openwrt/staging/linusw.git
9 years agodnsmasq: backport some dnssec fixes
Steven Barth [Mon, 22 Dec 2014 09:51:22 +0000 (09:51 +0000)]
dnsmasq: backport some dnssec fixes

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43758

9 years agokernel: disable soft-reset for generic PHY devices to avoid accidentally clearing...
Felix Fietkau [Sat, 20 Dec 2014 15:26:38 +0000 (15:26 +0000)]
kernel: disable soft-reset for generic PHY devices to avoid accidentally clearing preinitialized state

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43757

9 years agobuffalo-enc: pass the longstate option to decryption
Felix Fietkau [Sat, 20 Dec 2014 15:26:31 +0000 (15:26 +0000)]
buffalo-enc: pass the longstate option to decryption

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43756

9 years agobuffalo-enc: accept the longstate command line option
Felix Fietkau [Sat, 20 Dec 2014 15:26:25 +0000 (15:26 +0000)]
buffalo-enc: accept the longstate command line option

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43755

9 years agobcm53xx: support WAN connected to switch port 0
Rafał Miłecki [Sat, 20 Dec 2014 15:09:01 +0000 (15:09 +0000)]
bcm53xx: support WAN connected to switch port 0

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43754

9 years agomvsw6171: note support for 88E6172 switches
Luka Perkov [Fri, 19 Dec 2014 22:02:59 +0000 (22:02 +0000)]
mvsw6171: note support for 88E6172 switches

The '6171 and '6172 are similar enough to work
without any changes to the code.

Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43753

9 years agokirkwood: add *plugs to uci-defaults
Luka Perkov [Fri, 19 Dec 2014 11:05:13 +0000 (11:05 +0000)]
kirkwood: add *plugs to uci-defaults

Set defaults health led to a timer heartbeet (200/800)
and populate network for:

- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA

Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43752

9 years agokikwood: populate kirkwood.sh with new boards
Luka Perkov [Thu, 18 Dec 2014 18:38:43 +0000 (18:38 +0000)]
kikwood: populate kirkwood.sh with new boards

- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43751

9 years agokirkwood: set default EA4500 switch config
Luka Perkov [Thu, 18 Dec 2014 18:38:38 +0000 (18:38 +0000)]
kirkwood: set default EA4500 switch config

This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43750

9 years agokernel: bgmac: fix some problems
Hauke Mehrtens [Thu, 18 Dec 2014 16:25:22 +0000 (16:25 +0000)]
kernel: bgmac: fix some problems

There are some problems in the napi usage that are fixed now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43749

9 years agobcm53xx: PCIe: add link check again
Hauke Mehrtens [Thu, 18 Dec 2014 16:23:42 +0000 (16:23 +0000)]
bcm53xx: PCIe: add link check again

When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43748

9 years agouboot-envtools: add more kirkwood boards
Luka Perkov [Thu, 18 Dec 2014 15:53:46 +0000 (15:53 +0000)]
uboot-envtools: add more kirkwood boards

- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus

Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43747

9 years agoar7: remove leftover 3.10 patches
Felix Fietkau [Thu, 18 Dec 2014 11:57:42 +0000 (11:57 +0000)]
ar7: remove leftover 3.10 patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43746

9 years agobinutils: break-out libbfd, libopcodes and ar
Felix Fietkau [Thu, 18 Dec 2014 11:57:36 +0000 (11:57 +0000)]
binutils: break-out libbfd, libopcodes and ar

Package libbfd, libopcodes and ar seperately.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43745

9 years agoar71xx: add support for qca956x soc
Felix Fietkau [Thu, 18 Dec 2014 11:28:53 +0000 (11:28 +0000)]
ar71xx: add support for qca956x soc

This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.

tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43744

9 years agoar8216: Inline function ar8xxx_create_mii
Felix Fietkau [Thu, 18 Dec 2014 11:28:47 +0000 (11:28 +0000)]
ar8216: Inline function ar8xxx_create_mii

Inline function ar8xxx_create_mii.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43743

9 years agoar8216: Remove read/write/rmw member functions from ar8xxx_priv
Felix Fietkau [Thu, 18 Dec 2014 11:28:39 +0000 (11:28 +0000)]
ar8216: Remove read/write/rmw member functions from ar8xxx_priv

Remove read/write/rmw member functions from ar8xxx_priv

There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43742

9 years agoar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
Felix Fietkau [Thu, 18 Dec 2014 11:28:34 +0000 (11:28 +0000)]
ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops

Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43741

9 years agoar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
Felix Fietkau [Thu, 18 Dec 2014 11:28:28 +0000 (11:28 +0000)]
ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch

Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43740

9 years agoar8216: remove unused function parameter in ar8327_led_register
Felix Fietkau [Thu, 18 Dec 2014 11:28:20 +0000 (11:28 +0000)]
ar8216: remove unused function parameter in ar8327_led_register

Remove unused function parameter in ar8327_led_register.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43739

9 years agobcm53xx: backport spi-nor changes and update bcm53xxspiflash
Rafał Miłecki [Wed, 17 Dec 2014 14:53:25 +0000 (14:53 +0000)]
bcm53xx: backport spi-nor changes and update bcm53xxspiflash

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738

9 years agokernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation ...
Felix Fietkau [Wed, 17 Dec 2014 12:27:14 +0000 (12:27 +0000)]
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43736

9 years agokirkwood: add sheevaplug and derivatives
Luka Perkov [Wed, 17 Dec 2014 08:33:55 +0000 (08:33 +0000)]
kirkwood: add sheevaplug and derivatives

Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2

Signed-off-by: Gérald Kerma <drEagle@doukki.net>
SVN-Revision: 43735

9 years agoBelkin AC 1750 DB (F9K1115v2) support
Imre Kaloz [Wed, 17 Dec 2014 08:27:38 +0000 (08:27 +0000)]
Belkin AC 1750 DB (F9K1115v2) support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43734

9 years agodnsmasq: allow de-selecting features from -full variant.
Steven Barth [Wed, 17 Dec 2014 05:59:12 +0000 (05:59 +0000)]
dnsmasq: allow de-selecting features from -full variant.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43733

9 years agoiproute2: bump version from 3.16.0 to 3.17.0
Steven Barth [Tue, 16 Dec 2014 12:43:50 +0000 (12:43 +0000)]
iproute2: bump version from 3.16.0 to 3.17.0

Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43731

9 years agonftables: bump to release 0.4, cleanup our patches
Steven Barth [Tue, 16 Dec 2014 09:28:59 +0000 (09:28 +0000)]
nftables: bump to release 0.4, cleanup our patches

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43730

9 years agolibnftnl: bump to upstream release 1.0.3
Steven Barth [Tue, 16 Dec 2014 09:22:49 +0000 (09:22 +0000)]
libnftnl: bump to upstream release 1.0.3

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43729

9 years agocyassl: bump to 3.3.0
Steven Barth [Tue, 16 Dec 2014 09:16:00 +0000 (09:16 +0000)]
cyassl: bump to 3.3.0

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43728

9 years agobuild: prevent spurious host-build re-builds by touching .built after the install...
Felix Fietkau [Mon, 15 Dec 2014 20:14:27 +0000 (20:14 +0000)]
build: prevent spurious host-build re-builds by touching .built after the install command before touching .installed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43721

9 years agoralink: remove partitoon map from mt7621.dtsi
John Crispin [Mon, 15 Dec 2014 15:55:37 +0000 (15:55 +0000)]
ralink: remove partitoon map from mt7621.dtsi

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720

9 years agobcm53xx: sysupgrade support for devices with serial flash
Rafał Miłecki [Mon, 15 Dec 2014 15:43:46 +0000 (15:43 +0000)]
bcm53xx: sysupgrade support for devices with serial flash

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719

9 years agobrcm47xx: extract magics from specific upgrade images (and still reject them)
Rafał Miłecki [Mon, 15 Dec 2014 11:09:14 +0000 (11:09 +0000)]
brcm47xx: extract magics from specific upgrade images (and still reject them)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43718

9 years agofstools: update to latest git HEAD
John Crispin [Mon, 15 Dec 2014 10:37:14 +0000 (10:37 +0000)]
fstools: update to latest git HEAD

adds a few cleanups and extroot/ubi support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43717

9 years agouboot-envtools: enable UBI support per default on oxnas
John Crispin [Mon, 15 Dec 2014 10:37:09 +0000 (10:37 +0000)]
uboot-envtools: enable UBI support per default on oxnas

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43716

9 years agoadd "preinit_regular" diag.sh set_state argument
John Crispin [Mon, 15 Dec 2014 10:37:00 +0000 (10:37 +0000)]
add "preinit_regular" diag.sh set_state argument

This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715

9 years agobrcm47xx: detect (and still reject for now) CyberTAN fw format
Rafał Miłecki [Mon, 15 Dec 2014 09:59:44 +0000 (09:59 +0000)]
brcm47xx: detect (and still reject for now) CyberTAN fw format

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43714

9 years agoprocd: update to latest git HEAD
John Crispin [Mon, 15 Dec 2014 09:44:01 +0000 (09:44 +0000)]
procd: update to latest git HEAD

fixes a bug where wdt write happened with no valid fd available
--> procd: WDT failed to write: Bad file descriptor

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43711

9 years agonftables: mini-bump and patch cleanup
Steven Barth [Mon, 15 Dec 2014 09:41:47 +0000 (09:41 +0000)]
nftables: mini-bump and patch cleanup

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43710

9 years agoramips: update mtd patches to apply after changes from r43700
Rafał Miłecki [Mon, 15 Dec 2014 09:10:43 +0000 (09:10 +0000)]
ramips: update mtd patches to apply after changes from r43700

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709

9 years agobrcm47xx: use separated function in upgrade to detect file type
Rafał Miłecki [Mon, 15 Dec 2014 08:51:14 +0000 (08:51 +0000)]
brcm47xx: use separated function in upgrade to detect file type

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43708

9 years agonftables: bump to latest git, fix mini-gmp patches
Steven Barth [Sun, 14 Dec 2014 16:03:45 +0000 (16:03 +0000)]
nftables: bump to latest git, fix mini-gmp patches

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43707

9 years agolibnftnl: bump to latest git
Steven Barth [Sun, 14 Dec 2014 16:03:18 +0000 (16:03 +0000)]
libnftnl: bump to latest git

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43706

9 years agokirkwood: enable EA4500 switch on 3.18
John Crispin [Sun, 14 Dec 2014 08:57:58 +0000 (08:57 +0000)]
kirkwood: enable EA4500 switch on 3.18

Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43704

9 years agogemini: update usb driver and merge registers into one patch
John Crispin [Sun, 14 Dec 2014 08:57:52 +0000 (08:57 +0000)]
gemini: update usb driver and merge registers into one patch

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43703

9 years agogemini: merge register ethernet patches into one
John Crispin [Sun, 14 Dec 2014 08:57:43 +0000 (08:57 +0000)]
gemini: merge register ethernet patches into one

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43702

9 years agoralink: drop old pinmux nodes from dts files
John Crispin [Sun, 14 Dec 2014 08:57:16 +0000 (08:57 +0000)]
ralink: drop old pinmux nodes from dts files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701

9 years agokernel: warn users to use the new (dedicated) firmware splitter
Rafał Miłecki [Sun, 14 Dec 2014 00:35:03 +0000 (00:35 +0000)]
kernel: warn users to use the new (dedicated) firmware splitter

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43700

9 years agotoolchain: do not include libatomic.so in the libc package
Felix Fietkau [Sat, 13 Dec 2014 23:58:47 +0000 (23:58 +0000)]
toolchain: do not include libatomic.so in the libc package

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43699

9 years agonvram: remove libnvram.so, it is unused and incompatible to the broadcom API anyway
Felix Fietkau [Sat, 13 Dec 2014 23:58:35 +0000 (23:58 +0000)]
nvram: remove libnvram.so, it is unused and incompatible to the broadcom API anyway

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43698

9 years agokernel: move old firmware uimage splitter into separated patch
Rafał Miłecki [Sat, 13 Dec 2014 20:06:47 +0000 (20:06 +0000)]
kernel: move old firmware uimage splitter into separated patch

This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43696

9 years agoscripts/config: fix segfault introduced in r43652
Felix Fietkau [Sat, 13 Dec 2014 14:01:26 +0000 (14:01 +0000)]
scripts/config: fix segfault introduced in r43652

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43695

9 years agobuild: ensure tools are built before building the toolchain
Felix Fietkau [Sat, 13 Dec 2014 11:57:14 +0000 (11:57 +0000)]
build: ensure tools are built before building the toolchain

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43693

9 years agorealview: drop old kernel configs
Felix Fietkau [Sat, 13 Dec 2014 11:55:59 +0000 (11:55 +0000)]
realview: drop old kernel configs

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43692

9 years agoau1000: remove leftover 3.3 kernel config
Felix Fietkau [Sat, 13 Dec 2014 11:55:49 +0000 (11:55 +0000)]
au1000: remove leftover 3.3 kernel config

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43691

9 years agoau1000: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:55:41 +0000 (11:55 +0000)]
au1000: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43690

9 years agorb532: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:55:32 +0000 (11:55 +0000)]
rb532: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43689

9 years agoat91: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:55:24 +0000 (11:55 +0000)]
at91: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43688

9 years agobrcm2708: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:55:11 +0000 (11:55 +0000)]
brcm2708: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43687

9 years agoixp4xx: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:55:04 +0000 (11:55 +0000)]
ixp4xx: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43686

9 years agolantiq: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:54:57 +0000 (11:54 +0000)]
lantiq: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43685

9 years agompc85xx: remove linux 3.10 support
Felix Fietkau [Sat, 13 Dec 2014 11:54:49 +0000 (11:54 +0000)]
mpc85xx: remove linux 3.10 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43684

9 years agonetlogic: fix XLR network driver build
Florian Fainelli [Sat, 13 Dec 2014 08:08:30 +0000 (08:08 +0000)]
netlogic: fix XLR network driver build

Backport an upstream submission to fix xlr_net

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43682

9 years agoramips:Add support for Aigale Ai-BR100
John Crispin [Sat, 13 Dec 2014 08:07:03 +0000 (08:07 +0000)]
ramips:Add support for Aigale Ai-BR100

Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681

9 years agomxs: indention and whitespace fixes
John Crispin [Sat, 13 Dec 2014 08:06:22 +0000 (08:06 +0000)]
mxs: indention and whitespace fixes

Align this file with the style of most other modules.mk.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43680

9 years agoar71xx: add an extra check on board_name for ath10k firmware patchs
John Crispin [Sat, 13 Dec 2014 08:06:01 +0000 (08:06 +0000)]
ar71xx: add an extra check on board_name for ath10k firmware patchs

It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679

9 years agooxnas: fix gpio-fan on kd20
John Crispin [Sat, 13 Dec 2014 08:04:54 +0000 (08:04 +0000)]
oxnas: fix gpio-fan on kd20

define speed-map and include kmod-hwmon-gpiofan in kd20 profile

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43678

9 years agooxnas: also make use of the GPIO poweroff driver
John Crispin [Sat, 13 Dec 2014 08:02:52 +0000 (08:02 +0000)]
oxnas: also make use of the GPIO poweroff driver

Works great to power-off the kd20 ;)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43677

9 years agokernel/generic: remove some left-over garbage from ledtrig patch
John Crispin [Sat, 13 Dec 2014 08:00:22 +0000 (08:00 +0000)]
kernel/generic: remove some left-over garbage from ledtrig patch

cosmetics. clean a style issue introduced by r43674.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43676

9 years agooxnas: use libata ledtrig support for kd20 hdd leds
John Crispin [Fri, 12 Dec 2014 20:24:33 +0000 (20:24 +0000)]
oxnas: use libata ledtrig support for kd20 hdd leds

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43675

9 years agokernel/generic: add ledtrig support to libata
John Crispin [Fri, 12 Dec 2014 20:24:21 +0000 (20:24 +0000)]
kernel/generic: add ledtrig support to libata

SVN-Revision: 43674

9 years agooxnas: clean up default package selection
John Crispin [Fri, 12 Dec 2014 20:24:13 +0000 (20:24 +0000)]
oxnas: clean up default package selection

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43673

9 years agokernel.mk: Handle the x86_64 LINUX_KARCH case
Felix Fietkau [Fri, 12 Dec 2014 18:28:13 +0000 (18:28 +0000)]
kernel.mk: Handle the x86_64 LINUX_KARCH case

x64 is handled by the x86 architecture in Linux, add a case for it in
LINUX_KARCH.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43672

9 years agokernel.mk: Refactor LINUX_KARCH affectation
Felix Fietkau [Fri, 12 Dec 2014 18:28:03 +0000 (18:28 +0000)]
kernel.mk: Refactor LINUX_KARCH affectation

Switch to a dumber implementation that will be easier to maintain in the long
run, with only if statements instead of having nested subst calls.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
SVN-Revision: 43671

9 years agokirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
John Crispin [Fri, 12 Dec 2014 17:14:14 +0000 (17:14 +0000)]
kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file

Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43670

9 years agogcc: don't clobber stamp-bits with a symlink to itself
Felix Fietkau [Fri, 12 Dec 2014 17:01:57 +0000 (17:01 +0000)]
gcc: don't clobber stamp-bits with a symlink to itself

Several versions of gcc have an issue in libstdc++v3 where the build may
clobber stamp-bits with a link to itself.  This doesn't manifest itself
on all systems.  On several Ubuntu systems, this doesn't appear to be a
problem, but it is an issue on Fedora 16 systems.

To fix the issue, we'll simply filter out stamp-bits from the symlinks
to be generated.

Note: gcc 4.4.7 is unaffected by this issue, so no fix is necessary
there.

Signed-off-by: John Szakmeister <john@szakmeister.net>
SVN-Revision: 43669

9 years agoar8216: enable cpu port to receive arp and broadcast frames for ar8236
Felix Fietkau [Fri, 12 Dec 2014 16:23:29 +0000 (16:23 +0000)]
ar8216: enable cpu port to receive arp and broadcast frames for ar8236

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43668

9 years agoralink: fix lenovo y1 wan port mapping
John Crispin [Fri, 12 Dec 2014 16:17:31 +0000 (16:17 +0000)]
ralink: fix lenovo y1 wan port mapping

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43667

9 years agoiwinfo: bump to latest git HEAD
John Crispin [Fri, 12 Dec 2014 16:17:24 +0000 (16:17 +0000)]
iwinfo: bump to latest git HEAD

http://patchwork.ozlabs.org/patch/420128/

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43666

9 years agooxnas: build S-ATA driver as a module
John Crispin [Fri, 12 Dec 2014 16:17:13 +0000 (16:17 +0000)]
oxnas: build S-ATA driver as a module

 From: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43665

9 years agoralink: make uartf functional on AWM002
John Crispin [Fri, 12 Dec 2014 16:17:03 +0000 (16:17 +0000)]
ralink: make uartf functional on AWM002

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43664

9 years agooxnas: use u-boot.bin in KDIR
John Crispin [Fri, 12 Dec 2014 16:16:57 +0000 (16:16 +0000)]
oxnas: use u-boot.bin in KDIR

This fixes building *u-boot-initramfs.bin images using ImageBuilder

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43663

9 years agouboot-oxnas: install u-boot.bin also to KERNEL_BUILD_DIR
John Crispin [Fri, 12 Dec 2014 16:16:45 +0000 (16:16 +0000)]
uboot-oxnas: install u-boot.bin also to KERNEL_BUILD_DIR

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43662

9 years agosunxi: fix led on bananapi
Zoltan Herpai [Fri, 12 Dec 2014 16:11:17 +0000 (16:11 +0000)]
sunxi: fix led on bananapi

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43661

9 years agoigmpproxy: do not attempt to ifstatus error messages as json
Felix Fietkau [Fri, 12 Dec 2014 14:52:29 +0000 (14:52 +0000)]
igmpproxy: do not attempt to ifstatus error messages as json

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43660

9 years agoigmpproxy: do not start instance if no upstream interface is available
Felix Fietkau [Fri, 12 Dec 2014 14:52:24 +0000 (14:52 +0000)]
igmpproxy: do not start instance if no upstream interface is available

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43659

9 years agoigmpproxy: fix init script indentation
Felix Fietkau [Fri, 12 Dec 2014 14:52:18 +0000 (14:52 +0000)]
igmpproxy: fix init script indentation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43658

9 years agomxs: allow bootloader to pass kernel cmdline
Zoltan Herpai [Fri, 12 Dec 2014 13:37:21 +0000 (13:37 +0000)]
mxs: allow bootloader to pass kernel cmdline

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43657

9 years agomxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
Zoltan Herpai [Fri, 12 Dec 2014 13:18:29 +0000 (13:18 +0000)]
mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43656

9 years agoscripts/config: remove debug statement
Jo-Philipp Wich [Fri, 12 Dec 2014 12:37:51 +0000 (12:37 +0000)]
scripts/config: remove debug statement

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43655

9 years agoscripts/download.pl: add support for adding mirrors through an environment variable
Felix Fietkau [Fri, 12 Dec 2014 12:35:23 +0000 (12:35 +0000)]
scripts/download.pl: add support for adding mirrors through an environment variable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43654

9 years agobusybox: include config files relative to the main Config.in (#18522)
Jo-Philipp Wich [Fri, 12 Dec 2014 12:33:34 +0000 (12:33 +0000)]
busybox: include config files relative to the main Config.in (#18522)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43653

9 years agoscripts/config: support includes relative to the currently processed file
Jo-Philipp Wich [Fri, 12 Dec 2014 12:29:58 +0000 (12:29 +0000)]
scripts/config: support includes relative to the currently processed file

When the initial glob() attempt on a path specified with "source" statement
yields no result, then retry the globbing on the same path with the directory
part of the currently processed file prepended.

This allows us to reference Config.in files relative to their parent instead
of relative to the top dir.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43652

9 years agomxs: add i2c and spi packages to profiles
Zoltan Herpai [Fri, 12 Dec 2014 12:14:40 +0000 (12:14 +0000)]
mxs: add i2c and spi packages to profiles

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43651

9 years agomxs: fix automatic status led detection
Zoltan Herpai [Fri, 12 Dec 2014 12:01:39 +0000 (12:01 +0000)]
mxs: fix automatic status led detection

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43650

9 years agomxs: update dts file for Duckbill
Zoltan Herpai [Fri, 12 Dec 2014 11:43:56 +0000 (11:43 +0000)]
mxs: update dts file for Duckbill

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43649

9 years agomxs: i2c changes - add package for i2c module - remove i2c debug
Zoltan Herpai [Fri, 12 Dec 2014 11:39:22 +0000 (11:39 +0000)]
mxs: i2c changes - add package for i2c module - remove i2c debug

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43648

9 years agomxs: add kernel module for spi interface
Zoltan Herpai [Fri, 12 Dec 2014 11:10:04 +0000 (11:10 +0000)]
mxs: add kernel module for spi interface

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43647

9 years agomxs: make boardname consistent with other targets
Zoltan Herpai [Fri, 12 Dec 2014 11:03:55 +0000 (11:03 +0000)]
mxs: make boardname consistent with other targets

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43646

9 years agonetifd: Set source IP for DHCP static routes as well
Steven Barth [Fri, 12 Dec 2014 09:39:07 +0000 (09:39 +0000)]
netifd: Set source IP for DHCP static routes as well

Commit ce92f6650bd8a86db04c7a6cbb58e7fdb200a7e6 added source IP support
for DHCP default routes. As a side effect of this change the default route
could be present twice in netifd (once with source IP set and once with
source IP unset) if it was sent by the server in both the router and static
route options. Therefore add source IP support as well for static routes as this
case was not considered. Additional remove unused parameter type.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 43645