Steven Barth [Fri, 10 Apr 2015 11:33:15 +0000 (11:33 +0000)]
odhcp6c: move IPv6 /proc config to userspace and sanitize
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45358
Jonas Gorski [Fri, 10 Apr 2015 10:30:00 +0000 (10:30 +0000)]
kernel: fix kmod-ieee802154_6lowpan config symbol
Fixes build failure caught by buildbot:
IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support (IEEE802154) [M/n/y/?] m
6lowpan support over IEEE 802.15.4 (IEEE802154_6LOWPAN) [N/m/?] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
make[6]: *** [silentoldconfig] Error 1
make[5]: *** [silentoldconfig] Error 2
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45357
Jonas Gorski [Fri, 10 Apr 2015 10:29:04 +0000 (10:29 +0000)]
b53: clean up code to match kernel style better
* properly enclose macro arguments in paranthesis on use
* remove trailing white space
* convert C99 // comments
* add missing blank lines after declaration
* remove braces from single statement blocks
* split lines > 80 chars (except for one)
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45356
Jonas Gorski [Fri, 10 Apr 2015 10:28:46 +0000 (10:28 +0000)]
b53: define registers available and needed on BCM5301X
They are also present on some BCM63xx switches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45355
Steven Barth [Fri, 10 Apr 2015 10:19:17 +0000 (10:19 +0000)]
dnsmasq: bump to 2.73rc4
Fix crash caused by malformed DNS requests
Improved DNSSEC handling
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45354
Rafał Miłecki [Fri, 10 Apr 2015 09:58:00 +0000 (09:58 +0000)]
bcm53xx: build image for ASUS RT-AC56U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45353
Rafał Miłecki [Fri, 10 Apr 2015 09:42:48 +0000 (09:42 +0000)]
bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45352
John Crispin [Fri, 10 Apr 2015 08:31:26 +0000 (08:31 +0000)]
hostapd: remove unused asprintf parameter
r45270 removed ieee80211n=%d from the format string but didn't remove
the parameter itself. Though this probably doesn't cause any harm, it's
quite confusing and unneeded.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45351
John Crispin [Fri, 10 Apr 2015 08:31:06 +0000 (08:31 +0000)]
iptables: revert r40916
it causes problems with newer iptables when ipv6 is disabled as iptc uncoditionally links ip6tc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45350
John Crispin [Fri, 10 Apr 2015 08:30:11 +0000 (08:30 +0000)]
wpan-tools: adds wpan-tools utility
This patch adds the wpan-tools (iwpan) utility to OpenWRT
build system. This utility required to manage IEE-802.15.4
devices.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45349
John Crispin [Fri, 10 Apr 2015 08:29:35 +0000 (08:29 +0000)]
kernel: adds wpan related packages
This patch adds the IEEE-802.15.4 and 6LoWPAN related
packages.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45348
John Crispin [Fri, 10 Apr 2015 08:29:26 +0000 (08:29 +0000)]
sunxi: don't enable ARMTHUMB XZ BCJ filter in kernel
Having CONFIG_XZ_DEC_ARMTHUMB enabled breaks squashfs when ARM BCJ
filter was used to create the filesystem (and that's what we do on
all ARM targets). Thus unset CONFIG_XZ_DEC_ARMTHUMB to fix
squashfs on sunxi.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45347
John Crispin [Fri, 10 Apr 2015 08:29:05 +0000 (08:29 +0000)]
qca-nss-gmac: update to latest version
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45346
John Crispin [Fri, 10 Apr 2015 08:28:44 +0000 (08:28 +0000)]
ipq806x: automatically select kmod-usb-phy-qcom-dwc3
kmod-usb-phy-qcom-dwc3 is required to get USB working on ipq806x. It was
missed in previous commit so let's enable it automatically.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45345
John Crispin [Fri, 10 Apr 2015 08:28:21 +0000 (08:28 +0000)]
procd: fix compile error on x86_64
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45344
John Crispin [Fri, 10 Apr 2015 08:27:55 +0000 (08:27 +0000)]
openssl: disable arm optimisation until we know why it fails on some socs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45343
John Crispin [Fri, 10 Apr 2015 08:27:44 +0000 (08:27 +0000)]
ralink: fix cevt-r4k hack
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45342
John Crispin [Fri, 10 Apr 2015 08:27:27 +0000 (08:27 +0000)]
fstools: update to latest git HEAD
this fixes extroot on mvebu
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45341
Felix Fietkau [Thu, 9 Apr 2015 14:57:25 +0000 (14:57 +0000)]
uci: update to the latest version, fixes a regression in handling empty/comment lines in uci batch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45340
John Crispin [Thu, 9 Apr 2015 14:33:11 +0000 (14:33 +0000)]
procd: add helper for starting NAND sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45339
John Crispin [Thu, 9 Apr 2015 14:33:03 +0000 (14:33 +0000)]
base-files: add support for platform_pre_upgrade function
Current NAND sysupgrade process is a bit hard to follow due to the way
of triggering stage1. Currently this is done by leaving a /mark/ in the
form of /tmp/sysupgrade-nand-path during nand_do_platform_check.
Existence of this mark stops standard sysupgrade process (as the result
of sysupgrade_pre_upgrade exit). This may be a bit misleading.
Proposed solution adds a new function that will allow platform.sh
trigger NAND sysupgrade consciously. This will also allow cleaning
nand_do_platform_check limiting it to just checking the image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45338
John Crispin [Thu, 9 Apr 2015 10:33:26 +0000 (10:33 +0000)]
modules: remove zd1201 package
it needs to be moved to compat-wireless
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45337
John Crispin [Thu, 9 Apr 2015 10:33:16 +0000 (10:33 +0000)]
kernel: add rtl8723au driver (staging)
- move config symbol to separate package (Why was it there in the first place?)
- 8723au might be used in some USB sticks or on some sunxi boards
compile tested only
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45336
John Crispin [Thu, 9 Apr 2015 10:33:11 +0000 (10:33 +0000)]
generic/3.18: add missing wireless symbols
triggered by enabling RFKILL in global build options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45335
John Crispin [Thu, 9 Apr 2015 10:33:05 +0000 (10:33 +0000)]
netifd: Interface last error support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45334
John Crispin [Thu, 9 Apr 2015 10:32:54 +0000 (10:32 +0000)]
ppp: Detailed last error support
Enables last error support for the PPP protocol handlers.
In generic teardown the PPP daemon exit code is translated into
a self explaining error string which is set as interface error
by proto_notify_error in case of failure.
Signed-off-by: Johan Peeters <johan.peeters111@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45333
John Crispin [Thu, 9 Apr 2015 10:32:46 +0000 (10:32 +0000)]
dnsmasq: Add option '--servers-file'
The option '--servers-file' is available since dnsmasq v2.69.
Signed-off-by: Lars Kruse <lists@sumpfralle.de>
SVN-Revision: 45332
John Crispin [Thu, 9 Apr 2015 10:32:37 +0000 (10:32 +0000)]
ramips: Add support for Microduino MicroWRT
MicroWRT is an wireless router with 2 USB,1 ethernet port. It
has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
combine with the core board. The detailed information, please refer to
https://www.microduino.cc/wiki/index.php?title=Main_Page
This patch adds support for it.
Because there is only one port,so disabled VLAN and use eth0 as lan
port. and only a power LED control by power pin.
Signed-off-by: 盛凯 <shengkai81@gmail.com>
SVN-Revision: 45331
John Crispin [Thu, 9 Apr 2015 10:32:26 +0000 (10:32 +0000)]
docs: Fix typo buysbox -> busybox.
Signed-off-by: Catalin Patulea <catalinp@google.com>
SVN-Revision: 45330
John Crispin [Thu, 9 Apr 2015 10:32:18 +0000 (10:32 +0000)]
ubox: add log_trailer_null option to uci
this allow us to use syslog tcp with \0 trailer
instead of \n trailer (logread -0 option)
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 45329
John Crispin [Thu, 9 Apr 2015 10:32:08 +0000 (10:32 +0000)]
ar71xx: enable LEDs on Hornet-UB X2
None of the LEDs are enabled by default on the Hornet-UB X2 board
(the 16/64MB version of the Hornet-UB), because it uses a different
board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards
are equivalent WRT their LEDs.
SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com>
SVN-Revision: 45328
John Crispin [Thu, 9 Apr 2015 10:32:01 +0000 (10:32 +0000)]
umbim: update to latest git HEAD
merge patches from Bjørn Mork
http://patchwork.ozlabs.org/patch/459277/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45327
John Crispin [Thu, 9 Apr 2015 10:31:56 +0000 (10:31 +0000)]
mac80211: add start_disabled option
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45326
John Crispin [Thu, 9 Apr 2015 10:31:45 +0000 (10:31 +0000)]
hostapd: add update_beacon to ubus binding
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45325
Zoltan Herpai [Thu, 9 Apr 2015 10:28:59 +0000 (10:28 +0000)]
generic: add a few missing symbols for 4.0
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45324
Steven Barth [Thu, 9 Apr 2015 08:17:32 +0000 (08:17 +0000)]
odhcp6c: add 464xlat integration, fix dslite integration
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45323
Steven Barth [Thu, 9 Apr 2015 08:17:23 +0000 (08:17 +0000)]
ds-lite: add support for fqdn peeraddrs
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45322
Felix Fietkau [Thu, 9 Apr 2015 08:02:33 +0000 (08:02 +0000)]
busybox: fix regression in handling non-existant find path arguments (#19439)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45321
Rafał Miłecki [Thu, 9 Apr 2015 06:33:56 +0000 (06:33 +0000)]
bcm53xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45320
Rafał Miłecki [Thu, 9 Apr 2015 05:40:37 +0000 (05:40 +0000)]
brcm47xx: image: use "-" separator for device version
This makes legacy subtarget follow two other.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45319
Rafał Miłecki [Thu, 9 Apr 2015 05:36:16 +0000 (05:36 +0000)]
brcm47xx: verify also standard TRX images during sysupgrade
It allows detecting data corruption for plain TRX as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45318
Rafał Miłecki [Thu, 9 Apr 2015 05:22:10 +0000 (05:22 +0000)]
brcm47xx: fix WRT300N devices magics for sysupgrade check
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45317
Rafał Miłecki [Thu, 9 Apr 2015 05:22:04 +0000 (05:22 +0000)]
brcm47xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45316
Rafał Miłecki [Thu, 9 Apr 2015 05:21:55 +0000 (05:21 +0000)]
otrx: new package with tiny app verifying TRX images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45315
Gabor Juhos [Wed, 8 Apr 2015 16:21:04 +0000 (16:21 +0000)]
kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patches
Those don't exist anymore.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45314
Rafał Miłecki [Wed, 8 Apr 2015 09:50:57 +0000 (09:50 +0000)]
brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45313
Felix Fietkau [Wed, 8 Apr 2015 09:26:10 +0000 (09:26 +0000)]
image.mk: rework FILESYSTEM evaluation order to fix some build issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45312
Rafał Miłecki [Wed, 8 Apr 2015 09:22:02 +0000 (09:22 +0000)]
bcm53xx: replace few BCM5301X patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45311
Rafał Miłecki [Wed, 8 Apr 2015 05:55:32 +0000 (05:55 +0000)]
brcm47xx: update legacy subtarget description
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45310
Rafał Miłecki [Wed, 8 Apr 2015 05:55:28 +0000 (05:55 +0000)]
mac80211: make b43 N-PHY default for brcm47xx legacy subtarget
Subtarget legacy is supposed to support all ssb SoC except for BCM4705.
There are few BCM4703 devices with 802.11n supprt (WRT160N v1.0, v1.1).
Few BCM4704 devices with 802.11n: ASUS WL-500W, Linksys WRT150N v1.0 &
v1.1, Linksys WRT300N v1.0, Netgear WNDR3300 v1, WNR834B v1 & v2.
It seems we have to enable N-PHY for legacy as well to support above.
Unfortunately it increases root.squashfs size by 48 460 B.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45309
Rafał Miłecki [Wed, 8 Apr 2015 05:09:42 +0000 (05:09 +0000)]
brcm47xx: add fix "Data bus error" on CardBus ssb SoCs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45308
Rafał Miłecki [Wed, 8 Apr 2015 04:46:27 +0000 (04:46 +0000)]
brcm47xx: reverse 2 LEDs polarity on WRT320N v1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45307
Rafał Miłecki [Tue, 7 Apr 2015 22:06:17 +0000 (22:06 +0000)]
kernel: backport ssb patches up to changes queued for 4.1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45306
Imre Kaloz [Tue, 7 Apr 2015 21:34:38 +0000 (21:34 +0000)]
generic/4.0: upgrade to 4.0-rc7
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45305
Rafał Miłecki [Tue, 7 Apr 2015 21:31:36 +0000 (21:31 +0000)]
brcm47xx: define rest of LEDs & buttons for WRT320N
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45304
Imre Kaloz [Tue, 7 Apr 2015 21:29:26 +0000 (21:29 +0000)]
generic/3.18: upgrade to 3.18.11
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45303
Imre Kaloz [Tue, 7 Apr 2015 21:13:44 +0000 (21:13 +0000)]
mvebu: disable cpu idle on a38x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45302
Imre Kaloz [Tue, 7 Apr 2015 21:11:37 +0000 (21:11 +0000)]
mwlwifi: upgrade to the latest revision
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45301
Gabor Juhos [Tue, 7 Apr 2015 20:04:14 +0000 (20:04 +0000)]
ar71xx: add user-space support for RB911G-5HPacD
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45300
Gabor Juhos [Tue, 7 Apr 2015 20:04:03 +0000 (20:04 +0000)]
ar71xx: add initial support for RB911G-5HPacD
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45299
Gabor Juhos [Tue, 7 Apr 2015 20:03:43 +0000 (20:03 +0000)]
ar71xx: routerboot: export extended wlan data via sysfs
Export the data to make it accessible from user-space.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45298
Gabor Juhos [Tue, 7 Apr 2015 20:03:35 +0000 (20:03 +0000)]
ar71xx: routerboot: add support for extended radio data
On newer Mikrotik boards, the radio calibration data
is stored differently and uses LZO compression instead
of RLE.
Update the RouterBOOT helper code to support the new
format.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45297
Gabor Juhos [Tue, 7 Apr 2015 20:03:24 +0000 (20:03 +0000)]
ar71xx: select RLE_DECOMPRESS directly by the RouterBOOT helper code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45296
Gabor Juhos [Tue, 7 Apr 2015 20:03:15 +0000 (20:03 +0000)]
kernel: add support for the MX25L512E and SI25CD512 SPI flash chips
These are used on some MikroTik boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45295
Imre Kaloz [Tue, 7 Apr 2015 18:13:51 +0000 (18:13 +0000)]
Upstream commits
43b68879de27b1993518687fbc6013da80cdcbfe and
ce6031c89a35cffd5a5992b08377b77f49a004b9 improve the cpuidle driver on Armada XP. The latter commit improves performance at the slight expense of power consumption.
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45294
Rafał Miłecki [Tue, 7 Apr 2015 15:40:51 +0000 (15:40 +0000)]
brcm47xx: drop old patch disabling cardbus mode on Netgear WNR834B
First of all this patch was affecting other devices, not just Netgear
WNR834B. E.g. Linksys WRT300N v1 also has boardtype 0x0472.
This was breaking PCI on WRT300N, ssb couldn't detect core working in
hostmode (due to mips_busprobe32 failing).
Secondly this patch should not be needed for years now. From the analyze
of #8861 it seems it was needed just to make devices at slots other than
0 discoverable. Setting cardbus to 0 was simply making ssb allow access
to PCI config for devices other than bridge.
With the upstream commit
a6c8462 (ssb: fix cardbus slot in hostmode) we
allow accessing device at slot 1 which should be enough for CardBus.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45293
Rafał Miłecki [Tue, 7 Apr 2015 14:14:08 +0000 (14:14 +0000)]
bcm53xx: image: share function checking TRX in provided firmware
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45292
Rafał Miłecki [Tue, 7 Apr 2015 14:14:02 +0000 (14:14 +0000)]
bcm53xx: display all errors (not just the 1st one) when checking image
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45291
Rafał Miłecki [Tue, 7 Apr 2015 14:13:56 +0000 (14:13 +0000)]
bcm53xx: compare provided firmware magic with device magic
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45290
Rafał Miłecki [Tue, 7 Apr 2015 13:08:17 +0000 (13:08 +0000)]
brcm47xx: detect Linksys WRT320N v1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45289
Rafał Miłecki [Tue, 7 Apr 2015 12:54:23 +0000 (12:54 +0000)]
brcm47xx: backport MIPS BCM47XX patches queued for 4.1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45288
Rafał Miłecki [Tue, 7 Apr 2015 11:54:18 +0000 (11:54 +0000)]
brcm47xx: group MIPS BCM47XX backported patches by source kernel
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45287
Felix Fietkau [Mon, 6 Apr 2015 19:39:51 +0000 (19:39 +0000)]
build: add integration for managing opkg package feed keys
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45286
Felix Fietkau [Mon, 6 Apr 2015 19:39:22 +0000 (19:39 +0000)]
opkg: add patch to circumvent signature checks on the command line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45285
Felix Fietkau [Mon, 6 Apr 2015 19:38:37 +0000 (19:38 +0000)]
opkg: add patch for supporting signature checking through usign
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45284
Felix Fietkau [Mon, 6 Apr 2015 19:38:07 +0000 (19:38 +0000)]
usign: add new package for generating/verifying verification (similar to signify)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45283
Felix Fietkau [Mon, 6 Apr 2015 19:37:42 +0000 (19:37 +0000)]
cmake.mk: add host build support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45282
Felix Fietkau [Mon, 6 Apr 2015 19:26:30 +0000 (19:26 +0000)]
ar71xx: fix new mktplinkfw image code - flags for sysupgrade vs factory were swapped (fixes #19400)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45281
Felix Fietkau [Mon, 6 Apr 2015 18:44:28 +0000 (18:44 +0000)]
oprofile: add dependency on librt, it seems to be needed in some configurations
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45280
Steven Barth [Mon, 6 Apr 2015 10:50:54 +0000 (10:50 +0000)]
odhcpd: fix infinite lifetime handling in dhcpv6
thanks to Arjen de Korte
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45279
Felix Fietkau [Mon, 6 Apr 2015 10:07:43 +0000 (10:07 +0000)]
x86: set ARCH_PACKAGES for the x86_64 subtarget (fixes #19425)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45278
John Crispin [Sun, 5 Apr 2015 07:53:32 +0000 (07:53 +0000)]
ipq806x: another missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45277
John Crispin [Sun, 5 Apr 2015 07:40:38 +0000 (07:40 +0000)]
kernel: CONFIG_BRIDGE should not be overridden
this breaks ebtables, netfilter, ... during fullbuilds
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45276
Florian Fainelli [Sat, 4 Apr 2015 19:33:32 +0000 (19:33 +0000)]
arm64: remove CGROUPS override
SCHED_AUTOGROUP was turned on by default which forces the use of
CGROUPS, conflicting with the options we offer from menuconfig, remove
that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45275
Florian Fainelli [Sat, 4 Apr 2015 18:01:26 +0000 (18:01 +0000)]
mcs814x: switch to 3.18 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45274
Florian Fainelli [Sat, 4 Apr 2015 18:01:07 +0000 (18:01 +0000)]
mcs814x: add support for 3.18
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45273
Felix Fietkau [Sat, 4 Apr 2015 17:52:02 +0000 (17:52 +0000)]
busybox: update to version 1.23.2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45272
Felix Fietkau [Sat, 4 Apr 2015 17:51:53 +0000 (17:51 +0000)]
mac80211: get rid of tx power related log spam
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45271
Felix Fietkau [Sat, 4 Apr 2015 17:51:46 +0000 (17:51 +0000)]
hostapd: when running AP+STA, preserve the AP 802.11n-enabled setting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45270
John Crispin [Sat, 4 Apr 2015 06:10:03 +0000 (06:10 +0000)]
kernel: switch to upstream
This driver is upstream since 2012 (commit:
a8e510f682f), so switch to
it and remove own sources. Also place it under "Network Devices" menu
together with other phy drivers.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 45269
John Crispin [Sat, 4 Apr 2015 05:20:34 +0000 (05:20 +0000)]
kernel: fix dwc3 symbols
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45268
John Crispin [Fri, 3 Apr 2015 20:41:50 +0000 (20:41 +0000)]
xburst: mark the asoc modules as BROKEN until the upstream fixes get merged
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45267
Felix Fietkau [Fri, 3 Apr 2015 19:42:38 +0000 (19:42 +0000)]
tools: build ccache when building the sdk (fixes #13949)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45266
Felix Fietkau [Fri, 3 Apr 2015 19:42:33 +0000 (19:42 +0000)]
mac80211: update the software queue patch to the version accepted upstream
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45265
John Crispin [Fri, 3 Apr 2015 19:06:56 +0000 (19:06 +0000)]
ppp: Fix missing arg argument when using option flag OPT_A2STRVAL
The arg argument is missing to the printer call in the print_option
utility when the option flag OPT_A2STRVAL is set.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45264
John Crispin [Fri, 3 Apr 2015 19:06:45 +0000 (19:06 +0000)]
ppp: Fix seg fault when using pppol2tp
PPPD crashes (SEGV) when the dump or dryrun options are specified and an option
is internally defined as "o_special" with an option flag of "OPT_A2STRVAL".
As the option value is not saved when the parameter is processed, a reference
to the option will result into a crash (e.g. when printing).
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45263
John Crispin [Fri, 3 Apr 2015 19:06:38 +0000 (19:06 +0000)]
ipq806x: enable usb3 packages in default profile
Default profile already enables usb2 so we'll do the same for usb3 now
that we have support for it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45262
John Crispin [Fri, 3 Apr 2015 19:06:30 +0000 (19:06 +0000)]
ipq806x: add platform usb support
This change adds DWC3 QCOM USB phys and TCSR drivers. These are
cherry-picked from the following LKML threads:
*dwc3 qcom: https://lkml.org/lkml/2014/9/12/599
*tcsr: https://lkml.org/lkml/2015/2/9/579
We're also adding an additional patch to add the corresponding dev nodes
in the IPQ806x and AP148 dts files.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45261
John Crispin [Fri, 3 Apr 2015 19:06:21 +0000 (19:06 +0000)]
kernel: add package for dwc3 usb driver used on ipq806x
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45260
John Crispin [Fri, 3 Apr 2015 19:06:11 +0000 (19:06 +0000)]
ipq806x: enable usb support
This change doesn't make USB functional but it does make it selectable
from a configuration perspective.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45259
projects / openwrt / staging / neocturne.git / log