Felix Fietkau [Sun, 14 Mar 2021 23:10:03 +0000 (00:10 +0100)]
mt76: update to the latest version
6a3cf95733e2 mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
ab9045153343 mt76: mt7915: only modify tx buffer list after allocating tx token id
7e1eff676257 mt76: mt7915: fix unused 'mode' variable
8a2e22fcbf69 mt76: mt7921: fix suspend/resume sequence
27a54e8b687f mt76: mt7921: fix memory leak in mt7921_coredump_work
c267322f0bdb mt76: mt7921: switch to new api for hardware beacon filter [v2 update]
fd2c59d9ba46 mt76: mt7921: fixup rx bitrate statistics [v2 update]
bfa8d5a6a9a1 mt76: adjust to upstream API for enabling threaded NAPI
1706fb6c48e8 mt76: mt7663s: fix rx buffer refcounting
c5aca6692c41 mt76: mt7615: enable hw rx-amsdu de-aggregation
9002b0b30aed mt76: mt7615: add rx checksum offload support
8e3f5bfe74f6 mt76: mt7615: add support for rx decapsulation offload
8e3bba8bd3ef mt76: mt7615: fix memory leak in mt7615_coredump_work
760adce29100 mt76: mt7921: fix aggr length histogram
84229a51845a mt76: mt7915: fix aggr len debugfs node
10a95da23cb7 mt76: mt7921: remove unneeded semicolon
2856dc8fb57e mt76: mt7921: fix stats register definitions
1b245e57549d mt76: mt7615: fix TSF configuration
1a2e2965b62b mt76: mt7615: remove hdr->fw_ver check
f60ec1b9473d mt76: mt7615: fix mib stats counter reporting to mac80211
8a5b036af48f mt76: mt7915: fix mib stats counter reporting to mac80211
ee6dbcc64f6d mt76: connac: fix kernel warning adding monitor interface
e46dd240ce72 mt76: check return value of mt76_txq_send_burst in mt76_txq_schedule_list
ddf95ead3bb3 mt76: mt7921: get rid of mt7921_sta_rc_update routine
fd2a51ea9dc8 mt76: mt7921: fix the base of PCIe interrupt
28f53d074bb0 mt76: mt7921: fix the base of the dynamic remap
8d737632b57f mt76: mt7921: check mcu returned values in mt7921_start
5ff25c915e62 mt76: mt7915: add missing capabilities for DBDC
58dd3f26c099 mt76: mt7615: fix CSA notification for DBDC
76f4959107ac mt76: mt7615: stop ext_phy queue when mac reset happens
7de0a0654054 mt76: mt7915: fix CSA notification for DBDC
e9e418fc7eb0 mt76: mt7915: stop ext_phy queue when mac reset happens
477b78301879 mt76: mt7915: fix PHY mode for DBDC
37b4dc0f7595 mt76: mt76x0u: Add support for TP-Link T2UHP(UN) v1
29a04583aecb mt76: mt7915: fix rxrate reporting
a4307e6ba054 mt76: mt7915: fix txrate reporting
256f324f8fcd mt76: mt7915: check mcu returned values in mt7915_ops
638b112188a5 mt76: mt7615: check mcu returned values in mt7615_ops
975cccfa96da mt76: mt7663: fix when beacon filter is being applied
aafe972e95b2 mt76: mt7663s: make all of packets 4-bytes aligned in sdio tx aggregation
0d5b1a702715 mt76: mt7663s: fix the possible device hang in high traffic
00628061b546 mt76: mt7615: add missing capabilities for DBDC
2303e1844afd mt76: mt7915: fix possible deadlock while mt7915_register_ext_phy()
6e2b9d258306 mt76: mt7921: reduce mcu timeouts for suspend, offload and hif_ctrl msg
3cf5afc02955 mt76: introduce mcu_reset function pointer in mt76_mcu_ops structure
9af9622df549 mt76: mt7921: introduce mt7921_run_firmware utility routine.
e12c44a7e165 mt76: mt7921: introduce __mt7921_start utility routine
7b56d5bf6ea0 mt76: dma: introduce mt76_dma_queue_reset routine
a80e50098b51 mt76: dma: export mt76_dma_rx_cleanup routine
e0708e296e27 mt76: mt7921: add wifi reset support
87e09e8482cf mt76: mt7921: remove leftovers from dbdc configuration
cc933b3669f7 mt76: mt7921: remove redundant check on type
ca22cc221ae7 linux-firmware: add firmware for MT7921
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 14 Mar 2021 23:05:42 +0000 (00:05 +0100)]
mac80211: backport upstream patches for driver disconnect
Needed for an mt76 update
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Andre Heider [Tue, 16 Feb 2021 07:21:08 +0000 (08:21 +0100)]
build: prereq: drop support for Python 3.5
The final Python 3.5 release was 3.5.10 in September 2020 [0].
This release series is now End-of-Life (EOL).
The only LTS distribution that still only ships Python 3.5 is Ubuntu 16.04,
which will be EOL in April 2021 [1].
The meson build system bumped their python requirement to 3.6 for the 0.57.0
release. This patch ensures that OpenWrt can update meson while still
relying on the host python.
[0] https://www.python.org/dev/peps/pep-0478/#id4
[1] https://ubuntu.com/about/release-cycle
[2] https://mesonbuild.com/Release-notes-for-0-57-0.html#minimum-required-python-version-updated-to-36
Signed-off-by: Andre Heider <a.heider@gmail.com>
[python3.6+ in README.md]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Spooren [Thu, 4 Feb 2021 23:49:02 +0000 (13:49 -1000)]
scripts,ipkg-build: use realpath for pkg_dir
This allows manual execution of the ipkg-build script even with
releative path.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Paul Spooren [Thu, 4 Feb 2021 23:34:30 +0000 (13:34 -1000)]
scripts,ipkg-build: apply shellcheck
This commit cleans the `ipkg-build` script via changes suggested by
shellcheck. These are mostly word splitting issues.
Remove the definition of GZIP, this adds three "lookups" of the `gzip`
binary but the rest of the build system doesn't seem to use such
improvements neither.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Rosen Penev [Sat, 6 Mar 2021 22:16:55 +0000 (14:16 -0800)]
gettext-full: disable nameless locale define
It seems some packages like transmission and json-glib fail with it
enabled.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Golle [Mon, 15 Mar 2021 00:48:02 +0000 (00:48 +0000)]
opkg: update to git HEAD
5936c4f libopkg: pkg_hash: prefer original packages to satisfy dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 22:55:17 +0000 (22:55 +0000)]
opkg: update to git HEAD
d3a63b3 libopkg: add option to strip ABI versions from listed names
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 22:08:16 +0000 (22:08 +0000)]
uboot-mediatek: also install production image to eMMC
Make installation to eMMC more convenient on the BPi-R64 by also
copying the production image (if valid) from SD Card to eMMC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 19:11:14 +0000 (19:11 +0000)]
mediatek: mt7622: clean up image build
* clean up whitespace to make GPT partitioning more readable
* don't select packages already part of the target default selection
* don't select U-Boot variants (breaks ImageBuilder)
* don't select AHCI on boards without SATA
* don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices
work fine with the in-SoC XHCI host having just kmod-usb3 installed.
* select kmod-btmtkuart for devices with Bluetooth support
* sort DEVICE_PACKAGES
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 19:07:00 +0000 (19:07 +0000)]
uboot-mediatek: select matching U-Boot for board
Instead of building all U-Boot variants by default, build only those
needed by the selected board(s).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Mar 2021 19:04:20 +0000 (19:04 +0000)]
firmware-utils/ptgen: remove unused variable assignment
Discovered by coverty:
CID
1473630: Code maintainability issues (UNUSED_VALUE)
Assigning value from "type_to_guid_and_name(type, &name)" to
"part_guid" here, but that stored value is overwritten before it can
be used.
Remove the now redundant assignment of part_guid which is also set
conditionally later on.
Fixes: 4a078bd135 ("firmware-utils/ptgen: fix partition guid and name")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Sun, 14 Mar 2021 18:22:18 +0000 (19:22 +0100)]
bcm4908: use accepted 5.13 DTS patches
Some patches were slightly cleaned up. One things worth mentioning is
that adding:
phy-mode = "rgmii"
broke SF2 driver. It made it access random register breaking switch
setup.
That's why this commit also adds a quick sf2 fix.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sun, 14 Mar 2021 18:10:18 +0000 (19:10 +0100)]
bcm53xx: backport first 5.13 DTS changes
This adds NVMEM bindings that are needed for proper booting on Linksys
devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tony Ambardar [Tue, 9 Mar 2021 03:16:11 +0000 (19:16 -0800)]
x86: support kernel 5.10
Add linux 5.10 as testing kernel, copy generic/subtarget configs and target
patches from 5.4.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: update target patches for kernel 5.10
Refresh all patches while also dropping:
800-hwmon-w83627ehf-dont-claim-nct677x.patch
which is now upstreamed as:
3207408ab4cb ("hwmon: (w83627ehf) remove nct6775 and nct6776 support")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: refresh 5.10 target config
Refresh config using "make kernel_oldconfig".
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
x86: refresh and test all subtarget configs
Refresh configs using "make kernel_oldconfig CONFIG_TARGET=subtarget".
Build and run-tested using QEMU: x86/64, x86/legacy, x86/generic.
Build-tested only: x86/geode.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
[squashed commits]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tony Ambardar [Mon, 8 Mar 2021 04:22:03 +0000 (20:22 -0800)]
kernel: support new mdio_devres.ko module in 5.10
Add kmod-mdio-devres package and kernel config symbol, and update related
kmod-r8169 and kmod-ixgbe package dependencies.
Build tested module dependencies on x86/64 with CONFIG_ALL_KMODS=y.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Wed, 17 Feb 2021 08:12:44 +0000 (00:12 -0800)]
kernel: add missing config symbols for 5.10
Update generic config to add missing options that prompt during builds.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Álvaro Fernández Rojas [Sun, 14 Mar 2021 13:22:53 +0000 (14:22 +0100)]
bmips: minor ethernet driver cleanups and fixes
Add some minor ethernet driver cleanups and fixes to improve code quality.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Sun, 14 Mar 2021 13:21:48 +0000 (14:21 +0100)]
bmips: reorganize patches
Rename and reorganize backported patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Hauke Mehrtens [Wed, 27 Jan 2021 21:16:11 +0000 (22:16 +0100)]
realtek: Add ZyXEL GS1900-8
The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or
SFP ports, but otherwise similar to the other GS1900 switches.
Specifications
--------------
* Device: ZyXEL GS1900-8 v1.2
* SoC: Realtek RTL8380M 500 MHz MIPS 4KEc
* Flash: Macronix MX25L12835F 16 MiB
* RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM
* Ethernet: 8x 10/100/1000 Mbit
* LEDs: 1 PWR LED (green, not configurable)
1 SYS LED (green, configurable)
8 ethernet port status LEDs (green, SoC controlled)
* Buttons: 1 on-off glide switch at the back (not configurable)
1 reset button at the right side, behind the air-vent
(not configurable)
1 reset button on front panel (configurable)
* Power 12V 1A barrel connector
* UART: 1 serial header (JP2) with populated standard pin connector on
the left side of the PCB, towards the back. Pins are labelled:
+ VCC (3.3V)
+ TX (really RX)
+ RX (really TX)
+ GND
the labelling is done from the usb2serial connector's point of
view, so RX/ TX are mixed up.
Serial connection parameters for both devices: 115200 8N1.
Installation
------------
Instructions are identical to those for the GS1900-10HP and GS1900-8HP.
* Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10).
* Set up a TFTP server on your client and make it serve the initramfs
image.
* Connect serial, power up the switch, interrupt U-boot by hitting the
space bar, and enable the network:
> rtk network on
* Since the GS1900-10HP is a dual-partition device, you want to keep the
OEM firmware on the backup partition for the time being. OpenWrt can
only boot off the first partition anyway (hardcoded in the DTS). To
make sure we are manipulating the first partition, issue the following
commands:
> setsys bootpartition 0
> savesys
* Download the image onto the device and boot from it:
> tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin
> bootm
* Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it:
> sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 24 Feb 2021 21:03:39 +0000 (22:03 +0100)]
realtek: Add generic zyxel_gs1900 image definition
Add a new common device definition for the Zyxel GS1900 line of
switches.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Dominick Grift [Sun, 14 Mar 2021 11:42:29 +0000 (12:42 +0100)]
selinux-policy: update to version v0.8
3d7da7a igmpproxy tidy some loose ends
c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf
5a18967 adds igmpproxy skeleton
7e6a218 logread: support resolving dns names
e39ca8b netifd: add support for /etc/udhcpc.user
7952bd0 odhcp6c: support /etc/odhcp6c.user
ba0eb4e swconfig, fwenv, agent
4556b8a pppd cosmetic
9324d9d pppd: sends AT commands to model using /dev/ttyUSBN
417b14a ttydev: add some more ttyUSB
ed739dc example: dont depend on policycoreutils
97613f9 dropbear: using dropbear as scp: dns name resolving
12c193b dropbear tcp connect ssh ports for scp
c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional
8c5de35 this is a bug
8d5c463 uhttpd rcboot rcdnsmasq
094266e hostapd and wpa_supplicant
aef0bd7 mountroot: maintains /tmp/sysupgrade.tar
24f0406 dropbear: allow it to read tmp.fs files
2901433 firstboot mkfsf2fs rcboot
2c4afb7 blockmount mmc
465ca98 adds industrial i/o (iio) nodedev
82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon
7df78bd ubus: "support" older ubusd versions that run as root
4458bce swconfig: allow using terminal (to print output)
e8d606d sslcert: openssl linked: this shaves off 200 bytes
93afffb jshn ntpdhotplug
0b847f0 wpad: reads /etc/ssl/openssl.cnf
f14ee34 indent fix
a0c7cad mtd, uhttpd, ubus and ntpdhotplug
d74f98f adds a not about checkreqprot requirement in some scenarios
affacce example: add policycoreutils-setfiles for make check
4f944dc kmodloader and fwenv:
efe36a3 netifd: adds a comment/reminder
581b087 more fw_printenv loose ends
30177a4 fw_setenv: needs mtd write access to set and delete env
da28f4c fw_printenv: some minor clean ups
a062053 fw_printenv missing rules
244ba5f blockmount: extroot and /rwm
0745a6a squid: allow squid to run sslcrtd with domain transition
b851df6 squid fix
8c55acd squid: adds certfile and allow connect http but...
b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid)
5ff39bd squid: forgot about luci
5366c97 squid/rcsquid some basic fill in
8743da6 squid skeleton
687a43b adds squid 3128 port to httpproxy port
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Álvaro Fernández Rojas [Mon, 1 Mar 2021 07:21:59 +0000 (08:21 +0100)]
bmips: add experimental ethernet support
This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.
Working devices:
- Comtrend AR-5315u
- Comtrend AR-5387un
- Comtrend VR-3025u
- Comtrend VR-3032u
Not working devices:
- Netgear DGND3700 v2 (no idea on how the external switch is connected)
- Huawei HG556a ver B (BCM6358 needs a separate driveer)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Tony Ambardar [Fri, 12 Mar 2021 01:45:05 +0000 (17:45 -0800)]
tools/libelf: remove unneeded host library
This old ELF library dating to 2009 used to be necessary on MacOS but
is not required for building the kernel or tools since [1]. On Linux
systems, libelf is already an OpenWRT build-system prerequisite [2].
Presence of the older library can mask or conflict with the system libelf
and lead to build errors, as seen compiling Linux kernels since v5.8 or
host tools such as dwarves (e.g. pahole).
Remove the unnecessary tools/libelf library and avoid the related issues.
[1]
5f8e587240 ("build: force disable stack validation during kernel build
on non-linux systems")
[2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites
Tested-by: Rosen Penev <rosenp@gmail.com> (Linux)
Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS)
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Tue, 26 Jan 2021 22:37:04 +0000 (14:37 -0800)]
elfutils: remove host build from target package
Commit
f4da28c301 ("elfutils: Add host build") supplied a libelf host
library to fix a glib2 host build error, but this need was later removed
by
b6212c8769 ("glib2: don't use libelf during host build").
More importantly, there are already two sources for libelf host libraries:
OpenWRT build prerequisites [1] and tools/libelf. A third is not needed.
Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Hannu Nyman [Tue, 9 Mar 2021 15:46:52 +0000 (17:46 +0200)]
busybox: backport fixes for 1.33.0
Backport two fixes for 1.33.0
* history file storing
* traceroute command option parsing
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Daniel Golle [Sat, 13 Mar 2021 19:07:09 +0000 (19:07 +0000)]
uboot-mediatek: import fix for AHCI and enable SATA
Import patch form Frank Wunderlich <frank-w@public-files.de> to fix
build of MediaTek AHCI SATA driver.
Enable that driver on Bananapi BPi-R64.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel González Cabanelas [Sat, 13 Mar 2021 11:57:46 +0000 (12:57 +0100)]
mvebu: LS421DE: make cosmetics changes in dts file
Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS:
- Delete pointless #xxx-cells
- bootargs: replace earlyprintk with earlycon and remove unneeded args.
- Separate pinmux nodes with empty lines.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Alin Nastac [Mon, 1 Mar 2021 08:51:31 +0000 (09:51 +0100)]
xfrm: simplify the check for necessary kernel support
[ -d /sys/module/xfrm_interface ] is enough to check if
CONFIG_XFRM_INTERFACE support was enabled in kernel.
Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
Alin Nastac [Mon, 1 Mar 2021 08:49:43 +0000 (09:49 +0100)]
vti: use alternative way to check if kernel support is enabled
When necessary support is built in kernel, vti protocol support is
not enabled in netifd.
Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
Alin Nastac [Tue, 23 Feb 2021 12:05:09 +0000 (13:05 +0100)]
gre: use alternative way to check if kernel support is enabled
When necessary support is built in kernel, gre protocol support is
not enabled in netifd.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Kabuli Chana [Wed, 10 Mar 2021 02:19:12 +0000 (19:19 -0700)]
kernel: bump 5.10 to 5.10.23
update kernel to 5.10.23, rebase patches, deleted upstreamed patch:
target/linux/generic/backport-5.10/830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch
compile / test - mvebu / mamba, rango
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
[refresh again]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
John Audia [Sun, 7 Mar 2021 12:26:24 +0000 (07:26 -0500)]
kernel: bump 5.4 to 5.4.105
Ran update_kernel.sh in a fresh clone without any existing toolchains.
Removed upstreamed generic-backports:
830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch
831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch
755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch
Build system: x86_64
Build-tested: ipq806x/R7800
Run-tested: ipq806x/R7800
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
[squash patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Sat, 13 Mar 2021 14:59:33 +0000 (14:59 +0000)]
mediatek: image: don't use 'M' unit as dd may not support that
dd on Mac OS X apparently fails when using 'M' unit for bs.
dd: bs: illegal numeric value
Use 'k' unit instead for 'pad-to' to fix that.
Reported-by: Georgi Valkov <gvalkov@abv.bg>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 13 Mar 2021 13:38:25 +0000 (13:38 +0000)]
uboot-mediatek: fix build on Mac OS X
Copy patch added to uboot-sunxi by commit
3cc57ba462
("uboot-sunxi: add missing type __u64") also to uboot-mediatek.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Fri, 12 Mar 2021 20:08:24 +0000 (21:08 +0100)]
bcm47xx: make WGT634U NVRAM patch apply again
Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Fri, 12 Mar 2021 13:45:19 +0000 (14:45 +0100)]
kernel: add compatibility with upstream threaded NAPI patch
Enable threading if dev->threaded is set. This will be used to bring mt76 back
in sync with upstream
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 8 Mar 2021 16:20:20 +0000 (17:20 +0100)]
kernel: update 5.10 flow offload patches
Includes PPPoE support and VLAN related fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Fri, 12 Mar 2021 17:30:01 +0000 (18:30 +0100)]
kernel: add pending mtd patches adding NVMEM support
It's meant to provide upstream support for mtd & NVMEM. It's required
e.g. for reading MAC address from mtd partition content. It seems to be
in a final shape so it's worth testing.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 16:37:59 +0000 (17:37 +0100)]
kernel: move mtd ofpart accepted patch
Move upstream patch to the backport directory.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 16:36:58 +0000 (17:36 +0100)]
kernel: add two more missed 5.10 backports
Those were added to 5.4 but missed while introducing 5.10 kernel.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 17:10:09 +0000 (18:10 +0100)]
bcm53xx: initialize NVRAM from NVMEM driver
NVRAM access may be needed early in boot process. Reading it using mtd
happens quite late in the init process. Add NVRAM initialization to the
NVMEM driver which comes up early and depends on IO mapping only.
This is required by Linksys devices which use NVRAM content for proper
partitioning (detecting current firmware partition).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Mar 2021 17:07:57 +0000 (18:07 +0100)]
kernel: backport Broadcom NVRAM driver cleanups
Refactoring of bcm47xx_nvram driver. It's used by bcm47xx and bcm53xx.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Álvaro Fernández Rojas [Fri, 12 Mar 2021 13:29:51 +0000 (14:29 +0100)]
bmips: switch to upstream bcm2835-rng reset patch
This patch has been accepted upstream.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Daniel Golle [Thu, 11 Mar 2021 21:52:07 +0000 (21:52 +0000)]
uboot-mediatek: update configs for MT7622 devies
* make sure USB 2.0 works (useful for UEFI-booting eg. memtest86)
* include more useful U-Boot config options on BPi-R64.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Bjørn Mork [Thu, 11 Mar 2021 12:35:38 +0000 (13:35 +0100)]
realtek: drop ethtool log noise
Demote a number of debugging printk's to pr_debug to avoid log
nosie. Several of these functions are called as a result of
userspace activity. This can cause a lot of log noise when
userspace does periodic polling.
Most of this could probably be removed completely, but let's
keep it for now since these drivers are still in development.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Daniel Golle [Sat, 20 Feb 2021 13:04:38 +0000 (13:04 +0000)]
uboot-mediatek: update to 2021.04-rc3 with MediaTek's patches
MediaTek published their current U-Boot patchset on github:
https://github.com/mtk-openwrt/u-boot/commits/mtksoc
Import the platform patches from there (`00-mtk-*.patch`), arrange,
them nicely, drop no longer needed local patches and rebase on top of
U-Boot 2021.04-rc3.
Tested and works well on Linksys E8450 (snand-1ddr) as well as
Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 11 Mar 2021 16:01:32 +0000 (16:01 +0000)]
arm-trusted-firmware-mediatek: update to 2021-03-10
Most prominently this adds changes which allow replacing the binary-
only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit).
This fixes build on non-Linux and/or non-x86 platforms.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 11 Mar 2021 16:00:20 +0000 (16:00 +0000)]
tools: mkimage: add patches for 64-bit MediaTek BootROM
Add patches for mkimage to allow using it instead of the binary-only
'bromimage' tool to generate bl2 for MT7622.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 11 Mar 2021 00:23:11 +0000 (00:23 +0000)]
rpcd: update to git HEAD
d3f2041 uci: manually clear uci_ptr flags after uci_delete() operations
ccb7517 sys: packagelist: drop ABI version from package name
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 11 Mar 2021 00:22:12 +0000 (00:22 +0000)]
opkg: update to git HEAD
d71856a pkg: pass-through ABIVersion to status file
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rafał Miłecki [Wed, 10 Mar 2021 22:22:18 +0000 (23:22 +0100)]
bcm53xx: backport NVMEM NVRAM driver
It supports NVRAM access described using DT binding. Right now NVRAM
data is exposed using /sys/bus/nvmem/ only.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 10 Mar 2021 21:28:30 +0000 (22:28 +0100)]
Revert "bcm53xx: add support for reading NVRAM based on DT mapping"
This reverts commit
b0376462c164344d6be9fe1568a9f13ffd8fbb16. Those
changes were rejected and were replaced with an NVMEM driver.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hans Dedecker [Wed, 10 Mar 2021 19:48:02 +0000 (20:48 +0100)]
glibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)
a151f2e05a nscd: Fix double free in netgroupcache [BZ #27462]
ee9f98d9ca x86: Set minimum x86-64 level marker [BZ #27318]
3e880d7337 nss: Re-enable NSS module loading after chroot [BZ #27389]
71b2463f61 x86: Add CPU-specific diagnostics to ld.so --list-diagnostics
a1eb3915e7 x86: Automate generation of PREFERRED_FEATURE_INDEX_1 bitfield
33dc1dd602 ld.so: Implement the --list-diagnostics option
8d4241b897 string: Work around GCC PR 98512 in rawmemchr
6efa2d44c8 S390: Add new hwcap values.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Rui Salvaterra [Tue, 9 Mar 2021 22:22:09 +0000 (22:22 +0000)]
netifd: add a udhcpc.user placeholder script
Document the existence of this feature. This allows the user to execute a script
at each DHCPv4 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Rui Salvaterra [Tue, 9 Mar 2021 22:16:05 +0000 (22:16 +0000)]
odhcp6c: add a odhcp6c.user placeholder script
Document the existence of this feature. This allows the user to execute a script
at each DHCPv6 event. This is useful, for example, as an ad-hoc way to update a
DDNS entry when (and only when) required.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Paul Spooren [Mon, 8 Mar 2021 04:09:32 +0000 (18:09 -1000)]
include: store ABIVersion in Packages index
With the existence of ABI versions there is no clean way to determine
the package name without an attached ABI version. The Packages index is
stored on device to know what packages are installed.
The ABIVersion was recently removed in
c921650382 "build: drop ABI
version from metadata", while ABI versions still exists. This becomes a
problem if a user tries to export installed packages via `ubus call
rpcd-sys packagelist` which would return package names including the ABI
version. Trying to find these packages in a later release with changes
ABI version is impossible.
This commits adds the `ABIVersion` field again. Knowing both the
combined (SourceName + ABIVersion) and the `ABIVersion` it is possible
to calculate the package `SourceName` without storing it in the
on-device package list.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Daniel Golle [Mon, 8 Mar 2021 21:27:07 +0000 (21:27 +0000)]
arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NAND
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Dominick Grift [Sat, 6 Mar 2021 20:02:41 +0000 (21:02 +0100)]
checkpolicy: update to version 3.2
521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1
42ae834a libsepol,checkpolicy: optimize storage of filename transitions
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Dominick Grift [Sat, 6 Mar 2021 20:02:40 +0000 (21:02 +0100)]
secilc: update to version 3.2
49ff851c secilc: fixes cil_role_statements.md example
03881703 secilc/docs: add custom color theme
4c8d6094 secilc/docs: add syntax highlighting for secil
057d72af secilc/docs: use fenced code blocks for cil examples
e8bcdb84 cil_network_labeling_statements: fixes nodecon examples
eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes
9e9b8103 secilc/docs: document expandtypeattribute
fbe1e526 Update the cil docs to match the current behaviour.
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Dominick Grift [Sat, 6 Mar 2021 20:02:39 +0000 (21:02 +0100)]
policycoreutils: update to version 3.2
d464187c policycoreutils: sestatus belongs to bin not sbin
d59932a7 policycoreutils: Resolve path in restorecon_xattr
5682c0d5 policycoreutils/fixfiles.8: add missing file systems and merge check and verify
57dd1f65 policycoreutils/setfiles: Drop unused nerr variable
be7f54cb setfiles: drop ABORT_ON_ERRORS and related code
9207823c setfiles: Do not abort on labeling error
c064d214 selinux_config(5): add a note that runtime disable is deprecated
8bc865e1 newrole: support cross-compilation with PAM and audit
ba2d6c10 fixfiles: correctly restore context of mountpoints
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Dominick Grift [Sat, 6 Mar 2021 20:02:38 +0000 (21:02 +0100)]
libsemanage: update to version 3.2
c35919a7 libsemanage: sync filesystem with sandbox
5b05e829 Revert "libsemanage/genhomedircon: check usepasswd"
edae9275 libsemanage: Free contents of modkey in semanage_direct_remove
ce46daab libsemanage/genhomedircon: check usepasswd
6ebb35d2 libsemanage: Bump libsemanage.so version
c08b73d7 libsemanage: Drop deprecated functions
b46406de libsemanage: Remove legacy and duplicate symbols
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Dominick Grift [Sat, 6 Mar 2021 20:02:37 +0000 (21:02 +0100)]
libselinux: update to version 3.2
142826a3 libselinux: fix segfault in add_xattr_entry()
398d2cee libselinux: rename gettid() to something which never conflicts with the libc
8f0f0a28 selinux(8,5): Describe fcontext regular expressions
9cc6b5cf libselinux/getconlist: report failures
156dd0de libselinux: update getseuser
e2dca5df libselinux: accept const fromcon in get_context API
da4829d0 libselinux: Always close status page fd
45b15c22 selinux(8): explain that runtime disable is deprecated
3c16aaef selinux(8): mark up SELINUX values
c2a58cc5 libselinux: LABEL_BACKEND_ANDROID add option to enable
db0f2f38 libselinux: Add build option to disable X11 backend
4a142ac4 libsepol: Bump libsepol.so version
d23342a9 libselinux: convert matchpathcon to selabel_lookup()
7ef5b185 libselinux: Change userspace AVC setenforce and policy load messages to audit format.
f5d644c7 libselinux: Add additional log callback details in man page for auditing.
075f9cfe libselinux: Fix selabel_lookup() for the root dir.
a4149e0e libselinux: Add new log callback levels for enforcing and policy load notices.
a63f93d8 libselinux: initialize last_policyload in selinux_status_open()
ef902db9 libselinux: safely access shared memory in selinux_status_updated()
9e4480b9 libselinux: Remove trailing slash on selabel_file lookups.
21fb5f20 libselinux: use full argument specifiers for security_check_context in man page
e7abd802 libselinux: fix build order
05bdc031 libselinux: use kernel status page by default
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Dominick Grift [Sat, 6 Mar 2021 20:02:36 +0000 (21:02 +0100)]
libsepol: update to version 3.2
a9e0004f libsepol: invalidate the pointer to the policydb if policydb_init fails
6238e025 libsepol/cil: fix NULL pointer dereference in cil_fill_ipaddr
b69d77bc libsepol/cil: handle SID without assigned context when writing policy.conf
0861c659 libsepol: Validate policydb values when reading binary policy
8f5409cf libsepol: Create function ebitmap_highest_set_bit()
0451adeb libsepol/cil: Destroy disabled optional blocks after pass is complete
32f8ed3d libsepol/cil: introduce intermediate cast to silence -Wvoid-pointer-to-enum-cast
4662bdc1 libsepol/cil: be more robust when encountering <src_info>
6b561058 libsepol/cil: fix NULL pointer dereference with empty macro argument
0d0e47c7 libsepol/cil: Fix integer overflow in the handling of hll line marks
1b36ace2 libsepol: include header files in source files when matching declarations
1f1fa9d4 libsepol: uniformize prototypes of sepol_mls_contains and sepol_mls_check
72a88d75 libsepol: remove unused files
eba0ffee libsepol/cil: Fix heap-use-after-free when using optional blockinherit
1048f8d3 libsepol/cil: unlink blockinherit->block link when destroying a block
b3202918 libsepol/cil: fix memory leak when a constraint expression is too deep
f0d98f83 libsepol/cil: Fix heap-use-after-free in __class_reset_perm_values()
5d021d66 libsepol/cil: Update symtab nprim field when adding or removing datums
34bd9a9d libsepol: destroy filename_trans list properly
bdf4e332 libsepol/cil: fix NULL pointer dereference when parsing an improper integer
b7ea65f5 libsepol/cil: destroy perm_datums when __cil_resolve_perms fails
228c06d9 libsepol/cil: fix out-of-bound read in cil_print_recursive_blockinherit
a25d9104 libsepol/cil: constify some strings
e2d01842 libsepol/cil: propagate failure of cil_fill_list()
6c8fca10 libsepol/cil: do not add a stack variable to a list
38a09b74 libsepol/cil: fix NULL pointer dereference when using an unused alias
3c357285 libsepol/cil: remove useless print statement
90809674 libsepol/cil: always destroy the lexer state
d16a1e46 libsepol/cil: Use the macro FLAVOR() whenever possible
2aac859a libsepol/cil: Use the macro NODE() whenever possible
d317b470 libsepol/cil: Remove unnecessary assignment in cil_resolve_name_keep_aliases()
9b9761cf libsepol/cil: Remove unused field from struct cil_args_resolve
e257d4c7 libsepol/cil: Get rid of unnecessary check in cil_gen_node()
ebba2b00 libsepol/cil: cil_tree_walk() helpers should use CIL_TREE_SKIP_*
89dab467 libsepol: free memory when realloc() fails
2d353bd5 libsepol/cil: Give error for more than one true or false block
4a142ac4 libsepol: Bump libsepol.so version
506c7b95 libsepol: Drop deprecated functions
ae58e84b libsepol: Get rid of the old and duplicated symbols
c97d63c6 libsepol: silence potential NULL pointer dereference warning
64387cb3 libsepol: drop confusing BUG_ON macro
521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1
a152653b libsepol/cil: Fix neverallow checking involving classmaps
734e4beb libsepol/cil: Validate conditional expressions before adding to binary policy
685f577a libsepol/cil: Validate constraint expressions before adding to binary policy
8206b8cb libsepol: implement POLICYDB_VERSION_COMP_FTRANS
42ae834a libsepol,checkpolicy: optimize storage of filename transitions
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Álvaro Fernández Rojas [Mon, 8 Mar 2021 16:47:10 +0000 (17:47 +0100)]
bmips: automatically detect RAM size
Introduce new patch for automatically detecting RAM size.
Some boards have a different amount of RAM depending on the HW revision.
Therefore, automatically detecting the RAM size instead of hard-coding it will
reduce the number of device definitions.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 8 Mar 2021 16:45:33 +0000 (17:45 +0100)]
bmips: improve CPU frequency patch
Fixes BCM6358 address and calculations.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Daniel González Cabanelas [Sat, 6 Mar 2021 18:59:19 +0000 (19:59 +0100)]
bcm63xx: AD1018-nor: add NAND flash
The Sercomm AD1018 has a NAND flash. We recently added support for NANDs
in this target.
Use the internal NAND as additional storage.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Álvaro Fernández Rojas [Mon, 8 Mar 2021 09:46:06 +0000 (10:46 +0100)]
gitignore: add .vscode for VS Code users
For Visual Studio Code users, .vscode is created inside the workspace.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 8 Mar 2021 09:42:25 +0000 (10:42 +0100)]
bmips: dts: comestic changes
Improve and refactor device tree files.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Mon, 8 Mar 2021 09:12:42 +0000 (10:12 +0100)]
bmips: remove unneeded console from bootargs
console parameter is no longer needed after latest procd update.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Álvaro Fernández Rojas [Fri, 5 Mar 2021 16:51:39 +0000 (17:51 +0100)]
bmips: automatically detect CPU frequency
Some BCM63xx SoCs support multiple CPU frequencies depending on HW
configuration.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Daniel Golle [Mon, 8 Mar 2021 00:10:51 +0000 (00:10 +0000)]
procd: update to git HEAD
945d0d7 utils: fix C style in header file
2cfc26f inittab: detect active console from kernel if no console= specified
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Georgi Valkov [Tue, 2 Mar 2021 10:41:10 +0000 (12:41 +0200)]
bpftools: fix param order for install on macOS
Fix: bpftools 5.11.2 does not compile on macOS, because the -m option
was placed between src and dst. Corrected by moving -m 644 before src.
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tony Ambardar [Mon, 1 Mar 2021 09:07:45 +0000 (01:07 -0800)]
bpftools: fix libbpf pkgconfig file
The pkgconfig file hardcodes a host library directory which cannot be
overridden by OpenWrt during builds. Use SED to fix this and potential
include directory problems, as is done with several other packages.
This fixes a strange issue intermittently seen building iproute2 on the
oxnas target:
iptables modules directory: /usr/lib/iptables
libc has setns: yes
SELinux support: no
libbpf support: no
libbpf version 0.3.0 is too low, please update it to at least 0.1.0
LIBBPF_FORCE=on set, but couldn't find a usable libbpf
Fixes: 2f0d672088c3 ("bpftools: add utility and library packages
supporting eBPF usage")
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Daniel Golle [Sun, 7 Mar 2021 18:15:50 +0000 (18:15 +0000)]
mediatek: remove no longer needed sysupgrade hack
Keeping configuration is now handled in fstools like for other types
of flash as well.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Sat, 6 Mar 2021 19:22:15 +0000 (20:22 +0100)]
mediatek: mt7622: remove execute bit and shebang from 01_leds
This was added recently and thus overlooked in
85b1f4d8ca2d
("treewide: remove execute bit and shebang from board.d files").
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Sat, 6 Mar 2021 19:04:15 +0000 (19:04 +0000)]
ipq806x: work-around borked QCA SDK bootloader
The bootloader of many ipq806x boards seems to require the config node
of the FIT image to be 'config@1' (or a secific different value).
This requirement used to be implicitely satisfied because OpenWrt used
to also call the configuration node inside a FIT image 'config@1'.
However, as recent U-Boot now prohibits the use of the '@' symbol as
part of node names, this was changed by
commit
5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes")
Explicitely restore the default name of the configuration node to
'config@1' on ipq806x.
(ipq807x is unaffected as DEVICE_DTS_CONFIG default is set
"config@hk01" in target/linux/ipq807x/image/Makefile)
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 6 Mar 2021 18:59:16 +0000 (18:59 +0000)]
ipq40xx: work-around borked QCA SDK bootloader
The bootloader of many ipq40xx boards seems to require the config node
of the FIT image to be 'config@1' (or a secific different value).
This requirement used to be implicitely satisfied because OpenWrt used
to also call the configuration node inside a FIT image 'config@1'.
However, as recent U-Boot now prohibits the use of the '@' symbol as
part of node names, this was changed by
commit
5ec60cbe9d ("scripts: mkits.sh: replace @ with - in nodes")
Explicitely restore the default name of the configuration node to
'config@1' on ipq40xx.
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 6 Mar 2021 18:38:30 +0000 (18:38 +0000)]
mediatek: disable RTC on Bananapi R64 and refresh patches
The in-SoC RTC of the Bananapi R64 is more disruptive than useful
without a battery connected. Disable it to not have Linux use the
RTC provided time 2000-01-01 00:00:00 after power-loss.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Thu, 25 Feb 2021 10:54:43 +0000 (11:54 +0100)]
treewide: make AddDepends/usb-serial selective
Make packages depending on usb-serial selective, so we do not have
to add kmod-usb-serial manually for every device.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 26 Feb 2021 13:43:50 +0000 (14:43 +0100)]
treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.
Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.
Note:
This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Ilya Lipnitskiy [Sun, 28 Feb 2021 07:17:47 +0000 (23:17 -0800)]
ramips: 5.10: refresh configs
Run-tested on Ubiquiti EdgeRouter X.
Compile tested on all other subtargets.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Sat, 20 Feb 2021 03:11:14 +0000 (19:11 -0800)]
ramips: 5.10: port and refresh patches, ralink drv
Enable testing kernel.
Fix compile errors by using new kernel APIs.
Fix fuzz by manually editing patches to ensure the code goes in the
right place.
For 721-NET-no-auto-carrier-off-support.patch, revert upstream commit
a307593a6 to keep the OpenWrt ralink driver operational.
Add mt7621-pci-phy patch to select REGMAP_MMIO as discussed in PR #3693
and #3952.
Run automatic quilt refresh on the rest.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Sun, 28 Feb 2021 00:00:24 +0000 (16:00 -0800)]
ramips: 5.10: rename patches to follow guide
Rename patches to follow the 3-digit classification from the OpenWrt
Developer Guide.
https://openwrt.org/docs/guide-developer/build-system/use-patches-with-buildsystem#naming_patches
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Sat, 20 Feb 2021 03:04:38 +0000 (19:04 -0800)]
ramips: 5.10: delete upstreamed patches
0098-disable_cm.patch is not needed because upstream fixed CM handling.
The rest are straightforward removals of upstreamed patches.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Sat, 20 Feb 2021 02:59:29 +0000 (18:59 -0800)]
ramips: 5.10: copy patches from 5.4
Strict copy, no changes made.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Sat, 27 Feb 2021 23:12:21 +0000 (15:12 -0800)]
ramips: copy config-5.4 to config-5.10
Strict copy, no changes made.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Adrian Schmutzler [Sat, 6 Mar 2021 10:23:38 +0000 (11:23 +0100)]
Revert "ramips: add support for kernel 5.10"
This reverts commit
b4aad29a1d7ad77d67073c1c54b28c429c64ed9b.
This was accidentally folded into a single commit. Remove it and
apply it properly again.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Sat, 6 Mar 2021 04:18:10 +0000 (04:18 +0000)]
kernel: fix kmod-usb3 on platforms without PCI
Partially restore the wild-card matching for kmod-usb3 modules to fix
build on platforms without PCI which otherwise file, as seen on
buildbot:
ERROR: module '[...]/linux-5.4.102/drivers/usb/host/xhci-pci.ko' is missing.
modules/usb.mk:1675: recipe for target '[...]/kmod-usb3_5.4.102-1_mips_mips32.ipk' failed
Fixes: 7bda2e9aba ("kernel: fix kmod-usb3 dependencies")
Fixes: be23f9818a ("apm821xx: add support for kernel 5.10")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ilya Lipnitskiy [Sat, 6 Mar 2021 02:28:43 +0000 (18:28 -0800)]
apm821xx, mt7621, oxnas, rockchip, zynq: remove PLUGIN_HOSTCC
This config symbol should not be defined in target configs.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Sat, 6 Mar 2021 02:28:42 +0000 (18:28 -0800)]
kernel: generic: filter out CONFIG_PLUGIN_HOSTCC
It appears to be an automatic Kconfig symbol that varies depending on
the host platform. There is no need to define it in target configs, so
filter it out.
Also sort config-filter entries alphabetically.
Cc: Adrian Schmutzler <mail@adrianschmutzler.de>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Daniel Golle [Sat, 6 Mar 2021 03:28:52 +0000 (03:28 +0000)]
arm-trusted-firmware-mediatek: prune now uneeded declarations
Remove unneeded delcarations form package Makefile now that everything
comes from github.com/mtk-openwrt upstream.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ilya Lipnitskiy [Sat, 6 Mar 2021 02:06:02 +0000 (18:06 -0800)]
kernel: fix kmod-usb3 dependencies
Adding CONFIG_USB_XHCI_PCI_RENESAS to KCONFIG made it so it was set
for all targets that included kmod-usb3, not just the intended
apm821xx/nand. xhci-pci has a dependency on xhci-pci-renesas if
CONFIG_USB_XHCI_PCI_RENESAS is set, breaking kmod-usb3 builds on
Linux 5.10 on all other targets.
Rework the dependencies by breaking out xhci-hcd, xhci-mtk, and
xhci-pci-renesas into new hidden kernel modules and setting kmod-usb3
dependencies properly.
Tested by building mt7621 and apm821xx/nand with kmod-usb3 on Linux 5.10
Fixes: be23f981 ("apm821xx: add support for kernel 5.10")
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Daniel Golle [Fri, 5 Mar 2021 23:53:51 +0000 (23:53 +0000)]
arm-trusted-firmware-mediatek: don't select DDR3_FLYBY for 1ddr
DDR3_FLYBY has accidentally been set also for the 1-chip variant which
lead to broken, unbootable images. Fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Ilya Lipnitskiy [Sat, 27 Feb 2021 23:12:21 +0000 (15:12 -0800)]
ramips: add support for kernel 5.10
Enable testing kernel.
Delete upstreamed patches:
0098-disable_cm.patch can be dropped, upstream fixed CM handling.
Fix compile errors by using new kernel APIs.
Fix fuzz by manually editing patches to ensure the code goes in the
right place.
For 721-NET-no-auto-carrier-off-support.patch, revert upstream commit
a307593a6 to keep the OpenWrt ralink driver operational.
Add mt7621-pci-phy patch to select REGMAP_MMIO as discussed in PR #3693
and #3952.
Rename patches to follow the 3-digit classification from the OpenWrt
Developer Guide.
Run automatic quilt refresh.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Fri, 5 Mar 2021 20:07:40 +0000 (12:07 -0800)]
ramips: 5.4: refresh configs
Automatic refresh by running make kernel_oldconfig on each target.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Christian Lamparter [Sat, 20 Feb 2021 16:44:12 +0000 (17:44 +0100)]
apm821xx: add support for kernel 5.10 for testing
This patch copies over refreshed patches from 5.4.
- dropped crypto patches (they got upstreamed)
- dropped renesas USB 3 firmware loader (they got upstreamed)
- NAND now needs extra device-properties for ECC settings.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Daniel Golle [Fri, 5 Mar 2021 19:09:10 +0000 (19:09 +0000)]
mediatek: mt7622: bpi-r64: allow MAC addresses to be inherited
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 5 Mar 2021 19:07:54 +0000 (19:07 +0000)]
uboot-mediatek: improve BPi-R64 support
* allow MAC address from U-Boot env to be inhertied
* allow eMMC installation to succeed also without recovery present
on the SD Card.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Thu, 4 Mar 2021 19:51:39 +0000 (19:51 +0000)]
kernel: bump 5.10 to 5.10.20
Also add a new kconfig symbol (CONFIG_KCMP) to the generic config,
disabling the SYS_kcmp syscall (it was split from
CONFIG_CHECKPOINT_RESTORE, which is disabled by default, so the
previous behaviour is kept).
Removed (upstreamed) patches:
070-net-icmp-pass-zeroed-opts-from-icmp-v6-_ndo_send-bef.patch
081-wireguard-device-do-not-generate-ICMP-for-non-IP-pac.patch
082-wireguard-queueing-get-rid-of-per-peer-ring-buffers.patch
083-wireguard-kconfig-use-arm-chacha-even-with-no-neon.patch
830-v5.12-0002-usb-serial-option-update-interface-mapping-for-ZTE-P685M.patch
Manually rebased patches:
313-helios4-dts-status-led-alias.patch
104-powerpc-mpc85xx-change-P2020RDB-dts-file-for-OpenWRT.patch
Run tested:
ath79 (TL-WDR3600)
mvebu (Turris Omnia)
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
projects / openwrt / staging / wigyori.git / log