setools: Update to 4.4.3

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

node: bump to v18.18.0

Update to v18.18.0

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

Merge pull request #22134 from jefferyto/rust-cargo-rustflags

rust: Set rustflags by environment variable

fastd: update repository URL

I've changed my username to neocturne.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

libuecc: update repository URL

I've changed my username to neocturne.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

bind: update to version 9.18.18

Release notes:
https://downloads.isc.org/isc/bind9/9.18.18/doc/arm/html/notes.html#notes-for-bind-9-18-18
https://downloads.isc.org/isc/bind9/9.18.17/doc/arm/html/notes.html#notes-for-bind-9-18-17

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

slirp4netns: update to 1.2.2

v1.2.2 changes:
 - Enabled reproducible builds

v1.2.1 changes:
 - sandbox: Add support for escaping resolv.conf symlinks. This fixes usage in WSL environments which symlinks /etc/resolv.conf under a shared location under /mnt.

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

knot: update to version 3.3.1

Signed-off-by: Jan Hák <jan.hak@nic.cz>

rclone: Update to 1.64.0

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

collectd: remove target dependency from cpufreq plugin

We currently have more package architectures supporting
CPU frequency scaling than earlier, and the package architecture
vs. CPU target SDK matching does not fully reflect that.
(E.g. aarch64_cortex-a53 is currently using bcm27xx/bcm2710)

Simplify things by removing the target dependency and let the plugin
be built for all architectures.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

Merge pull request #22130 from oskarirauta/dockerd

dockerd: busybox compatibility

Merge pull request #22126 from oskarirauta/podman

podman: depend on catatonit

rust: Set rustflags by environment variable

In order to use $(RUSTC_TARGET_ARCH) in HOST_BUILD_DIR, the line to
include rust-values.mk in the Rust makefile was moved in
f489e019ac4a15e974518d9928ef913a157d135a, causing it to be included
before package.mk is included.

This had the side effect of preventing "-lssp_nonshared" from being
added to RUSTC_LDFLAGS, because PKG_SSP is indirectly set by package.mk
(package.mk includes hardening.mk, hardening.mk sets PKG_SSP).

There is a deeper issue; it is the Rust package's PKG_SSP value that
causes RUSTC_LDFLAGS to be set and written to the Cargo config file. For
packages that use Rust to build, their PKG_SSP value does not affect the
linker flag.

This sets rustflags with the RUSTFLAGS environment variable, instead of
writing the value to the Cargo config file, allowing PKG_SSP from the
package being built to be used and for the package being built to modify
the rustflags used.

This also:

* Fix "-lssp_nonshared" being added to TARGET_CFLAGS instead of
  RUSTC_LDFLAGS, when CONFIG_PKG_CC_STACKPROTECTOR_STRONG is set.

* Remove the use of $(RUSTC_TARGET_ARCH) in HOST_BUILD_DIR and move the
  include line for rust-values.mk back to after package.mk.

  Since the host build directory was moved under the target build
  directory in efdbac38dc8b649ca26b49fac27abeb5cf76cd28, it is no longer
  necessary to separate build directories with RUSTC_TARGET_ARCH;
  $(BUILD_DIR) already separates build directories by target.

* Add BUILDONLY:=1, as the Rust package does not build a target package.

* Install the Cargo config file as "config.toml" instead of "config", as
  this is the preferred form[1].

* Rename RUST_CFLAGS to RUSTC_CFLAGS and CONFIG_HOST_SUFFIX to
  RUSTC_HOST_SUFFIX, for consistency.

* Allow CARGO_VARS to be set before rust-values.mk is included.

[1]: https://doc.rust-lang.org/cargo/reference/config.html#hierarchical-structure

Fixes: f489e019ac4a ("rust: compile host package per target")
Fixes: 83785a7ce016 ("rust-lang: Add the rust language support")
Fixes: https://github.com/openwrt/packages/issues/22133
Signed-off-by: Jeffery To <jeffery.to@gmail.com>

Merge pull request #22091 from pprindeville/isc-dhcp-fix-require-parameters-delim

isc-dhcpd: Generate correct delimiter in hex strings

isc-dhcp: Allow per-subnet domain names

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

isc-dhcpd: Generate correct delimiter in hex strings

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

Merge pull request #22132 from pprindeville/perl-text-csv_xs-update-1.51

perl-text-csv_xs: Update to 1.51

Merge pull request #22131 from pprindeville/perl-cgi-update-4.57

perl-cgi: Update to 4.57

perl-text-csv_xs: Update to 1.51

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

perl-cgi: Update to 4.57

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

dockerd: busybox compatibility

build hosts with busybox fail with long options on rm
command. Short versions are supported by all, so this
makes it script compatible with busybox hosts as well.

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

Merge pull request #22128 from BKPepe/ffmpeg

ffmpeg: update to version 5.1.3

ffmpeg: update to version 5.1.3

Fixes CVEs:
CVE-2022-3964 [1]
CVE-2022-3965 [2]

[1] https://nvd.nist.gov/vuln/detail/CVE-2022-3964
[2] https://nvd.nist.gov/vuln/detail/CVE-2022-3965

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

iperf3: update to 3.15

see changelog: https://github.com/esnet/iperf/releases/tag/3.15.

Signed-off-by: Leo Douglas <douglarek@gmail.com>

podman: depend on catatonit

podman still seems to use catatonit with
rootless containers. It seems that it is
possible to use alternatives, such as tini,
but maybe go the same way they went on mainstream.

This PR just adds catatonit to depends.

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

Merge pull request #22122 from stangri/master-https-dns-proxy

https-dns-proxy: improve boot up start

https-dns-proxy: improve boot up startup

Signed-off-by: Stan Grishin <stangri@melmac.ca>

Merge pull request #22118 from stangri/master-adblock-fast

adblock-fast: bugfix: remove domains on allow

aardvark-dns: update to 1.7.0

Changelog: https://github.com/containers/aardvark-dns/compare/v1.6.0...v1.7.0

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

netavark: update to 1.7.0

Changelog: https://github.com/containers/netavark/compare/v1.6.0...v1.7.0

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

podman: update to 4.6.2

patch refreshed.

Changelog:

 - Fixed a performance issue when calculating diff sizes in overlay. The podman system df command should see a significant performance improvement.
 - Fixed a bug where containers in a pod would use the pod restart policy over the set container restart policy.
 - Fixed a bug in the Compat Build endpoint where the pull query parameter did not parse 0/1 as a boolean.
 - Updated the containers/storage library to v1.48.1

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

crun: update to 1.9

Changes:
 - support arbitrary idmapped mounts. Now it is possible to specify a mapping for any type of mount, not only bind mounts.
 - add support for "ridmap" mount option to support recursive idmapped mounts.
 - fix check for oom_score_adj. Write the oom_score_adj file even when the new value is 0.
 - features: Support mountExtensions.
 - correctly handle unknown signal string when it doesn't start with a digit.
 - do not attempt to join again already joined namespace.
 - wasmer: use latest wasix API.
 - refresh libocispec

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

conmon: update to 2.1.8

Bug fixes:
 - stdio: ignore EIO for terminals
 - ensure console socket buffers are properly sized
 - conmon: drop return after pexit()
 - ctrl: make accept4 failures fatal
 - logging: avoid opening /dev/null for each write
 - oom: restore old OOM score
 - Use default umask 0022

Misc changes:
 - cli: log parsing errors to stderr
 - Changes to build conmon for riscv64
 - Changes to build conmon for ppc64le
 - Fix close_other_fds on FreeBSD

Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>

adblock-fast: bugfix: remove domains on allow

* fix sed command to properly remove allowed domains from block-file

Signed-off-by: Stan Grishin <stangri@melmac.ca>

Merge pull request #22109 from BKPepe/curl-update

curl: update to version 8.3.0

bandwidthd: drop this package

This package is not maintained by upstream anymore as they replace it by Ntopng 3. [1]
Upstream repository is archived and read only since February 2022 [2]

[1] https://community.nethserver.org/t/bandwidthd-for-nethserver-7/4071/18
[2] https://github.com/NethServer/bandwidthd

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

curl: update to version 8.3.0

Release notes:
https://curl.se/changes.html#8_3_0

Fixes:
CVE-2023-38039 [1]

[1] https://curl.se/docs/CVE-2023-38039.html

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

ovpn-dco: fix package dependencies

We have to add an "IPV6:" in front of the kmod-udptunnel6 to fix
redundant dependencies with the openvpn-* packages.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>

nextdns: Update to version 1.40.1

Signed-off-by: Olivier Poitrey <rs@nextdns.io>

Merge pull request #22104 from douglarek/zt

zerotier: update to 1.12.2

dnscrypt-proxy2: update to version 2.1.5

Fixes compilation with Go 1.21+.

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

syslog-ng: update to version 4.3.1

Makefile changes:
- Since version 4.3.0, there is required to use pcre2 instead of pcre
Reference: https://github.com/syslog-ng/syslog-ng/pull/4537

- Disable c++ support by default to avoid picking libstdcpp dependency
Reference: https://github.com/syslog-ng/syslog-ng/pull/4484

Config changes:
- Bump version in config file

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

zerotier: update to 1.12.2

see changelog: https://github.com/zerotier/ZeroTierOne/releases/tag/1.12.2.

Signed-off-by: Leo Douglas <douglarek@gmail.com>

sing-box: update to 1.4.3

see changelog: https://github.com/SagerNet/sing-box/releases/tag/v1.4.3

Signed-off-by: Leo Douglas <douglarek@gmail.com>

tailscale: set nftables as default

This changes the default firewall method used by Tailscale to nftables.
The 'autodetection' mode is only supported by arm64 and amd64 for now[1].
This causes mips devices to not do proper detection and incorrectly default back to
iptables.

I added a fw_mode variable to the tailscale.conf file that could be
set to iptables for easy conversion for someone still using iptables.
I was able to test on an older mips device and my current aarch64
without issues.

Also a few readme updates to bring it up to the current status.

1. https://github.com/tailscale/tailscale/blob/dc7aa98b768bf82017aa5cc82a62dd4d685f811d/util/linuxfw/linuxfw_unsupported.go#L4C58-L4C58

Signed-off-by: Tyler Young <git@yfh.addy.io>

snort3: update to 3.1.70.0

Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne

   ,,_     -*> Snort++ <*-
  o"  )~   Version 3.1.70.0
   ''''    By Martin Roesch & The Snort Team
           http://snort.org/contact#team
           Copyright (C) 2014-2023 Cisco and/or its affiliates. All rights reserved.
           Copyright (C) 1998-2013 Sourcefire, Inc., et al.
           Using DAQ version 3.0.12
           Using LuaJIT version 2.1.0-beta3
           Using OpenSSL 3.0.10 1 Aug 2023
           Using libpcap version 1.10.4 (with TPACKET_V3)
           Using PCRE version 8.45 2021-06-15
           Using ZLIB version 1.2.13
           Using Hyperscan version 5.4.2 2023-09-07

Signed-off-by: John Audia <therealgraysky@proton.me>

python-setuptools: Update to 68.2.0

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

python-build: Update to 1.0.3

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

Merge pull request #22095 from jefferyto/rust-arch-depends

rust: Move RUST_ARCH_DEPENDS into rust-values.mk

dnsdist: update to 1.8.1

Signed-off-by: Peter van Dijk <peter.van.dijk@powerdns.com>

rust: Move RUST_ARCH_DEPENDS into rust-values.mk

This allows other packages access to RUST_ARCH_DEPENDS by including
rust-values.mk, instead of rust-package.mk which also sets
Build/Compile.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

mwan3: fix mwan3_connected ubus output

During the renameing of mwan3_connected_v4 to mwan3_connected_ipv4 and
mwan3_connected_v6 to mwan3_connected_ipv6 the adjustment in the ubus
call was forgotten. This commit fixes this.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

dawn: Add PKG_BUILD_FLAGS:=no-lto because lto causes strange SegFaults

Signed-off-by: Carsten Schuette <schuettecarsten@googlemail.com>

dawn: Update to 2023-05-14

Signed-off-by: Carsten Schuette <schuettecarsten@googlemail.com>

Merge pull request #22083 from jefferyto/golang-1.21.1

golang: Update to 1.21.1

golang: Update to 1.21.1

Includes fixes for:

* CVE-2023-39318: html/template: improper handling of HTML-like comments
  within script contexts

* CVE-2023-39319: html/template: improper handling of special tags
  within script contexts

* CVE-2023-39320: cmd/go: go.mod toolchain directive allows arbitrary
  execution

* CVE-2023-39321 and CVE-2023-39322: crypto/tls: panic when processing
  partial post-handshake message in QUICConn.HandleData

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

Merge pull request #21935 from G10h4ck/libssh-mbedtls

libssh: compile against MbedTLS instead of OpenSSL

Merge pull request #21958 from graysky2/ncdu

ncdu: update to 1.18.1

Merge pull request #21856 from AuthorReflex/ovpn-2.6.6

openvpn: update to 2.6.6

Merge pull request #22072 from commodo/python-updates1

chardet,numpy,django: bump versions

Merge pull request #22043 from jefferyto/python-crcmod-package-section

python-crcmod: Fix package section

Merge pull request #22067 from robimarko/dbus

dbus: update to 1.14.10 and take ower maintainership

Merge pull request #22030 from BKPepe/retake-packages

treewide: take maintainership from Karel

Merge pull request #22039 from jefferyto/xmltodict-0.13.0

xmltodict: Update to 0.13.0, rename source package

Merge pull request #22038 from jefferyto/ruamel-yaml-0.17.32

ruamel-yaml: Update to 0.17.32, rename source package

Merge pull request #22037 from jefferyto/python-zipp-3.16.2

python-zipp: Update to 3.16.2, update list of dependencies

Merge pull request #22036 from jefferyto/python-zeroconf-0.97.0

python-zeroconf: Update to 0.97.0, update list of dependencies

Merge pull request #22035 from jefferyto/python-yaml-6.0.1

python-yaml: Update to 6.0.1

Merge pull request #22034 from jefferyto/python-build-1.0.0

python-build: Update to 1.0.0

Merge pull request #22041 from jefferyto/python-cryptodomex-3.18.0

python-cryptodomex: Update to 3.18.0, refresh patches

Merge pull request #22040 from jefferyto/python-cryptodome-3.18.0

python-cryptodome: Update to 3.18.0, refresh patches

Merge pull request #22042 from jefferyto/python-pyserial-3.5

python-pyserial: Update to 3.5, update list of dependencies

Merge pull request #22069 from commodo/sudo

sudo: bump to verison 1.9.14p3

django: bump to version 4.2.5

Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>

numpy: bump to version 1.25.2

Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>

python-chardet: bump to 5.2.0

Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>

sudo: bump to verison 1.9.14p3

Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>

unbound: update to 1.18.0

Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>

dbus: take maintainership of the package

Since it seems that this nobody wants to be the maintainer of dbus,
I can take the responsibility.

I am no dbus expert, but can runtime test it and see if change seems
sane.

Signed-off-by: Robert Marko <robimarko@gmail.com>

dbus: update to 1.14.10 stable

Current stable branch for dbus is 1.14 and that is recommended to be used.
1.13 was a development branch and not meant for production use.

1.14.10 is the latest stable, so lets move to it.

Signed-off-by: Robert Marko <robimarko@gmail.com>

dbus: drop CMake patches

CMake is not being used to build dbus as it does not respect endinaness
under CMake and 1.14 branch.

So, lets drop the patches as they will not apply to future 1.14 update.

Signed-off-by: Robert Marko <robimarko@gmail.com>

Merge pull request #22062 from mhei/php8-update-to-8.2.10

php8: update to 8.2.10

pdns: update to 4.8.2

Signed-off-by: Peter van Dijk <peter.van.dijk@powerdns.com>

haproxy: update to v2.8.3

- Update haproxy PKG_VERSION and PKG_HASH
- See changes: http://git.haproxy.org/?p=haproxy-2.8.git;a=shortlog

Signed-off-by: Christian Lachner <gladiac@gmail.com>

python3: Update to 3.11.5, refresh patches

Includes fix for CVE-2023-40217 (Bypass TLS handshake on closed
sockets).

This also:

* Remove 027-install-python3-symlink-after-stdlib.patch

  This was merged upstream in
  https://github.com/python/cpython/pull/104693.

* Remove fix for unnecessary linking with libbsd
  (60bf01cb606344619e002901646171da1e69c0f9)

  This was fixed upstream in
  https://github.com/python/cpython/pull/105236.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

slang2: Remove pcre module

pcre is obsolete and upstream has not yet migrated to pcre2.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

slang2: Avoid building dependencies unless necessary

This also hides the module packages in menuconfig unless the libslang2
package is selected.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>

syncthing: update to 1.24.0

This package can be built with Go 1.21 and QUIC can be enabled.

Signed-off-by: Van Waholtz <brvphoenix@gmail.com>

Merge pull request #20803 from G-M0N3Y-2503/cache-domains-fix

cache-domains: Fixed config files being outside of jail

Merge pull request #22055 from pprindeville/modem-manager-fix-no-mbim-install

modemmanager: handle no *.conf files being installed

modemmanager: handle no *.conf files being installed

To begin with, there are only a couple of .conf files, and
one of them is for testing, and the other is only installed
when MBIM is enabled, so if you build without MBIM you'll
have a failing install:

  install -m0644 /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/ipkg-install/usr/share/ModemManager/*.conf /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/.pkgdir/modemmanager/usr/share/ModemManager
  install: cannot stat '/home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/ipkg-install/usr/share/ModemManager/*.conf': No such file or directory
  make[2]: *** [Makefile:161: /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/.pkgdir/modemmanager.installed] Error 1
  make[2]: Leaving directory '/home/pprindeville/work/openwrt/feeds/packages/net/modemmanager'

So make sure there's anything there to copy over first.

Signed-off-by: Philip Prindeville <pprindeville@netgate.com>

v2ray-geodata: Update to latest version

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

v2raya: Update to 2.2.4

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

libedit: update to version 20230828-3.1

Signed-off-by: Jan Hák <jan.hak@nic.cz>

Merge pull request #21992 from osedl/pr/20230901-modemmanager-fix-permission-denied

modemmanager: Fix Permission Denied error

Merge pull request #21994 from danielpinto8zz6/fix-desec-update-dns

ddns-scripts: desec.io - update url to https

cache-domains: Fixed config files being outside of jail

This fix dnsmasq failing to startup once configured since the
cache-domains config files are not included in the jail that dnsmasq
runs inside.

Signed-off-by: Gerard Ryan <G.M0N3Y.2503@gmail.com>

lua-eco: update to 2.5.1

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>

ddns-scripts: desec.io - update url to https

Signed-off-by: Daniel Pinto <danielpinto8zz6@gmail.com>
desec.io ddns update is not working, after testing the endpoint I got a 301, after a bit of search I found out we are
supposed to use https instead of http
more info here: https://talk.desec.io/t/301-from-update-dedyn-io/644/2

bump PKG_RELEASE

python-crcmod: Fix package section

Signed-off-by: Jeffery To <jeffery.to@gmail.com>