drm/bridge: adv7511: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com

drm/ast: fix mode_valid's return type

The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.

Fix this by using 'enum drm_mode_status' in the driver too.

Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131443.1810-1-luc.vanoostenryck@gmail.com

drm: adv7511: Add support for i2c_new_secondary_device

The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org

dt-bindings: adv7511: Extend bindings to allow specifying slave map addresses

The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Extend the device tree node bindings to be able to override the default
addresses so that address conflicts with other devices on the same bus
may be resolved at the board description level.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-3-git-send-email-kbingham@kernel.org

drm: Don't EXPORT drm_add/reset_display_info

Only used within drm.ko, no need to tempt drivers.

Cc: Keith Packard <keithp@keithp.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424142242.12093-1-daniel.vetter@ffwll.ch

drm/xen-front: use simple display pipe prepare_fb helper

I missed this one because on an older tree.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch

drm/atomic: better doc for implicit vs explicit fencing

Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.

I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.

v2: Comments from Eric.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch

drm/mxsfb: Use simple_display_pipe prepare_fb helper

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-6-daniel.vetter@ffwll.ch

drm/pl111: Use simple_display_pipe prepare_fb helper

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-5-daniel.vetter@ffwll.ch

drm/tve200: Use simple_display_pipe prepare_fb helper

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-4-daniel.vetter@ffwll.ch

drm: Move simple_display_pipe prepare_fb helper into gem fb helpers

There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch

drm/vmwgfx: Remove no-op prepare/cleanup_fb callbacks

Less hits to go through when I git grep over all drivers. These
callbacks are optional.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch

drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 320

The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a
quirk for this.

While at it instead of duplicating the same drm_dmi_panel_orientation_data
for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and
use that for all 3 (including the new Mixx 320 entry).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-2-hdegoede@redhat.com

drm: panel-orientation-quirks: Add quirk for Lenovo Ideapad Mixx 310

Some production batches of the Lenovo Ideapad Mixx 310 laptop use
a portrait LCD panel, add a quirk for this.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-1-hdegoede@redhat.com

drm/rockchip: psr: Remove flush by CRTC

It is not used anymore after last changes and it was not even correct to
begin with as it assumed a 1:1 relation between a CRTC and encoder,
while in fact a CRTC can be attached to multiple encoders.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com

drm/rockchip: Disallow PSR for the whole atomic commit

Currently PSR flush is triggered from CRTC's .atomic_begin() callback,
which is executed after modeset disables and enables and before plane
updates are committed. Since PSR flush and re-enable can be triggered
asynchronously by external sources (input event, delayed work), it can
race with hardware programming done in the aforementioned stages.

This patch blocks the PSR completely before hardware programming part
begins and unblock after it ends. This relies on reference counted PSR
disable introduced with previous patch.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com

drm/rockchip: psr: Sanitize semantics of allow/inhibit API

Currently both rockchip_drm_psr_activate() and _deactivate() only set the
boolean "active" flag without actually making sure that hardware state
complies with it.

Since we are going to extend the usage of this API to properly lock PSR
for the duration of atomic commits, we change the semantics in following
way:
 - a counter is used to track the number of inhibit requests,
 - PSR is actually disabled in hardware on first inhibit request,
 - PSR enable work is scheduled on last allow request.

The above allows using the API as a way to deterministically synchronize
PSR state changes with other DRM events, i.e. atomic commits and cursor
updates. As a nice side effect, the naming is sorted out and we have
"inhibit" for stopping the software logic and "enable" for hardware
state.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com

drm/rockchip: psr: Avoid redundant calls to .set() callback

The first time after we call rockchip_drm_do_flush() after
rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The
difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a
delayed work pending - PSR is off in either state.  However
psr_set_state() only catches the transition from PSR_FLUSH to
PSR_DISABLE (which never happens), while going from PSR_DISABLE to
PSR_FLUSH triggers a call to psr->set() to disable PSR while it's
already disabled. This triggers the eDP PHY power-on sequence without
being shut down first and this seems to occasionally leave the encoder
unable to later enable PSR. Let's just simplify the state machine and
simply consider PSR_DISABLE and PSR_FLUSH the same state.

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com

drm/rockchip: analogix_dp: Do not call Analogix code before bind

Driver callbacks, such as system suspend or resume can be called any
time, specifically they can be called before the component bind
callback. Let's use dp->adp pointer as a safeguard and skip calling
Analogix entry points if it is an ERR_PTR().

Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Split the platform-specific poweron in two parts

Some of the platform-specific stuff in rockchip_dp_poweron() needs to
happen before the generic code.  Some needs to happen after.  Let's
split the callback in two.

Specifically we can't start doing PSR work until _after_ the whole
controller is up, so don't set the enable until the end.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[seanpaul added exynos change]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com

drm/rockchip: pre dither down when output bpc is 8bit

Some encoder have a crc verification check, crc check fail if
input and output data is not equal.

That means encoder input and output need use same color depth,
vop can output 10bit data to encoder, but some panel only support
8bit depth, that would make crc check die.

So pre dither down vop data to 8bit if panel's bpc is 8.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
[seanpaul resolved conflict in rockchip_drm_vop.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Properly disable aux chan retries on rockchip

The comments in analogix_dp_init_aux() claim that we're disabling aux
channel retries, but then right below it for Rockchip it sets them to
3.  If we actually need 3 retries for Rockchip then we could adjust
the comment, but it seems more likely that we want the same retry
behavior across all platforms.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-21-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Properly log AUX CH errors

The code in analogix_dp_transfer() that was supposed to print out:
  AUX CH error happened

Was actually dead code. That's because the previous check (whether
the interrupt status indicated any errors) would have hit for all
errors anyway.

Let's combine the two error checks so we can actually see AUX CH
errors.  We'll also downgrade the message to a warning since some of
these types of errors might be expected for some displays.  If this
gets too noisy we can downgrade again to debug.

Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-20-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Reorder plat_data->power_off to happen sooner

The current user of the analogix power_off is "analogix_dp-rockchip".
That driver does this:
- deactivate PSR
- turn off a clock

Both of these things (especially deactive PSR) should be done before
we turn the PHY power off and turn off analog power.  Let's move the
callback up.

Note that without this patch (and with
https://patchwork.kernel.org/patch/9553349/ [seanpaul: this patch was
not applied, but it seems like the race can still occur]), I experienced
an error in reboot testing where one thread was at:

  rockchip_drm_psr_deactivate
  rockchip_dp_powerdown
  analogix_dp_bridge_disable
  drm_bridge_disable

...and the other thread was at:

  analogix_dp_send_psr_spd
  analogix_dp_enable_psr
  analogix_dp_psr_set
  psr_flush_handler

The flush handler thread was finding AUX channel errors and eventually
reported "Failed to apply PSR", where I had a kgdb breakpoint. Presumably
the device would have eventually given up and shut down anyway, but it
seems better to fix the order to be more correct.

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-19-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Move fast link training detect to set_bridge

It's too early to detect fast link training, if other step after it
failed, we will set fast_link flag to 1, and retry set_bridge again. In
this case we will power down and power up panel power supply, and we
will do fast link training since we have set fast_link flag to 1. In
fact, we should do full link training now, not the fast link training.
So we should move the fast link detection at the end of set_bridge.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-18-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Fix incorrect operations with register ANALOGIX_DP_FUNC_EN_1

Register ANALOGIX_DP_FUNC_EN_1(offset 0x18), Rockchip is different to
Exynos:

on Exynos edp phy,
BIT 7 MASTER_VID_FUNC_EN_N
BIT 6 reserved
BIT 5 SLAVE_VID_FUNC_EN_N

on Rockchip edp phy,
BIT 7 reserved
BIT 6 RK_VID_CAP_FUNC_EN_N
BIT 5 RK_VID_FIFO_FUNC_EN_N

So, we should do some private operations to Rockchip.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-17-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Fix timeout of video streamclk config

The STRM_VALID bit in register ANALOGIX_DP_SYS_CTL_3 may be unstable,
so we may hit the error log "Timeout of video streamclk ok" since
checked this unstable bit.
In fact, we can go continue and the streamclk is ok if we wait enough time,
it does no effect on display.
Let's change this error to warn.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-16-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Don't use ANALOGIX_DP_PLL_CTL to control pll

There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg
list.  We should use BIT_4 in ANALOGIX_DP_PD to control the pll power
instead of ANALOGIX_DP_PLL_CTL.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-15-enric.balletbo@collabora.com

drm/rockchip: Restore psr->state when enable/disable psr failed

If we failed disable psr, it would hang the display until next psr
cycle coming. So we should restore psr->state when it failed.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-14-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Reset aux channel if an error occurred

AUX errors are caused by many different reasons. We may not know what
happened in aux channel on failure, so let's reset aux channel if some
errors occurred.

Cc: 征增 王 <wzz@rock-chips.com>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-13-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchip

There are some different bits between Rockchip and Exynos in register
"AUX_PD". This patch fixes the incorrect operations about it.

Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-12-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Check dpcd write/read status

We need to check the dpcd write/read return value to see whether the
write/read was successful

Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-11-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Fix incorrect usage of enhanced mode

Enhanced mode is required by the eDP 1.2 specification, and not doing it
early could result in a period of time where we have a link transmitting
idle packets without it. Since there is no reason to disable it, we just
enable it at the beginning of link training and then keep it on all the
time.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-10-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Extend hpd check time to 100ms

There was a 1ms delay to detect the hpd signal, which is too short to
detect a short pulse. This patch extends this delay to 100ms.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: 征增 王 <wzz@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-9-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panel

When panel is shut down, we should make sure edp can be disabled to avoid
undefined behavior.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-8-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phy

Following the correct power up sequence:
dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-7-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Wait for HPD signal before configuring link

According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker
must first detect that the HPD signal is asserted high by the Downstream
Device before establishing a link with it.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-6-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Retry bridge enable when it failed

When we enable bridge failed, we have to retry it, otherwise we would get
the abnormal display.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-5-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Don't use fast link training when panel just powered up

Panel would reset its setting when it powers down. It would forget the last
succeeded link training setting. So we can't use the last successful link
training setting to do fast link training. Let's reset fast_train_enable in
analogix_dp_bridge_disable();

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-4-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transfer

We should check AUX_EN bit to confirm the AUX CH operation is completed.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-3-enric.balletbo@collabora.com

drm/bridge: analogix_dp: Move enable video into config_video()

We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.

We needed to increase the delay in the timeout loop because there is
random "Timeout of video streamclk ok" message happen when debug edp
panel, this time do not define in the spec.

Cc: 征增 王 <wzz@rock-chips.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-2-enric.balletbo@collabora.com

drm/vc4: Add CTM registers to debugfs

Now that we set the OLED* registers to do CTM, it's helpful to have them
in the register dump.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420122545.40014-2-stschake@gmail.com

drm/vc4: Add CTM support

The hardware has a single block for applying a CTM prior to gamma lut.
It can be fed with pixels from one of our CRTC at a time and uses a
matrix with S0.9 scalars. Use private atomic state to reject attempts
from userland to apply CTM for more than one CRTC at a time and reject
matrices with scalars that we can't approximate without integer bits.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/218067/

drm/vc4: Add support for plane alpha

The HVS supports mixing fixed alpha with per-pixel alpha or
setting a fixed plane alpha in case there is no per-pixel information.
This allows us to support the generic DRM plane alpha property.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421000954.18936-1-stschake@gmail.com

gpu: drm: vc4: simplify getting .drvdata

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419140641.27926-17-wsa+renesas@sang-engineering.com

dt-bindings: drm/bridge: Document Cadence DSI bridge bindings

Document the bindings used for the Cadence DSI bridge.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-2-boris.brezillon@bootlin.com

drm/bridge: Add Cadence DSI driver

Add a driver for Cadence DPI -> DSI bridge.

This driver only support a subset of Cadence DSI bridge capabilities.

This driver has been tested/debugged in a simulated environment which
explains why some of the features are missing.  Here is a
non-exhaustive list of missing features:
 * burst mode
 * DPHY init/configuration steps
 * support for additional input interfaces (SDI input)

DSI commands and non-burst video mode have been tested.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-1-boris.brezillon@bootlin.com

drm: dw-hdmi-i2s: Remove owner assignment from platform_driver

platform_driver does not need to set the owner field, as this will
be populated by the driver core.

Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521137057-14773-1-git-send-email-festevam@gmail.com

drm: bridge: Add thc63lvd1024 LVDS decoder driver

Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
output converter.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org

dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder

Document Thine THC63LVD1024 LVDS decoder device tree bindings.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-2-git-send-email-jacopo+renesas@jmondi.org
Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-2-git-send-email-jacopo+renesas@jmondi.org

drm/bridge/synopsys: dsi: Adopt SPDX identifiers

Add SPDX identifiers to the Synopsys DesignWare MIPI DSI
host controller driver.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Philippe Ombredanne <pombredanne@nexB.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208145805.24762-1-philippe.cornu@st.com

drm/stm: ltdc: fix warning in ltdc_crtc_update_clut()

Fix the warning
"warn: variable dereferenced before check 'crtc' (see line 390)"
by removing unnecessary checks as ltdc_crtc_update_clut() is
only called from ltdc_crtc_atomic_flush() where crtc and
crtc->state are not NULL.

Many thanks to Dan Carpenter for the bug report
https://lists.freedesktop.org/archives/dri-devel/2018-February/166918.html

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: yannick fertre <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410135312.3553-1-philippe.cornu@st.com

drm/stm: ltdc: add user update info in plane print state

This patch adds the user update information in
frames-per-second into the drm debugfs plane state.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180407213503.30932-1-philippe.cornu@st.com

drm/stm: move enable/disable_vblank to crtc

enable/disable_vblank() functions at drm_driver level
are deprecated. Move them to the ltdc drm_crtc_funcs
structure.

Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180407212937.30407-1-philippe.cornu@st.com

drm/xen-front: Remove CMA support

It turns out this was only needed to paper over a bug in the CMA
helpers, which was addressed in

commit 998fb1a0f478b83492220ff79583bf9ad538bdd8
Author: Liviu Dudau <Liviu.Dudau@arm.com>
Date:   Fri Nov 10 13:33:10 2017 +0000

    drm: gem_cma_helper.c: Allow importing of contiguous scatterlists with nents > 1

Without this the following pipeline didn't work:

domU:
1. xen-front allocates a non-contig buffer
2. creates grants out of it

dom0:
3. converts the grants into a dma-buf. Since they're non-contig, the
scatter-list is huge.
4. imports it into rcar-du, which requires dma-contig memory for
scanout.

-> On this given platform there's an IOMMU, so in theory this should
work. But in practice this failed, because of the huge number of sg
entries, even though the IOMMU driver mapped it all into a dma-contig
range.

With a guest-contig buffer allocated in step 1, this problem doesn't
exist. But there's technically no reason to require guest-contig
memory for xen buffer sharing using grants.

Given all that, the xen-front cma support is not needed and should be
removed.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417074012.21311-1-andr2000@gmail.com

drm/atomic: Add sanity checks to drm_atomic_helper_async_commit()

->atomic_async_update() requires that drivers update the plane->state
object before returning. Make sure at least common properties have been
updated.

Cc: Gustavo Padovan <gustavo@padovan.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330145518.29770-1-boris.brezillon@bootlin.com

drm/vc4: update cursors asynchronously through atomic

Add support for async updates of cursors by using the new atomic
interface for that. Basically what this commit does is do what
vc4_update_plane() did but through atomic.

v7: Place the drm_atomic_set_fb_for_plane() call after the new
    FB has been applied to the HW to avoid possible use-after-free
    issues
v6: add missing drm_atomic_set_fb_for_plane() in
    vc4_plane_atomic_async_update() (Boris Brezillon)
v5: add missing call to vc4_plane_atomic_check() (Eric Anholt)
v4: add drm_atomic_helper_async() commit (Eric Anholt)
v3: move size checks back to drivers (Ville Syrjälä)
v2: move fb setting to core and use new state (Eric Anholt)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180330085445.31726-1-boris.brezillon@bootlin.com

drm/vc4: Move CRTC state to header

We need to access the channel for configuring our CTM hardware.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-4-git-send-email-stschake@gmail.com

drm/vc4: Expose gamma as atomic property

We are an atomic driver so the gamma LUT should also be exposed as a
CRTC property through the DRM atomic color management. This will also
take care of the legacy path for us.

Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-3-git-send-email-stschake@gmail.com

drm/vc4: Add some missing HVS register definitions.

At least the RGBA expand field we should have been setting, because we
aren't expanding correctly for 565 -> 8888.  Other registers are ones
that may be interesting for various projects that have been discussed.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stefan Schake <stschake@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523479755-20812-2-git-send-email-stschake@gmail.com

drm/rockchip: fix VOP vblank race

We have seen a case of a bad reference count for vblanks with the
Rockchip VOP:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 383 at drivers/gpu/drm/drm_irq.c:1198 drm_vblank_put+0x40/0xcc
Modules linked in: brcmfmac brcmutil
CPU: 1 PID: 383 Comm: kworker/u8:2 Not tainted 4.9.75-rt60 #1
Hardware name: Rockchip (Device Tree)
Workqueue: events_unbound flip_worker
Backtrace:
[<c010b7b0>] (dump_backtrace) from [<c010ba4c>] (show_stack+0x18/0x1c)
 r7:c0b1b13c r6:600b0013 r5:00000000 r4:c0b1b13c
[<c010ba34>] (show_stack) from [<c032d248>] (dump_stack+0x78/0x94)
[<c032d1d0>] (dump_stack) from [<c011e6e8>] (__warn+0xe4/0x104)
 r7:00000009 r6:c03cf26c r5:00000000 r4:00000000
[<c011e604>] (__warn) from [<c011e7c0>] (warn_slowpath_null+0x28/0x30)
 r9:eeb443a0 r8:eeb443c8 r7:ee8a5ec0 r6:ee8a5ec0 r5:edb47f00 r4:ee096200
[<c011e798>] (warn_slowpath_null) from [<c03cf26c>] (drm_vblank_put+0x40/0xcc)
[<c03cf22c>] (drm_vblank_put) from [<c03cf310>] (drm_crtc_vblank_put+0x18/0x1c)
 r5:edb47f00 r4:ee3c8a80
[<c03cf2f8>] (drm_crtc_vblank_put) from [<c03ef9b4>] (vop_fb_unref_worker+0x18/0x24)
[<c03ef99c>] (vop_fb_unref_worker) from [<c03df194>] (flip_worker+0x98/0xb4)
 r5:edb47f00 r4:eeb443a8
[<c03df0fc>] (flip_worker) from [<c0134808>] (process_one_work+0x1a8/0x2fc)
 r9:00000000 r8:ee807d00 r7:00000000 r6:ee809c00 r5:eeb443a8 r4:edfe5f80
[<c0134660>] (process_one_work) from [<c01358ec>] (worker_thread+0x2ac/0x458)
 r10:00000088 r9:edfe5f98 r8:ee809c2c r7:c0b04100 r6:ee809c00 r5:ee809c00
 r4:edfe5f80
[<c0135640>] (worker_thread) from [<c013a0bc>] (kthread+0xfc/0x10c)
 r10:00000000 r9:00000000 r8:c0135640 r7:edfe5f80 r6:00000000 r5:edf0e240
 r4:ee8a4000 r3:ed194e00
[<c0139fc0>] (kthread) from [<c0107cb8>] (ret_from_fork+0x14/0x3c)
 r8:00000000 r7:00000000 r6:00000000 r5:c0139fc0 r4:edf0e240
---[ end trace 0000000000000002 ]---

It seems that this is caused by unfortunate timing between
vop_crtc_atomic_flush() and vop_handle_vblank() given the following
ordering:

atomic_flush handle_vblank
------------ -------------

drm_flip_work_queue
set_bit
      if (test_and_clear_bit(...))
      drm_flip_work_commit
drm_vblank_get

This results in vop_fb_unref_worker (called as flip work) decrementing
the vblank refcount before it has been incremented.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Sandy huang <hjc@rock-chips.com>
Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328160351.23763-1-john@metanate.com

drm/docs: Remove the rcar alpha from the csv file

Now that we moved the rcar-du DRM driver has been switched to the generic
alpha property, remove the former property documentation from the
deprecated CSV file.

Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/04be5e2256aa8d33d9521a68a10f0b73a24f8040.1523432341.git-series.maxime.ripard@bootlin.com

drm/sun4i: Add support for plane alpha

Our backend supports a per-plane alpha property. Support it through our new
helper.

Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/13e89f0d2f2b55752a22eb8c4f37f325246a3a9c.1523432341.git-series.maxime.ripard@bootlin.com

drm/rcar-du: Convert to the new generic alpha property

Now that we have support for per-plane alpha in the core, let's use it.

Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a343697b87109cd8d9675ea8bce2e561051a696f.1523432341.git-series.maxime.ripard@bootlin.com

drm/atmel-hclcdc: Convert to the new generic alpha property

Now that we have support for per-plane alpha in the core, let's use it.

Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5e97e2aae129600233e0983b748e4ba51ced239.1523432341.git-series.maxime.ripard@bootlin.com

drm/blend: Add a generic alpha property

Some drivers duplicate the logic to create a property to store a per-plane
alpha.

This is especially useful if we ever want to support extra protocols for
Wayland like:
https://lists.freedesktop.org/archives/wayland-devel/2017-August/034741.html

Let's create a helper in order to move that to the core.

Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e1ce0db78fcfc407e94913c64819e65109d034d.1523432341.git-series.maxime.ripard@bootlin.com

drm/sun4i: Tie the DSI controller in the TCON

The DSI controller needs a particular interface (CPU aka 8080) with some
modifications from the TCON in order to run.

Make sure the TCON is able to provide it when we are using the DSI output.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/129f5928113d2ca865bf5269047c2e4ba6fed5e6.1522835818.git-series.maxime.ripard@bootlin.com

drm/sun4i: Add Allwinner A31 MIPI-DSI controller support

Most of the Allwinner SoCs since the A31 share the same MIPI-DSI
controller.

While that controller is mostly undocumented, the code is out there and has
been cleaned up in order to be integrated into DRM. However, there's still
some dark areas that are a bit unclear about how the block exactly
operates.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com

dt-bindings: display: Add Allwinner MIPI-DSI bindings

The Allwinner SoCs usually come with a DSI encoder. Add a binding for it.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdc5402570199f5c08211f29d9182ea5948d3c40.1522835818.git-series.maxime.ripard@bootlin.com

drm/sun4i: tcon: Add TRI finish interrupt for vblank

The "CPU" (or Intel 8080) interface uses a different interrupt called
TRI_FINISH (most likely TRI being for trigger) to notify the end of frames,
and hence the VBLANK period.

And that interrupt to the possible VBLANK interrupts source.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de6d6ad8959da77ea3a974a31a4c0c8391178748.1522835818.git-series.maxime.ripard@bootlin.com

Merge tag 'mmio-clk-config' of https://git./linux/kernel/git/broonie/regmap into drm-misc-next

regmap: MMIO regmap clock configuration

This patch provides a mechanism for specifying a different clock to be
used with the regmap clock integration.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180226131207.GB6681@sirena.org.uk

drm/sti: Depend on OF rather than selecting it

Commit cc6b741c6f63 ("drm: sti: remove useless fields from vtg
structure") reworked some code inside of this driver and made it select
CONFIG_OF. This results in the entire OF layer being enabled when
building an allmodconfig on ia64. OF on ia64 is completely unsupported
so this isn't a great state of affairs.

The 0day robot noticed a link-time failure on ia64 caused by
using of_node_to_nid() in an otherwise unrelated driver. The
generic fallback for of_node_to_nid() only exists when:

defined(CONFIG_OF) && defined(CONFIG_NUMA) == false

Since CONFIG_NUMA is usually selected for IA64 we get the link failure.
Fix this by making the driver depend on OF rather than selecting it,
odds are that was the original intent.

Link: https://lists.01.org/pipermail/kbuild-all/2018-March/045172.html
Fixes: cc6b741c6f63 ("drm: sti: remove useless fields from vtg structure")
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-ia64@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403053401.30045-1-oohall@gmail.com

MAINTAINERS: Add drm/xen-front maintainer entry

Add myself as drivers/gpu/drm/xen maintainer.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403123238.19294-1-andr2000@gmail.com

drm/xen-front: Add support for Xen PV display frontend

Add support for Xen para-virtualized frontend display driver.
Accompanying backend [1] is implemented as a user-space application
and its helper library [2], capable of running as a Weston client
or DRM master.
Configuration of both backend and frontend is done via
Xen guest domain configuration options [3].

Driver limitations:
 1. Only primary plane without additional properties is supported.
 2. Only one video mode supported which resolution is configured
    via XenStore.
 3. All CRTCs operate at fixed frequency of 60Hz.

1. Implement Xen bus state machine for the frontend driver according to
the state diagram and recovery flow from display para-virtualized
protocol: xen/interface/io/displif.h.

2. Read configuration values from Xen store according
to xen/interface/io/displif.h protocol:
  - read connector(s) configuration
  - read buffer allocation mode (backend/frontend)

3. Handle Xen event channels:
  - create for all configured connectors and publish
    corresponding ring references and event channels in Xen store,
    so backend can connect
  - implement event channels interrupt handlers
  - create and destroy event channels with respect to Xen bus state

4. Implement shared buffer handling according to the
para-virtualized display device protocol at xen/interface/io/displif.h:
  - handle page directories according to displif protocol:
    - allocate and share page directories
    - grant references to the required set of pages for the
      page directory
  - allocate xen balllooned pages via Xen balloon driver
    with alloc_xenballooned_pages/free_xenballooned_pages
  - grant references to the required set of pages for the
    shared buffer itself
  - implement pages map/unmap for the buffers allocated by the
    backend (gnttab_map_refs/gnttab_unmap_refs)

5. Implement kernel modesetiing/connector handling using
DRM simple KMS helper pipeline:

- implement KMS part of the driver with the help of DRM
  simple pipepline helper which is possible due to the fact
  that the para-virtualized driver only supports a single
  (primary) plane:
  - initialize connectors according to XenStore configuration
  - handle frame done events from the backend
  - create and destroy frame buffers and propagate those
    to the backend
  - propagate set/reset mode configuration to the backend on display
    enable/disable callbacks
  - send page flip request to the backend and implement logic for
    reporting backend IO errors on prepare fb callback

- implement virtual connector handling:
  - support only pixel formats suitable for single plane modes
  - make sure the connector is always connected
  - support a single video mode as per para-virtualized driver
    configuration

6. Implement GEM handling depending on driver mode of operation:
depending on the requirements for the para-virtualized environment,
namely requirements dictated by the accompanying DRM/(v)GPU drivers
running in both host and guest environments, number of operating
modes of para-virtualized display driver are supported:
 - display buffers can be allocated by either
   frontend driver or backend
 - display buffers can be allocated to be contiguous
   in memory or not

Note! Frontend driver itself has no dependency on contiguous memory for
its operation.

6.1. Buffers allocated by the frontend driver.

The below modes of operation are configured at compile-time via
frontend driver's kernel configuration.

6.1.1. Front driver configured to use GEM CMA helpers
     This use-case is useful when used with accompanying DRM/vGPU driver
     in guest domain which was designed to only work with contiguous
     buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can
     only import contiguous PRIME buffers, thus requiring frontend driver
     to provide such. In order to implement this mode of operation
     para-virtualized frontend driver can be configured to use
     GEM CMA helpers.

6.1.2. Front driver doesn't use GEM CMA
     If accompanying drivers can cope with non-contiguous memory then, to
     lower pressure on CMA subsystem of the kernel, driver can allocate
     buffers from system memory.

Note! If used with accompanying DRM/(v)GPU drivers this mode of operation
may require IOMMU support on the platform, so accompanying DRM/vGPU
hardware can still reach display buffer memory while importing PRIME
buffers from the frontend driver.

6.2. Buffers allocated by the backend

This mode of operation is run-time configured via guest domain
configuration through XenStore entries.

For systems which do not provide IOMMU support, but having specific
requirements for display buffers it is possible to allocate such buffers
at backend side and share those with the frontend.
For example, if host domain is 1:1 mapped and has DRM/GPU hardware
expecting physically contiguous memory, this allows implementing
zero-copying use-cases.

Note, while using this scenario the following should be considered:
  a) If guest domain dies then pages/grants received from the backend
     cannot be claimed back
  b) Misbehaving guest may send too many requests to the
     backend exhausting its grant references and memory
     (consider this from security POV).

Note! Configuration options 1.1 (contiguous display buffers) and 2
(backend allocated buffers) are not supported at the same time.

7. Handle communication with the backend:
 - send requests and wait for the responses according
   to the displif protocol
 - serialize access to the communication channel
 - time-out used for backend communication is set to 3000 ms
 - manage display buffers shared with the backend

[1] https://github.com/xen-troops/displ_be
[2] https://github.com/xen-troops/libxenbe
[3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com

drm: Reshuffle getfb error returns

Make it a little more clear what's going on inside of getfb, and also
make it easier to add alternate paths to get a handle in future.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323134553.15993-3-daniels@collabora.com

Merge airlied/drm-next into drm-misc-next

Backmerging to pick up a fix from drm-misc-next-fixes.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/i915: Make force_load_detect effective even w/ DMI quirks/hotplug

When doing forced load detection testing we should totally ignore any
hotplug status for the connector. This is mostly relevant for machines
where we already ignore the hotplug status based on the DMI quirks. On
other machines we would currently skip the force load detection tests
on account of the connector already being connected.

v2: Drop the other force_load_detect check since it's useless now (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322174135.5982-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Restore planes after load detection

Actually turn the planes back on after were done with
the load detection.

Fixes: 20bdc112bbe4 ("drm/i915: Disable all planes for load detection, v2.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-23-ville.syrjala@linux.intel.com

drm/zte: Stop consulting plane->crtc

We want to get rid of plane->crtc on atomic drivers. Stop looking at it.

v2: Use old_state->crtc (Maarten)
v3: s/fb/crtc/ in commit message to actually match the patch (Shawn)

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180326121442.32009-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/vmwgfx: Stop consulting plane->fb

We want to get rid of plane->fb on atomic drivers. Stop looking at it.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-13-ville.syrjala@linux.intel.com
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/sti: Stop consulting plane->fb

We want to get rid of plane->fb on atomic drivers. Stop looking at it.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-12-ville.syrjala@linux.intel.com
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Stop consulting plane->fb

We want to get rid of plane->fb on atomic drivers. Stop looking at it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-10-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm: Use plane->state->fb over plane->fb

Stop looking at plane->fb on atomic drivers. Use plane->state->fb
instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-9-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm: Make the fb refcount handover less magic

Instead of assigning the plane->fb pointer and clearing the fb pointer
to hand over the reference, let's just do it by grabbing another
referece for plane->fb and let fb keep its original one.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-8-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm: Adjust whitespace for legibility

Add a bit of whitespace here and there to make the code look a bit
more structured.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-7-ville.syrjala@linux.intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm: Add local 'plane' variable for primary/cursor planes

Make the code a bit more readable by storing the plane pointer in a
local variable rather than having to do crtc->{primary,cursor} all the
time.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-6-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/atomic-helper: WARN if legacy plane fb pointers are bogus when committing duplicated state

drm_atomic_helper_commit_duplicated_state() should only be called
resume/reset/load_detect paths where plane->old_fb should always be
NULL and plane->fb should be equal to the new_plane_state->fb.
Assert that is indeed the case.

Cc: martin.peres@free.fr
Cc: chris@chris-wilson.co.uk
Cc: Dave Airlie <airlied@gmail.com> (v1)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm: Clear crtc->primary->crtc when disabling the crtc via setcrtc()

Keep the primary->crtc in sync with the state->crtc (also with
primary->fb and state->fb) when disabling the crtc (and thus also
the primary) via setcrtc().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/atomic-helper: Drop plane->fb references only for drm_atomic_helper_shutdown()

drm_atomic_helper_shutdown() needs to release the reference held by
plane->fb. Since commit 49d70aeaeca8 ("drm/atomic-helper: Fix leak in
disable_all") we're doing that by calling drm_atomic_clean_old_fb() in
drm_atomic_helper_disable_all(). This also leaves plane->fb == NULL
afterwards. However, since drm_atomic_helper_disable_all() is also
used by the i915 gpu reset code
drm_atomic_helper_commit_duplicated_state() then has to undo the
damage and put the correct plane->fb pointers back in (and also
adjust the ref counts to match again as well).

That approach doesn't work so well for load detection as nothing
sets up the plane->old_fb pointers for us. This causes us to
leak an extra reference for each plane->fb when
drm_atomic_helper_commit_duplicated_state() calls
drm_atomic_clean_old_fb() after load detection.

To fix this let's call drm_atomic_clean_old_fb() only for
drm_atomic_helper_shutdown() as that's the only time we need to
actually drop the plane->fb references. In all the other cases
(load detection, gpu reset) we want to leave plane->fb alone.

v2: Don't inflict the clean_old_fbs bool to drivers (Daniel)
v3: Squash in the revert and rewrite the commit msg (Daniel)

Cc: martin.peres@free.fr
Cc: chris@chris-wilson.co.uk
Cc: Dave Airlie <airlied@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322152313.6561-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #pre-squash
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Use srcu to protect drm_device.unplugged

Use srcu to protect drm_device.unplugged in a race free manner.
Drivers can use drm_dev_enter()/drm_dev_exit() to protect and mark
sections preventing access to device resources that are not available
after the device is gone.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Tested-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1522222715-11814-1-git-send-email-andr2000@gmail.com

Merge branch 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

- Mask mode type garbage from userspace (Ville)

Something went wrong on the misc tree side, but I'll pull the patch directly.

* 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix uabi regression by allowing garbage mode->type from userspace

drm: add parameter explanation for some gem dmabuf_ops

To reduce some warnings.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1522092145-12645-1-git-send-email-Samuel.Li@amd.com

drm/tinydrm: Make fb_dirty into a lower level hook

mipi_dbi_enable_flush() wants to call the fb->dirty() hook from the
bowels of the .atomic_enable() hook. That prevents us from taking the
plane mutex in fb->dirty() unless we also plumb down the acquire
context.

Instead it seems simpler to split the fb->dirty() into a tinydrm
specific lower level hook that can be called from
mipi_dbi_enable_flush() and from a generic higher level
tinydrm_fb_dirty() helper. As we don't have a tinydrm specific
vfuncs table we'll just stick it into tinydrm_device directly
for now.

v2: Deal with the fb->dirty() in tinydrm_display_pipe_update() as well (Noralf)

Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323153509.15287-1-ville.syrjala@linux.intel.com
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>

drm/simple-kms-helper: Plumb plane state to the enable hook

tinydrm enable hook wants to play around with the new fb in
.atomic_enable(), thus we'll need access to the plane state.

Performed with coccinelle:
@r1@
identifier F =~ ".*enable$";
identifier P, CS;
@@
F(
struct drm_simple_display_pipe *P
,struct drm_crtc_state *CS
+ ,struct drm_plane_state *plane_state
)
{
...
}

@@
struct drm_simple_display_pipe *P;
expression E;
@@
{
+ struct drm_plane *plane;
...
+ plane = &P->plane;
P->funcs->enable(P
,E
+ ,plane->state
);
...
}

@@
identifier P, CS;
@@
struct drm_simple_display_pipe_funcs {
...
        void (*enable)(struct drm_simple_display_pipe *P
      ,struct drm_crtc_state *CS
+ ,struct drm_plane_state *plane_state
);
...
};

v2: Pimp the commit message (David)

Cc: Marek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322202738.25817-1-ville.syrjala@linux.intel.com
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>

drm/udl: Get rid of dev->struct_mutex usage

It's only used to protect our page list, and only when we know we have
a full reference. This means none of these code paths can ever race
with the final unref, and hence we do not need dev->struct_mutex
serialization and can simply switch to our own locking.

For more context the only magic the locked gem_free_object provides is
that it prevents concurrent final unref (and destruction) of gem
objects while anyone is holding dev->struct_mutex. This was used by
i915 (and other drivers) to implement eviction handling with less
headaches.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-3-daniel.vetter@ffwll.ch

drm/rockchip: fixup comment for gem_free_object_unlocked

Just want to clean out all grep hits. gem_free_object is deprecated.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-2-daniel.vetter@ffwll.ch

staging/vboxvideo: Use gem_free_object_unlocked

vboxvideo doesn't use dev->struct_mutex and therefore has no need to use
gem_free_object.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Michael Thayer <michael.thayer@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-1-daniel.vetter@ffwll.ch

drm/omap: Use normalized zpos for plane placement

Planes with identical zpos value will result undefined behavior:
disappearing planes, screen flickering and it is not supported by the
hardware.

Use normalized zpos to make sure that we don't encounter invalid
configuration.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-7-peter.ujfalusi@ti.com

drm: rcar-du: Let core take care of normalizing the zpos

Set the drm_mode_config->normalize_zpos and call drm_atomic_helper_check()
from rcar_du_atomic_check() instead of re implementing the function locally.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-6-peter.ujfalusi@ti.com

drm/sti: Let core take care of normalizing the zpos

Instead of re-implementing the drm_atomic_helper_check() locally with just
adding drm_atomic_normalize_zpos() into it, set the
drm_mode_config->normalize_zpos.

Note: the drm_atomic_helper_check() now includes

if (state->legacy_cursor_update)
state->async_update = !drm_atomic_helper_async_check(drm, state);

which was added after the driver moved away from using it
(38d868e41c4b9250d5a115c049dc2d48f4909581 drm: Don't force all planes to
be added to the state due to zpos)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
CC: Benjamin Gaignard <benjamin.gaignard@linaro.org>
CC: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-5-peter.ujfalusi@ti.com