staging: rtl8187se: Convert _link_detect_t typedef into a struct.

The Documentation/CodingStyle doesn't recommend the use of typedef, convert
this to structure.

While at it, I have also renamed the variable names that were used in
this typedef not to use Hungarian notation.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Convert Stats typedef into a struct

The Documentation/CodingStyle doesn't recommend the use of typedef, convert
this to structure.

While at it, I have also renamed the variable names that were used in
this typedef not to use Hungarian notation.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Convert ChnlAccessSetting typedef into a struct.

The Documentation/CodingStyle doesn't recommend the use of typedef, convert
this to structure.

While at it, I have also renamed the variable names that were used in
this typedef not to use Hungarian notation.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Added parenthesis in a macro in r8180.h

This patch adds parentheses to enclose a complex value in a macro as a the
CodingStyle recommends.

This errors was found by checkpatch.pl script

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed a pointer declaration error in r8180.h

This patch fixes a pointer declaration error found by checkpatch.pl in
r8180.h

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed open brace in r8180.h

The open brace following struct have to go on the same line as a codingStyle of
 the kernel recommends

This patch fixed errors with a open brace found by checkpatch.pl script in
r8180.h

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Clean-up comment line style in r8180.h

This patch clean-up comment-line style in r8180 as the CodingStyle recommends.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed whitespaces and indentations in r8180.h

This patch fixes whitespaces and converts some indentations to whitespaces and
whitespaces to indentations when it is necessary as the codingStyle of the
 kernel recommends.
Thus, It deletes a lot of errors found by checkpatch.pl in r8180.h

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm7xxfb: Fix quoted string split across lines in sm7xxfb.c

This patch fixes the following checkpatch.pl issues in sm7xxfb.c:
WARNING: Quoted string split across lines

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: make functions as static

These functions are only referenced in this file scope
so it can be marked static.
And remove space between function name and open parenthesis.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sep: Fix line length over 80 characters in sep_main.c

This patch fixes the following checkpatch.pl warning in sep_main.c
WARNING: line length over 80 characters

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sep: Fix quoted string split across lines in sep_main.c

This patch fixes the following checkpatch.pl warning in sep_main.c
WARNING: Quoted string split across lines

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sep: Fix missing space after return type in sep_crypto.c

This patch fixes the following checkpatch.pl warning in sep_main.c
WARNING: Missing space after return type

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: fix checkpatch error 'assignment in if condition'

clean up checkpatch errors and bClassificationSucceed is set to "TRUE"
proper location.

If protocal is not TCP or UDP, when it checks protocal, bClassificationSucceed
must be set to TRUE.
Also the end of do-while(0) loop, bClassificationSucceed is set to TRUE.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: bcm: Remove unneeded set a variable

bClassificationSucceed is initialized with "false",
do not need to set "false" again.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: struct vnt_usb_send_context struct size optimization.

Reorder in size and remove dead member Next.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove pointer cast to urb->context.

Remove unnecessary cast to void * urb->context

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Cleanup PIPEnsBulkInUsbRead

Remove camel case and white space.

Camel case changes
pDevice -> priv
pRCB -> rcb
ntStatus -> status
pUrb -> urb

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: clean up s_nsBulkInUsbIoCompleteRead

Clean up white space and camel case.

Camel case changes
pDevice -> priv
pRCB -> rcb
bReAllocSkb -> re_alloc_skb

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_nsBulkInUsbIoCompleteRead Replace error handling.

Use switch on urb->status

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_nsBulkInUsbIoCompleteRead Remove bytesRead/bIndicateReceive.

Replace with urb->actual_length.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_nsBulkInUsbIoCompleteRead get rid of status.

Just use urb->status directly.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: clean up PIPEnsSendBulkOut.

Remove commented out code, white space and camel case.

camel case changes
pDevice -> priv
pContext -> context
pUrb -> urb

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: usb_fill_bulk_urb get rid of void* cast.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: PIPEnsSendBulkOut reverse if statement

Get rid of unnessary else statement by !(MP_IS_READY(pDevice) &&
pDevice->Flags & fMP_POST_WRITES)

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: fix kernel oops on port open

This patch addresses the follow error message followed
by a kernel oops:

dgap: driver does not set tty->port. This will crash the kernel later. Fix the driver

It also renames the main function this patch addresses because
its name is misleading.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix C99 style comments in pci.c and pci.h

This patch fix C99 style comments in pci.c and pci.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix C99 style comments in efuse.c

Fix C99 style comments in efuse.c.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix typo in rtl8821ae/btcoexist

Fix spelling typo in rtl8821ae/btcoexist.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix typo in rtl8821ae/rtl8821ae.

Fix spelling typo in comment and printk within
rtl8821ae/rtl8821ae.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix typo in comment and printk in rtl8821ae

Fix spelling typo in comment and printk within rtl8821ae.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: parallel-display: Add drm_panel support

This patch allows to optionally attach the parallel-display to a panel
supported by a drm_panel driver instead of supplying the modes via
device tree.

Before:
parallel-display {
compatible = "fsl,imx-parallel-display";
...

display-timings {
native-timing = <&timing1>;
timing1: etm0700g0dh6 {
hactive = <800>;
vactive = <480>;
clock-frequency = <33260000>;
hsync-len = <128>;
hback-porch = <88>;
hfront-porch = <40>;
vsync-len = <2>;
vback-porch = <33>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
...
};
};
...
};

After:
parallel-display {
compatible = "fsl,imx-parallel-display";
fsl,panel = <&panel>;
...
};

panel: panel {
compatible = "edt,etm0700g0dh6", "simple-panel";
};

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: ipu-dc: Use usleep_range instead of msleep

Since msleep(2) can sleep up to 20ms anyway, make this explicit by using
usleep_range(2000, 20000).

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: Move IPU_PIX_FMT_GBR24 definition into imx-ipu-v3.h

The IPU display controller supports a non-standard green-red-blue ordered
format that is used on the connection between IPU display interface 1 and
the TV encoder on i.MX53.
In preparation for the move of IPU core code out of staging, place the
IPU_PIX_FMT_GBR24 definition in imx-ipu-v3.h, so that both the IPU
display interface driver and the TVE encoder driver can access it.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: Fix quoted string split across line in panel.c

This patch fixes the following checkpatch.pl warning in panel.c:
WARNING: quoted string split across lines

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: Fix space prohibited between function name and open paranthesis

This patch fixes the following checkpatch.pl issues in panel.c:
WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Clean-up comment line style in r8180_core.c

This patch clean-up comment-line style in r8180_core.c as the CodingStyle
recommends.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Replace min macro with min_t

Instead of an explicit cast the min_t macro should be used.

Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Convert CHANNEL_LIST typedef into a struct.

The Documentation/CodingStyle doesn't recommend the use of typedef, convert
this to structure.

While at it, I have also renamed the variable names that were used in
this typedef not to use Hungarian notation.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Deleted rtl8180_len2duration functions in r8180_core.c

After the next warning messages by sparse tools:

drivers/staging/rtl8187se/r8180_core.c:1621:5: warning: symbol 'rtl8180_len2duration' was not declared. Should it be static?
drivers/staging/rtl8187se/r8180_core.c:1621:12: warning: ‘rtl8180_len2duration’ defined but not used [-Wunused-function]
 static u16 rtl8180_len2duration(u32 len, short rate, short *ext)
            ^

And the next search:
$ grep -ir rtl8180_len2duration ./*
./r8180_core.c:u16 rtl8180_len2duration(u32 len, short rate, short *ext)
Binary file ./r8187se.ko matches
Binary file ./r8187se.o matches

I decided to delete rtl8180_len2duration function.

Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Fix build issues with new binder API

The new 64bit binder API causes build issues on 32bit ARM
due to the lack of 64bit __get_user_asm_* implementation.

Until that implementation is done, remove the choice for
32bit ARM, automatically enabling the old 32bit binder
protocol.

This can be reverted once a 64bit __get_user_asm_*
implementation is merged.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Reported-by: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cxt1e1: Fix line length over 80 characters in functions.c

This patch fixes the following checkpatch.pl warning in functions.c
WARNING: Line length over 80 characters

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cxt1e1: Fix space prohibited between function name and open parenthesis '('

This patch fixes the following checkpatch.pl warning in functions.c
WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cxt1e1: Fix no spaces at the start of a line in functions.c

This patch fixes the following checkpatch.pl warning in functions.c
WARNING: please no spaces at the start of a line in

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ced401: fix double unlock bug

After spin_lock() is called, all of if-else conditions in this brace
should reach the end of else and spin_unlock() must be called.
So It doesn't need to call spin_unlock() without a return statement
for handling an error.

Also sparse says:
drivers/staging/ced1401/usb1401.c:1080:28: warning:
 context imbalance in 'Handle1401Esc' - unexpected unlock

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: addi-data: clean-up variable use in hwdrv_apci035.c

The variable ui_Command is as of right now being cleared to a
value of zero between everytime that it writes to a port and then takes a
new value from a port.  Seems like this zeroing is unnecessary, so we can
just remove these lines.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: fix for a potential NULL pointer dereference

Return -ENOMEM in ni_E_init if ni_gpct_device_construct returns NULL

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Fix unnecessary space after function pointer

This patch fixes the following checkpatch.pl warning in comedidev.h
WARNING: Fix unnecessary space after function pointer

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: fix compile warnings by remove dead code

The last patch series exposed some dead code causing compile warnings.
This patch removes that dead code and fixes the warnings

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: addi-data: fix a couple of lines that are too long

There are a couple of cases where a comment being on the same line as a
statement is causing the line to be over 80 characters long.  This is an
easy fix, move these comments to the previous line.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: addi-data: cleanup conditional blocks in hwdrv_apci035.c

There were some conditional blocks that had an unnecessary level of
indentation in them.  We can remove this to improve code clarity.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: addi-data: comment cleanup in hwdrv_apci035.c

This patch further cleans up the comments in hwdrv_apci035.c, converting
them to kernel style and removing some commented conditional statements
that are unused.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Fix line length exceeding 80 characters

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove typedef enum _CONTEXT_TYPE

Replace with enum

assign as u8 type.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: clean up s_nsBulkOutIoCompleteWrite.

Remove commented out, white space and camel case.

Camel case changes
pContext -> context
pDevice -> priv
ContextType -> context_type
ulBufLen -> buf_len

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_nsBulkOutIoCompleteWrite add error handling,

change pContext->bBoolInUse to false on connection errors.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_nsBulkOutIoCompleteWrite reorganise variable order.

Declare in order of pointer use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: vRunCommand remove multi calls to s_bCommandComplete.

Remove calls with break
s_bCommandComplete(pDevice);
spin_unlock_irq(&pDevice->lock);
return;

Add single call to s_bCommandComplete;

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Move device_set_multi code call to vRunCommand

device_set_multi is an atomic call, in order to reduce atomic area of driver
move code to be called from vRunCommand.

Later the atomic area of vRunCommand can be reduced.

Change existing code in device_set_multi to new function
vnt_configure_filter minus its locks.

Change device_set_multi to call bScheduleCommand

device_set_multi is nolonger called from device open.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Replace typedef struct INT_BUFFER, *PINT_BUFFER

Replace with struct vnt_interrupt_buffer.

Using only the live member of old structure
pDataBuf -> data_buf
bInUse -> in_use

uDataLen is unused and dropped.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: clean up PIPEnsInterruptRead.

Remove comments, white space and camel case.

Camel case changes
pDevice -> priv
ntStatus -> status

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: PIPEnsInterruptRead set intBuf.bInUse to false.

set intBuf.bInUse to false on return error.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: PIPEnsInterruptRead use usb_fill_int_urb

Change to usb_fill_int_urb which has int_interval.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192e: Remove unused code

Remove unused #defines, structure, and inlined functions for the
rtl8192e driver.  Compile tested only.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Add in-kernel firmware loading support

This patch adds in-kernel firmware loading support and removes
support for the original userland firmware loading process.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Rename driver

Renames driver file dgap_driver.c and dgap_driver.h to
dgap.c and dgap.h because we are now single source and
include file and better fits kernel naming conventions.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Make merged and local functions and variables static

This patch makes all merged and original functions static to dgap.c.
Doing so has revealed more dead code via gcc warnings.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge digi.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_types.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_kcompat.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_parse.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_conf.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_pci.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_fep5.h into dgap_driver.h

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_sysfs.h into dgap_driver.c

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_tty.h into dgap_driver.c

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Remove unneeded dgap_trace.c and dgap_trace.h

Removes unneeded files dgap_trace.c and dgap_trace.h

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_parses.c into dgap_driver.c

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_sysfs.c into dgap_driver.c

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_fep5.c into dgap_driver.c

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Merge dgap_tty.c into dgap_driver.c

There is a lot of cleanup work to do on these digi drivers and merging as
much as is possible will make it easier. I also notice that many merged
drivers are single source and header.

Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Remove userland source code files

This patch removes userland source code files downld.c and dgap_downld.h

Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Remove CVS ID tags

This patch removes all the original CVS tags because they are in my way

Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: binder: Improve Kconfig entry for ANDROID_BINDER_IPC_32BIT

Add a more clear explanation of the option in the prompt, and
make the config depend on ANDROID_BINDER_IPC being selected.

Also sets the default to y, which matches AOSP.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: binder: Support concurrent 32 bit and 64 bit processes.

For 64bit systems we want to use the same binder interface for 32bit and
64bit processes. Thus the size and the layout of the structures passed
between the kernel and the userspace has to be the same for both 32 and
64bit processes.

This change replaces all the uses of void* and size_t with
binder_uintptr_t and binder_size_t. These are then typedefed to specific
sizes depending on the use of the interface, as follows:
       * __u32 - on legacy 32bit only userspace
       * __u64 - on mixed 32/64bit userspace where all processes use the same
interface.

This change also increments the BINDER_CURRENT_PROTOCOL_VERSION to 8 and
hooks the compat_ioctl entry for the mixed 32/64bit Android userspace.

This patch also provides a CONFIG_ANDROID_BINDER_IPC_32BIT option for
compatability, which if set which enables the old protocol, setting
BINDER_CURRENT_PROTOCOL_VERSION to 7, on 32 bit systems.

Please note that all 64bit kernels will use the 64bit Binder ABI.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
[jstultz: Merged with upstream type changes. Various whitespace fixes
and longer Kconfig description for checkpatch. Included improved commit
message from Serban (with a few tweaks).]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: binder: Fix ABI for 64bit Android

BC_REQUEST_DEATH_NOTIFICATION and BC_CLEAR_DEATH_NOTIFICATION were
defined with the wrong structure that did not match the code. Since a
binder pointer and handle are the same size on 32 bit systems, this
change does not affect them. The two commands claimed they were using
struct binder_ptr_cookie but they are using a 32bit handle and a pointer.

The main purpose of this patch is to add the binder_handle_cookie
struct so the service manager does not have to define its own version
(libbinder writes one field at a time so it does not use the struct).

On 32bit systems the payload size is the same as the size of struct
binder_ptr_cookie. On 64bit systems, the size does differ, and the
ioctl number does change. However, there are no known 64bit users of
this interface, and any 64bit systems will need the following patch to
run 32 bit processes anyway, so it is not expected that anyone will
ship a 64bit system without this change, so this change should not
affect any existing systems.

Cc: Colin Cross <ccross@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
[jstultz: Few 80+ col fixes for checkpatch, improved commit message
with help from Serban, and included rational from Arve's email]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'imx-drm-staging' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into staging-next

Russell writes:

These changes, which convert imx-drm to use the recently merged
component infrastructure, have been reviewed and acked by Philipp Zabel,
Shawn Guo and Fabio Estevam, and are now deemed to be ready.

Merge 3.14-rc4 into staging-next.

We want those fixes here as well.

imx-drm: imx-hdmi: add hotplug support to HDMI component

Add hotplug support.  We have to make the interrupt handler threaded so
we can call drm_helper_hpd_irq_event().  Keeping in mind that we will
want to share the interrupt with other HDMI interface drivers (eg, audio
and CEC) put the groundwork in now for that, rather than just using
IRQF_ONESHOT.

Also, we must not call drm_helper_hpd_irq_event() until we have fully
setup the connector; keep the interrupt(s) muted until after that point.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: add core hotplug connector support

Add core imx-drm support for hotplug connector support.  We need to
setup the poll helper after we've setup the connectors; the helper
scans the connectors to determine their capabilities.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: various cleanups

Various cleanups are possible after the previous round of changes; these
have no real functional bearing other than tidying up the code.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: move allocation of imxdrm device to driver load function

It is now no longer necessary to keep this structure around; we can
allocate it upon DRM driver load and destroy it thereafter without
affecting the other components now.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: kill off mutex

This mutex doesn't protect anything anymore; get rid of it.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: get rid of drm_mode_group_init_legacy_group()

Since we're now operating like a conventional DRM driver, doing all
the initialisation within the driver's ->load callback, we don't
need to mess around with the mode groups - we can rely on the one
in the DRM platform code.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: remove imx_drm_connector and imx_drm_encoder code

The core imx_drm_connector and imx_drm_encoder code is no longer
required - the connectors and encoders are all using the component
support, so we can remove this.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: initialise drm components directly

Now that our bind function is only ever called during the main DRM
driver ->load callback, we don't need to have the imx_drm_connector or
imx_drm_encoder abstractions anymore.  So let's get rid of it, and move
the DRM connector and encoder setup into the connector support files.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: provide common connector and encoder cleanup functions

Provide two helper functions to assist with cleaning up imx-drm
connectors and encoders.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: imx-drm-core: provide helper function to parse possible crtcs

Provide a helper function to parse possible crtcs before the encoder
is registered.  The crtc mask is derived from the position of the
CRTCs registered in the drm_device.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: use supplied drm_device where possible

The component helper provides us the drm_device which is being
registered.  Rather than having to reference a global in imx-drm-core,
use this to get the imxdrm device, and also use it to register the CRTC
against.

This means we never have CRTCs/encoders/connectors without the drivers
private data being accessible.

Remove the module owner field as well; this provides no protection
against the device being unbound.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

imx-drm: remove imx-fb.c

imx-fb.c doesn't need to be separate from imx-drm-core.c - all it is
doing is setting up the minimum and maximum sizes of the scanout
buffers, and setting up the mode_config function pointers.  Move the
contents into imx-drm-core.c and kill this file.

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>