Jo-Philipp Wich [Wed, 15 Jun 2011 13:51:57 +0000 (13:51 +0000)]
revert r26997, it does not apply against 2.6.36.4
SVN-Revision: 27178
Florian Fainelli [Tue, 14 Jun 2011 20:05:13 +0000 (20:05 +0000)]
switch to 2.6.39
SVN-Revision: 27175
Florian Fainelli [Tue, 14 Jun 2011 20:05:09 +0000 (20:05 +0000)]
fix diag.sh with qube2 front led
SVN-Revision: 27174
Florian Fainelli [Tue, 14 Jun 2011 20:05:03 +0000 (20:05 +0000)]
resync kernel config
SVN-Revision: 27173
John Crispin [Mon, 13 Jun 2011 22:37:23 +0000 (22:37 +0000)]
Fix for bug where the iniatialisation of the MAC data private strucure
is copied into the wrong location.
Ticket #9547
Signed-off-by: Conor O'Gorman <conor at dna.ie>
SVN-Revision: 27172
Mirko Vogt [Mon, 13 Jun 2011 13:16:11 +0000 (13:16 +0000)]
link hotplug2 against libbsd when eglibc is used
SVN-Revision: 27170
Mirko Vogt [Mon, 13 Jun 2011 13:16:08 +0000 (13:16 +0000)]
add library 'libbsd'
This library contains core functionality usually (but obviously not always)
provided by libc implementations which isneeded by OpenWrt core packages.
For instance the functions 'strlcat', 'strlcpy' are not implemented in
eglibc but needed by hotplug2 (udevtrigger)
SVN-Revision: 27169
Florian Fainelli [Mon, 13 Jun 2011 12:45:12 +0000 (12:45 +0000)]
replace unfortify patch with a better one
Thanks to Richard Weinberger for providing this patch
SVN-Revision: 27168
Gabor Juhos [Mon, 13 Jun 2011 08:12:41 +0000 (08:12 +0000)]
tools/firmware-utils: fix buffalo csum calculation
Also print an error message if decryption fails.
SVN-Revision: 27167
Gabor Juhos [Mon, 13 Jun 2011 08:12:40 +0000 (08:12 +0000)]
ar71xx: use ar933x_uart.h in the AR933X serial driver
SVN-Revision: 27166
Gabor Juhos [Mon, 13 Jun 2011 08:12:38 +0000 (08:12 +0000)]
ar71xx: update early_printk code
SVN-Revision: 27165
Jo-Philipp Wich [Sun, 12 Jun 2011 19:27:21 +0000 (19:27 +0000)]
6to4: advertise effective tunnel mtu in RAs
SVN-Revision: 27163
Florian Fainelli [Sun, 12 Jun 2011 19:17:57 +0000 (19:17 +0000)]
cleanup files using checkpatch.pl
SVN-Revision: 27162
Jo-Philipp Wich [Sun, 12 Jun 2011 18:59:40 +0000 (18:59 +0000)]
6to4: don't start if detected local IPv4 address is RFC1918, allows people to deploy firmwares with 6to4 enabled by default
SVN-Revision: 27160
Felix Fietkau [Sun, 12 Jun 2011 14:07:08 +0000 (14:07 +0000)]
ppp: remove -ffunction-sections, -fdata-sections and -Wl,--gc-sections, it can cause functions needed by plugins to disappear (fixes #9462)
SVN-Revision: 27159
John Crispin [Sun, 12 Jun 2011 08:56:26 +0000 (08:56 +0000)]
* move patches around * add basic support for gigaset sx76x
SVN-Revision: 27158
Felix Fietkau [Sat, 11 Jun 2011 13:25:00 +0000 (13:25 +0000)]
toolchain/gdb: fix compile for powerpc targets, refresh patch
SVN-Revision: 27155
Vasilis Tsiligiannis [Thu, 9 Jun 2011 19:30:50 +0000 (19:30 +0000)]
Remove trailing spaces, convert spaces to tabs
SVN-Revision: 27153
Jo-Philipp Wich [Thu, 9 Jun 2011 14:36:01 +0000 (14:36 +0000)]
kernel: revert unrelated change in previous commit
SVN-Revision: 27150
Jo-Philipp Wich [Thu, 9 Jun 2011 14:34:53 +0000 (14:34 +0000)]
kernel: gre depends on ipv6 is Kernel is built with IPv6 support
SVN-Revision: 27149
Jo-Philipp Wich [Thu, 9 Jun 2011 12:36:30 +0000 (12:36 +0000)]
base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
SVN-Revision: 27147
Jo-Philipp Wich [Thu, 9 Jun 2011 12:25:48 +0000 (12:25 +0000)]
base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
SVN-Revision: 27145
John Crispin [Thu, 9 Jun 2011 07:08:54 +0000 (07:08 +0000)]
we dont need 1024 bytes buffer. 128 bytes is enough.
SVN-Revision: 27143
John Crispin [Thu, 9 Jun 2011 05:10:18 +0000 (05:10 +0000)]
* revert accidental config change
SVN-Revision: 27142
Mirko Vogt [Wed, 8 Jun 2011 20:45:19 +0000 (20:45 +0000)]
Revert "[package/block-mount] remove example config file"
This isn't needed anymore due to commit 27138
SVN-Revision: 27139
Jo-Philipp Wich [Wed, 8 Jun 2011 19:38:25 +0000 (19:38 +0000)]
make sure that base-files is installed last, this allows per-target base-file overlays to work correctly
SVN-Revision: 27138
John Crispin [Wed, 8 Jun 2011 17:57:55 +0000 (17:57 +0000)]
* fixes spi flash for ar9
* adds limited support for netgear dgn3500 (enough for others to start working with)
SVN-Revision: 27137
Mirko Vogt [Wed, 8 Jun 2011 17:39:16 +0000 (17:39 +0000)]
remove example config file
Having this file prevents the possibility of having target-specific
fstab config files (as target/linux/${target}/base-files/etc/config/fstab).
There is no need of a non-working example file on the target anyway.
SVN-Revision: 27136
Jo-Philipp Wich [Tue, 7 Jun 2011 23:25:43 +0000 (23:25 +0000)]
base-files: fix error reporting for unsupported protocols on virtual interfaces
SVN-Revision: 27132
Jo-Philipp Wich [Tue, 7 Jun 2011 21:54:14 +0000 (21:54 +0000)]
uClibc: fix a crash in __read_etc_hosts_r() that occurs if more than five hostnames follow a dotted quad in /etc/hosts
SVN-Revision: 27131
Felix Fietkau [Tue, 7 Jun 2011 17:07:10 +0000 (17:07 +0000)]
ar71xx: override inittab to enable login on ttyATH0
SVN-Revision: 27128
Felix Fietkau [Tue, 7 Jun 2011 17:00:43 +0000 (17:00 +0000)]
base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
SVN-Revision: 27127
Hauke Mehrtens [Tue, 7 Jun 2011 15:39:12 +0000 (15:39 +0000)]
kernel: fix description of kmod-pata-cs5535 and kmod-pata-cs5536
SVN-Revision: 27126
Hauke Mehrtens [Tue, 7 Jun 2011 15:36:49 +0000 (15:36 +0000)]
kernel: fix call of kmod-pata-cs5535 and kmod-pata-cs5536
SVN-Revision: 27125
Mirko Vogt [Tue, 7 Jun 2011 08:37:25 +0000 (08:37 +0000)]
remove empty file (patch went upstream and file didn't get deleted but only cleared)
SVN-Revision: 27122
Mirko Vogt [Tue, 7 Jun 2011 00:13:56 +0000 (00:13 +0000)]
upgrade Linaro GCC to 4.5-2011.05-0 - thanks to Mark Mentovai
SVN-Revision: 27118
Mirko Vogt [Mon, 6 Jun 2011 22:27:04 +0000 (22:27 +0000)]
require mppe 128bit-encryption by default
SVN-Revision: 27117
Florian Fainelli [Sat, 4 Jun 2011 18:27:14 +0000 (18:27 +0000)]
update to 2.6.39.1
SVN-Revision: 27114
Florian Fainelli [Sat, 4 Jun 2011 18:27:09 +0000 (18:27 +0000)]
define UIMAGE for various rootfs targets
SVN-Revision: 27113
Florian Fainelli [Sat, 4 Jun 2011 18:27:04 +0000 (18:27 +0000)]
use IMG_PREFIX for image name
SVN-Revision: 27112
Florian Fainelli [Sat, 4 Jun 2011 18:27:00 +0000 (18:27 +0000)]
add more config symbols to 2.6.39
SVN-Revision: 27111
Florian Fainelli [Sat, 4 Jun 2011 18:26:54 +0000 (18:26 +0000)]
update to 2.6.39.1
SVN-Revision: 27110
Jo-Philipp Wich [Sat, 4 Jun 2011 14:33:35 +0000 (14:33 +0000)]
grub: improve package requirement error, patch by Jim Cromie <jim.cromie@gmail.com>
SVN-Revision: 27109
Florian Fainelli [Sat, 4 Jun 2011 13:36:09 +0000 (13:36 +0000)]
update to 2.6.39.1
SVN-Revision: 27107
Florian Fainelli [Sat, 4 Jun 2011 13:36:05 +0000 (13:36 +0000)]
update to 2.6.39.1
SVN-Revision: 27106
Florian Fainelli [Sat, 4 Jun 2011 13:36:00 +0000 (13:36 +0000)]
add some missing 2.6.39 config symbols
SVN-Revision: 27105
Florian Fainelli [Sat, 4 Jun 2011 13:35:55 +0000 (13:35 +0000)]
update to 2.6.39.1
patch from Peter Wagner
SVN-Revision: 27104
Florian Fainelli [Sat, 4 Jun 2011 13:35:48 +0000 (13:35 +0000)]
compcache does not build on 2.6.38+
SVN-Revision: 27103
Gabor Juhos [Sat, 4 Jun 2011 12:30:10 +0000 (12:30 +0000)]
ar71xx: setup wdt_clock for AR913X to avoid a kernel bug
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27102
Gabor Juhos [Sat, 4 Jun 2011 12:30:09 +0000 (12:30 +0000)]
ar71xx: select the internal antenna by default on the ZCN-1523H boards
SVN-Revision: 27101
Hauke Mehrtens [Sat, 4 Jun 2011 09:33:02 +0000 (09:33 +0000)]
acx-mac80211: remove patch
This patch is already incorporated into the original source code.
closes #9499
SVN-Revision: 27100
Florian Fainelli [Thu, 2 Jun 2011 14:38:01 +0000 (14:38 +0000)]
soloscli: fix new lines in soloscli
If the string received from the ADSL firmware is missing \n, add it in.
Signed-off-by: Nathan Williams <nathan@traverse.com.au>
SVN-Revision: 27096
Florian Fainelli [Thu, 2 Jun 2011 14:37:56 +0000 (14:37 +0000)]
acx-mac80211: add io endianness patch
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 27095
Florian Fainelli [Thu, 2 Jun 2011 13:45:20 +0000 (13:45 +0000)]
update to 2.6.39
SVN-Revision: 27090
Felix Fietkau [Wed, 1 Jun 2011 18:15:43 +0000 (18:15 +0000)]
Revert "ar71xx: only enable the rx engine after the link is up..."
It messes up the DMA state when the link goes down
SVN-Revision: 27088
Felix Fietkau [Wed, 1 Jun 2011 18:08:17 +0000 (18:08 +0000)]
kernel.mk: add a new helper for comparing kernel versions, which can take 1 - 4 field kernel versions
implement CompareKernelPatchVer using this new helper
implement kernel_patchver_{gt,ge,eq,le,lt}, which are more convenient for use with inline $(if)
SVN-Revision: 27087
Felix Fietkau [Wed, 1 Jun 2011 18:08:12 +0000 (18:08 +0000)]
netfilter.mk: remove a few obsolete CompareKernelPatchVer calls
SVN-Revision: 27086
Gabor Juhos [Wed, 1 Jun 2011 13:12:31 +0000 (13:12 +0000)]
mac80211: add initial support for AR9330
SVN-Revision: 27084
Gabor Juhos [Wed, 1 Jun 2011 13:12:30 +0000 (13:12 +0000)]
ar71xx: init external_reset for AR933X
SVN-Revision: 27083
Gabor Juhos [Wed, 1 Jun 2011 13:12:28 +0000 (13:12 +0000)]
ar71xx: add external_reset field to ath9k_platform_data
SVN-Revision: 27082
Gabor Juhos [Wed, 1 Jun 2011 13:12:27 +0000 (13:12 +0000)]
ar71xx: init get_mac_revision on AR9330 rev 1
SVN-Revision: 27081
Gabor Juhos [Wed, 1 Jun 2011 13:12:26 +0000 (13:12 +0000)]
ar71xx: add get_mac_revision to ath9k_platform_data
SVN-Revision: 27080
Gabor Juhos [Wed, 1 Jun 2011 13:12:24 +0000 (13:12 +0000)]
ar71xx: export SoC revision
SVN-Revision: 27079
Imre Kaloz [Wed, 1 Jun 2011 07:24:41 +0000 (07:24 +0000)]
refresh patches
SVN-Revision: 27078
Imre Kaloz [Wed, 1 Jun 2011 07:21:25 +0000 (07:21 +0000)]
fixup second led, patch from Chris
SVN-Revision: 27077
Felix Fietkau [Wed, 1 Jun 2011 02:23:30 +0000 (02:23 +0000)]
ar71xx: add profile and image building code for wzr-hp-ag300h
SVN-Revision: 27076
Felix Fietkau [Wed, 1 Jun 2011 02:23:26 +0000 (02:23 +0000)]
ar71xx: add kernel support for the buffalo wzr-hp-ag300h
SVN-Revision: 27075
Felix Fietkau [Wed, 1 Jun 2011 02:23:22 +0000 (02:23 +0000)]
fix a crash in mtd_concat when the .sync op is not implemented
SVN-Revision: 27074
Felix Fietkau [Wed, 1 Jun 2011 02:23:18 +0000 (02:23 +0000)]
m25p80: add the chip id for the winbond w25q128 chip
SVN-Revision: 27073
Imre Kaloz [Tue, 31 May 2011 23:55:33 +0000 (23:55 +0000)]
fixup pcie clock, thanks Chris
SVN-Revision: 27072
Felix Fietkau [Tue, 31 May 2011 23:07:29 +0000 (23:07 +0000)]
mac80211: update to wireless-testing 2011-05-27
SVN-Revision: 27071
Gabor Juhos [Tue, 31 May 2011 22:53:47 +0000 (22:53 +0000)]
ar71xx: build images for the AP121 boards
SVN-Revision: 27070
Gabor Juhos [Tue, 31 May 2011 22:53:45 +0000 (22:53 +0000)]
ar71xx: add sysupgrade support for the AP121 boards
SVN-Revision: 27069
Gabor Juhos [Tue, 31 May 2011 22:53:44 +0000 (22:53 +0000)]
ar71xx: add default network config for the AP121 boards
SVN-Revision: 27068
Gabor Juhos [Tue, 31 May 2011 22:53:43 +0000 (22:53 +0000)]
ar71xx: add support for the AP121/AP121-MINI reference boards
SVN-Revision: 27067
Gabor Juhos [Tue, 31 May 2011 22:53:42 +0000 (22:53 +0000)]
ar71xx: register UART for the AR933X SoCs
SVN-Revision: 27066
Gabor Juhos [Tue, 31 May 2011 22:53:40 +0000 (22:53 +0000)]
ar71xx: add serial driver for the AR933X UART
SVN-Revision: 27065
Gabor Juhos [Tue, 31 May 2011 22:53:39 +0000 (22:53 +0000)]
ar71xx: add WMAC initialization code for the AR933X SoCs
SVN-Revision: 27064
Gabor Juhos [Tue, 31 May 2011 22:53:37 +0000 (22:53 +0000)]
ar71xx: add ethernet initialization for the AR933X SoCs
SVN-Revision: 27063
Gabor Juhos [Tue, 31 May 2011 22:53:36 +0000 (22:53 +0000)]
ar71xx: enable USB support for the AR933x SoCs
SVN-Revision: 27062
Gabor Juhos [Tue, 31 May 2011 22:53:35 +0000 (22:53 +0000)]
ar71xx: add AR933x specific glue for ar71xx_device{start,stop}
SVN-Revision: 27061
Gabor Juhos [Tue, 31 May 2011 22:53:34 +0000 (22:53 +0000)]
ar71xx: the watchdog uses the reference clock on the AR933x SoCs
SVN-Revision: 27060
Gabor Juhos [Tue, 31 May 2011 22:53:32 +0000 (22:53 +0000)]
ar71xx: add AR933x specific glue code for IRQ initialization
SVN-Revision: 27059
Gabor Juhos [Tue, 31 May 2011 22:53:31 +0000 (22:53 +0000)]
ar71xx: don't register 8250 UART on the AR933x SoCs
SVN-Revision: 27058
Gabor Juhos [Tue, 31 May 2011 22:53:30 +0000 (22:53 +0000)]
ar71xx: enable GPIO support for the AR933x SoCs
SVN-Revision: 27057
Gabor Juhos [Tue, 31 May 2011 22:53:29 +0000 (22:53 +0000)]
ar71xx: add AR933x specific frequency initialization code
SVN-Revision: 27056
Gabor Juhos [Tue, 31 May 2011 22:53:27 +0000 (22:53 +0000)]
ar71xx: add AR933x specific early_printk support
SVN-Revision: 27055
Gabor Juhos [Tue, 31 May 2011 22:53:26 +0000 (22:53 +0000)]
ar71xx: add preliminary support for the Atheros AR933x SoCs
SVN-Revision: 27054
Gabor Juhos [Tue, 31 May 2011 22:53:25 +0000 (22:53 +0000)]
ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2
NETGEAR doesn
\92t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use
29763654+16+64 as their hd_id value.
This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.
There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 27053
Gabor Juhos [Tue, 31 May 2011 22:53:24 +0000 (22:53 +0000)]
tools/firmware-utils: add support for hd_id tag into mkdniimg
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 27052
Gabor Juhos [Tue, 31 May 2011 22:53:22 +0000 (22:53 +0000)]
ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards
SVN-Revision: 27051
Gabor Juhos [Tue, 31 May 2011 22:53:21 +0000 (22:53 +0000)]
tools/firmware-utils: add buffalo specific fw tools
SVN-Revision: 27050
Gabor Juhos [Tue, 31 May 2011 22:53:20 +0000 (22:53 +0000)]
ar71xx: Fix header offset for newer WRT160NL models
Newer WRT160NLs have a flash chip with 4K erase blocks instead of 64K,
resulting in miscalculated partition sizes.
Since the actual sizes did not change, hardcode them to their current
sizes, and make sure they are at least one erase block big (in case Cisco
decides to start to use chips with 128K erase blocks).
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 27049
Gabor Juhos [Tue, 31 May 2011 22:53:19 +0000 (22:53 +0000)]
ar71xx: add SOC_AR{71XX,724X,913X,934X} config symbols
SVN-Revision: 27048
Gabor Juhos [Tue, 31 May 2011 22:53:18 +0000 (22:53 +0000)]
ar71xx: reduce the size of the squashfs-4k binaries
SVN-Revision: 27047
Gabor Juhos [Tue, 31 May 2011 22:53:16 +0000 (22:53 +0000)]
mac80211: make ath9k available even if PCI support is disabled
SVN-Revision: 27046
Gabor Juhos [Tue, 31 May 2011 22:53:15 +0000 (22:53 +0000)]
ar71xx: initialize is_clk_25mhz field for AR9340 WMAC
SVN-Revision: 27045
Gabor Juhos [Tue, 31 May 2011 22:53:14 +0000 (22:53 +0000)]
ar71xx: sync ath9k_platform_data.h with compat-wireless
SVN-Revision: 27044
Gabor Juhos [Tue, 31 May 2011 22:53:13 +0000 (22:53 +0000)]
ar71xx: use the diag LED for diagnostic on the WZR-HP-G30XNH boards
SVN-Revision: 27043
Gabor Juhos [Tue, 31 May 2011 22:53:12 +0000 (22:53 +0000)]
ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
SVN-Revision: 27042
projects / openwrt / staging / xback.git / log