Felix Fietkau [Sun, 28 Dec 2014 21:55:21 +0000 (21:55 +0000)]
tools: build libtool after autoconf, not before (fixes #18659)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43793
Hauke Mehrtens [Sun, 28 Dec 2014 19:31:40 +0000 (19:31 +0000)]
ipq806x: refresh patches
This makes the patchs apply again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43792
Imre Kaloz [Sun, 28 Dec 2014 14:45:27 +0000 (14:45 +0000)]
upgrade to new rev, fixes possible compile error
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43791
Felix Fietkau [Sat, 27 Dec 2014 13:37:32 +0000 (13:37 +0000)]
ath10k: fix tx rate selection for ad-hoc mode with HT
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43790
Felix Fietkau [Sat, 27 Dec 2014 13:03:26 +0000 (13:03 +0000)]
oxnas: re-enable ubifs
After the changes make ubinize.cfg optional in image.mk, ubifs
generation can now safely be enabled again.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43789
Felix Fietkau [Sat, 27 Dec 2014 13:03:19 +0000 (13:03 +0000)]
image.mk: make ubinize.cfg optional
When using UbinizeImage with ubifs rootfs, ubinize.cfg is no longer
needed. Yet, the absance of ubinize.cfg would make the build process
abort with an error.
Fix that by checking if ubinize.cfg is present and do no not call the
"classic" ubinize image generation if it isn't.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[missing new-line before UbinizeImage added itentionally]
SVN-Revision: 43788
Felix Fietkau [Sat, 27 Dec 2014 13:03:12 +0000 (13:03 +0000)]
oxnas: clk-oxnas: rework pllb enable function
kernel lock debugging unveiled that we should not call
of_reset_control_get inside a clock's enable operation (see below)
move of_reset_control_* previously used in pllb_clk_enable to new
pllb_clk_prepare and pllb_clk_unprepare functions.
use a container to carry runtime information.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xb8/0xfc()
DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.26 #6
[<
c001a6ac>] (unwind_backtrace) from [<
c0016dec>] (show_stack+0x10/0x14)
[<
c0016dec>] (show_stack) from [<
c0194f68>] (dump_stack+0x7c/0x94)
[<
c0194f68>] (dump_stack) from [<
c0021b50>] (warn_slowpath_common+0x68/0x8c)
[<
c0021b50>] (warn_slowpath_common) from [<
c0021ba4>] (warn_slowpath_fmt+0x30/0x40)
[<
c0021ba4>] (warn_slowpath_fmt) from [<
c0061b30>] (lockdep_trace_alloc+0xb8/0xfc)
[<
c0061b30>] (lockdep_trace_alloc) from [<
c00cb740>] (kmem_cache_alloc+0x1c/0xf8)
[<
c00cb740>] (kmem_cache_alloc) from [<
c01d33c8>] (of_reset_control_get+0xe8/0x12c)
[<
c01d33c8>] (of_reset_control_get) from [<
c0269228>] (pllb_clk_enable+0x14/0xbc)
[<
c0269228>] (pllb_clk_enable) from [<
c0265738>] (__clk_enable+0x54/0xa0)
[<
c0265738>] (__clk_enable) from [<
c0265acc>] (clk_enable+0x18/0x2c)
[<
c0265acc>] (clk_enable) from [<
c04325f8>] (oxnas_pcie_probe+0x3b8/0x6a0)
[<
c04325f8>] (oxnas_pcie_probe) from [<
c01f2510>] (platform_drv_probe+0x18/0x48)
[<
c01f2510>] (platform_drv_probe) from [<
c01f1070>] (driver_probe_device+0xd8/0x24c)
[<
c01f1070>] (driver_probe_device) from [<
c01f1298>] (__driver_attach+0x70/0x94)
[<
c01f1298>] (__driver_attach) from [<
c01ef728>] (bus_for_each_dev+0x4c/0x98)
[<
c01ef728>] (bus_for_each_dev) from [<
c01f0818>] (bus_add_driver+0xcc/0x1e8)
[<
c01f0818>] (bus_add_driver) from [<
c01f169c>] (driver_register+0xa0/0xe8)
[<
c01f169c>] (driver_register) from [<
c01f2568>] (platform_driver_probe+0x20/0xa4)
[<
c01f2568>] (platform_driver_probe) from [<
c0013a3c>] (do_one_initcall+0x90/0x140)
[<
c0013a3c>] (do_one_initcall) from [<
c0421d38>] (kernel_init_freeable+0x1e4/0x2c0)
[<
c0421d38>] (kernel_init_freeable) from [<
c000c214>] (kernel_init+0x8/0x104)
[<
c000c214>] (kernel_init) from [<
c0008768>] (ret_from_fork+0x14/0x2c)
---[ end trace
5f17ed2f61e0683f ]---
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43787
Felix Fietkau [Sat, 27 Dec 2014 13:02:58 +0000 (13:02 +0000)]
kernel/generic: fix warnings if libata-ledtrig is disabled
accidentally #if was used instead of #ifdef, thus gcc warned
about CONFIG_ATA_LEDS being undefined...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43786
Felix Fietkau [Sat, 27 Dec 2014 13:00:09 +0000 (13:00 +0000)]
binutils: run install twice instead of overwriting the final toolchain with the initial one
fixes compiler error after a binutils rebuild/reinstall without
rebuilding the rest of the toolchain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43785
Felix Fietkau [Sat, 27 Dec 2014 12:59:59 +0000 (12:59 +0000)]
build: use gcc-provided ar, nm and ranlib where appropriate
Since GCC 4.7, GCC provides its own wrappers around ar, nm and ranlib, which
should be used for builds with link-time optimization. Since GCC 4.9, using them
actually necessary for LTO builds using convenience libraries to succeed.
There are some packages which try to automatically detect if gcc-{ar,nm,ranlib}
exist (one example is my package "fastd" in the package repository, which tries
to use LTO). This breaks because the OpenWrt build system explicitly sets the
binutils versions of these tools.
As it doesn't cause any issues to use gcc-{ar,nm,ranlib} instead of
{ar,nm,ranlib} even without LTO, this patch just makes OpenWrt use the
GCC-provided versions by default, which fixes the build of such packages with
GCC 4.9.
(I know that builds fail though when clang is used with -flto and
gcc-{ar,nm,ranlib}, but as all OpenWrt toolchains are based on GCC, this isn't
a real issue.)
Completely cleaning the tree (or at least `make clean toolchain/clean`) is
necessary to get a consistent state after the binutils plugins support patch and
this one (as trying to use gcc-{ar,nm,ranlib} with a binutils built without
plugin support will definitely lead to a build failure).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43784
Felix Fietkau [Sat, 27 Dec 2014 12:59:53 +0000 (12:59 +0000)]
binutils: enable plugin support
--enable-plugin is necessary for gcc-ar, gcc-nm and gcc-ranlib to work, which
must be used with GCC 4.9 for LTO to work.
Without this option, gcc-ar etc. will just fail with
sorry - this program has been built without plugin support
Using the normal ar from binutils with GCC 4.9 and -flto will cause linking
with static "convenience" libraries to fail.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43783
Felix Fietkau [Sat, 27 Dec 2014 12:59:47 +0000 (12:59 +0000)]
hostapd: add support for configuring supported rates
patch by Wilco Baan Hofman from #18627
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43782
Imre Kaloz [Fri, 26 Dec 2014 14:48:33 +0000 (14:48 +0000)]
fix mvneta vlan tagging
This is a 3.14.x backport of:
"mvneta: Fix TSO and checksum for non-acceleration vlan traffic"
Upstream commits:
817dbfa5d1bc276a72c1a577310382008e8aca0a
2d39d120781a5770573dc6ed672a5a562f541aea
Fixes vlan tagging on SoC interfaces for the WRT1900AC. Useful
when using mvsw6171 driver.
Signed-off-by: Mark Milburn <mark.a.milburn@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43781
Imre Kaloz [Fri, 26 Dec 2014 14:31:45 +0000 (14:31 +0000)]
don't copy initramfs.elf unconditionally
targets that need it should do it in their image Makefile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43780
Imre Kaloz [Fri, 26 Dec 2014 13:45:18 +0000 (13:45 +0000)]
only call UbinizeImage and BuildSysUpgrade for boards we support them on
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43779
Imre Kaloz [Fri, 26 Dec 2014 13:33:22 +0000 (13:33 +0000)]
The ubinized filesystems should be used for generating the final images, so store them in KDIR instead.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43778
Felix Fietkau [Fri, 26 Dec 2014 12:36:38 +0000 (12:36 +0000)]
ar71xx: add flush reset register writes, should fix restart issues (#17839)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43777
Felix Fietkau [Fri, 26 Dec 2014 12:36:30 +0000 (12:36 +0000)]
kernel: backport a few PHY layer fixes from upstream
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43776
Felix Fietkau [Fri, 26 Dec 2014 12:36:22 +0000 (12:36 +0000)]
ar71xx: rename/refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43775
Imre Kaloz [Thu, 25 Dec 2014 22:34:15 +0000 (22:34 +0000)]
we've changed places with Luka, reflect that :)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43774
Imre Kaloz [Thu, 25 Dec 2014 22:29:29 +0000 (22:29 +0000)]
use mwlwifi by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43773
Imre Kaloz [Thu, 25 Dec 2014 22:26:43 +0000 (22:26 +0000)]
Marvell 88W8864 open source mac80211 driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43772
Steven Barth [Tue, 23 Dec 2014 13:34:04 +0000 (13:34 +0000)]
netifd: minor fixes, add mldversion option
thanks to Hans Dedecker
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43771
Felix Fietkau [Mon, 22 Dec 2014 21:46:38 +0000 (21:46 +0000)]
mac80211: fix HT mode selection for ad-hoc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43769
Felix Fietkau [Mon, 22 Dec 2014 20:47:10 +0000 (20:47 +0000)]
oxnas: sata_oxnas: make irq handler more readable
safed one level of indention by using 'continue' instead of a
lengthy if-clause.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: use logic-AND instead of '?' operator when checking for hw bug 6320
SVN-Revision: 43768
Felix Fietkau [Mon, 22 Dec 2014 20:47:01 +0000 (20:47 +0000)]
oxnas: sata_oxnas: refactoring phase 2
- replaced // comments by /* comments */
- added line-breaks where needed
- fixed white-space according to kernel style
- fixed some obvious spelling mistakes in comments and printks
- removed some unneeded left-overs imported from vendor code-base
- replaced printk(...) by libata macros where possible
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43767
Felix Fietkau [Mon, 22 Dec 2014 20:46:49 +0000 (20:46 +0000)]
oxnas: sata_oxnas: refactoring phase 1
locking for 2nd port and hwraid was added from vendor's GPL code which
doesn't comply with current kernel coding style.
- moved all global variables into host_priv
- renamed locks
- sanetized acquire() and release() parameter list
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43766
Felix Fietkau [Mon, 22 Dec 2014 20:46:41 +0000 (20:46 +0000)]
oxnas: refresh kernel config-3.1[48]
and no longer compile-in ext4 filesystem now that sata_oxnas is
also built as a module.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43765
Felix Fietkau [Mon, 22 Dec 2014 14:37:07 +0000 (14:37 +0000)]
kernel: remove openwrt micrel.c (replaced by upstream driver)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43762
Felix Fietkau [Mon, 22 Dec 2014 14:32:41 +0000 (14:32 +0000)]
ubi-utils: add mirror md5sum
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43761
Felix Fietkau [Mon, 22 Dec 2014 13:52:58 +0000 (13:52 +0000)]
tools/mtd-utils: add mirror md5sum
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43760
Steven Barth [Mon, 22 Dec 2014 09:52:19 +0000 (09:52 +0000)]
dnsmasq: also add the actual patches...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43759
Steven Barth [Mon, 22 Dec 2014 09:51:22 +0000 (09:51 +0000)]
dnsmasq: backport some dnssec fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43758
Felix Fietkau [Sat, 20 Dec 2014 15:26:38 +0000 (15:26 +0000)]
kernel: disable soft-reset for generic PHY devices to avoid accidentally clearing preinitialized state
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43757
Felix Fietkau [Sat, 20 Dec 2014 15:26:31 +0000 (15:26 +0000)]
buffalo-enc: pass the longstate option to decryption
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43756
Felix Fietkau [Sat, 20 Dec 2014 15:26:25 +0000 (15:26 +0000)]
buffalo-enc: accept the longstate command line option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43755
Rafał Miłecki [Sat, 20 Dec 2014 15:09:01 +0000 (15:09 +0000)]
bcm53xx: support WAN connected to switch port 0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43754
Luka Perkov [Fri, 19 Dec 2014 22:02:59 +0000 (22:02 +0000)]
mvsw6171: note support for
88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43753
Luka Perkov [Fri, 19 Dec 2014 11:05:13 +0000 (11:05 +0000)]
kirkwood: add *plugs to uci-defaults
Set defaults health led to a timer heartbeet (200/800)
and populate network for:
- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43752
Luka Perkov [Thu, 18 Dec 2014 18:38:43 +0000 (18:38 +0000)]
kikwood: populate kirkwood.sh with new boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43751
Luka Perkov [Thu, 18 Dec 2014 18:38:38 +0000 (18:38 +0000)]
kirkwood: set default EA4500 switch config
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43750
Hauke Mehrtens [Thu, 18 Dec 2014 16:25:22 +0000 (16:25 +0000)]
kernel: bgmac: fix some problems
There are some problems in the napi usage that are fixed now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43749
Hauke Mehrtens [Thu, 18 Dec 2014 16:23:42 +0000 (16:23 +0000)]
bcm53xx: PCIe: add link check again
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43748
Luka Perkov [Thu, 18 Dec 2014 15:53:46 +0000 (15:53 +0000)]
uboot-envtools: add more kirkwood boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43747
Felix Fietkau [Thu, 18 Dec 2014 11:57:42 +0000 (11:57 +0000)]
ar7: remove leftover 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43746
Felix Fietkau [Thu, 18 Dec 2014 11:57:36 +0000 (11:57 +0000)]
binutils: break-out libbfd, libopcodes and ar
Package libbfd, libopcodes and ar seperately.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43745
Felix Fietkau [Thu, 18 Dec 2014 11:28:53 +0000 (11:28 +0000)]
ar71xx: add support for qca956x soc
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.
tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 43744
Felix Fietkau [Thu, 18 Dec 2014 11:28:47 +0000 (11:28 +0000)]
ar8216: Inline function ar8xxx_create_mii
Inline function ar8xxx_create_mii.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43743
Felix Fietkau [Thu, 18 Dec 2014 11:28:39 +0000 (11:28 +0000)]
ar8216: Remove read/write/rmw member functions from ar8xxx_priv
Remove read/write/rmw member functions from ar8xxx_priv
There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43742
Felix Fietkau [Thu, 18 Dec 2014 11:28:34 +0000 (11:28 +0000)]
ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43741
Felix Fietkau [Thu, 18 Dec 2014 11:28:28 +0000 (11:28 +0000)]
ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43740
Felix Fietkau [Thu, 18 Dec 2014 11:28:20 +0000 (11:28 +0000)]
ar8216: remove unused function parameter in ar8327_led_register
Remove unused function parameter in ar8327_led_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43739
Rafał Miłecki [Wed, 17 Dec 2014 14:53:25 +0000 (14:53 +0000)]
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43738
Felix Fietkau [Wed, 17 Dec 2014 12:27:14 +0000 (12:27 +0000)]
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43736
Luka Perkov [Wed, 17 Dec 2014 08:33:55 +0000 (08:33 +0000)]
kirkwood: add sheevaplug and derivatives
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
SVN-Revision: 43735
Imre Kaloz [Wed, 17 Dec 2014 08:27:38 +0000 (08:27 +0000)]
Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43734
Steven Barth [Wed, 17 Dec 2014 05:59:12 +0000 (05:59 +0000)]
dnsmasq: allow de-selecting features from -full variant.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 43733
Steven Barth [Tue, 16 Dec 2014 12:43:50 +0000 (12:43 +0000)]
iproute2: bump version from 3.16.0 to 3.17.0
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 43731
Steven Barth [Tue, 16 Dec 2014 09:28:59 +0000 (09:28 +0000)]
nftables: bump to release 0.4, cleanup our patches
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43730
Steven Barth [Tue, 16 Dec 2014 09:22:49 +0000 (09:22 +0000)]
libnftnl: bump to upstream release 1.0.3
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43729
Steven Barth [Tue, 16 Dec 2014 09:16:00 +0000 (09:16 +0000)]
cyassl: bump to 3.3.0
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43728
Felix Fietkau [Mon, 15 Dec 2014 20:14:27 +0000 (20:14 +0000)]
build: prevent spurious host-build re-builds by touching .built after the install command before touching .installed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43721
John Crispin [Mon, 15 Dec 2014 15:55:37 +0000 (15:55 +0000)]
ralink: remove partitoon map from mt7621.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720
Rafał Miłecki [Mon, 15 Dec 2014 15:43:46 +0000 (15:43 +0000)]
bcm53xx: sysupgrade support for devices with serial flash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43719
Rafał Miłecki [Mon, 15 Dec 2014 11:09:14 +0000 (11:09 +0000)]
brcm47xx: extract magics from specific upgrade images (and still reject them)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43718
John Crispin [Mon, 15 Dec 2014 10:37:14 +0000 (10:37 +0000)]
fstools: update to latest git HEAD
adds a few cleanups and extroot/ubi support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43717
John Crispin [Mon, 15 Dec 2014 10:37:09 +0000 (10:37 +0000)]
uboot-envtools: enable UBI support per default on oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43716
John Crispin [Mon, 15 Dec 2014 10:37:00 +0000 (10:37 +0000)]
add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
Rafał Miłecki [Mon, 15 Dec 2014 09:59:44 +0000 (09:59 +0000)]
brcm47xx: detect (and still reject for now) CyberTAN fw format
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43714
John Crispin [Mon, 15 Dec 2014 09:44:01 +0000 (09:44 +0000)]
procd: update to latest git HEAD
fixes a bug where wdt write happened with no valid fd available
--> procd: WDT failed to write: Bad file descriptor
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43711
Steven Barth [Mon, 15 Dec 2014 09:41:47 +0000 (09:41 +0000)]
nftables: mini-bump and patch cleanup
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43710
Rafał Miłecki [Mon, 15 Dec 2014 09:10:43 +0000 (09:10 +0000)]
ramips: update mtd patches to apply after changes from r43700
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709
Rafał Miłecki [Mon, 15 Dec 2014 08:51:14 +0000 (08:51 +0000)]
brcm47xx: use separated function in upgrade to detect file type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43708
Steven Barth [Sun, 14 Dec 2014 16:03:45 +0000 (16:03 +0000)]
nftables: bump to latest git, fix mini-gmp patches
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43707
Steven Barth [Sun, 14 Dec 2014 16:03:18 +0000 (16:03 +0000)]
libnftnl: bump to latest git
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43706
John Crispin [Sun, 14 Dec 2014 08:57:58 +0000 (08:57 +0000)]
kirkwood: enable EA4500 switch on 3.18
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43704
John Crispin [Sun, 14 Dec 2014 08:57:52 +0000 (08:57 +0000)]
gemini: update usb driver and merge registers into one patch
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43703
John Crispin [Sun, 14 Dec 2014 08:57:43 +0000 (08:57 +0000)]
gemini: merge register ethernet patches into one
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 43702
John Crispin [Sun, 14 Dec 2014 08:57:16 +0000 (08:57 +0000)]
ralink: drop old pinmux nodes from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701
Rafał Miłecki [Sun, 14 Dec 2014 00:35:03 +0000 (00:35 +0000)]
kernel: warn users to use the new (dedicated) firmware splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43700
Felix Fietkau [Sat, 13 Dec 2014 23:58:47 +0000 (23:58 +0000)]
toolchain: do not include libatomic.so in the libc package
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43699
Felix Fietkau [Sat, 13 Dec 2014 23:58:35 +0000 (23:58 +0000)]
nvram: remove libnvram.so, it is unused and incompatible to the broadcom API anyway
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43698
Rafał Miłecki [Sat, 13 Dec 2014 20:06:47 +0000 (20:06 +0000)]
kernel: move old firmware uimage splitter into separated patch
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43696
Felix Fietkau [Sat, 13 Dec 2014 14:01:26 +0000 (14:01 +0000)]
scripts/config: fix segfault introduced in r43652
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43695
Felix Fietkau [Sat, 13 Dec 2014 11:57:14 +0000 (11:57 +0000)]
build: ensure tools are built before building the toolchain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43693
Felix Fietkau [Sat, 13 Dec 2014 11:55:59 +0000 (11:55 +0000)]
realview: drop old kernel configs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43692
Felix Fietkau [Sat, 13 Dec 2014 11:55:49 +0000 (11:55 +0000)]
au1000: remove leftover 3.3 kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43691
Felix Fietkau [Sat, 13 Dec 2014 11:55:41 +0000 (11:55 +0000)]
au1000: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43690
Felix Fietkau [Sat, 13 Dec 2014 11:55:32 +0000 (11:55 +0000)]
rb532: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43689
Felix Fietkau [Sat, 13 Dec 2014 11:55:24 +0000 (11:55 +0000)]
at91: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43688
Felix Fietkau [Sat, 13 Dec 2014 11:55:11 +0000 (11:55 +0000)]
brcm2708: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43687
Felix Fietkau [Sat, 13 Dec 2014 11:55:04 +0000 (11:55 +0000)]
ixp4xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43686
Felix Fietkau [Sat, 13 Dec 2014 11:54:57 +0000 (11:54 +0000)]
lantiq: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43685
Felix Fietkau [Sat, 13 Dec 2014 11:54:49 +0000 (11:54 +0000)]
mpc85xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43684
Florian Fainelli [Sat, 13 Dec 2014 08:08:30 +0000 (08:08 +0000)]
netlogic: fix XLR network driver build
Backport an upstream submission to fix xlr_net
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43682
John Crispin [Sat, 13 Dec 2014 08:07:03 +0000 (08:07 +0000)]
ramips:Add support for Aigale Ai-BR100
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681
John Crispin [Sat, 13 Dec 2014 08:06:22 +0000 (08:06 +0000)]
mxs: indention and whitespace fixes
Align this file with the style of most other modules.mk.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 43680
John Crispin [Sat, 13 Dec 2014 08:06:01 +0000 (08:06 +0000)]
ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.
SVN-Revision: 43679
John Crispin [Sat, 13 Dec 2014 08:04:54 +0000 (08:04 +0000)]
oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43678
John Crispin [Sat, 13 Dec 2014 08:02:52 +0000 (08:02 +0000)]
oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43677
projects / openwrt / staging / linusw.git / log