Daniel Vetter [Wed, 8 Jun 2016 12:19:16 +0000 (14:19 +0200)]
drm: Resurrect atomic rmfb code
This was somehow lost between v3 and the merged version in Maarten's
patch merged as:
commit
f2d580b9a8149735cbc4b59c4a8df60173658140
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed May 4 14:38:26 2016 +0200
drm/core: Do not preserve framebuffer on rmfb, v4.
Actual code copied from Maarten's patch, but with the slight change to
just use dev->mode_config.funcs->atomic_commit to decide whether to
use the atomic path or not.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-24-git-send-email-daniel.vetter@ffwll.ch
Chris Wilson [Tue, 12 Jul 2016 12:04:50 +0000 (13:04 +0100)]
drm/vgem: Use PAGE_KERNEL in place of x86-specific PAGE_KERNEL_IO
Since PAGE_KERNEL_IO is specific to x86 and equivalent to PAGE_KERNEL
for our wrapping with pgprot_writecombine(), just use the common define.
drivers/gpu/drm/vgem/vgem_drv.c: In function 'vgem_prime_vmap':
>> drivers/gpu/drm/vgem/vgem_drv.c:238:53: error: 'PAGE_KERNEL_IO' undeclared (first use in this function)
addr = vmap(pages, n_pages, 0, pgprot_writecombine(PAGE_KERNEL_IO));
Reported-by: 0day
Fixes: e6f15b763ab2 ("drm/vgem: Enable dmabuf interface for export")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468325090-27966-1-git-send-email-chris@chris-wilson.co.uk
Dan Carpenter [Mon, 11 Jul 2016 08:47:16 +0000 (11:47 +0300)]
qxl: silence uninitialized variable warning
GCC doesn't complain about this but my static checker does. We're
passing "drawable" before initializing it. It's not actually used so
it's harmless and I just removed it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160711084716.GB31411@mwanda
Dan Carpenter [Mon, 11 Jul 2016 08:46:33 +0000 (11:46 +0300)]
qxl: check for kmap failures
If kmap fails, it leads to memory corruption.
Fixes: f64122c1f6ad ('drm: add new QXL driver. (v1.4)')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160711084633.GA31411@mwanda
Lukas Wunner [Mon, 11 Jul 2016 08:22:33 +0000 (10:22 +0200)]
vga_switcheroo: Sphinxify docs
Fix up formatting glitches remaining after the automatic rst conversion.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/3a369602ae35fdbf5e4a12f7e172088c89fa27bb.1468225027.git.lukas@wunner.de
Chris Wilson [Thu, 7 Jul 2016 08:41:12 +0000 (09:41 +0100)]
drm: Restore double clflush on the last partial cacheline
This effectively reverts
commit
afcd950cafea6e27b739fe7772cbbeed37d05b8b
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jun 10 15:58:01 2015 +0100
drm: Avoid the double clflush on the last cache line in drm_clflush_virt_range()
as we have observed issues with serialisation of the clflush operations
on Baytrail+ Atoms with partial updates. Applying the double flush on the
last cacheline forces that clflush to be ordered with respect to the
previous clflush, and the mfence then protects against prefetches crossing
the clflush boundary.
The same issue can be demonstrated in userspace with igt/gem_exec_flush.
Fixes: afcd950cafea6 (drm: Avoid the double clflush on the last cache...)
Testcase: igt/gem_concurrent_blit
Testcase: igt/gem_partial_pread_pwrite
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92845
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Akash Goel <akash.goel@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467880930-23082-6-git-send-email-chris@chris-wilson.co.uk
Peter Chen [Tue, 5 Jul 2016 02:04:48 +0000 (10:04 +0800)]
gpu: drm: rockchip_drm_drv: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467684294-20111-2-git-send-email-peter.chen@nxp.com
Peter Chen [Tue, 5 Jul 2016 02:04:52 +0000 (10:04 +0800)]
gpu: drm: sti_vtg: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467684294-20111-6-git-send-email-peter.chen@nxp.com
Peter Chen [Tue, 5 Jul 2016 02:04:51 +0000 (10:04 +0800)]
gpu: drm: sti_hqvdp: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467684294-20111-5-git-send-email-peter.chen@nxp.com
Peter Chen [Tue, 5 Jul 2016 02:04:50 +0000 (10:04 +0800)]
gpu: drm: sti_vdo: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467684294-20111-4-git-send-email-peter.chen@nxp.com
Peter Chen [Tue, 5 Jul 2016 02:04:49 +0000 (10:04 +0800)]
gpu: drm: sti_compositor: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467684294-20111-3-git-send-email-peter.chen@nxp.com
Gustavo Padovan [Tue, 5 Jul 2016 00:04:52 +0000 (21:04 -0300)]
drm/tilcdc: use drm_crtc_handle_vblank()
Remove legacy usage of drm_handle_vblank()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-6-git-send-email-gustavo@padovan.org
Gustavo Padovan [Tue, 5 Jul 2016 00:04:51 +0000 (21:04 -0300)]
drm/rcar-du: use drm_crtc_handle_vblank()
Remove legacy usage of drm_handle_vblank()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-5-git-send-email-gustavo@padovan.org
Gustavo Padovan [Tue, 5 Jul 2016 00:04:50 +0000 (21:04 -0300)]
drm/nouveau: use drm_crtc_handle_vblank()
Remove legacy usage of drm_handle_vblank()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-4-git-send-email-gustavo@padovan.org
Gustavo Padovan [Tue, 5 Jul 2016 00:04:49 +0000 (21:04 -0300)]
drm/atmel: use drm_crtc_handle_vblank()
Remove legacy usage of drm_handle_vblank()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-3-git-send-email-gustavo@padovan.org
Gustavo Padovan [Tue, 5 Jul 2016 00:04:48 +0000 (21:04 -0300)]
drm/armada: use drm_crtc_handle_vblank()
Remove legacy usage of drm_handle_vblank()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-2-git-send-email-gustavo@padovan.org
Gustavo Padovan [Tue, 5 Jul 2016 00:04:47 +0000 (21:04 -0300)]
drm: make drm_vblank_count_and_time() static
As they are not used anywhere outside drm_irq.c make them static.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-1-git-send-email-gustavo@padovan.org
Dan Carpenter [Fri, 1 Jul 2016 13:59:34 +0000 (16:59 +0300)]
drm/mediatek/mtk_mipi_tx: checking the wrong variable
We should be checking "phy_provider" here not "phy".
Fixes: 2e54c14e310f ('drm/mediatek: Add DSI sub driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160701135934.GA15723@mwanda
Bhaktipriya Shridhar [Sat, 2 Jul 2016 11:02:09 +0000 (16:32 +0530)]
drm/qxl: Remove deprecated create_singlethread_workqueue
System workqueues have been able to handle high level of concurrency
for a long time now and there's no reason to use dedicated workqueues
just to gain concurrency. Since the workqueue in the QXL graphics device
driver is involved in freeing and processing the release ring
(workitem &qdev->gc_workqxl, maps to gc_work which calls
qxl_garbage_collect) and is not being used on a memory reclaim path,
dedicated gc_queue has been replaced with the use of system_wq.
Unlike a dedicated per-cpu workqueue created with create_workqueue(),
system_wq allows multiple work items to overlap executions even on
the same CPU; however, a per-cpu workqueue doesn't have any CPU
locality or global ordering guarantees unless the target CPU is
explicitly specified and thus the increase of local concurrency
shouldn't make any difference.
flush_work() has been called in qxl_device_fini() to ensure that there
are no pending tasks while disconnecting the driver.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160702110209.GA3560@Karyakshetra
Xinliang Liu [Thu, 30 Jun 2016 09:23:00 +0000 (17:23 +0800)]
drm/hisilicon: Fix ADE vblank on/off handling
Vblank turn on should be called in crtc's enable callback.
And turn off called in crtc's disable callback.
Thanks to Daniel Vetter, this bug is reported by him.
Reported-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160630092300.141864-1-xinliang.liu@linaro.org
Alexey Khoroshilov [Wed, 29 Jun 2016 21:52:15 +0000 (00:52 +0300)]
drm_aux-dev: fix error handling in drm_dp_aux_dev_init()
If class_create() fails, there is no need for class_destroy().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467237135-13075-1-git-send-email-khoroshilov@ispras.ru
Benjamin Herrenschmidt [Mon, 27 Jun 2016 09:00:23 +0000 (19:00 +1000)]
drm: Fix broken use of _PAGE_NO_CACHE on powerpc
That constant isn't meant to be used outside of arch mm code
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467018023.20278.65.camel@kernel.crashing.org
Thierry Reding [Mon, 13 Jun 2016 13:33:27 +0000 (15:33 +0200)]
drm/dsi: Make set_tear_scanline command consistent
Use a consistent name for the function that implements set_tear_scanline
and reword and reformat the kerneldoc slightly.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160613133327.7630-1-thierry.reding@gmail.com
Thierry Reding [Fri, 24 Jun 2016 17:15:18 +0000 (18:15 +0100)]
drm/qxl: Remove dead code
The QXL driver sets DRIVER_MODESET unconditionally, so testing for the
absence of the feature will always fail.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466788520-21325-5-git-send-email-frank.binns@imgtec.com
Frank Binns [Fri, 24 Jun 2016 17:15:15 +0000 (18:15 +0100)]
drm/vmwgfx: Stop checking minor type directly
Use the appropriate drm minor type helper instead.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466788520-21325-2-git-send-email-frank.binns@imgtec.com
Chris Wilson [Fri, 24 Jun 2016 14:36:21 +0000 (15:36 +0100)]
drm/udl: Unplugging a device now unregisters it
Rather than manually perform our unregistration actions before shutting
down the device, move them to drm_unplug_dev().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466778982-6974-4-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 24 Jun 2016 14:36:20 +0000 (15:36 +0100)]
drm: Do a full device unregister when unplugging
Rather than do a partial unregister of just the minors, unregister the
device (drm_dev_unregister(), and so remove all userspace interfaces,
when the device is unplugged (drm_unplug_dev()).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466778982-6974-3-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 24 Jun 2016 14:36:18 +0000 (15:36 +0100)]
drm: Unexport drm_connector_register_all()
This has now been removed from all drivers as it is performed centrally
as a part of device registration for modesetting drivers. With the last
user gone, we can unexport it from the DRM module.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466778982-6974-1-git-send-email-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/1466778982-6974-2-git-send-email-chris@chris-wilson.co.uk
Tobias Jakobi [Fri, 24 Jun 2016 11:52:48 +0000 (13:52 +0200)]
drm/exynos: make fbdev support really optional
Currently enabling Exynos DRM support automatically pulls in
lots of fbdev dependencies. However these deps are
unnecessary since DRM core already enables them when
needed.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466769168-31602-1-git-send-email-tjakobi@math.uni-bielefeld.de
Michel Dänzer [Fri, 24 Jun 2016 07:59:47 +0000 (16:59 +0900)]
drm: Only handle _DRM_VBLANK_NEXTONMISS once
Consolidate the _DRM_VBLANK_NEXTONMISS handling between drm_wait_vblank
and drm_queue_vblank_event.
This is a cleanup spotted while working on other changes.
(The way it was previously handled could also theoretically result in
drm_queue_vblank_event unnecessarily bumping vblwait->request.sequence,
if the vblank counter happened to increment between the
drm_vblank_count(_and_time) calls in each function, but that's unlikely)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466755187-29418-1-git-send-email-michel@daenzer.net
Chris Wilson [Mon, 11 Jul 2016 13:08:07 +0000 (14:08 +0100)]
drm/vgem: Enable dmabuf interface for export
Enable the standard GEM dma-buf interface provided by the DRM core, but
only for exporting the VGEM object. This allows passing around the VGEM
objects created from the dumb interface and using them as sources
elsewhere. Creating a VGEM object for a foriegn handle is not supported.
v2: With additional completeness.
v3: Need to clear the CPU cache upon exporting the dma-addresses.
v4: Use drm_gem_put_pages() as well.
v5: Use drm_prime_pages_to_sg()
Testcase: igt/vgem_basic/dmabuf-*
Testcase: igt/prime_vgem
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Zach Reizner <zachr@google.com>
Acked-by: Zach Reizner <zachr@google.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468242488-1505-3-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Thu, 23 Jun 2016 14:35:32 +0000 (15:35 +0100)]
drm/vgem: Fix mmaping
The vGEM mmap code has bitrotted slightly and now immediately BUGs.
Since vGEM was last updated, there are new core GEM facilities to
provide more common functions, so let's use those here.
v2: drm_gem_free_mmap_offset() is performed from
drm_gem_object_release() so we can remove the redundant call.
Testcase: igt/vgem_basic/mmap
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96603
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Zach Reizner <zachr@google.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Tested-by: Humberto Israel Perez Rodriguez <humberto.i.perez.rodriguez@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466692534-28303-1-git-send-email-chris@chris-wilson.co.uk
Masanari Iida [Wed, 29 Jun 2016 23:47:06 +0000 (08:47 +0900)]
drm: Fix a typo in drm_ioctl.c
This patch fix a spelling typo found in
Documentation/DocBook/gpu/API-drm-ioctl-flags.html
It is because the html file was created from comments in source,
I have to fix the source.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160629234706.31209-1-standby24x7@gmail.com
Frank Binns [Fri, 24 Jun 2016 10:15:37 +0000 (11:15 +0100)]
drm: fix some spelling mistakes
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466763337-27428-1-git-send-email-frank.binns@imgtec.com
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/nouveau/dispnv04: Use helper to turn off CRTC
Use shiny new drm_crtc_force_disable() instead of open coding the same.
No functional change intended.
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/95bfab0175ea327f777d43dcc18034bf42ca2287.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/i2c/ch7006: Use helper to turn off CRTC
Use shiny new drm_crtc_force_disable() instead of open coding the same.
No functional change intended.
Cc: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ec7d5c06e2a21dfb8f9fc9413d3e6df86d6aa1fb.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm: Use helper to turn off CRTC
Use shiny new drm_crtc_force_disable() instead of open coding the same.
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/fce52e55fa5a3a2c1436205d26fc1cec70d01eea.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/amdgpu: Turn off CRTCs on driver unload
amdgpu leaks a runtime pm ref if at least one CRTC is enabled on unload.
The ref is taken by amdgpu_crtc_set_config() and held as long as a CRTC
is in use. Fix by turning off all CRTCs on unload.
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/7bf8d9ceb9d343a7495788667e6da170b8fd3af1.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/radeon: Turn off CRTCs on driver unload
radeon leaks a runtime pm ref if at least one CRTC is enabled on unload.
The ref is taken by radeon_crtc_set_config() and held as long as a CRTC
is in use. Fix by turning off all CRTCs on unload.
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/f706b9db319e2bdaf153966a2b95a5d80f67e09b.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/nouveau: Turn off CRTCs on driver unload
nouveau leaks a runtime pm ref if at least one CRTC is enabled on
unload. The ref is taken by nouveau_crtc_set_config() and held as long
as a CRTC is in use.
nv04_display_destroy() should solve this by turning off all CRTCs, but
(1) nv50_display_destroy() doesn't do the same and
(2) it's broken since commit
d6bf2f370703 ("drm/nouveau: run mode_config
destructor before destroying internal display state") because the
crtc structs are torn down by drm_mode_config_cleanup() before being
turned off. Also, there's no locking.
Move the code to turn off all CRTCs from nv04_display_destroy() to
nouveau_display_destroy() so that it's called for both nv04 and nv50
and before drm_mode_config_cleanup(). Use drm_crtc_force_disable_all()
helper to save on code and have proper locking.
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/66daa161322444bbde05d83cb0210b90a66988a4.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm: Add helpers to turn off CRTCs
Turning off a single CRTC or all active CRTCs of a DRM device is a
fairly common pattern. Add helpers to avoid open coding this everywhere.
The name was chosen to be consistent with drm_plane_force_disable().
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/amdgpu: Forbid runtime pm on driver unload
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(),
making this the default state when amdgpu is loaded.
amdgpu_driver_load_kms() therefore calls pm_runtime_allow(), but there's
no pm_runtime_forbid() in amdgpu_driver_unload_kms() to balance it. Add
it so that we leave the device in the same state that we found it.
This isn't a bug, it's just good housekeeping. When amdgpu is first
loaded with runpm=1, then unloaded and loaded again with runpm=0,
pm_runtime_forbid() will be called from amdgpu_pmops_runtime_idle() or
amdgpu_pmops_runtime_suspend(), so the behaviour is correct. If there
ever is a third party driver for AMD cards, this commit avoids that it
has to clean up behind amdgpu.
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/ccd4f7208acbd7761364418fc34f7849acbb4597.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/amdgpu: Don't leak runtime pm ref on driver load
If an error occurs in amdgpu_device_init() after adev->rmmio has been
set, its caller amdgpu_driver_load_kms() will skip runtime pm
initialization and call amdgpu_driver_unload_kms(), which acquires a
runtime pm ref that is leaked.
Balance by releasing a runtime pm ref in the error path of
amdgpu_driver_load_kms().
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/9a53449865759d7499a439ca2776093ee117b1eb.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/amdgpu: Don't leak runtime pm ref on driver unload
amdgpu_driver_load_kms() calls pm_runtime_put_autosuspend() if
amdgpu_device_is_px(dev), but amdgpu_driver_unload_kms() calls
pm_runtime_get_sync() unconditionally. We therefore leak a runtime pm
ref whenever amdgpu is unloaded on a non-PX machine or if runpm=0. The
GPU will subsequently never runtime suspend after loading amdgpu again.
Fix by taking the runtime pm ref under the same condition that it was
released on driver load.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/86364eeb5711323608930c4f0f69046792ff6d3c.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/radeon: Forbid runtime pm on driver unload
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(),
making this the default state when radeon is loaded.
radeon_driver_load_kms() therefore calls pm_runtime_allow(), but there's
no pm_runtime_forbid() in radeon_driver_unload_kms() to balance it. Add
it so that we leave the device in the same state that we found it.
This isn't a bug, it's just good housekeeping. When radeon is first
loaded with runpm=1, then unloaded and loaded again with runpm=0,
pm_runtime_forbid() will be called from radeon_pmops_runtime_idle() or
radeon_pmops_runtime_suspend(), so the behaviour is correct. If there
ever is a third party driver for AMD cards, this commit avoids that it
has to clean up behind radeon.
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/25a3e20b786fd66b10f40fa24c61dd36c33270da.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/radeon: Don't leak runtime pm ref on driver load
radeon_device_init() returns an error if either of the two calls to
radeon_init() fail. One level up in the call stack,
radeon_driver_load_kms() will then skip runtime pm initialization and
call radeon_driver_unload_kms(), which acquires a runtime pm ref that
is leaked.
Balance by releasing a runtime pm ref in the error path of
radeon_device_init().
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/fa5bb977c1fe00474acedae5b03232dbf0b49410.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/radeon: Don't leak runtime pm ref on driver unload
radeon_driver_load_kms() calls pm_runtime_put_autosuspend() if
radeon_is_px(dev), but radeon_driver_unload_kms() calls
pm_runtime_get_sync() unconditionally. We therefore leak a runtime pm
ref whenever radeon is unloaded on a non-PX machine or if runpm=0. The
GPU will subsequently never runtime suspend after loading radeon again.
Fix by taking the runtime pm ref under the same condition that it was
released on driver load.
Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/aaf71106c042126817aeca8b8e54ed468ab61ef7.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/nouveau: Forbid runtime pm on driver unload
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(),
making this the default state when nouveau is loaded. nouveau_drm_load()
therefore calls pm_runtime_allow(), but there's no pm_runtime_forbid()
in nouveau_drm_unload() to balance it. Add it so that we leave the
device in the same state that we found it.
This isn't a bug, it's just good housekeeping. When nouveau is first
loaded with runpm=1, then unloaded and loaded again with runpm=0,
pm_runtime_forbid() will be called from nouveau_pmops_runtime_idle() or
nouveau_pmops_runtime_suspend(), so the behaviour is correct. The nvidia
blob doesn't use runtime pm, but if it ever does, this commit avoids
that it has to clean up behind nouveau.
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <karolherbst@gmail.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/92cf96445088217a4d7d7081b90140f2d6f047da.1465392124.git.lukas@wunner.de
Lukas Wunner [Wed, 8 Jun 2016 16:47:27 +0000 (18:47 +0200)]
drm/nouveau: Don't leak runtime pm ref on driver unload
nouveau_drm_load() calls pm_runtime_put() if nouveau_runtime_pm != 0,
but nouveau_drm_unload() calls pm_runtime_get_sync() unconditionally.
We therefore leak a runtime pm ref whenever nouveau is loaded with
runpm=0 and then unloaded. The GPU will subsequently never runtime
suspend even if nouveau is loaded again with runpm=1.
Fix by taking the runtime pm ref under the same condition that it was
released on driver load.
Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reported-by: Karol Herbst <karolherbst@gmail.com>
Tested-by: Karol Herbst <karolherbst@gmail.com>
Tested-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1544b82007037601fbc510b1a50edc56c529e75f.1465392124.git.lukas@wunner.de
Dave Airlie [Fri, 24 Jun 2016 03:16:07 +0000 (13:16 +1000)]
Merge tag 'mediatek-drm-2016-06-20' of git://git.pengutronix.de/git/pza/linux into drm-next
MT8173 HDMI support
- device tree binding documentation for MT8173 HDMI encoder, CEC, DDC,
and PHY
- drivers for MT8173 HDMI encoder, CEC (HPD only for now), DDC, and PHY
- enable HDMI output via a custom SMCCC call
- add ddc-i2c-bus property to HDMI connector device tree binding
* tag 'mediatek-drm-2016-06-20' of git://git.pengutronix.de/git/pza/linux:
dt-bindings: hdmi-connector: add DDC I2C bus phandle documentation
drm/mediatek: enable hdmi output control bit
drm/mediatek: Add HDMI support
dt-bindings: drm/mediatek: Add Mediatek HDMI dts binding
Dave Airlie [Fri, 24 Jun 2016 03:15:10 +0000 (13:15 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-next
some rcar-du fixes.
* 'drm/next/du' of git://linuxtv.org/pinchartl/media:
drm: rcar-du: error message is not needed for EPROBE_DEFER
drm: rcar-du: error message is not needed for drm_vblank_init()
rcar-du: add/rename DEFR6 TCON bits
Dave Airlie [Fri, 24 Jun 2016 03:13:41 +0000 (13:13 +1000)]
Merge tag 'drm-intel-next-2016-06-20' of git://anongit.freedesktop.org/drm-intel into drm-next
- Infrastructure for GVT-g (paravirtualized gpu on gen8+), from Zhi Wang
- another attemp at nonblocking atomic plane updates
- bugfixes and refactoring for GuC doorbell code (Dave Gordon)
- GuC command submission enabled by default, if fw available (Dave Gordon)
- more bxt w/a (Arun Siluvery)
- bxt phy improvements (Imre Deak)
- prep work for stolen objects support (Ankitprasa Sharma & Chris Wilson)
- skl/bkl w/a update from Mika Kuoppala
- bunch of small improvements and fixes all over, as usual
* tag 'drm-intel-next-2016-06-20' of git://anongit.freedesktop.org/drm-intel: (81 commits)
drm/i915: Update DRIVER_DATE to
20160620
drm/i915: Introduce GVT context creation API
drm/i915: Support LRC context single submission
drm/i915: Introduce execlist context status change notification
drm/i915: Make addressing mode bits in context descriptor configurable
drm/i915: Make ring buffer size of a LRC context configurable
drm/i915: gvt: Introduce the basic architecture of GVT-g
drm/i915: Fold vGPU active check into inner functions
drm/i915: Use offsetof() to calculate the offset of members in PVINFO page
drm/i915: Factor out i915_pvinfo.h
drm/i915: Serialise presentation with imported dmabufs
drm/i915: Use atomic commits for legacy page_flips
drm/i915: Move fb_bits updating later in atomic_commit
drm/i915: nonblocking commit
Reapply "drm/i915: Pass atomic states to fbc update, functions."
drm/i915: Roll out the helper nonblock tracking
drm/i915: Signal drm events for atomic
drm/i915/ilk: Don't disable SSC source if it's in use
drm/i915/guc: (re)initialise doorbell h/w when enabling GuC submission
drm/i915/guc: replace assign_doorbell() with select_doorbell_register()
...
Dave Airlie [Fri, 24 Jun 2016 01:01:17 +0000 (11:01 +1000)]
Merge tag 'topic/drm-misc-2016-06-22-updated' of git://anongit.freedesktop.org/drm-intel into drm-next
Again a pile of things all over
- Conversion to rst from docbook from Jani. Looks real pretty, and the
source is now actually readable (compared to horrible, horrible docbook
xml)! https://01.org/linuxgraphics/gfx-docs/drm/
- device register/unregister rework from Chris, with follow-up work from
Benjamin. Allows more drivers to demidlayer load/unload and others to
remove a bit of boilerplate.
- master/auth related cleanup, with docs
- some dma-buf polish, merged by Sumit
- small stuff all over (like build fixes from Arnd)
Group maintainership seems to slowly take off, with both Thierry and Sumit
pushing a few things. No hiccups thus far.
* tag 'topic/drm-misc-2016-06-22-updated' of git://anongit.freedesktop.org/drm-intel: (68 commits)
drm/vc4: Remove unused connector
drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference
drm/sun4i: Remove open-coded drm_connector_register_all()
drm/vc4: Remove open-coded drm_connector_register_all()
drm/atmel-hlcdc: Remove redundant call to drm_connector_unregister_all()
drm: document drm_auth.c
drm: Clear up master tracking booleans
drm: Extract drm_is_current_master
drm: Refactor drop/set master code a bit
drm: Lobotomize set_busid nonsense for !pci drivers
drm: Nuke SET_UNIQUE ioctl
drm: Don't call drm_dev_set_unique from platform drivers
drm/vgem: Stop calling drm_drv_set_unique
drm: Use dev->name as fallback for dev->unique
drm: Clean up drm_crtc.h
drm: Move master pointer from drm_minor to drm_device
drm: sti: rework init sequence
drm: sti: use late_register and early_unregister callbacks
drm/amdkfd: Clean up inline handling
drm: Add callbacks for late registering
...
Dave Airlie [Fri, 24 Jun 2016 00:36:47 +0000 (10:36 +1000)]
Merge tag 'drm-sii902x' of github.com:bbrezillon/linux-at91 into drm-next
Add basic support for the sii902x RGB -> HDMI bridge.
* tag 'drm-sii902x' of github.com:bbrezillon/linux-at91:
drm/bridge: Add sii902x DT bindings doc
drm/bridge: Add sii902x driver
Daniel Vetter [Wed, 22 Jun 2016 09:31:22 +0000 (11:31 +0200)]
drm/vc4: Remove unused connector
Somehow I didn't spot this when pushing :(
Fixes: 398e97994f6d ("drm/vc4: Remove open-coded drm_connector_register_all()")
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Chris Wilson [Wed, 22 Jun 2016 07:46:12 +0000 (08:46 +0100)]
drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference
We are only documenting that the read is outside of the lock, and do not
require strict ordering on the operation. In this case the more relaxed
lockless_dereference() will suffice.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466581572-16608-1-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Tue, 21 Jun 2016 09:28:03 +0000 (10:28 +0100)]
drm/sun4i: Remove open-coded drm_connector_register_all()
drm_dev_register() will now register all known connectors, so we no
longer have to do so manually.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466501283-19976-4-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Tue, 21 Jun 2016 09:28:02 +0000 (10:28 +0100)]
drm/vc4: Remove open-coded drm_connector_register_all()
drm_dev_register() will now register all known connectors, so we no
longer have to do so manually.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466501283-19976-3-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Tue, 21 Jun 2016 09:28:01 +0000 (10:28 +0100)]
drm/atmel-hlcdc: Remove redundant call to drm_connector_unregister_all()
drm_connector_unregister_all() is not automatically called by
drm_dev_unregister() so we can drop the local call.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466501283-19976-2-git-send-email-chris@chris-wilson.co.uk
Daniel Vetter [Tue, 21 Jun 2016 08:54:22 +0000 (10:54 +0200)]
drm: document drm_auth.c
Also extract drm_auth.h for nicer grouping.
v2: Nuke the other comments since they don't really explain a lot, and
within the drm core we generally only document functions exported to
drivers: The main audience for these docs are driver writers.
v3: Limit the exposure of drm_master internals by only including
drm_auth.h where it is neede (Chris).
v4: Spelling polish (Emil).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 21 Jun 2016 08:54:21 +0000 (10:54 +0200)]
drm: Clear up master tracking booleans
- is_master can be removed, we can compute this by checking allowed_master
(which really just tracks whether a master struct has been allocated
for this fpriv in either open or set_master), and whether the fpriv is
the current master on the device.
- that frees up is_master as a good replacement name for allowed_master.
With that it's clear that it tracks whether the fpriv is a master (with
possibly clients attached to it and authenticated against it), and that
one of those fprivs with is_master set is the current master.
v2: Fix kerneldoc for is_master (Emil).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-10-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 08:54:20 +0000 (10:54 +0200)]
drm: Extract drm_is_current_master
Just rolling out a bit of abstraction to be able to clean
up the master logic in the next step.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 21 Jun 2016 12:20:38 +0000 (14:20 +0200)]
drm: Refactor drop/set master code a bit
File open/set_maseter ioctl and file close/drop_master ioctl share the
same master handling code. Extract it.
Note that vmwgfx's master_set callback needs to know whether the
master is a new one or has been used already, so thread this through.
On the close/drop side a similar parameter existed, but wasnt used.
Drop it to simplify the flow.
v2: Try to make it not leak so much (Emil).
v3: Send out the right version ...
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466511638-9885-1-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 12:08:33 +0000 (14:08 +0200)]
drm: Lobotomize set_busid nonsense for !pci drivers
We already have a fallback in place to fill out the unique from
dev->unique, which is set to something reasonable in drm_dev_alloc.
Which means we only need to have a special set_busid for pci devices,
to be able to care the backwards compat code for drm 1.1 around, which
libdrm still needs.
While developing and testing this patch things blew up in really
interesting ways, and the code is rather confusing in naming things
between the kernel code, ioctl #defines and libdrm. For the next brave
dragon slayer, document all this madness properly in the userspace
interface section of gpu.tmpl.
v2: Make drm_dev_set_unique static and update kerneldoc.
v3: Entire rewrite, plus document what's going on for posterity in the
gpu docbook uapi section.
v4: Drop accidental amdgpu hunk (Emil).
v5: Drop accidental omapdrm vblank counter change (Emil).
v6: Rebase on top of the sphinx conversion.
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Tue, 21 Jun 2016 08:54:17 +0000 (10:54 +0200)]
drm: Nuke SET_UNIQUE ioctl
Ever since
commit
2e1868b560315a8b20d688e646c489a5ad93eeae
Author: Eric Anholt <anholt@freebsd.org>
Date: Wed Jun 16 09:25:21 2004 +0000
DRI trunk-
20040613 import
the X server supports drm 1.1, thus doesn't call call libdrm's
drmSetBusid - the sole user of this ioctl. When reviewing this note
that for hilarity both the kernel-internal functions (set_busid) and
the libdrm wrapper (drmSetBusid) have names not matching this ioctl
(SET_UNIQUE).
v2: Polish commit message (Emil).
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-6-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 08:54:16 +0000 (10:54 +0200)]
drm: Don't call drm_dev_set_unique from platform drivers
Since
commit
e112e593b215c394c0303dbf0534db0928e87967
Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Date: Fri Dec 11 11:20:28 2015 +0100
drm: use dev_name as default unique name in drm_dev_alloc()
we're using a reasonable default which should work for everyone. Only
mtk, rcar-du and sun4i are affected, and as kms-only drivers without
any rendering support no one should ever care about the unique name
v2: Rebase on top of mediatek.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-5-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 08:54:15 +0000 (10:54 +0200)]
drm/vgem: Stop calling drm_drv_set_unique
With the previous patch this is now redudant, the core always
sets a reasonable dev->unique string.
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-4-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 08:54:14 +0000 (10:54 +0200)]
drm: Use dev->name as fallback for dev->unique
Lots of arm drivers get this wrong and for most arm boards this is the
right thing actually. And anyway with most loaders you want to chase
sysfs links anyway to figure out which dri device you want.
This will fix dmesg noise for rockchip and sti.
Also add a fallback to driver->name for entirely virtual drivers like
vgem.
v2: Rebase on top of
commit
e112e593b215c394c0303dbf0534db0928e87967
Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Date: Fri Dec 11 11:20:28 2015 +0100
drm: use dev_name as default unique name in drm_dev_alloc()
and simplify a bit. Plus add a comment.
v3: WARN_ON(!dev->unique) as discussed with Emil.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-3-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 08:54:13 +0000 (10:54 +0200)]
drm: Clean up drm_crtc.h
- Group declarations for separate files (drm_bridge.c, drm_edid.c)
- Move declarations only used within drm.ko to drm_crtc_internal.h
- drm_property_type_valid to drm_crtc.c, its only callsite
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-2-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 21 Jun 2016 08:54:12 +0000 (10:54 +0200)]
drm: Move master pointer from drm_minor to drm_device
There can only be one current master, and it's for the overall device.
Render/control minors don't support master-based auth at all.
This simplifies the master logic a lot, at least in my eyes: All these
additional pointer chases are just confusing.
While doing the conversion I spotted some locking fail:
- drm_lock/drm_auth check dev->master without holding the
master_mutex. This is fallout from
commit
c996fd0b956450563454e7ccc97a82ca31f9d043
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Feb 25 19:57:44 2014 +0100
drm: Protect the master management with a drm_device::master_mutex v3
but I honestly don't care one bit about those old legacy drivers
using this.
- debugfs name info should just grab master_mutex.
- And the fbdev helper looked at it to figure out whether someone is
using KMS. We just need a consistent value, so READ_ONCE. Aside: We
should probably check if anyone has opened a control node too, but I
guess current userspace doesn't really do that yet.
v2: Balance locking, reported by Julia.
v3: Rebase on top of Chris' oops fixes.
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-1-git-send-email-daniel.vetter@ffwll.ch
Benjamin Gaignard [Tue, 21 Jun 2016 13:09:40 +0000 (15:09 +0200)]
drm: sti: rework init sequence
Use drm_dev_alloc() and drm_dev_register() instead of .load()
To simplify init sequence only create fbdev when requested
in output_poll_changed().
version 2:
remove call to drm_connector_unregister_all() and
drm_dev_set_unique()
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466514580-15194-4-git-send-email-benjamin.gaignard@linaro.org
Benjamin Gaignard [Tue, 21 Jun 2016 13:09:39 +0000 (15:09 +0200)]
drm: sti: use late_register and early_unregister callbacks
Make sti driver use register callback to move debugfs
initialization out of sub-components creation.
This will allow to convert driver .load() to
drm_dev_alloc() and drm_dev_register().
sti_compositor bring up 2 crtc but only one debugfs init is
needed so use drm_crtc_index to do it on the first one.
This can't be done in sti_drv because only sti_compositor have
access to the devices.
It is almost the same for sti_encoder which handle multiple
encoder while one only debugfs entry is needed so add a boolean
to avoid multiple debugfs initialization
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466514580-15194-3-git-send-email-benjamin.gaignard@linaro.org
Daniel Vetter [Tue, 21 Jun 2016 09:10:26 +0000 (11:10 +0200)]
drm/amdkfd: Clean up inline handling
- inline functions need to be static inline, otherwise gcc can opt to
not inline and the linker gets unhappy.
- no forward decls for inline functions, just include the right headers.
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Ben Goz <ben.goz@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466500235-21282-2-git-send-email-daniel.vetter@ffwll.ch
Benjamin Gaignard [Tue, 21 Jun 2016 14:37:09 +0000 (16:37 +0200)]
drm: Add callbacks for late registering
Like what has been done for connectors add callbacks on encoder,
crtc and plane to let driver do actions after drm device registration.
Correspondingly, add callbacks called before unregister drm device.
version 2:
add drm_modeset_register_all() and drm_modeset_unregister_all()
to centralize all calls
version 3:
in error case unwind registers in drm_modeset_register_all
fix uninitialed return value
inverse order of unregistration in drm_modeset_unregister_all
version 4:
move function definitions in drm_crtc_internal.h
remove not needed documentation
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466519829-4000-1-git-send-email-benjamin.gaignard@linaro.org
Stefan Agner [Sun, 19 Jun 2016 02:15:43 +0000 (19:15 -0700)]
drm/fsl-dcu: use drm_mode_config_cleanup on initialization errors
Commit
7566e247672d ("drm/fsl-dcu: handle initialization errors properly")
introduced error handling during initialization, but with a wrong cleanup
order.
Replace the error handling with the generic cleanup function
drm_mode_config_cleanup.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160619021543.23587-1-stefan@agner.ch
Arnd Bergmann [Wed, 11 May 2016 20:11:07 +0000 (22:11 +0200)]
drm/mediatek: Remove IOMMU_DMA select
We get a harmless build warning when trying to use the mediatek DRM
driver with IOMMU support disabled:
warning: (DRM_MEDIATEK) selects IOMMU_DMA which has unmet direct dependencies (IOMMU_SUPPORT)
However, the IOMMU_DMA symbol is not meant to be used by drivers at all,
and this driver doesn't seem to have a strict dependency on it other
than using the mediatek IOMMU driver that does.
Since we also want to be able to do compile tests with the driver on
other platforms, the IOMMU_DMA symbol should not be selected here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1462997501-982363-1-git-send-email-arnd@arndb.de
Jani Nikula [Tue, 21 Jun 2016 11:49:03 +0000 (14:49 +0300)]
Documentation/DocBook: remove gpu.tmpl
The gpu documentation has now been converted to reStructuredText files
under Documentation/gpu. Remove the obsolete DocBook template. Also
remove it from MAINTAINERS.
Good riddance.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8d673f75fe686371ed9838682c368a4e3b96bf54.1466506505.git.jani.nikula@intel.com
Jani Nikula [Tue, 21 Jun 2016 11:49:02 +0000 (14:49 +0300)]
Documentation/gpu: split up mm, kms and kms-helpers from internals
Make the documents more manageable.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/be992e56eb8442d6e03b52444df5a42525085718.1466506505.git.jani.nikula@intel.com
Jani Nikula [Tue, 21 Jun 2016 11:49:01 +0000 (14:49 +0300)]
Documentation/gpu: convert the KMS properties table to CSV
Pandoc really did a bad job of converting the big KMS properties table
to RST. Instead, put the properties into a separate plain text CSV file,
and include it in the RST file. The generated output isn't very pretty,
but at least the information is there, and it's stored in a format
that's easier to process and improve upon at a later time.
The CSV file was generated by copy-pasting the table from the HTML
generated by the DocBook toolchain into LibreOffice Calc, and then saved
as CSV, unmodified.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/17053ff08caf5cfac4f478437ef796f83a31d772.1466506505.git.jani.nikula@intel.com
Jani Nikula [Tue, 21 Jun 2016 11:49:00 +0000 (14:49 +0300)]
Documentation/gpu: use recommended order of heading markers
While splitting the document up, the headings "shifted" from what pandoc
generated. Use the following order for headings for consistency:
==============
Document title
==============
First
=====
Second
------
Third
~~~~~
Leave the lower level headings as they are; I think those are less
important. Although RST doesn't mandate a specific order ("Rather than
imposing a fixed number and order of section title adornment styles, the
order enforced will be the order as encountered."), having the higher
levels the same overall makes it easier to follow the documents.
[I'm sort of kind of writing the recommendation for docs-next in the
mean time, but this order seems sensible, and is what I'm proposing.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/126f42734defac6cbb8496a481d58db7b38461dd.1466506505.git.jani.nikula@intel.com
Jani Nikula [Tue, 21 Jun 2016 11:48:59 +0000 (14:48 +0300)]
MAINTAINERS: add Documentation/gpu and Documentation/gpu/i915.rst
We'll want to keep an eye on what's going on in these files.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/4d409e09c475cc0bdf7a0312e30c0d3f8d535fc5.1466506505.git.jani.nikula@intel.com
Jani Nikula [Tue, 21 Jun 2016 11:48:58 +0000 (14:48 +0300)]
Documentation/gpu: split up the gpu documentation
Make the gpu documentation easier to manage by splitting to separate
files. Again, this is just the split, no real edits.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bd2b599b5105c28c8f05923005e6cc9b7efa7fc1.1466506505.git.jani.nikula@intel.com
Jani Nikula [Tue, 21 Jun 2016 11:48:57 +0000 (14:48 +0300)]
Documentation/gpu: add new gpu.rst converted from DocBook gpu.tmpl
This is the first step towards converting the DocBook gpu.tmpl to Sphinx
and reStructuredText, the new kernel documentation tool and markup.
Use Jon's "cheesy conversion script" in Documentation/sphinx/tmplcvt to
do the rough conversion. Do the manual edits in follow-up patches. Add a
new Documentation/gpu directories for the graphics related
documentation. (Hooray, now we can have directories based on topics
rather than tools under Documentation.)
We also won't remove the DocBook gpu.tmpl yet so it's easier to build
both and compare the results for parity.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/bc7b4f9ac037632e0c8469c079d21fad5eaa39a0.1466506505.git.jani.nikula@intel.com
Daniel Vetter [Wed, 8 Jun 2016 12:19:18 +0000 (14:19 +0200)]
drm/crtc-helper: disable_unused_functions really isn't for atomic
Rockchip just blew up here on testing, because I removed some "is this
crtc already disabled/enabled" state tracking from callbacks (not needed
with atomic). Turns out that was needed to work around rockchip still
calling legacy helper code.
Since me explaining on irc/mailing-list plus kerneldoc isn't enough,
be more verbose and add dmesg output. Not that anyone actually reads that,
either.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-26-git-send-email-daniel.vetter@ffwll.ch
Chris Wilson [Fri, 17 Jun 2016 08:25:23 +0000 (09:25 +0100)]
drm/rcar-du: Remove redundant calls to drm_connector_register_all()
Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-8-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Jun 2016 08:25:22 +0000 (09:25 +0100)]
drm/msm: Remove redundant calls to drm_connector_register_all()
Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-7-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Jun 2016 08:25:21 +0000 (09:25 +0100)]
drm/mediatek: Remove redundant calls to drm_connector_register_all()
Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-6-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Jun 2016 08:25:20 +0000 (09:25 +0100)]
drm/hisilicon: Remove redundant calls to drm_connector_register_all()
Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-5-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Jun 2016 08:25:19 +0000 (09:25 +0100)]
drm/atmel-hlcdc: Remove redundant calls to drm_connector_register_all()
Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-4-git-send-email-chris@chris-wilson.co.uk
Chris Wilson [Fri, 17 Jun 2016 08:25:18 +0000 (09:25 +0100)]
drm/arc: Remove redundant calls to drm_connector_register_all()
Up to now, the recommendation was for drivers to call drm_dev_register()
followed by drm_connector_register_all(). Now that
drm_connector_register() is safe against multiple invocations, we can
move drm_connector_register_all() to drm_dev_register() and not suffer
from any backwards compatibility issues with drivers not following the
more rigorous init ordering.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466151923-1572-3-git-send-email-chris@chris-wilson.co.uk
Tomasz Figa [Tue, 21 Jun 2016 04:27:34 +0000 (13:27 +0900)]
drm/rockchip: Finish initialization before registering DRM device
Currently the driver calls drm_dev_register() directly after allocating
the DRM device and then continues with further initialization. This is
incorrect, because drm_dev_register() is supposed to be called after all
initialization is done. This problem was masked by the fact that
drm_dev_register() did not use to do anything special before, but
recently it started to call drm_connector_register_all(), which leads to
a crash if the driver is not fully initialized.
This patch fixes the problem by moving the call to drm_dev_register() to
the end of the initialization sequence and also removing the, now
unnecessary, call to drm_connector_register_all() from driver code.
Fixes: f706974a69b6 ("drm/rockchip: Drop drm_driver.load/unload callbacks")
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
[danvet: Fix up cleanup labels a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466483254-35373-1-git-send-email-tfiga@chromium.org
Daniel Vetter [Thu, 9 Jun 2016 22:14:39 +0000 (00:14 +0200)]
drm/omapdrm: don't call drm_helper_disable_unused_functions
It's a legacy helper function which won't do good with atomic helpers.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465510479-21180-1-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 17 Jun 2016 07:33:23 +0000 (09:33 +0200)]
drm: Mark set/drop master ioctl as unlocked.
Again this is neatly protected by the dev->master_mutex now. There is
a driver callback both for set and drop, but it's only used by vmwgfx.
And vmwgfx has it's own solid locking for shared resources (besides
dev->master_mutex), hence is all safe. Let's drop another place where
the drm legacy bkl is used.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-6-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 17 Jun 2016 07:33:22 +0000 (09:33 +0200)]
drm: Mark authmagic ioctls as unlocked
All protected by dev->master_mutex. And there's no driver callbacks,
which means no need to sync with old dri1 horror show drivers at all.
Hence safe to drop the drm legacy BKL from these paths.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-5-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 17 Jun 2016 07:33:21 +0000 (09:33 +0200)]
drm: Protect authmagic with master_mutex
Simplifies cleanup, and there's no reason drivers should ever care
about authmagic at all - it's all handled in the core.
And with that, Ladies and Gentlemen, it's time to pop the champagen
and celebrate: dev->struct_mutex is now officially gone from modern
drivers, and if a driver is using gem_free_object_unlocked and doesn't
do anything else silly it's positively impossible to ever touch
dev->struct_mutex at runtime, anywhere.
Well except for the mutex_init on driver load ;-)
v2: Rebased.
Cc: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-4-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 17 Jun 2016 07:33:20 +0000 (09:33 +0200)]
drm: Move authmagic cleanup into drm_master_release
It's related, and soon authmagic will also use the master_mutex.
There is an ever-so-slightly semantic change here:
- authmagic will only be cleaned up for primary_client drm_minors. But
it's impossible to create authmagic on render/control nodes, so this
is fine.
- The cleanup is moved down a bit in the release processing. Doesn't
matter at all since authmagic is purely internal logic used by the
core ioctl access checks, and when we're in a file's release
callback no one can do ioctls any more.
v2: Rebased.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-3-git-send-email-daniel.vetter@ffwll.ch
Daniel Vetter [Fri, 17 Jun 2016 07:33:19 +0000 (09:33 +0200)]
drm: Only do the hw.lock cleanup in master_relase for !MODESET
Another place gone where modern drivers could have hit
dev->struct_mutex.
To avoid too deeply nesting control flow rework it a bit.
v2: Review from Chris:
- remove spurious newline.
- fix file_priv->master like for the !file_priv->is_master case.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466148814-8194-2-git-send-email-daniel.vetter@ffwll.ch
Kuninori Morimoto [Wed, 25 May 2016 00:41:18 +0000 (00:41 +0000)]
drm: rcar-du: error message is not needed for EPROBE_DEFER
EPROBE_DEFER is not error, thus, error message on kernel log on this
case is confusable. Print it only error cases
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Kuninori Morimoto [Wed, 25 May 2016 00:40:26 +0000 (00:40 +0000)]
drm: rcar-du: error message is not needed for drm_vblank_init()
The only reason drm_vblank_init() could return an error at the
moment is a kcalloc() failure.
So we can remove current error message completely.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Sergei Shtylyov [Fri, 22 Apr 2016 22:56:07 +0000 (01:56 +0300)]
rcar-du: add/rename DEFR6 TCON bits
The TCNE2 bit of the DEFR6 register was renamed to TCNE1 in the R-Car gen2
manuals -- which makes more sense as that bit controls whether DU1, not DU2
is connected to TCON.
While at it, add the TCNE0 bit which controls whether DU0 is connected to
TCON.
Based on the large patch by Andrey Gusakov <andrey.gusakov@cogentembedded.com>.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
projects / openwrt / staging / blogic.git / log