git.openwrt.org Git - openwrt/staging/blogic.git/log

lib/rbtree: set successor's parent unconditionally

Both in Case 2 and 3, we exchange n and s.  This mean no matter whether
child2 is NULL or not, successor's parent should be assigned to node's.

This patch takes this step out to make it explicit and reduce the
ambiguity.

Besides, this step reduces some symbol size like rb_erase().

   KERN_CONFIG       upstream       patched
   OPT_FOR_PERF      877            870
   OPT_FOR_SIZE      635            621

Link: http://lkml.kernel.org/r/20191028021442.5450-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: pca953x: utilize the for_each_set_clump8 macro

Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/3543ffc3668ad4ed4c00e8ebaf14a5559fd6ddf2.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: max3191x: utilize the for_each_set_clump8 macro

Replace verbose implementation in get_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/c2b1ed62caf6fce6e5681809a50c05ce6acdf2a6.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: pisosr: utilize the for_each_set_clump8 macro

Replace verbose implementation in get_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/8a39ee772247d4b7d752b32dbacc06c1cdcb60b5.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thermal: intel: intel_soc_dts_iosf: Utilize for_each_set_clump8 macro

Utilize for_each_set_clump8 macro, and the bitmap_set_value8 and
bitmap_get_value8 functions, where appropriate. In addition, remove the
now unnecessary temp_mask and temp_shift members of the
intel_soc_dts_sensor_entry structure.

Link: http://lkml.kernel.org/r/2d3c74e9a00a52954f31d19e04623a7f4bc85520.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: 74x164: utilize the for_each_set_clump8 macro

Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/7ea2df7182a50a1136ca36edc46dffcb2446fd27.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: uniphier: utilize for_each_set_clump8 macro

Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.

Link: http://lkml.kernel.org/r/5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: pcie-idio-24: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/d5d22fa9809dcf8330f4381dbe7e7ca37990e79f.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: pci-idio-16: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/b30f131b4634caf5a70f12e01496f71631a17305.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: ws16c48: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/7a0d2c964e7f2d289b16c63ff6b06fc1f4c50d4d.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: gpio-mm: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/0de53d7021b2d6db10294473cd8a1b6102bcec94.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: 104-idi-48: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/b0631b6d489f85008480399df283ccd33ecfe310.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: 104-dio-48e: utilize for_each_set_clump8 macro

Replace verbose implementation in get_multiple/set_multiple callbacks
with for_each_set_clump8 macro to simplify code and improve clarity.

Link: http://lkml.kernel.org/r/08b9c9a3e75ef1ab0d172223d10a1661f2b43fe2.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_bitmap.c: add for_each_set_clump8 test cases

The introduction of the for_each_set_clump8 macro warrants test cases to
verify the implementation. This patch adds test case checks for whether
an out-of-bounds clump index is returned, a zero clump is returned, or
the returned clump value differs from the expected clump value.

Link: http://lkml.kernel.org/r/febc0fb8151e3e3fdd61c34da9193d1c4d7e6c12.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bitops: introduce the for_each_set_clump8 macro

Pach series "Introduce the for_each_set_clump8 macro", v18.

While adding GPIO get_multiple/set_multiple callback support for various
drivers, I noticed a pattern of looping manifesting that would be useful
standardized as a macro.

This patchset introduces the for_each_set_clump8 macro and utilizes it
in several GPIO drivers.  The for_each_set_clump macro8 facilitates a
for-loop syntax that iterates over a memory region entire groups of set
bits at a time.

For example, suppose you would like to iterate over a 32-bit integer 8
bits at a time, skipping over 8-bit groups with no set bit, where
XXXXXXXX represents the current 8-bit group:

    Example:        10111110 00000000 11111111 00110011
    First loop:     10111110 00000000 11111111 XXXXXXXX
    Second loop:    10111110 00000000 XXXXXXXX 00110011
    Third loop:     XXXXXXXX 00000000 11111111 00110011

Each iteration of the loop returns the next 8-bit group that has at
least one set bit.

The for_each_set_clump8 macro has four parameters:

    * start: set to the bit offset of the current clump
    * clump: set to the current clump value
    * bits: bitmap to search within
    * size: bitmap size in number of bits

In this version of the patchset, the for_each_set_clump macro has been
reimplemented and simplified based on the suggestions provided by Rasmus
Villemoes and Andy Shevchenko in the version 4 submission.

In particular, the function of the for_each_set_clump macro has been
restricted to handle only 8-bit clumps; the drivers that use the
for_each_set_clump macro only handle 8-bit ports so a generic
for_each_set_clump implementation is not necessary.  Thus, a solution
for large clumps (i.e.  those larger than the width of a bitmap word)
can be postponed until a driver appears that actually requires such a
generic for_each_set_clump implementation.

For what it's worth, a semi-generic for_each_set_clump (i.e.  for clumps
smaller than the width of a bitmap word) can be implemented by simply
replacing the hardcoded '8' and '0xFF' instances with respective
variables.  I have not yet had a need for such an implementation, and
since it falls short of a true generic for_each_set_clump function, I
have decided to forgo such an implementation for now.

In addition, the bitmap_get_value8 and bitmap_set_value8 functions are
introduced to get and set 8-bit values respectively.  Their use is based
on the behavior suggested in the patchset version 4 review.

This patch (of 14):

This macro iterates for each 8-bit group of bits (clump) with set bits,
within a bitmap memory region.  For each iteration, "start" is set to
the bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump".  Additionally, the
bitmap_get_value8 and bitmap_set_value8 functions are introduced to
respectively get and set an 8-bit value in a bitmap memory region.

[gustavo@embeddedor.com: fix potential sign-extension overflow]
Link: http://lkml.kernel.org/r/20191015184657.GA26541@embeddedor
[akpm@linux-foundation.org: s/ULL/UL/, per Joe]
[vilhelm.gray@gmail.com: add for_each_set_clump8 documentation]
Link: http://lkml.kernel.org/r/20191016161825.301082-1-vilhelm.gray@gmail.com
Link: http://lkml.kernel.org/r/893c3b4f03266c9496137cc98ac2b1bd27f92c73.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sys.c: avoid copying possible padding bytes in copy_to_user

Initialization is not guaranteed to zero padding bytes so use an
explicit memset instead to avoid leaking any kernel content in any
possible padding bytes.

Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/profile.c: use cpumask_available to check for NULL cpumask

When building with clang + -Wtautological-pointer-compare, these
instances pop up:

  kernel/profile.c:339:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
          if (prof_cpu_mask != NULL)
              ^~~~~~~~~~~~~    ~~~~
  kernel/profile.c:376:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
          if (prof_cpu_mask != NULL)
              ^~~~~~~~~~~~~    ~~~~
  kernel/profile.c:406:26: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
          if (!user_mode(regs) && prof_cpu_mask != NULL &&
                                ^~~~~~~~~~~~~    ~~~~
  3 warnings generated.

This can be addressed with the cpumask_available helper, introduced in
commit f7e30f01a9e2 ("cpumask: Add helper cpumask_available()") to fix
warnings like this while keeping the code the same.

Link: https://github.com/ClangBuiltLinux/linux/issues/747
Link: http://lkml.kernel.org/r/20191022191957.9554-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/notifier.c: remove blocking_notifier_chain_cond_register()

blocking_notifier_chain_cond_register() does not consider system_booting
state, which is the only difference between this function and
blocking_notifier_cain_register(). This can be a bug and is a piece of
duplicate code.

Delete blocking_notifier_chain_cond_register()

Link: http://lkml.kernel.org/r/1568861888-34045-4-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/notifier.c: remove notifier_chain_cond_register()

The only difference between notifier_chain_cond_register() and
notifier_chain_register() is the lack of warning hints for duplicate
registrations. Use notifier_chain_register() instead of
notifier_chain_cond_register() to avoid duplicate code

Link: http://lkml.kernel.org/r/1568861888-34045-3-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/notifier.c: intercept duplicate registrations to avoid infinite loops

Registering the same notifier to a hook repeatedly can cause the hook
list to form a ring or lose other members of the list.

  case1: An infinite loop in notifier_chain_register() can cause soft lockup
          atomic_notifier_chain_register(&test_notifier_list, &test1);
          atomic_notifier_chain_register(&test_notifier_list, &test1);
          atomic_notifier_chain_register(&test_notifier_list, &test2);

  case2: An infinite loop in notifier_chain_register() can cause soft lockup
          atomic_notifier_chain_register(&test_notifier_list, &test1);
          atomic_notifier_chain_register(&test_notifier_list, &test1);
          atomic_notifier_call_chain(&test_notifier_list, 0, NULL);

  case3: lose other hook test2
          atomic_notifier_chain_register(&test_notifier_list, &test1);
          atomic_notifier_chain_register(&test_notifier_list, &test2);
          atomic_notifier_chain_register(&test_notifier_list, &test1);

  case4: Unregister returns 0, but the hook is still in the linked list,
         and it is not really registered. If you call
         notifier_call_chain after ko is unloaded, it will trigger oops.

If the system is configured with softlockup_panic and the same hook is
repeatedly registered on the panic_notifier_list, it will cause a loop
panic.

Add a check in notifier_chain_register(), intercepting duplicate
registrations to avoid infinite loops

Link: http://lkml.kernel.org/r/1568861888-34045-2-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

auxdisplay: charlcd: deduplicate simple_strtoul()

Like in commit 8b2303de399f ("serial: core: Fix handling of options
after MMIO address") we may use simple_strtoul() which in comparison to
kstrtoul() can do conversion in-place without additional and unnecessary
code to be written.

Link: http://lkml.kernel.org/r/20190801192904.41087-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: update comment about simple_strto<foo>() functions

There were discussions in the past about use cases for
simple_strto<foo>() functions and, in some rare cases, they have a
benefit over kstrto<foo>() ones.

Update a comment to reduce confusion about special use cases.

Link: http://lkml.kernel.org/r/20190801192904.41087-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message

A Fixes: lines in a commit message generally indicate that a previous
commit was inadequate for whatever reason.

The signers of the previous inadequate commit should also be cc'd on
this new commit so update get_maintainer to find the old commit and add
the original signers.

Link: http://lkml.kernel.org/r/33605b9fc0e0f711236951ae84185a6218acff4f.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/Kconfig: fix indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ / /' -i */Kconfig

Link: http://lkml.kernel.org/r/1574306573-10886-1-git-send-email-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/scc.h: make uapi linux/scc.h self-contained

Userspace cannot compile <linux/scc.h>

    CC      usr/include/linux/scc.h.s
  In file included from <command-line>:32:0:
  usr/include/linux/scc.h:20:20: error: `SIOCDEVPRIVATE' undeclared here (not in a function)
    SIOCSCCRESERVED = SIOCDEVPRIVATE,
                      ^~~~~~~~~~~~~~

Include <linux/sockios.h> to make it self-contained, and add it to the
compile-test coverage.

Link: http://lkml.kernel.org/r/20191108055809.26969-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

linux/build_bug.h: change type to int

Having BUILD_BUG_ON_ZERO produce a value of type size_t leads to awkward
casts in cases where the result needs to be signed, or of smaller type
than size_t. To avoid this, cast the value to int instead and rely on
implicit type conversions when a larger or unsigned type is needed.

Link: http://lkml.kernel.org/r/20190811184938.1796-3-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

.gitattributes: use 'dts' diff driver for dts files

Git is gaining support to display the closest node to the diff in the
hunk header via the 'dts' diff driver.  Use that driver for all dts and
dtsi files so we can gain some more context on where the diff is.
Taking a recent commit in the kernel dts files you can see the
difference.

With this patch and an updated git

: diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
:  index 62e07e1197cc..4c38426a6969 100644
:  --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
:  +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
:  @@ -289,5 +289,29 @@ vdd_hdmi: regulator@1 {
:                          gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
:                          enable-active-high;
:                  };
:  +
:  +               vdd_3v3_pcie: regulator@2 {
:  +                       compatible = "regulator-fixed";

vs. without this patch

:  diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
:  index 62e07e1197cc..4c38426a6969 100644
:  --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
:  +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
:  @@ -289,5 +289,29 @@
:                          gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
:                          enable-active-high;
:                  };
:  +
:  +               vdd_3v3_pcie: regulator@2 {
:  +                       compatible = "regulator-fixed";

You can see that we don't know what the context node is because it isn't
shown after the '@@'.

dts is not released yet but it is staged to be in the next release[1].
One can probably build git from source and try it out.

[1] https://git.kernel.org/pub/scm/git/git.git/commit/?id=d49c2c3466d2c8cb0b3d0a43e6b406b07078fdb1

Link: http://lkml.kernel.org/r/20191004212311.141538-1-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/sysctl.h: inline braces for ctl_table and ctl_table_header

Fix coding style of "struct ctl_table" and "struct ctl_table_header" to
have inline braces.

Besides the wide use of this proposed cose style, this change helps to
find at a glance the struct definition when navigating the code.

Link: http://lkml.kernel.org/r/20190903154906.188651-1-balsini@android.com
Signed-off-by: Alessio Balsini <balsini@android.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/Kconfig: fix indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ / /' -i */Kconfig

[adobriyan@gmail.com: add two spaces where necessary]
Link: http://lkml.kernel.org/r/20191124133936.GA5655@avx2
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/proc_fs.h: fix confusing macro arg name

state_size and ops are in the wrong position.

Link: http://lkml.kernel.org/r/20190910021747.11216-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/internal.h: shuffle "struct pde_opener"

List iteration takes more code than anything else which means embedded
list_head should be the first element of the structure.

Space savings:

add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-18 (-18)
Function                                     old     new   delta
close_pdeo                                   228     227      -1
proc_reg_release                              86      82      -4
proc_entry_rundown                           143     139      -4
proc_reg_open                                298     289      -9

Link: http://lkml.kernel.org/r/20191004234753.GB30246@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc/generic.c: delete useless "len" variable

Pointer to next '/' encodes length of path element and next start
position. Subtraction and increment are redundant.

Link: http://lkml.kernel.org/r/20191004234521.GA30246@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: change ->nlink under proc_subdir_lock

Currently gluing PDE into global /proc tree is done under lock, but
changing ->nlink is not. Additionally struct proc_dir_entry::nlink is
not atomic so updates can be lost.

Link: http://lkml.kernel.org/r/20190925202436.GA17388@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: replace is_zero_pfn with is_huge_zero_pmd for thp

For hugely mapped thp, we use is_huge_zero_pmd() to check if it's zero
page or not.

We do fill ptes with my_zero_pfn() when we split zero thp pmd, but this
is not what we have in vm_normal_page_pmd() -- pmd_trans_huge_lock()
makes sure of it.

This is a trivial fix for /proc/pid/numa_maps, and AFAIK nobody
complains about it.

Gerald Schaefer asked:
: Maybe the description could also mention the symptom of this bug?
: I would assume that it affects anon/dirty accounting in gather_pte_stats(),
: for huge mappings, if zero page mappings are not correctly recognized.

I came across this while I was looking at the code, so I'm not aware of
any symptom.

Link: http://lkml.kernel.org/r/20191108192629.201556-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol: use vmstat names for printing statistics

Use common names from vmstat array when possible.  This gives not much
difference in code size for now, but should help in keeping interfaces
consistent.

  add/remove: 0/2 grow/shrink: 2/0 up/down: 70/-72 (-2)
  Function                                     old     new   delta
  memory_stat_format                           984    1050     +66
  memcg_stat_show                              957     961      +4
  memcg1_event_names                            32       -     -32
  mem_cgroup_lru_names                          40       -     -40
  Total: Before=14485337, After=14485335, chg -0.00%

Link: http://lkml.kernel.org/r/157113012508.453.80391533767219371.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmstat: add helpers to get vmstat item names for each enum type

Statistics in vmstat is combined from counters with different structure,
but names for them are merged into one array.

This patch adds trivial helpers to get name for each item:

  const char *zone_stat_name(enum zone_stat_item item);
  const char *numa_stat_name(enum numa_stat_item item);
  const char *node_stat_name(enum node_stat_item item);
  const char *writeback_stat_name(enum writeback_stat_item item);
  const char *vm_event_name(enum vm_event_item item);

Names for enum writeback_stat_item are folded in the middle of
vmstat_text so this patch moves declaration into header to calculate
offset of following items.

Also this patch reuses piece of node stat names for lru list names:

  const char *lru_list_name(enum lru_list lru);

This returns common lru list names: "inactive_anon", "active_anon",
"inactive_file", "active_file", "unevictable".

[khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items]
Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz
Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u
Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg/slab: wait for !root kmem_cache refcnt killing on root kmem_cache destruction

Christian reported a warning like the following obtained during running
some KVM-related tests on s390:

    WARNING: CPU: 8 PID: 208 at lib/percpu-refcount.c:108 percpu_ref_exit+0x50/0x58
    Modules linked in: kvm(-) xt_CHECKSUM xt_MASQUERADE bonding xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_na>
    CPU: 8 PID: 208 Comm: kworker/8:1 Not tainted 5.2.0+ #66
    Hardware name: IBM 2964 NC9 712 (LPAR)
    Workqueue: events sysfs_slab_remove_workfn
    Krnl PSW : 0704e00180000000 0000001529746850 (percpu_ref_exit+0x50/0x58)
               R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
    Krnl GPRS: 00000000ffff8808 0000001529746740 000003f4e30e8e18 0036008100000000
               0000001f00000000 0035008100000000 0000001fb3573ab8 0000000000000000
               0000001fbdb6de00 0000000000000000 0000001529f01328 0000001fb3573b00
               0000001fbb27e000 0000001fbdb69300 000003e009263d00 000003e009263cd0
    Krnl Code: 0000001529746842: f0a0000407fe        srp        4(11,%r0),2046,0
               0000001529746848: 47000700            bc         0,1792
              #000000152974684c: a7f40001            brc        15,152974684e
              >0000001529746850: a7f4fff2            brc        15,1529746834
               0000001529746854: 0707                bcr        0,%r7
               0000001529746856: 0707                bcr        0,%r7
               0000001529746858: eb8ff0580024        stmg       %r8,%r15,88(%r15)
               000000152974685e: a738ffff            lhi        %r3,-1
    Call Trace:
    ([<000003e009263d00>] 0x3e009263d00)
     [<00000015293252ea>] slab_kmem_cache_release+0x3a/0x70
     [<0000001529b04882>] kobject_put+0xaa/0xe8
     [<000000152918cf28>] process_one_work+0x1e8/0x428
     [<000000152918d1b0>] worker_thread+0x48/0x460
     [<00000015291942c6>] kthread+0x126/0x160
     [<0000001529b22344>] ret_from_fork+0x28/0x30
     [<0000001529b2234c>] kernel_thread_starter+0x0/0x10
    Last Breaking-Event-Address:
     [<000000152974684c>] percpu_ref_exit+0x4c/0x58
    ---[ end trace b035e7da5788eb09 ]---

The problem occurs because kmem_cache_destroy() is called immediately
after deleting of a memcg, so it races with the memcg kmem_cache
deactivation.

flush_memcg_workqueue() at the beginning of kmem_cache_destroy() is
supposed to guarantee that all deactivation processes are finished, but
failed to do so.  It waits for an rcu grace period, after which all
children kmem_caches should be deactivated.  During the deactivation
percpu_ref_kill() is called for non root kmem_cache refcounters, but it
requires yet another rcu grace period to finish the transition to the
atomic (dead) state.

So in a rare case when not all children kmem_caches are destroyed at the
moment when the root kmem_cache is about to be gone, we need to wait
another rcu grace period before destroying the root kmem_cache.

This issue can be triggered only with dynamically created kmem_caches
which are used with memcg accounting.  In this case per-memcg child
kmem_caches are created.  They are deactivated from the cgroup removing
path.  If the destruction of the root kmem_cache is racing with the
removal of the cgroup (both are quite complicated multi-stage
processes), the described issue can occur.  The only known way to
trigger it in the real life, is to unload some kernel module which
creates a dedicated kmem_cache, used from different memory cgroups with
GFP_ACCOUNT flag.  If the unloading happens immediately after calling
rmdir on the corresponding cgroup, there is some chance to trigger the
issue.

Link: http://lkml.kernel.org/r/20191129025011.3076017-1-guro@fb.com
Fixes: f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/kasan/common.c: fix compile error

I hit the following compile error in arch/x86/

   mm/kasan/common.c: In function kasan_populate_vmalloc:
   mm/kasan/common.c:797:2: error: implicit declaration of function flush_cache_vmap; did you mean flush_rcu_work? [-Werror=implicit-function-declaration]
     flush_cache_vmap(shadow_start, shadow_end);
     ^~~~~~~~~~~~~~~~
     flush_rcu_work
   cc1: some warnings being treated as errors

Link: http://lkml.kernel.org/r/1575363013-43761-1-git-send-email-zhongjiang@huawei.com
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'tag-chrome-platform-for-v5.5' of git://git./linux/kernel/git/chrome-platform/linux

Pull chrome platform changes from Benson Leung:
"CrOS EC / MFD / IIO:

   - Contains tag-ib-chrome-mfd-iio-input-5.5, which is the first part
     of a series from Gwendal to refactor sensor code between MFD, CrOS
     EC, iio and input in order to add a new sensorhub driver and FIFO
     processing

  Wilco EC:

   - Add support for Dell's USB PowerShare policy control, keyboard
     backlight LED driver, and a new test_event file.

   - Fixes use after free in wilco_ec's telemetry driver.

  Misc:

   - bugfix in cros_usbpd_logger (missing destroy workqueue)"

* tag 'tag-chrome-platform-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: wilco_ec: fix use after free issue
  platform/chrome: cros_ec: Add Kconfig default for cros-ec-sensorhub
  Revert "Input: cros_ec_keyb: mask out extra flags in event_type"
  Revert "Input: cros_ec_keyb - add back missing mask for event_type"
  platform/chrome: cros_ec: handle MKBP more events flag
  platform/chrome: cros_ec: Do not attempt to register a non-positive IRQ number
  platform/chrome: cros-ec: Record event timestamp in the hard irq
  mfd / platform / iio: cros_ec: Register sensor through sensorhub
  iio / platform: cros_ec: Add cros-ec-sensorhub driver
  mfd / platform: cros_ec: Add sensor_count and make check_features public
  platform/chrome: cros_ec: Put docs with the code
  platform/chrome: cros_usbpd_logger: add missed destroy_workqueue in remove
  platform/chrome: cros_ec: Fix Kconfig indentation
  platform/chrome: wilco_ec: Add keyboard backlight LED support
  platform/chrome: wilco_ec: Add charging config driver
  platform/chrome: wilco_ec: Add Dell's USB PowerShare Policy control
  platform/chrome: wilco_ec: Add debugfs test_event file

Merge tag 'spdx-5.5-rc1' of git://git./linux/kernel/git/gregkh/spdx

Pull SPDX fix from Greg KH:
"Here is a single SPDX fixup for 5.5-rc1

  It resolves an issue where we had missed a few .h files with the
  auto-tagging scripts because they had "GPL" text in strings within the
  file themselves. This single patch fixes up the issue and provides the
  proper SPDX tags at the top of them as needed.

  This patch has been in linux-next for many many weeks now with no
  reported issues"

* tag 'spdx-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  export,module: add SPDX GPL-2.0 license identifier to headers with no license

Merge tag 'tty-5.5-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
"Here is the "big" tty and serial driver patches for 5.5-rc1.

  It's a bit later in the merge window than normal as I wanted to make
  sure some last-minute patches applied to it were all sane. They seem
  to be :)

  There's a lot of little stuff in here, for the tty core, and for lots
  of serial drivers:

   - reverts of uartlite serial driver patches that were wrong

   - msm-serial driver fixes

   - serial core updates and fixes

   - tty core fixes

   - serial driver dma mapping api changes

   - lots of other tiny fixes and updates for serial drivers

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  vcs: prevent write access to vcsu devices
  tty: vt: keyboard: reject invalid keycodes
  tty: don't crash in tty_init_dev when missing tty_port
  serial: stm32: fix clearing interrupt error flags
  tty: Fix Kconfig indentation, continued
  serial: serial_core: Perform NULL checks for break_ctl ops
  tty: remove unused argument from tty_open_by_driver()
  tty: Fix Kconfig indentation
  {tty: serial, nand: onenand}: samsung: rename to fix build warning
  serial: ifx6x60: add missed pm_runtime_disable
  serial: pl011: Fix DMA ->flush_buffer()
  Revert "serial-uartlite: Move the uart register"
  Revert "serial-uartlite: Add get serial id if not provided"
  Revert "serial-uartlite: Do not use static struct uart_driver out of probe()"
  Revert "serial-uartlite: Add runtime support"
  Revert "serial-uartlite: Change logic how console_port is setup"
  Revert "serial-uartlite: Use allocated structure instead of static ones"
  tty: serial: msm_serial: Use dma_request_chan() directly for channel request
  tty: serial: tegra: Use dma_request_chan() directly for channel request
  ...

Merge tag 'pci-v5.5-changes' of git://git./linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

   - Warn if a host bridge has no NUMA info (Yunsheng Lin)

   - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
     Efremov)

  Resource management:

   - Fix boot-time Embedded Controller GPE storm caused by incorrect
     resource assignment after ACPI Bus Check Notification (Mika
     Westerberg)

   - Protect pci_reassign_bridge_resources() against concurrent
     addition/removal (Benjamin Herrenschmidt)

   - Fix bridge dma_ranges resource list cleanup (Rob Herring)

   - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
     the MMIO and prefetchable MMIO window sizes of hotplug bridges
     independently (Nicholas Johnson)

   - Fix MMIO/MMIO_PREF window assignment that assigned more space than
     desired (Nicholas Johnson)

   - Only enforce bus numbers from bridge EA if the bridge has EA
     devices downstream (Subbaraya Sundeep)

   - Consolidate DT "dma-ranges" parsing and convert all host drivers to
     use shared parsing (Rob Herring)

  Error reporting:

   - Restore AER capability after resume (Mayurkumar Patel)

   - Add PoisonTLPBlocked AER counter (Rajat Jain)

   - Use for_each_set_bit() to simplify AER code (Andy Shevchenko)

   - Fix AER kernel-doc (Andy Shevchenko)

   - Add "pcie_ports=dpc-native" parameter to allow native use of DPC
     even if platform didn't grant control over AER (Olof Johansson)

  Hotplug:

   - Avoid returning prematurely from sysfs requests to enable or
     disable a PCIe hotplug slot (Lukas Wunner)

   - Don't disable interrupts twice when suspending hotplug ports (Mika
     Westerberg)

   - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
     Westerberg)

  Power management:

   - Remove unnecessary ASPM locking (Bjorn Helgaas)

   - Add support for disabling L1 PM Substates (Heiner Kallweit)

   - Allow re-enabling Clock PM after it has been disabled (Heiner
     Kallweit)

   - Add sysfs attributes for controlling ASPM link states (Heiner
     Kallweit)

   - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
     sysfs files (Heiner Kallweit)

   - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
     USB 2.0 or 1.1 connect events (Kai-Heng Feng)

   - Move power state check out of pci_msi_supported() (Bjorn Helgaas)

   - Fix incorrect MSI-X masking on resume and revert related nvme quirk
     for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)

   - Always return devices to D0 when thawing to fix hibernation with
     drivers like mlx4 that used legacy power management (previously we
     only did it for drivers with new power management ops) (Dexuan Cui)

   - Clear PCIe PME Status even for legacy power management (Bjorn
     Helgaas)

   - Fix PCI PM documentation errors (Bjorn Helgaas)

   - Use dev_printk() for more power management messages (Bjorn Helgaas)

   - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)

   - Convert xen-platform from legacy to generic power management (Bjorn
     Helgaas)

   - Removed unused .resume_early() and .suspend_late() legacy power
     management hooks (Bjorn Helgaas)

   - Rearrange power management code for clarity (Rafael J. Wysocki)

   - Decode power states more clearly ("4" or "D4" really refers to
     "D3cold") (Bjorn Helgaas)

   - Notice when reading PM Control register returns an error (~0)
     instead of interpreting it as being in D3hot (Bjorn Helgaas)

   - Add missing link delays required by the PCIe spec (Mika Westerberg)

  Virtualization:

   - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
     Helgaas)

   - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
     previously didn't recognize that) (Kuppuswamy Sathyanarayanan)

   - Allow VFs to use PASID (the PF PASID capability is shared by the
     VFs, but the code previously didn't recognize that) (Kuppuswamy
     Sathyanarayanan)

   - Disconnect PF and VF ATS enablement, since ATS in PFs and
     associated VFs can be enabled independently (Kuppuswamy
     Sathyanarayanan)

   - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)

   - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)

   - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
     Wilczynski)

   - Remove unused PRI and PASID stubs (Bjorn Helgaas)

   - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
     interfaces that are only used by built-in IOMMU drivers (Bjorn
     Helgaas)

   - Hide PRI and PASID state restoration functions used only inside the
     PCI core (Bjorn Helgaas)

   - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)

   - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)

   - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
     Cherian)

   - Fix the UPDCR register address in the Intel ACS quirk (Steffen
     Liebergeld)

   - Unify ACS quirk implementations (Bjorn Helgaas)

  Amlogic Meson host bridge driver:

   - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

   - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

   - Fix meson clock names to match DT bindings (Neil Armstrong)

   - Add meson support for Amlogic G12A SoC with separate shared PHY
     (Neil Armstrong)

   - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
     combo PHY (Neil Armstrong)

   - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

   - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
     (Neil Armstrong)

  Broadcom iProc host bridge driver:

   - Invalidate iProc PAXB address mapping before programming it
     (Abhishek Shah)

   - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)

  Cadence host bridge driver:

   - Refactor Cadence PCIe host controller to use as a library for both
     host and endpoint (Tom Joseph)

  Freescale Layerscape host bridge driver:

   - Add layerscape LS1028a support (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Add VMD bus 224-255 restriction decode (Jon Derrick)

   - Add VMD 8086:9A0B device ID (Jon Derrick)

   - Remove Keith from VMD maintainer list (Keith Busch)

  Marvell ARMADA 3700 / Aardvark host bridge driver:

   - Use LTSSM state to build link training flag since Aardvark doesn't
     implement the Link Training bit (Remi Pommarel)

   - Delay before training Aardvark link in case PERST# was asserted
     before the driver probe (Remi Pommarel)

   - Fix Aardvark issues with Root Control reads and writes (Remi
     Pommarel)

   - Don't rely on jiffies in Aardvark config access path since
     interrupts may be disabled (Remi Pommarel)

   - Fix Aardvark big-endian support (Grzegorz Jaszczyk)

  Marvell ARMADA 370 / XP host bridge driver:

   - Make mvebu_pci_bridge_emul_ops static (Ben Dooks)

  Microsoft Hyper-V host bridge driver:

   - Add hibernation support for Hyper-V virtual PCI devices (Dexuan
     Cui)

   - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
     Cui)

   - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)

  Mobiveil host bridge driver:

   - Change mobiveil csr_read()/write() function names that conflict
     with riscv arch functions (Kefeng Wang)

  NVIDIA Tegra host bridge driver:

   - Fix Tegra CLKREQ dependency programming (Vidya Sagar)

  Renesas R-Car host bridge driver:

   - Remove unnecessary header include from rcar (Andrew Murray)

   - Tighten register index checking for rcar inbound range programming
     (Marek Vasut)

   - Fix rcar inbound range alignment calculation to improve packing of
     multiple entries (Marek Vasut)

   - Update rcar MACCTLR setting to match documentation (Yoshihiro
     Shimoda)

   - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
     (Yoshihiro Shimoda)

   - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
     Horman)

  Rockchip host bridge driver:

   - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
     Murphy)

  Socionext UniPhier host bridge driver:

   - Set uniphier to host (RC) mode always (Kunihiko Hayashi)

  Endpoint drivers:

   - Fix endpoint driver sign extension problem when shifting page
     number to phys_addr_t (Alan Mikhak)

  Misc:

   - Add NumaChip SPDX header (Krzysztof Wilczynski)

   - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)

   - Remove unused includes (Krzysztof Wilczynski)

   - Removed unused sysfs attribute groups (Ben Dooks)

   - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)

   - Add PCIe Link Control 2 register field definitions to replace magic
     numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)

   - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
     Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)

   - Use pcie_capability_read_word() instead of pci_read_config_word()
     in AMDGPU and Radeon CIK/SI (Frederick Lawler)

   - Remove unused pci_irq_get_node() Greg Kroah-Hartman)

   - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
     (Palmer Dabbelt, Michal Simek)

   - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)

   - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
     Helgaas)

   - Fix bridge emulation big-endian support (Grzegorz Jaszczyk)

   - Fix dwc find_next_bit() usage (Niklas Cassel)

   - Fix pcitest.c fd leak (Hewenliang)

   - Fix typos and comments (Bjorn Helgaas)

   - Fix Kconfig whitespace errors (Krzysztof Kozlowski)"

* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
  PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
  asm-generic: Make msi.h a mandatory include/asm header
  Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
  PCI/MSI: Fix incorrect MSI-X masking on resume
  PCI/MSI: Move power state check out of pci_msi_supported()
  PCI/MSI: Remove unused pci_irq_get_node()
  PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
  PCI: hv: Change pci_protocol_version to per-hbus
  PCI: hv: Add hibernation support
  PCI: hv: Reorganize the code in preparation of hibernation
  MAINTAINERS: Remove Keith from VMD maintainer
  PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
  PCI/ASPM: Add sysfs attributes for controlling ASPM link states
  PCI: Fix indentation
  drm/radeon: Prefer pcie_capability_read_word()
  drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
  drm/radeon: Correct Transmit Margin masks
  drm/amdgpu: Prefer pcie_capability_read_word()
  PCI: uniphier: Set mode register to host mode
  drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
  ...

Merge tag 'rtc-5.5' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
"A lot of unnecessary code removal in here that ends up decreasing the
  number of lines in the subsystem. The ds1343 and ds1347 drivers got
  cleaned up. The rest are the usual fixes and new features.

  Subsystem:
   - fix warnings and errors with make W=1
   - UIE are now disabled while setting the RTC time
   - UIE are now disallowed when the RTC time is not set.

  Drivers:
   - remove unecessary .remove callbacks
   - Set RTC range for cros-ec, ds1343, ds1347, m41t80, s35390a, vt8500
   - Use devm_platform_ioremap_resource where applicable
   - rv3028: add clock out support"

* tag 'rtc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
  rtc: Fix Kconfig indentation
  rtc: xgene: Remove unused struct device in struct xgene_rtc_dev
  rtc: sun6i: Remove struct device from sun6i_rtc_dev
  rtc: st-lpc: Remove struct resource from struct st_rtc
  rtc: pcf8523: Remove struct pcf8523
  rtc: meson: remove redundant assignment to variable retries
  rtc: v3020: remove set but unused variable
  rtc: tegra: remove set but unused variable
  rtc: pm8xxx: update kerneldoc for struct pm8xxx_rtc
  rtc: m41t80: remove excess kerneldoc
  rtc: ds1685: fix build error with make W=1
  rtc: ds1685: remove set but unused variables
  rtc: ds1374: remove unused variable
  rtc: sysfs: fix hctosys_show kerneldoc
  rtc: interface: fix kerneldoc comments
  rtc: msm6242: Remove unneeded msm6242_set()/msm6242_clear() functions
  rtc: msm6242: Fix reading of 10-hour digit
  rtc: tps65910: allow using RTC without alarm interrupt
  rtc: fsl-ftm-alarm: remove select FSL_RCPM and default y from Kconfig
  rtc: pcf8563: Constify clkout_rates
  ...

Merge tag 'iomap-5.5-merge-13' of git://git./fs/xfs/xfs-linux

Pull iomap cleanups from Darrick Wong:
"Aome more new iomap code for 5.5.

  There's not much this time -- just removing some local variables that
  don't need to exist in the iomap directio code"

* tag 'iomap-5.5-merge-13' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: remove unneeded variable in iomap_dio_rw()
  iomap: Do not create fake iter in iomap_dio_bio_actor()

Merge tag 'apparmor-pr-2019-12-03' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
"Features:

   - increase left match history buffer size to provide improved
     conflict resolution in overlapping execution rules.

   - switch buffer allocation to use a memory pool and GFP_KERNEL where
     possible.

   - add compression of policy blobs to reduce memory usage.

  Cleanups:

   - fix spelling mistake "immutible" -> "immutable"

  Bug fixes:

   - fix unsigned len comparison in update_for_len macro

   - fix sparse warning for type-casting of current->real_cred"

* tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: make it so work buffers can be allocated from atomic context
  apparmor: reduce rcu_read_lock scope for aa_file_perm mediation
  apparmor: fix wrong buffer allocation in aa_new_mount
  apparmor: fix unsigned len comparison with less than zero
  apparmor: increase left match history buffer size
  apparmor: Switch to GFP_KERNEL where possible
  apparmor: Use a memory pool instead per-CPU caches
  apparmor: Force type-casting of current->real_cred
  apparmor: fix spelling mistake "immutible" -> "immutable"
  apparmor: fix blob compression when ns is forced on a policy load
  apparmor: fix missing ZLIB defines
  apparmor: fix blob compression build failure on ppc
  apparmor: Initial implementation of raw policy blob compression

Merge tag 's390-5.5-2' of git://git./linux/kernel/git/s390/linux

Pull more s390 updates from Vasily Gorbik:

- Make stack unwinder reliable and suitable for livepatching. Add
   unwinder testing module.

- Fixes for CALL_ON_STACK helper used for stack switching.

- Fix unwinding from bpf code.

- Fix getcpu and remove compat support in vdso code.

- Fix address space control registers initialization.

- Save KASLR offset for early dumps.

- Handle new FILTERED_BY_HYPERVISOR reply code in crypto code.

- Minor perf code cleanup and potential memory leak fix.

- Add couple of error messages for corner cases during PCI device
   creation.

* tag 's390-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (33 commits)
  s390: remove compat vdso code
  s390/livepatch: Implement reliable stack tracing for the consistency model
  s390/unwind: add stack pointer alignment sanity checks
  s390/unwind: filter out unreliable bogus %r14
  s390/unwind: start unwinding from reliable state
  s390/test_unwind: add program check context tests
  s390/test_unwind: add irq context tests
  s390/test_unwind: print verbose unwinding results
  s390/test_unwind: add CALL_ON_STACK tests
  s390: fix register clobbering in CALL_ON_STACK
  s390/test_unwind: require that unwinding ended successfully
  s390/unwind: add a test for the internal API
  s390/unwind: always inline get_stack_pointer
  s390/pci: add error message on device number limit
  s390/pci: add error message for UID collision
  s390/cpum_sf: Check for SDBT and SDB consistency
  s390/cpum_sf: Use TEAR_REG macro consistantly
  s390/cpum_sf: Remove unnecessary check for pending SDBs
  s390/cpum_sf: Replace function name in debug statements
  s390/kaslr: store KASLR offset for early dumps
  ...

Merge tag 'xtensa-20191201' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

- add support for execute in place (XIP) kernels

- improvements in inline assembly: use named arguments and "m"
   constraints where possible

- improve stack dumping

- clean up system_call code and syscall tracing

- various small fixes and cleanups

* tag 'xtensa-20191201' of git://github.com/jcmvbkbc/linux-xtensa: (30 commits)
  xtensa: clean up system_call/xtensa_rt_sigreturn interaction
  xtensa: fix system_call interaction with ptrace
  xtensa: rearrange syscall tracing
  xtensa: fix syscall_set_return_value
  xtensa: drop unneeded headers from coprocessor.S
  xtensa: entry: Remove unneeded need_resched() loop
  xtensa: use MEMBLOCK_ALLOC_ANYWHERE for KASAN shadow map
  xtensa: fix TLB sanity checker
  xtensa: get rid of __ARCH_USE_5LEVEL_HACK
  xtensa: mm: fix PMD folding implementation
  xtensa: make stack dump size configurable
  xtensa: improve stack dumping
  xtensa: use "m" constraint instead of "r" in futex.h assembly
  xtensa: use "m" constraint instead of "a" in cmpxchg.h assembly
  xtensa: use named assembly arguments in cmpxchg.h
  xtensa: use "m" constraint instead of "a" in atomic.h assembly
  xtensa: use named assembly arguments in atomic.h
  xtensa: use "m" constraint instead of "a" in bitops.h assembly
  xtensa: use named assembly arguments in bitops.h
  xtensa: use macros to generate *_bit and test_and_*_bit functions
  ...

Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer updates from Ingo Molnar:
"The main changes in the timer code in this cycle were:

   - Clockevent updates:

      - timer-of framework cleanups. (Geert Uytterhoeven)

      - Use timer-of for the renesas-ostm and the device name to prevent
        name collision in case of multiple timers. (Geert Uytterhoeven)

      - Check if there is an error after calling of_clk_get in asm9260
        (Chuhong Yuan)

   - ABI fix: Zero out high order bits of nanoseconds on compat
     syscalls. This got broken a year ago, with apparently no side
     effects so far.

     Since the kernel would use random data otherwise I don't think we'd
     have other options but to fix the bug, even if there was a side
     effect to applications (Dmitry Safonov)

   - Optimize ns_to_timespec64() on 32-bit systems: move away from
     div_s64_rem() which can be slow, to div_u64_rem() which is faster
     (Arnd Bergmann)

   - Annotate KCSAN-reported false positive data races in
     hrtimer_is_queued() users by moving timer->state handling over to
     the READ_ONCE()/WRITE_ONCE() APIs. This documents these accesses
     (Eric Dumazet)

   - Misc cleanups and small fixes"

[ I undid the "ABI fix" and updated the comments instead. The reason
  there were apparently no side effects is that the fix was a no-op.

  The updated comment is to say _why_ it was a no-op.    - Linus ]

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Zero the upper 32-bits in __kernel_timespec on 32-bit
  time: Rename tsk->real_start_time to ->start_boottime
  hrtimer: Remove the comment about not used HRTIMER_SOFTIRQ
  time: Fix spelling mistake in comment
  time: Optimize ns_to_timespec64()
  hrtimer: Annotate lockless access to timer->state
  clocksource/drivers/asm9260: Add a check for of_clk_get
  clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
  clocksource/drivers/renesas-ostm: Convert to timer_of
  clocksource/drivers/timer-of: Use unique device name instead of timer
  clocksource/drivers/timer-of: Convert last full_name to %pOF

Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq updates from Ingo Molnar:
"Most of the IRQ subsystem changes in this cycle were irq-chip driver
  updates:

   - Qualcomm PDC wakeup interrupt support

   - Layerscape external IRQ support

   - Broadcom bcm7038 PM and wakeup support

   - Ingenic driver cleanup and modernization

   - GICv3 ITS preparation for GICv4.1 updates

   - GICv4 fixes

  There's also the series from Frederic Weisbecker that fixes memory
  ordering bugs for the irq-work logic, whose primary fix is to turn
  work->irq_work.flags into an atomic variable and then convert the
  complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a
  much simpler atomic_fetch_or() call.

  There are also various smaller cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs
  pinctrl/msm: Setup GPIO chip in hierarchy
  irqchip/qcom-pdc: Add irqchip set/get state calls
  irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs
  irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask
  irqchip/qcom-pdc: Update max PDC interrupts
  of/irq: Document properties for wakeup interrupt parent
  genirq: Introduce irq_chip_get/set_parent_state calls
  irqdomain: Add bus token DOMAIN_BUS_WAKEUP
  genirq: Fix function documentation of __irq_alloc_descs()
  irq_work: Fix IRQ_WORK_BUSY bit clearing
  irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))
  irq_work: Slightly simplify IRQ_WORK_PENDING clearing
  irq_work: Fix irq_work_claim() memory ordering
  irq_work: Convert flags to atomic_t
  irqchip: Ingenic: Add process for more than one irq at the same time.
  irqchip: ingenic: Alloc generic chips from IRQ domain
  irqchip: ingenic: Get virq number from IRQ domain
  irqchip: ingenic: Error out if IRQ domain creation failed
  irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions
  ...

Merge branch 'dmi-for-linus' of git://git./linux/kernel/git/jdelvare/staging

Pull dmi updates from Jean Delvare.

* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Add dmi_memdev_handle
firmware: dmi: Remember the memory type

Merge branch 'for-5.5' of git://git./linux/kernel/git/dennis/percpu

Pull percpu updates from Dennis Zhou:
"This has a change to fix percpu-refcount for RT kernels because
  rcu-sched disables preemption and the refcount release callback might
  acquire a spinlock"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  Revert "percpu: add __percpu to SHIFT_PERCPU_PTR"
  percpu-refcount: Use normal instead of RCU-sched"
  percpu: add __percpu to SHIFT_PERCPU_PTR

firmware: dmi: Add dmi_memdev_handle

Add a utility function dmi_memdev_handle() which returns the DMI
handle associated with a given memory slot. This will allow kernel
drivers to iterate over the memory slots.

Signed-off-by: Jean Delvare <jdelvare@suse.de>

firmware: dmi: Remember the memory type

Store the memory type while walking the memory slots, and provide a
way to retrieve it later.

Signed-off-by: Jean Delvare <jdelvare@suse.de>

Merge tag 'kbuild-v5.5' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- remove unneeded asm headers from hexagon, ia64

- add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving

- add 'helpnewconfig' target, which shows help for new CONFIG options

- support 'make nsdeps' for external modules

- make rebuilds faster by deleting $(wildcard $^) checks

- remove compile tests for kernel-space headers

- refactor modpost to simplify modversion handling

- make single target builds faster

- optimize and clean up scripts/kallsyms.c

- refactor various Makefiles and scripts

* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
  MAINTAINERS: update Kbuild/Kconfig maintainer's email address
  scripts/kallsyms: remove redundant initializers
  scripts/kallsyms: put check_symbol_range() calls close together
  scripts/kallsyms: make check_symbol_range() void function
  scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
  scripts/kallsyms: move more patterns to the ignored_prefixes array
  scripts/kallsyms: skip ignored symbols very early
  scripts/kallsyms: add const qualifiers where possible
  scripts/kallsyms: make find_token() return (unsigned char *)
  scripts/kallsyms: replace prefix_underscores_count() with strspn()
  scripts/kallsyms: add sym_name() to mitigate cast ugliness
  scripts/kallsyms: remove unneeded length check for prefix matching
  scripts/kallsyms: remove redundant is_arm_mapping_symbol()
  scripts/kallsyms: set relative_base more effectively
  scripts/kallsyms: shrink table before sorting it
  scripts/kallsyms: fix definitely-lost memory leak
  scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
  kbuild: make single target builds even faster
  modpost: respect the previous export when 'exported twice' is warned
  modpost: do not set ->preloaded for symbols from Module.symvers
  ...

Merge tag 'linux-kselftest-5.5-rc1-fixes2' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull more kselftest fixes from Shuah Khan:
"This second Kselftest fixes update for Linux 5.5-rc1 consists of an
urgent revert to fix regression in CI coverage"

* tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative paths"

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

- Fix build error in crypto lib code when crypto API is off

- Fix NULL/error check in hisilicon

- Fix Kconfig-related build error in talitos

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: hisilicon - fix a NULL vs IS_ERR() bug in sec_create_qp_ctx()
  crypto: talitos - Fix build error by selecting LIB_DES
  crypto: arch - conditionalize crypto api in arch glue for lib code

Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC update from Stafford Horne:
"White space fixups in Kconfig files from Krzysztof Kozlowski"

* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix Kconfig indentation

Merge tag 'for-linus-5.5-rc1' of git://git./linux/kernel/git/rw/uml

Pull UML updates from Richard Weinberger:

- Fixes for our new virtio code

- Fix for the irqflags tracer

- Kconfig coding style fixes

- Allow BPF firmware loading in our vector driver

* tag 'for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Loadable BPF "Firmware" for vector drivers
  um: Fix Kconfig indentation
  um: virtio_uml: Disallow modular build
  um: virtio: Keep reading on -EAGAIN
  um: virtio: Remove device on disconnect
  um: Don't trace irqflags during shutdown

Merge tag 'upstream-5.5-rc1' of git://git./linux/kernel/git/rw/ubifs

Pull UBI/UBIFS/JFFS2 updates from Richard Weinberger:
"This pull request contains mostly fixes for UBI, UBIFS and JFFS2:

  UBI:

   - Fix a regression around producing a anchor PEB for fastmap.

     Due to a change in our locking fastmap was unable to produce fresh
     anchors an re-used the existing one a way to often.

  UBIFS:

   - Fixes for endianness. A few places blindly assumed little endian.

   - Fix for a memory leak in the orphan code.

   - Fix for a possible crash during a commit.

   - Revert a wrong bugfix.

  JFFS2:

   - Revert a bad bugfix (false positive from a code checking tool)"

* tag 'upstream-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  Revert "jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()"
  ubi: Fix producing anchor PEBs
  ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps
  ubifs: do_kill_orphans: Fix a memory leak bug
  Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path"
  ubifs: Fix type of sup->hash_algo
  ubifs: Fixed missed le64_to_cpu() in journal
  ubifs: Force prandom result to __le32
  ubifs: Remove obsolete TODO from dfs_file_write()
  ubi: Fix warning static is not at beginning of declaration
  ubi: Print skip_check in ubi_dump_vol_info()

Merge tag 'xfs-5.5-merge-16' of git://git./fs/xfs/xfs-linux

Pull XFS updates from Darrick Wong:
"For this release, we changed quite a few things.

  Highlights:

   - Fixed some long tail latency problems in the block allocator

   - Removed some long deprecated (and for the past several years no-op)
     mount options and ioctls

   - Strengthened the extended attribute and directory verifiers

   - Audited and fixed all the places where we could return EFSCORRUPTED
     without logging anything

   - Refactored the old SGI space allocation ioctls to make the
     equivalent fallocate calls

   - Fixed a race between fallocate and directio

   - Fixed an integer overflow when files have more than a few
     billion(!) extents

   - Fixed a longstanding bug where quota accounting could be incorrect
     when performing unwritten extent conversion on a freshly mounted fs

   - Fixed various complaints in scrub about soft lockups and
     unresponsiveness to signals

   - De-vtable'd the directory handling code, which should make it
     faster

   - Converted to the new mount api, for better or for worse

   - Cleaned up some memory leaks

  and quite a lot of other smaller fixes and cleanups.

  A more detailed summary:

   - Fill out the build string

   - Prevent inode fork extent count overflows

   - Refactor the allocator to reduce long tail latency

   - Rework incore log locking a little to reduce spinning

   - Break up the xfs_iomap_begin functions into smaller more cohesive
     parts

   - Fix allocation alignment being dropped too early when the
     allocation request is for more blocks than an AG is large

   - Other small cleanups

   - Clean up file buftarg retrieval helpers

   - Hoist the resvsp and unresvsp ioctls to the vfs

   - Remove the undocumented biosize mount option, since it has never
     been mentioned as existing or supported on linux

   - Clean up some of the mount option printing and parsing

   - Enhance attr leaf verifier to check block structure

   - Check dirent and attr names for invalid characters before passing
     them to the vfs

   - Refactor open-coded bmbt walking

   - Fix a few places where we return EIO instead of EFSCORRUPTED after
     failing metadata sanity checks

   - Fix a synchronization problem between fallocate and aio dio
     corrupting the file length

   - Clean up various loose ends in the iomap and bmap code

   - Convert to the new mount api

   - Make sure we always log something when returning EFSCORRUPTED

   - Fix some problems where long running scrub loops could trigger soft
     lockup warnings and/or fail to exit due to fatal signals pending

   - Fix various Coverity complaints

   - Remove most of the function pointers from the directory code to
     reduce indirection penalties

   - Ensure that dquots are attached to the inode when performing
     unwritten extent conversion after io

   - Deuglify incore projid and crtime types

   - Fix another AGI/AGF locking order deadlock when renaming

   - Clean up some quota typedefs

   - Remove the FSSETDM ioctls which haven't done anything in 20 years

   - Fix some memory leaks when mounting the log fails

   - Fix an underflow when updating an xattr leaf freemap

   - Remove some trivial wrappers

   - Report metadata corruption as an error, not a (potentially) fatal
     assertion

   - Clean up the dir/attr buffer mapping code

   - Allow fatal signals to kill scrub during parent pointer checks"

* tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits)
  xfs: allow parent directory scans to be interrupted with fatal signals
  xfs: remove the mappedbno argument to xfs_da_get_buf
  xfs: remove the mappedbno argument to xfs_da_read_buf
  xfs: split xfs_da3_node_read
  xfs: remove the mappedbno argument to xfs_dir3_leafn_read
  xfs: remove the mappedbno argument to xfs_dir3_leaf_read
  xfs: remove the mappedbno argument to xfs_attr3_leaf_read
  xfs: remove the mappedbno argument to xfs_da_reada_buf
  xfs: improve the xfs_dabuf_map calling conventions
  xfs: refactor xfs_dabuf_map
  xfs: simplify mappedbno handling in xfs_da_{get,read}_buf
  xfs: report corruption only as a regular error
  xfs: Remove kmem_zone_free() wrapper
  xfs: Remove kmem_zone_destroy() wrapper
  xfs: Remove slab init wrappers
  xfs: fix attr leaf header freemap.size underflow
  xfs: fix some memory leaks in log recovery
  xfs: fix another missing include
  xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE
  xfs: remove duplicated include from xfs_dir2_data.c
  ...

Merge tag 'firewire-update' of git://git./linux/kernel/git/ieee1394/linux1394

Pull FireWire updates from Stefan Richter:

- another y2038 fix

- janitorial code movement

* tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: code cleanup after vm_map_pages_zero introduction
firewire: ohci: stop using get_seconds() for BUS_TIME

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: aacraid, ufs, zfcp,
  NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
  plus a whole load of minor updates and fixes.

  The major core changes are Al Viro's reworking of sg's handling of
  copy to/from user, Ming Lei's removal of the host busy counter to
  avoid contention in the multiqueue case and Damien Le Moal's fixing of
  residual tracking across error handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
  scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
  scsi: target: core: Fix a pr_debug() argument
  scsi: iscsi: Don't send data to unbound connection
  scsi: target: iscsi: Wait for all commands to finish before freeing a session
  scsi: target: core: Release SPC-2 reservations when closing a session
  scsi: target: core: Document target_cmd_size_check()
  scsi: bnx2i: fix potential use after free
  Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
  scsi: NCR5380: Add disconnect_mask module parameter
  scsi: NCR5380: Unconditionally clear ICR after do_abort()
  scsi: NCR5380: Call scsi_set_resid() on command completion
  scsi: scsi_debug: num_tgts must be >= 0
  scsi: lpfc: use hdwq assigned cpu for allocation
  scsi: arcmsr: fix indentation issues
  scsi: qla4xxx: fix double free bug
  scsi: pm80xx: Modified the logic to collect fatal dump
  scsi: pm80xx: Tie the interrupt name to the module instance
  scsi: pm80xx: Controller fatal error through sysfs
  scsi: pm80xx: Do not request 12G sas speeds
  scsi: pm80xx: Cleanup command when a reset times out
  ...

Merge tag 'docs-5.5a' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
"Here are the main documentation changes for 5.5:

   - Various kerneldoc script enhancements.

   - More RST conversions; those are slowing down as we run out of
     things to convert, but we're a ways from done still.

   - Dan's "maintainer profile entry" work landed at last. Now we just
     need to get maintainers to fill in the profiles...

   - A reworking of the parallel build setup to work better with a
     variety of systems (and to not take over huge systems entirely in
     particular).

   - The MAINTAINERS file is now converted to RST during the build.
     Hopefully nobody ever tries to print this thing, or they will need
     to load a lot of paper.

   - A script and documentation making it easy for maintainers to add
     Link: tags at commit time.

  Also included is the removal of a bunch of spurious CR characters"

* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
  docs: remove a bunch of stray CRs
  docs: fix up the maintainer profile document
  libnvdimm, MAINTAINERS: Maintainer Entry Profile
  Maintainer Handbook: Maintainer Entry Profile
  MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
  docs, parallelism: Rearrange how jobserver reservations are made
  docs, parallelism: Do not leak blocking mode to other readers
  docs, parallelism: Fix failure path and add comment
  Documentation: Remove bootmem_debug from kernel-parameters.txt
  Documentation: security: core.rst: fix warnings
  Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
  Documentation/translation: Use Korean for Korean translation title
  docs/memory-barriers.txt: Remove remaining references to mmiowb()
  docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
  Documentation/kokr: Kill all references to mmiowb()
  docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
  docs: Add initial documentation for devfreq
  Documentation: Document how to get links with git am
  docs: Add request_irq() documentation
  ...

Merge tag 'devicetree-for-5.5' of git://git./linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

- DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

- Convert a bunch of Samsung bindings to DT schema

- Convert a bunch of ST stm32 bindings to DT schema

- Realtek and Exynos additions to Arm Mali bindings

- Fix schema errors in RiscV CPU schema

- Various schema fixes from improved meta-schema checks

- Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

- Fix a memory leak in add_changeset_property() and DT unit tests.

- Several documentation improvements for schema validation

- Rework build rules to improve schema validation errors

- Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...

Merge tag 'pstore-v5.5-rc1' of git://git./linux/kernel/git/kees/linux

Pull pstore bug fix from Kees Cook:

- add missing "static" (Ben Dooks)

* tag 'pstore-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Make pstore_choose_compression() static

Merge tag 'iommu-updates-v5.5' of git://git./linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

- Conversion of the AMD IOMMU driver to use the dma-iommu code for
   imlementing the DMA-API. This gets rid of quite some code in the
   driver itself, but also has some potential for regressions (non are
   known at the moment).

- Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
   This also includes some firmware interface changes, but those are
   acked by the respective maintainers.

- Preparatory work to support two distinct page-tables per domain in
   the ARM-SMMU driver

- Power management improvements for the ARM SMMUv2

- Custom PASID allocator support

- Multiple PCI DMA alias support for the AMD IOMMU driver

- Adaption of the Mediatek driver to the changed IO/TLB flush interface
   of the IOMMU core code.

- Preparatory patches for the Renesas IOMMU driver to support future
   hardware.

* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
  iommu/rockchip: Don't provoke WARN for harmless IRQs
  iommu/vt-d: Turn off translations at shutdown
  iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
  iommu/arm-smmu: Remove duplicate error message
  iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
  iommu/ipmmu-vmsa: Add utlb_offset_base
  iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
  iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
  iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
  iommu/ipmmu-vmsa: tidyup register definitions
  iommu/ipmmu-vmsa: Remove all unused register definitions
  iommu/mediatek: Reduce the tlb flush timeout value
  iommu/mediatek: Get rid of the pgtlock
  iommu/mediatek: Move the tlb_sync into tlb_flush
  iommu/mediatek: Delete the leaf in the tlb_flush
  iommu/mediatek: Use gather to achieve the tlb range flush
  iommu/mediatek: Add a new tlb_lock for tlb_flush
  iommu/mediatek: Correct the flush_iotlb_all callback
  iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
  iommu/io-pgtable-arm: Rationalise MAIR handling
  ...

Merge tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
"Here are the changes this time around, couple of new drivers and
  updates to few more:

   - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC,
     Freescale dpaa2 qDMA

   - Support for X1000 in JZ4780

   - Xilinx dma updates and support for Xilinx AXI MCDM controller

   - New bindings for rcar R8A774B1

   - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers"

* tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits)
  dmaengine: Fix Kconfig indentation
  dmaengine: sf-pdma: move macro to header file
  dmaengine: sf-pdma: replace /** with /* for non-function comment
  dmaengine: ti: edma: fix missed failure handling
  dmaengine: mmp_pdma: add missed of_dma_controller_free
  dmaengine: mmp_tdma: add missed of_dma_controller_free
  dmaengine: sprd: Add wrap address support for link-list mode
  MAINTAINERS: Add Green as SiFive PDMA driver maintainer
  dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00
  dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA
  dmaengine: zx: remove: removed dmam_pool_destroy
  dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
  dmaengine: iop-adma: clean up an indentation issue
  dmaengine: milbeaut-xdmac: remove redundant error log
  dmaengine: milbeaut-hdmac: remove redundant error log
  dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove
  dmaengine: JZ4780: Add support for the X1000.
  dt-bindings: dmaengine: Add X1000 bindings.
  dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support
  dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle
  ...

platform/chrome: wilco_ec: fix use after free issue

This is caused by dereferencing 'dev_data' after put_device() in
the telem_device_remove() function.
This patch just moves the put_device() down a bit to avoid this
issue.

Fixes: 1210d1e6bad1 ("platform/chrome: wilco_ec: Add telemetry char device interface")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Benson Leung <bleung@chromium.org>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Nick Crews <ncrews@chromium.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

Merge branch 'akpm' (patches from Andrew)

Merge updates from Andrew Morton:
"Incoming:

   - a small number of updates to scripts/, ocfs2 and fs/buffer.c

   - most of MM

  I still have quite a lot of material (mostly not MM) staged after
  linux-next due to -next dependencies. I'll send those across next week
  as the preprequisites get merged up"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
  mm/page_io.c: annotate refault stalls from swap_readpage
  mm/Kconfig: fix trivial help text punctuation
  mm/Kconfig: fix indentation
  mm/memory_hotplug.c: remove __online_page_set_limits()
  mm: fix typos in comments when calling __SetPageUptodate()
  mm: fix struct member name in function comments
  mm/shmem.c: cast the type of unmap_start to u64
  mm: shmem: use proper gfp flags for shmem_writepage()
  mm/shmem.c: make array 'values' static const, makes object smaller
  userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK
  fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register()
  userfaultfd: wrap the common dst_vma check into an inlined function
  userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb()
  userfaultfd: use vma_pagesize for all huge page size calculation
  mm/madvise.c: use PAGE_ALIGN[ED] for range checking
  mm/madvise.c: replace with page_size() in madvise_inject_error()
  mm/mmap.c: make vma_merge() comment more easy to understand
  mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops
  autonuma: reduce cache footprint when scanning page tables
  autonuma: fix watermark checking in migrate_balanced_pgdat()
  ...

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Fix several scatter gather list issues in kTLS code, from Jakub
    Kicinski.

2) macb driver device remove has to kill the hresp_err_tasklet. From
    Chuhong Yuan.

3) Several memory leak and reference count bug fixes in tipc, from Tung
    Nguyen.

4) Fix mlx5 build error w/o ipv6, from Yue Haibing.

5) Fix jumbo frame and other regressions in r8169, from Heiner
    Kallweit.

6) Undo some BUG_ON()'s and replace them with WARN_ON_ONCE and proper
    error propagation/handling. From Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (24 commits)
  openvswitch: remove another BUG_ON()
  openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()
  net: phy: realtek: fix using paged operations with RTL8105e / RTL8208
  r8169: fix resume on cable plug-in
  r8169: fix jumbo configuration for RTL8168evl
  net: emulex: benet: indent a Kconfig depends continuation line
  selftests: forwarding: fix race between packet receive and tc check
  net: sched: fix `tc -s class show` no bstats on class with nolock subqueues
  net: ethernet: ti: ale: ensure vlan/mdb deleted when no members
  net/mlx5e: Fix build error without IPV6
  selftests: pmtu: use -oneline for ip route list cache
  tipc: fix duplicate SYN messages under link congestion
  tipc: fix wrong timeout input for tipc_wait_for_cond()
  tipc: fix wrong socket reference counter after tipc_sk_timeout() returns
  tipc: fix potential memory leak in __tipc_sendmsg()
  net: macb: add missed tasklet_kill
  selftests: bpf: correct perror strings
  selftests: bpf: test_sockmap: handle file creation failures gracefully
  net/tls: use sg_next() to walk sg entries
  net/tls: remove the dead inplace_crypto code
  ...

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Various fixes:

   - Fix the PAT performance regression that downgraded write-combining
     device memory regions to uncached.

   - There's been a number of bugs in 32-bit double fault handling -
     hopefully all fixed now.

   - Fix an LDT crash

   - Fix an FPU over-optimization that broke with GCC9 code
     optimizations.

   - Misc cleanups"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pat: Fix off-by-one bugs in interval tree search
  x86/ioperm: Save an indentation level in tss_update_io_bitmap()
  x86/fpu: Don't cache access to fpu_fpregs_owner_ctx
  x86/entry/32: Remove unused 'restore_all_notrace' local label
  x86/ptrace: Document FSBASE and GSBASE ABI oddities
  x86/ptrace: Remove set_segment_reg() implementations for current
  x86/traps: die() instead of panicking on a double fault
  x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit
  x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area
  x86/doublefault/32: Rename doublefault.c to doublefault_32.c
  x86/traps: Disentangle the 32-bit and 64-bit doublefault code
  lkdtm: Add a DOUBLE_FAULT crash type on x86
  selftests/x86/single_step_syscall: Check SYSENTER directly
  x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:

- Make /sys/devices/cpu/rdpmc based RDPMC enforcement more
   instantaneous

- decoder: Update the Intel opcode map

- Various tooling fixes, including a few late optimizations and
   cleanups.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  perf script: Fix invalid LBR/binary mismatch error
  perf script: Fix brstackinsn for AUXTRACE
  perf affinity: Add infrastructure to save/restore affinity
  perf pmu: Use file system cache to optimize sysfs access
  perf regs: Make perf_reg_name() return "unknown" instead of NULL
  perf diff: Use llabs() with 64-bit values
  perf diff: Use llabs() with 64-bit values
  perf/x86: Implement immediate enforcement of /sys/devices/cpu/rdpmc value of 0
  perf tools: Allow to link with libbpf dynamicaly
  perf tests: Rename tests/map_groups.c to tests/maps.c
  perf tests: Rename thread-mg-share to thread-maps-share
  perf maps: Rename map_groups.h to maps.h
  perf maps: Rename 'mg' variables to 'maps'
  perf map_symbol: Rename ms->mg to ms->maps
  perf addr_location: Rename al->mg to al->maps
  perf thread: Rename thread->mg to thread->maps
  perf maps: Merge 'struct maps' with 'struct map_groups'
  x86/insn: perf tools: Add some more instructions to the new instructions test
  x86/insn: Add some more Intel instructions to the opcode map
  perf map: Remove unused functions
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

- updates to Ilitech driver to support ILI2117

- face lift of st1232 driver to support MT-B protocol

- a new driver for i.MX system controller keys

- mpr121 driver now supports polling mode

- various input drivers have been switched away from input_polled_dev
   to use polled mode of regular input devices

- other assorted cleanups and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits)
  Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54
  Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus
  Input: fix Kconfig indentation
  Input: imx_sc_key - correct SCU message structure to avoid stack corruption
  Input: ili210x - optionally show calibrate sysfs attribute
  Input: ili210x - add resolution to chip operations structure
  Input: ili210x - do not retrieve/print chip firmware version
  Input: mms114 - use device_get_match_data
  Input: ili210x - remove unneeded suspend and resume handlers
  Input: ili210x - do not unconditionally mark touchscreen as wakeup source
  Input: ili210x - define and use chip operations structure
  Input: ili210x - do not set parent device explicitly
  Input: ili210x - handle errors from input_mt_init_slots()
  Input: ili210x - switch to using threaded IRQ
  Input: ili210x - add ILI2117 support
  dt-bindings: input: touchscreen: ad7879: generic node names in example
  Input: ar1021 - fix typo in preprocessor macro name
  Input: synaptics-rmi4 - simplify data read in rmi_f54_work
  Input: kxtj9 - switch to using polled mode of input devices
  Input: kxtj9 - switch to using managed resources
  ...

Merge tag 'libnvdimm-for-5.5' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
"The highlight this cycle is continuing integration fixes for PowerPC
  and some resulting optimizations.

  Summary:

   - Updates to better support vmalloc space restrictions on PowerPC
     platforms.

   - Cleanups to move common sysfs attributes to core 'struct
     device_type' objects.

   - Export the 'target_node' attribute (the effective numa node if pmem
     is marked online) for regions and namespaces.

   - Miscellaneous fixups and optimizations"

* tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
  MAINTAINERS: Remove Keith from NVDIMM maintainers
  libnvdimm: Export the target_node attribute for regions and namespaces
  dax: Add numa_node to the default device-dax attributes
  libnvdimm: Simplify root read-only definition for the 'resource' attribute
  dax: Simplify root read-only definition for the 'resource' attribute
  dax: Create a dax device_type
  libnvdimm: Move nvdimm_bus_attribute_group to device_type
  libnvdimm: Move nvdimm_attribute_group to device_type
  libnvdimm: Move nd_mapping_attribute_group to device_type
  libnvdimm: Move nd_region_attribute_group to device_type
  libnvdimm: Move nd_numa_attribute_group to device_type
  libnvdimm: Move nd_device_attribute_group to device_type
  libnvdimm: Move region attribute group definition
  libnvdimm: Move attribute groups to device type
  libnvdimm: Remove prototypes for nonexistent functions
  libnvdimm/btt: fix variable 'rc' set but not used
  libnvdimm/pmem: Delete include of nd-core.h
  libnvdimm/namespace: Differentiate between probe mapping and runtime mapping
  libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe
  libnvdimm: Trivial comment fix
  ...

Merge tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

- omap : misc - catch error returned from pm_runtime_put_sync

- hisi : misc - drop .owner from platform_driver

- stm : change how wakeup is handled

- imx : fix - bailout on error and nuke correct irq

- imx : add support for imx7ulp platform

* tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: imx: add support for imx v1 mu
  dt-bindings: mailbox: imx-mu: add imx7ulp MU support
  mailbox: imx: Clear the right interrupts at shutdown
  mailbox: imx: Fix Tx doorbell shutdown path
  mailbox: stm32-ipcc: Update wakeup management
  mailbox: no need to set .owner platform_driver_register
  mailbox/omap: Handle if CONFIG_PM is disabled

Merge tag 'hwlock-v5.5' of git://git./linux/kernel/git/andersson/remoteproc

Pull hwspinlock updates from Bjorn Andersson:
"This contains a number of cleanups to the core and several drivers, in
  particular removing the requirement for drivers to implement
  pm_runtime.

  It also udpates the location of the git tree in MAINTAINERS"

* tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  hwspinlock: u8500_hsem: Remove redundant PM runtime implementation
  hwspinlock: sprd: Remove redundant PM runtime implementation
  hwspinlock: Let the PM runtime can be optional
  hwspinlock: Remove BUG_ON() from the hwspinlock core
  hwspinlock: sprd: Use devm_hwspin_lock_register() to register hwlock controller
  hwspinlock: sprd: Use devm_add_action_or_reset() for calls to clk_disable_unprepare()
  hwspinlock: sprd: Check the return value of clk_prepare_enable()
  hwspinlock: sprd: Change to use devm_platform_ioremap_resource()
  hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller
  hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory
  hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource()
  MAINTAINERS: hwspinlock: update git tree location

Merge tag 'rpmsg-v5.5' of git://git./linux/kernel/git/andersson/remoteproc

Pull rpmsg updates from Bjorn Andersson:
"This contains a number of bug fixes to the GLINK transport driver, an
  off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg
  char driver"

* tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  rpmsg: Fix Kconfig indentation
  rpmsg: char: Simplify 'rpmsg_eptdev_release()'
  rpmsg: glink: Free pending deferred work on remove
  rpmsg: glink: Don't send pending rx_done during remove
  rpmsg: glink: Fix rpmsg_register_device err handling
  rpmsg: glink: Put an extra reference during cleanup
  rpmsg: glink: Fix use after free in open_ack TIMEOUT case
  rpmsg: glink: Fix reuse intents memory leak issue
  rpmsg: glink: Set tail pointer to 0 at end of FIFO
  rpmsg: char: release allocated memory

Merge tag 'rproc-v5.5' of git://git./linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
"This adds support for booting the modem processor on Qualcomm MSM8998
  and carries some cleanup up and bug fixes to the framework and the
  stm32 driver"

* tag 'rproc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
  Revert "dt-bindings: remoteproc: stm32: add wakeup-source"
  remoteproc: stm32: fix probe error case
  remoteproc: stm32: wakeup the system by wdg irq
  dt-bindings: remoteproc: stm32: add wakeup-source
  remoteproc: Fix wrong rvring index computation
  remoteproc: stm32: use workqueue to treat mailbox callback
  remoteproc: fix argument 2 of rproc_mem_entry_init
  remoteproc: qcom_q6v5_mss: Add support for MSM8998
  dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998
  remoteproc: debug: Remove unneeded NULL check
  remoteproc: remove useless typedef

Merge branch 'i2c/for-5.5' of git://git./linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
"I2C has mostly driver updates this time.

  The few noteworthy changes are: the core has now support for analog
  and digital filters with at91 being the first user, a core addition to
  replace the NULL returning i2c_new_probed_device() with an ERR_PTR
  variant, and the pxa driver has finally being moved to use the generic
  I2C slave interface. We have quite a significant number of reviews per
  patch this time, so thank you to all involved!"

* 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
  video: fbdev: matrox: convert to i2c_new_scanned_device
  i2c: icy: convert to i2c_new_scanned_device
  i2c: replace i2c_new_probed_device with an ERR_PTR variant
  i2c: Fix Kconfig indentation
  i2c: smbus: Don't filter out duplicate alerts
  i2c: i801: Correct Intel Jasper Lake SOC naming
  i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop
  i2c: iproc: Add i2c repeated start capability
  i2c: remove helpers for ref-counting clients
  i2c: tegra: Use dma_request_chan() directly for channel request
  i2c: sh_mobile: Use dma_request_chan() directly for channel request
  i2c: qup: Use dma_request_chan() directly for channel request
  i2c: at91: Use dma_request_chan() directly for channel request
  i2c: rcar: Remove superfluous call to clk_get_rate()
  i2c: pxa: remove unused i2c-slave APIs
  i2c: pxa: migrate to new i2c_slave APIs
  i2c: cros-ec-tunnel: Make the device acpi compatible
  i2c: stm32f7: report dma error during probe
  i2c: icy: no need to populate address for scanned device
  i2c: xiic: Fix kerneldoc warnings
  ...

Merge tag 'for-linus-20191129' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"I wasn't going to send this one off so soon, but unfortunately one of
  the fixes from the previous pull broke the build on some archs. So I'm
  sending this sooner rather than later. This contains:

   - Add highmem.h include for io_uring, because of the kmap() additions
     from last round. For some reason the build bot didn't spot this
     even though it sat for days.

   - Three minor ';' removals

   - Add support for the Beurer CD-on-a-chip device

   - Make io_uring work on MMU-less archs"

* tag 'for-linus-20191129' of git://git.kernel.dk/linux-block:
  io_uring: fix missing kmap() declaration on powerpc
  ataflop: Remove unneeded semicolon
  block: sunvdc: Remove unneeded semicolon
  drbd: Remove unneeded semicolon
  io_uring: add mapping support for NOMMU archs
  sr_vendor: support Beurer GL50 evo CD-on-a-chip devices.
  cdrom: respect device capabilities during opening action

Merge tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

- New bootctl driver for Mellanox BlueField SoC.

- New driver to support System76 laptops.

- Temperature monitoring and fan control on Acer Aspire 7551 is now
   supported.

- Previously the Huawei driver handled only hotkeys. After the
   conversion to WMI it has been expanded to support newer laptop
   models.

- Big refactoring of intel-speed-select tools allows to use it on Intel
   CascadeLake-N systems.

- Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets

- Miscellaneous clean ups and fixes here and there.

* tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits)
  platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size
  platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer
  platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver
  platform/x86: intel_pmc_core: Fix the SoC naming inconsistency
  platform/mellanox: Fix Kconfig indentation
  tools/power/x86/intel-speed-select: Display TRL buckets for just base config level
  tools/power/x86/intel-speed-select: Ignore missing config level
  platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet
  tools/power/x86/intel-speed-select: Increment version
  tools/power/x86/intel-speed-select: Use core count for base-freq mask
  tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select
  tools/power/x86/intel-speed-select: Use Frequency weight for CLOS
  tools/power/x86/intel-speed-select: Make CLOS frequency in MHz
  tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG
  tools/power/x86/intel-speed-select: Auto mode for CLX
  tools/power/x86/intel-speed-select: Correct CLX-N frequency units
  tools/power/x86/intel-speed-select: Change display of "avx" to "avx2"
  tools/power/x86/intel-speed-select: Extend command set for perf-profile
  Add touchscreen platform data for the Schneider SCT101CTM tablet
  platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid

Pull HID updates from Jiri Kosina:

- Support for Logitech G15 (Hans de Goede)

- HID parser improvements, improving support for some devices; e.g.
   Windows Precision Touchpad, products from Primax, etc. (Blaž
   Hrastnik, Candle Sun)

- robustification of tablet mode support in google-whiskers driver
   (Dmitry Torokhov)

- assorted small fixes, device-specific quirks and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits)
  HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device
  HID: quirks: remove hid-led devices from hid_have_special_driver
  HID: Improve Windows Precision Touchpad detection.
  HID: i2c-hid: Reset ALPS touchpads on resume
  HID: i2c-hid: fix no irq after reset on raydium 3118
  HID: logitech-hidpp: Silence intermittent get_battery_capacity errors
  HID: i2c-hid: remove orphaned member sleep_delay
  HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse
  HID: core: check whether Usage Page item is after Usage ID items
  HID: intel-ish-hid: Spelling s/diconnect/disconnect/
  HID: google: Detect base folded usage instead of hard-coding whiskers
  HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry
  HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs
  HID: lg-g15: Add support for controlling the G510's RGB backlight
  HID: lg-g15: Add support for the G510 keyboards' gaming keys
  HID: lg-g15: Add support for the M1-M3 and MR LEDs
  HID: lg-g15: Add keyboard and LCD backlight control
  HID: Add driver for Logitech gaming keyboards (G15, G15 v2)
  Input: Add event-codes for macro keys found on various keyboards
  HID: hidraw: replace printk() with corresponding pr_xx() variant
  ...

Merge tag 'linux-watchdog-5.5-rc1' of git://linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

- support for NCT6116D

- several small fixes and improvements

* tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  watchdog: jz4740: Drop dependency on MACH_JZ47xx
  watchdog: jz4740: Use regmap provided by TCU driver
  watchdog: jz4740: Use WDT clock provided by TCU driver
  dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  watchdog: sama5d4_wdt: cleanup the bit definitions
  watchdog: sprd: Fix the incorrect pointer getting from driver data
  watchdog: aspeed: Fix clock behaviour for ast2600
  watchdog: imx7ulp: Fix reboot hang
  watchdog: make nowayout sysfs file writable
  watchdog: prevent deferral of watchdogd wakeup on RT
  watchdog: imx7ulp: Use definitions instead of magic values
  watchdog: imx7ulp: Remove inline annotations
  watchdog: imx7ulp: Remove unused structure member
  watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()
  watchdog: wdat_wdt: Spelling s/configrable/configurable/
  watchdog: bd70528: Trivial function documentation fix
  watchdog: cadence: Do not show error in case of deferred probe
  watchdog: Fix the race between the release of watchdog_core_data and cdev
  watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning
  watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
  ...

Merge tag 'gpio-v5.5-1' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.5 kernel cycle

  Core changes:

   - Expose pull up/down flags for the GPIO character device to
     userspace.

     After clear input from the RaspberryPi and Beagle communities, it
     has been established that prototyping, industrial automation and
     make communities strongly need this feature, and as we want people
     to use the character device, we have implemented the simple pull
     up/down interface for GPIO lines.

     This means we can specify that a (chip-specific) pull up/down
     resistor can be enabled, but does not offer fine-grained control
     such as cases where the resistance of the same pull resistor can be
     controlled (yet).

   - Introduce devm_fwnode_gpiod_get_index() and start to phase out the
     old symbol devm_fwnode_get_index_gpiod_from_child().

   - A bit of documentation clean-up work.

   - Introduce a define for GPIO line directions and deploy it in all
     GPIO drivers in the drivers/gpio directory.

   - Add a special callback to populate pin ranges when cooperating with
     the pin control subsystem and registering ranges as part of adding
     a gpiolib driver and a gpio_irq_chip driver at the same time. This
     is also deployed in the Intel Merrifield driver.

  New drivers:

   - RDA Micro GPIO controller.

   - XGS-iproc GPIO driver.

  Driver improvements:

   - Wake event and debounce support on the Tegra 186 driver.

   - Finalize the Aspeed SGPIO driver.

   - MPC8xxx uses a normal IRQ handler rather than a chained handler"

* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
  gpio: Add TODO item for regmap helper
  Documentation: gpio: driver.rst: Fix warnings
  gpio: of: Fix bogus reference to gpiod_get_count()
  gpiolib: Grammar s/manager/managed/
  gpio: lynxpoint: Setup correct IRQ handlers
  MAINTAINERS: Replace my email by one @kernel.org
  gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
  gpio/mpc8xxx: fix qoriq GPIO reading
  gpio: mpc8xxx: Don't overwrite default irq_set_type callback
  gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  gpiolib: fix coding style in gpiod_hog()
  drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
  gpio: merrifield: Pass irqchip when adding gpiochip
  gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
  gpiolib: Introduce ->add_pin_ranges() callback
  gpio: mmio: remove untrue leftover comment
  gpio: em: Use platform_get_irq() to obtain interrupts
  gpio: tegra186: Add debounce support
  gpio: tegra186: Program interrupt route mapping
  gpio: tegra186: Derive register offsets from bank/port
  ...

Merge tag 'mfd-next-5.5' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"Core Frameworks:
   - Add support for a "resource managed strongly uncachable ioremap"
     call
   - Provide a collection of MFD helper macros
   - Remove mfd_clone_cell() from MFD core
   - Add NULL de-reference protection in MFD core
   - Remove superfluous function fd_platform_add_cell() from MFD core
   - Honour Device Tree's request to disable a device

  New Drivers:
   - Add support for MediaTek MT6323 PMIC

  New Device Support:
   - Add support for Gemini Lake to Intel LPSS PCI
   - Add support for Cherry Trail Crystal Cover PMIC to Intel SoC PMIC
     CRC
   - Add support for PM{I}8950 to Qualcomm SPMI PMIC
   - Add support for U8420 to ST-Ericsson DB8500
   - Add support for Comet Lake PCH-H to Intel LPSS PCI

  New Functionality:
   - Add support for requested supply clocks; madera-core

  Fix-ups:
   - Lower interrupt priority; rk808
   - Use provided helpers (macros, group functions, defines); rk808,
     ipaq-micro, ab8500-core, db8500-prcmu, mt6397-core, cs5535-mfd
   - Only allocate IRQs on request; max77620
   - Use simplified API; arizona-core
   - Remove redundant and/or duplicated code; wm8998-tables, arizona,
     syscon
   - Device Tree binding fix-ups; madera, max77650, max77693
   - Remove mfd_cell->id abuse hack; cs5535-mfd
   - Remove only user of mfd_clone_cell(); cs5535-mfd
   - Make resources static; rohm-bd70528

  Bug Fixes:
   - Fix product ID for RK818; rk808
   - Fix Power Key; rk808
   - Fix booting on the BananaPi; mt6397-core
   - Endian fix-ups; twl.h
   - Fix static error checker warnings; ti_am335x_tscadc"

* tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits)
  Revert "mfd: syscon: Set name of regmap_config"
  mfd: ti_am335x_tscadc: Fix static checker warning
  mfd: bd70528: Staticize bit value definitions
  mfd: mfd-core: Honour Device Tree's request to disable a child-device
  dt-bindings: mfd: max77693: Fix missing curly brace
  mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs
  mfd: db8500-prcmu: Support U8420-sysclk firmware
  dt-bindings: mfd: max77650: Convert the binding document to yaml
  mfd: mfd-core: Move pdev->mfd_cell creation back into mfd_add_device()
  mfd: mfd-core: Remove usage counting for .{en,dis}able() call-backs
  x86: olpc-xo1-sci: Remove invocation of MFD's .enable()/.disable() call-backs
  x86: olpc-xo1-pm: Remove invocation of MFD's .enable()/.disable() call-backs
  mfd: mfd-core: Remove mfd_clone_cell()
  mfd: mfd-core: Protect against NULL call-back function pointer
  mfd: cs5535-mfd: Register clients using their own dedicated MFD cell entries
  mfd: cs5535-mfd: Request shared IO regions centrally
  mfd: cs5535-mfd: Remove mfd_cell->id hack
  mfd: cs5535-mfd: Use PLATFORM_DEVID_* defines and tidy error message
  mfd: intel_soc_pmic_crc: Add "cht_crystal_cove_pmic" cell to CHT cells
  mfd: madera: Add support for requesting the supply clocks
  ...

Merge tag 'backlight-next-5.5' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
"New Functionality:
   - Add support for an enable GPIO; lm3630a_bl
   - Add support for short circuit handling; qcom-wled
   - Add support for automatic string detection; qcom-wled

  Fix-ups:
   - Update Device Tree bindings; lm3630a-backlight, led-backlight,
     qcom-wled
   - Constify; ipaq_micro_bl
   - Optimise for CPU cycles; pwm_bl
   - Coding style fix-ups; pwm_bl
   - Trivial fix-ups (white space, comments, renaming); pwm_bl,
     gpio_backlight, qcom-wled
   - Kconfig dependency hacking; LCD_HP700
   - Rename, refactor and add peripherals; pm8941-wled => qcom-wled
   - Make use of GPIO look-up tables; tosa_bl, tosa_lcd
   - Remove superfluous code; gpio_backlight
   - Adapt GPIO direction handling; gpio_backlight
   - Remove legacy use of platform data; gpio_backlight

  Bug Fixes:
   - Provide modules aliases; lm3630a_bl"

* tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
  backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered"
  backlight: gpio: Pull gpio_backlight_initial_power_state() into probe
  backlight: gpio: Use a helper variable for &pdev->dev
  backlight: gpio: Remove unused fields from platform data
  sh: ecovec24: don't set unused fields in platform data
  backlight: gpio: Simplify the platform data handling
  sh: ecovec24: add additional properties to the backlight device
  backlight: gpio: Explicitly set the direction of the GPIO
  backlight: gpio: Remove stray newline
  backlight: gpio: Remove unneeded include
  video: backlight: tosa: Use GPIO lookup table
  backlight: qcom-wled: Add auto string detection logic
  backlight: qcom-wled: Add support for short circuit handling
  backlight: qcom-wled: Add support for WLED4 peripheral
  backlight: qcom-wled: Restructure the driver for WLED3
  backlight: qcom-wled: Rename PM8941* to WLED3
  backlight: qcom-wled: Add new properties for PMI8998
  backlight: qcom-wled: Restructure the qcom-wled bindings
  backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  dt-bindings: backlight: lm3630a: Fix missing include
  ...

Merge tag 'pinctrl-v5.5-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fix from Linus Walleij:
"A oneliner fix adding the license to the new Intel pin controller,
avoiding a build-time warning"

* tag 'pinctrl-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: Fix warning by adding missing MODULE_LICENSE

Merge tag 'leds-5.5-rc1' of git://git./linux/kernel/git/pavel/linux-leds

Pull LED updates from Pavel Machek:
"This contains usual small updates to drivers, and removal of PAGE_SIZE
  limits on /sys/class/leds/<led>/trigger.

  We should not be really having that many triggers; but with cpu
  activity triggers we do, and we'll eventually need to fix it, but...
  remove the limit for now"

* tag 'leds-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (26 commits)
  leds: trigger: netdev: fix handling on interface rename
  leds: an30259a: add a check for devm_regmap_init_i2c
  leds: mlxreg: Fix possible buffer overflow
  leds: pca953x: Use of_device_get_match_data()
  leds: core: Fix leds.h structure documentation
  leds: core: Fix devm_classdev_match to reference correct structure
  leds: core: Remove extern from header
  leds: lm3601x: Convert class registration to device managed
  leds: flash: Add devm_* functions to the flash class
  leds: flash: Remove extern from the header file
  leds: flash: Convert non extended registration to inline
  leds: Kconfig: Be consistent with the usage of "LED"
  leds: remove PAGE_SIZE limit of /sys/class/leds/<led>/trigger
  leds: tlc591xx: update the maximum brightness
  leds: lm3692x: Use flags from LM3692X_BRT_CTRL
  leds: lm3692x: Use flags from LM3692X_BOOST_CTRL
  leds: lm3692x: Handle failure to probe the regulator
  leds: lm3692x: Don't overwrite return value in error path
  leds: lm3692x: Print error value on dev_err
  leds: tlc591xx: use devm_led_classdev_register_ext()
  ...

Merge tag 'clk-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This merge window we have one small clk provider API in the core
  framework and then a bunch of driver updates and a handful of new
  drivers. In terms of diffstat the Qualcomm and Amlogic drivers are
  high up there because of all the clk data introcued by new drivers.
  The Nvidia Tegra driver had a lot of work done this cycle too to
  support suspend/resume and memory controllers. And the OMAP clk driver
  got proper clk and reset handling in place.

  Rounding out the patches are various updates to remove unused data,
  mark things static, correct incorrect data in drivers, etc. All the
  little things that improve drivers and maintain code health. I will
  point out that there's a patch in here for the GPIO clk driver, that
  almost nobody uses, which changes behavior and causes clk_set_rate()
  to try to change the GPIO gate clk's parent. Other than that things
  are fairly well SoC specific here.

  Core:
   - Add a clk provider API to get current parent index
   - Plug a memory leak in clk_unregister() path

  New Drivers:
   - CGU in Ingenix X1000
   - Bitmain BM1880 clks
   - Qualcomm MSM8998 GPU clk controllers
   - Qualcomm SC7180 GCC and RPMH clk controllers
   - Qualcomm QCS404 Q6SSTOP clk controllers
   - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
   - Add support for the Renesas RZ/G2N (r8a774b1) SoC
   - Add Tegra20/30 External Memory Clock (EMC) support

  Updates:
   - Make gpio gate clks propagate rate setting up to parent
   - Prepare Armada 3700 for suspend to RAM by moving PCIe
     suspend/resume priority
   - Drop unused variables, enums, etc. in various clk drivers
   - Convert various drivers to use devm_platform_ioremap_resource()
   - Use struct_size() some more in various clk drivers
   - Improve Rockchip px30 clk tree
   - Add suspend/resume support to Tegra210 clk driver
   - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
   - Allwinner DT exports and H6 clk tree fixes
   - Proper clk and reset handling for OMAP SoCs
   - Revamped TI divider clk to clamp max divider
   - Make 1443X/1416X PLL clock structure common for reusing among i.MX8
     SoCs
   - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
   - Add VIDEO2_PLL clock for imx8mq
   - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
   - Add sm1 support in the Amlogic audio clock controller
   - Switch some clocks on R-Car Gen2/3 to .determine_rate()
   - Remove Renesas R-Car Gen2 legacy DT clock support
   - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
   - Improve Renesas R-Car Gen3 SD clock handling
   - Add rate table for Samsung exynos542x GPU and VPLL clks
   - Fix potential CPU performance degradation after system
     suspend/resume cycle on exynos542x SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits)
  clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
  MAINTAINERS: Add entry for BM1880 SoC clock driver
  clk: Add common clock driver for BM1880 SoC
  dt-bindings: clock: Add devicetree binding for BM1880 SoC
  clk: Add clk_hw_unregister_composite helper function definition
  clk: Zero init clk_init_data in helpers
  clk: ingenic: Allow drivers to be built with COMPILE_TEST
  MAINTAINERS: Update section for Ux500 clock drivers
  clk: mark clk_disable_unused() as __init
  clk: Fix memory leak in clk_unregister()
  clk: Ingenic: Add CGU driver for X1000.
  dt-bindings: clock: Add X1000 bindings.
  clk: tegra: Use match_string() helper to simplify the code
  clk: pxa: fix one of the pxa RTC clocks
  clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
  clk: armada-xp: remove unused code
  clk: tegra: Fix build error without CONFIG_PM_SLEEP
  clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
  clk: tegra: Optimize PLLX restore on Tegra20/30
  clk: tegra: Add suspend and resume support on Tegra210
  ...

Merge tag 'y2038-cleanups-5.5' of git://git./linux/kernel/git/arnd/playground

Pull y2038 cleanups from Arnd Bergmann:
"y2038 syscall implementation cleanups

  This is a series of cleanups for the y2038 work, mostly intended for
  namespace cleaning: the kernel defines the traditional time_t, timeval
  and timespec types that often lead to y2038-unsafe code. Even though
  the unsafe usage is mostly gone from the kernel, having the types and
  associated functions around means that we can still grow new users,
  and that we may be missing conversions to safe types that actually
  matter.

  There are still a number of driver specific patches needed to get the
  last users of these types removed, those have been submitted to the
  respective maintainers"

Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/
* tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits)
  y2038: alarm: fix half-second cut-off
  y2038: ipc: fix x32 ABI breakage
  y2038: fix typo in powerpc vdso "LOPART"
  y2038: allow disabling time32 system calls
  y2038: itimer: change implementation to timespec64
  y2038: move itimer reset into itimer.c
  y2038: use compat_{get,set}_itimer on alpha
  y2038: itimer: compat handling to itimer.c
  y2038: time: avoid timespec usage in settimeofday()
  y2038: timerfd: Use timespec64 internally
  y2038: elfcore: Use __kernel_old_timeval for process times
  y2038: make ns_to_compat_timeval use __kernel_old_timeval
  y2038: socket: use __kernel_old_timespec instead of timespec
  y2038: socket: remove timespec reference in timestamping
  y2038: syscalls: change remaining timeval to __kernel_old_timeval
  y2038: rusage: use __kernel_old_timeval
  y2038: uapi: change __kernel_time_t to __kernel_old_time_t
  y2038: stat: avoid 'time_t' in 'struct stat'
  y2038: ipc: remove __kernel_time_t reference from headers
  y2038: vdso: powerpc: avoid timespec references
  ...

Merge tag 'compat-ioctl-5.5' of git://git./linux/kernel/git/arnd/playground

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
"As part of the cleanup of some remaining y2038 issues, I came to
  fs/compat_ioctl.c, which still has a couple of commands that need
  support for time64_t.

  In completely unrelated work, I spent time on cleaning up parts of
  this file in the past, moving things out into drivers instead.

  After Al Viro reviewed an earlier version of this series and did a lot
  more of that cleanup, I decided to try to completely eliminate the
  rest of it and move it all into drivers.

  This series incorporates some of Al's work and many patches of my own,
  but in the end stops short of actually removing the last part, which
  is the scsi ioctl handlers. I have patches for those as well, but they
  need more testing or possibly a rewrite"

* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
  scsi: sd: enable compat ioctls for sed-opal
  pktcdvd: add compat_ioctl handler
  compat_ioctl: move SG_GET_REQUEST_TABLE handling
  compat_ioctl: ppp: move simple commands into ppp_generic.c
  compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
  compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
  compat_ioctl: unify copy-in of ppp filters
  tty: handle compat PPP ioctls
  compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
  compat_ioctl: handle SIOCOUTQNSD
  af_unix: add compat_ioctl support
  compat_ioctl: reimplement SG_IO handling
  compat_ioctl: move WDIOC handling into wdt drivers
  fs: compat_ioctl: move FITRIM emulation into file systems
  gfs2: add compat_ioctl support
  compat_ioctl: remove unused convert_in_user macro
  compat_ioctl: remove last RAID handling code
  compat_ioctl: remove /dev/raw ioctl translation
  compat_ioctl: remove PCI ioctl translation
  compat_ioctl: remove joystick ioctl translation
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull sysctl system call removal from Eric Biederman:
"As far as I can tell we have reached the point where no one enables
  the sysctl system call anymore. It still is enabled in a few
  defconfigs but they are mostly the rarely used one and in asking
  people about that it was more cut & paste enabled than anything else.

  This is single commit that just deletes code. Leaving just enough code
  so that the deprecated sysctl warning continues to be printed. If my
  analysis turns out to be wrong and someone actually cares it will be
  easy to revert this commit and have the system call again.

  There was one new xtensa defconfig in linux-next that enabled the
  system call this cycle and when asked about it the maintainer of the
  code replied that it was not enabled on purpose. As of today's
  linux-next tree that defconfig no longer enables the system call.

  What we saw in the review discussion was that if we go a step farther
  than my patch and mess with uapi headers there are pieces of code that
  won't compile, but nothing minds the system call actually disappearing
  from the kernel"

Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sysctl: Remove the sysctl system call

Merge branch 'openvswitch-remove-a-couple-of-BUG_ON'

Paolo Abeni says:

====================
openvswitch: remove a couple of BUG_ON()

The openvswitch kernel datapath includes some BUG_ON() statements to check
for exceptional/unexpected failures. These patches drop a couple of them,
where we can do that without introducing other side effects.

v1 -> v2:
- avoid memory leaks on error path
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: remove another BUG_ON()

If we can't build the flow del notification, we can simply delete
the flow, no need to crash the kernel. Still keep a WARN_ON to
preserve debuggability.

Note: the BUG_ON() predates the Fixes tag, but this change
can be applied only after the mentioned commit.

v1 -> v2:
- do not leak an skb on error

Fixes: aed067783e50 ("openvswitch: Minimize ovs_flow_cmd_del critical section.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info()

All the callers of ovs_flow_cmd_build_info() already deal with
error return code correctly, so we can handle the error condition
in a more gracefull way. Still dump a warning to preserve
debuggability.

v1 -> v2:
- clarify the commit message
- clean the skb and report the error (DaveM)

Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: realtek: fix using paged operations with RTL8105e / RTL8208

It was reported [0] that since the referenced commit a warning is
triggered in phylib that complains about paged operations being used
with a PHY driver that doesn't support this. The commit isn't wrong,
just for one chip version (RTL8105e) no dedicated PHY driver exists
yet. So add the missing PHY driver.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202103

Fixes: 3a129e3f9ac4 ("r8169: switch to phylib functions in more places")
Reported-by: jhdskag3 <jhdskag3@tutanota.com>
Tested-by: jhdskag3 <jhdskag3@tutanota.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: fix resume on cable plug-in

It was reported [0] that network doesn't wake up on cable plug-in with
certain chip versions. Reason is that on these chip versions the PHY
doesn't detect cable plug-in when being in power-down mode. So prevent
the PHY from powering down if WoL is enabled.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202103

Fixes: 95fb8bb3181b ("net: phy: force phy suspend when calling phy_stop")
Reported-by: jhdskag3 <jhdskag3@tutanota.com>
Tested-by: jhdskag3 <jhdskag3@tutanota.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8169: fix jumbo configuration for RTL8168evl

Alan reported [0] that network is broken since the referenced commit
when using jumbo frames. This commit isn't wrong, it just revealed
another issue that has been existing before. According to the vendor
driver the RTL8168e-specific jumbo config doesn't apply for RTL8168evl.

[0] https://lkml.org/lkml/2019/11/30/119

Fixes: 4ebcb113edcc ("r8169: fix jumbo packet handling on resume from suspend")
Reported-by: Alan J. Wylie <alan@wylie.me.uk>
Tested-by: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mm/page_io.c: annotate refault stalls from swap_readpage

If a block device supports rw_page operation, it doesn't submit bios so
the annotation in submit_bio() for refault stall doesn't work. It
happens with zram in android, especially swap read path which could
consume CPU cycle for decompress. It is also a problem for zswap which
uses frontswap.

Annotate swap_readpage() to account the synchronous IO overhead to
prevent underreport memory pressure.

[akpm@linux-foundation.org: add comment, per Johannes]
Link: http://lkml.kernel.org/r/20191010152134.38545-1-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/Kconfig: fix trivial help text punctuation

End a Kconfig help text sentence with a period (aka full stop).

Link: http://lkml.kernel.org/r/c17f2c75-dc2a-42a4-2229-bb6b489addf2@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>