git.openwrt.org Git - openwrt/staging/blogic.git/log

drm/i915/selftests: Refactor common live_test framework

Before adding yet another copy of struct live_test and its handler,
refactor the existing code into a common framework for live selftests.
For many live selftests, we want to know if the GPU hung or otherwise
misbehaved during the execution of the test (beyond any infraction in
the behaviour under test), live_test provides this by comparing the
GPU state before and after, alerting if it unexpectedly changed (e.g.
the reset counter changed). It also ensures that the GPU is idle before
and after the test, so that residual code running on the GPU is flushed
before testing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-5-chris@chris-wilson.co.uk

drm/i915/selftests: Create a clean GGTT for vma/gtt selftesting

Some tests (e.g. igt_vma_pin1) presume that we have a completely clean
GGTT so that it can probe boundaries without fear that something is
already allocated there. However, the mock device is starting to get
complicated and following similar rules to the live device, i.e. we
can't guarantee that i915->ggtt remains clean, so create a temporary
address_space equivalent to the mock ggtt for the purpose.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-7-chris@chris-wilson.co.uk

drm/i915/selftests: Track evict objects explicitly

During review of commit 71fc448c1aaf ("drm/i915/selftests: Make evict
tolerant of foreign objects"), Matthew mentioned it would be better if
we explicitly tracked the objects we created. We have an obj->st_link
hook for this purpose, so add the corresponding list of objects and
reduce our loops to only consider our own list.

References: 71fc448c1aaf ("drm/i915/selftests: Make evict tolerant of foreign objects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190121222117.23305-6-chris@chris-wilson.co.uk

drm/i915/dsi: Enable dithering for 6 bpc panels

The display engine has 2 dithering enable bits which both need to be set
for dithering to happen, 1 in the PIPECONF register which is taken care of
by i9xx_set_pipeconf() and a second bit at the encoder level.

The dsi code was not setting the encoder level dithering enable bit causing
dithering to be disabled, this commit fixes this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-2-hdegoede@redhat.com

drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formats

There are 3 problems with the dsi code's pipe_bpp handling for 6 bpc
pixel-formats which this commit addresses:

1) It assumes that the pipe_bpp is the same as the bpp going over the dsi
lanes. This assumption is not valid for MIPI_DSI_FMT_RGB666, where pipe_bpp
should be 18 so that we do proper dithering but we actually send 24 bpp
over the dsi lanes (MIPI_DSI_FMT_RGB666_PACKED sends 18 bpp).

This assumption is enforced by an assert in *_dsi_get_pclk(). This assert
triggers on the initial hw-state readback on BYT/CHT devices which use
MIPI_DSI_FMT_RGB666, such as the Prowise PT301 tablet. PIPECONF is set to
6BPC / 18 bpp by the GOP, while mipi_dsi_pixel_format_to_bpp() returns 24.

This commits switches the calculations in *_dsi_get_pclk() to use the bpp
from mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format) which
returns the bpp going over the mipi lanes and drops the assert.

2) On BXT bxt_dsi_get_pipe_config() wrongly overrides the pipe_bpp which
i9xx_get_pipe_config() reads from PIPECONF with the return value from
mipi_dsi_pixel_format_to_bpp(). This avoids the assert from 1. but is wrong
since the pipe is actually running at the value configured in PIPECONF.

This commit drops the override of pipe_bpp from bxt_dsi_get_pipe_config().

3) The dsi encoder's compute_config() never assigns a value to pipe_bpp,
unlike most other encoders. Falling back on compute_baseline_pipe_bpp()
which always picks 24. 24 is only correct for MIPI_DSI_FMT_RGB88 for the
others we should use 18 bpp so that we correctly do 6bpc color dithering.

This commit adds code to intel_dsi_compute_config() to properly set
pipe_bpp based on intel_dsi->pixel_format.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201113148.23184-1-hdegoede@redhat.com

drm/i915: Prevent use of global_seqno=0

We are not allowed to assign rq->global_seqno=0 as it has a special
meaning of "inactive" (not executing on HW).

Fixes: 6faf5916e6be ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190119143024.26971-1-chris@chris-wilson.co.uk

drm/i915/intel_drv.h: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-8-jani.nikula@intel.com

drm/i915/i915_drv.h: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-7-jani.nikula@intel.com

drm/i915/display: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-6-jani.nikula@intel.com

drm/i915/csr: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitepace fixes sprinkled on top of the changed lines.

v2: more whitespace fixes (Ville, José)

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-5-jani.nikula@intel.com

drm/i915/ddi: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-4-jani.nikula@intel.com

drm/i915/pm: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-3-jani.nikula@intel.com

drm/i915/color: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-2-jani.nikula@intel.com

drm/i915/selftests: Allocate mock ring/timeline per context

To correctly simulate preemption between contexts, we need independent
timelines along each context. Make it so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118190805.11792-1-chris@chris-wilson.co.uk

drm/i915/dp: remove PANEL_POWER_OFF macro and its use

It's superfluous.

Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7987938a7950853ac3ee43c82fb9cbb0cd59a2fa.1547726792.git.jani.nikula@intel.com

drm/i915/selftests: Make evict tolerant of foreign objects

The evict selftests presumed that all objects in use had been allocated
by itself. This is a dubious claim and so instead of asserting complete
control over the object lists, take (temporary) ownership of them
instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118113632.7056-1-chris@chris-wilson.co.uk

drm/i915: Use b->irq_enable() as predicate for mock engine

Since commit d4ccceb05591 ("drm/i915/icl: Ringbuffer interrupt handling")
we have required a mechanism to avoid touching the interrupt hardware
for breadcrumbs, superseding our mock interface for selftests.

The residual problem (ideas welcome) is in probing the mock ring
registers for ring_is_idle. Hmm, maybe we should just install
mock handlers for i915->uncore.mmio__write and friends? Only problem
being is that we would to truly mock some expected reads. :(

References: d4ccceb05591 ("drm/i915/icl: Ringbuffer interrupt handling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118112225.13780-1-chris@chris-wilson.co.uk

drm/i915/selftests: Query the vm under test for hugepage support

Since we have the ppgtt we want to test, we can ask it directly if it is
suitable for the hugepage test we intend to undertake.

v2: Not everyone has full-ppgtt

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117230512.4789-1-chris@chris-wilson.co.uk

drm/i915/breadcrumbs: Drop assertion that we've already enabled irqs

The motivation for introducing the check that we only enable breadcrumb
irqs if the device's irq was installed was once upon a time we waited
during suspend after disabling interrupts (which was quite slow until
the bug was discovered). Since then we have the notion of pinning the
breadcrumb irq, broadening it from the sole purpose of user interrupt
notification and waiting, and more importantly decoupling it from a very
defined time period during which enabling the irq was expected. So stop
insisting the irq is installed before we setup our IMR masks, if the IER
isn't yet enabled, nothing will happen and we will timeout instead,
revealing the lack of irq in the hang debug messages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117233126.30165-1-chris@chris-wilson.co.uk

drm/i915: Fix wakeref cookie handling in debugfs/i915_forcewake_user

To avoid a false positive of a leaked wakeref, we can store the cookie
in file->private_data and use it in intel_runtime_pm_put.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117144831.13156-1-tvrtko.ursulin@linux.intel.com

drm/i915: Limit the for_each_set_bit() to the valid range

Let static analyzers (smatch) know that we are not going to wander off
the end of the array by providing a tight upper bound:

drivers/gpu/drm/i915/intel_display.c:9532 hsw_get_transcoder_state() error: buffer overflow 'dev_priv->__info.trans_offsets' 6 <= 31

References: 0716931a82b4 ("drm/i915/icl: fix transcoder state readout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116155421.7660-1-chris@chris-wilson.co.uk

drm/i915/sprite: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/63fe4b9727b55727190e50e57427f513d204f000.1547629303.git.jani.nikula@intel.com

drm/i915/dp: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitespace fixes sprinkled on top of the changed lines.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c030a12b4313eec512ce2b7a953cff439d8af67.1547629303.git.jani.nikula@intel.com

drm/i915/dpll_mgr: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch/whitespace fixes sprinkled on top of the changed lines.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b73aefabb757acf59896bd77dbb20c2e343c6e6d.1547629303.git.jani.nikula@intel.com

drm/i915/cdclk: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b56d250007a5d85d15038962548abb3e1818480a.1547629303.git.jani.nikula@intel.com

drm/i915/irq: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/841f4eac1c52f4ed3efe2ac9e343d6640c03b774.1547629303.git.jani.nikula@intel.com

drm/i915/debugfs: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4d71ed8a432b4121516049334512d35623c8acaa.1547629303.git.jani.nikula@intel.com

drm/i915/lspcon: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0c2d399bfb8fd9f90c7899eaaa0a9cab82f0d68d.1547629303.git.jani.nikula@intel.com

drm/i915/crt: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4deb1838b288e027b6483e7ebd6b7b365d0ef979.1547629303.git.jani.nikula@intel.com

drm/i915: small isolated c99 types to kernel types switch

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Minor checkpatch fixes sprinkled on top of the changed lines.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14ed72e7f04c9340a057855c5950b54811f8a477.1547629303.git.jani.nikula@intel.com

drm/i915: Pull all the reset functionality together into i915_reset.c

Currently the code to reset the GPU and our state is spread widely
across a few files. Pull the logic together into a common file.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116153304.787-1-chris@chris-wilson.co.uk

drm/i915: Serialise concurrent calls to i915_gem_set_wedged()

Make i915_gem_set_wedged() and i915_gem_unset_wedged() behaviour more
consistent if called concurrently, and only do the wedging and reporting
once, curtailing any possible race where we start unwedging in the middle
of a wedge.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114210408.4561-2-chris@chris-wilson.co.uk

drm/i915: Pass down rc in intel_encoder->compute_config()

Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.

So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.

Thanks to Ville Syrjälä for pointing this out!

Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
intel_hdmi_compute_config()

[Cherry-picked from drm-misc-next to drm-intel-next-queued to fix
linux-next & drm-tip conflict, while waiting for proper propagation of
the DP MST series that this commit fixes. In hindsight, a topic branch
might have been a better approach for it.]

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
(cherry picked from commit 96550555a78ca3c9fda4b358549a5622810fe32c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>

drm/i915/userptr: Fix error handling of mutex_lock_killable()

mutex_lock_killable() returns -EINTR on failure, not the anticipate bool
return like trylock. (Oh no, not again.)

Fixes: 484d9a844d0d ("drm/i915/userptr: Avoid struct_mutex recursion for mmu_invalidate_range_start")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115221118.13304-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Move intel_execlists_show_requests() aside

Move the debug pretty printer into a standalone routine prior to
extending it in upcoming feature work.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115212948.10423-1-chris@chris-wilson.co.uk

drm/i915/userptr: Avoid struct_mutex recursion for mmu_invalidate_range_start

Since commit 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu
notifiers") we have been able to report failure from
mmu_invalidate_range_start which allows us to use a trylock on the
struct_mutex to avoid potential recursion and report -EBUSY instead.
Furthermore, this allows us to pull the work into the main callback and
avoid the sleight-of-hand in using a workqueue to avoid lockdep.

However, not all paths to mmu_invalidate_range_start are prepared to
handle failure, so instead of reporting the recursion, deal with it by
propagating the failure upwards, who can decide themselves to handle it
or report it.

v2: Mark up the recursive lock behaviour and comment on the various weak
points.

v3: Follow commit 3824e41975ae ("drm/i915: Use mutex_lock_killable() from
inside the shrinker") and also use mutex_lock_killable().
v3.1: No leak on EINTR.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108375
References: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115124442.3500-1-chris@chris-wilson.co.uk

drm/i915/icl: Detect port F presence via VBT

Registering an output for a non-existent port (on a given SKU) can lead
to problems when trying to use the port, for instance timeouts during
power well enabling. Since there are no strap bits for port detection we
have to rely on VBT for this, so do that here.

There are no known SKUs where any of the A-E ports are non-existent, so
to reduce the likelihood of breakage due to incorrect VBT information,
do this detection only for port F (which is known to be missing on some
ICL SKUs).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108915
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220132604.25222-2-imre.deak@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/ddi: Move DDI port detection to the corresponding helper

We have already a function to detect DDI ports using VBT, so instead of
opencoding the DDI specific version of this, move the opencoded part to
the existing helper.

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220132604.25222-1-imre.deak@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Only dump GPU state on set-wedged if interesting

As we may frequently mark the device as wedged to flush requests off it
during the normal course of events, quite often we have a large state
dump that is of no interest. Don't bother dumping it all if the engines
are all idle.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115122057.1677-1-chris@chris-wilson.co.uk

drm/i915/perf: Annotate i915_perf.wakeref for keneldoc

drivers/gpu/drm/i915/i915_drv.h:1375: warning: Function parameter or member 'wakeref' not described in 'i915_perf_stream'

Reported-by: kbuild-all@01.org
Fixes: 6619c0075f78 ("drm/i915/perf: Track the rpm wakeref")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115102505.4843-1-chris@chris-wilson.co.uk

drm/i915: Fix the static code analysis warning in debugfs

intel_dp->dsc_dpcd is defined as an array making the if check redundant.

Fixes: e845f099f1c6 ("drm/i915/dsc: Add Per connector debugfs node for DSC support/enable")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109211414.15622-1-radhakrishna.sripada@intel.com

drm/i915/cnl: Fix CNL macros for Voltage Swing programming

CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.

v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)

Fixes: 4e53840fdfdd ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com

drm/i915: Prevent concurrent GGTT update and use on Braswell (again)

On Braswell, under heavy stress, if we update the GGTT while
simultaneously accessing another region inside the GTT, we are returned
the wrong values. To prevent this we stop the machine to update the GGTT
entries so that no memory traffic can occur at the same time.

This was first spotted in

commit 5bab6f60cb4d1417ad7c599166bcfec87529c1a2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Oct 23 18:43:32 2015 +0100

    drm/i915: Serialise updates to GGTT with access through GGTT on Braswell

but removed again in forlorn hope with

commit 4509276ee824bb967885c095c610767e42345c36
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Feb 20 12:47:18 2017 +0000

    drm/i915: Remove Braswell GGTT update w/a

However, gem_concurrent_blit is once again only stable with the patch
applied and CI is detecting the odd failure in forked gem_mmap_gtt tests
(which smell like the same issue). Fwiw, a wide variety of CPU memory
barriers (around GGTT flushing, fence updates, PTE updates) and GPU
flushes/invalidates (between requests, after PTE updates) were tried as
part of the investigation to find an alternate cause, nothing comes
close to serialised GGTT updates.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105591
Testcase: igt/gem_concurrent_blit
Testcase: igt/gem_mmap_gtt/*forked*
References: 5bab6f60cb4d ("drm/i915: Serialise updates to GGTT with access through GGTT on Braswell")
References: 4509276ee824 ("drm/i915: Remove Braswell GGTT update w/a")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114211729.30352-1-chris@chris-wilson.co.uk

drm/i915: Differentiate between ggtt->mutex and ppgtt->mutex

We have two classes of VM, global GTT and per-process GTT. In order to
allow ourselves the freedom to mix both along call chains, distinguish
the two classes with regards to their mutex and lockdep maps.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114215956.32266-1-chris@chris-wilson.co.uk

drm/i915: Fix ILK-IVB primary plane enable delays

Primary and sprite plane enable on ILK-IVB may take two frames to complete

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103925
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545305168-6047-1-git-send-email-juhapekka.heikkila@gmail.com

drm/i915: Mark up Ironlake ips with rpm wakerefs

Currently Ironlake operates under the assumption that rpm awake (and its
error checking is disabled). As such, we have missed a few places where we
access registers without taking the rpm wakeref and thus trigger
warnings. intel_ips being one culprit.

As this involved adding a potentially sleeping rpm_get, we have to
rearrange the spinlocks slightly and so switch to acquiring a device-ref
under the spinlock rather than hold the spinlock for the whole
operation. To be consistent, we make the change in pattern common to the
intel_ips interface even though this adds a few more atomic operations
than necessary in a few cases.

v2: Sagar noted the mb around setting mch_dev were overkill as we only
need ordering there, and that i915_emon_status was still using
struct_mutex for no reason, but lacked rpm.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-21-chris@chris-wilson.co.uk

drm/i915: Combined gt.awake/gt.power wakerefs

As the GT_IRQ power domain implies a wakeref, we can use it inplace of
our existing redundant rpm grab.

v2: Drop papering over forgetting to take the runtime wakeref in
selftests

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-20-chris@chris-wilson.co.uk

drm/i915: Complain if hsw_get_pipe_config acquires the same power well twice

As we only release each power well once, we assume that each transcoder
maps to a different domain. Complain if this is not so.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-19-chris@chris-wilson.co.uk

drm/i915/dp: Markup pps lock power well

Track where and when we acquire and release the power well for pps
access along the dp aux link, with a view to detecting if we leak any
wakerefs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-18-chris@chris-wilson.co.uk

drm/i915: Track the wakeref used to initialise display power domains

On module load and unload, we grab the POWER_DOMAIN_INIT powerwells and
transfer them to the runtime-pm code. We can use our wakeref tracking to
verify that the wakeref is indeed passed from init to enable, and
disable to fini; and across suspend.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-17-chris@chris-wilson.co.uk

drm/i915: Markup paired operations on display power domains

The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-16-chris@chris-wilson.co.uk

drm/i915: Syntatic sugar for using intel_runtime_pm

Frequently, we use intel_runtime_pm_get/_put around a small block.
Formalise that usage by providing a macro to define such a block with an
automatic closure to scope the intel_runtime_pm wakeref to that block,
i.e. macro abuse smelling of python.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-15-chris@chris-wilson.co.uk

drm/i915/selftests: Mark up rpm wakerefs

Track the temporary wakerefs used within the selftests so that leaks are
clear.

v2: Add a couple of coarse annotations for mock selftests as we now
loudly warn about the errors.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-14-chris@chris-wilson.co.uk

drm/i915/panel: Track temporary rpm wakeref

Keep track of the temporary rpm wakeref used for panel backlight access,
so that we can cancel it immediately upon release and so more clearly
identify leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-13-chris@chris-wilson.co.uk

drm/i915/hotplug: Track temporary rpm wakeref

Keep track of the temporary rpm wakeref inside hotplug detection, so
that we can cancel it immediately upon release and so clearly identify
leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-12-chris@chris-wilson.co.uk

drm/i915/fb: Track rpm wakerefs

Keep track of the rpm wakeref used for framebuffer access so that we can
cancel upon release and so more clearly identify leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-11-chris@chris-wilson.co.uk

drm/i915/gem: Track the rpm wakerefs

Keep track of the temporary rpm wakerefs used for user access to the
device, so that we can cancel them upon release and clearly identify any
leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-10-chris@chris-wilson.co.uk

drm/i915/guc: Track the rpm wakeref

Keep track of our acquired wakeref for interacting with the guc, so that
we can cancel it upon release and so clearly identify leaks.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-9-chris@chris-wilson.co.uk

drm/i915/pmu: Track rpm wakeref

Track the wakeref used for temporary access to the device, and discard
it upon release so that leaks can be identified.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-8-chris@chris-wilson.co.uk

drm/i915/perf: Track the rpm wakeref

Keep track of our wakeref used to keep the device awake so we can catch
any leak.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-7-chris@chris-wilson.co.uk

drm/i915: Mark up debugfs with rpm wakeref tracking

As debugfs has a simple pattern of taking a rpm wakeref around the user
access, we can track the local reference and drop it as soon as
possible.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-6-chris@chris-wilson.co.uk

drm/i915: Mark up sysfs with rpm wakeref tracking

As sysfs has a simple pattern of taking a rpm wakeref around the user
access, we can track the local reference and drop it as soon as
possible.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-5-chris@chris-wilson.co.uk

drm/i915: Track the rpm wakerefs for error handling

Keep hold of the local wakeref used in error handling, to cancel
the tracking upon release so that leaks can be identified.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-4-chris@chris-wilson.co.uk

drm/i915: Track GT wakeref

Record the wakeref used for keeping the device awake as the GPU is
executing requests and be sure to cancel the tracking upon parking.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-3-chris@chris-wilson.co.uk

drm/i915: Markup paired operations on wakerefs

The majority of runtime-pm operations are bounded and scoped within a
function; these are easy to verify that the wakeref are handled
correctly. We can employ the compiler to help us, and reduce the number
of wakerefs tracked when debugging, by passing around cookies provided
by the various rpm_get functions to their rpm_put counterpart. This
makes the pairing explicit, and given the required wakeref cookie the
compiler can verify that we pass an initialised value to the rpm_put
(quite handy for double checking error paths).

For regular builds, the compiler should be able to eliminate the unused
local variables and the program growth should be minimal. Fwiw, it came
out as a net improvement as gcc was able to refactor rpm_get and
rpm_get_if_in_use together,

v2: Just s/rpm_put/rpm_put_unchecked/ everywhere, leaving the manual
mark up for smaller more targeted patches.
v3: Mention the cookie in Returns

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-2-chris@chris-wilson.co.uk

drm/i915: Track all held rpm wakerefs

Everytime we take a wakeref, record the stack trace of where it was
taken; clearing the set if we ever drop back to no owners. For debugging
a rpm leak, we can look at all the current wakerefs and check if they
have a matching rpm_put.

v2: Use skip=0 for unwinding the stack as it appears our noinline
function doesn't appear on the stack (nor does save_stack_trace itself!)
v3: Allow rpm->debug_count to disappear between inspections and so
avoid calling krealloc(0) as that may return a ZERO_PTR not NULL! (Mika)
v4: Show who last acquire/released the runtime pm

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114142129.24398-1-chris@chris-wilson.co.uk

drm/i915: Update DRIVER_DATE to 20190110

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Removing polling for struct_mutex from vmap shrinker

The wait-for-idle used from within the shrinker_lock_uninterruptible
depends on the struct_mutex locking state being known and declared to
i915_request_wait(). As it is conceivable that we reach the vmap
notifier from underneath struct_mutex (and so keep on relying on the
mutex_trylock_recursive), we should not blindly call i915_request_wait.

In the process we can remove the dubious polling to acquire
struct_mutex, and simply act, or not, on a successful trylock.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109164204.23935-2-chris@chris-wilson.co.uk

drm/i915: Use mutex_lock_killable() from inside the shrinker

If the current process is being killed (it was interrupted with SIGKILL
or equivalent), it will not make any progress in page allocation and we
can abort performing the shrinking on its behalf. So we can use
mutex_lock_killable() instead (although this path should only be
reachable from kswapd currently).

Tvrtko pointed out that it should also be reachable from debugfs, which
he would prefer retain its interruptiblity. As a compromise, killable is a
step in the right direction!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109164204.23935-1-chris@chris-wilson.co.uk

drm/i915: Guard error capture against unpinned vma

If we find an incompletely setup vma inside the request/engine at the
time of a hang, it may not have vma->pages initialised, so skip
capturing the object before we iterate over NULL.

Spotted by Matthew in preparation for using unpinned vma to track engine
state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110111522.11023-1-chris@chris-wilson.co.uk

drm/i915: drop DPF code for gen8+

The only gen8+ platform that has the feature is BDW, but we don't define
the feature flag on any BDW platform and we only have partial support in
the gen8 path (irq enabling code, but no handler).
The only thing we could do in the irq handler is report the error
to userspace, but no one asked/cared about that since BDW was
released so it is relatively safe to assume that even if we added the
message no one would look at it. Just drop the dead code from the
driver instead.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109213147.16851-1-daniele.ceraolospurio@intel.com

drm/i915: init per-engine WAs for all engines

commit 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
refactored the workaround code to have functions per-engine, but didn't
call any of them from logical_xcs_ring_init. Since we do have a non-RCS
workaround for KBL (WaKBLVECSSemaphoreWaitPoll) we do need to call
intel_engine_init_workarounds for non-RCS engines.
Note that whitelist is still RCS-only.

v2: move the call to logical_ring_init (Chris)

Fixes: 4a15c75c4246 ("drm/i915: Introduce per-engine workarounds")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-2-daniele.ceraolospurio@intel.com

drm/i915/selftests: recreate WA lists inside the selftest

By using the wa lists inside the live driver structures, we won't
catch issues where those are incorrectly setup or corrupted.
To cover this gap, update the workaround framework to allow saving the
wa lists to independent structures and use them in the selftests.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110013232.8972-1-daniele.ceraolospurio@intel.com
[tursulin: Fixup checkpatch whitespace complaint in memset.]

drm/i915: Reduce i915_request_alloc retirement to local context

In the continual quest to reduce the amount of global work required when
submitting requests, replace i915_retire_requests() after allocation
failure to retiring just our ring.

v2: Don't forget the list iteration included an early break, so we would
never throttle on the last request in the ring/timeline.
v3: Use the common ring_retire_requests()

References: 11abf0c5a021 ("drm/i915: Limit the backpressure for i915_request allocation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109215932.26454-1-chris@chris-wilson.co.uk

drm/i915/intel_dsi_vbt: Add support for PMIC MIPI sequences

Add support for PMIC MIPI sequences using the new
intel_soc_pmic_exec_mipi_pmic_seq_element function.

This fixes the DSI LCD panel not lighting up when not initialized by the
GOP (because an external monitor was connected) on GPD win and GPD pocket
devices.

Specifically the LCD panel seems to need GPIO pin 9 on the PMIC to be
driven high, which is done through a PMIC MIPI sequence. Before this commit
if the sequence was not executed by the GOP the pin would stay low causing
the LCD panel to not work. Having the MIPI sequences properly control this
GPIO should also help save some power when the panel is off.

Changes in v2, v3:
-Only changes to other patches in this patch-set

Changes in v4:
-Move decoding of the raw 15 bytes PMIC MIPI sequence element into
i2c-address, register-address, value and mask into the mipi_exec_pmic()
function instead of passing the raw data to
intel_soc_pmic_exec_mipi_pmic_seq_element()

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-5-hdegoede@redhat.com

ACPI / PMIC: Add generic intel_soc_pmic_exec_mipi_pmic_seq_element handling

Most PMIC-s use only a single i2c-address, so after verifying the
i2c-address matches, we can simply pass the call to regmap_update_bits.

This commit adds support for this and hooks this up for the xpower AXP288
PMIC by setting the new pmic_i2c_address field.

This fixes the following errors on display on / off on a Jumper Ezpad
mini 3 and an Onda V80 plus tablet, both of which use the AXP288:

intel_soc_pmic_exec_mipi_pmic_seq_element: Not implemented
intel_soc_pmic_exec_mipi_pmic_seq_element: i2c-addr: 0x34 reg-addr ...
[drm:mipi_exec_pmic [i915]] *ERROR* mipi_exec_pmic failed, error: -95

Instead of these errors on both devices we now correctly turn on / off
DLDO3 (through direct register manipulation). On the Onda V80 plus this
fixes an issue with the backlight being brighter around the borders after
an off / on cycle. This should also help to save some power when the
display is off.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-4-hdegoede@redhat.com

ACPI / PMIC: Implement exec_mipi_pmic_seq_element for CHT Whiskey Cove PMIC

Implement the exec_mipi_pmic_seq_element callback for the CHT Whiskey Cove
PMIC.

On some CHT devices this fixes the LCD panel not lighting up when it was
not initialized by the GOP, because an external monitor was plugged in and
the GOP initialized only the external monitor.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-3-hdegoede@redhat.com

ACPI / PMIC: Add support for executing PMIC MIPI sequence elements

DSI LCD panels describe an initialization sequence in the Video BIOS
Tables using so called MIPI sequences. One possible element in these
sequences is a PMIC specific element of 15 bytes.

Although this is not really an ACPI opregion, the ACPI opregion code is the
closest thing we have. We need to have support for these PMIC specific MIPI
sequence elements somwhere. Since we already instantiate a special platform
device for Intel PMICs for the ACPI PMIC OpRegion handler to bind to,
with PMIC specific implementations of the OpRegion, the handling of MIPI
sequence PMIC elements fits very well in the ACPI PMIC OpRegion code.

This commit adds a new intel_soc_pmic_exec_mipi_pmic_seq_element()
function, which is to be backed by a PMIC specific
exec_mipi_pmic_seq_element callback. This function will be called by the
i915 code to execture MIPI sequence PMIC elements.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-2-hdegoede@redhat.com

drm/i915: drop all drmP.h includes

Needs just a few additional includes here and there.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108082709.3748-1-jani.nikula@intel.com

drm/i915: Downgrade scare message for unknown HuC firmware

If we haven't shipped and enabled firmware for a particular platform,
there is nothing the user can do about it. Don't scare the user with an
unactionable, unidentifiable warning!

<6> [310.769452] i915 0000:00:02.0: GuC: No firmware known for this platform!
<4> [310.769458] [drm] HuC: No firmware known for this platform!

Unify both GuC/HuC messages to include the device for which we lack the
firmware, and provide the platform name as an aide-memoire.

v2: Move and refine the message to common site of intel_uc_fw_fetch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108150246.1471-1-chris@chris-wilson.co.uk

Ndrm/i915/debugfs: store rotation string buffer on stack

Minimal change to nuke the static buf.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107145149.10069-1-jani.nikula@intel.com

drm/i915: Return immediately if trylock fails for direct-reclaim

Ignore trying to shrink from i915 if we fail to acquire the struct_mutex
in the shrinker while performing direct-reclaim. The trade-off being
(much) lower latency for non-i915 clients at an increased risk of being
unable to obtain a page from direct-reclaim without hitting the
oom-notifier. The proviso being that we still keep trying to hard
obtain the lock for kswapd so that we can reap under heavy memory
pressure.

v2: Taint all mutexes taken within the shrinker with the struct_mutex
subclass as an early warning system, and drop I915_SHRINK_ACTIVE from
vmap to reduce the number of dangerous paths. We also have to drop
I915_SHRINK_ACTIVE from oom-notifier to be able to make the same claim
that ACTIVE is only used from outside context, which fits in with a
longer strategy of avoiding stalls due to scanning active during
shrinking.

The danger in using the subclass struct_mutex is that we declare
ourselves more knowledgable than lockdep and deprive ourselves of
automatic coverage. Instead, we require ourselves to mark up any mutex
taken inside the shrinker in order to detect lock-inversion, and if we
miss any we are doomed to a deadlock at the worst possible moment.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-1-chris@chris-wilson.co.uk

Merge drm/drm-next into drm-intel-next-queued

Generally catch up with 5.0-rc1, and specifically get the changes:

96d4f267e40f ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case")
594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'topic/drmp-cleanup-2019-01-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued

Make some drm headers self-contained with includes and forward
declarations.

This topic branch has already been merged to drm-misc-next as commit
1c95f662fcee ("Merge tag 'topic/drmp-cleanup-2019-01-02' of
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next"). Now
merge it to drm-intel-next-queued to unblock some further drmP.h cleanup
without having to wait for a backmerge.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pntfl6pa.fsf@intel.com

drm/i915/selftests: Mark the whole mock device as DMA capable

Being a mock device, we suffer no DMA restrictions, so set the coherent
mask to 64b.

v2: Fix up mock_huge_selftests

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109243
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107181856.23789-1-chris@chris-wilson.co.uk

drm/i915: Report the number of closed vma held by each context in debugfs

Include the total size of closed vma when reporting the per_ctx_stats of
debugfs/i915_gem_objects.

Whilst adjusting the context tracking, note that we can simply use our
list of contexts in i915->contexts rather than circumlocute via
dev->filelist and the per-file context idr, with the result that we can
show objects allocated to different vm (i.e. contexts within a file).

We change the output to show every context of each client, with its own
unique set of objects (for full-ppgtt machines, i.e. gen7+, for older
hardware all objects are in the global gtt and so can not be associated
with a single context). That should result in no loss of information,
and for gen7+, no duplication of active objects.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-2-chris@chris-wilson.co.uk

drm/i915/hsw: Flush RING_IMR changes before changing the global GT IMR (vecs)

Haswell also requires the RING_IMR flush for its unique vebox setup to
avoid losing interrupts, as per 476af9c26063 ("drm/i915/gen6: Flush
RING_IMR changes before changing the global GT IMR"):

On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.

References: 476af9c26063 ("drm/i915/gen6: Flush RING_IMR changes before changing the global GT IMR")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105115647.4970-1-chris@chris-wilson.co.uk

drm/i915: Fixup kerneldoc for intel_device_info_runtime_init

CC [M] drivers/gpu/drm/i915/intel_device_info.o
drivers/gpu/drm/i915/intel_device_info.c:727: warning: Function parameter or member 'dev_priv' not described in 'intel_device_info_runtime_init'
drivers/gpu/drm/i915/intel_device_info.c:727: warning: Excess function parameter 'info' description in 'intel_device_info_runtime_init'

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190105014652.3472-1-chris@chris-wilson.co.uk

Merge tag 'kbuild-v4.21-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

- improve boolinit.cocci and use_after_iter.cocci semantic patches

- fix alignment for kallsyms

- move 'asm goto' compiler test to Kconfig and clean up jump_label
   CONFIG option

- generate asm-generic wrappers automatically if arch does not
   implement mandatory UAPI headers

- remove redundant generic-y defines

- misc cleanups

* tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: rename generated .*conf-cfg to *conf-cfg
  kbuild: remove unnecessary stubs for archheader and archscripts
  kbuild: use assignment instead of define ... endef for filechk_* rules
  arch: remove redundant UAPI generic-y defines
  kbuild: generate asm-generic wrappers if mandatory headers are missing
  arch: remove stale comments "UAPI Header export list"
  riscv: remove redundant kernel-space generic-y
  kbuild: change filechk to surround the given command with { }
  kbuild: remove redundant target cleaning on failure
  kbuild: clean up rule_dtc_dt_yaml
  kbuild: remove UIMAGE_IN and UIMAGE_OUT
  jump_label: move 'asm goto' support test to Kconfig
  kallsyms: lower alignment on ARM
  scripts: coccinelle: boolinit: drop warnings on named constants
  scripts: coccinelle: check for redeclaration
  kconfig: remove unused "file" field of yylval union
  nds32: remove redundant kernel-space generic-y
  nios2: remove unneeded HAS_DMA define

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf tooling updates form Ingo Molnar:
"A final batch of perf tooling changes: mostly fixes and small
  improvements"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  perf session: Add comment for perf_session__register_idle_thread()
  perf thread-stack: Fix thread stack processing for the idle task
  perf thread-stack: Allocate an array of thread stacks
  perf thread-stack: Factor out thread_stack__init()
  perf thread-stack: Allow for a thread stack array
  perf thread-stack: Avoid direct reference to the thread's stack
  perf thread-stack: Tidy thread_stack__bottom() usage
  perf thread-stack: Simplify some code in thread_stack__process()
  tools gpio: Allow overriding CFLAGS
  tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command
  tools thermal tmon: Allow overriding CFLAGS assignments
  tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command
  perf c2c: Increase the HITM ratio limit for displayed cachelines
  perf c2c: Change the default coalesce setup
  perf trace beauty ioctl: Beautify USBDEVFS_ commands
  perf trace beauty: Export function to get the files for a thread
  perf trace: Wire up ioctl's USBDEBFS_ cmd table generator
  perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands
  tools headers uapi: Grab a copy of usbdevice_fs.h
  perf trace: Store the major number for a file when storing its pathname
  ...

Change mincore() to count "mapped" pages rather than "cached" pages

The semantics of what "in core" means for the mincore() system call are
somewhat unclear, but Linux has always (since 2.3.52, which is when
mincore() was initially done) treated it as "page is available in page
cache" rather than "page is mapped in the mapping".

The problem with that traditional semantic is that it exposes a lot of
system cache state that it really probably shouldn't, and that users
shouldn't really even care about.

So let's try to avoid that information leak by simply changing the
semantics to be that mincore() counts actual mapped pages, not pages
that might be cheaply mapped if they were faulted (note the "might be"
part of the old semantics: being in the cache doesn't actually guarantee
that you can access them without IO anyway, since things like network
filesystems may have to revalidate the cache before use).

In many ways the old semantics were somewhat insane even aside from the
information leak issue.  From the very beginning (and that beginning is
a long time ago: 2.3.52 was released in March 2000, I think), the code
had a comment saying

  Later we can get more picky about what "in core" means precisely.

and this is that "later".  Admittedly it is much later than is really
comfortable.

NOTE! This is a real semantic change, and it is for example known to
change the output of "fincore", since that program literally does a
mmmap without populating it, and then doing "mincore()" on that mapping
that doesn't actually have any pages in it.

I'm hoping that nobody actually has any workflow that cares, and the
info leak is real.

We may have to do something different if it turns out that people have
valid reasons to want the old semantics, and if we can limit the
information leak sanely.

Cc: Kevin Easton <kevin@guarana.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Masatake YAMATO <yamato@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix 'acccess_ok()' on alpha and SH

Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")
broke both alpha and SH booting in qemu, as noticed by Guenter Roeck.

It turns out that the bug wasn't actually in that commit itself (which
would have been surprising: it was mostly a no-op), but in how the
addition of access_ok() to the strncpy_from_user() and strnlen_user()
functions now triggered the case where those functions would test the
access of the very last byte of the user address space.

The string functions actually did that user range test before too, but
they did it manually by just comparing against user_addr_max().  But
with user_access_begin() doing the check (using "access_ok()"), it now
exposed problems in the architecture implementations of that function.

For example, on alpha, the access_ok() helper macro looked like this:

  #define __access_ok(addr, size) \
        ((get_fs().seg & (addr | size | (addr+size))) == 0)

and what it basically tests is of any of the high bits get set (the
USER_DS masking value is 0xfffffc0000000000).

And that's completely wrong for the "addr+size" check.  Because it's
off-by-one for the case where we check to the very end of the user
address space, which is exactly what the strn*_user() functions do.

Why? Because "addr+size" will be exactly the size of the address space,
so trying to access the last byte of the user address space will fail
the __access_ok() check, even though it shouldn't.  As a result, the
user string accessor functions failed consistently - because they
literally don't know how long the string is going to be, and the max
access is going to be that last byte of the user address space.

Side note: that alpha macro is buggy for another reason too - it re-uses
the arguments twice.

And SH has another version of almost the exact same bug:

  #define __addr_ok(addr) \
        ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)

so far so good: yes, a user address must be below the limit.  But then:

  #define __access_ok(addr, size)         \
        (__addr_ok((addr) + (size)))

is wrong with the exact same off-by-one case: the case when "addr+size"
is exactly _equal_ to the limit is actually perfectly fine (think "one
byte access at the last address of the user address space")

The SH version is actually seriously buggy in another way: it doesn't
actually check for overflow, even though it did copy the _comment_ that
talks about overflow.

So it turns out that both SH and alpha actually have completely buggy
implementations of access_ok(), but they happened to work in practice
(although the SH overflow one is a serious serious security bug, not
that anybody likely cares about SH security).

This fixes the problems by using a similar macro on both alpha and SH.
It isn't trying to be clever, the end address is based on this logic:

        unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;

which basically says "add start and length, and then subtract one unless
the length was zero".  We can't subtract one for a zero length, or we'd
just hit an underflow instead.

For a lot of access_ok() users the length is a constant, so this isn't
actually as expensive as it initially looks.

Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'fscrypt_for_linus' of git://git./linux/kernel/git/tytso/fscrypt

Pull fscrypt updates from Ted Ts'o:
"Add Adiantum support for fscrypt"

* tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: add Adiantum support

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bug fixes from Ted Ts'o:
"Fix a number of ext4 bugs"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix special inode number checks in __ext4_iget()
  ext4: track writeback errors using the generic tracking infrastructure
  ext4: use ext4_write_inode() when fsyncing w/o a journal
  ext4: avoid kernel warning when writing the superblock to a dead device
  ext4: fix a potential fiemap/page fault deadlock w/ inline_data
  ext4: make sure enough credits are reserved for dioread_nolock writes

Merge tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fixes from Christoph Hellwig:
"Fix various regressions introduced in this cycles:

   - fix dma-debug tracking for the map_page / map_single
     consolidatation

   - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid
     link failures

   - fix AMD Gart direct mappings

   - setup the dma address for no kernel mappings using the remap
     allocator"

* tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations
  x86/amd_gart: fix unmapping of non-GART mappings
  dma-mapping: remove a few unused exports
  dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA
  dma-mapping: remove dmam_{declare,release}_coherent_memory
  dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs
  dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs

Merge tag 'tag-chrome-platform-for-v4.21' of git://git./linux/kernel/git/bleung/chrome-platform

Pull chrome platform updates from Benson Leung:

- Changes for EC_MKBP_EVENT_SENSOR_FIFO handling.

- Also, maintainership changes. Olofj out, Enric balletbo in.

* tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
  MAINTAINERS: add maintainers for ChromeOS EC sub-drivers
  MAINTAINERS: platform/chrome: Add Enric as a maintainer
  MAINTAINERS: platform/chrome: remove myself as maintainer
  platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup
  platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes

Merge tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc

Pull hwspinlock updates from Bjorn Andersson:
"This adds support for the hardware semaphores found in STM32MP1"

* tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc:
  hwspinlock: fix return value check in stm32_hwspinlock_probe()
  hwspinlock: add STM32 hwspinlock device
  dt-bindings: hwlock: Document STM32 hwspinlock bindings

fscrypt: add Adiantum support

Add support for the Adiantum encryption mode to fscrypt.  Adiantum is a
tweakable, length-preserving encryption mode with security provably
reducible to that of XChaCha12 and AES-256, subject to a security bound.
It's also a true wide-block mode, unlike XTS.  See the paper
"Adiantum: length-preserving encryption for entry-level processors"
(https://eprint.iacr.org/2018/720.pdf) for more details.  Also see
commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support").

On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and
the NH hash function.  These algorithms are fast even on processors
without dedicated crypto instructions.  Adiantum makes it feasible to
enable storage encryption on low-end mobile devices that lack AES
instructions; currently such devices are unencrypted.  On ARM Cortex-A7,
on 4096-byte messages Adiantum encryption is about 4 times faster than
AES-256-XTS encryption; decryption is about 5 times faster.

In fscrypt, Adiantum is suitable for encrypting both file contents and
names.  With filenames, it fixes a known weakness: when two filenames in
a directory share a common prefix of >= 16 bytes, with CTS-CBC their
encrypted filenames share a common prefix too, leaking information.
Adiantum does not have this problem.

Since Adiantum also accepts long tweaks (IVs), it's also safe to use the
master key directly for Adiantum encryption rather than deriving
per-file keys, provided that the per-file nonce is included in the IVs
and the master key isn't used for any other encryption mode.  This
configuration saves memory and improves performance.  A new fscrypt
policy flag is added to allow users to opt-in to this configuration.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>