backports: remove shmem_read_mapping_page_gfp()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove cpufreq_quick_get_max()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove i2c_bit_algo()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove compat_wake_up_locked()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove devm_regmap_init_spi()

This is not used by any code in backports, not even a DRM driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove ktime_get_monotonic_offset()

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove scatterlist

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove some stuff related to MTRR

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove more hdmi stuff

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove BACKPORT_BUILD_HDMI

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove BACKPORT_BUILD_RADIX_HELPERS

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove CPTCFG_BACKPORT_BUILD_WW_MUTEX

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove BACKPORT_BUILD_CROSS_RESERVATION

This was only needed for some of the DRM drivers, remove it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove platform drivers

The platform drivers were only needed by some DRM drivers and are not
needed any more with the DRM driver being removed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove DRM driver

Maintaining the DRM driver takes a lot of recourses as there they are
depending on many API changes done to the core kernel code and
currently we do not have that many recourses to follow them. On the
other side one needs also new userspace drivers to make use of the new
features added to the DRM kernel drivers and it is not easy to update
the X drivers. Therefore we came to the conclusion to remove the drm
drivers for now.

There were also some problems with some DRM drivers, like the Intel
i915 driver caused kernel panic on some systems and was probably only
usable on some very recent kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: update test kernel versions

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches on next-20130822

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.98              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.14             [  OK  ]
19  3.11.3              [  OK  ]
20  3.12-rc3            [  FAIL  ]
21  3.2.51              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.64              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: remove reading of consumed energy from sysfs

MSR_RAPL_POWER_UNIT is not available on older kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add tty_port_tty_hangup()

This is needed by ./net/bluetooth/rfcomm/tty.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add tty_port_tty_wakeup()

This is needed by ./net/bluetooth/rfcomm/tty.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: copy include/drm/drm_flip_work.h

This file was newly added to drm.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: backport new sysfs api in media

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add DEVICE_ATTR_RW

This is used by drivers/media/v4l2-core/v4l2-dev.c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches for next-20130816

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.89              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.5              [  OK  ]
19  3.11-rc4            [  OK  ]
20  3.2.50              [  OK  ]
21  3.3.8               [  OK  ]
22  3.4.56              [  OK  ]
23  3.5.7               [  OK  ]
24  3.6.11              [  OK  ]
25  3.7.10              [  OK  ]
26  3.8.13              [  OK  ]
27  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not build REGULATOR_PALMAS on older kernel versions.

REGULATOR_PALMASi now needs some symbols form headers of very recent
kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add debugfs_create_x64()

This adds debugfs_create_x64() by calling debugfs_create_u64() instead.
The 64 bit number is then not hex, but dec formated in debug fs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: do not use DMA SG on old kernel versions

the usb net driver now uses the dma sg api which is not available on
old kernels, this patch removed the usage of the dma sg api for old
kernel versions.

This backports the following upstream commit:
commit 638c5115a794981441246fa8fa5d95c1875af5ba
Author: Ming Lei <ming.lei@canonical.com>
Date:   Thu Aug 8 21:48:24 2013 +0800

    USBNET: support DMA SG

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: use old led api on old kernel versions.

Usage of a new led api was introduced in mac80211, this patch make
backports use the old api on older kernel versions. This could cause a
problem with the led, the transmit led could stay on if nothing is
transfered.

This backports the following upstream commit:
commit e47f2509e5f182f4df144406de6f2bc78179d57e
Author: Fabio Baltieri <fabio.baltieri@gmail.com>
Date:   Thu Jul 25 12:00:26 2013 +0200

    mac80211: use oneshot blink API for LED triggers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: replace new portid usage

In this upstream commit a new usage of portid was introduced:
commit ac22ac466a659f1b2e02a2e2ee23fc5c42da2c95
Author: Samuel Ortiz <sameo@linux.intel.com>
Date:   Wed Jul 24 18:10:50 2013 +0200

    NFC: Add a GET_SE netlink API

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: refresh patches for next-20130809

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.89              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10.5              [  OK  ]
19  3.11-rc4            [  OK  ]
20  3.2.50              [  OK  ]
21  3.3.8               [  OK  ]
22  3.4.56              [  OK  ]
23  3.5.7               [  OK  ]
24  3.6.11              [  OK  ]
25  3.7.10              [  OK  ]
26  3.8.13              [  OK  ]
27  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: REGULATOR_DA9210 needs at least kernel 3.5

This drivers needs some new members in the regulator structure.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add HDMI_INFOFRAME_SIZE

Add the missing define.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add hdmi_infoframe_pack()

This adds the missing function hdmi_infoframe_pack() for kernels where
the HDMI subsystem is not backported, like all kernel >= 3.9.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: add include/drm/drm_agpsupport.h

This adds the missing file include/drm/drm_agpsupport.h

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

backports: fix intel i915 drm driver

The intel i915 drm driver uses the declarations from intel-gtt.h to
interact with drivers/char/agp/intel-gtt.c which is not
backported by backports project. To prevent some strange problems when
using i915, use the headers from the kernel and do not use our own. This
causes some compile problems which where runtime problems before and
bumps the minimal kernel version to 3.7.

This i915 still crash on my device with kernel 3.7.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: add ending slash to upload path

the filename in kup put should end with a slash otherwise it tried to
overwrite this file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: log kup command before executing

Add a logging of the next command to be executed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: fix directory creating

The full path has to be provided not just the new directory to create.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: do not add full path into tar

dir_to_tar could be the absolute path to the directory to to tar, but
we do not want the full patch in the tar, just the basename.
In addition the second close is not necessary.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gentree.py: add kernel upload support

This streamlines our release process making it easier for
transitioning releases onto other backport developers.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpkup.py: add or own kernel uploader helper lib

kup is written in perl, add some basic python interfaces
for it to allow us to upload to kernel.org backport
releases.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgpg.py: add simple gpg helper for gpg signing

Note that kup expects --armor --detach-sign, we'll pass that
as part of our extra_args. The python gpg lib doesn't provide
support for random arguments as this one, so just add our
own little helper and carry it over.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add support for git paranoia

This cleans sanitizes a source tree and ensures
no content is present from what was intended.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add git tree verification support

This verifies that the tree provided has its last commit
both tagged and also digitally signed. In short it does:

  git tag -v $(git describe --dirty)

This will be used later.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add git clean support

We'll use this later.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: add git status support

We use --porcelain given that this spits out the results
in an easy-to-parse format for scripts and will remain stable
across git versions and regardless of user configuration.

We will use this later.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

lib/bpgit.py: enable extra arguments on git describe

This lets us throw at it whatever extra stuff we want.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add missing returns on ww_mutex backpots

Two returns were missing on the ww_mutex backport, add these.
The enhancements are not supported on older kernels so just
bail out early.

Tested against next-20130802

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.79              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10-rc1            [  OK  ]
19  3.2.45              [  OK  ]
20  3.3.8               [  OK  ]
21  3.4.46              [  OK  ]
22  3.5.7               [  OK  ]
23  3.6.11              [  OK  ]
24  3.7.10              [  OK  ]
25  3.8.13              [  OK  ]
26  3.9.3               [  OK  ]

real    34m47.935s
user    938m15.592s
sys     130m11.724s

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh patches for next-20130802 again

For some reason some other changes were picked up again now.

== ckmake-report.log ==

1   2.6.25              [  OK  ]
2   2.6.26              [  OK  ]
3   2.6.27              [  OK  ]
4   2.6.28              [  OK  ]
5   2.6.29              [  OK  ]
6   2.6.30              [  OK  ]
7   2.6.31              [  OK  ]
8   2.6.32              [  OK  ]
9   2.6.33              [  OK  ]
10  2.6.34              [  OK  ]
11  2.6.35              [  OK  ]
12  2.6.36              [  OK  ]
13  2.6.37              [  OK  ]
14  2.6.38              [  OK  ]
15  2.6.39              [  OK  ]
16  3.0.79              [  OK  ]
17  3.1.10              [  OK  ]
18  3.10-rc1            [  OK  ]
19  3.2.45              [  OK  ]
20  3.3.8               [  OK  ]
21  3.4.46              [  OK  ]
22  3.5.7               [  OK  ]
23  3.6.11              [  OK  ]
24  3.7.10              [  OK  ]
25  3.8.13              [  OK  ]
26  3.9.3               [  OK  ]

real    34m47.737s
user    937m23.708s
sys     129m50.928s

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backport: simplify #ifdefs in pci-aspm.h

Just use #else instead of two conditionals.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add generic semaphore.h

Matthew generalized the semaphore implementation and part of
that collateral evolution consisted of changing the header
used for the expected routines from asm/semaphore.h to
linux/semaphore.h.

mcgrof@garbanzo ~/linux-next (git::master)$ git describe --contains \
64ac24e738823161693bf791f87adc802cf529ff
v2.6.26-rc1~1155^2~5

commit 64ac24e738823161693bf791f87adc802cf529ff
Author: Matthew Wilcox <matthew@wil.cx>
Date:   Fri Mar 7 21:55:58 2008 -0500

    Generic semaphore implementation

    Semaphores are no longer performance-critical, so a generic C
    implementation is better for maintainability, debuggability and
    extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
    warning.  Thanks to Harvey Harrison for pointing out that the
    unlikely() was unnecessary.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix compilation for 2.6.25 for math64 header

We need to ifdef correctly before assuming we can include that
header.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: do not depend on PCI functions when PCI is disabled in the kernel

This should prevent some compile errors when backports is used with a
kernel without PCI support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix typo in define

This fixes a build error one some non x86 systems.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: remove alx patch for < 2.6.24

Since we don't support kernels before 2.6.24 anymore
there's no need to carry this patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

remove support for kernel 2.6.24

By requiring 2.6.25 we can get rid of quite a lot of backport work.
2.6.25 was released more than five years ago (April 2011) and wasn't
a long-term kernel either, so there's little point in supporting it
now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backport: backport device_move() properly

This was causing conflicts again when updating against
wireless-next, so instead of adjusting the patches just
provide a proper static inline backport.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: Actually export the 2.6.34 sdio compat symbols

sdio_get_host_pm_caps() and sdio_set_host_pm_flags() were defined
in compat-2.6.34 but not actually exported for other modules to use.

The cw1200 driver needs sdio_set_host_pm_flags() properly exported.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix conflict in swiotlb_nr_tbl() on RHEL 6.4

The RedHat kernel also provides a implementation for swiotlb_nr_tbl(),
us that one on these kernels.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh patches on next-20130802

== ckmake-report.log ==

1   2.6.24              [  OK  ]
2   2.6.25              [  OK  ]
3   2.6.26              [  OK  ]
4   2.6.27              [  OK  ]
5   2.6.28              [  OK  ]
6   2.6.29              [  OK  ]
7   2.6.30              [  OK  ]
8   2.6.31              [  OK  ]
9   2.6.32              [  OK  ]
10  2.6.33              [  OK  ]
11  2.6.34              [  OK  ]
12  2.6.35              [  OK  ]
13  2.6.36              [  OK  ]
14  2.6.37              [  OK  ]
15  2.6.38              [  OK  ]
16  2.6.39              [  OK  ]
17  3.0.89              [  OK  ]
18  3.1.10              [  OK  ]
19  3.10.5              [  OK  ]
20  3.11-rc4            [  OK  ]
21  3.2.50              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.56              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: Atheros atl1c needs build_skb(), do not build on < 3.5

The Atheros atl1c driver now uses build_skb() which was added in 3.5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: USB_SPEED_SUPER was added in 2.6.31

Now usbnet.c uses it and fails on kernel 2.6.30 without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: use genl_info_snd_portid() at an other place.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add sysfs api backport for ieee802154

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: REGULATOR_DA903X does not build on kernel < 3.12

REGULATOR_DA903X now uses a new struct member added with kernel 3.12

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add defconfig for cw1200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh on next-20130726

== ckmake-report.log ==

1   2.6.24              [  OK  ]
2   2.6.25              [  OK  ]
3   2.6.26              [  OK  ]
4   2.6.27              [  OK  ]
5   2.6.28              [  OK  ]
6   2.6.29              [  OK  ]
7   2.6.30              [  OK  ]
8   2.6.31              [  OK  ]
9   2.6.32              [  OK  ]
10  2.6.33              [  OK  ]
11  2.6.34              [  OK  ]
12  2.6.35              [  OK  ]
13  2.6.36              [  OK  ]
14  2.6.37              [  OK  ]
15  2.6.38              [  OK  ]
16  2.6.39              [  OK  ]
17  3.0.89              [  OK  ]
18  3.1.10              [  OK  ]
19  3.10.5              [  OK  ]
20  3.11-rc4            [  OK  ]
21  3.2.50              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.56              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport pci power save for mwifiex

This patch makes mwifiex use the old suspend resume functions on older
kernels.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: do not access hw_features in wil6210

wil6210 now uses netdev->hw_features which is not available in all
kernel versions, do not set it then.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add some new regulator drivers to default config

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: backport sysfs api in wireless

Older kernel versions do not support the new sysfs api with dev_groups.
This makes net/wireless/sysfs.c use the old api on older kernels.

This is a backport of this commit:
commit f0bc99c84349ce87af5b35839d19bfb17bb9b27f
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date:   Wed Jul 24 15:05:35 2013 -0700

    net: wireless: convert class code to use dev_groups

This was mostly done by Johannes Berg <johannes@sipsolutions.net>.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add include/linux/regulator/pfuze100.h

This is a new driver which needs a new header file.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add hid_alloc_report_buf()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: do not copy wrong header files for regulators

Some of the header files for the regulators framework where used by
regulator core, which does not get backported or some of them are also
used by mfd drivers. Now only the headers which are only used by the
regulator driver are copied, it could still be that these headers are
also used in some platform specific code where the driver gets
registered.
This patch then fixed some dependencies which where wrong because of
using the wrong header files.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add missing include for is_valid_ether_addr()

is_valid_ether_addr() is used, but the header here it is declared was
not included.

This fixes a problem introduced in commit:
commit 521acfd92f168fc9b8b6a1cefe9a165243f3d872
Author: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Date:   Thu Aug 15 14:40:09 2013 +0200

    backports: add eth_prepare_mac_addr_change() and eth_commit_mac_addr_change()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: usb_translate_errors() is needed for < 3.2

usb_translate_errors() is needed for every kernel < 3.2 and not <
2.6.39.

This fixes a problem introduced in this commit:
commit aee2dc1d7fd03d3900e06e88793b519e21049de0
Author: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Date:   Thu Aug 15 14:40:20 2013 +0200

    backports: add usb_translate_errors()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix conditional include of arch_phys_wc_add()

This fixes a problem introduced in this commit:
commit c871780b5afa182878884bf5ccd8df4817a2660f
Author: Arik Nemtsov <arik@wizery.com>
Date:   Wed Aug 14 10:48:05 2013 +0300

    backports: rename some mem functions to not break custom kernels

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: cw1200 needs the multicast API changes to support <=2.6.35

Also, update the dependencies:

 cw1200_wlan_sdio needs >=2.6.34 due to missing sdio_set_host_pm_flags()
 cw1200_wlan_spi needs >=2.6.35 due to missing request_any_context_irq()

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: cw1200 utilizes kthreads for <= 2.6.35

The new workqueue APIs in 2.6.36 allowed us to scrap the old kthread worker
that had been used; unfortunately the backported API isn't complete so
in order to support older kernels, resurrect this patch.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: move the cw1200 sdio quirk into 26-sdio-quirks

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backport: Add an implementation of get_random_int() for <3.10 kernels.

get_random_int() was present, but simply not exported for use in modules
until 3.10.  Implement it in terms of the more expensive get_random_bytes()

This is needed by the cw1200 driver.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: rename some mem functions to not break custom kernels

When custom patches are cherry-picked to a kernel, some symbols exported
by backports may clash with the built-in ones. Rename the backports
symbols using the standard backport_ prefix to prevent that.

The offending symbols were exported by the patch below:

commit 2ce5c22448bb45998318267c00b5d6ef9cff3170
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date:   Thu Jun 6 13:48:04 2013 +0200

    backports: backport some memory functions

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: Add patch for cw1200_sdio with kernels < 3.2

Without this patch, the hardware *will* hang on <3.2 kernels when a
512-byte SDIO transfer occurs.

3.2-rc added an SDIO quirk to work around this, so this code was
stripped from the driver when committed to the mainline.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: Include drivers/net/wireless/cw1200

The cw1200 WLAN driver was added in 3.11-rc; include it in backports.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add defconfig for wwan device drivers

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add wwan device drivers

Add cdc_mbim, cdc_ncm, sierra_net, qmi_wwan device drivers.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: define phys_addr_t for ARM on kernel version < 2.6.25

phys_addr_t is not defined on ARM systems if kernel version < 2.6.25.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: include headers directly if math64 header is missing

If math64 header is not available, include div64.h directly. It is required for
do_div() that is used inside the backport version of math64.h.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: update enum usb_device_speed with USB_SPEED_SUPER

USB_SPEED_SUPER is missing for kernel versions < 2.6.30 but used by uvc_video and
usbnet.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add usb_endpoint_maxp()

This function is missing for kernel version < 3.2 but required by uvc_video
and cdc-wdm device drivers.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add usb_translate_errors()

This inline function is missing for version < 2.6.39 but required by em28xx
and cdc-wdm device driver.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: define PM_EVENT_AUTO

This macro is missing for < 2.6.25

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add eth_prepare_mac_addr_change() and eth_commit_mac_addr_change()

These functions are required by qmi_wwan device driver.

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix build errors for old kernel versions without PCI support

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: fix device_release_driver

The new macro, introduced by

commit 9f5876fa9cfb8cd6f450c200043ca7e31915f976
Author: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Date:   Thu Jul 18 16:40:55 2013 -0700

    backports: backport drvdata = NULL core driver fixes

evaluates its argument multiple times, causing crashes as
there are potential side-effects of the called code and/or
the arguments.

Fix this by converting it to static inlines.

Also remove the driver_probe_device() macro that has the
same issue, but tries to wrap a function that isn't even
available outside the driver core code in any kernel.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: refresh patches for next-20130719

== ckmake-report.log ==

1   2.6.24              [  OK  ]
2   2.6.25              [  OK  ]
3   2.6.26              [  OK  ]
4   2.6.27              [  OK  ]
5   2.6.28              [  OK  ]
6   2.6.29              [  OK  ]
7   2.6.30              [  OK  ]
8   2.6.31              [  OK  ]
9   2.6.32              [  OK  ]
10  2.6.33              [  OK  ]
11  2.6.34              [  OK  ]
12  2.6.35              [  OK  ]
13  2.6.36              [  OK  ]
14  2.6.37              [  OK  ]
15  2.6.38              [  OK  ]
16  2.6.39              [  OK  ]
17  3.0.89              [  OK  ]
18  3.1.10              [  OK  ]
19  3.10.5              [  OK  ]
20  3.11-rc4            [  OK  ]
21  3.2.50              [  OK  ]
22  3.3.8               [  OK  ]
23  3.4.56              [  OK  ]
24  3.5.7               [  OK  ]
25  3.6.11              [  OK  ]
26  3.7.10              [  OK  ]
27  3.8.13              [  OK  ]
28  3.9.11              [  OK  ]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: deactivate REGULATOR_WM8400

This needs regulator_map_voltage_linear_range() and
regulator_list_voltage_linear_range() which are not exported by the
kernel regulator framework.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add of_find_node_by_name() if !CONFIG_OF

The old kernel only exports this function when CONFIG_OF is set, but not
when CONFIG_OF is not set.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: add hid log functions

This adds some hid log functions like hid_warn().

This backports the following commit:
commit 4291ee305e9bb0699504a66f0e2b7aefcf0512a5
Author: Joe Perches <joe@perches.com>
Date:   Thu Dec 9 19:29:03 2010 -0800

    HID: Add and use hid_<level>: dev_<level> equivalents

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

backports: try to backport acpi_video_register_with_quirks()

Original the i915 driver called acpi_video_register(), but that was
replaced with acpi_video_register_with_quirks(), which we can not
backport easily, replace it with the old call to
acpi_video_register() again.

Thos backports the following commit:
commit 8c5bd7adb2ce47e6aa39d17b2375f69b0c0aa255
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date:   Thu Jul 18 02:08:06 2013 +0200

    ACPI / video / i915: No ACPI backlight if firmware expects Windows 8

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>