Revert "drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk"

This reverts commit 8f067837c4b713ce2e69be95af7b2a5eb3bd7de8.

HSD says "WA withdrawn. It was causing corruption with some images.
WA is not strictly necessary since this bug just causes loss of FBC
compression with some sizes and images, but doesn't break anything."

Fixes: 8f067837c4b7 ("drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171117010825.23118-1-radhakrishna.sripada@intel.com

drm/i915: Calculate g4x intermediate watermarks correctly

The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.

When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.

CXSR must always be disabled in the intermediate case for modesets,
else we get a WARN for vblank wait timeout.

Also rename crtc_state to new_crtc_state, to distinguish it from the old
state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115163157.14372-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Calculate vlv/chv intermediate watermarks correctly, v3.

The watermarks it should calculate against are the old optimal watermarks.
The currently active crtc watermarks are pure fiction, and are invalid in
case of a nonblocking modeset, page flip enabling/disabling planes or any
other reason.

When the crtc is disabled or during a modeset the intermediate watermarks
don't need to be programmed separately, and could be directly assigned
to the optimal watermarks.

CXSR must always be disabled in the intermediate case for modesets, else
we get a WARN for vblank wait timeout.

Also rename crtc_state to new_crtc_state, to distinguish it from the old state.

Changes since v1:
- Use intel_atomic_get_old_crtc_state. (ville)
Changes since v2:
- Always unset cxsr during modeset.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115163157.14372-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Pass crtc_state to ips toggle functions, v2

Changes since v1:
- Only pass crtc_state, not crtc.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-8-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Pass idle crtc_state to intel_dp_sink_crc

IPS can only be enabled if the primary plane is visible, so
first make sure sw state matches hw state by waiting for hw_done.

After this pass crtc_state to intel_dp_sink_crc() so that can be used,
instead of using legacy pointers.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110113503.16253-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Enable FIFO underrun reporting after initial fastset, v4.

The firmware may have set up the pipe correctly, but the FIFO
underrun and CRC interrupts are likely not enabled.

This resulted in debugfs_test.read_all_entries failing on haswell,
because of a timeout when reading the crc debugfs entry.

Solve this by enabling FIFO underrun reporting after the initial
fastset, which lets interrupts be generated as expected.

Changes since v1:
- Always enable CPU FIFO underrun reporting for >GEN2,
  and handle GEN2 correctly.
Changes since v2:
- Remove unneeded HAS_DDI, simplify GEN2 case.
Changes since v3:
- Use intel_crtc_pch_transcoder to determine pch transcoder for underruns. (Ville)
- Remove crtc->config dereference in intel_crtc_pch_transcoder. (Ville)

Testcase: debugfs_test.read_all_entries
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113144043.58658-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM

Commit  21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue
as WQ_MEM_RECLAIM") tried to fixup the check_flush_dependency warning
for hitting i915_gem_userptr_mn_invalidate_range_start from within the
shrinker, but I failed to notice userptr has 2 similarly named
workqueues. I marked up i915-userptr-acquire as WQ_MEM_RECLAIM whereas
we only wait upon i915-userptr-release from inside the reclaim paths.

[62530.869510] workqueue: PF_MEMALLOC task 7983(gem_shrink) is flushing !WQ_MEM_RECLAIM i915-userptr-release:          (null)
[62530.869515] ------------[ cut here ]------------
[62530.869519] WARNING: CPU: 1 PID: 7983 at kernel/workqueue.c:2434 check_flush_dependency+0x7f/0x110
[62530.869519] Modules linked in: pegasus mii ip6table_filter ip6_tables bnep iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic binfmt_misc nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hda_core snd_hwdep kvm snd_pcm irqbypass snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul crc32_pclmul 8250_dw ghash_clmulni_intel snd_seq pcbc snd_seq_device snd_timer btusb aesni_intel btrtl btbcm aes_x86_64 iwlwifi btintel crypto_simd glue_helper cryptd bluetooth snd intel_cstate input_leds idma64 intel_rapl_perf ecdh_generic serio_raw soundcore cfg80211 wmi_bmof virt_dma intel_lpss_pci intel_lpss acpi_als kfifo_buf industrialio winbond_cir soc_button_array rc_core spidev tpm_crb intel_hid acpi_pad mac_hid sparse_keymap
[62530.869546]  parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid i915 i2c_algo_bit prime_numbers drm_kms_helper syscopyarea e1000e sysfillrect sysimgblt fb_sys_fops ahci ptp pps_core libahci drm wmi video i2c_hid hid
[62530.869557] CPU: 1 PID: 7983 Comm: gem_shrink Tainted: G     U  W    L  4.14.0-rc8-drm-tip-ww45-commit-1342299+ #1
[62530.869558] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X098.A00.1707301945 07/30/2017
[62530.869559] task: ffffa1049dbeec80 task.stack: ffffae7d05c44000
[62530.869560] RIP: 0010:check_flush_dependency+0x7f/0x110
[62530.869561] RSP: 0018:ffffae7d05c473a0 EFLAGS: 00010286
[62530.869562] RAX: 000000000000006e RBX: ffffa1049540f400 RCX: ffffffffa3e55788
[62530.869562] RDX: 0000000000000000 RSI: 0000000000000092 RDI: 0000000000000202
[62530.869563] RBP: ffffae7d05c473c0 R08: 000000000000006e R09: 000000000038bb0e
[62530.869563] R10: 0000000000000000 R11: 000000000000006e R12: ffffa1049dbeec80
[62530.869564] R13: 0000000000000000 R14: 0000000000000000 R15: ffffae7d05c473e0
[62530.869565] FS:  00007f621b129880(0000) GS:ffffa1050b240000(0000) knlGS:0000000000000000
[62530.869566] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[62530.869566] CR2: 00007f6214400000 CR3: 0000000353a17003 CR4: 00000000003606e0
[62530.869567] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[62530.869567] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[62530.869568] Call Trace:
[62530.869570]  flush_workqueue+0x115/0x3d0
[62530.869573]  ? wake_up_process+0x15/0x20
[62530.869596]  i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915]
[62530.869614]  ? i915_gem_userptr_mn_invalidate_range_start+0x12f/0x160 [i915]
[62530.869616]  __mmu_notifier_invalidate_range_start+0x55/0x80
[62530.869618]  try_to_unmap_one+0x791/0x8b0
[62530.869620]  ? call_rwsem_down_read_failed+0x18/0x30
[62530.869622]  rmap_walk_anon+0x10b/0x260
[62530.869624]  rmap_walk+0x48/0x60
[62530.869625]  try_to_unmap+0x93/0xf0
[62530.869626]  ? page_remove_rmap+0x2a0/0x2a0
[62530.869627]  ? page_not_mapped+0x20/0x20
[62530.869629]  ? page_get_anon_vma+0x90/0x90
[62530.869630]  ? invalid_mkclean_vma+0x20/0x20
[62530.869631]  migrate_pages+0x946/0xaa0
[62530.869633]  ? __ClearPageMovable+0x10/0x10
[62530.869635]  ? isolate_freepages_block+0x3c0/0x3c0
[62530.869636]  compact_zone+0x22f/0x970
[62530.869638]  compact_zone_order+0xa3/0xd0
[62530.869640]  try_to_compact_pages+0x1a5/0x2a0
[62530.869641]  ? try_to_compact_pages+0x1a5/0x2a0
[62530.869643]  __alloc_pages_direct_compact+0x50/0x110
[62530.869644]  __alloc_pages_slowpath+0x4da/0xf30
[62530.869646]  __alloc_pages_nodemask+0x262/0x280
[62530.869648]  alloc_pages_vma+0x165/0x1e0
[62530.869649]  shmem_alloc_hugepage+0xd0/0x130
[62530.869651]  ? __radix_tree_insert+0x45/0x230
[62530.869652]  ? __vm_enough_memory+0x29/0x130
[62530.869654]  shmem_alloc_and_acct_page+0x10d/0x1e0
[62530.869655]  shmem_getpage_gfp+0x426/0xc00
[62530.869657]  shmem_fault+0xa0/0x1e0
[62530.869659]  ? file_update_time+0x60/0x110
[62530.869660]  __do_fault+0x1e/0xc0
[62530.869661]  __handle_mm_fault+0xa35/0x1170
[62530.869662]  handle_mm_fault+0xcc/0x1c0
[62530.869664]  __do_page_fault+0x262/0x4f0
[62530.869666]  do_page_fault+0x2e/0xe0
[62530.869667]  page_fault+0x22/0x30
[62530.869668] RIP: 0033:0x404335
[62530.869669] RSP: 002b:00007fff7829e420 EFLAGS: 00010216
[62530.869670] RAX: 00007f6210400000 RBX: 0000000000000004 RCX: 0000000000b80000
[62530.869670] RDX: 0000000000002e01 RSI: 0000000000008000 RDI: 0000000000000004
[62530.869671] RBP: 0000000000000019 R08: 0000000000000002 R09: 0000000000000000
[62530.869671] R10: 0000000000000559 R11: 0000000000000246 R12: 0000000008000000
[62530.869672] R13: 00000000004042f0 R14: 0000000000000004 R15: 000000000000007e
[62530.869673] Code: 00 8b b0 18 05 00 00 48 8d 8b b0 00 00 00 48 8d 90 c0 06 00 00 4d 89 f0 48 c7 c7 40 c0 c8 a3 c6 05 68 c5 e8 00 01 e8 c2 68 04 00 <0f> ff 4d 85 ed 74 18 49 8b 45 20 48 8b 70 08 8b 86 00 01 00 00
[62530.869691] ---[ end trace 01e01ad0ff5781f8 ]---

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103739
Fixes: 21cc6431e0c2 ("drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114173520.8829-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Add might_sleep() check to wait_for()

We should long past the time of trying to use wait_for() from inside
atomic contexts, so add a might_sleep() check to prevent misuse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114215655.4849-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/selftests: Add a GuC doorbells selftest

The first test aims to check guc_init_doorbell_hw, changing the existing
guc clients and doorbells state before calling it.

The second test tries to create as many clients as it is currently possible
(currently limited to max number of doorbells) and exercise the doorbell
alloc/dealloc code.

Since our usage mode require very few clients/doorbells, this code has
been exercised very lightly and it's good to have a simple test for it.

As reference, this test already helped identify the bug fixed by
commit 7f1ea2ac3017 ("drm/i915/guc: Fix doorbell id selection").

v2: Extend number of clients; check for client allocation failure when
number of doorbells is exceeded; validate client properties; reuse
guc_init_doorbell_hw (Chris).

v3: guc_init_doorbell_hw test added per Chris suggestion.

v4: Try to explain why guc_init_doorbell_hw exist and comment some
details in the subtest.

v5: Remove redundant pr_info at the beginning of each subtest (Chris);
rebase (s/i915_guc_client/intel_guc_client/).

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116220632.1909-1-michel.thierry@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Merge tag 'gvt-next-2017-11-16' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2017-11-16

- CSB HWSP update support (Weinan)
- GVT debug helpers, dyndbg and debugfs (Chuanxiao, Shuo)
- full virtualized opregion (Xiaolin)
- VM health check for sane fallback (Fred)
- workload submission code refactor for future enabling (Zhi)
- Updated repo URL in MAINTAINERS (Zhenyu)
- other many misc fixes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116092007.ww5bvfx7rf36bjmn@zhen-hp.sh.intel.com

drm/i915/cnl: Extend HDMI 2.0 support to CNL.

Starting on GLK we support HDMI 2.0. So this patch only
extend the work Shashank has made to GLK to CNL.

v2: The version that compiles :/
v3: Invert order to newer || older platforms check. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115184205.8104-1-rodrigo.vivi@intel.com

drm/i915/cnl: Simplify dco_fraction calculation.

I confess I never fully understood that previous calculation,
so this is not a "fix". But let's simplify this math
so poor brains like mine can read and make some sense of
it in the future.

v2: Don't follow the spec since that gives invalid
    values and it is also confusing. This Ville's
    version is much simpler.
v3: Use u64 cast instead of declaring a u64 dco. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115184257.8633-1-rodrigo.vivi@intel.com

drm/i915/cnl: Don't blindly replace qdiv.

Accordingly to spec "If Kdiv != 2, then Qdiv must be 1."
but we already handle qdiv values properly and this case here
should be spurious. But instead of blindly replacing let's
warn loudly instead. Because it means something was really
wrong on initial setup.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-6-rodrigo.vivi@intel.com

drm/i915/cnl: Fix wrpll math for higher freqs.

Spec describe all values in MHz. We handle our
clocks in KHz. This includes the best_dco_centrality that was
forgot in the same unity as spec. Consequently we couldn't
get a good divider for high frequenies. Hence HDMI 2.0 wasn't
working.

Spec tells 999999 for initial best_dco_centrality meaning the
max value in MHz.
Since we convert dco from MHz to KHz we also need to convert
this initial best_doc_centrality to 999999000 or 999999999
or even better, to the max that its variable allow.

This patch also replaces the use of "* KHz(1)" with the values
directly on KHz to avoid future confusion.

v2: Use U32_MAX instead of random 99999 as spec tells. (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114234223.10600-1-rodrigo.vivi@intel.com

drm/i915/cnl: Fix, simplify and unify wrpll variable sizes.

- 64 bits is not needed for afe_clock now we don't convert
  that to Hz.
- 16 bits is not enough for all dco stuff.
- unsigned is not relevant/needed for all divisors values.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-4-rodrigo.vivi@intel.com

drm/i915/cnl: Remove useless conversion.

No functional change. Just starting the wrpll fixes
with a clean-up to make units a bit more clear.

Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-3-rodrigo.vivi@intel.com

drm/i915/cnl: Remove spurious central_freq.

"Display software must leave this field at the default value.
It no longer needs to be configured as part of PLL programming."

We respect this already and we are setting up the default
one line below: "DPLL_CFGCR1_CENTRAL_FREQ".

Also we don't touch anywhere else this central_freq for cnl.
So let's remove from the final write.

No functional change. Only a clean-up patch.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114194759.24541-2-rodrigo.vivi@intel.com

drm/i915/selftests: exercise_ggtt may have nothing to do

When operating on the live_ggtt we have to find a usuable hole for our
test. It is possible for there to be no hole we can use, so initialise
the err to 0 for the early exit.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115152558.31252-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Don't sanitize frame start delay if the pipe is off

Avoid touching PIPECONF in intel_sanitize_crtc() unless the pipe is
actually on. Should cure some unclaimed register accesses during reset,
as we are rather cavalier in our approach to powerdomain management.

We don't have to sanitize this if the pipe is off since we will
overwrite the frame start delay anyway when turning the pipe on.

v2: Amended commit message to implicate the reset path (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102249
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115200442.15051-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|h

With all component structures and functions named appropriately, change
the names of GuC submission source files. There were bunch of style issues
in guc_submission.c that are highlighted now by checkpatch. Fix those.
Update name in Documentation/gpu. (Joonas)

v2: Rebase.

v3: Rebase.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Rename i915_guc_client struct to intel_guc_client

GuC submission clients are currently being used in kernel only hence
update the structure name to intel_guc_client.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-5-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Update name and prototype of GuC submission interface functions

i915 GuC submission is hardware interface and GuC APIs that are not user
facing should be named intel_guc* hence we change GuC submission related
functions name prefix to intel_guc. Also changed the parameter to these
functions to intel_guc struct.

v2: Using local guc variable in intel_uc_fini_hw. (Michal Wajdeczko)
Rebase.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-4-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/guc: Update names of submission related static functions

i915_guc_submit, i915_guc_dequeue, i915_guc_submission_park and
i915_guc_submission_upark are functions internal to GuC submission
hence remove "i915_" prefix.

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-3-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Update execlists tasklet naming

intel_lrc_irq_handler and i915_guc_irq_handler are HW submission related
tasklet functions. Name them with "submission_tasklet" suffix and
remove intel/i915 prefix as they are static. Also rename irq_tasklet
as just tasklet for clarity.

v2: s/_bh/_tasklet (Chris)

Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-2-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Prevent overflow of execbuf.buffer_count and num_cliprects

We check whether the multiplies will overflow prior to calling
kmalloc_array so that we can respond with -EINVAL for the invalid user
arguments rather than treating it as an -ENOMEM that would otherwise
occur. However, as Dan Carpenter pointed out, we did an addition on the
unsigned int prior to passing to kmalloc_array where it would be
promoted to size_t for the calculation, thereby allowing it to overflow
and underallocate.

v2: buffer_count is currently limited to INT_MAX because we treat it as
signaled variable for LUT_HANDLE in eb_lookup_vma
v3: Move common checks for eb1/eb2 into the same function
v4: Put the check back for nfence*sizeof(user_fence) overflow
v5: access_ok uses ULONG_MAX but kvmalloc_array uses SIZE_MAX
v6: size_t and unsigned long are not type-equivalent on 32b

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116105059.25142-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Clear breadcrumb node when cancelling signaling

When we call intel_engine_cancel_signaling() to stop reporting when
a request is completed via an asynchronous signal, we remove that request
from the breadcrumb wait queue. However, we may be concurrently
processing that request in the signaler itself, the actual operations on
the request's node itself are serialised but we do not actually clear the
waiter after removing it from the tree allowing both parties to attempt
to do so and corrupting the rbtree. (Previously removing from the
breadcrumb wait queue could only be done on behalf of i915_wait_request,
so this race could not happen).

Reported-by: "He, Bo" <bo.he@intel.com>
Fixes: 9eb143bbec7d ("drm/i915: Allow a request to be cancelled")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "He, Bo" <bo.he@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115121458.24655-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Print the condition causing GEM_BUG_ON

It is easier to categorize and debug bugs if the failed condition
is in plain sight in the actual dmesg output. Make it so.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171116083954.3357-1-mika.kuoppala@linux.intel.com

drm/i915/gvt: Move request alloc to dispatch_workload path only

Previously the performance is improved through the workload auditing
and shadowing ahead of vGPU scheduling, however, there is the case that
more requests are allocated in submit_context before the previous request
is added, the timeline will hold its seqno which is later.

This patch is to move the request alloc to dispatch_workload function,
where is the same place as request is added.

It will fix the issue of kernel BUG for (timeline->seqno != request->fence.seqno)
check when add_request.

Fixes: 89ea20b930cb ("drm/i915/gvt: Factor out scan and shadow from workload dispatch")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Let each vgpu has separate opregion memory

Currently every vgpu share a common gvt opregion memory, but
it is freed at vgpu destroy, then the later vgpu doesn't have
opregion memory once the first vgpu is destroyed. This cause
guest function failure like reboot, second or later boot.

This patch allocate and init virt opregion memory for each
vgpu, so this memory could be freed at vgpu destroy.

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Limit read hw reg to active vgpu

mmio_read_from_hw() let vgpu could read hw reg, if vgpu's workload
is running on hw, things is good. Otherwise vgpu will get other
vgpu's reg val, it is unsafe.

This patch limit such hw access to active vgpu. If vgpu isn't
running on hw, the reg read of this vgpu will get the last active
val which saved at schedule_out.

v2: ring timestamp is walking continuously even if the ring is idle.
    so read hw directly. (Zhenyu)

Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Revert "drm/i915/gvt: Refine broken PPGTT scratch"

This reverts commit b20d09886fd1b74cd2255d846029a049e524db14.

This caused windows driver boot errors for invalid page address.
Revert for now.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Emulate PCI expansion ROM base address register

Our vGPU doesn't have a device ROM, we need follow the PCI spec to
report this info to drivers. Otherwise, we would see below errors.

Inspecting possible rom at 0xfe049000 (vd=8086:1912 bdf=00:10.0)
qemu-system-x86_64: vfio-pci: Cannot read device rom at 00000000-0000-0000-0000-000000000001
Device option ROM contents are probably invalid (check dmesg).
Skip option ROM probe with rombar=0, or load from file with romfile=No option rom signature (got 4860)

I will also send a improvement patch to PCI subsystem related to PCI ROM.
But no idea to omit below error, since no pattern to detect vbios shadow
without touch its content.
0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Make gvt_vgpu_err use pr_err

gvt_vgpu_err means something goes wrong. We need the error propagates to
kernel message by default.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Don't dump partial state in cmd parser

I have seen the cmd parser dump partial odd info. Stop that and only dump
the full verbose info when debug enabled.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Reduce rcs mocs switch latency

Use I915_WRITE_FW instead of I915_WRITE to reduce overhead.
The overall mmio switch latency lowers from ~600us to ~180us.

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

MAINTAINERS: Update gvt-linux.git new repo place

gvt-linux.git repo is moved for its new place under
https://github.com/intel/gvt-linux.git

Old https://github.com/01org/gvt-linux.git is set
only for redirect now.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add new debugfs tool mmio_diff

This new debugfs entry is used to figure out which registers of vGPU
is different to host. It is a useful tool for new platform enabling
and debugging. When read this entry, all the diff mmio are recognized
and sorted by mmio offset. Besides, the bit positions of different
value are listed in 'Diff' column. Here is a show:

$ sudo cat ./mmio_diff
Offset   HW       vGPU     Diff
00002030 000025f8 00000000 3-8,10,13
00002034 012025f8 00000000 3-8,10,13,21,24
00002038 027fb000 00000000 12-13,15-22,25
0000203c 00003000 00000000 12-13
00002054 0000000a 00000040 1,3,6
00002074 012025f8 00000000 3-8,10,13,21,24
00002080 fffe6000 00000000 13-14,17-31
000020a8 fffffeff ffffffff 8
000020d4 00000004 00000000 2
....
00145974 eb42718c 010c11b0 2-5,13-14,17-19,22,25,27,29-31
00145978 0000002f 0000002a 0,2
0014597c 0000002f 0000002a 0,2
00145980 0000002b 00000028 0-1
00145984 a5a87c9e b27d20c0 1-4,6,10-12,14,16,18,20,22-26,28
001459c0 88390000 883c0000 16,18
00146200 88350000 883a0000 16-19
Total: 72432, Diff: 901

v3: fix a typo.
v2: add mmio_hw_access_pre/post().

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add mmio iterator intel_gvt_for_each_tracked_mmio()

This patch add a function intel_gvt_for_each_tracked_mmio() to
iterate each tracked mmio. The caller don't be aware of how the
tracked mmios are presented internally.

v2: remove snapshot_hw_mmio_registers().

Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: opregion virtualization for win guest

this is an enhanced opregion emulation for win guest support
by initializing more data members including opregion header
size, version and child device propertity for display port.
for simplicity, redefined child_device_config structure.

Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: update CSB and CSB write pointer in virtual HWSP

The engine provides a mirror of the CSB and CSB write pointer in the HWSP.
Read these status from virtual HWSP in VM can reduce CPU utilization while
applications have much more short GPU workloads. Here we update the
corresponding data in virtual HWSP as it in virtual MMIO.

Before read these status from HWSP in GVT-g VM, please ensure the host
support it by checking the BIT(3) of caps in PVINFO.

Virtual HWSP only support GEN8+ platform, since the HWSP MMIO may change
follow the platform update, please add the corresponding MMIO emulation
when enable new platforms in GVT-g.

v3 : Add address audit in HWSP address update.

v4 :
     Separate this patch with enalbe virtual HWSP in VM.
     Use intel_gvt_render_mmio_to_ring_id() to determine ring_id by offset.

v5 : Remove unnessary check about Gen8, GVT-g only support Gen8+.

Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Refine broken PPGTT scratch

Refine previously broken PPGTT scratch. Scratch PTE was no correctly
handled and also the handling of scratch entries in page table walk was
not well organized, which brings gaps of introducing lazy shadow.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Introduce ops->set_present()

We need ops->set_present() during generating a new scratch page table
entry.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Introduce page table type of current level in GTT type enumerations

Need to figure out page table type of current level by GTT entry type
during getting a scratch page table entry.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Fix a bug of unexpectedly clear scratch page table

During a vGPU reset, the scratch page table shouldn't be cleared, what
needs to be cleared should be the scratch page.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Let the caller choose if a shadow page should be put into hash table

As we want to re-use intel_vgpu_shadow_page in buidling scrach page table
and we don't want to put scrach page table page into hash table, a new
param is introduced to give the caller a choice to decide if a shadow page
should be put into hash table.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Use I915_GTT_PAGE_SIZE

As there is already an I915_GTT_PAGE_SIZE marco in i915, let GVT-g use it
as well. Also this patch re-names some GTT marcos with additional prefix.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Export intel_gvt_render_mmio_to_ring_id()

Since many emulation logic needs to convert the offset of ring registers
into ring id, we export it for other caller which might need it.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Factor intel_vgpu_page_track

As the data structure of "intel_vgpu_guest_page" will become much heavier
in future, it's better to factor out the guest memory page track mechnisim
as early as possible.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Refine shadow batch buffer

1) Use standard i915 GEM object sequence to access the shadow batch buffer.
2) Manage i915 vma life cycle to solve one FIXME.

v2:
- Refine code structure.
- Refine the usage of GEM APIs.
- Add the missing lock/unlock in release_shadow_batch_buffer.

Test on my SKL NuC.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Refine find_bb_size()

Returns the error code if something is wrong and the size of batch buffer
is passed through the pointer.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Use BIT() to make klockwork happy

Replace the plain bit usage with BIT() to make klockwork happy.

Cc: Deng Hongyi <hongyi.deng@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Add basic debugfs infrastructure

We need debugfs entry to expose some debug information of gvt and vGPUs.
The first tool will be added is mmio-diff, which help to find the
difference values of host and vGPU mmio. It's useful for platform
enabling.

This patch just add a basic debugfs infrastructure, each vGPU has its own
sub-folder. Two simple attributes are created as a template.
.
├── num_tracked_mmio
├── vgpu1
|   └── active
└── vgpu2
    └── active

Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Refactor vGPU type code in kvmgt part

all the vGPU type related code in kvmgt will be moved into
gvt.c/gvt.h files while the common vGPU type related interfaces
will be called.

v2:
- intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
  gvt part. (Wang, Zhi)

Signed-off-by: fred gao <fred.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move vGPU type related code into gvt file

In this patch, all the vGPU type related code will be merged into
same gvt file and the common interface will be exposed to both
XenGT and KvmGT.

v2:
- remove the useless mdev_* gvt_ops.
  add get_gvt_attr ops for MPT module.
  intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
  gvt part. (Wang, Zhi)
- set gvt_vgpu_type_groups[i] to NULL. (Zhang,Xiong)

Signed-off-by: fred gao <fred.gao@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move clean_workloads() into scheduler.c

Move clean_workloads() into scheduler.c since it's not specific to
execlist.

v2:

- Remove clean_workloads in intel_vgpu_select_submission_ops. (Zhenyu)

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Introduce intel_vgpu_reset_submission

Introduce an generic API to reset vGPU virtual submission interface.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Introduce vGPU submission ops

Introduce vGPU submission ops to support easy switching submission mode
of one vGPU between different OSes.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Remove one extra declaration in scheduler.h

Now the function has been moved into scheduler.c. The extra declaration
is not necessary.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move common vGPU workload creation into scheduler.c

Move common vGPU workload creation functions into scheduler.c since
they are not specific to execlist emulation.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move common workload preparation into prepare_workload()

Move common workload preparation into prepare_workload() in scheduler.c,
as they are not specific to execlist emulation.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Factor out prepare_workload()

Factor out prepare_workload() for the following re-factor.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Factor out vGPU workload creation/destroy

Factor out vGPU workload creation/destroy functions since they are not
specific to execlist emulation.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Use dyndbg for gvt debug info

It's better enable/disable and classify gvt debug info dynamically.
This patch change it to dyndbg so can be dynamically enable/disable
each item. All gvt log can be enabled by,
 $ echo 'file *gvt* +p' > /sys/kernel/debug/dynamic_debug/control

Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: ensure -ve return value is handled correctly

An earlier fix changed the return type from find_bb_size however the
integer return is being assigned to a unsigned int so the -ve error
check will never be detected. Make bb_size an int to fix this.

Detected by CoverityScan CID#1456886 ("Unsigned compared against 0")

Fixes: 1e3197d6ad73 ("drm/i915/gvt: Refine error handling for perform_bb_shadow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add VM healthy check for submit_context

When a scan error occurs in submit_context, this patch is to
decrease the mm ref count and free the workload struct before
the workload is abandoned.

v2:
- submit_context related code should be combined together. (Zhenyu)

v3:
- free all the unsubmitted workloads. (Zhenyu)

v4:
- refine the clean path. (Zhenyu)

v5:
- polish the title. (Zhenyu)

Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Add VM healthy check for workload_thread

When a scan error occurs in dispatch_workload, this patch is to
check the healthy state and free all the queued workloads before
the failsafe mode is entered.

Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Change the return type during command scan

Generally, there are 3 types of errors during command scan: a) some
commands might be unknown with EBADRQC;  b) some cmd access invalid
address with EFAULT; c) some unexpected force nonpriv cmd with EPERM.
later the healthy state can be judged through the return error.

v2:
- remove some internal i915 errors rating.  (Zhenyu)

v3:
- the healthy state is judged through the internal defined return
  error. (Zhenyu)
- force non priv cmd error can be ignored. (Kevin)

v4:
- reuse standard defined errno instead of recreate, e.g EBADRQC for
  unknown cmd, EFAULT for invalid address, EPERM for nonpriv. (Zhenyu)

v5:
- remove some irrelevant code for the patch.
- fix typo of vgpu_is_vm_unhealthy. (Zhenyu)

v6:
- move the healthy check and failsafe code into another patch. (Zhenyu)

v7:
- polish title and commit message. (Zhenyu)

Signed-off-by: fred gao <fred.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915/gvt: Do not allocate initial ring scan buffer

Theoretically, the largest bulk of commands in the ring buffer of an
engine might be the first submission, which usually contains a lot
of commands to initialize the HW. After removing the initial allocation
of the ring scan buffer and let krealloc() do everything we need, we
still have a big chance to get the buffer of suitable size in the first
submission.

Tested on my SKL NUC.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move ring scan buffers into intel_vgpu_submission

Move ring scan buffers into intel_vgpu_submission since they belongs to
a part of vGPU submission stuffs.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Rename reserved ring buffer

"reserved" means reserve something from somewhere. Actually they are
buffers used by command scanner. Rename it to ring_scan_buffer.

v2:

- Remove the usage of an extra variable. (Zhenyu)

Fixes: 0a53bc07f044 ("drm/i915/gvt: Separate cmd scan from request allocation")
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Fix a memory leak in cmd_parser.c

The pointer points to the original memory can never take the return value
of krealloc().

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move tlb_handle_pending into intel_vgpu_submission

Move tlb_handle_pending into intel_vgpu_submssion since it belongs to a
part of vGPU submission stuffs

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Introduce intel_vgpu_submission

Introduce intel_vgpu_submission to hold all members related to submission
in struct intel_vgpu before.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Move workload cache init/clean into intel_vgpu_{setup, clean}_submission()

Move vGPU workload cache initialization/de-initialization into
intel_vgpu_{setup, clean}_submission() since they are not specific to
execlist stuffs.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Rename intel_vgpu_{init, clean}_gvt_context()

To move workload related functions into scheduler.c, an expected way is
to collect all the init/clean functions related to vGPU workload
submission into fewer functions.

Rename intel_vgpu_{init, clean}_gvt_context() for above usage in future.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Make elsp_dwords in the right order

The context descriptors in elsp_dwords are stored in a reversed order and
the definition of context descriptor is also reversed. The revesred stuff
is hard to be used and might cause misunderstanding. Make them in the right
oder for following code re-factoring.

Tested on my SKL NUC.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

drm/i915/gvt: Add support for opregion virtualization

opregion emulated with a copy from host which leads to some display
bugs such as guest resolution adjustment failure due to host opregion
fail to claim port D support. with a fake opregion table provided
to fully emulate opregion to meet guest port requirement.

v1 - initial patch
v2 - reforamt opregion arrary with 0x02x output
v3 - opregion array removed with opregion generation on host initizaiton
v4 - rebased v3 patch from stable branch to staging branch which also has
     different struct child_device_config and addressed v3 review comments.

Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/i915: Remove pre-production pooled-EU w/a for Broxton

WaEnablePooledEuFor2x6 only applies to preproduction models, unsupported
since commit 0102ba1fd8af ("drm/i915: Add early BXT sdv to the list of
preproduction machines").

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114135116.30036-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>

drm/i915: Make request's wait-for-space explicit

At the start of building a request, we would wait for roughly enough
space to fit the average request (to reduce the likelihood of having to
wait and abort partway through request construction). To achieve we
would try to begin a 0-length command packet, this just adds extra
confusion so make the wait-for-space explicit, as in the next patch we
want to move it from the backend to the i915_gem_request_alloc() so it
can ensure that the wait-for-space is the first operation in building a
new request.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115151204.8105-2-chris@chris-wilson.co.uk

drm/i915/selftests: Increase size for mock ringbuffer

We don't actually emit any commands into the ringbuffer, so we set it
very small. However, an upcoming change centralises the wait-for-space
into i915_gem_request_alloc() and that imposes a minimum size upon all
ringbuffers (mock or real) of MIN_SPACE_FOR_ADD_REQUEST. Grow the
mock ringbuffer such that we allocate a single page for the struct+buffer,
satisfying the new condition without wasting too much space.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115151204.8105-1-chris@chris-wilson.co.uk

drm/i915: Initialise entry in intel_ppat_get() for older compilers

gcc-4.7.3 is confused by the guards inside intel_ppat_get() and reports:

drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘intel_ppat_get’:
drivers/gpu/drm/i915/i915_gem_gtt.c:3044:27: warning: ‘entry’ may be used uninitialized in this function [-Wmaybe-uninitialized]

Forgive the compiler this once, and rearrange the code so that entry is
always initialised.

v2: Flavour with a bit of NULL (instead of ERR_PTR(-ENOSPC))

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115131705.16341-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/selftests: Markup __iomem for igt_gem_coherency

Silence sparse warnings by using __iomem markup and io accessors.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191842.19063-1-chris@chris-wilson.co.uk

drm/i915: Use ELK stolen memory reserved detection for ILK

While I have no solid proof that ILK follows the ELK path when it
comes to the stolen memory reserved area, there are some hints that
it might be the case. Unfortunately my ILK doesn't have this enabled,
and no way to enable it via the BIOS it seems.

So let's have ILK use the ELK code path, and let's toss in a WARN
into the code to see if we catch anyone with an ILK that has this
enabled to further analyze the situation.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102151737.23336-3-ville.syrjala@linux.intel.com
Acked-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Make the report about a bogus stolen reserved area an error

Now that we should be properly filtering out the cases when the stolen
reserved area is disabled, let's convert the debug message about a
misplaced reserved area into an error.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102151737.23336-2-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Check if the stolen memory "reserved" area is enabled or not

Apparently there are some machines that put semi-sensible looking values
into the stolen "reserved" base and size, except those values are actually
outside the stolen memory. There is a bit in the register which
supposedly could tell us whether the reserved area is even enabled or
not. Let's check for that before we go trusting the base and size.

Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171102151737.23336-1-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Fix kerneldocs for intel_audio.c

Fix copy/paste fail in kerneldocs for intel_audio_codec_disable().

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191127.16188-1-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Call uncore_suspend before platform suspend handlers

Quoting Ville: "the forcewake timer might still be active until the uncore
suspend, and having active forcewakes while we've already told the GT wake
stuff to stop acting normally doesn't seem quite right to me."

Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114135518.15981-3-hdegoede@redhat.com

drm/i915: Re-register PMIC bus access notifier on runtime resume

intel_uncore_suspend() unregisters the uncore code's PMIC bus access
notifier and gets called on both normal and runtime suspend.

intel_uncore_resume_early() re-registers the notifier, but only on
normal resume. Add a new intel_uncore_runtime_resume() function which
only re-registers the notifier and call that on runtime resume.

Cc: stable@vger.kernel.org
Reported-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114135518.15981-2-hdegoede@redhat.com

drm/i915: Fix false-positive assert_rpm_wakelock_held in i915_pmic_bus_access_notifier v2

assert_rpm_wakelock_held is triggered from i915_pmic_bus_access_notifier
even though it gets unregistered on (runtime) suspend, this is caused
by a race happening under the following circumstances:

intel_runtime_pm_put does:

   atomic_dec(&dev_priv->pm.wakeref_count);

   pm_runtime_mark_last_busy(kdev);
   pm_runtime_put_autosuspend(kdev);

And pm_runtime_put_autosuspend calls intel_runtime_suspend from
a workqueue, so there is ample of time between the atomic_dec() and
intel_runtime_suspend() unregistering the notifier. If the notifier
gets called in this windowd assert_rpm_wakelock_held falsely triggers
(at this point we're not runtime-suspended yet).

This commit adds disable_rpm_wakeref_asserts and
enable_rpm_wakeref_asserts calls around the
intel_uncore_forcewake_get(FORCEWAKE_ALL) call in
i915_pmic_bus_access_notifier fixing the false-positive WARN_ON.

Changes in v2:
-Reword comment explaining why disabling the wakeref asserts is
 ok and necessary

Cc: stable@vger.kernel.org
Reported-by: FKr <bugs-freedesktop@ubermail.me>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110150301.9601-2-hdegoede@redhat.com

drm/i915/selftests: Always initialise err

smatch does not track initialised values as well as gcc, and this
triggers many warnings by smatch not presented by gcc. Silence smatch by
initialising the error values to -ENODEV, which we use to denote
internal errors. (If we see a selftest fail with a silent -ENODEV, we
know smatch was right!)

v2: smatch was right about igt_create_vma(), it may unlikely fail on the
first object allocation which we want to be loud about.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114223346.25958-1-chris@chris-wilson.co.uk
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>

drm/i915: Resume GuC before using GEM

Resuming GEM presumes it can talk to hw, in particular to ensure the
kernel context is loaded upon resume for powersaving. If the GuC is
still asleep at this point, we upset the HW. Rearrange the resume such
that we restore the original order of init-hw, resume-guc, use-gem.

Fixes: 37cd33006d02 ("drm/i915: Remove redundant intel_autoenable_gt_powersave()")
References: a1c419941453 ("drm/i915/guc: Add host2guc notification for suspend and resume")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114130300.25677-2-chris@chris-wilson.co.uk
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>

drm/i915: Display WA #1185 WaDisableDARBFClkGating:cnl, glk

Display is not sending a PMRsp when a PMReq is received
at the same time that all planes are turned off.
State machine in the dcprunit is stuck in the WAIT4DONE
state which means that there is no fill_done.

WA: disable arbiter clock gating, set bit [27] of 0x46530

v2: As Ville pointed out, based on the description the issue
    can happen when disabling the planes, similar to
    WaRsPkgCStateDisplayPMReq:hsw
    Also description of the issue was updated on commit
    message to make it more clear that we need this
    earlier.
v3: Restore comment about possibility to system hang
    to where we are sure about it, without speculation. (Ville).
v4: Remove doubled sob. Actually do v3 changes :/

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171111000319.5040-1-rodrigo.vivi@intel.com

Merge airlied/drm-next into drm-intel-next-queued

Catchup with upstream.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Unconditionally apply the Broxton register workaround set

Having removed the preproduction Broxton support (see commit 0102ba1fd8af
("drm/i915: Add early BXT sdv to the list of preproduction machines")),
we know we then always need the production Broxton workaround set and do
not need a predicate upon revision.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114134340.5439-2-chris@chris-wilson.co.uk

drm/i915: Remove pre-production Broxton register workarounds

We've begun excluding pre-production Broxton machines since commit
0102ba1fd8af ("drm/i915: Add early BXT sdv to the list of preproduction
machines"), now remove the list of workaround register values for those
early machines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927093325.24206-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114134340.5439-1-chris@chris-wilson.co.uk

drm/i915: Unify SLICE_UNIT_LEVEL_CLKGATE w/a for cnl

gem_workarounds reports that the SLICE_UNIT_LEVEL_CLKGATE write isn't
sticking. Commit 0a60797a0efb ("drm/i915: Implement
ReadHitWriteOnlyDisable.") presumes that SLICE_UNIT_LEVEL_CLKGATE is a
masked register in the context image, but commit 90007bca6162
("drm/i915/cnl: Introduce initial Cannonlake Workarounds.") lists it as
an ordering unmasked register. The masked write will be losing the
default settings if we trust the original commit. That gem_workarounds
reports the value is lost entirely is more worrying though -- but it
clearly suggests that it is not a masked register in the context image,
so unify both w/a to use the original rmw.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103705
Fixes: 0a60797a0efb ("drm/i915: Implement ReadHitWriteOnlyDisable.")
References: 90007bca6162 ("drm/i915/cnl: Introduce initial Cannonlake Workarounds.")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171111100336.11020-1-chris@chris-wilson.co.uk
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

drm/i915: fix 64bit divide

ERROR: "__udivdi3" [drivers/gpu/drm/i915/i915.ko] undefined!
ERROR: "__divdi3" [drivers/gpu/drm/i915/i915.ko] undefined!

Store the frequency in kHz and drop 64bit divisions.

v2: Use div64_u64 (Matthew)

v3: store frequency in kHz to avoid 64bit divs (Chris/Ville)

Fixes: dab9178333 ("drm/i915: expose command stream timestamp frequency to userspace")
Reported-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113233455.12085-3-lionel.g.landwerlin@intel.com
Reviewed-by: Ewelina Musial <ewelina.musial@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Generalize transcoder looping

To make looping through transcoders in intel_ddi.c more generic, let's switch
to use 'for_each_pipe()' macro to do this.

v2: Add a notion that we are dealing with transcoders instead of pipes (Jani)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1510216670-16848-1-git-send-email-mika.kahola@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/glk: Refactor handling of PLANE_COLOR_CTL for GLK+

Since GLK, some plane configuration settings have moved to the
PLANE_COLOR_CTL register. Refactor handling of the register to work like
PLANE_CTL. This also allows us to fix the set/read of the plane Alpha
Mode for GLK+.

v2: Adjust ordering of platform checks to be newest->oldest, drop
redundant comment about alpha blending. (Ville)

v3: Move Alpha Mode bits out of skl_plane_ctl_format into
skl_plane_ctl_alpha, and drop glk_plane_ctl_format, drop initialization
of state->color_ctl on platforms that don't use it, and drop color_ctl
local var. (Ville)

v4: Consolidate skl_plane_ctl_format switch statement on formats that
return the same settings. (Ville)

Signed-off-by: James Ausmus <james.ausmus@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113181128.2926-1-james.ausmus@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Introduce GEM proxy

GEM proxy is a kind of GEM, whose backing physical memory is pinned
and produced by guest VM and is used by host as read only. With GEM
proxy, host is able to access guest physical memory through GEM object
interface. As GEM proxy is such a special kind of GEM, a new flag
I915_GEM_OBJECT_IS_PROXY is introduced to ban host from changing the
backing storage of GEM proxy.

v3:
- update "Reviewed-by". (Joonas)

v2:
- return -ENXIO when pin and map pages of GEM proxy to kernel space.
  (Chris)

Here are the histories of this patch in "Dma-buf support for Gvt-g"
patch-set:

v14:
- return -ENXIO when gem proxy object is banned by ioctl.
  (Chris) (Daniel)

v13:
- add comments to GEM proxy. (Chris)
- don't ban GEM proxy in i915_gem_sw_finish_ioctl. (Chris)
- check GEM proxy bar after finishing i915_gem_object_wait. (Chris)
- remove GEM proxy bar in i915_gem_madvise_ioctl.

v6:
- add gem proxy barrier in the following ioctls. (Chris)
  i915_gem_set_caching_ioctl
  i915_gem_set_domain_ioctl
  i915_gem_sw_finish_ioctl
  i915_gem_set_tiling_ioctl
  i915_gem_madvise_ioctl

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1510555798-21079-2-git-send-email-tina.zhang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114102513.22269-2-chris@chris-wilson.co.uk