Felix Fietkau [Sun, 15 Mar 2015 11:07:52 +0000 (11:07 +0000)]
scripts/feeds: remove useless install_method abstraction
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44778
Felix Fietkau [Sun, 15 Mar 2015 11:07:44 +0000 (11:07 +0000)]
scripts/feeds: add support for searching for targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44777
Felix Fietkau [Sun, 15 Mar 2015 11:07:40 +0000 (11:07 +0000)]
scripts/metadata.pl: move parse_target_metadata() to metadata.pm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44776
Felix Fietkau [Sun, 15 Mar 2015 11:07:34 +0000 (11:07 +0000)]
scripts/feeds: scan for target metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44775
Felix Fietkau [Sun, 15 Mar 2015 11:07:29 +0000 (11:07 +0000)]
build: use different grep strings for scanning package vs target metadata
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44774
Felix Fietkau [Sun, 15 Mar 2015 11:06:50 +0000 (11:06 +0000)]
scripts/feeds: remove a few trailing tabs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44773
Felix Fietkau [Sun, 15 Mar 2015 10:32:10 +0000 (10:32 +0000)]
uhttpd: make generating SSL keys more reliable against interrupted boots
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44772
Felix Fietkau [Sun, 15 Mar 2015 09:47:34 +0000 (09:47 +0000)]
lantiq: add a better fix to strip FCS from ethernet packets on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44771
Felix Fietkau [Sun, 15 Mar 2015 07:57:55 +0000 (07:57 +0000)]
ltq-vdsl-fw: fix md5sum for new firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44770
Felix Fietkau [Sun, 15 Mar 2015 07:57:51 +0000 (07:57 +0000)]
lantiq: enable atm-esi by default for xrx200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44769
Felix Fietkau [Sun, 15 Mar 2015 07:10:38 +0000 (07:10 +0000)]
ath9k: disable TPC support for now until bugs have been found and fixed
SVN-Revision: 44768
Felix Fietkau [Sun, 15 Mar 2015 06:51:45 +0000 (06:51 +0000)]
ltq-vdsl-fw: update firmware cutter URL for newer Speedport firmware (fixes #19160)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44767
John Crispin [Sun, 15 Mar 2015 06:35:18 +0000 (06:35 +0000)]
toolchain: r44701 accidentially removed the uclibc default when TOOLCHAINOPTS is set
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44766
John Crispin [Sun, 15 Mar 2015 06:35:13 +0000 (06:35 +0000)]
kernel: enable open by fhandle syscalls
This is needed by many services to function properly and as
all modern distributions got it enabled, it starts to be a
de-facto standard, i.e. user-space starts to silently depend
on it.
This also pulls in EXPORTFS, however, the kernel binary size
increases only a little.
On ARM systems comes down to 800 bytes uncompressed and about
200 bytes compressed size.
On MIPS systems it's about 1.2 kB size increase of the LZMA
compressed kernel.
v2: use menuconfig option instead of just enabling the option
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44765
Felix Fietkau [Sun, 15 Mar 2015 05:18:50 +0000 (05:18 +0000)]
brcm2708: fix mkdosfs command line options order
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44764
Felix Fietkau [Sun, 15 Mar 2015 05:18:45 +0000 (05:18 +0000)]
dosfstools: fix build on OS X
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44763
Felix Fietkau [Sun, 15 Mar 2015 05:18:40 +0000 (05:18 +0000)]
dosfstools: update to v3.0.27
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44762
Felix Fietkau [Sun, 15 Mar 2015 05:12:11 +0000 (05:12 +0000)]
scripts: fix ubinize-image on OS X
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44761
Felix Fietkau [Sun, 15 Mar 2015 05:07:10 +0000 (05:07 +0000)]
patch: bump GNU patch to 2.7.5
Bump GNU patch in tools from 2.7.1 to 2.7.5.
Change download URL to use @GNU alias.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 44760
Felix Fietkau [Sun, 15 Mar 2015 04:43:37 +0000 (04:43 +0000)]
x86: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44759
Felix Fietkau [Sun, 15 Mar 2015 04:43:30 +0000 (04:43 +0000)]
x86: update to kernel 3.18
copied target/linux/x86/config-3.14 and target/linux/x86/patches-3.14 to
3.18 equivalents and then tweaked until it built.
Tested on alix2, soekris net4826 and soekris net4521.
Still having trouble with net4826 booting from Grub, alix2 and net4521
are fine.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 44758
Felix Fietkau [Sun, 15 Mar 2015 04:43:22 +0000 (04:43 +0000)]
kernel: fix portability issues of the x86 vdso2c utility
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44757
Felix Fietkau [Sun, 15 Mar 2015 04:40:10 +0000 (04:40 +0000)]
kernel: add missing config symbol for 3.18+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44756
Rafał Miłecki [Sat, 14 Mar 2015 16:35:56 +0000 (16:35 +0000)]
bcm53xx: support NVRAM prefixes with extra / in devpath
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44755
Felix Fietkau [Sat, 14 Mar 2015 12:12:25 +0000 (12:12 +0000)]
ath9k: always select relay support, not just when debugfs is enabled - fixes an unresolved symbol error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44754
Felix Fietkau [Sat, 14 Mar 2015 08:38:35 +0000 (08:38 +0000)]
x86: disable rts/cts for serial console in grub - fixes net48xx boot issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44753
Felix Fietkau [Sat, 14 Mar 2015 08:21:02 +0000 (08:21 +0000)]
grub2: fix processing the serial rts/cts option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44752
Felix Fietkau [Sat, 14 Mar 2015 05:38:14 +0000 (05:38 +0000)]
kernel: linux 3.19 also needs the network namespace related fd export patch (#19161)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44751
Felix Fietkau [Sat, 14 Mar 2015 02:00:50 +0000 (02:00 +0000)]
ath: fix selecting the module individually (#19162)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44750
Felix Fietkau [Sat, 14 Mar 2015 02:00:44 +0000 (02:00 +0000)]
mac80211: fix a rounding issue in minstrel MCS rate duration calculation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44749
Felix Fietkau [Sat, 14 Mar 2015 02:00:36 +0000 (02:00 +0000)]
mac80211: improve powersave handling in the tx queue rework patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44748
John Crispin [Fri, 13 Mar 2015 08:39:08 +0000 (08:39 +0000)]
dnsmasq: enable pxe-prompt, pxe-service config options
DNSMASQ has the ability to provide a menu to a pxeboot system, using
the --pxe-prompt and --pxe-service configuration options. The current
init.d script converting the "dhcp" file to "dnsmasq.conf" does not
find these options, but they are supported. This patch thus enables
the options.
Signed-off-by: Derek LaHousse <dlahouss@mtu.edu>
SVN-Revision: 44747
John Crispin [Fri, 13 Mar 2015 08:38:56 +0000 (08:38 +0000)]
BusyBox: Netcat 1.10 compatibility require server option
Netcat 1.10 compatibility require server options
1.10 compatibility without server option
produce error "NO OPT l!" and completely not function
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 44746
John Crispin [Fri, 13 Mar 2015 08:38:46 +0000 (08:38 +0000)]
relayd: bump to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44745
John Crispin [Fri, 13 Mar 2015 08:38:35 +0000 (08:38 +0000)]
dnsmasq: Make parameters optional in dhcpboot config
The --dhcp-boot option of dnsmasq does not require servername and serveraddress
arguments if the builtin tftp server is used.
Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>
SVN-Revision: 44744
John Crispin [Fri, 13 Mar 2015 08:38:25 +0000 (08:38 +0000)]
lldpd: make LLDP-MED, DOT1 and DOT3 extensions disable-able
The names for the config options were taken from lldpd's
configure.ac file.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44743
John Crispin [Fri, 13 Mar 2015 08:38:17 +0000 (08:38 +0000)]
ipset: add ipmark support
Below you'll find a patch to add ipmark module support to ipset.
Changeset 44671 already bumped ipset to version 6.24, but it's still
compiled without ipmark support. This is a requirement for mwan3 v1.6.
Signed-off-by: Jeroen Louwes <jeroen.louwes@gmail.com>
SVN-Revision: 44742
John Crispin [Fri, 13 Mar 2015 08:38:08 +0000 (08:38 +0000)]
ralink: support change tx/rx ring size
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44741
John Crispin [Fri, 13 Mar 2015 08:38:01 +0000 (08:38 +0000)]
ralink: use random generate mac address instead of default one.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44740
John Crispin [Fri, 13 Mar 2015 08:37:45 +0000 (08:37 +0000)]
ralink: add wifi 5g dts info for cy-swr1100
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44739
Felix Fietkau [Fri, 13 Mar 2015 05:17:06 +0000 (05:17 +0000)]
mac80211: fix a pointer handling error in the new tx queueing code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44738
Felix Fietkau [Fri, 13 Mar 2015 03:02:34 +0000 (03:02 +0000)]
ath25: set myself as maintainer
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44737
Felix Fietkau [Fri, 13 Mar 2015 03:02:28 +0000 (03:02 +0000)]
Rename 'atheros' target to 'ath25'
Rename 'atheros' target to more precise 'ath25'.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44736
Felix Fietkau [Fri, 13 Mar 2015 03:02:21 +0000 (03:02 +0000)]
atheros: remove odd board check during image build
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44735
Felix Fietkau [Fri, 13 Mar 2015 03:02:17 +0000 (03:02 +0000)]
atheros: remove linux 3.14
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44734
Felix Fietkau [Fri, 13 Mar 2015 03:02:12 +0000 (03:02 +0000)]
atheros: switch to 3.18
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44733
Felix Fietkau [Fri, 13 Mar 2015 03:02:08 +0000 (03:02 +0000)]
atheros: v3.18: renumber backported patches
Move first 3 patches to 0xx numbers range to denote that this is
backported code and they should be removed when we update
kernel to version >= 3.19
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44732
Felix Fietkau [Fri, 13 Mar 2015 03:02:00 +0000 (03:02 +0000)]
atheros: v3.18: non-functional cleanup
To finally sync code with upsream cleanup registers headers, and update
several comments and kernel config symbols descriptions. No functional
changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44731
Felix Fietkau [Fri, 13 Mar 2015 03:01:50 +0000 (03:01 +0000)]
atheros: v3.18: cleanup includes
Remove odd and add missed includes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44730
Felix Fietkau [Fri, 13 Mar 2015 03:01:42 +0000 (03:01 +0000)]
atheros: v3.18: rearrange code between patches
Cleanup board patch by moving code to specific patches, and factor out
leds to separate patch. No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44729
Felix Fietkau [Fri, 13 Mar 2015 03:01:37 +0000 (03:01 +0000)]
atheros: v3.18: move GPIO patches behind PCI
Move GPIO patches behind PCI patch, since they are not yet merged
upstream.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44728
Felix Fietkau [Fri, 13 Mar 2015 03:01:31 +0000 (03:01 +0000)]
atheros: v3.18: switch to IRQ domain
Rework MISC and PCI IRQ controllers code to use IRQ domains and bitops.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44727
Felix Fietkau [Fri, 13 Mar 2015 03:01:21 +0000 (03:01 +0000)]
atheros: v3.18: update register names
Make register names more consistent, mostly add appropriate prefix
(AR5312_ or AR2315_) or _BASE suffix. Also add macro to simplify mask
and shift operation.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44726
Felix Fietkau [Fri, 13 Mar 2015 03:01:17 +0000 (03:01 +0000)]
atheros: v3.18: remap flash for boardconfig parsing
Rework boardconfig handling code to honestly remap flash memory region.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44725
Felix Fietkau [Fri, 13 Mar 2015 03:01:11 +0000 (03:01 +0000)]
atheros: v3.18: make registers headers local
There are no external users (last one was PCI driver) for these headers,
so move them to arch directory. Few macroses from ar231x.h header moved
to devices.h and file was removed.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44724
Felix Fietkau [Fri, 13 Mar 2015 03:01:04 +0000 (03:01 +0000)]
atheros: v3.18: remap main SoC MMR memory
Honestly remap main SoC MMR mem and use accessor functions to
interact with registers. Now registers defined relatively to base
address (e.g. SDRAM controller base address).
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44723
Felix Fietkau [Fri, 13 Mar 2015 03:00:59 +0000 (03:00 +0000)]
atheros: v3.18: cleanup register headers
AFAIK, no one AR2315+ chip (AR2315, AR2316, AR2317, AR2318) does not
contain IR block, so remove IR registers definitions. Also remove few
unused macroses.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44722
Felix Fietkau [Fri, 13 Mar 2015 03:00:51 +0000 (03:00 +0000)]
atheros: v3.18: pass PCI IRQ and I/O mem via resources
Pass PCI IRQ and I/O memory ranges via platform device resources, this
change makes PCI controller driver independed from arch headers, so
also remove few includes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44721
Felix Fietkau [Fri, 13 Mar 2015 03:00:43 +0000 (03:00 +0000)]
atheros: v3.18: remap PCI controller MMR memory
Honestly remap PCI controller MMR and use accessor functions to interact
with registers.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44720
Felix Fietkau [Fri, 13 Mar 2015 03:00:19 +0000 (03:00 +0000)]
atheros: v3.18: add context container for PCI driver
Add container and place all context specific variables and structure to
it.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44719
Felix Fietkau [Fri, 13 Mar 2015 03:00:06 +0000 (03:00 +0000)]
atheros: v3.18: move PCI enable code to arch
Move PCI host interface enable code to arch, since it touches generic
SoC registers outside the PCI MMR region.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44718
Felix Fietkau [Fri, 13 Mar 2015 02:59:54 +0000 (02:59 +0000)]
atheros: v3.18: rearrange PCI regs definitions
Move PCI controller configuration registers from generic header to
driver source. No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44717
Felix Fietkau [Fri, 13 Mar 2015 02:59:43 +0000 (02:59 +0000)]
atheros: v3.18: relocate PCI host DMA base definition
Put AR2315_PCI_HOST_SDRAM_BASEADDR macro to DMA header, since this is
arbitrary value and not some hw specific constant. Also this relocation
decouples dma from HW specific header.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44716
Felix Fietkau [Fri, 13 Mar 2015 02:59:27 +0000 (02:59 +0000)]
atheros: v3.18: rework early initialization
Do not use prom_init() callback, do memory initialization in
plat_mem_setup() callback and move serial port configuration to
arch_initcall stage.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44715
Felix Fietkau [Fri, 13 Mar 2015 02:59:19 +0000 (02:59 +0000)]
atheros: v3.18: rearrange interrupt handling functions
No functional changes, just change functions order in source file.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44714
Felix Fietkau [Fri, 13 Mar 2015 02:59:04 +0000 (02:59 +0000)]
atheros: v3.18: change calls logic
Check SoC family (AR5312+ or AR2315+) before call instead of checking it
inside the called function. Also convert ar{5312,2315}_init_device()
function to void, since they both return zero and nobody care about
return value.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44713
Felix Fietkau [Fri, 13 Mar 2015 02:58:58 +0000 (02:58 +0000)]
atheros: v3.18: update names and declarations
Sync functions, variables and enums names with upstream. Mostly replace
'ar231x_' prefix by 'ath25_'.
No functional changes, except few 'int' -> 'unsigned' changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44712
Felix Fietkau [Fri, 13 Mar 2015 02:58:49 +0000 (02:58 +0000)]
atheros: v3.18: cleanup cpu-feature-overrides.h
Remove mention of undefined features.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44711
Felix Fietkau [Fri, 13 Mar 2015 02:58:37 +0000 (02:58 +0000)]
atheros: v3.18: remove eth platform device unused field
Ethernet controller driver don't use boarddata directly, so remove
corresponding field from its platform device structure.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44710
Felix Fietkau [Fri, 13 Mar 2015 02:58:24 +0000 (02:58 +0000)]
atheros: v3.18: remove odd header reset.h
This header provides prototype for function without realization and
users.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44709
Felix Fietkau [Fri, 13 Mar 2015 02:58:17 +0000 (02:58 +0000)]
atheros: v3.18: rename platform header
Rename ar231x_platform.h to ath25_platform.h
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44708
Felix Fietkau [Fri, 13 Mar 2015 02:57:59 +0000 (02:57 +0000)]
atheros: v3.18: rename kernel platform to ath25
Rename platform source directory and asm includes directory.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44707
Felix Fietkau [Fri, 13 Mar 2015 02:57:51 +0000 (02:57 +0000)]
atheros: v3.18: rename ATHEROS_AR231X symbol to ATH25
This patch starts upsteam ath25 code backporting.
No functional changes.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44706
Felix Fietkau [Fri, 13 Mar 2015 02:57:41 +0000 (02:57 +0000)]
atheros: add v3.18 support
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44705
John Crispin [Thu, 12 Mar 2015 20:29:58 +0000 (20:29 +0000)]
glibc: make it more obvious that eglibc is a version of glibc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44704
John Crispin [Thu, 12 Mar 2015 20:29:50 +0000 (20:29 +0000)]
glibc: remove accidentally commited folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44703
John Crispin [Thu, 12 Mar 2015 19:50:57 +0000 (19:50 +0000)]
toolchain: The glorious return of glibc, ver 2.21
It's the eglibc packaging with a bit of spit-polishing. And testing. :-)
[blogic: merged glibc and eglibc into 1 and made eglibc a glibc variant]
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44701
John Crispin [Thu, 12 Mar 2015 19:50:23 +0000 (19:50 +0000)]
busybox: Minor fix for glibc 2.21 compatibility
Signed-off-by: Jeff Waugh <jdub@bethesignal.org>
SVN-Revision: 44700
John Crispin [Thu, 12 Mar 2015 19:50:14 +0000 (19:50 +0000)]
fstools: bump to latest git HEAD
this makes fstools compile with latest glibc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44699
John Crispin [Thu, 12 Mar 2015 19:50:00 +0000 (19:50 +0000)]
procd: bump to latest git HEAD
this makes procd compile with latest glibc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44698
Felix Fietkau [Thu, 12 Mar 2015 16:21:53 +0000 (16:21 +0000)]
ath9k: fix a beacon enable handling bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44696
Felix Fietkau [Thu, 12 Mar 2015 15:27:44 +0000 (15:27 +0000)]
kernel: backport fib_trie improvements/fixes from 4.0-rc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44695
John Crispin [Thu, 12 Mar 2015 10:07:01 +0000 (10:07 +0000)]
uClibc: fix syscall() for syscalls with 6 arguments on PowerPC
Patch from the uClibc master.
Fixes the package fastd on PowerPC.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44694
John Crispin [Thu, 12 Mar 2015 10:06:53 +0000 (10:06 +0000)]
ar71xx: Ext LNA patch for TUBE2H and HORNET-UB targets
Signed-off-by: Christophe Prévotaux <c.prevotaux@rural-networks.com>
SVN-Revision: 44693
John Crispin [Thu, 12 Mar 2015 10:06:42 +0000 (10:06 +0000)]
ar71xx: Hornet UB GPIO WPS/Reset
This problem has existed at least since Attitude Adjustment and
is also present in trunk. Basically on the Hornet-UB board the
functionality of RESET and WPS have "switched places".
There are two tickets about the issue at dev.openwrt.org,
The solution suggested on them both is incomplete though
and introduces the following proglem:
Patching as suggested on #14136/#15282 will result in a situation
where simply pressing the RESET button on the bottom will cause
FACTORY RESET to be run. This is due to GPIO high/low state being
incorrect as a result of the above change and virtually the RESET
button is in the pressed-down state the entire time. When it is
then physically pressed, that causes the opposite, release, to be
triggered and since to the board it seemed that the button was
pressed long before it was released, the FACTORY RESET results.
The attached patch works as expected. I have verified both the
incorrect functionality as well as after fixing the issue as
described in the patch and flashing the resulting firmware to a
Hornet-UB board.
Signed-off-by: Janne Cederberg <janne.cederberg@gmail.com>
SVN-Revision: 44692
John Crispin [Thu, 12 Mar 2015 10:06:31 +0000 (10:06 +0000)]
ralink: resize the flash partition for FireWRT
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 44691
John Crispin [Thu, 12 Mar 2015 10:06:17 +0000 (10:06 +0000)]
ralink: MT7621 add i2c controller driver
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Signed-off-by: daixj <fl.service@t-firefly.com>
SVN-Revision: 44690
John Crispin [Thu, 12 Mar 2015 10:06:08 +0000 (10:06 +0000)]
lldpd: add support for 'readonly_mode'
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44689
John Crispin [Thu, 12 Mar 2015 10:06:01 +0000 (10:06 +0000)]
modules: set dwc2 gadget dependency for at91
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44688
John Crispin [Thu, 12 Mar 2015 10:05:54 +0000 (10:05 +0000)]
acx-mac80211: fails to build on cobalt
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44687
John Crispin [Thu, 12 Mar 2015 10:05:48 +0000 (10:05 +0000)]
cobalt: framebuffer device has moved
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44686
Mirko Vogt [Thu, 12 Mar 2015 00:39:50 +0000 (00:39 +0000)]
disable silent-rules by default
OpenWrt hides verbose output by default,
regardless of automake silent-rules being en-/disabled.
If we enable verbose output for package builds (V=s)
however, we'd like to see as most as possible.
Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 44685
Mirko Vogt [Thu, 12 Mar 2015 00:39:48 +0000 (00:39 +0000)]
Do not use $(V) - force AM_V=1
Projects using silent-rules might otherwise fail to compile.
This is due to the following resulting Makefile code:
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
Automake directly uses $(V) for variable name expansion
which fails if $(V) is set to sth. else other than '0' or '1'.
This patch forces automake to not take $(V) into account
but to always use the default config for verbosity.
A better approach would be to actually take $(V) into account,
however not just pass it through (AM_V='$(V)') but
set AM_V to 0 if $V=0 / unset and to 1 otherwise.
This plan however is foiled due to my frustration about
automake as well as my lack of m4 skills.
automake bug report: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=20077
Signed-off-by: Mirko Vogt <mirko@openwrt.org>
SVN-Revision: 44684
John Crispin [Wed, 11 Mar 2015 17:58:53 +0000 (17:58 +0000)]
modules: make dwc2 only depend on gadget support for brcm2708
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44683
John Crispin [Wed, 11 Mar 2015 17:58:47 +0000 (17:58 +0000)]
uhttp: update to latest git HEAD
this add json-c 0.12, sorry forgot to push this earlier today
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44682
Felix Fietkau [Wed, 11 Mar 2015 17:32:29 +0000 (17:32 +0000)]
kernel: backport symbol export from r44653 to 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44681
Rafał Miłecki [Wed, 11 Mar 2015 17:32:02 +0000 (17:32 +0000)]
bcm53xx: fixup early device id 8012
Looks like the BCM53012 has a similar problem to the BCM53011.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44680
Rafał Miłecki [Wed, 11 Mar 2015 17:10:19 +0000 (17:10 +0000)]
bcm53xx: fix typo in bcm47xx sprom driver
Fix thinko' in the bcm47xx sprom driver.
Signed-off-by: Ian Kent <raven@themaw.net>
SVN-Revision: 44679
John Crispin [Wed, 11 Mar 2015 17:08:46 +0000 (17:08 +0000)]
kenrel: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44678
John Crispin [Wed, 11 Mar 2015 17:08:40 +0000 (17:08 +0000)]
lantiq: make the new dwc2 support only work for vr9
danube needs to be added
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44677
projects / openwrt / staging / ynezz.git / log