Hauke Mehrtens [Thu, 28 Mar 2013 19:18:23 +0000 (20:18 +0100)]
compat: add module_pcmcia_driver
This is a backport of:
commit
6ed7ffddcf61f668114edb676417e5fb33773b59
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Wed Mar 6 11:24:44 2013 -0700
pcmcia/ds.h: introduce helper for pcmcia_driver module boilerplate
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 28 Mar 2013 09:53:23 +0000 (02:53 -0700)]
compat: backport fb_info->skip_vt_switch using a static inline
Commit
3cf2667 as of next-
20130301 extended the struct fb_info
with a skip_vt_switch to allow drivers to skip the VT switch
at suspend/resume time. For older kernels we can skip this
as all this switch does is call pm_vt_switch_required() with true
or false depending on this new flag and later
pm_vt_switch_unregister() would not have been made.
compat-drivers was backporting this using #ifdef's but by
integrating a static inline we'd reduce the number of lines
to backport to just 1 line replacement. This would be something
like:
- info->skip_vt_switch = true;
+ fb_enable_skip_vt_switch(info);
For kernels >= 3.10 we'd set the attribute as we do upstream,
for older kernels this would be a no-op.
If this static inline would have been added upstream it would
have meant this collateral evolution would require just adding
a no-op static inline to backport, and no changes as the above
example hunk for every driver that requires the change.
If this static inline ends up upstream *now* it means we do *not*
require the type of hunk above for every driver that requires
the change.
All the code would be left intact !
This is a linux-next 'data structure element collateral evolution'.
Cc: cocci@systeme.lip6.fr
Cc: backports@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 28 Mar 2013 08:42:42 +0000 (01:42 -0700)]
compat: backport sg_page_iter_page() and sg_page_iter_dma_address()
This should be going into the next kernel release, assuming
this will be called 3.10 we stuff into the 3.10 header.
Although this commit does modify the struct sg_page_iter
data structure that was just done to remove something no
longer needed due to the change. This should not impact
older kernels so just keep the original implementation.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
2db76d7c
next-
20130328~64^2~6
commit
2db76d7c3c6db93058f983c8240f7c7c25e87ee6
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Mar 26 15:14:18 2013 +0200
lib/scatterlist: sg_page_iter: support sg lists w/o backing pages
The i915 driver uses sg lists for memory without backing 'struct page'
pages, similarly to other IO memory regions, setting only the DMA
address for these. It does this, so that it can program the HW MMU
tables in a uniform way both for sg lists with and without backing pages.
Without a valid page pointer we can't call nth_page to get the current
page in __sg_page_iter_next, so add a helper that relevant users can
call separately. Also add a helper to get the DMA address of the current
page (idea from Daniel).
Convert all places in i915, to use the new API.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 28 Mar 2013 02:16:56 +0000 (19:16 -0700)]
compat: backport ktime_get_monotonic_offset()
The commit
a80b83b7 exported ktime_get_monotonic_offset()
but note that this was already in place on the header
files declared as extern, it was just never exported.
To work around the double possible declaration issue
with older kernels fortunately the LINUX_BACKPORT()
macro comes to the rescue by encofring our version
to be declared and used in backport code. Note that
this was added due to commit
c61eef72 added as of
v3.8 for DRM drivers that need access to timestamps that
do no do not jump, unfortunately for older kernels we
can't port that since it requires access to a static
variable on the kernel, so just use the timestamps that
jump.
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
a80b83b7
v3.5-rc6~10^2~15^2~30
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
c61eef72
v3.8-rc1~42^2~170
commit
a80b83b7b8456e9b475346c2e01d7e210883208c
Author: John Stultz <john.stultz@linaro.org>
Date: Fri Feb 3 00:19:07 2012 -0800
Input: add infrastructure for selecting clockid for event time stamps
As noted by Arve and others, since wall time can jump backwards, it is
difficult to use for input because one cannot determine if one event
occurred before another or for how long a key was pressed.
However, the timestamp field is part of the kernel ABI, and cannot be
changed without possibly breaking existing users.
This patch adds a new IOCTL that allows a clockid to be set in the
evdev_client struct that will specify which time base to use for event
timestamps (ie: CLOCK_MONOTONIC instead of CLOCK_REALTIME).
For now we only support CLOCK_MONOTONIC and CLOCK_REALTIME, but
in the future we could support other clockids if appropriate.
The default remains CLOCK_REALTIME, so we don't change the ABI.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
commit
c61eef726a78ae77b6ce223d01ea2130f465fe5c
Author: Imre Deak <imre.deak@intel.com>
Date: Tue Oct 23 18:53:26 2012 +0000
drm: add support for monotonic vblank timestamps
Jumps in the vblank and page flip event timestamps cause trouble for
clients, so we should avoid them. The timestamp we get currently with
gettimeofday can jump, so use instead monotonic timestamps.
For backward compatibility use a module flag to revert back to using
gettimeofday timestamps. Add also a DRM_CAP_TIMESTAMP_MONOTONIC flag
that is simply a read only version of the module flag, so that clients
can query this without depending on sysfs.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 28 Mar 2013 02:23:27 +0000 (19:23 -0700)]
compat: declare eth_hw_addr_random() under LINUX_BACKPORT()
Debian kernels cherry picked the commit that added this,
so LINUX_BACKPORT() comes to the rescue.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 28 Mar 2013 02:20:32 +0000 (19:20 -0700)]
compat: declare kmalloc_array() through LINUX_BACKPORT()
This fixes compilation with Debian 3.2 kernels that
cherry picked the commit that added that call (
a8203725).
commit
a8203725dfded5c1f79dca3368a4a273e24b59bb
Author: Xi Wang <xi.wang@gmail.com>
Date: Mon Mar 5 15:14:41 2012 -0800
slab: introduce kmalloc_array()
Introduce a kmalloc_array() wrapper that performs integer overflow
checking without zeroing the memory.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Tue, 26 Mar 2013 22:12:58 +0000 (15:12 -0700)]
compat: fix cordic backport header
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains \
10f8113ecb76eea72f96c7cfb72d7fed7c282565
v3.1-rc1~24^2~10^2^2~515
The cordic backport added the cordic library
and the cordic header. It correctly only compiled
cordic for kernels < 3.1 but the header however was
left intact. This is non-issue until cordic itself
gets updated with some new features or changes but
also an issue was created when we switched the
backort namespace. The issue is that the header
declares backport_cordic_calc_iq() exists while
it actually is not compiled on newer kernels.
Fix this by doing the kernel revision check on the
backported header, otherwise use #include_next to
get the next header, the proper kernel header.
This does not have to be added to the older releases
given that the header is the same for older kernels,
and we are not exporting the symbol twice given that
the proper check was already in place for cordic.c.
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
real 0m32.956s
user 12m14.398s
sys 2m12.304s
Reported-by: Camaleón <noelamac@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 22 Mar 2013 19:33:38 +0000 (19:33 +0000)]
compat: backport lib/scatterlist.c from
0db9299f
Backport the lib/scatterlist.c addition, this required
just removing the kmemleak stuff as that is not available
on older kernels.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
0db9299f
v2.6.25-rc1~1173^2~2
commit
0db9299f48ebd4a860d6ad4e1d36ac50671d48e7
Author: Jens Axboe <jens.axboe@oracle.com>
Date: Fri Nov 30 09:16:50 2007 +0100
SG: Move functions to lib/scatterlist.c and add sg chaining allocator helpers
Manually doing chained sg lists is not trivial, so add some helpers
to make sure that drivers get it right.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 21 Mar 2013 23:29:23 +0000 (23:29 +0000)]
compat: backport sg_alloc_table_from_pages() from
efc42bc9
This backports sg_alloc_table_from_pages() added via commit
efc42bc9
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
efc42bc9
v3.6-rc1~57^2~11
commit
efc42bc98058a36d761b16a114823db1a902ed05
Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Mon Jun 18 09:25:01 2012 +0200
scatterlist: add sg_alloc_table_from_pages function
This patch adds a new constructor for an sg table. The table is constructed
from an array of struct pages. All contiguous chunks of the pages are merged
into a single sg nodes. A user may provide an offset and a size of a buffer if
the buffer is not page-aligned.
The function is dedicated for DMABUF exporters which often perform conversion
from an page array to a scatterlist. Moreover the scatterlist should be
squashed in order to save memory and to speed-up the process of DMA mapping
using dma_map_sg.
The code is based on the patch 'v4l: vb2-dma-contig: add support for
scatterlist in userptr mode' and hints from Laurent Pinchart.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 21 Mar 2013 23:17:59 +0000 (23:17 +0000)]
compat: fix backport_ prefix change on compat module
The commit
a05e783c addressed the main compat module
routine name changes but failed to fix two calls. Fix
this.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 21 Mar 2013 21:16:42 +0000 (21:16 +0000)]
compat: backport sg page iterator
a321e91b
This backports commit
a321e91b which adds the
scatterlist simple page iterator.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
a321e91b
v3.9-rc1~46^2~149
commit
a321e91b6d73ed011ffceed384c40d2785cf723b
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Feb 27 17:02:56 2013 -0800
lib/scatterlist: add simple page iterator
Add an iterator to walk through a scatter list a page at a time starting
at a specific page offset. As opposed to the mapping iterator this is
meant to be small, performing well even in simple loops like collecting
all pages on the scatterlist into an array or setting up an iommu table
based on the pages' DMA address.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: use backport_ prefix for main compat module calls
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for uidgid
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for pm_qos_params
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for kfifo
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for crc8
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for cordic
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.8
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.7
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.4
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.3
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.2
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.1
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v3.0
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.39
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:14 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.38
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.37
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.36
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.35
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.34
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.33
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.32
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.31
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.29
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.28
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.27
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.26
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.25
There is one change needed here to get compilation
working on v2.6.24, strict_strtoull is now being
redefined and because of a change that went into
v2.6.38.4 kstrtoul() was added there and the old
strict_strtoul was made a define from it. To help
aid the older kernels such as 2.6.24 that need
the old strict_strtoul we simply check if strict_strtoull
is defined, then we know you're on >= 2.6.38.4 and
don't need kstrtoul() and friends.
If strict_strtoull ever needs to be backported for
older kernels we'll have to revisit this check.
It is worth documenting here why this change went into
v2.6.38.4 and not the orignal v2.6.38 release, so
the commit is provided.
commit
280a1c38c907ab1e2617bdcef66de6bc70897253
Author: Alexey Dobriyan <adobriyan@gmail.com>
kstrto*: converting strings to integers done (hopefully) right
commit
33ee3b2e2eb9b4b6c64dcf9ed66e2ac3124e748c upstream.
1. simple_strto*() do not contain overflow checks and crufty,
libc way to indicate failure.
2. strict_strto*() also do not have overflow checks but the name and
comments pretend they do.
3. Both families have only "long long" and "long" variants,
but users want strtou8()
4. Both "simple" and "strict" prefixes are wrong:
Simple doesn't exactly say what's so simple, strict should not exist
because conversion should be strict by default.
The solution is to use "k" prefix and add convertors for more types.
Enter
kstrtoull()
kstrtoll()
kstrtoul()
kstrtol()
kstrtouint()
kstrtoint()
kstrtou64()
kstrtos64()
kstrtou32()
kstrtos32()
kstrtou16()
kstrtos16()
kstrtou8()
kstrtos8()
Include runtime testsuite (somewhat incomplete) as well.
strict_strto*() become deprecated, stubbed to kstrto*() and
eventually will be removed altogether.
Use kstrto*() in code today!
Note: on some archs _kstrtoul() and _kstrtol() are left in tree, even if
they'll be unused at runtime. This is temporarily solution,
because I don't want to hardcode list of archs where these
functions aren't needed. Current solution with sizeof() and
__alignof__ at least always works.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tested with ckmake:
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.24
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: embrace LINUX_BACKPORT() for v2.6.23
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.65 [ OK ]
18 3.1.10 [ OK ]
19 3.2.38 [ OK ]
20 3.3.8 [ OK ]
21 3.4.32 [ OK ]
22 3.5.7 [ OK ]
23 3.6.11 [ OK ]
24 3.7.9 [ OK ]
25 3.8.0 [ OK ]
26 3.9-rc1 [ OK ]
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: add LINUX_BACKPORT() for prefixing symbols
Ben Hutchings <ben@decadent.org.uk> notes that "compat"
is already taken as a prefix for symbols and while this
is only slightly true in practice its best we avoid any
future issues.
Others in the past have noted issues with symbols exported
by backporting effort to conflict with other symbols that
might be preferred by the running kernel. In the worst
case scenerio we'd have the same subsystems with two eras
with two sets of drivers using a subystem from an era each.
This patch doesn't address that but tries to address the
namespace conflict by compat itself. The best alternative I
was hoping for was to use core module symbol namespaces but
after reviewing that effort introduced in 2007
by Andi Kleen [0] I see in the end Rusty Russell nack'd
these patches [1] so we're left with dealing with symbol
renaming.
Define LINUX_BACKPORT() to be used to allow us to rename
symbols with a backport_ prefix. The the cleanest, but
its a start.
[0] http://thread.gmane.org/gmane.linux.network/78674
[1] http://article.gmane.org/gmane.linux.kernel/606885
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 20 Mar 2013 00:57:13 +0000 (17:57 -0700)]
compat: use EXPORT_SYMBOL_GPL()
This was the intent all along, however some symbols have
slipped. The goal is always clear: if you are using any
of this code at run time this is making your code derivative
works of the Linux kernel and therefore GPLv2.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Fri, 15 Mar 2013 02:05:47 +0000 (19:05 -0700)]
compat: fix ckmake to skip same base kernels
The ckmake script was allowing testing of compilation
of kernels even if the base kernels were the same. This
fixes it to skip them, trimming down test kernel compilation
down and not caring what old kernels you keep on your
system. This also now prints the RC release correctly.
The get_rel_spec() routine is based on the rel-html
get_rel_spec() routine and rel-html is AGPL but since
I wrote it I relicense a modified version of that
routine here to GPLv2.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 14 Mar 2013 22:08:01 +0000 (15:08 -0700)]
compat: backport print_hex_dump_debug()
This backports print_hex_dump_debug() from commit
7a555613, which itself required a definition from
commit
07613b0b.
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
7a555613
v3.9-rc1~128^2~135
mcgrof@frijol ~/linux-stable (git::master)$ git describe --contains
07613b0b
v3.2-rc1~184^2~6
commit
7a555613eb77c69eb6e48b61bc5f72dd42fa1780
Author: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Wed Dec 5 16:48:27 2012 -0500
dynamic_debug: dynamic hex dump
Introduce print_hex_dump_debug() that can be dynamically controlled, similar to
pr_debug.
Also, make print_hex_dump_bytes() dynamically controlled
Implement only 'p' flag (_DPRINTK_FLAGS_PRINT) to keep it simple since hex dump prints
multiple lines and long prefix would impact readability.
To provide line/file etc. information, use pr_debug or similar
before/after print_hex_dump_debug()
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit
07613b0b5ef8570033aa806d1731dce599862223
Author: Jason Baron <jbaron@redhat.com>
Date: Tue Oct 4 14:13:15 2011 -0700
dynamic_debug: consolidate repetitive struct _ddebug descriptor definitions
Replace the repetitive struct _ddebug descriptor definitions with a new
DECLARE_DYNAMIC_DEBUG_META_DATA(name, fmt) macro.
[akpm@linux-foundation.org: s/DECLARE/DEFINE/]
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 14 Mar 2013 18:58:10 +0000 (11:58 -0700)]
compat: fix compilation on 2.6.24 based on next-
20130312
drivers/net/wireless/iwlwifi/mvm/mac80211.c ends up
including include/net/inet_hashtables.h which in 2.6.24
has a routine called __inet_lookup_established() that
uses the sk_for_each(1, 2, 3). The patch below by Hauke
backported the change that went into the kernel that
made sk_for_each(1, 3) use two arguments. It turns out
that upstream we realized that the second argument was
useless. The header however uses it though so the trick
didn't work for 2.6.24 if code used it there.
We fix it using a nasty hack by ensuring that when the
header file is included we redefine that routine to
something else, then we udef it, and then define our
new version that only uses the 2 argument form of
sk_for_each(). This is a nasty way to solve it but
not sure if there is anything cleaner.
commit
dbc390647a841061954f67ea226221fc7f4b3836
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun Feb 10 20:10:10 2013 +0100
compat: backport drop of node parameter from iterators
This patch backports the following commit in mainline linux kernel:
commit
0bbacca7c3911451cea923b0ad6389d58e3d9ce9
Author: Sasha Levin <sasha.levin@oracle.com>
Date: Thu Feb 7 12:32:18 2013 +1100
hlist: drop the node parameter from iterators
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 13 Mar 2013 09:51:15 +0000 (02:51 -0700)]
compat: backport rename of random32 to prandom
mcgrof@frijol ~/linux-next (git::master)$ git describe \
--contains
496f2f93b1cc286f5a4f4f9acdc1e5314978683f
v3.8-rc1~74^2~22
commit
496f2f93b1cc286f5a4f4f9acdc1e5314978683f
Author: Akinobu Mita <akinobu.mita@gmail.com>
Date: Mon Dec 17 16:04:23 2012 -0800
random32: rename random32 to prandom
This renames all random32 functions to have 'prandom_' prefix as follows:
void prandom_seed(u32 seed); /* rename from srandom32() */
u32 prandom_u32(void); /* rename from random32() */
void prandom_seed_state(struct rnd_state *state, u64 seed);
/* rename from prandom32_seed() */
u32 prandom_u32_state(struct rnd_state *state);
/* rename from prandom32() */
The purpose of this renaming is to prevent some kernel developers from
assuming that prandom32() and random32() might imply that only
prandom32() was the one using a pseudo-random number generator by
prandom32's "p", and the result may be a very embarassing security
exposure. This concern was expressed by Theodore Ts'o.
And furthermore, I'm going to introduce new functions for getting the
requested number of pseudo-random bytes. If I continue to use both
prandom32 and random32 prefixes for these functions, the confusion
is getting worse.
As a result of this renaming, "prandom_" is the common prefix for
pseudo-random number library.
Currently, srandom32() and random32() are preserved because it is
difficult to rename too many users at once.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: David Laight <david.laight@aculab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 7 Mar 2013 20:58:29 +0000 (12:58 -0800)]
compat: add 3.9-rc1 vanilla kernel to list of kernels to test
This adds the vanilla 3.9-rc1 kernel to the list set list of
test kernels we'll test.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 27 Feb 2013 23:54:58 +0000 (00:54 +0100)]
compat: add file_inode()
This adds a backport for file_inode().
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Tue, 19 Feb 2013 22:26:31 +0000 (23:26 +0100)]
compat: update kernel versions in bin/get-compat-kernels
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 18 Feb 2013 21:37:36 +0000 (22:37 +0100)]
compat: deactivate netdev_set_default_ethtool_ops() for some 3.7 kernels
netdev_set_default_ethtool_ops() was backported in 3.7.8 and compat
should not ship it on any more recent versions any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 19:51:00 +0000 (20:51 +0100)]
compat: backport of lock_map_acquire() and lock_map_release()
This is a backport of:
commit
3295f0ef9ff048a4619ede597ad9ec9cab725654
Author: Ingo Molnar <mingo@elte.hu>
Date: Mon Aug 11 10:30:30 2008 +0200
lockdep: rename map_[acquire|release]() => lock_map_[acquire|release]()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 19:50:02 +0000 (20:50 +0100)]
compat: backport of lock_map_acquire_read()
This is a backport of:
commit
e159489baa717dbae70f9903770a6a4990865887
Author: Tejun Heo <tj@kernel.org>
Date: Sun Jan 9 23:32:15 2011 +0100
workqueue: relax lockdep annotation on flush_work()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 19:33:51 +0000 (20:33 +0100)]
compat: add empty struct watchdog_device
This is needed in some header file but so driver accesses this struct.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 18:23:13 +0000 (19:23 +0100)]
compat: add missing platform devid constants
They are both set to none and will result in no id being added to the
device.
This is a backport of:
commit
689ae231afbac8979f96100b372a5a73458baaa9
Author: Jean Delvare <khali@linux-fr.org>
Date: Fri Jul 27 22:14:59 2012 +0200
platform: Add support for automatic device IDs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 13 Feb 2013 18:23:00 +0000 (19:23 +0100)]
compat: add PCI_EXP_LNKCAP_SLS_2_5GB and PCI_EXP_LNKCAP_SLS_5_0GB
This is a backport of:
commit
130f1b8f35f14d27c43da755f3c9226318c17f57
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Dec 26 10:39:23 2012 -0700
PCI: Add PCIe Link Capability link speed and width names
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 21:49:06 +0000 (22:49 +0100)]
compat: move tty_flip_buffer_push() and tty_insert_flip_string()
These backports are also needed for kernel 3.7 and 3.8.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 19:51:22 +0000 (20:51 +0100)]
compat: add kernel 3.8-rc7 and update others
This adds 3.8-rc7 to the get.compat-kernels fetch script and updates
some kernel versions to the last minor version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 20:50:15 +0000 (21:50 +0100)]
compat: check if efi_enabled() was already backported
efi_enabled() gets backported to older kernel versions and if this is
the case compat should not try to do the same.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 19:10:10 +0000 (20:10 +0100)]
compat: backport drop of node parameter from iterators
This patch backports the following commit in mainline linux kernel:
commit
0bbacca7c3911451cea923b0ad6389d58e3d9ce9
Author: Sasha Levin <sasha.levin@oracle.com>
Date: Thu Feb 7 12:32:18 2013 +1100
hlist: drop the node parameter from iterators
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 10 Feb 2013 18:45:10 +0000 (19:45 +0100)]
compat: backport idr_alloc() usage
This backports a patch series send by Tejun Heo:
https://lkml.org/lkml/2013/2/2/159
Hauke Mehrtens [Sun, 3 Feb 2013 17:25:07 +0000 (18:25 +0100)]
compat: netdev_set_default_ethtool_ops() is not in kernel 3.7.5
netdev_set_default_ethtool_ops() should be added to compat for every
3.7.X series kernel as it is also not in 3.7.5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 3 Feb 2013 16:20:56 +0000 (17:20 +0100)]
compat: backport BUILD_BUG_ON from recent kernel
This version of BUILD_BUG_ON does not have the following error on an
old kernel version (2.6.32 - 2.6.37):
drivers/net/wireless/iwlwifi/mvm/quota.c:145:24: error: bit-field
'<anonymous>' width not an integer constant
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 3 Feb 2013 14:08:46 +0000 (15:08 +0100)]
compat: adapt signature change of tty_flip_buffer_push() and tty_insert_flip_string()
The method signature of tty_flip_buffer_push() and
tty_insert_flip_string() was changed in these commits and this converts
it to the old behavior.
commit
2e124b4a390ca85325fae75764bef92f0547fa25
Author: Jiri Slaby <jslaby@suse.cz>
Date: Thu Jan 3 15:53:06 2013 +0100
TTY: switch tty_flip_buffer_push
commit
05c7cd39907184328f48d3e7899f9cdd653ad336
Author: Jiri Slaby <jslaby@suse.cz>
Date: Thu Jan 3 15:53:04 2013 +0100
TTY: switch tty_insert_flip_string
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 3 Feb 2013 13:01:39 +0000 (14:01 +0100)]
compat: add efi_enabled()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Johannes Berg [Thu, 24 Jan 2013 10:44:56 +0000 (11:44 +0100)]
compat: backport nla_put_be{16,32,64}()
I intend to use these in nl80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 24 Jan 2013 23:44:09 +0000 (00:44 +0100)]
compat: ckmake: do not start all build at the same time
When all builds are started at the same time this causes problems like,
because all threads want to access the same file.
In the compat-drivers build this resulted in this error for some threads:
./scripts/gen-compat-autoconf.sh: /usr/bin/env: bad interpreter: Text file busy
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 24 Jan 2013 21:15:21 +0000 (22:15 +0100)]
compat: ckmake: remove lots of warning spam for the log
Set the environment variable KCFLAGS = "-Wno-unused-but-set-variable"
to remove lots of spam from the log.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 24 Jan 2013 20:37:34 +0000 (21:37 +0100)]
compat: ckmake: make return code 2 is error
If make returns 2 it should be treat as an error and not as ok.
The documentation says 2 is returned if make encountered an error:
https://www.gnu.org/software/make/manual/html_node/Running.html
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 23 Jan 2013 23:41:41 +0000 (00:41 +0100)]
compat: update kernel versions in bin/get-compat-kernels
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 23 Jan 2013 22:54:45 +0000 (23:54 +0100)]
compat: do not access default_ethtool_ops
&default_ethtool_ops is not exported in kernel 3.7.4 and earlier and it
should be be accessed from compat.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Wed, 23 Jan 2013 21:22:44 +0000 (13:22 -0800)]
compat: fix compile errors when assembly is built into modules
On powerpc, modules can be compiled and linked with an assembly file, adding
missing symbols that the compiler references when using -Os.
== ckmake-report.log ==
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.50 [ OK ]
18 3.1.10 [ OK ]
19 3.2.33 [ OK ]
20 3.3.8 [ OK ]
21 3.4.17 [ OK ]
22 3.5.7 [ OK ]
23 3.6.5 [ OK ]
24 3.7.0 [ OK ]
real 0m33.803s
user 11m24.519s
sys 3m39.690s
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Luis R. Rodriguez [Tue, 22 Jan 2013 00:00:49 +0000 (16:00 -0800)]
compat: remove trailing erroneous semicolon from compat-3.8.c
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Mon, 21 Jan 2013 21:31:01 +0000 (13:31 -0800)]
compat: backport netdev_set_default_ethtool_ops()
Stanislaw found that due to commit
2c60db03 by Eric Dumazet
the wireless core was not assigning driver specific ethtool_ops.
This was fixed by Stanislaw's commit
d07d7507 which added
netdev_set_default_ethtool_ops(). Since Eric's commit
2c60db03
is on v3.7-rc1 Stanislaw's fix is required down to v3.7 as well.
The
d07d7507 commit is currently present on v3.8-rc4 and is on
its way to what we think may be v3.7.5. Because of this kernels
older than v3.7.5 will require the full implementation while
older kernels than v3.7.0 will require just assigning the ops
passed only if netdev has no ops already set just as we used
to have it implemented on cfg80211.
mcgrof@frijol ~/linux-stable (git::linux-3.8.y)$ git describe --contains 2c60db
v3.7-rc1~145^2~142
mcgrof@frijol ~/linux-stable (git::linux-3.8.y)$ git describe --contains d07d75
v3.8-rc4~29^2~4
ckmake results:
1 2.6.24 [ OK ]
2 2.6.25 [ OK ]
3 2.6.26 [ OK ]
4 2.6.27 [ OK ]
5 2.6.28 [ OK ]
6 2.6.29 [ OK ]
7 2.6.30 [ OK ]
8 2.6.31 [ OK ]
9 2.6.32 [ OK ]
10 2.6.33 [ OK ]
11 2.6.34 [ OK ]
12 2.6.35 [ OK ]
13 2.6.36 [ OK ]
14 2.6.37 [ OK ]
15 2.6.38 [ OK ]
16 2.6.39 [ OK ]
17 3.0.50 [ OK ]
18 3.1.10 [ OK ]
19 3.2.33 [ OK ]
20 3.3.8 [ OK ]
21 3.4.17 [ OK ]
22 3.5.7 [ OK ]
23 3.6.5 [ OK ]
24 3.7.0 [ OK ]
real 0m34.791s
user 11m38.572s
sys 3m56.927s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:23 +0000 (17:34 +0100)]
compat: fix warning in usb_autopm_get_interface_no_{resume,suspend}
This fixes the following warning on kernel version <= 2.6.31.
/compat/compat-2.6.33.c: In function ‘usb_autopm_get_interface_no_resume’:
/compat/compat-2.6.33.c:32:2: warning: passing argument 1 of ‘atomic_inc’ from incompatible pointer type [enabled by default]
/arch/x86/include/asm/atomic_64.h:85:20: note: expected ‘struct atomic_t *’ but argument is of type ‘int *’
/compat/compat-2.6.33.c: In function ‘usb_autopm_put_interface_no_suspend’:
/compat/compat-2.6.33.c:51:2: warning: passing argument 1 of ‘atomic_dec’ from incompatible pointer type [enabled by default]
/arch/x86/include/asm/atomic_64.h:98:20: note: expected ‘struct atomic_t *’ but argument is of type ‘int *’
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:22 +0000 (17:34 +0100)]
compat: add ETHTOOL_FWVERS_LEN
In older kernel version this was hard coded to 32
This was added in this commit:
commit
141518c95870228da4e050fbe31a8f0c9df82c72
Author: Matt Carlson <mcarlson@broadcom.com>
Date: Thu Dec 3 08:36:22 2009 +0000
tg3: Add some VPD preprocessor constants
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:21 +0000 (17:34 +0100)]
compat: add simple_write_to_buffer
This was copied from fs/libfs.c
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:20 +0000 (17:34 +0100)]
compat: add missing return value to netif_set_real_num_tx_queues
This fixes the following warning:
compat/compat-2.6.35.o
compat/compat-2.6.35.c: In function ‘netif_set_real_num_tx_queues’:
compat/compat-2.6.35.c:45:1: warning: control reaches end of non-void function [-Wreturn-type]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Wed, 9 Jan 2013 16:34:19 +0000 (17:34 +0100)]
compat: fix warning of missing struct netdev_queue
Fix a warning on kernel version <= 2.6.26:
include/linux/compat-3.3.h:44:49: warning: ‘struct netdev_queue’ declared inside parameter list [enabled by default]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 27 Dec 2012 17:19:41 +0000 (18:19 +0100)]
compat: export platform_device_register_data()
platform_device_register_data has to be exported for kernel
version < 2.6.33. Some of these kernel have this method but do not
export it and only kernel version < 2.6.28 does not have this function.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Hauke Mehrtens [Thu, 27 Dec 2012 17:19:40 +0000 (18:19 +0100)]
compat: fix compiler warning in nla_get_s64()
This fixes the following warning:
compat/include/linux/compat-3.7.h: In function ‘nla_get_s64’:
compat/include/linux/compat-3.7.h:191:2: warning: passing argument 2 of ‘nla_memcpy’ discards ‘const’ qualifier from pointer target type [enabled by default]
In file included from include/net/genetlink.h:5:0,
from compat/include/linux/compat-2.6.32.h:12,
from compat/include/linux/compat-2.6.29.h:13,
from compat/include/linux/compat-2.6.h:50,
from <command-line>:0:
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 20 Dec 2012 02:17:56 +0000 (18:17 -0800)]
compat: move HID_USB_DEVICE and HID_BLUETOOTH_DEVICE
These were actually introduced in 2.6.28.h and as such
we were getting a lot of redefinition warnings which
can cause delays in compilation. Lets clear this up ;)
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 20 Dec 2012 00:36:38 +0000 (16:36 -0800)]
compat: add ionice to ckmake again
This adds back the ionice settings on the make
call. The copying of content on the thread is not
yet reniced and although Python has utilities to
modify niceness and ionice there are privileged
requirements on the levels we want and I'm not too
sure yet how to resolve this in a reasonable way.
This for example fails:
p = psutil.Process(os.getpid())
delta = -20 - os.nice(0)
p.set_nice(delta)
p.set_ionice(psutil.IOPRIO_CLASS_RT)
This improves perfomance by about 1 minute.
real 17m53.079s
user 446m12.733s
sys 66m13.372s
Since ckmake is multithreaded now though it meant that
we had to copy the content of the code that we want to
compile for each kernel on a new directory. This work
is not reprioritized as it is nice so the best thing
I can think of is we renice the ckmake process our
ourselves and therefore children would properly inherit
the priority.
ionice -c 3 nice -n 20 ckmake
Can we do better without networking the solution ?
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 19 Dec 2012 04:06:39 +0000 (20:06 -0800)]
compat: rewrite ckmake in Python
This rewrites ckmake in Python. I suspected that we can still
improve compilation down by making ckmake multithreaded.
I was right, and in order to make this multithreaded I picked
python and ncurses to display results. This shaves down 6
minutes for compilation of compat-drivers on 24 kernels from
25 minutes down to 19 minutes. This can likely be improved
further.
Before:
real 25m28.705s
user 506m26.003s
sys 69m45.990s
After:
real 19m4.757s
user 486m26.236s
sys 70m5.579s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:59:59 +0000 (16:59 -0800)]
compat: add 3.2 and 3.3 kernels to rebuild headers
The 3.2 and 3.3 kernels also require rebuilding
kernel headers for glibc dependencies.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:54:01 +0000 (16:54 -0800)]
compat: fix get-compat-kernels for rebuilding kernel headers
We need to rebuild headers for kernels >= 3.4, and while at
it account for 4.0 and x.y kernels here x > 3.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:32:21 +0000 (16:32 -0800)]
compat: add support for forcing get-compat-kernels
Useful for cronjobs.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:26:14 +0000 (16:26 -0800)]
compat: add v3.7 to get-compat-kernels
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:22:35 +0000 (16:22 -0800)]
compat: adjust get-compat-kernels for root users
Prefix the download / target directory with compat-ksrc/
if root is used.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Sat, 15 Dec 2012 00:20:34 +0000 (16:20 -0800)]
compat: adjust get-compat-kernels for root usage
If the user id is root then don't assume we want it
under / but instead use the current directory.
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 19:45:05 +0000 (11:45 -0800)]
compat: backport platform_device_register_data()
Add the helper.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
d8bf254
v2.6.28-rc1~284^2~9
commit
d8bf254089a6c31d7d01a4d1d2f1861662900855
Author: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Mon Sep 22 14:41:40 2008 -0700
platform: add new device registration helper
Add a helper that registers simple platform_device w/o resources but with
parent and device data.
This is usefull to cleanup platform code from code that registers such
simple devices as leds-gpio, generic-bl, etc.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 1m58.798s
user 3m59.967s
sys 1m25.585s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 13 Dec 2012 04:38:14 +0000 (20:38 -0800)]
compat: fix compilation on hid_ignore()
This fixes compilation on the addition of hid_ignore()
for kernels older than 2.6.28.
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 1m58.798s
user 3m59.967s
sys 1m25.585s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Thu, 13 Dec 2012 04:18:00 +0000 (20:18 -0800)]
compat: backport struct hid_device_id
Kernels older than 2.6.28 did not have this
defined. Add it.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
e8c84f9a
v2.6.28-rc1~571^2~54
commit
e8c84f9a5f06912c94c38961096c994da3890a2e
Author: Jiri Slaby <jirislaby@gmail.com>
Date: Mon May 19 15:50:01 2008 +0200
modpost: add support for hid
Generate aliases for hid device modules to support autoloading.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 19:54:49 +0000 (11:54 -0800)]
compat: backport HID_USB_DEVICE() and HID_BLUETOOTH_DEVICE()
commit
070748ed0b52399858a5967026a452bbb903a64c
Author: Henrik Rydberg <rydberg@euromail.se>
Date: Mon Apr 23 12:07:05 2012 +0200
HID: Create a generic device group
Devices that do not have a special driver are handled by the generic
driver. This patch does the same thing using device groups; Instead of
forcing a particular driver, the appropriate driver is picked up by
udev. As a consequence, one can now move a device from generic to
specific handling by a simple rebind. By adding a new device id to the
generic driver, the same thing can be done in reverse.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 17:47:09 +0000 (09:47 -0800)]
compat: add HID_QUIRK_IGNORE
Just add the define.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
6f4303fb
v2.6.30-rc1~219^2~9
commit
6f4303fb2ec68055e793b84887a7ae0f9ea7cc2d
Author: Jiri Kosina <jkosina@suse.cz>
Date: Thu Jan 29 00:15:51 2009 +0100
HID: bring back possibility to specify vid/pid ignore on module load
When hid quirks were converted to specialized driver, the HID_QUIRK_IGNORE
has been moved completely, as the hid_ignore_list[] has been moved into the
generic code.
However userspace already got used to the possibility that modprobing
usbhid with
'quirks=vid:pid:0x4'
makes the device ignored by usbhid driver. So keep this quirk flag in place
for backwards compatibility.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 15:49:18 +0000 (07:49 -0800)]
compat: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE
We just need the definitions.
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
b5e5a37e
v2.6.35-rc1~454^2~5^2~14
commit
b5e5a37e36cd4d355b875665312d7aaae4e5833c
Author: Bastien Nocera <hadess@hadess.net>
Date: Fri Apr 16 17:19:50 2010 +0100
HID: add HID_QUIRK_HIDDEV_FORCE and HID_QUIRK_NO_IGNORE
Add two quirks to make it possible for usbhid module options to
override whether a device is ignored (HID_QUIRK_NO_IGNORE) and
whether to connect a hiddev device (HID_QUIRK_HIDDEV_FORCE).
Passing HID_QUIRK_NO_IGNORE for your device means that it will
not be ignored by the HID layer, even if present in a blacklist.
HID_QUIRK_HIDDEV_FORCE will force the creation of a hiddev for that
device, making it accessible from user-space.
Tested with an Apple IR Receiver, switching it from using appleir
to using lirc's macmini driver.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:47:44 +0000 (18:47 -0800)]
compat: backport definition of HID_TYPE_USBNONE
This is declared within the enum:
enum hid_type {
HID_TYPE_OTHER = 0,
HID_TYPE_USBMOUSE,
HID_TYPE_USBNONE
};
But we just declare it as a define for 2.
This backports was added with the below commit:
mcgrof@frijol ~/linux-next (git::master)$ git describe --contains
6dc1418e
v3.1-rc1~309^2^2~14
commit
6dc1418e13144162e8bc4858789010d8f0e1e65c
Author: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Date: Mon May 23 15:45:44 2011 -0700
HID: yurex: recognize GeneralKeys wireless presenter as generic HID
Unfortunately, the device seems to have the same Vendor ID and Product ID
as YUREX leg-shakes sensors, and the commit
6bc235a2e2 ("USB: add driver
for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list.
I believe that we can distinguish YUREX and the Wireless Presenter by
device type. The patch below makes the driver ignore only YUREX
(bInterfaceProtocol==0), and recognize Wireless Presenter
(bInterfaceProtocol is keyboard or mouse) as generic HID. (I don't have
the Wireless Presenter, so not yet ested.)
** YUREX lsusb information:
Bus 002 Device 007: ID 0c45:1010 Microdia
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0c45 Microdia
idProduct 0x1010
bcdDevice 0.03
iManufacturer 1 JESS
iProduct 2 YUREX
iSerial 3
10000269
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 31
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0002
(Bus Powered)
Remote Wakeup Enabled
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Reported-by: Thomas B?chler <thomas@archlinux.org>
Tested-by: Thomas B?chler <thomas@archlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:26:45 +0000 (18:26 -0800)]
compat: backport PCI_EXP_LNKCTL_ASPM_L0S and PCI_EXP_LNKCTL_ASPM_L1
This backports the addition of two defines added by the
commit below.
commit
7508320678b7819ac6aeb89580b8622a424ce586
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Dec 5 13:51:19 2012 -0700
PCI: Add standard PCIe Capability Link ASPM field names
Add standard #defines for ASPM fields in PCI Express Link Capability and
Link Control registers.
Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:09:10 +0000 (18:09 -0800)]
compat: backport hid_ignore()
We backport hid_ignore() as of next-
20121211, that is now
used by other drivers.
mcgrof@drvbp1 ~/compat (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-
02063904-generic [OK]
Trying kernel 2.6.38-
02063808-generic [OK]
Trying kernel 2.6.37-
02063706-generic [OK]
Trying kernel 2.6.36-
02063604-generic [OK]
Trying kernel 2.6.35-
02063513-generic [OK]
Trying kernel 2.6.34-
02063413-generic [OK]
Trying kernel 2.6.33-
02063320-generic [OK]
Trying kernel 2.6.32-
02063260-generic [OK]
Trying kernel 2.6.31-
02063113-generic [OK]
Trying kernel 2.6.30-
02063010-generic [OK]
Trying kernel 2.6.29-
02062906-generic [OK]
Trying kernel 2.6.28-
02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]
real 2m9.630s
user 8m55.525s
sys 2m2.460s
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Luis R. Rodriguez [Wed, 12 Dec 2012 02:05:49 +0000 (18:05 -0800)]
compat: generate CONFIG_COMPAT_KERNEL_3_8
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Johannes Berg [Fri, 7 Dec 2012 01:05:16 +0000 (17:05 -0800)]
compat: backport unsigned netlink attribute accessors
These were added upstream in commit
4778e0be16c291ba6d9d55eeff3a6764fc84a071.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
projects / openwrt / staging / blogic.git / log