Arnd Bergmann [Mon, 13 Mar 2017 16:43:48 +0000 (17:43 +0100)]
drm/msm: adreno: fix build error without debugfs
The newly added a5xx support fails to build when debugfs is diabled:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'?
This adds a missing #ifdef.
Fixes: b5f103ab98c7 ("drm/msm: gpu: Add A5XX target support")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sat, 25 Feb 2017 15:36:30 +0000 (10:36 -0500)]
drm/msm: move submit fence wait out of struct_mutex
Probably a symptom of needing finer grained locking, but if we wait on
the incoming fence-fd (which could come from a different context) while
holding struct_mutex, that blocks retire_worker so gpu fences cannot get
signalled.
This causes a problem if userspace manages to get more than a frame
ahead, leaving the atomic-commit worker blocked waiting on fences that
cannot be signaled because submit is blocked waiting for a fence
signalled from vblank (after the atomic commit which is blocked).
If we start having multiple fence ctxs for the gpu, submit_fence_sync()
would probably need to move outside of struct_mutex as well.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 15 Feb 2017 21:00:25 +0000 (16:00 -0500)]
drm/msm: pm runtime support for iommu
In particular, attach() and unmap() need pm-runtime get/put to ensure
iommu clks are enabled.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Wed, 15 Feb 2017 20:44:04 +0000 (15:44 -0500)]
drm/msm: convert to iommu_map_sg
Significantly simplifies things. Also iommu_unmap() can unmap an entire
iova range.
(If backporting to downstream kernel you might need to revert this. Or
at least double check older iommu implementation.)
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Sun, 12 Feb 2017 16:42:14 +0000 (11:42 -0500)]
drm/msm/adreno: reset ringbuffer in hw_init
We need to do this also in resume path when we need to re-hw_init().
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 10 Feb 2017 20:36:33 +0000 (15:36 -0500)]
drm/msm/gpu: use pm-runtime
We need to use pm-runtime properly when IOMMU is using device_link() to
control it's own clocks.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Fri, 10 Feb 2017 19:52:40 +0000 (14:52 -0500)]
drm/msm/gpu: move suspend/resume into debugfs->show
Each of the per-generation callbacks was doing this. Lets just simplify
and move it into toplevel show() fxn.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Dave Airlie [Thu, 6 Apr 2017 19:41:42 +0000 (05:41 +1000)]
Merge branch 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux into drm-next
A few more things for 4.12:
- ttm and amdgpu support for non-contiguous vram CPU mappings
- lots of bug fixes and cleanups for vega10
- misc bug fixes and code cleanups
[airlied: fix do_div error on 32-bit arm, not sure it's 100% correct]
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (58 commits)
drm/amdgpu: use uintptr_t instead of unsigned long to store pointer
drm/amdgpu: Avoid using signed integer to store pointer value
drm/amdgpu:invoke new implemented AI MB func
drm/amdgpu/vega10:timeout set to equal with VI
drm/amdgpu:implement the reset MB func for vega10
drm/amdgpu:fix typo for mxgpu_ai
drm/amdgpu:no need to involv HDP in KIQ
drm/amdgpu:add PSP block only load_type=PSP (v2)
drm/amdgpu/smu9: update to latest driver interface
drm/amd/amdgpu: cleanup gfx_v9_0_gpu_init()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_reset()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_start()
drm/amd/amdgpu: simplify gfx_v9_0_cp_gfx_enable()
drm/amd/amdgpu: cleanup gfx_v9_0_kiq_init_register()
drm/amd/amdgpu: Drop gfx_v9_0_print_status()
drm/amd/amdgpu: cleanup gfx_v9_0_set_gfx_eop_interrupt_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_reg_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_inst_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_init_queue()
drm/amdgpu: Move function amdgpu_has_atpx near other similar functions
...
Dave Airlie [Thu, 6 Apr 2017 19:38:27 +0000 (05:38 +1000)]
Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
Highlights:
- Cooling device support from Russell, to allow GPU throttling on system
thermal overload.
- Explicit fencing support from Philipp, implemented in a similar way to
drm/msm.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: submit support for out-fences
drm/etnaviv: return GPU fence through the submit structure
drm/etnaviv: submit support for in-fences
drm/etnaviv: add etnaviv cooling device
drm/etnaviv: switch to postclose
drm/etnaviv: add lockdep assert to fence allocation
Dave Airlie [Thu, 6 Apr 2017 19:34:46 +0000 (05:34 +1000)]
Merge tag 'imx-drm-next-2017-04-04' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm module/dependency changes
- The PRE/PRG drivers added an unwanted DRM dependency to the ipu-v3 driver.
Remove the dependency by conditionally disabling PRE/PRG support depending
on CONFIG_DRM.
- Merge the imx-ipuv3-crtc module into the imxdrm module. There is no reason
anymore for a separation between core drm driver and crtc/plane drivers,
especially since commit
eb8c88808c83 ("drm/imx: add deferred plane
disabling"), which added a dependency on imx-ipuv3-crtc to the imxdrm
module.
* tag 'imx-drm-next-2017-04-04' of git://git.pengutronix.de/git/pza/linux:
drm/imx: merge imx-drm-core and ipuv3-crtc in one module
gpu: ipu-v3: don't depend on DRM being enabled
Dave Airlie [Thu, 6 Apr 2017 19:20:06 +0000 (05:20 +1000)]
Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-next
A bit more for 4.12:
- GP10B support
- GP107 acceleration support
* 'linux-4.12' of git://github.com/skeggsb/linux: (23 commits)
drm/nouveau/gpio: enable interrupts on cards with 32 gpio lines
drm/nouveau/gr/gp107: initial support
drm/nouveau/core: recognise GP10B chipset
drm/nouveau/platform: support for probing GP10B
drm/nouveau/platform: make VDD regulator optional
drm/nouveau/gr: support for GP10B
drm/nouveau/ibus: add GP10B support
drm/nouveau/mc: add GP10B support
drm/nouveau/fb: add GP10B support
drm/nouveau/fifo: add GP10B support
drm/nouveau/msgqueue: support for GP10B PMU firmware
drm/nouveau/secboot: add GP10B support
drm/nouveau/secboot/gm20b: specify MC base address as argument
drm/nouveau/secboot: start LS firmware in post-run hook
drm/nouveau/secboot: let LS post_run hooks return error
drm/nouveau/secboot: pass instance to LS firmware loaders
drm/nouveau/secboot: allow to boot multiple falcons
drm/nouveau/imem/gk20a: Turn instmem lock into mutex
drm/nouveau: initial support (display-only) for GP107
drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
...
Alex Xie [Wed, 5 Apr 2017 20:54:34 +0000 (16:54 -0400)]
drm/amdgpu: use uintptr_t instead of unsigned long to store pointer
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Xie [Wed, 5 Apr 2017 20:33:00 +0000 (16:33 -0400)]
drm/amdgpu: Avoid using signed integer to store pointer value
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 5 Apr 2017 05:04:50 +0000 (13:04 +0800)]
drm/amdgpu:invoke new implemented AI MB func
Implement the sr-iov mailbox for soc15 asics.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 5 Apr 2017 04:17:39 +0000 (12:17 +0800)]
drm/amdgpu/vega10:timeout set to equal with VI
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 5 Apr 2017 04:17:18 +0000 (12:17 +0800)]
drm/amdgpu:implement the reset MB func for vega10
they are lack in the bringup stage, we need them for GPU reset
feature.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 5 Apr 2017 04:16:44 +0000 (12:16 +0800)]
drm/amdgpu:fix typo for mxgpu_ai
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 5 Apr 2017 08:39:11 +0000 (16:39 +0800)]
drm/amdgpu:no need to involv HDP in KIQ
1,KIQ won't touch VRAM so no need to involv HDP flush/invalidate at all.
2,According to CP hw designer KIQ better not use any PM4 package lead to wait behave.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 30 Mar 2017 10:00:20 +0000 (18:00 +0800)]
drm/amdgpu:add PSP block only load_type=PSP (v2)
SRIOV currently only can load ucode directly, and PSP
block is not supported by VF temporarily.
will remove this restrict and use PSP load all ucode
even for SRIOV later
v2: squash in check against module parameter
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 5 Apr 2017 03:54:43 +0000 (11:54 +0800)]
drm/amdgpu/smu9: update to latest driver interface
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 13:16:01 +0000 (09:16 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_gpu_init()
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 13:06:13 +0000 (09:06 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_reset()
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 13:04:50 +0000 (09:04 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_start()
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 13:03:08 +0000 (09:03 -0400)]
drm/amd/amdgpu: simplify gfx_v9_0_cp_gfx_enable()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 12:59:16 +0000 (08:59 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_kiq_init_register()
Use new WREG32_FIELD macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 12:54:11 +0000 (08:54 -0400)]
drm/amd/amdgpu: Drop gfx_v9_0_print_status()
It's not used in gfx 6/7/8 so drop it from gfx 9 as well.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 12:51:02 +0000 (08:51 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_set_gfx_eop_interrupt_state()
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 12:49:00 +0000 (08:49 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_reg_fault_state()
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 12:46:12 +0000 (08:46 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_inst_fault_state()
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Wed, 5 Apr 2017 12:32:13 +0000 (08:32 -0400)]
drm/amd/amdgpu: cleanup gfx_v9_0_init_queue()
Introduce WREG32_FIELD15 macro for SOC15 architectures.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Xie [Wed, 5 Apr 2017 15:07:13 +0000 (11:07 -0400)]
drm/amdgpu: Move function amdgpu_has_atpx near other similar functions
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 5 Apr 2017 09:46:12 +0000 (11:46 +0200)]
drm/amdgpu: fix over allocating of IRQ sources
We need an array of pointers to IRQ sources, not an array of sources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 15:40:13 +0000 (11:40 -0400)]
drm/amd/amdgpu: Clean up psp reload_quirk()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 15:36:20 +0000 (11:36 -0400)]
drm/amd/amdgpu: Fix psp_v3_1 compare sram
Had the wrong sense in the loop
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 4 Apr 2017 14:07:45 +0000 (16:07 +0200)]
drm/amdgpu: cleanup get_invalidate_req v2
The two hubs are just instances of the same hardware,
so the register bits are identical.
v2: keep the function pointer
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhang, Jerry [Wed, 29 Mar 2017 08:08:32 +0000 (16:08 +0800)]
drm/amdgpu: fix vm size and block size for VMPT (v5)
Set reasonable defaults per family.
v2: set both of them in gmc
v3: move vm size and block size in vm manager
v4: squash in warning fix from Alex Xie
v5: squash in min() warning fix
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 14:24:19 +0000 (10:24 -0400)]
drm/amd/amdgpu: Fix srbm_indexing in init/inactive hqd code
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 13:48:32 +0000 (09:48 -0400)]
drm/amd/amdgpu: Clean up gfx_v8_0_mqd_init()
Clean up a toggle with ?:.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 13:43:18 +0000 (09:43 -0400)]
drm/amd/amdgpu: de-numberify HQD_ACTIVE check.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 13:39:16 +0000 (09:39 -0400)]
drm/amd/amdgpu: clean up gfx_v8_0_kiq_init_register()
Swap read/write pattern for WREG32_FIELD()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 13:27:28 +0000 (09:27 -0400)]
drm/amd/amdgpu: Clean up gfx_v8_0_inactive_hqd()
Swap read/write pattern for WREG32_FIELD()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 4 Apr 2017 13:14:13 +0000 (09:14 -0400)]
drm/amd/amdgpu: Clean up gfx_v8_0_kiq_set_interrupt_state()
Use new WREG32_FIELD_OFFSET() to clean up code.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 30 Mar 2017 17:03:07 +0000 (13:03 -0400)]
drm/amdgpu/gfx8: KIQ is also disabled when MEC is disabled
Set the ready flag to reflect this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Mar 2017 13:31:13 +0000 (15:31 +0200)]
drm/amdgpu: cleanup VMHUB bit definitions v2
The two hubs are just instances of the same hardware,
so the register bits are identical.
v2: only remove get_vm_protection_bits for now
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 29 Mar 2017 09:16:05 +0000 (11:16 +0200)]
drm/amdgpu: handle CPU access for split VRAM buffers (v2)
This avoids merging them together on page fault.
v2: squash in 64-bit division fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adam Borowski [Sun, 2 Apr 2017 05:03:28 +0000 (07:03 +0200)]
drm/nouveau/gpio: enable interrupts on cards with 32 gpio lines
The code attempts to enable them, but hits an undefined behaviour by
shifting by the entire register's width:
int lines = 32;
u32 mask = (1 << lines) - 1; //
00000000 on x86
u32 mask = (1 << lines) - 1; //
ffffffff on arm (32)
u32 mask = (1 << lines) - 1; //
00000000 on arm64
u32 mask = (1ULL << lines) - 1; //
ffffffff everywhere
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 30 Mar 2017 06:12:30 +0000 (16:12 +1000)]
drm/nouveau/gr/gp107: initial support
Forked from GP106 implementation.
Differences:
- 1 PPC/GPC
- Slightly different grctx magics
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:23 +0000 (18:31 +0900)]
drm/nouveau/core: recognise GP10B chipset
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:22 +0000 (18:31 +0900)]
drm/nouveau/platform: support for probing GP10B
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:21 +0000 (18:31 +0900)]
drm/nouveau/platform: make VDD regulator optional
GP10B's power is managed by generic PM domains, so it does not require a
VDD regulator. Add this option into the chip function structure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:20 +0000 (18:31 +0900)]
drm/nouveau/gr: support for GP10B
GR is similar to GP100, with a few unavailable registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:19 +0000 (18:31 +0900)]
drm/nouveau/ibus: add GP10B support
GP10B requires a specific initialization sequence due to the absence of
devinit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:18 +0000 (18:31 +0900)]
drm/nouveau/mc: add GP10B support
GP10B's MC is compatible with GP100's, but engines need to be explicitly
put out of ELPG during init.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:17 +0000 (18:31 +0900)]
drm/nouveau/fb: add GP10B support
GP10B's FB is largely compatible with the GP100 implementation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:16 +0000 (18:31 +0900)]
drm/nouveau/fifo: add GP10B support
GP10B's FIFO is similar to GP100's, but only allows 512 channels.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:15 +0000 (18:31 +0900)]
drm/nouveau/msgqueue: support for GP10B PMU firmware
The GP10B firmware is very close to GM20B's. The only difference is that
it supports booting multiple falcons. In order to avoid having too much
functions and structures shared, implement its support in the same
source file as GM20B firmware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:14 +0000 (18:31 +0900)]
drm/nouveau/secboot: add GP10B support
GP10B's secboot is largely similar to GM20B's. Only differences are MC
base address and the fact that GPCCS is also securely managed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:13 +0000 (18:31 +0900)]
drm/nouveau/secboot/gm20b: specify MC base address as argument
Allow the MC base address to be specified as an argument for the WPR
region reading function. GP10B uses a different address layout as GM20B,
so this is necessary. Also export the function to be used by GP10B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:12 +0000 (18:31 +0900)]
drm/nouveau/secboot: start LS firmware in post-run hook
The LS firmware post-run hook is the right place to start said LS
firmware. Moving it here also allows to remove special handling in the
ACR code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:11 +0000 (18:31 +0900)]
drm/nouveau/secboot: let LS post_run hooks return error
A LS post-run hook can meet an error meaning the failure of secure boot.
Make sure this can be reported.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:10 +0000 (18:31 +0900)]
drm/nouveau/secboot: pass instance to LS firmware loaders
Having access to the secboot instance loading a LS firmware can be
useful to LS firmware handlers. At least more useful than just having an
out-of-context subdev pointer.
GP10B's firmware will also need to know the WPR address, which can be
obtained from the secboot instance.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Alexandre Courbot [Wed, 29 Mar 2017 09:31:09 +0000 (18:31 +0900)]
drm/nouveau/secboot: allow to boot multiple falcons
Change the secboot and msgqueue interfaces to take a mask of falcons to
reset instead of a single falcon. The GP10B firmware interface requires
FECS and GPCCS to be booted in a single firmware command.
For firmwares that only support single falcon boot, it is trivial to
loop over the mask and boot each falcons individually.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Thierry Reding [Mon, 30 Jan 2017 20:03:07 +0000 (21:03 +0100)]
drm/nouveau/imem/gk20a: Turn instmem lock into mutex
The gk20a implementation of instance memory uses vmap()/vunmap() to map
memory regions into the kernel's virtual address space. These functions
may sleep, so protecting them by a spin lock is not safe. This triggers
a warning if the DEBUG_ATOMIC_SLEEP Kconfig option is enabled. Fix this
by using a mutex instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Thu, 6 Apr 2017 00:35:26 +0000 (10:35 +1000)]
drm/nouveau: initial support (display-only) for GP107
Forked from GP106 implementation.
Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 5 Apr 2017 08:16:14 +0000 (18:16 +1000)]
drm/nouveau/kms/nv50: fix double dma_fence_put() when destroying plane state
When the atomic support was added to nouveau, the DRM core did not do this.
However, later in the same merge window, a commit (drm/fence: add in-fences
support) was merged that added it, leading to use-after-frees of the fence
object.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 4 Apr 2017 23:12:54 +0000 (09:12 +1000)]
drm/nouveau/kms/nv50: fix setting of HeadSetRasterVertBlankDmi method
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sat, 18 Mar 2017 20:23:10 +0000 (16:23 -0400)]
drm/nouveau/mmu/nv4a: use nv04 mmu rather than the nv44 one
The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.
Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ilia Mirkin [Sun, 19 Mar 2017 01:53:05 +0000 (21:53 -0400)]
drm/nouveau/mpeg: mthd returns true on success now
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: 590801c1a3 ("drm/nouveau/mpeg: remove dependence on namedb/engctx lookup")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Christian König [Wed, 29 Mar 2017 11:41:57 +0000 (13:41 +0200)]
drm/amdgpu: use TTM_PL_FLAG_CONTIGUOUS v2
Implement AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS using TTM_PL_FLAG_CONTIGUOUS
instead of a placement limit. That allows us to better handle CPU
accessible placements.
v2: prevent virtual BO start address from overflowing
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Mar 2017 13:55:07 +0000 (15:55 +0200)]
drm/amdgpu: move adjust_mc_addr into amdgpu_gart_funcs
We should probably rename amdgpu_gart_funcs sooner or later.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 3 Apr 2017 12:28:26 +0000 (14:28 +0200)]
drm/amdgpu: cleanup logic in amdgpu_vm_flush
Remove some of the extra checks where they don't hurt us.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 3 Apr 2017 12:16:07 +0000 (14:16 +0200)]
drm/amdgpu: cleanup coding style in amdgpu_vm_flush
Abort early if there is nothing todo and correctly indent the "if"s.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 3 Apr 2017 11:59:25 +0000 (13:59 +0200)]
drm/amdgpu: coding style of amdgpu_vm_is_gpu_reset
The name is a bit confusing and the extra "? true : false" is superflous.
Additional to that remove setting the reset counter directly after checking it.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Mar 2017 12:53:05 +0000 (14:53 +0200)]
drm/amdgpu: remove VMID first tracking
Not used any more.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Mar 2017 12:41:19 +0000 (14:41 +0200)]
drm/amdgpu: move VM related defines into amdgpu_vm.h
Try to clean up amdgpu.h.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Mar 2017 12:37:23 +0000 (14:37 +0200)]
drm/amdgpu: fix VMHUB order to match the hardware
Match our defines with what the hw uses.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 28 Mar 2017 18:00:20 +0000 (20:00 +0200)]
drm/amdgpu: drop alpha support
We will probably never see this combination.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 29 Mar 2017 10:13:54 +0000 (12:13 +0200)]
drm/ttm: add TTM_PL_FLAG_CONTIGUOUS v2
This allows drivers to specify if they need a contiguous allocation or not.
v2: use space instead of tab
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 28 Mar 2017 14:54:50 +0000 (16:54 +0200)]
drm/ttm: add io_mem_pfn callback
This allows the driver to handle io_mem mappings on their own.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 29 Mar 2017 09:47:04 +0000 (11:47 +0200)]
drm/ttm: cleanup and optimize ttm_bo_mem_compat v2
No need to implement the same logic twice. Also check if the busy placements
are identical to the already scanned placements before checking them.
v2: improve check even more as suggested by Michel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 30 Mar 2017 16:24:59 +0000 (12:24 -0400)]
drm/amdgpu/vi: add defines for KIQ packets
Make it clearer how these packets work.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 3 Apr 2017 20:56:08 +0000 (16:56 -0400)]
drm/amdgpu/soc15: Fix static checker warnings
vega10 is the only soc15 asic at the moment so these
warnings are invalid, but add a default case to silence
the warnings.
Fixes: 220ab9bd1ccf: "drm/amdgpu: soc15 enable (v3)"
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Tue, 4 Apr 2017 21:17:12 +0000 (07:17 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/media into drm-next
RCAR GEN3 DU HDMI support.
* 'drm/next/du' of git://linuxtv.org/pinchartl/media: (22 commits)
drm: rcar-du: Add HDMI outputs to R8A7795 device description
drm: rcar-du: Add DPLL support
drm: rcar-du: Skip disabled outputs
drm: rcar-du: Add Gen3 HDMI encoder support
dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindings
drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONE
drm: rcar-du: Replace manual bridge implementation with DRM bridge
drm: rcar-du: Add support for LVDS mode selection
drm: rcar-du: Use the DRM panel API
drm: rcar-du: Document the vsps property in the DT bindings
drm: rcar-du: Remove wait field from rcar_du_device structure
drm: rcar-du: Make sure the VSP is initialized on platforms that need it
drm: rcar-du: Use DRM core's atomic commit helper
drm: rcar-du: Clear handled event pointer in CRTC state
drm: rcar-du: Handle event when disabling CRTCs
drm: rcar-du: Don't open code of_device_get_match_data()
drm: rcar-du: Switch to encoder .atomic_mode_set() helper function
drm: panels: Add LVDS panel driver
drm: Add data transmission order bus flag
devicetree/bindings: display: Add bindings for two Mitsubishi panels
...
Harry Wentland [Sat, 1 Apr 2017 00:14:33 +0000 (20:14 -0400)]
drm/amdgpu: Read vram width from integrated system info table
On KB, KV, CZ we should read the vram width from integrated system
table, if we can. The NOOFCHAN in MC_SHARED_CHMAP is not accurate.
With this change we can enable two 4k displays on CZ again. This use
case was broken sometime in January when we started looking at
vram_width for bandwidth calculations instead of hardcoding this value.
v2:
Return 0 if integrated system info table is not available.
Tested-by: Roman Li <roman.li@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhang, Jerry [Wed, 29 Mar 2017 08:08:31 +0000 (16:08 +0800)]
drm/amdgpu: create a func to check vm size
break it out from the check parameters function.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Mon, 3 Apr 2017 18:41:39 +0000 (21:41 +0300)]
drm/amdgpu: Fix a NULL deref in amdgpu_vm_add_prt_cb()
We accidentally dereference "cb" if the kmalloc() fails.
Fixes: 451bc8eb8fe6 ("drm/amdgpu: fix PRT teardown on VM fini v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Mon, 3 Apr 2017 18:42:42 +0000 (21:42 +0300)]
drm/amd/powerplay: fix a couple locking issues
We should return unlock on the error path in pp_dpm_dispatch_tasks()
and there is a double lock bug in pp_dpm_set_sclk_od().
Fixes: 2a5071056e6a ("drm/amd/powerplay: add global PowerPlay mutex.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Mon, 3 Apr 2017 18:41:47 +0000 (21:41 +0300)]
drm/amd/powerplay: fix pp_dpm_get_current_power_state() (v2)
This switch statement is missing breaks.
v2: agd: break in default case as well
Fixes: 2a5071056e6a ("drm/amd/powerplay: add global PowerPlay mutex.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 30 Mar 2017 07:45:52 +0000 (15:45 +0800)]
drm/amdgpu: various cleanups for uvd/vce.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Thu, 30 Mar 2017 05:21:01 +0000 (13:21 +0800)]
drm/amdgpu: when resume failed, return error to avoid system hang.
Continuing if the GPU fails to resume will end in pain.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 30 Mar 2017 12:03:59 +0000 (14:03 +0200)]
drm/amdgpu: use a 64bit interval tree for VM management v2
This only makes a difference for 32-bit systems. The idea is to have a
fixed virtual address space size with 4-level page tables and to
minimize differences between 32 and 64-bit systems.
v2: Update commit message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kbuild test robot [Fri, 31 Mar 2017 10:15:10 +0000 (18:15 +0800)]
drm/amdgpu: fix semicolon.cocci warnings
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:133:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Acked-by: Huang Rui <ray.huang@amd.com>
CC: Huang Rui <ray.huang@amd.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 31 Mar 2017 14:51:29 +0000 (10:51 -0400)]
drm/amdgpu/powerplay: fix locking typo
Fixes: 2a5071056e6a601e ("drm/amd/powerplay: add global PowerPlay mutex.")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Koji Matsuoka [Fri, 11 Nov 2016 17:07:39 +0000 (18:07 +0100)]
drm: rcar-du: Add HDMI outputs to R8A7795 device description
Update the device description with the two available HDMI outputs.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Koji Matsuoka [Fri, 11 Nov 2016 17:07:41 +0000 (18:07 +0100)]
drm: rcar-du: Add DPLL support
The implementation hardcodes a workaround for the H3 ES1.x SoC
regardless of the SoC revision, as the workaround can be safely applied
on all devices in the Gen3 family without any side effect.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 1 Dec 2016 11:07:49 +0000 (13:07 +0200)]
drm: rcar-du: Skip disabled outputs
When a DT node connected to a DU output is disabled no bridge will ever
be instantiated for it. Skip the output in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Koji Matsuoka [Fri, 11 Nov 2016 17:07:40 +0000 (18:07 +0100)]
drm: rcar-du: Add Gen3 HDMI encoder support
The R-Car Gen3 SoCs include on-chip DesignWare HDMI encoders. Support
them with a platform driver to provide platform glue data to the dw-hdmi
driver.
The driver is a complete rewrite of code coming from the Renesas BSP,
save for the values in the PHY parameters table.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 1 Dec 2016 23:02:53 +0000 (01:02 +0200)]
dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindings
The Renesas R-Car Gen3 SoCs use a Synopsys DWC HDMI TX encoder IP. Add
corresponding device tree bindings based on the DWC HDMI TX bindings
model.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Laurent Pinchart [Fri, 7 Oct 2016 14:39:21 +0000 (17:39 +0300)]
drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONE
Unlike the connector type, the encoder type is unused by userspace. As
it is equally unused in the driver, except in a single location where
the connector type can be used instead, hardcode it to
DRM_MODE_ENCODER_NONE. This allow removing all code that tries to
determine (unsuccessfully in case a bridge is used) the encoder type.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Fri, 7 Oct 2016 13:01:41 +0000 (16:01 +0300)]
drm: rcar-du: Replace manual bridge implementation with DRM bridge
The rcar-du driver contains a manual implementation of HDMI and VGA
bridges. Use DRM bridges to replace it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
projects / openwrt / staging / blogic.git / log