Kumar Gala [Thu, 17 Jan 2008 07:01:09 +0000 (01:01 -0600)]
85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 06:52:29 +0000 (00:52 -0600)]
85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 06:32:17 +0000 (00:32 -0600)]
85xx: Convert ATUM8548 to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 05:11:57 +0000 (23:11 -0600)]
85xx: Convert MPC8544 DS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 04:38:34 +0000 (22:38 -0600)]
85xx: Reworked initial processor init
Reworked the initial processor initialzation sequence:
* introduced cpu_early_init_f that is run in address space 1 (AS=1)
* Moved TLB/LAW and CCSR init into cpu_early_init_f()
* Reworked initial asm code to do most of the core init before TLBs
The main reasons for these changes are to allow handling of 36-bit phys
addresses in the future and some of the issues that will exist when we
do that.
There are a few caveats on what can be initialized via the LAW and TLB
static tables:
* TLB entry 14/15 can't be initialized via the TLB table
* any LAW that covers the implicit boot window (4G-8M to 4G) must map to
the code that is currently executing.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 04:33:22 +0000 (22:33 -0600)]
85xx: Introduce new tlb API
Add a set of functions to manipulate TLB entries:
* set_tlb() - write a tlb entry
* invalidate_tlb() - invalidate a tlb array
* disable_tlb() - disable a variable size tlb entry
* init_tlbs() - setup initial tlbs based on static table
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 16:04:42 +0000 (10:04 -0600)]
85xx: Use proper defines for PCI addresses
We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
be used for configuring the PCI ATMU.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:22:29 +0000 (09:22 -0600)]
85xx: Remove old style of LAW init
All boards are now using the new fsl_law code so we can drop the old version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:15:29 +0000 (09:15 -0600)]
85xx: convert remaining 85xx boards over to use new LAW init code
Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
to use new LAW init code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:11:53 +0000 (09:11 -0600)]
85xx: convert STXGP3/STXSSA over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:06:48 +0000 (09:06 -0600)]
85xx: convert PM854/PM856 over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:05:27 +0000 (09:05 -0600)]
85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:45:10 +0000 (01:45 -0600)]
85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:32:06 +0000 (01:32 -0600)]
85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:16:16 +0000 (01:16 -0600)]
85xx: convert MPC8544 DS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:13:58 +0000 (01:13 -0600)]
85xx: Move LAW init code into C
Move the initialization of the LAWs into C code and provide an API
to allow modification of LAWs after init.
Board code is responsible to provide a law_table and num_law_entries.
We should be able to use the same code on 86xx as well.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Wed, 16 Jan 2008 21:06:51 +0000 (22:06 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Kim Phillips [Wed, 16 Jan 2008 06:38:05 +0000 (00:38 -0600)]
Add support for the MPC837xERDB
MPC837xERDB board support includes:
* DDR2 330MHz hardcoded (soldered on the board)
* Local Bus NOR Flash
* I2C, UART and RTC
* eTSEC RGMII (TSEC0 - RTL8211B with MII;
* TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
* load)
Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Wed, 16 Jan 2008 18:06:16 +0000 (12:06 -0600)]
mpc83xx: add support for more system clock performance controls
System registers that are modified are the Arbiter Configuration
Register (ACR), the System Priority Control Register (SPCR), and the
System Clock Configuration Register (SCCR).
Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
James Yang [Wed, 16 Jan 2008 17:58:08 +0000 (11:58 -0600)]
FSL: Generalize PIXIS reset command parsing.
Before, the order of arguments to the pixis_reset
command needed to be supplied in a hard-coded order.
Generalize the command parsing to allow any order.
Signed-off-by: James Yang <james.yang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Jon Loeliger [Tue, 15 Jan 2008 19:42:41 +0000 (13:42 -0600)]
FSL: Convert board/freescale/common/Makefile to use CONFIG_
Convert the board/freescale/common/Makefile to use
CONFIG_* options to select which files to conditionally
compile into the board/freescale/common library rather
than conditionally compiling entire files.
Now handles::
CONFIG_FSL_PIXIS
CONFIG_FSL_DIU_FB
CONFIG_PQ_MDS_PIB
CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Roy Zang [Tue, 15 Jan 2008 08:38:38 +0000 (16:38 +0800)]
Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
Remove unused ethernet CONFIG_ options.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Kim Phillips [Tue, 15 Jan 2008 20:05:14 +0000 (14:05 -0600)]
mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
continuation of commit
b96c83d4ae475a70ef2635cd0e748174c44c8601
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Tue, 15 Jan 2008 15:51:12 +0000 (09:51 -0600)]
mpc83xx: clean up mpc8360emds.c warnings
mpc8360emds.c: In function 'ft_board_setup':
mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Mon, 14 Jan 2008 22:14:46 +0000 (16:14 -0600)]
mpc83xx: fix phy-connection-type fixup code
use tree passed to us in local blob, not global fdt.
Also use fdt_path_offset to convert to relative offset, since absolute
reference is needed to check for rgmii-id mode string value.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kumar Gala [Mon, 14 Jan 2008 15:01:40 +0000 (09:01 -0600)]
mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Poonam Aggrwal [Mon, 14 Jan 2008 04:11:14 +0000 (09:41 +0530)]
Changes in uboot DDR configuration for MPC8313eRDB
These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
DDR configuration in u-boot code. Some are related to performance, some
affect stability and some correct few basic errors in the current
configuration.
The changes have been tested and found to give better memory latency
figures on MPC8313eRDB.LMBench figures prove it.
The changes are:
- CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
(this may improve performance for application with many read
or write to open pages).
- CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
001 (activating all the CS when only one is used may cause
unwanted noise on the system)
- TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
Tras=45ns)
- TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
- TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
comply with the 3 ODT clk requirements)
- TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
- TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
- DDR_SDRAM_MODE[AL]changed from 0 to 1.
- DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
- DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
- DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
The last commit on this tree was
6775c68683a53c7abc778774641aac6f833a2cbf
Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
Cc: Razzaz Mazyar <MRazzaz@freescale.com>
Cc: Josep P J <PJ.Joseph@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jerry Van Baren [Sat, 12 Jan 2008 18:24:14 +0000 (13:24 -0500)]
Enable the isdram command on the MPC8360EMDS board
The isdram command prints out decoded information the "serial presence
detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
debugging memory configuration problems.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 11 Jan 2008 10:48:24 +0000 (18:48 +0800)]
mpc83xx: Add the support for MPC8315ERDB board
The features list:
- Boot from NOR Flash
- DDR2 266MHz hardcoded configuration
- Local bus NOR Flash R/W operation
- I2C, UART, MII and RTC
- eTSEC0/1 support
- PCI host
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 11 Jan 2008 10:46:50 +0000 (18:46 +0800)]
mpc83xx: Add config of eTSEC emergency priority in SPCR
The TSEC emergency priority definition of 831x/837x
is different than the definition of 834x in SPCR register.
Add the other config of TSEC emergency priority into
cpu_init.c
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 11 Jan 2008 10:42:19 +0000 (18:42 +0800)]
mpc83xx: Remove cache config from MPC8360ERDK.h
The MPC8360ERDK board support patch is added before
the commit
2c5b48fc205c3e2752910da8f39209ed075929e5
so, miss clean up it.
The patch clean up the miss cache config.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Mon, 14 Jan 2008 20:09:32 +0000 (23:09 +0300)]
nand: FSL UPM NAND driver
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Kyungmin Park [Mon, 14 Jan 2008 23:59:44 +0000 (08:59 +0900)]
OneNAND: Separate U-Boot dependent code from OneNAND
OneNAND: Separate U-Boot dependent code from OneNAND
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Tue, 15 Jan 2008 23:01:01 +0000 (00:01 +0100)]
LWMON5: enable hush shell as command line parser
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 Jan 2008 16:22:28 +0000 (17:22 +0100)]
ADS5121: disable watchdog; enable image timestamps
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Tue, 15 Jan 2008 16:21:28 +0000 (17:21 +0100)]
TK885D: fixes for bigger flash sector sizes on new modules;
adjust default environment;
disable SCC ethernet (not used on this board).
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 14 Jan 2008 09:48:28 +0000 (10:48 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Dave Liu [Mon, 14 Jan 2008 03:12:01 +0000 (11:12 +0800)]
QE: fix compile warning
qe.c: In function 'qe_upload_firmware':
qe.c:390: warning: pointer targets in passing argument 2
uec.c: In function 'uec_initialize':
uec.c:1236: warning: 'uec_info' may be used uninitialized
Signed-off-by: Dave Liu <daveliu@freescale.com>
Stefan Roese [Mon, 14 Jan 2008 09:05:05 +0000 (10:05 +0100)]
ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
Now that bit 29 is the USB PHY reset bit, update the Kilauea port
to remove the USB PHY reset after powerup. The CPLD will keep the
USB PHY in reset (active low) until the bit is set to 1 in
board_early_init_f().
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 22:26:45 +0000 (23:26 +0100)]
ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 22:37:50 +0000 (23:37 +0100)]
ADS5121: Fix typo in ads5121.c, adjust default environment
Signed-off-by: Wolfgang Denk <wd@denx.de>
John Rigby [Sat, 25 Aug 2007 00:18:43 +0000 (18:18 -0600)]
ADS5121: MAX slew rate for PATA pins
Signed-off-by: John Rigby <jrigby@freescale.com>
Wolfgang Denk [Sun, 13 Jan 2008 20:05:52 +0000 (21:05 +0100)]
Fix Makefile dependency problem with parallel builds.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 18:51:39 +0000 (19:51 +0100)]
MPC8544DS: fix board Makefile for silent build (with -s)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 15:44:08 +0000 (16:44 +0100)]
PMC440 board: fix board Makefile for out-of-tree building
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 15:07:44 +0000 (16:07 +0100)]
Makalu: fix compile warning
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 14:59:21 +0000 (15:59 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Jean-Christophe PLAGNIOL-VILLARD [Sun, 13 Jan 2008 11:36:12 +0000 (12:36 +0100)]
cmd_nand : fix compiler warning.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Michael Schwingen [Sat, 12 Jan 2008 19:29:47 +0000 (20:29 +0100)]
CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Acked-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sun, 13 Jan 2008 14:04:37 +0000 (15:04 +0100)]
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Wolfgang Denk [Sun, 13 Jan 2008 01:19:44 +0000 (02:19 +0100)]
MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 13 Jan 2008 01:19:13 +0000 (02:19 +0100)]
MPC8xx FEC driver: fix compiler warning.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 12 Jan 2008 23:59:21 +0000 (00:59 +0100)]
Fix Makefile dependencies issues; allow silent build
- get rid of "version" target whichdidn't really work
- make autoconf.mk depend on version_autogenerated.h to make sure
to rebuild files as needed
- add XECHO macro to allow for silent build using "make -s"
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 12 Jan 2008 23:55:47 +0000 (00:55 +0100)]
ADS5121e: fix compile warning
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 12 Jan 2008 23:55:18 +0000 (00:55 +0100)]
MUNICes: fix board Makefile for remote build directory
Signed-off-by: Wolfgang Denk <wd@denx.de>
Oliver Weber [Wed, 9 Jan 2008 16:04:38 +0000 (17:04 +0100)]
MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
Signed-off-by: Oliver Weber <almoeli@gmx.de>
Andreas Engel [Wed, 9 Jan 2008 16:10:56 +0000 (17:10 +0100)]
Make bootretry work when command line editing is enabled
Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
This patch fixes the problem.
Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
Larry Johnson [Sat, 12 Jan 2008 04:26:18 +0000 (23:26 -0500)]
Refactor code for "i2c sdram" command
Signed-off-by: Larry Johnson <lrj@acm.org>
Larry Johnson [Fri, 11 Jan 2008 03:23:39 +0000 (22:23 -0500)]
Fix "i2c sdram" command for DDR2 DIMMs
Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
"i2c sdram" command. This patch provides correct alternative
interpretations when DDR2 memory is detected.
Signed-off-by: Larry Johnson <lrj@acm.org>
Wolfgang Denk [Sat, 12 Jan 2008 19:31:39 +0000 (20:31 +0100)]
Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
With recent toolchain versions, some boards would not build because
or errors like this one (here for ocotea board when building with
ELDK 4.2 beta):
ppc_4xx-ld: section .bootpg [
fffff000 ->
fffff23b] overlaps section .bss [
fffee900 ->
fffff8ab]
For many boards, the .bss section is big enough that it wraps around
at the end of the address space (0xFFFFFFFF), so the problem will not
be visible unless you use a 64 bit tool chain for development. On
some boards however, changes to the code size (due to different
optimizations) we bail out with section overlaps like above.
The fix is to add the NOLOAD attribute to the .bss and .sbss
sections, telling the linker that .bss does not consume any space in
the image.
Signed-off-by: Wolfgang Denk <wd@denx.de>
TsiChung Liew [Sat, 12 Jan 2008 02:42:58 +0000 (20:42 -0600)]
USB: Add Philips 1561 PCI-OHCI ids
(needed for M5475EVB)
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Wolfgang Denk [Sat, 12 Jan 2008 14:51:34 +0000 (15:51 +0100)]
Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
boards.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Grzegorz Bernacki [Fri, 11 Jan 2008 11:03:43 +0000 (12:03 +0100)]
MPC512X: Cleanup bus clock names.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Grzegorz Bernacki [Tue, 8 Jan 2008 16:16:59 +0000 (17:16 +0100)]
MPC512X: Fixed typo in macro name.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Grzegorz Bernacki [Tue, 8 Jan 2008 16:16:15 +0000 (17:16 +0100)]
ads5121: Added support for FDT.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Wolfgang Denk [Sat, 12 Jan 2008 00:05:50 +0000 (01:05 +0100)]
Coding Style cleanup; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:17 +0000 (15:15 +0100)]
Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:16 +0000 (15:15 +0100)]
MUNICes: Set the right CFG_DEFAULT_MBAR value.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:15 +0000 (15:15 +0100)]
added the config File for the MUNICes board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 14:15:14 +0000 (15:15 +0100)]
added basic support for the MUNICes board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Fri, 11 Jan 2008 23:39:37 +0000 (00:39 +0100)]
Update CHANGELOG and MAINTAINERS files.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Anatolij Gustschin [Fri, 11 Jan 2008 01:15:02 +0000 (02:15 +0100)]
Fix compilation problem in common/cmd_bmp.c
common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
isn't defined. This patch fix this.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:09 +0000 (01:12 +0100)]
Fix defaultconfig for the mgcoge board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:08 +0000 (01:12 +0100)]
Added support for the mgcoge board from keymile.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:07 +0000 (01:12 +0100)]
Enable SMC microcode relocation patch for SMC1.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 11 Jan 2008 00:12:06 +0000 (01:12 +0100)]
Added support for the mgsuvd board from keymile.
Signed-off-by: Heiko Schocher <hs@denx.de>
James Yang [Thu, 10 Jan 2008 22:02:07 +0000 (16:02 -0600)]
Fix 64-bit vsprintf.
There were some size and unsigned problems.
Also add support for "ll" size modifier in format string like glibc
Signed-off-by: James Yang <James.Yang@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Larry Johnson [Wed, 9 Jan 2008 17:42:35 +0000 (12:42 -0500)]
Remove superfluous preprocessor conditionals from LM73 driver
(1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
(2) Use conditional Makefile.o.
Signed-off-by: Larry Johnson <lrj@acm.org>
Guennadi Liakhovetski [Thu, 10 Jan 2008 16:59:07 +0000 (17:59 +0100)]
Add support for the TK885D baseboard from TELE-DATA
The TK885D board uses a TQM885D module from TQ, this port adds an
own configuration file and adds a last_stage_init() method to
configure the two PHYs, depending on the phy_auto_nego environment
variable.
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Wolfgang Denk [Fri, 11 Jan 2008 23:22:05 +0000 (00:22 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-video
Wolfgang Denk [Fri, 11 Jan 2008 23:13:37 +0000 (00:13 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Wolfgang Denk [Fri, 11 Jan 2008 23:04:01 +0000 (00:04 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx
Wolfgang Denk [Fri, 11 Jan 2008 23:02:26 +0000 (00:02 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Wolfgang Denk [Fri, 11 Jan 2008 22:53:26 +0000 (23:53 +0100)]
Merge ../custodians
Kumar Gala [Thu, 10 Jan 2008 08:22:05 +0000 (02:22 -0600)]
Fix compiler warning
main.c: In function 'readline_into_buffer':
main.c:927: warning: unused variable 'p_buf'
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Anatolij Gustschin [Fri, 11 Jan 2008 13:30:01 +0000 (14:30 +0100)]
Add Fujitsu CoralP/Lime video driver
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Anatolij Gustschin [Fri, 11 Jan 2008 01:39:47 +0000 (02:39 +0100)]
Fix video console newline and carriage return handling
Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
are not displayed correctly. This is an attempt to fix
this issue. Also add carriage return handling.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Stefan Roese [Fri, 11 Jan 2008 14:53:58 +0000 (15:53 +0100)]
ppc4xx: Fix sdram init on Sequoia boards
Clear possible errors in MCSR resulting from data-eye-search.
If not done, then we could get an interrupt later on when
exceptions are enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
Anatolij Gustschin [Fri, 11 Jan 2008 14:31:09 +0000 (15:31 +0100)]
ppc4xx: Rework Lime support for lwmon5
Rework Lime support for lwmon5 using new video driver
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Matthias Fuchs [Fri, 11 Jan 2008 13:55:16 +0000 (14:55 +0100)]
ppc4xx: Update PMC440 config file
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Fri, 11 Jan 2008 13:55:08 +0000 (14:55 +0100)]
ppx4xx: Fix sdram init on PMC440 boards
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Dave Liu [Thu, 10 Jan 2008 15:09:33 +0000 (23:09 +0800)]
mpc83xx: Fix the bug of 266MHz data rate DDR
The DDR doesn't work on the 266MHz data rate,
the patch fix the bug.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:08:26 +0000 (23:08 +0800)]
mpc83xx: Make the code more readable
Format the code, make it more readable
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:07:23 +0000 (23:07 +0800)]
mpc83xx: Reduce the latency of DDR
Reduce the AL from 2 to 1 clock to improve the performance.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:06:05 +0000 (23:06 +0800)]
mpc83xx: Fix the wrong definition of MPC8315E
According to the latest user manual of MPC8315E,
1) The SVCOD of HRCWL is different than 837x
2) The SCCR has changes
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:05:00 +0000 (23:05 +0800)]
mpc83xx: Fix the typo in mpc83xx.h
The SPCR about TSEC priority is wrong.
Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:04:13 +0000 (23:04 +0800)]
mpc83xx: Fix the typo in global data struct
Fix the typo in global_data.h
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 10 Jan 2008 15:03:03 +0000 (23:03 +0800)]
mpc83xx: Remove cache config from config.h
clean up the cache config from configs.h of board
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Wed, 9 Jan 2008 17:57:47 +0000 (20:57 +0300)]
mpc83xx: add support for the MPC8360E-RDK
This is MPC8360E based board with:
- 256MB fixed SDRAM;
- 8MB Intel Strata NOR flash;
- StMICRO 64MiB NAND flash;
- two 10/100/1000 ethernet ports connected via Broadcom
BCM5481 PHYs;
- two 10/100 ethernet ports connected via National
DP83848 PHYs;
- one PCI and one miniPCI slots;
- four serial ports (two NS16550-compatible, two UCCs);
- four USB ports working through MPC8360E "FHCI" USB controller;
- Fujitsu MB86277 graphics controller;
- Analog to Digital Converter/Touchscreen controller, AD7843
connected to SPI.
Features not supported in this patch are:
- StMICRO 64MiB NAND flash (patch sent);
- MINT framebuffer initialization (patch is pending);
- Fetching production information from the EEPROM via I2C;
- FHCI USB;
- Two slow UCCs used as RS-485 UARTs.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Anton Vorontsov [Wed, 9 Jan 2008 17:57:40 +0000 (20:57 +0300)]
mpc83xx: add "fsl, qe" compatible fixups
New device trees will use "fsl,qe" compatible properties.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
projects / project / bcm63xx / u-boot.git / log