Hauke Mehrtens [Thu, 26 Jul 2012 15:42:18 +0000 (15:42 +0000)]
bcma: update to version from wireless-testing tag master-2012-07-16
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.
This also contains 3 additional patches fixing some bugs in bcma.
SVN-Revision: 32880
Florian Fainelli [Thu, 26 Jul 2012 09:29:22 +0000 (09:29 +0000)]
make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx)
SVN-Revision: 32878
John Crispin [Wed, 25 Jul 2012 19:52:30 +0000 (19:52 +0000)]
fix typo in modules.mk
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 32870
Florian Fainelli [Wed, 25 Jul 2012 19:36:19 +0000 (19:36 +0000)]
make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
SVN-Revision: 32869
Felix Fietkau [Wed, 25 Jul 2012 17:28:32 +0000 (17:28 +0000)]
mtd: fix trx_fixup
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem. I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.
Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 32866
Florian Fainelli [Wed, 25 Jul 2012 15:50:45 +0000 (15:50 +0000)]
move isp116x driver to target specific modules.mk
SVN-Revision: 32865
Florian Fainelli [Wed, 25 Jul 2012 15:50:42 +0000 (15:50 +0000)]
move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
Florian Fainelli [Wed, 25 Jul 2012 15:50:38 +0000 (15:50 +0000)]
move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
Florian Fainelli [Wed, 25 Jul 2012 15:50:36 +0000 (15:50 +0000)]
move ssb-gige to target specific modules.mk
SVN-Revision: 32862
Florian Fainelli [Wed, 25 Jul 2012 15:50:33 +0000 (15:50 +0000)]
move usb driver to target specific modules.mk
SVN-Revision: 32861
Florian Fainelli [Wed, 25 Jul 2012 15:50:29 +0000 (15:50 +0000)]
kmod-r6040 depends on PCI_SUPPORT
SVN-Revision: 32860
Florian Fainelli [Wed, 25 Jul 2012 15:50:26 +0000 (15:50 +0000)]
move mmc driver to target specific modules.mk
SVN-Revision: 32859
Florian Fainelli [Wed, 25 Jul 2012 15:50:23 +0000 (15:50 +0000)]
move ixp4xx-eth to target specific modules.mk
SVN-Revision: 32858
Florian Fainelli [Wed, 25 Jul 2012 15:50:20 +0000 (15:50 +0000)]
kmod-gpio-nxp74hc164 is not brcm63xx specific
SVN-Revision: 32857
Florian Fainelli [Wed, 25 Jul 2012 15:50:16 +0000 (15:50 +0000)]
move crypto module to target specific modules.mk
SVN-Revision: 32856
Florian Fainelli [Wed, 25 Jul 2012 15:50:13 +0000 (15:50 +0000)]
move i2c driver to target modules.mk
SVN-Revision: 32855
Florian Fainelli [Wed, 25 Jul 2012 15:50:10 +0000 (15:50 +0000)]
move watchdog driver to target specific modules.mk
SVN-Revision: 32854
Florian Fainelli [Wed, 25 Jul 2012 15:50:04 +0000 (15:50 +0000)]
move target specific spi modules
SVN-Revision: 32853
Florian Fainelli [Wed, 25 Jul 2012 15:50:02 +0000 (15:50 +0000)]
move target specific leds modules to ar71xx modules.mk
SVN-Revision: 32852
Florian Fainelli [Wed, 25 Jul 2012 15:49:57 +0000 (15:49 +0000)]
move leds modules back to target modules.mk
SVN-Revision: 32851
Florian Fainelli [Wed, 25 Jul 2012 15:49:54 +0000 (15:49 +0000)]
move i2c modules back to target modules.mk
SVN-Revision: 32850
Florian Fainelli [Wed, 25 Jul 2012 15:49:52 +0000 (15:49 +0000)]
fix network devices modules to depend on PCI instead of x86
SVN-Revision: 32849
Florian Fainelli [Wed, 25 Jul 2012 15:49:49 +0000 (15:49 +0000)]
move more x86-specific modules back to target modules.mk
SVN-Revision: 32848
Florian Fainelli [Wed, 25 Jul 2012 15:49:46 +0000 (15:49 +0000)]
fix libsas and mvsas dependencies against PCI and not x86
SVN-Revision: 32847
Florian Fainelli [Wed, 25 Jul 2012 15:49:42 +0000 (15:49 +0000)]
move x86 specific ide/pata modules to x86' modules.mk
SVN-Revision: 32846
Hauke Mehrtens [Wed, 25 Jul 2012 14:52:00 +0000 (14:52 +0000)]
brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
SVN-Revision: 32845
Florian Fainelli [Wed, 25 Jul 2012 14:01:57 +0000 (14:01 +0000)]
add yet another framebuffer symbol
SVN-Revision: 32844
Florian Fainelli [Wed, 25 Jul 2012 14:01:54 +0000 (14:01 +0000)]
split framebuffer helper modules to their own packages
SVN-Revision: 32843
Florian Fainelli [Wed, 25 Jul 2012 14:01:51 +0000 (14:01 +0000)]
remove broken flag
SVN-Revision: 32842
Florian Fainelli [Wed, 25 Jul 2012 14:01:49 +0000 (14:01 +0000)]
package buttons driver separately
SVN-Revision: 32841
Florian Fainelli [Wed, 25 Jul 2012 14:01:46 +0000 (14:01 +0000)]
package cobalt lcd as a module
SVN-Revision: 32840
John Crispin [Wed, 25 Jul 2012 10:34:06 +0000 (10:34 +0000)]
use autoreconf hook instead of manual call
SVN-Revision: 32837
John Crispin [Wed, 25 Jul 2012 09:05:23 +0000 (09:05 +0000)]
add unset CONFIG_FB_XGI to fix fullbuilds
SVN-Revision: 32836
John Crispin [Wed, 25 Jul 2012 09:05:18 +0000 (09:05 +0000)]
cleanup config-3.3, remove =m
SVN-Revision: 32835
John Crispin [Wed, 25 Jul 2012 08:01:38 +0000 (08:01 +0000)]
laguna: fix eeprom read buffer size during platform configuration
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna. The model name read in is 16 bytes but the original buffer was only 8 bytes.
Signed-off-by: David Acker <dacker@rajant.com>
SVN-Revision: 32833
John Crispin [Tue, 24 Jul 2012 23:07:35 +0000 (23:07 +0000)]
fixes build for 3.x kernel and remove old 2.6.x references
Signed-off-by: christoph.thielecke@gmx.de
SVN-Revision: 32832
John Crispin [Tue, 24 Jul 2012 23:07:30 +0000 (23:07 +0000)]
package-version-override always calls autoreconf
make it conditional on the existance of autoreconf
Signed-off-by: Ryan Nowakowski <tubaman@fattuba.com>
SVN-Revision: 32831
John Crispin [Tue, 24 Jul 2012 23:07:25 +0000 (23:07 +0000)]
mac80211/hostapd: add support for HT capa in case of IBSS/RSN
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32830
John Crispin [Tue, 24 Jul 2012 23:07:15 +0000 (23:07 +0000)]
wpa_supplicant: add more parameters
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32829
John Crispin [Tue, 24 Jul 2012 23:07:10 +0000 (23:07 +0000)]
hostapd: add pending patches
add patched needed to pass more parameters to the IBSS JOIN command
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32828
John Crispin [Tue, 24 Jul 2012 20:39:17 +0000 (20:39 +0000)]
adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835
Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
SVN-Revision: 32825
John Crispin [Tue, 24 Jul 2012 20:39:00 +0000 (20:39 +0000)]
add mktools and dosfstools which are needed for the raspberry pi
Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
SVN-Revision: 32824
John Crispin [Tue, 24 Jul 2012 20:38:55 +0000 (20:38 +0000)]
DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
SVN-Revision: 32823
John Crispin [Tue, 24 Jul 2012 20:38:49 +0000 (20:38 +0000)]
adds mkdapimg
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822
John Crispin [Tue, 24 Jul 2012 20:38:43 +0000 (20:38 +0000)]
D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32821
John Crispin [Tue, 24 Jul 2012 20:38:36 +0000 (20:38 +0000)]
MI424WR - add rev D support
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr
Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>
SVN-Revision: 32820
John Crispin [Tue, 24 Jul 2012 20:38:31 +0000 (20:38 +0000)]
initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
SVN-Revision: 32819
John Crispin [Tue, 24 Jul 2012 20:38:26 +0000 (20:38 +0000)]
ext4 support
This patch adds the ext4 filesystem support to mountd. Tested with ext2, ext3
and ext4 partitions.
Signed-off-by: Jaroslaw Swierczynski <jarek1701@gmail.com>
SVN-Revision: 32818
John Crispin [Tue, 24 Jul 2012 20:38:20 +0000 (20:38 +0000)]
add support for Rt3352 in rt2x00 driver
Forgot to do make package/mac80211/update, so the previously posted patch wasn't
in sync with compat-wireless. Now fixed.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32817
John Crispin [Tue, 24 Jul 2012 20:38:14 +0000 (20:38 +0000)]
add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32816
John Crispin [Tue, 24 Jul 2012 20:38:08 +0000 (20:38 +0000)]
enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32815
John Crispin [Tue, 24 Jul 2012 20:38:03 +0000 (20:38 +0000)]
add image build for ALL5002
add image build for ALL5002
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32814
John Crispin [Tue, 24 Jul 2012 20:37:56 +0000 (20:37 +0000)]
add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32813
John Crispin [Tue, 24 Jul 2012 20:37:50 +0000 (20:37 +0000)]
uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32812
Florian Fainelli [Tue, 24 Jul 2012 19:43:58 +0000 (19:43 +0000)]
orion_wdt is also available on kirkwood
SVN-Revision: 32811
Florian Fainelli [Tue, 24 Jul 2012 19:43:54 +0000 (19:43 +0000)]
move omap specific modules to modules.mk
SVN-Revision: 32810
Florian Fainelli [Tue, 24 Jul 2012 19:43:49 +0000 (19:43 +0000)]
move n810 battery module to omap24 modules.mk
SVN-Revision: 32809
Florian Fainelli [Tue, 24 Jul 2012 19:43:45 +0000 (19:43 +0000)]
move target specific modules to target's module.mk
SVN-Revision: 32808
Florian Fainelli [Tue, 24 Jul 2012 19:43:35 +0000 (19:43 +0000)]
package ep93xx framebuffer
SVN-Revision: 32807
Florian Fainelli [Tue, 24 Jul 2012 19:43:31 +0000 (19:43 +0000)]
remove crypto symbols override
SVN-Revision: 32806
Florian Fainelli [Tue, 24 Jul 2012 19:43:27 +0000 (19:43 +0000)]
create kmod-fb and update xen framebuffer module
SVN-Revision: 32805
Florian Fainelli [Tue, 24 Jul 2012 19:43:23 +0000 (19:43 +0000)]
add missing framebuffer related symbols
SVN-Revision: 32804
Florian Fainelli [Tue, 24 Jul 2012 19:43:19 +0000 (19:43 +0000)]
remove broken flag, since it works
SVN-Revision: 32803
Florian Fainelli [Tue, 24 Jul 2012 19:43:15 +0000 (19:43 +0000)]
fix sound modules loading order and dependencies
SVN-Revision: 32802
Florian Fainelli [Tue, 24 Jul 2012 19:43:10 +0000 (19:43 +0000)]
add sound-soc-ac97 package
SVN-Revision: 32801
Florian Fainelli [Tue, 24 Jul 2012 19:43:06 +0000 (19:43 +0000)]
add kmod-regmap including both i2c and spi modules
This is required for quite SoC sound support
SVN-Revision: 32800
Florian Fainelli [Tue, 24 Jul 2012 19:42:49 +0000 (19:42 +0000)]
package ep93xx touchscreen driver as a module
SVN-Revision: 32799
Florian Fainelli [Tue, 24 Jul 2012 19:42:44 +0000 (19:42 +0000)]
set DEVICE_TYPE to developerboard
SVN-Revision: 32798
John Crispin [Tue, 24 Jul 2012 17:28:25 +0000 (17:28 +0000)]
rebase config-3.3
SVN-Revision: 32797
John Crispin [Tue, 24 Jul 2012 17:28:12 +0000 (17:28 +0000)]
fix tantos patch properly
SVN-Revision: 32796
John Crispin [Tue, 24 Jul 2012 16:50:14 +0000 (16:50 +0000)]
make tantos switch select ETHERNET_PACKET_MANGLE
SVN-Revision: 32795
John Crispin [Tue, 24 Jul 2012 15:33:01 +0000 (15:33 +0000)]
move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
This broke falcon builds
SVN-Revision: 32794
Felix Fietkau [Mon, 23 Jul 2012 22:20:57 +0000 (22:20 +0000)]
ath5k: add tx power related fixes
SVN-Revision: 32793
Vasilis Tsiligiannis [Mon, 23 Jul 2012 19:17:05 +0000 (19:17 +0000)]
Revert "[package] kernel/modules: dont only change loading order on IPSEC*-m, propagate this to documentation too"
Preserve alphabetical order on KCONFIG and description for consistency with other module packages
This reverts commit r32775.
SVN-Revision: 32791
Felix Fietkau [Sun, 22 Jul 2012 21:00:07 +0000 (21:00 +0000)]
build: ensure that reordering of KCONFIG lines are handled properly and that the final result does not depend on the package scan order
SVN-Revision: 32788
Felix Fietkau [Sun, 22 Jul 2012 16:39:33 +0000 (16:39 +0000)]
crashlog: fix dependency, add memblock support
SVN-Revision: 32787
Jo-Philipp Wich [Fri, 20 Jul 2012 15:05:30 +0000 (15:05 +0000)]
owipcalc: fix output formatting quirks
SVN-Revision: 32786
Jo-Philipp Wich [Fri, 20 Jul 2012 13:43:10 +0000 (13:43 +0000)]
owipcalc: add new operations "next", "prev", "6to4" and "pop", implement a stack for intermediate results
SVN-Revision: 32785
Felix Fietkau [Fri, 20 Jul 2012 12:28:54 +0000 (12:28 +0000)]
grub: replace an unnecessary piece of inline assembly that breaks the build on recent mac os x
SVN-Revision: 32784
Felix Fietkau [Fri, 20 Jul 2012 12:28:50 +0000 (12:28 +0000)]
kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x
SVN-Revision: 32783
Jo-Philipp Wich [Thu, 19 Jul 2012 19:51:53 +0000 (19:51 +0000)]
owipcalc: add "prefix" operation to set prefix of base address during calculation
SVN-Revision: 32782
Vasilis Tsiligiannis [Thu, 19 Jul 2012 19:12:54 +0000 (19:12 +0000)]
dnsmasq: Fix DHCP no address on interface warning (#10570)
SVN-Revision: 32781
Jo-Philipp Wich [Thu, 19 Jul 2012 16:17:57 +0000 (16:17 +0000)]
owipcalc: remove binary
SVN-Revision: 32779
Jo-Philipp Wich [Thu, 19 Jul 2012 16:17:23 +0000 (16:17 +0000)]
add owipcalc - a small ipv4 & ipv6 calculation utility
SVN-Revision: 32778
Hamish Guthrie [Thu, 19 Jul 2012 08:36:11 +0000 (08:36 +0000)]
Increase iwlist buffer size
SVN-Revision: 32777
Luka Perkov [Tue, 17 Jul 2012 23:11:31 +0000 (23:11 +0000)]
kernel/modules: dont only change loading order on IPSEC*-m, propagate this to documentation too
SVN-Revision: 32775
Luka Perkov [Tue, 17 Jul 2012 23:11:29 +0000 (23:11 +0000)]
uboot-envtools: add support for alfa ap96
SVN-Revision: 32774
Vasilis Tsiligiannis [Tue, 17 Jul 2012 20:50:44 +0000 (20:50 +0000)]
kernel/modules: fix ipcomp6 load order
ipcomp6 depends on xfrm6_tunnel, load order changed accordingly.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
SVN-Revision: 32773
Jo-Philipp Wich [Tue, 17 Jul 2012 17:33:13 +0000 (17:33 +0000)]
toolchain: fix libgcc and libgfortran packages for avr32 and coldfire
SVN-Revision: 32772
Florian Fainelli [Tue, 17 Jul 2012 16:47:57 +0000 (16:47 +0000)]
rename upgrade image to sysupgrade.bin for consistency
SVN-Revision: 32770
Florian Fainelli [Tue, 17 Jul 2012 16:40:28 +0000 (16:40 +0000)]
add missing configuration symbols
SVN-Revision: 32769
Florian Fainelli [Tue, 17 Jul 2012 16:40:24 +0000 (16:40 +0000)]
au1000: implement sysupgrade platform.sh
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 32768
Florian Fainelli [Tue, 17 Jul 2012 16:39:52 +0000 (16:39 +0000)]
au1000: clean up profiles
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 32767
Florian Fainelli [Tue, 17 Jul 2012 16:39:47 +0000 (16:39 +0000)]
au1000: fix InternetBox idsel and remove broken flag
The following patch is necessary for the InternetBox (Surfbox) board-specific
idsel to work with newer kernels. Acutally I don't exactly understand why this
was not necessary before, but without the udelay, the MiniPCI adapter in slot 3
is not detected and set up correctly.
Also remove platform broken flag, it works.
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 32766
Vasilis Tsiligiannis [Tue, 17 Jul 2012 11:48:27 +0000 (11:48 +0000)]
dnsmasq: Bump to 2.62, add DHCPv6 variant
SVN-Revision: 32764
Felix Fietkau [Tue, 17 Jul 2012 11:28:30 +0000 (11:28 +0000)]
tools: prefer gmd5sum if present
SVN-Revision: 32761
Felix Fietkau [Mon, 16 Jul 2012 23:50:54 +0000 (23:50 +0000)]
mac80211: update to latest wireless-testing + some monitor mode fixes and some libertas driver fixes
SVN-Revision: 32760
Luka Perkov [Mon, 16 Jul 2012 22:32:00 +0000 (22:32 +0000)]
uboot-envtools: add kirkwood board support
SVN-Revision: 32756
Felix Fietkau [Mon, 16 Jul 2012 16:26:51 +0000 (16:26 +0000)]
uboot-ar71xx: fix compile on recent mac os x versions
SVN-Revision: 32750
Felix Fietkau [Mon, 16 Jul 2012 14:14:12 +0000 (14:14 +0000)]
scripts/config: build with gcc instead of clang on mac os x
SVN-Revision: 32749
projects / openwrt / staging / jow.git / log