803.496000] Oslec Unit Test PASSED! pass: 8000  fail: 0

Signed-off-by: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: remove TODO item

The proc interface is no longer in the echo code, so remove the TODO
item.

Cc: Steve Underwood <steveu@coppice.org>
Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: fix up remaining checkpatch.pl issues

It's all just minor comment spacing issues.  This patch fixes
up the remaining ones and now the code is checkpatch.pl clean.

Cc: Steve Underwood <steveu@coppice.org>
Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: SEP driver build breaks with CONFIG_PCI=n

next-20090813 randconfig build breaks Discretix SEP driver when
configured with CONFIG_PCI=n.

drivers/staging/sep/sep_driver.c: In function 'sep_probe':
drivers/staging/sep/sep_driver.c:2548: error: implicit declaration of function 'pci_dev_get'

This patch adds the dependency on PCI for the DX SEP driver.

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: use ioremap helpers

Whee lots of code vanishes. While we are it note various existing stuff
that couldn't work but was ifdeffed in this area.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: untangle the register_fs code

While goto can be useful for cleaner cleaning up in C (as Linux sometimes
does and I think Linus borrowed stylistically from Amiga) you can overdo it.
Here is a fine fine example of when it's overkill

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: clean up time

The SEP time setting stuff can now get a hoover

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: clean up command sending

Split out the debug dumping functionality. Clean up the rest. For the moment
leave the hideous cache flush in there as the code needs fixing to use
the dma_map_sg interfaces not its own crazed table functions

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: flow ioctl cleanup

Simple ioctl taking a single numeric argument so ditch the structs and
weirdness. While we are it lock it properly and fix the error returns.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: kick out various fields we can prove are not needed

#1: sep->cache_addr is assigned to sep->rar_addr and never changed
    sep->rar_addr is never assigned after this point

#2: sep->cache_bus ditto for sep->rar_bus

#3  sep->rar_region_addr is assigned but necer used

#4  sep->io_addr is in fact private to the probe function and
    the same as the reg_addr

#5  The remainig sep->io fields are in fact function locals

#6  sep->message_shared_area is assigned once from sep->shared_area
    sep->shared_area does not then change

#7  sep->shared_addr and sep->shared_area_addr are the same thing, ditto
    for the bus addresses.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Implement some proper open/close methods

Use the mutex as a protection for open close rather than leaving it hanging
invalidly across userspace.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: tidy firmware load

Start by removing unused fields and then work this back to eliminate unused
chunks of the firmware loading ioctl (ie almost all of it)

Also fix the wrong handling of shared allocations and allocate the rar
region properly with dma_alloc_coherent not kmalloc, as it is device shared.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: various minor tidyups

Do these in one batch rather than generate lots of tiny diffs

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: fix a conversion thinko

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sep: Use the proper allocators for the shared area

The DMA handling in the driver is a bit of a catastrophe. Start with the
simple things - allocate the shared area properly.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>