git.openwrt.org Git - openwrt/staging/blogic.git/log

net: sun: cassini: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: smsc: smc91x: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: smsc: smc911x: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2017-03-06

1) Fix lockdep splat on xfrm policy subsystem initialization.
   From Florian Westphal.

2) When using socket policies on IPv4-mapped IPv6 addresses,
   we access the flow informations of the wrong address family
   what leads to an out of bounds access. Fix this by using
   the family we get with the dst_entry, like we do it for the
   standard policy lookup.

3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by
   adding a check for that before sending a ICMPV6_PKT_TOOBIG
   message.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: reorder icmpv6_init() and ip6_mr_init()

Andrey reported the following kernel crash:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 14446 Comm: syz-executor6 Not tainted 4.10.0+ #82
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88001f311700 task.stack: ffff88001f6e8000
RIP: 0010:ip6mr_sk_done+0x15a/0x3d0 net/ipv6/ip6mr.c:1618
RSP: 0018:ffff88001f6ef418 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 1ffff10003edde8c RCX: ffffc900043ee000
RDX: 0000000000000004 RSI: ffffffff83e3b3f8 RDI: 0000000000000020
RBP: ffff88001f6ef508 R08: fffffbfff0dcc5d8 R09: 0000000000000000
R10: ffffffff86e62ec0 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88001f6ef4e0 R15: ffff8800380a0040
FS:  00007f7a52cec700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000061c500 CR3: 000000001f1ae000 CR4: 00000000000006f0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Call Trace:
rawv6_close+0x4c/0x80 net/ipv6/raw.c:1217
inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425
inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432
sock_release+0x8d/0x1e0 net/socket.c:597
__sock_create+0x39d/0x880 net/socket.c:1226
sock_create_kern+0x3f/0x50 net/socket.c:1243
inet_ctl_sock_create+0xbb/0x280 net/ipv4/af_inet.c:1526
icmpv6_sk_init+0x163/0x500 net/ipv6/icmp.c:954
ops_init+0x10a/0x550 net/core/net_namespace.c:115
setup_net+0x261/0x660 net/core/net_namespace.c:291
copy_net_ns+0x27e/0x540 net/core/net_namespace.c:396
9pnet_virtio: no channels available for device ./file1
create_new_namespaces+0x437/0x9b0 kernel/nsproxy.c:106
unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
SYSC_unshare kernel/fork.c:2281 [inline]
SyS_unshare+0x64e/0x1000 kernel/fork.c:2231
entry_SYSCALL_64_fastpath+0x1f/0xc2

This is because net->ipv6.mr6_tables is not initialized at that point,
ip6mr_rules_init() is not called yet, therefore on the error path when
we iterator the list, we trigger this oops. Fix this by reordering
ip6mr_rules_init() before icmpv6_sk_init().

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: fix use-after-free in dccp_feat_activate_values

Dmitry reported crashes in DCCP stack [1]

Problem here is that when I got rid of listener spinlock, I missed the
fact that DCCP stores a complex state in struct dccp_request_sock,
while TCP does not.

Since multiple cpus could access it at the same time, we need to add
protection.

[1]
BUG: KASAN: use-after-free in dccp_feat_activate_values+0x967/0xab0
net/dccp/feat.c:1541 at addr ffff88003713be68
Read of size 8 by task syz-executor2/8457
CPU: 2 PID: 8457 Comm: syz-executor2 Not tainted 4.10.0-rc7+ #127
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0x292/0x398 lib/dump_stack.c:51
kasan_object_err+0x1c/0x70 mm/kasan/report.c:162
print_address_description mm/kasan/report.c:200 [inline]
kasan_report_error mm/kasan/report.c:289 [inline]
kasan_report.part.1+0x20e/0x4e0 mm/kasan/report.c:311
kasan_report mm/kasan/report.c:332 [inline]
__asan_report_load8_noabort+0x29/0x30 mm/kasan/report.c:332
dccp_feat_activate_values+0x967/0xab0 net/dccp/feat.c:1541
dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
NF_HOOK include/linux/netfilter.h:257 [inline]
ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
dst_input include/net/dst.h:507 [inline]
ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:257 [inline]
ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
__netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
process_backlog+0xe5/0x6c0 net/core/dev.c:4839
napi_poll net/core/dev.c:5202 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5267
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:902
</IRQ>
do_softirq.part.17+0x1e8/0x230 kernel/softirq.c:328
do_softirq kernel/softirq.c:176 [inline]
__local_bh_enable_ip+0x1f2/0x200 kernel/softirq.c:181
local_bh_enable include/linux/bottom_half.h:31 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:971 [inline]
ip6_finish_output2+0xbb0/0x23d0 net/ipv6/ip6_output.c:123
ip6_finish_output+0x302/0x960 net/ipv6/ip6_output.c:148
NF_HOOK_COND include/linux/netfilter.h:246 [inline]
ip6_output+0x1cb/0x8d0 net/ipv6/ip6_output.c:162
ip6_xmit+0xcdf/0x20d0 include/net/dst.h:501
inet6_csk_xmit+0x320/0x5f0 net/ipv6/inet6_connection_sock.c:179
dccp_transmit_skb+0xb09/0x1120 net/dccp/output.c:141
dccp_xmit_packet+0x215/0x760 net/dccp/output.c:280
dccp_write_xmit+0x168/0x1d0 net/dccp/output.c:362
dccp_sendmsg+0x79c/0xb10 net/dccp/proto.c:796
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:744
sock_sendmsg_nosec net/socket.c:635 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:645
SYSC_sendto+0x660/0x810 net/socket.c:1687
SyS_sendto+0x40/0x50 net/socket.c:1655
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: 0033:0x4458b9
RSP: 002b:00007f8ceb77bb58 EFLAGS: 00000282 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000017 RCX: 00000000004458b9
RDX: 0000000000000023 RSI: 0000000020e60000 RDI: 0000000000000017
RBP: 00000000006e1b90 R08: 00000000200f9fe1 R09: 0000000000000020
R10: 0000000000008010 R11: 0000000000000282 R12: 00000000007080a8
R13: 0000000000000000 R14: 00007f8ceb77c9c0 R15: 00007f8ceb77c700
Object at ffff88003713be50, in cache kmalloc-64 size: 64
Allocated:
PID = 8446
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:605
kmem_cache_alloc_trace+0x82/0x270 mm/slub.c:2738
kmalloc include/linux/slab.h:490 [inline]
dccp_feat_entry_new+0x214/0x410 net/dccp/feat.c:467
dccp_feat_push_change+0x38/0x220 net/dccp/feat.c:487
__feat_register_sp+0x223/0x2f0 net/dccp/feat.c:741
dccp_feat_propagate_ccid+0x22b/0x2b0 net/dccp/feat.c:949
dccp_feat_server_ccid_dependencies+0x1b3/0x250 net/dccp/feat.c:1012
dccp_make_response+0x1f1/0xc90 net/dccp/output.c:423
dccp_v6_send_response+0x4ec/0xc20 net/dccp/ipv6.c:217
dccp_v6_conn_request+0xaba/0x11b0 net/dccp/ipv6.c:377
dccp_rcv_state_process+0x51e/0x1650 net/dccp/input.c:606
dccp_v6_do_rcv+0x213/0x350 net/dccp/ipv6.c:632
sk_backlog_rcv include/net/sock.h:893 [inline]
__sk_receive_skb+0x36f/0xcc0 net/core/sock.c:479
dccp_v6_rcv+0xba5/0x1d00 net/dccp/ipv6.c:742
ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
NF_HOOK include/linux/netfilter.h:257 [inline]
ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
dst_input include/net/dst.h:507 [inline]
ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:257 [inline]
ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
__netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
process_backlog+0xe5/0x6c0 net/core/dev.c:4839
napi_poll net/core/dev.c:5202 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5267
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Freed:
PID = 15
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:57
save_stack+0x43/0xd0 mm/kasan/kasan.c:502
set_track mm/kasan/kasan.c:514 [inline]
kasan_slab_free+0x73/0xc0 mm/kasan/kasan.c:578
slab_free_hook mm/slub.c:1355 [inline]
slab_free_freelist_hook mm/slub.c:1377 [inline]
slab_free mm/slub.c:2954 [inline]
kfree+0xe8/0x2b0 mm/slub.c:3874
dccp_feat_entry_destructor.part.4+0x48/0x60 net/dccp/feat.c:418
dccp_feat_entry_destructor net/dccp/feat.c:416 [inline]
dccp_feat_list_pop net/dccp/feat.c:541 [inline]
dccp_feat_activate_values+0x57f/0xab0 net/dccp/feat.c:1543
dccp_create_openreq_child+0x464/0x610 net/dccp/minisocks.c:121
dccp_v6_request_recv_sock+0x1f6/0x1960 net/dccp/ipv6.c:457
dccp_check_req+0x335/0x5a0 net/dccp/minisocks.c:186
dccp_v6_rcv+0x69e/0x1d00 net/dccp/ipv6.c:711
ip6_input_finish+0x46d/0x17a0 net/ipv6/ip6_input.c:279
NF_HOOK include/linux/netfilter.h:257 [inline]
ip6_input+0xdb/0x590 net/ipv6/ip6_input.c:322
dst_input include/net/dst.h:507 [inline]
ip6_rcv_finish+0x289/0x890 net/ipv6/ip6_input.c:69
NF_HOOK include/linux/netfilter.h:257 [inline]
ipv6_rcv+0x12ec/0x23d0 net/ipv6/ip6_input.c:203
__netif_receive_skb_core+0x1ae5/0x3400 net/core/dev.c:4190
__netif_receive_skb+0x2a/0x170 net/core/dev.c:4228
process_backlog+0xe5/0x6c0 net/core/dev.c:4839
napi_poll net/core/dev.c:5202 [inline]
net_rx_action+0xe70/0x1900 net/core/dev.c:5267
__do_softirq+0x2fb/0xb7d kernel/softirq.c:284
Memory state around the buggy address:
ffff88003713bd00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88003713bd80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88003713be00: fc fc fc fc fc fc fc fc fc fc fb fb fb fb fb fb
^

Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Allocate number of rx/tx buffers agreed on by firmware

The amount of TX/RX buffers that the vNIC driver currently allocates
is different from the amount agreed upon in negotiation with firmware.
Correct that by allocating the requested number of buffers confirmed
by firmware.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix overflowing firmware/hardware TX queue

Use a counter to track the number of outstanding transmissions sent
that have not received completions. If the counter reaches the maximum
number of queue entries, stop transmissions on that queue. As we receive
more completions from firmware, wake the queue once the counter reaches
an acceptable level.

This patch prevents hardware/firmware TX queue from filling up and
and generating errors. Since incorporating this fix, internal testing
has reported that these firmware errors have stopped.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_skbmod: remove unneeded rcu_read_unlock in tcf_skbmod_dump

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'rds-fixes'

Sowmini Varadhan says:

====================
rds: tcp: fix various rds-tcp issues during netns create/delete sequences

Dmitry Vyukov reported some syszkaller panics during netns deletion.

While I have not been able to reproduce those exact panics, my attempts
to do so uncovered a few other problems, which are fixed patch 2 and
patch 3 of this patch series. In addition, as mentioned in,
https://www.spinics.net/lists/netdev/msg422997.html
code-inspection points that the rds_connection needs to take an explicit
refcnt on the struct net so that it is held down until all cleanup is
completed for netns removal, and this is fixed by patch1.

The following scripts were run concurrently to uncover/test patch{2, 3}
while simultaneously running rds-ping to 12.0.0.18 from another system:

  # cat del.rds
  while [ 1 ]; do
          modprobe rds_tcp
          modprobe -r rds-tcp
  done

  # cat del.netns
  while [ 1 ]; do
          ip netns delete blue
          ip netns add blue
          ip link add link eth1 address a:b:c:d:e:f blue0 type macvlan
          ip link set blue0 netns blue
          ip netns exec blue ip addr add 12.0.0.18/24 dev blue0
          ip netns exec blue ifconfig blue0 up
          sleep 3;
  done
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rds: tcp: Sequence teardown of listen and acceptor sockets to avoid races

Commit a93d01f5777e ("RDS: TCP: avoid bad page reference in
rds_tcp_listen_data_ready") added the function
rds_tcp_listen_sock_def_readable()  to handle the case when a
partially set-up acceptor socket drops into rds_tcp_listen_data_ready().
However, if the listen socket (rtn->rds_tcp_listen_sock) is itself going
through a tear-down via rds_tcp_listen_stop(), the (*ready)() will be
null and we would hit a panic  of the form
  BUG: unable to handle kernel NULL pointer dereference at   (null)
  IP:           (null)
   :
  ? rds_tcp_listen_data_ready+0x59/0xb0 [rds_tcp]
  tcp_data_queue+0x39d/0x5b0
  tcp_rcv_established+0x2e5/0x660
  tcp_v4_do_rcv+0x122/0x220
  tcp_v4_rcv+0x8b7/0x980
    :
In the above case, it is not fatal to encounter a NULL value for
ready- we should just drop the packet and let the flush of the
acceptor thread finish gracefully.

In general, the tear-down sequence for listen() and accept() socket
that is ensured by this commit is:
     rtn->rds_tcp_listen_sock = NULL; /* prevent any new accepts */
     In rds_tcp_listen_stop():
         serialize with, and prevent, further callbacks using lock_sock()
         flush rds_wq
         flush acceptor workq
         sock_release(listen socket)

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rds: tcp: Reorder initialization sequence in rds_tcp_init to avoid races

Order of initialization in rds_tcp_init needs to be done so
that resources are set up and destroyed in the correct synchronization
sequence with both the data path, as well as netns create/destroy
path. Specifically,

- we must call register_pernet_subsys and get the rds_tcp_netid
  before calling register_netdevice_notifier, otherwise we risk
  the sequence
    1. register_netdevice_notifier sets up netdev notifier callback
    2. rds_tcp_dev_event -> rds_tcp_kill_sock uses netid 0, and finds
       the wrong rtn, resulting in a panic with string that is of the form:

  BUG: unable to handle kernel NULL pointer dereference at 000000000000000d
  IP: rds_tcp_kill_sock+0x3a/0x1d0 [rds_tcp]
         :

- the rds_tcp_incoming_slab kmem_cache must be initialized before the
  datapath starts up. The latter can happen any time after the
  pernet_subsys registration of rds_tcp_net_ops, whose -> init
  function sets up the listen socket. If the rds_tcp_incoming_slab has
  not been set up at that time, a panic of the form below may be
  encountered

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000014
  IP: kmem_cache_alloc+0x90/0x1c0
     :
  rds_tcp_data_recv+0x1e7/0x370 [rds_tcp]
  tcp_read_sock+0x96/0x1c0
  rds_tcp_recv_path+0x65/0x80 [rds_tcp]
     :

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rds: tcp: Take explicit refcounts on struct net

It is incorrect for the rds_connection to piggyback on the
sock_net() refcount for the netns because this gives rise to
a chicken-and-egg problem during rds_conn_destroy. Instead explicitly
take a ref on the net, and hold the netns down till the connection
tear-down is complete.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sock_hold-misuses'

Eric Dumazet says:

====================
net: fix possible sock_hold() misuses

skb_complete_wifi_ack() and skb_complete_tx_timestamp() currently
call sock_hold() on sockets that might have transitioned their sk_refcnt
to zero already.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix socket refcounting in skb_complete_tx_timestamp()

TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.

sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc and lead to leaks or use after free.

Fixes: 62bccb8cdb69 ("net-timestamp: Make the clone operation stand-alone from phy timestamping")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix socket refcounting in skb_complete_wifi_ack()

TX skbs do not necessarily hold a reference on skb->sk->sk_refcnt
By the time TX completion happens, sk_refcnt might be already 0.

sock_hold()/sock_put() would then corrupt critical state, like
sk_wmem_alloc.

Fixes: bf7fa551e0ce ("mac80211: Resolve sk_refcnt/sk_wmem_alloc issue in wifi ack path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Call state should be read with READ_ONCE() under some circumstances

The call state may be changed at any time by the data-ready routine in
response to received packets, so if the call state is to be read and acted
upon several times in a function, READ_ONCE() must be used unless the call
state lock is held.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix various issues for sockets morphing to listen state

Dmitry Vyukov reported a divide by 0 triggered by syzkaller, exploiting
tcp_disconnect() path that was never really considered and/or used
before syzkaller ;)

I was not able to reproduce the bug, but it seems issues here are the
three possible actions that assumed they would never trigger on a
listener.

1) tcp_write_timer_handler
2) tcp_delack_timer_handler
3) MTU reduction

Only IPv6 MTU reduction was properly testing TCP_CLOSE and TCP_LISTEN
states from tcp_v6_mtu_reduced()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnx2x-fixes'

Michal Schmidt says:

====================
bnx2x: PTP crash, VF VLAN fixes

here are fixes for a crash with PTP, a crash in setting of VF multicast
addresses, and non-working VLAN filters configuration from the VF side.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: add missing configuration of VF VLAN filters

Configuring VLANs from the VF side had no effect, because the PF ignored
filters of type VFPF_VLAN_FILTER in the VF-PF message.

Add the missing filter type to configure.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix incorrect filter count in an error message

filters->count is the number of filters we were supposed to configure.
There is no reason to increase it by +1 when printing the count in an error
message.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: do not rollback VF MAC/VLAN filters we did not configure

On failure to configure a VF MAC/VLAN filter we should not attempt to
rollback filters that we failed to configure with -EEXIST.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix detection of VLAN filtering feature for VF

VFs are currently missing the VLAN filtering feature, because we were
checking the PF's acquire response before actually performing the acquire.

Fix it by setting the feature flag later when we have the PF response.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: fix possible overrun of VFPF multicast addresses array

It is too late to check for the limit of the number of VF multicast
addresses after they have already been copied to the req->multicast[]
array, possibly overflowing it.

Do the check before copying.

Also fix the error path to not skip unlocking vf2pf_mutex.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: lower verbosity of VF stats debug messages

When BNX2X_MSG_IOV is enabled, the driver produces too many VF statistics
messages. Lower the verbosity of the VF stats messages similarly as in
commit 76ca70fabbdaa3 ("bnx2x: [Debug] change verbosity of some prints").

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: prevent crash when accessing PTP with interface down

It is possible to crash the kernel by accessing a PTP device while its
associated bnx2x interface is down. Before the interface is brought up,
the timecounter is not initialized, so accessing it results in NULL
dereference.

Fix it by checking if the interface is up.

Use -ENETDOWN as the error code when the interface is down.
-EFAULT in bnx2x_ptp_adjfreq() did not seem right.

Tested using phc_ctl get/set/adj/freq commands.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

spi_ks8995: regs_size incorrect for some devices

Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

spi_ks8995: fix "BUG: key accdaa28 not in .data!"

Signed-off-by: Maarten Blomme <Maarten.Blomme@flir.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: add IPV6 dependency

The ethernet support now calls directly into the ipv6 core code, which
fails if IPV6 is a loadable module but mlx5 is built-in:

drivers/net/ethernet/mellanox/mlx5/core/en_tc.o: In function `mlx5e_create_encap_header_ipv6':
en_tc.c:(.text.mlx5e_create_encap_header_ipv6+0x110): undefined reference to `ip6_route_output_flags'

This adds a dependency to ensure that MLX5_CORE_EN can only be built
if we are able link the kernel successfully. The downside is that the
ethernet option can be hidden. Alternatively we could make MLX5_CORE
depend on "IPV6 || !IPV6", which would force MLX5_CORE to be a module
when IPV6 is, including in configurations where we don't use the ethernet
support at all.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

dt: emac: document device-tree based phy discovery and setup

This patch adds documentation for a new "phy-handle" property,
"fixed-link" and "mdio" sub-node. These allows the enumeration
of PHYs which are supported by the phy library under drivers/net/phy.

The EMAC ethernet controller in IBM and AMCC 4xx chips is
currently stuck with a few privately defined phy
implementations. It has no support for PHYs which
are supported by the generic phylib.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: Do not perform software reset for Generic PHY

The Generic PHY driver is a catch-all PHY driver and it should preserve
whatever prior initialization has been done by boot loader or firmware
agents. For specific PHY device configuration it is expected that a
specialized PHY driver would take over that role.

Resetting the generic PHY was a bad idea that has lead to several
complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore
the behavior prior to 87aa9f9c61ad ("net: phy: consolidate PHY
reset in phy_init_hw()").

Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: add get_next_key callback to LPM map

map_get_next_key callback is mandatory. Supply dummy handler.

Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix double-free in batman-adv, from Sven Eckelmann.

2) Fix packet stats for fast-RX path, from Joannes Berg.

3) Netfilter's ip_route_me_harder() doesn't handle request sockets
    properly, fix from Florian Westphal.

4) Fix sendmsg deadlock in rxrpc, from David Howells.

5) Add missing RCU locking to transport hashtable scan, from Xin Long.

6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.

7) Fix race in NAPI handling between poll handlers and busy polling,
    from Eric Dumazet.

8) TX path in vxlan and geneve need proper RCU locking, from Jakub
    Kicinski.

9) SYN processing in DCCP and TCP need to disable BH, from Eric
    Dumazet.

10) Properly handle net_enable_timestamp() being invoked from IRQ
    context, also from Eric Dumazet.

11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.

12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
    Melo.

13) Fix use-after-free in netvsc driver, from Dexuan Cui.

14) Fix max MTU setting in bonding driver, from WANG Cong.

15) xen-netback hash table can be allocated from softirq context, so use
    GFP_ATOMIC. From Anoob Soman.

16) Fix MAC address change bug in bgmac driver, from Hari Vyas.

17) strparser needs to destroy strp_wq on module exit, from WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  strparser: destroy workqueue on module exit
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  can: flexcan: fix typo in comment
  can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
  can: gs_usb: fix coding style
  can: gs_usb: Don't use stack memory for USB transfers
  ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
  ixgbe: update the rss key on h/w, when ethtool ask for it
  ...

Merge tag 'kvm-4.11-2' of git://git./virt/kvm/kvm

Pull more KVM updates from Radim Krčmář:
"Second batch of KVM changes for the 4.11 merge window:

  PPC:
   - correct assumption about ASDR on POWER9
   - fix MMIO emulation on POWER9

  x86:
   - add a simple test for ioperm
   - cleanup TSS (going through KVM tree as the whole undertaking was
     caused by VMX's use of TSS)
   - fix nVMX interrupt delivery
   - fix some performance counters in the guest

  ... and two cleanup patches"

* tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: Fix pending events injection
  x86/kvm/vmx: remove unused variable in segment_base()
  selftests/x86: Add a basic selftest for ioperm
  x86/asm: Tidy up TSS limit code
  kvm: convert kvm.users_count from atomic_t to refcount_t
  KVM: x86: never specify a sample period for virtualized in_tx_cp counters
  KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9
  KVM: PPC: Book3S HV: Fix software walk of guest process page tables

Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
"A few fixes for the docs tree, including one for a 4.11 build
  regression"

* tag 'docs-4.11-fixes' of git://git.lwn.net/linux:
  Documentation/sphinx: fix primary_domain configuration
  docs: Fix htmldocs build failure
  doc/ko_KR/memory-barriers: Update control-dependencies section
  pcieaer doc: update the link
  Documentation: Update path to sysrq.txt

Merge tag 'staging-4.11-rc1-part2' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
"Here are a few small staging and IIO driver fixes for issues that
  showed up after the big set if changes you merged last week.

  Nothing major, just small bugs resolved in some IIO drivers, a lustre
  allocation fix, and some RaspberryPi driver fixes for reported
  problems, as well as a MAINTAINERS entry update.

  All of these have been in linux-next for a week with no reported
  issues"

* tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fsl-mc: fix warning in DT ranges parser
  MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer
  staging: vchiq_2835_arm: Make cache-line-size a required DT property
  staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host()
  staging/lustre/lnet: Fix allocation size for sv_cpt_data
  iio: adc: xilinx: Fix error handling
  iio: 104-quad-8: Fix off-by-one error when addressing flag register
  iio: adc: handle unknow of_device_id data

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

- vmalloc stack regression in CCM

- Build problem in CRC32 on ARM

- Memory leak in cavium

- Missing Kconfig dependencies in atmel and mediatek

- XTS Regression on some platforms (s390 and ppc)

- Memory overrun in CCM test vector

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: vmx - Use skcipher for xts fallback
  crypto: vmx - Use skcipher for cbc fallback
  crypto: testmgr - Pad aes_ccm_enc_tv_template vector
  crypto: arm/crc32 - add build time test for CRC instruction support
  crypto: arm/crc32 - fix build error with outdated binutils
  crypto: ccm - move cbcmac input off the stack
  crypto: xts - Propagate NEED_FALLBACK bit
  crypto: api - Add crypto_requires_off helper
  crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA
  crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA
  crypto: cavium - fix leak on curr if curr->head fails to be allocated
  crypto: cavium - Fix couple of static checker errors

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull misc final vfs updates from Al Viro:
"A few unrelated patches that got beating in -next.

  Everything else will have to go into the next window ;-/"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  hfs: fix hfs_readdir()
  selftest for default_file_splice_read() infoleak
  9p: constify ->d_name handling

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
"This is the set of stuff that didn't quite make the initial pull and a
  set of fixes for stuff which did.

  The new stuff is basically lpfc (nvme), qedi and aacraid. The fixes
  cover a lot of previously submitted stuff, the most important of which
  probably covers some of the failing irq vectors allocation and other
  fallout from having the SCSI command allocated as part of the block
  allocation functions"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (59 commits)
  scsi: qedi: Fix memory leak in tmf response processing.
  scsi: aacraid: remove redundant zero check on ret
  scsi: lpfc: use proper format string for dma_addr_t
  scsi: lpfc: use div_u64 for 64-bit division
  scsi: mac_scsi: Fix MAC_SCSI=m option when SCSI=m
  scsi: cciss: correct check map error.
  scsi: qla2xxx: fix spelling mistake: "seperator" -> "separator"
  scsi: aacraid: Fixed expander hotplug for SMART family
  scsi: mpt3sas: switch to pci_alloc_irq_vectors
  scsi: qedf: fixup compilation warning about atomic_t usage
  scsi: remove scsi_execute_req_flags
  scsi: merge __scsi_execute into scsi_execute
  scsi: simplify scsi_execute_req_flags
  scsi: make the sense header argument to scsi_test_unit_ready mandatory
  scsi: sd: improve TUR handling in sd_check_events
  scsi: always zero sshdr in scsi_normalize_sense
  scsi: scsi_dh_emc: return success in clariion_std_inquiry()
  scsi: fix memory leak of sdpk on when gd fails to allocate
  scsi: sd: make sd_devt_release() static
  scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.
  ...

strparser: destroy workqueue on module exit

Fixes: 43a0c6751a32 ("strparser: Stream parser for messages")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Missing check for full sock in ip_route_me_harder(), from
   Florian Westphal.

2) Incorrect sip helper structure initilization that breaks it when
   several ports are used, from Christophe Leroy.

3) Fix incorrect assumption when looking up for matching with adjacent
   intervals in the nft_set_rbtree.

4) Fix broken netlink event error reporting in nf_tables that results
   in misleading ESRCH errors propagated to userspace listeners.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
"A fix and regression test case for nvdimm namespace label
  compatibility.

  Details:

   - An "nvdimm namespace label" is metadata on an nvdimm that
     provisions dimm capacity into a "namespace" that can host a block
     device / dax-filesytem, or a device-dax character device.

     A namespace is an object that other operating environment and
     platform firmware needs to comprehend for capabilities like booting
     from an nvdimm.

     The label metadata contains a checksum that Linux was not
     calculating correctly leading to other environments rejecting the
     Linux label.

   These have received a build success notification from the kbuild
   robot, and a positive test result from Nick who reported the problem"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nfit, libnvdimm: fix interleave set cookie calculation
  tools/testing/nvdimm: make iset cookie predictable

Merge tag 'pci-v4.11-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

- fix NULL pointer dereferences in many DesignWare-based drivers due to
   refactoring error

- fix Altera config write breakage due to my refactoring error

* tag 'pci-v4.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: altera: Fix TLP_CFG_DW0 for TLP write
  PCI: dwc: Fix crashes seen due to missing assignments

Merge branch 'parisc-4.11-1' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes and cleanups from Helge Deller:
"Nothing really important in this patchset: fix resource leaks in error
  paths, coding style cleanups and code removal"

* 'parisc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Remove flush_user_dcache_range and flush_user_icache_range
  parisc: fix a printk
  parisc: ccio-dma: Handle return NULL error from ioremap_nocache
  parisc: Define access_ok() as macro
  parisc: eisa: Fix resource leaks in error paths
  parisc: eisa: Remove coding style errors

Merge tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

- clean up bootable image build targets: provide separate 'Image',
   'zImage' and 'uImage' make targets that only build corresponding
   image type. Make 'all' build all images appropriate for a platform

- allow merging vectors code into .text section as a preparation step
   for XIP support

- fix handling external FDT when the kernel is built without
   BLK_DEV_INITRD support

* tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: allow merging vectors into .text section
  xtensa: clean up bootable image build targets
  xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD

Merge tag 'armsoc-late' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
"These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...

Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull SMB3 fixes from Steve French:
"Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global
  namespace) which previously was only enabled for CIFS"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  smb2: Enforce sec= mount option
  CIFS: Fix sparse warnings
  CIFS: implement get_dfs_refer for SMB2+
  CIFS: use DFS pathnames in SMB2+ Create requests
  CIFS: set signing flag in SMB2+ TreeConnect if needed
  CIFS: let ses->ipc_tid hold smb2 TreeIds
  CIFS: add use_ipc flag to SMB2_ioctl()
  CIFS: add build_path_from_dentry_optional_prefix()
  CIFS: move DFS response parsing out of SMB1 code
  CIFS: Fix possible use after free in demultiplex thread

Documentation/sphinx: fix primary_domain configuration

With Sphinx 1.5.3 I get the warning:

WARNING: primary_domain 'C' not found, ignored.

It seems that domain names in Sphinx are case-sensitive and for the C
domain the name must be lower case.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

docs: Fix htmldocs build failure

Build of HTML docs failing due to conversion of deviceiobook.tmpl in
8a8a602f and regulator.tmpl in 028f2533 to RST without removing from
DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the
following error:

make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop.
Makefile:1452: recipe for target 'htmldocs' failed
make: *** [htmldocs] Error 2

Update DOCBOOKS to reflect available books.

Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

doc/ko_KR/memory-barriers: Update control-dependencies section

This commit applies upstream change, commit c8241f8553e8 ("doc: Update
control-dependencies section of memory-barriers.txt"), to Korean
translation.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

pcieaer doc: update the link

The original link is empty, replace it.

Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Documentation: Update path to sysrq.txt

Commit 9d85025b0418 ("docs-rst: create an user's manual book") moved the
sysrq.txt leaving old paths in the kernel docs.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse update from Miklos Szeredi:
"A bugfix and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: release: private_data cannot be NULL
  fuse: cleanup fuse_file refcounting
  fuse: add missing FR_FORCE

Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
"Because copy up can take a long time, serialized copy ups could be a
  big performance bottleneck. This update allows concurrent copy up of
  regular files eliminating this potential problem.

  There are also minor fixes"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: drop CAP_SYS_RESOURCE from saved mounter's credentials
  ovl: properly implement sync_filesystem()
  ovl: concurrent copy up of regular files
  ovl: introduce copy up waitqueue
  ovl: copy up regular file using O_TMPFILE
  ovl: rearrange code in ovl_copy_up_locked()
  ovl: check if upperdir fs supports O_TMPFILE

Merge branch 'rebased-statx' of git://git./linux/kernel/git/viro/vfs

Pull vfs 'statx()' update from Al Viro.

This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.

It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?

From David Howells.

Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:

https://www.spinics.net/lists/linux-fsdevel/msg33831.html

* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
  issues, or parts that were waiting for acks to come in. This pull
  request contains:

   - Allocation of nvme queues on the right node from Shaohua.

     This was ready long before the merge window, but waiting on an ack
     from Bjorn on the PCI bit. Now that we have that, the three patches
     can go in.

   - Two fixes for blk-mq-sched with nvmeof, which uses hctx specific
     request allocations. This caused an oops. One part from Sagi, one
     part from Omar.

   - A loop partition scan deadlock fix from Omar, fixing a regression
     in this merge window.

   - A three-patch series from Keith, closing up a hole on clearing out
     requests on shutdown/resume.

   - A stable fix for nbd from Josef, fixing a leak of sockets.

   - Two fixes for a regression in this window from Jan, fixing a
     problem with one of his earlier patches dealing with queue vs bdi
     life times.

   - A fix for a regression with virtio-blk, causing an IO stall if
     scheduling is used. From me.

   - A fix for an io context lock ordering problem. From me"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Move bdi_unregister() to del_gendisk()
  blk-mq: ensure that bd->last is always set correctly
  block: don't call ioc_exit_icq() with the queue lock held for blk-mq
  block: Initialize bd_bdi on inode initialization
  loop: fix LO_FLAGS_PARTSCAN hang
  nvme: Complete all stuck requests
  blk-mq: Provide freeze queue timeout
  blk-mq: Export blk_mq_freeze_queue_wait
  nbd: stop leaking sockets
  blk-mq: move update of tags->rqs to __blk_mq_alloc_request()
  blk-mq: kill blk_mq_set_alloc_data()
  blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request
  blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset
  nvme: allocate nvme_queue in correct node
  PCI: add an API to get node from vector
  blk-mq: allocate blk_mq_tags and requests in correct node

Merge branch 'WIP.sched-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
  <linux/sched.h> header footprint, to speed up the kernel build and to
  have a cleaner header structure.

  After these changes the new <linux/sched.h>'s typical preprocessed
  size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
  lines), which is around 40% faster to build on typical configs.

  Not much changed from the last version (-v2) posted three weeks ago: I
  eliminated quirks, backmerged fixes plus I rebased it to an upstream
  SHA1 from yesterday that includes most changes queued up in -next plus
  all sched.h changes that were pending from Andrew.

  I've re-tested the series both on x86 and on cross-arch defconfigs,
  and did a bisectability test at a number of random points.

  I tried to test as many build configurations as possible, but some
  build breakage is probably still left - but it should be mostly
  limited to architectures that have no cross-compiler binaries
  available on kernel.org, and non-default configurations"

* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
  sched/headers: Clean up <linux/sched.h>
  sched/headers: Remove #ifdefs from <linux/sched.h>
  sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
  sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
  sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
  sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
  sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
  sched/core: Remove unused prefetch_stack()
  sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
  sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
  sched/headers: Remove <linux/signal.h> from <linux/sched.h>
  sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
  sched/headers: Remove the runqueue_is_locked() prototype
  sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
  sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
  sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
  ...

Merge tag 'linux-kselftest-4.11-rc1-urgent_fix' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
"This update consists of an urgent fix for individual test build
failures introduced in the 4.11-rc1 update"

* tag 'linux-kselftest-4.11-rc1-urgent_fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: lib.mk Fix individual test builds

Merge branch 'sfx-fixes'

Edward Cree says:

====================
sfc: couple of fixes

First patch addresses a construct that causes sparse to error out.
With that fixed, sparse makes some warnings on ef10.c, second patch
fixes one of them.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: fix IPID endianness in TSOv2

The value we read from the header is in network byte order, whereas
EFX_POPULATE_QWORD_* takes values in host byte order (which it then
converts to little-endian, as MCDI is little-endian).

Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: avoid max() in array size

It confuses sparse, which thinks the size isn't constant. Let's achieve
the same thing with a BUILD_BUG_ON, since we know which one should be
bigger and don't expect them ever to change.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.11-20170303' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2017-03-03

this is a pull request for the upcoming v4.11 release.

There are two patches by Ethan Zonca for the gs_usb driver, the first one fixes
the memory used for USB transfers, the second one the coding style.

The last two patches are by me, one fixing a memory leak in the usb_8dev driver
the other a typo in the flexcan driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rds: remove unnecessary returned value check

The function rds_trans_register always returns 0. As such, it is not
necessary to check the returned value.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix potential NULL-pointer exception

Fix a potential NULL-pointer exception in rxrpc_do_sendmsg(). The call
state check that I added should have gone into the else-body of the
if-statement where we actually have a call to check.

Found by CoverityScan CID#1414316 ("Dereference after null check").

Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'nfp-fixes'

Jakub Kicinski says:

====================
nfp: RX and XDP buffer fixes

Two trivial fixes for code introduced with XDP support. First
one corrects the buffer size we populate a register with. The
register is designed to be used for scatter transfers which
the driver (and most FWs) don't support so it's not critical.
The other one for DMA direction is mostly cosmetic, DMA API
doesn't seem to care today about the precise direction in sync
calls.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: correct DMA direction in XDP DMA sync

dma_sync_single_for_*() takes the direction in which the buffer
was mapped, not the direction of the sync. We should sync XDP
buffers bidirectionally.

Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: don't tell FW about the reserved buffer space

Since commit c0f031bc8866 ("nfp_net: use alloc_frag() and build_skb()")
we are allocating buffers which have to hold both the data and skb to
be created in place by build_skb().

FW should only be told about the buffer space it can DMA to, that
is without the build_skb() headroom and tailroom. Note: firmware
applications should validate the buffers against both MTU and
free list buffer size so oversized packets would not pass through
the NIC anyway.

Fixes: c0f031bc8866 ("nfp: use alloc_frag() and build_skb()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bgmac-fixes'

Jon Mason says:

====================
net: ethernet: bgmac: bug fixes

Changes in v5:
* Rebased to the latest code and fixed up a compile error due to the
  mac_addr struct going away (found by David Miller)

Changes in v4:
* Added the udelays from the previous code (per David Miller)

Changes in v3:
* Reworked the init sequence patch to only remove the device reset if
  the device is actually in reset.  Given that this code doesn't bear
  much resemblance to the original code, I'm changing the author of the
  patch.  This was tested on NS2 SVK.

Changes in v2:
* Reworked the first match to make it more obvious what portions of the
  register were being preserved (Per Rafal Mileki)
* Style change to reorder the function variables in patch 2 (per Sergei
  Shtylyov)

Bug fixes for bgmac driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: bgmac: mac address change bug

ndo_set_mac_address() passes struct sockaddr * as 2nd parameter to
bgmac_set_mac_address() but code assumed u8 *. This caused two bytes
chopping and the wrong mac address was configured.

Signed-off-by: Hari Vyas <hariv@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 4e209001b86 ("bgmac: write mac address to hardware in ndo_set_mac_address")
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: bgmac: init sequence bug

Fix a bug in the 'bgmac' driver init sequence that blind writes for init
sequence where it should preserve most bits other than the ones it is
deliberately manipulating.

The code now checks to see if the adapter needs to be brought out of
reset (where as before it was doing an IDM write to bring it out of
reset regardless of whether it was in reset or not). Also, removed
unnecessary usleeps (as there is already a read present to flush the
IDM writes).

Signed-off-by: Zac Schroff <zschroff@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f6a95a24957 ("net: ethernet: bgmac: Add platform device support")
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'xen-netback-fixes'

Paul Durrant says:

====================
xen-netback: update memory leak fix to avoid BUG

Commit 9a6cdf52b85e "xen-netback: fix memory leaks on XenBus disconnect"
added missing code to fix a memory leak by calling vfree() in the
appropriate place.
Unfortunately subsequent commit f16f1df65f1c "xen-netback: protect
resource cleaning on XenBus disconnect" then wrapped this call to vfree()
in a spin lock, leading to a BUG due to incorrect context.

Patch #1 makes the existing code more readable
Patch #2 fixes the problem
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: don't vfree() queues under spinlock

This leads to a BUG of the following form:

[  174.512861] switch: port 2(vif3.0) entered disabled state
[  174.522735] BUG: sleeping function called from invalid context at
/home/build/linux-linus/mm/vmalloc.c:1441
[  174.523451] in_atomic(): 1, irqs_disabled(): 0, pid: 28, name: xenwatch
[  174.524131] CPU: 1 PID: 28 Comm: xenwatch Tainted: G        W
4.10.0upstream-11073-g4977ab6-dirty #1
[  174.524819] Hardware name: MSI MS-7680/H61M-P23 (MS-7680), BIOS V17.0
03/14/2011
[  174.525517] Call Trace:
[  174.526217]  show_stack+0x23/0x60
[  174.526899]  dump_stack+0x5b/0x88
[  174.527562]  ___might_sleep+0xde/0x130
[  174.528208]  __might_sleep+0x35/0xa0
[  174.528840]  ? _raw_spin_unlock_irqrestore+0x13/0x20
[  174.529463]  ? __wake_up+0x40/0x50
[  174.530089]  remove_vm_area+0x20/0x90
[  174.530724]  __vunmap+0x1d/0xc0
[  174.531346]  ? delete_object_full+0x13/0x20
[  174.531973]  vfree+0x40/0x80
[  174.532594]  set_backend_state+0x18a/0xa90
[  174.533221]  ? dwc_scan_descriptors+0x24d/0x430
[  174.533850]  ? kfree+0x5b/0xc0
[  174.534476]  ? xenbus_read+0x3d/0x50
[  174.535101]  ? xenbus_read+0x3d/0x50
[  174.535718]  ? xenbus_gather+0x31/0x90
[  174.536332]  ? ___might_sleep+0xf6/0x130
[  174.536945]  frontend_changed+0x6b/0xd0
[  174.537565]  xenbus_otherend_changed+0x7d/0x80
[  174.538185]  frontend_changed+0x12/0x20
[  174.538803]  xenwatch_thread+0x74/0x110
[  174.539417]  ? woken_wake_function+0x20/0x20
[  174.540049]  kthread+0xe5/0x120
[  174.540663]  ? xenbus_printf+0x50/0x50
[  174.541278]  ? __kthread_init_worker+0x40/0x40
[  174.541898]  ret_from_fork+0x21/0x2c
[  174.548635] switch: port 2(vif3.0) entered disabled state

This patch defers the vfree() until after the spinlock is released.

Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: keep a local pointer for vif in backend_disconnect()

This patch replaces use of 'be->vif' with 'vif' and hence generally
makes the function look tidier. No semantic change.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2017-03-02

This series contains fixes to ixgbe only.

Paolo fixes the driver so that you can actually update the RSS key value
via ethtool.

Alex fixes an issue on architectures that have a cache line size larger
than 64 Bytes, where the amount of headroom for the frame starts
shrinking. To take this into account, Alex adds one small check so that
we compare the max_frame to the amount of actual data we can store, so
we will automatically enable 3K receive buffers as soon as the maximum
frame size we can handle drops below the standard Ethernet MTU.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails

The underlying nlmsg_multicast() already sets sk->sk_err for us to
notify socket overruns, so we should not do anything with this return
value. So we just call nfnetlink_set_err() if:

1) We fail to allocate the netlink message.

or

2) We don't have enough space in the netlink message to place attributes,
which means that we likely need to allocate a larger message.

Before this patch, the internal ESRCH netlink error code was propagated
to userspace, which is quite misleading. Netlink semantics mandate that
listeners just hit ENOBUFS if the socket buffer overruns.

Reported-by: Alexander Alemayhu <alexander@alemayhu.com>
Tested-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups

In case of adjacent ranges, we may indeed see either the high part of
the range in first place or the low part of it. Remove this incorrect
assumption, let's make sure we annotate the low part of the interval in
case of we have adjacent interva intervals so we hit a matching in
lookups.

Reported-by: Simon Hanisch <hanisch@wh2.tu-dresden.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack_sip: fix wrong memory initialisation

In commit 82de0be6862cd ("netfilter: Add helper array
register/unregister functions"),
struct nf_conntrack_helper sip[MAX_PORTS][4] was changed to
sip[MAX_PORTS * 4], so the memory init should have been changed to
memset(&sip[4 * i], 0, 4 * sizeof(sip[i]));

But as the sip[] table is allocated in the BSS, it is already set to 0

Fixes: 82de0be6862cd ("netfilter: Add helper array register/unregister functions")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

can: flexcan: fix typo in comment

This patch fixes the typo "Disble" -> "Disable".

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer

The priv->cmd_msg_buffer is allocated in the probe function, but never
kfree()ed. This patch converts the kzalloc() to resource-managed
kzalloc.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: gs_usb: fix coding style

This patch fixes five minor style issues, spaces are between bitwise OR
operators.

Signed-off-by: Ethan Zonca <e@ethanzonca.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can: gs_usb: Don't use stack memory for USB transfers

Fixes: 05ca5270005c can: gs_usb: add ethtool set_phys_id callback to locate physical device
The gs_usb driver is performing USB transfers using buffers allocated on
the stack. This causes the driver to not function with vmapped stacks.
Instead, allocate memory for the transfer buffers.

Signed-off-by: Ethan Zonca <e@ethanzonca.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.8
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

smb2: Enforce sec= mount option

If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.

The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.

For SMB2, we also use ntlmv2 as a synonym for nltmssp.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

CIFS: Fix sparse warnings

Fix two minor sparse compile check warnings

Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines

On architectures that have a cache line size larger than 64 Bytes we start
running into issues where the amount of headroom for the frame starts
shrinking.

The size of skb_shared_info on a system with a 64B L1 cache line size is
320.  This increases to 384 with a 128B cache line, and 512 with a 256B
cache line.

In addition the NET_SKB_PAD value increases as well consistent with the
cache line size.  As a result when we get to a 256B cache line as seen on
the s390 we end up 768 bytes used by padding and shared info leaving us
with only 1280 bytes to use for data storage.  On architectures such as
this we should default to using 3K Rx buffers out of a 8K page instead of
trying to do 1.5K buffers out of a 4K page.

To take all of this into account I have added one small check so that we
compare the max_frame to the amount of actual data we can store.  This was
already occurring for igb, but I had overlooked it for ixgbe as it doesn't
have strict limits for 82599 once we enable jumbo frames.  By adding this
check we will automatically enable 3K Rx buffers as soon as the maximum
frame size we can handle drops below the standard Ethernet MTU.

I also went through and fixed one small typo that I found where I had left
an IGB in a variable name due to a copy/paste error.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

statx: Add a system call to make enhanced file info available

Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

(1) Make the fields a consistent size on all arches and make them large.

(2) Spare space, request flags and information flags are provided for
     future expansion.

(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

(4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

(5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

(7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

(8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

(9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};

struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};

The defined bits in request_mask and stx_mask are:

STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

STATX_ATTR_AUTOMOUNT Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

(0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

(2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

(3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
  Size: 4096            Blocks: 8          IO Block: 1048576  directory
Device: 00:26           Inode: 1703937     Links: 125
Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
  Size: 4096            Blocks: 8          IO Block: 1048576  directory
Device: 00:27           Inode: 2           Links: 125
Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'pm-turbostat-4.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull turbostat utility updates from Rafael Wysocki:
"Power management turbostat utility updates.

  These update turbostat significantly and in particular:

   - default output is now verbose, --debug is no longer required to get
     all counters. As a result, some options have been added to specify
     exactly what output is wanted.

   - added --quiet to skip system configuration output

   - added --list, --show and --hide parameters

   - added --cpu parameter

   - enhanced Baytrail SoC support

   - added Gemini Lake SoC support

   - added sysfs C-state columns

  Also the symbol definitions in arch/x86/include/asm/intel-family.h and
  arch/x86/include/asm/msr-index.h are updated and the intel_idle and
  intel_pstate drivers are modified to use the updated symbols.

  Credits to Len Brown for all of these changes"

* tag 'pm-turbostat-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
  tools/power turbostat: version 17.02.24
  tools/power turbostat: bugfix: --add u32 was printed as u64
  tools/power turbostat: show error on exec
  tools/power turbostat: dump p-state software config
  tools/power turbostat: show package number, even without --debug
  tools/power turbostat: support "--hide C1" etc.
  tools/power turbostat: move --Package and --processor into the --cpu option
  tools/power turbostat: turbostat.8 update
  tools/power turbostat: update --list feature
  tools/power turbostat: use wide columns to display large numbers
  tools/power turbostat: Add --list option to show available header names
  tools/power turbostat: fix zero IRQ count shown in one-shot command mode
  tools/power turbostat: add --cpu parameter
  tools/power turbostat: print sysfs C-state stats
  tools/power turbostat: extend --add option to accept /sys path
  tools/power turbostat: skip unused counters on BDX
  tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits
  tools/power turbostat: skip unused counters on SKX
  tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7
  tools/power turbostat: initial Gemini Lake SOC support
  ...

Merge tag 'acpi-extra-4.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"This fixes an apparent, but actually artificial, resource conflict
  between the ACPI NVS memory region and the ACPI BERT (Boot Error
  Record Table) address range (Huang Ying)"

* tag 'acpi-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: APEI: Fix BERT resources conflict with ACPI NVS area

Merge tag 'pm-extra-4.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates deom Rafael Wysocki:
"These fix two bugs introduced by recent power management updates (in
  the cpuidle menu governor and intel_pstate) and a few other issues,
  clean up things and remove unused code.

  Specifics:

   - Fix for a cpuidle menu governor problem that started to take an
     unnecessary spinlock after one of the recent updates and that did
     not play well with the RT patch (Rafael Wysocki).

   - Fix for the new intel_pstate operation mode switching feature added
     recently that did not reinitialize P-state limits properly when
     switching operation modes (Rafael Wysocki).

   - Removal of unused global notifiers from the PM QoS framework
     (Viresh Kumar).

   - Generic power domains framework update to make it handle
     asynchronous invocations of PM callbacks in the "noirq" phases of
     system suspend/hibernation correctly (Ulf Hansson).

   - Two hibernation core cleanups (Rafael Wysocki).

   - intel_idle cleanup related to the sysfs interface (Len Brown).

   - Off-by-one bug fix in the OPP (Operating Performance Points)
     framework (Andrzej Hajda).

   - OPP framework's documentation fix (Viresh Kumar).

   - cpufreq qoriq driver cleanup (Tang Yuantian).

   - Fixes for typos in comments in the device runtime PM framework
     (Christophe Jaillet)"

* tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Documentation: Fix opp-microvolt in examples
  intel_idle: stop exposing platform acronyms in sysfs
  cpufreq: intel_pstate: Fix limits issue with operation mode switching
  PM / hibernate: Define pr_fmt() and use pr_*() instead of printk()
  PM / hibernate: Untangle power_down()
  cpuidle: menu: Avoid taking spinlock for accessing QoS values
  PM / QoS: Remove global notifiers
  PM / runtime: Fix some typos
  cpufreq: qoriq: clean up unused code
  PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
  PM / Domains: Power off masters immediately in the power off sequence
  PM / Domains: Rename is_async to one_dev_on for genpd_power_off()
  PM / Domains: Move genpd_power_off() above genpd_power_on()

ixgbe: update the rss key on h/w, when ethtool ask for it

Currently ixgbe_set_rxfh() updates the rss_key copy in the driver
memory, but does not push the new value into the h/w. This commit
add a new helper for the latter operation and call it in
ixgbe_set_rxfh(), so that the h/w rss key value can be really
updated via ethtool.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

sched/headers: Clean up <linux/sched.h>

Now that <linux/sched.h> dependencies have been sorted out,
do various trivial cleanups:

- remove unnecessary structure predeclarations
- fix various typos
- update comments where necessary
- remove pointless comments
- use consistent types
- tabulate consistently
- use a consistent comment style
- clean up the header section a bit
- use a consistent style of a single field per line
- remove line-breaks where they make the code look worse
- etc ...

No change in functionality.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Remove #ifdefs from <linux/sched.h>

We can remove two pairs of #ifdefs by defining structures in a smarter way.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>

It's used only by a single (rarely used) inline function (task_node(p)),
which we can move to <linux/sched/topology.h>.

( Add <linux/nodemask.h>, because we rely on that. )

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>

In our quest to simplify <linux/sched.h>'s header dependencies, remove
the <linux/wait.h> inclusion from <linux/hrtimer.h> - which does
not appear to be necessary, as hrtimer.h does not use waitqueues.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>

We want to simplify <linux/sched.h>'s header dependencies, but one
roadblock to that is <asm/apic.h>'s inclusion of pm.h,
which brings in other, problematic headers.

Remove it, as it appears to be entirely spurious, apic.h does not
actually make use of any PM facilities.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>

So we want to simplify <linux/sched.h>'s header dependencies, but one
roadblock of that is <linux/timer.h>'s inclusion of sysctl.h,
which brings in other, problematic headers.

Note that timer.h's inclusion of sysctl.h can be avoided if we
pre-declare ctl_table - so do that.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>

It's not used by any of the scheduler methods, but <linux/sched/task_stack.h>
needs it to pick up STACK_END_MAGIC.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>

The <linux/sched/init.h> file is a self-contained header and users of
it either don't need <linux/sched.h> - or have already included it.

This reduces the size of the header dependency graph.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/core: Remove unused prefetch_stack()

prefetch_stack() is defined by IA64, but not actually used anywhere anymore.

Remove it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Remove <linux/rculist.h> from <linux/sched.h>

We don't actually need the full rculist.h header anymore, include
the smaller rcupdate.h header instead.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>

pid.h already defines it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>