git.openwrt.org Git - openwrt/staging/blogic.git/log

ASoC: ti: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

sound/soc/ti/n810.c: In function ‘n810_ext_control’:
sound/soc/ti/n810.c:48:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
   line1l = 1;
   ~~~~~~~^~~
sound/soc/ti/n810.c:49:2: note: here
  case N810_JACK_HP:
  ^~~~

sound/soc/ti/rx51.c: In function ‘rx51_ext_control’:
sound/soc/ti/rx51.c:57:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   hs = 1;
   ~~~^~~
sound/soc/ti/rx51.c:58:2: note: here
  case RX51_JACK_HP:
  ^~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Link: https://lore.kernel.org/r/20190729221534.GA18696@embeddedor
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: xtfpga-i2s: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-15-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: kirkwood-i2s: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-14-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: spear: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-13-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mxs-saif: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-12-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sirf: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-11-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: bcm2835-i2s: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-10-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_audmix: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-9-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: imx-audmux: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-8-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mt6797: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-7-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: mt8173: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-6-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ep93xx-i2s: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-5-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-4-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-3-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: tegra20_das: use devm_platform_ioremap_resource() to simplify code

Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190727150738.54764-2-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: meson: g12a-tohdmitx: override codec2codec params

So far, forwarding the hw_params of the input to output relied on the
.hw_params() callback of the cpu side of the codec2codec link to be called
first. This is a bit weak.

Instead, override the stream params of the codec2codec to link to set it up
correctly.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190729080139.32068-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Remove static table index when parsing topology

Currently when we remove and reload driver we use previous ref_count
value to start iterating over skl->modules which leads to out of table
access. To fix this just inline the function and calculate indexes
everytime we parse UUID token.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190726090929.27946-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec2codec: fix missing return of error return code

Currently in function snd_soc_dai_link_event_pre_pmu the error return
code in variable err is being set but this is not actually being returned,
the function just returns zero even when there are failures. Fix this by
returning the error return code.

Addresses-Coverity: ("Unused value")
Fixes: 3dcfb397dad2 ("ASoC: codec2codec: deal with params when necessary")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190726123327.10467-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sunxi: fix a sound binding broken reference

Address this rename:
Documentation/devicetree/bindings/sound/{sun4i-i2s.txt -> allwinner,sun4i-a10-i2s.yaml}

Fixes: 0a0ca8e94ca3 ("dt-bindings: sound: Convert Allwinner I2S binding to YAML")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/9932608f32030c886d906ea656eda8408c544776.1564140865.git.mchehab+samsung@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: davinci-mcasp: Support for correct symmetric sample bits

Implement custom snd_pcm_hw_rule to filter the available formats for the
second stream to make it symmetric and allow only formats which require
the same amount of bits on the bus as the running stream.

A simple constraint is not working correctly because for example:
the first stream is started with S24_LE

If we place 24 as constraint for the SAMPLE_BITS then the second stream
can not use S24_LE as it is physically 32bits.

If we would place 32 as constraint (physical width) then S32_LE would have
been allowed, but S24_3LE is not.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'asoc-5.3' into asoc-5.4

ASoC: ti: davinci-mcasp: Correct slot_width posed constraint

The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.

Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.

With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.

Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip: Fix mono capture

This reverts commit db51707b9c9aeedd310ebce60f15d5bb006567e0.
Revert "ASoC: rockchip: i2s: Support mono capture"

Previous discussion in

https://patchwork.kernel.org/patch/10147153/

explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.

Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.

Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Fix some acpi vs apci typo in somme comments

Fix some typo to have the filaname given in a comment match the real name
of the file.
Some 'acpi' have erroneously been written 'apci'

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode

When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.

In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.

This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.

Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec2codec: deal with params when necessary

When there is an event on codec to codec dai_link, we only need to deal
with params if the event is SND_SOC_DAPM_PRE_PMU, when .hw_params() is
called. For the other events, it is useless.

Also, dealing with the codec to codec params just before calling
.hw_params() callbacks give change to either party on the link to alter
params content in .startup(), which might be useful in some cases

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec2codec: name link using stream direction

At the moment, codec to codec dai link widgets are named after the
cpu dai and the 1st codec valid on the link. This might be confusing
if there is multiple valid codecs on the link for one stream
direction.

Instead, use the dai link name and the stream direction to name the
the dai link widget

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codec2codec: run callbacks in order

When handling dai_link events on codec to codec links, run all .startup()
callbacks on sinks and sources before running any .hw_params(). Same goes
for hw_free() and shutdown(). This is closer to the behavior of regular
dai links

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190725165949.29699-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs47l92: Add codec driver for Cirrus Logic CS47L92

Adds the codec driver for the CS47L92 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.

Signed-off-by: Stuart Henderson <stuarth@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190725163931.24964-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs47l15: Add codec driver for Cirrus Logic CS47L15

Adds the codec driver for the CS47L15 SmartCodec. This is a
multi-functional codec based on the Cirrus Logic Madera platform.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Jaswinder Jassal <jjassal@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190725163931.24964-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm_adsp: Allow bus error handler to be called directly

There is no need for end drivers to add helper functions to allow the
bus error handler to be called, simply update the prototype so it can be
called directly.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190725163931.24964-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Makefile - fix the top-level kernel module names (add snd- prefix)

Use the proper module name. The objs assignments are already there.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>0
Link: https://lore.kernel.org/r/20190725133743.22145-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: davinci-mcasp: Improve serializer handling in multi AXR setups

When multiple serializers are used we need to track the number of
serializers used by the other stream direction to avoid killing data lines
when the first stream used more serializers than the second would need.
We are still protected against the case when the second stream uses more
serializers which had affected the running stream as well.

To take advantage of the improved serializer logic we need to modify the
channel constraints rule as well to allow the use of multiple serializers
for the second stream as additional ones will not affect the FS/BCLK on
the bus.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083432.7419-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: ti: davinci-mcasp: Add support for RIGHT_J format

The formater unit's rotation needs to be programmed differently for right
aligned bus format to have the data moved to the correct place.

Take the opportunity and simplify the formater unit setup code.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083411.7211-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm3168a: Allow all channels in case of parallel DIN/DOUT setup

If multi DIN/DOUT mode is selected (tdm_slots == 2) then configure the
channel constraint to allow all channels.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083321.6776-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Cleanup skl_module_cfg declaration

With removal of MCPS, CPS and CPC ambiguity, ibs and obs params for
struct skl_module_cfg have been left unused. Update struct declaration
by removing these two.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Make MCPS and CPS params obsolete

As per FW Interface Modules Configuration, init instance IPC request
requires base initial module configuration. This configuration structure
is made of:
- cpc (chunks per cycle)
- ibs (input buffer size)
- obs (output buffer size)
- is_pages (memory pages required)
- audio_fmt (self explanatory)

Skylake topology accepts following tokens: MCPS, CPS and CPC. All of
these are directly connected. Moreover, assigning one of these allows
to calculate the remaining two. In simplest scenario and assuming 1ms
scheduling, following is true:

CPS = CPC times 1000
MCPS = CPS times 1000 000
Note: these calculations vary depending on scenario and scheduling
requirements.

Given the current implementation, userspace is allowed to provide
different values for all three causing informational chaos. On top of
that, struct skl_base_cfg which represents base module configuration,
incorrectly takes CPS param instead of CPC.

This ambiguity may lead to user unintentionally providing improper
values to DSP firmware and thus impacting module scheduling in
unexpected fashion. Fix by making MCPS and CPS topology params obsolete
and relying solely on CPC value.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Do not disable FW notifications

As per FW team recommendation we should not disable notifications.
By default, all notifications are enabled in DSP firmware. These
notifications provide a vital information whenever an error occurs.

Currently, driver disables them during boot sequences. By doing so,
Skylake may silently ignore severe stream errors.
Correct that by removing permissive code.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Remove memory available check

Current memory availability check is a stub, while actual memory
management takes place in firmware. Leave this task to firmware entirely
and remove redundant code.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Remove MCPS available check

The entire logic for MCPS calculation and DSP scheduling is found
within DSP firmware. Currently driver implements simplistic, inaccurate
logic itself which may prevent pipeline creation despite firmware being
completely fine its parameters.

Remove that logic and leave the MCPS calculation to DSP alone.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Combine snd_soc_skl_ipc and snd_soc_skl

As both modules are core part of Skylake driver and none can live
without the other, combine snd_soc_skl_ipc and snd_soc_skl.

It's highly probable IPC module was to be treated as an interface for
platform specific code implementations e.g.: possibility of existence of
BXT specific code without SKL one. However, most funtionalities are
being inherited from one DSP firmware to another, and thus this
assumption fails.

skl-sst, bxt-sst and cnl-sst are not individuals pointing respectively
to SKL (cAVS 1.5), BXT (cAVS 1.5+) & CNL (cAVS 1.8) standalone
implementations. Code found within these is shared among all platforms
whenever necessary to avoid code duplication and reduce development
burden.

Merge also helps in cleaning up internal code in future changes.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: Skylake: Merge skl_sst and skl into skl_dev struct

Skylake driver is divided into two modules:
- snd_soc_skl
- snd_soc_skl_ipc

and nothing would be wrong if not for the fact that both cannot exist
without one another. IPC module is not some kind of extension, as it is
the case for snd_hda_ext_core which is separated from snd_hda_core -
legacy hda interface. It's as much core Skylake module as snd_soc_skl
is.

Statement backed up by existence of circular dependency between this
two. To eliminate said problem, struct skl_sst has been created. From
that very momment, Skylake has been plagued by header errors (incomplete
structs, unknown references etc.) whenever something new is to be added
or code is cleaned up.

As this design is being corrected, struct skl_sst is no longer needed,
so combine it with struct skl. To avoid ambiguity when searching for skl
stuff (struct skl *skl) it has also been renamed to skl_dev.

No functional changes.

Signed-off-by: Piotr Maziarz <piotrx.maziarz@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723145854.8527-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: wm8955: Fix a typo in 'wm8995_pll_factors()' function name

This should be 'wm8955_pll_factors()' instead.
Fix it and use it.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190724052632.30476-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Fail card instantiation if DAI format setup fails

If the DAI format setup fails, there is no valid communication format
between CPU and CODEC, so fail card instantiation, rather than continue
with a card that will most likely not function properly.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c

snd_soc_dai_stream_valid() is function to check stream validity.
But, some code is using it, some code are checking stream->channels_min
directly. Doing samethings by different method is confusable.
This patch uses same funcntion for same purpose.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ftmyhmzz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-core: use existing snd_soc_dai_digital_mute()

ALSA SoC already has snd_soc_dai_digital_mute() for digital_mute,
let's use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ef2ihmzo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_compress_new()

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_compress_new() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h87ehn1a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_remove()

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_remvoe() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imruhn1x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_probe()

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_probe() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1cahn26.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_resume()

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_resume() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfwqhn2j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_suspend()

Current ALSA SoC is directly using dai->driver->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_suspend() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muh6hn2x.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_delay()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_delay() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o91mhn3i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_bespoke_trigger() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r26ihn3u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_trigger()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_trigger() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgqyhn40.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_prepare()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_prepare() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tvbehn46.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_shutdown()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_shutdown() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9vuhn4b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_startup()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_startup() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wogahn4i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: add snd_soc_dai_hw_free()

Current ALSA SoC is directly using dai->driver->ops->xxx,
thus, it has deep nested bracket, and it makes code unreadable.
This patch adds new snd_soc_dai_hw_free() and use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y30qhn4w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: soc-dai: mv soc_dai_hw_params() to soc-dai

Sometimes ALSA SoC naming is very random.
Current soc_dai_hw_params() should use snd_soc_dai_xxx() style.
And then, 1st parameter should be dai. Otherwise it is confusable.
- soc_dai_hw_params(..., dai);
+ snd_soc_dai_hw_params(dai, ...);

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhl6hn5b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: add soc-dai.c

Current ALSA SoC has many snd_soc_dai_xxx() function which is
using dai->driver->ops->xxx.
But, some of them are implemented as snd_soc_dai_xxx(),
but others are directly using dai->driver->ops->xxx.
Because of it, the code is not easy to read.

This patch creats new soc-dai.c and moves snd_soc_dai_xxx()
functions into it.
One exception is snd_soc_dai_is_dummy() which is based on
soc-utils local variable. We need to keep it as-is there.

Others which is directly using dai->driver->ops->xxx will be
implemented at soc-dai.c by incremental patches.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871ryij1r6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rsnd: Support hw_free() callback at DAI level

This patch provides the needed infrastructure to support calling hw_free()
at the DAI level. This is for example required to free resources allocated
in hw_params() callback.

The modification of __rsnd_mod_add_hw_params does not have any side
effects because rsnd_mod_ops::hw_params callback is not used by anyone
until now.

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20190722072403.11008-2-jiada_wang@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1308: Convert headers to SPDX

Convert include and source files to SPDX.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190723101247.19741-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt5665: Fix a typo in the name of a function

All function names start with rt5665_, except 'rt5655_set_verf()'.
It is likely a typo.

Fix it to be consistent.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190722212639.26954-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: fix stream id setting

snd_hdac_ext_link_clear_stream_id maps stream id to
link output, which is for playback, not capture.

Tested on Whiskey Lake platform.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: fix link DMA config

For this bug, there are two capture pcm streams active, with one
stream and its related stream tag released before suspend. Later
when system suspend is done, the stream tag for the remaining
active stream is released by SOF driver. After system resume, hda
codec driver restores the stream tag for the active pcm stream,
but SOF goes to assign a new one, which now doesn't match with the
stream tag used by codec driver, and this causes DMA to fail
receiving data, leading to unrecoverable XRUN condition in FW.

For stream tag is stored in both hda codec and SOF driver, it
shouldn't be released only in SOF driver. This patch just keeps the
stream information in dma data and checks whether there is a stored
DMA data for stream resuming from S3 and restores it. And it also
removes DMA data when the stream is released.

Tested on Whiskey Lake platform.

GitHub issue: https://github.com/thesofproject/sof/issues/1594
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl_esai: recover the channel swap after xrun

There is chip errata ERR008000, the reference doc is
(https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf),

The issue is "While using ESAI transmit or receive and
an underrun/overrun happens, channel swap may occur.
The only recovery mechanism is to reset the ESAI."

This issue exist in imx3/imx5/imx6(partial) series.

In this commit add a tasklet to handle reset of ESAI
after xrun happens to recover the channel swap.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/326035cb99975361699d9ed748054b08bc06a341.1562842206.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: ssp: BCLK delay parameter

Some codecs require BCLK to be on for some time, before sending
any data. SOF can enable BCLK and then wait for guaranteed time,
before starting DMA on SSP start.

Signed-off-by: Janusz Jankowski <janusz.jankowski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: reset link DMA state in prepare

When application goes through SUSPEND/STOP->PREPARE->START
cycle, we should always reprogram the DAI link DMA to ensure
it is in sync with the host PCM DMA.

Use same state tracking logic to handle both restart and
system resume flows. Use link_prepared field of
'struct hdac_ext_stream' to store the state, instead of
adding redundant fields to SOF specific structs.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: add a parameter to disable MSI

Enabling MSI on HDA can fail, in which case the legacy PCI IRQ mode
will be used. To make testing this mode easier add an "enable_msi"
module parameter, which is only enabled if debugging is enabled too.

Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: remove duplicated clear WAKESTS

Remove the first clear WAKESTS, only one clear is needed during init
chip.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: use SOF defined init chip in resume

Unify resume code by using SOF common function hda_dsp_ctrl_init_chip()
which can handle both HDA and non-HDA cases. Move code to reset
stream-to-link mapping into hda_dsp_ctrl_init_chip().

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: set position buffer in init chip

Set the HDA stream position buffer during init chip. The position buffer
needs to be set in both HDA codec and nocodec cases. Using SOF defined
function and move it to common code.

Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: Enable jack detection

In commit 7d4f606c50ff ("ALSA: hda - WAKEEN feature enabling for
runtime pm"), legacy HD-A driver sets hda controller in reset mode after
entering runtime-suspend. And when resuming from suspend mode, it checks
hda controller & codec status to detect headphone hotplug event. Now
this patch does the same job in SOF runtime pm functions.

And we need to check all the non-hdmi codecs for some cases like playback
with HDMI or capture with DMIC connected to dsp. In these cases, only
controller is active and codecs are suspended, so codecs can't send
unsolicited event to controller. The jack polling operation will activate
codecs and unsolicited event can work even codecs become suspended later.

Tested on whiskylake with hda codecs.

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: reduce ifdef usage for hda

Move the code for hda to one point

Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: correct ROM state mask

The ROM state is represented by the 24 LSB bits in the ROM status
register, so the mask should be 0xffffff instead of 0xf.

Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: remove unused state variable in suspend function

Remove unused and no plan to use variable from suspend function.

Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: loader: Don't ignore SRAM block types

On i.MX8 data/heap/stack is kept in System RAM so
do not ignore SRAM block types received from FW.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: loader: Use the BAR provided by FW

Make sure to use the newly introduced function snd_sof_dsp_get_bar_index
that converts the section type to appropriate BAR index.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Introduce snd_sof_dsp_get_bar_index ops

FW encapsulates information about section types (e.g DRAM, IRAM)
inside module block header. This information can be used in order
to correctly load the section to the appropriate place in memory.

SOF Linux driver needs to know for each platform how to map the
section type with the corresponding memory BAR. So, this patch
introduces get_bar_index, a new operation inside snd_sof_dsp_ops.

Intel platforms, usually load all the section in a contiguous memory
area (usually denoted by sdev->mmio_bar) so things are relatively
simple there. Anyhow, on i.MX8 IRAM and DRAM for example are mapped
to distinct BARs.

By default, if no get_bar function is provided the core implementation
will always return sdev->mmio_bar so that there will be no need for
a change to existing Intel code.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: core: increase default IPC timeouts

Increase the default timeout values for boot (100ms to 2sec) and
IPC message sending (5ms to 500ms). The values should be overridden
with values from platform data.

There is no functional need to have such short timeouts as both boot
and IPC send errors are considered fatal errors. More relaxed timeouts
are convenient when running the driver on top of emulation such as QEMU.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc: use timeout configured at probe

Do not hardcode IPC timeout value in ipc.c, but rather use the timeout
value configured during device probe. For platforms that do not override
the IPC timeout, default value TIMEOUT_DEFAULT_IPC_MS has already been
defined in core.c.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: use common code to send PCM_FREE IPC

Remove duplicated code by using a common helper function
to send the PCM_FREE IPC message to FW.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: reset DMA state in prepare

When application goes through SUSPEND/STOP->PREPARE->START
cycle, we should always reprogram the SOF device to start
DMA from a known state so that hw_ptr/appl_ptrs remain valid.
This is expected by ALSA core as it resets the buffer
state as part of prepare (see snd_pcm_do_prepare()).

Fix the issue by forcing reconfiguration of the FW with
STREAM_PCM_PARAMS in prepare(). Use combined logic to handle
prepare and the existing flow to reprogram hw-params after
system suspend.

Without the fix, first call to pcm pointer() will return
an invalid hw_ptr and application may immediately observe XRUN
status, unless "start_threshold" SW parameter is set to maximum
value by the application.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: pci: mark last_busy value at runtime PM init

If last_busy value is not set at runtime PM enable, the device will be
suspend immediately after usage counter is 0. Set the last_busy value to
make sure delay is working at first boot up.

Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: pcm3168a: Fix a typo in the name of a constant

There is a typo in PCM1368A_MAX_SYSCLK, it should be PCM3168A_MAX_SYSCLK
(1 and 3 switched in 3168)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190722211528.26600-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread

Downgrade "nothing to do in IRQ thread" message from error to a debug
message in the IPC interrupt handler thread.

The spurious wake-up can happen if a HDA stream interrupt is
raised while the IPC interrupt thread is running. IPC functionality
is not impacted by this condition, so debug is a more appropriate
trace level.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links

apq8016_sbc_parse_of() sets up multiple DAI links, depending on the
number of nodes in the device tree. However, at the moment
CPU and platform components are only allocated for the first link.
This causes an oops when more than one link is defined:

Internal error: Oops: 96000044 [#1] SMP
CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4
Call trace:
apq8016_sbc_platform_probe+0x1a8/0x3f0
platform_drv_probe+0x50/0xa0
...

Move the allocation inside the loop to ensure that each link is
properly initialized.

Fixes: 98b232ca9e0e ("ASoC: qcom: apq8016_sbc: use modern dai_link style")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: madera: Read device tree configuration

Read the configuration of the Madera ASoC driver from device tree.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722135209.30302-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: dapm: fix a memory leak bug

In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in
dapm_cnew_widget() to hold the new dapm widget. Then, different actions are
taken according to the id of the widget, i.e., 'w->id'. If any failure
occurs during this process, snd_soc_dapm_new_control_unlocked() should be
terminated by going to the 'request_failed' label. However, the allocated
kernel buffer is not freed on this code path, leading to a memory leak bug.

To fix the above issue, free the buffer before returning from
snd_soc_dapm_new_control_unlocked() through the 'request_failed' label.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sgtl5000: Fix charge pump source assignment

If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-7-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sgtl5000: Fix of unmute outputs on probe

To enable "zero cross detect" for ADC/HP, change
HP_ZCD_EN/ADC_ZCD_EN bits only instead of writing the whole
CHIP_ANA_CTRL register.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-6-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sgtl5000: add ADC mute control

This control mute/unmute the ADC input of SGTL5000
using its CHIP_ANA_CTRL register.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-5-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sgtl5000: Fix definition of VAG Ramp Control

SGTL5000_SMALL_POP is a bit mask, not a value. Usage of
correct definition makes device probing code more clear.

Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-4-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: sgtl5000: Improve VAG power and mute control

VAG power control is improved to fit the manual [1]. This patch fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.

I.e. after boot:
  - Connect sound source to Line-In jack;
  - Connect headphone to HP jack;
  - Run following commands:
  $ amixer set 'Headphone' 80%
  $ amixer set 'Headphone Mux' LINE_IN

Change VAG power on/off control according to the following algorithm:
  - turn VAG power ON on the 1st incoming event.
  - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
  - turn VAG power OFF when there is the latest consumer's pre-down event
    come.
  - always delay after VAG power OFF to avoid pop.
  - delay after VAG power ON if the initiative consumer is Line-In, this
    prevents pop during line-in muxing.

According to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Cc: stable@vger.kernel.org
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Define a set of DAPM pre/post-up events

Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.

Cc: stable@vger.kernel.org
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rockchip-max98090: Remove MICBIAS as supply of input pin IN34

Commit ec0d23b295b9 ("ASoC: rockchip-max98090: Fix the Headset Mic
route.") moved the MICBIAS widget to supply Headset Mic but forget to
remove the MICBIAS widget to supply IN34 which is not really needed, so
remove that path so we have:

IN34 <==== Headset MIC <==== MICBIAS

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20190719180558.11459-1-enric.balletbo@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: cs47l35: Use define for DSPCLK enable bit

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190722093516.12906-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1308: add silence detection and manual PDB control

We enable the silence detection function in initial settings.
PDB control changes to manual mode, hence the driver could
fully control the AMP output on/off.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190719063249.18806-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: rt1308: simplify the EFUSE read function

The rt1308_efuse function contains many redundant settings.
We remove the redundant settings and the function still works.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190719063235.18757-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>