John Crispin [Mon, 1 Sep 2014 13:21:56 +0000 (13:21 +0000)]
ar71xx: use ETH_ALEN for consistency
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Backport of r42280
SVN-Revision: 42381
John Crispin [Mon, 1 Sep 2014 13:21:55 +0000 (13:21 +0000)]
ar71xx: enable sysupgrade for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Backport of r42279
SVN-Revision: 42380
John Crispin [Mon, 1 Sep 2014 13:21:54 +0000 (13:21 +0000)]
package/*: remove useless explicit set of function returncode
somebody started to set a function returncode in the validation
stuff and everybody copies it, e.g.
myfunction()
{
fire_command
return $?
}
a function automatically returns with the last returncode,
so we can safely remove the command 'return $?'. reference:
http://tldp.org/LDP/abs/html/exit-status.html
"The last command executed in the function or script determines the exit status."
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
Backport of r42278
SVN-Revision: 42379
John Crispin [Mon, 1 Sep 2014 13:21:52 +0000 (13:21 +0000)]
ramips: enable second SPI for VoCore
This patch enables the second SPI as spidev and also fixes some typos.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42277
SVN-Revision: 42378
John Crispin [Mon, 1 Sep 2014 13:21:51 +0000 (13:21 +0000)]
ramips: Add support for SPI_CS1 pinmux
This patch adds support for setting SPI_CS1 as Chip Select, Watchdog reset output and GPIO#27.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r41938
SVN-Revision: 42377
John Crispin [Mon, 1 Sep 2014 13:21:49 +0000 (13:21 +0000)]
ramips: Add support for VoCore
This is based and tested on VoCore Alpha, but other stuff like status/eth LEDs are present on the final board revision + VoDock.
All GPIOs are exported, except spi/i2c.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r41939
SVN-Revision: 42376
John Crispin [Mon, 1 Sep 2014 13:21:48 +0000 (13:21 +0000)]
ramips: second spi device on rt5350
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.
I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42276
SVN-Revision: 42375
John Crispin [Mon, 1 Sep 2014 13:21:46 +0000 (13:21 +0000)]
firewall: the firewall did not start properly on boot
https://dev.openwrt.org/ticket/17593
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42233
SVN-Revision: 42374
John Crispin [Mon, 1 Sep 2014 13:21:45 +0000 (13:21 +0000)]
libubox: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42230
SVN-Revision: 42373
John Crispin [Mon, 1 Sep 2014 13:21:44 +0000 (13:21 +0000)]
valgrind: fix build failure on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>
Backport of r42229
SVN-Revision: 42372
John Crispin [Mon, 1 Sep 2014 13:21:42 +0000 (13:21 +0000)]
brcm47xx: image: build alternative TRX using less optimized LZMA
There is a group of devices that lzma-loader doesn't work with. They
simply hang at "Starting program at 0x80001000" which is really hard to
debug and we didn't find any solution for this for years.
Broadcom doesn't use lzma-loader on these devices anyway. They decided
to drop lzma-loader and use less optimal LZMA compression that can be
handled by CFE itself (it doesn't use dictionary).
So support these devices we will need kernel compressed with different
parameters and trx without a loader.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r42205
SVN-Revision: 42371
John Crispin [Mon, 1 Sep 2014 13:21:40 +0000 (13:21 +0000)]
ramips: Add support for Omnima MiniPlug
This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash
Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>
Backport of r42200
SVN-Revision: 42370
John Crispin [Mon, 1 Sep 2014 13:21:38 +0000 (13:21 +0000)]
gmp: add host compile
Currently, any package that uses host compile and depends on
libgmp.so will fail. This is because gmp is not compile for
host machine. So, staging_dir/host has only static lib for gmp
$ ls staging_dir/host/lib/libgmp* -1
staging_dir/host/lib/libgmp.a
staging_dir/host/lib/libgmp.la
staging_dir/host/lib/libgmpxx.a
staging_dir/host/lib/libgmpxx.la
Addind host compile in gmp, the dependent package can use:
PKG_BUILD_DEPENDS:=gmp/host
That will compile gmp to staging_dir/host with *.so files
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r42196
SVN-Revision: 42369
John Crispin [Mon, 1 Sep 2014 13:21:36 +0000 (13:21 +0000)]
busybox: Fix pam_start link errors when PAM support is enabled
Patch to BusyBox Makefile to fix linker errors when PAM support is enabled by
CONFIG_BUSYBOX_CONFIG_PAM=y. Typical errors include:
login.c:(.text.login_main+0x122): undefined reference to `pam_start'
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Backport of r42195
SVN-Revision: 42368
John Crispin [Mon, 1 Sep 2014 13:21:34 +0000 (13:21 +0000)]
ar71xx: TL-WR1043N/ND v2: Fix MAC address of WMAC
This sets the MAC address of the WLAN interface to the "official" primary MAC
address (the one on the label under the devices, and the one used with the stock
firmware). The MAC address used so far (primary-1) isn't even used at all with
the stock firmware, which sets (primary) on LAN and WLAN and (primary+1) on the
WAN interface (like OpenWrt does with this patch).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r42193
SVN-Revision: 42367
John Crispin [Mon, 1 Sep 2014 13:21:32 +0000 (13:21 +0000)]
ralink: clean up HAME profiles, remove unnecessary packages.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Backport of r42192
SVN-Revision: 42366
John Crispin [Mon, 1 Sep 2014 13:21:31 +0000 (13:21 +0000)]
ramips: add mpr-a1 to default profile
Add hame mpr-a1 to default ramips profile.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Backport of r42191
SVN-Revision: 42365
John Crispin [Mon, 1 Sep 2014 13:21:29 +0000 (13:21 +0000)]
ar71xx: build factory image for EnGenius ESR900 and ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Backport of r42189
SVN-Revision: 42364
John Crispin [Mon, 1 Sep 2014 13:21:27 +0000 (13:21 +0000)]
ar71xx: Fix 2.4G WiFi LED of the OpenMesh MR600 board
The OpenMesh MR600(v1) can only enable the 2.4G WiFi PHY LED through the
mini-PCIe device. Not configuring the LED pin inside the platform data
makes it impossible to configure it through any standard OpenWrt tool.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r42184
SVN-Revision: 42363
John Crispin [Mon, 1 Sep 2014 13:21:25 +0000 (13:21 +0000)]
lantiq: generate unique ARV7519RW22 firmware
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42183
SVN-Revision: 42362
John Crispin [Mon, 1 Sep 2014 13:21:23 +0000 (13:21 +0000)]
lantiq: add support for xrx200 firmware depending on soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42182
SVN-Revision: 42361
John Crispin [Mon, 1 Sep 2014 13:21:21 +0000 (13:21 +0000)]
lantiq: export soc type
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42181
SVN-Revision: 42360
John Crispin [Mon, 1 Sep 2014 13:21:19 +0000 (13:21 +0000)]
lantiq: improve ARV7519RW22 support
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42180
SVN-Revision: 42359
John Crispin [Mon, 1 Sep 2014 13:21:17 +0000 (13:21 +0000)]
ramips: add a workaround to fix failsafe on RT5350
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Backport of r42179
SVN-Revision: 42358
John Crispin [Mon, 1 Sep 2014 13:21:15 +0000 (13:21 +0000)]
ramips: enable additional GPIOs on HAME MPR-A1
According to the pcb tracing results[1] by anton.rad[2] MPR-A1s expose
6 unused GPIOs, only one of them working as configured in the current
DTS. This patch enables GPIO22-26.
Tested on hardware.
[1] http://i.imgur.com/kHVW2Ox.jpg
[2] https://forum.openwrt.org/viewtopic.php?pid=222698#p222698
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Backport of r42178
SVN-Revision: 42357
John Crispin [Mon, 1 Sep 2014 13:21:13 +0000 (13:21 +0000)]
ar71xx: changed the EnGenius ESR900 mtdparts to match that of the ESR1750 since they have the same flash layout
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Backport of r42177
SVN-Revision: 42356
John Crispin [Mon, 1 Sep 2014 13:21:11 +0000 (13:21 +0000)]
ppp: enable IPv6CP by default
Signed-off-by: Steven Barth <steven@midlink.org>
Backport of r42158
SVN-Revision: 42355
John Crispin [Mon, 1 Sep 2014 13:21:09 +0000 (13:21 +0000)]
firewall: fix potential NULL pointer access
Properly skip struct ifaddr entries with NULL ifa_addr, thanks Kostas Papadopoulos for reporting.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42138
SVN-Revision: 42354
John Crispin [Mon, 1 Sep 2014 13:21:07 +0000 (13:21 +0000)]
firewall: implement selective conntrack flushing (#10225)
Utilize the new selective conntrack flushing facility to clear
out active conntrack entries referring to old IP addresses after
a firewall reload.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42114
SVN-Revision: 42353
John Crispin [Mon, 1 Sep 2014 13:21:05 +0000 (13:21 +0000)]
build: enable PER_FEED_REPO by default
Enable the separate feed repositories by default to align custom builds with the repositories
available on the snapshot download server.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42112
SVN-Revision: 42352
John Crispin [Mon, 1 Sep 2014 13:21:04 +0000 (13:21 +0000)]
hostapd: fix some whitespaces
Signed-off-by: Luka Perkov <luka@openwrt.org>
Backport of r42111
SVN-Revision: 42351
John Crispin [Mon, 1 Sep 2014 13:21:02 +0000 (13:21 +0000)]
broadcom-wl: add default tx and rx antennas
This adds default tx and rx antennas, so that LuCI shows automatic as the default radio option for the antennas.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Backport of r42085
SVN-Revision: 42350
Felix Fietkau [Sun, 31 Aug 2014 13:09:15 +0000 (13:09 +0000)]
netifd: update to the latest version, adds interface cleanup fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42345
SVN-Revision: 42347
Felix Fietkau [Sun, 31 Aug 2014 13:09:14 +0000 (13:09 +0000)]
netifd: update to the latest version, fixes proto-shell teardown after renew
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42344
SVN-Revision: 42346
Felix Fietkau [Sun, 31 Aug 2014 12:04:22 +0000 (12:04 +0000)]
nettle: disable mips16 support to improve performance
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Backport of r42341
SVN-Revision: 42342
Felix Fietkau [Sun, 31 Aug 2014 11:06:48 +0000 (11:06 +0000)]
imagebuilder: remove postinst files before generating image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42339
SVN-Revision: 42340
Jonas Gorski [Sat, 30 Aug 2014 11:04:19 +0000 (11:04 +0000)]
BB: binutils: link libbfd and libopcodes dynamically again
Backport of r42337.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42338
Felix Fietkau [Fri, 29 Aug 2014 20:41:20 +0000 (20:41 +0000)]
mac80211: fix crash when unloading drivers (#17706)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42329
SVN-Revision: 42330
Felix Fietkau [Fri, 29 Aug 2014 11:37:50 +0000 (11:37 +0000)]
tools/libtool: add missing dependency on m4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42322
SVN-Revision: 42323
Felix Fietkau [Wed, 27 Aug 2014 09:52:44 +0000 (09:52 +0000)]
tools/bc: add missing dependency on bison
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42309
SVN-Revision: 42311
Felix Fietkau [Wed, 27 Aug 2014 09:52:43 +0000 (09:52 +0000)]
tools/flex: disable building shared libfl.so
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42308
SVN-Revision: 42310
Felix Fietkau [Tue, 26 Aug 2014 12:33:15 +0000 (12:33 +0000)]
target/toolchain: strip files, leave out the initial gcc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42302
SVN-Revision: 42303
Felix Fietkau [Tue, 26 Aug 2014 12:16:18 +0000 (12:16 +0000)]
build: override hardcoded paths to bison and m4 to make the SDK more relocatable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42300
SVN-Revision: 42301
Jo-Philipp Wich [Mon, 25 Aug 2014 12:46:35 +0000 (12:46 +0000)]
BB: uhttpd: do not configure TLS parameters if libustream-ssl is not present
A quite frequent problem after sysupgrading from an older, SSL enabled build
is that ustream-ssl is not installed so uhttpd fails to come up again due to
https listening directives in the preserved configuration.
Skip key/cert and ssl listen options when libustream-ssl.so is not present.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42284
SVN-Revision: 42286
Jo-Philipp Wich [Mon, 25 Aug 2014 12:46:27 +0000 (12:46 +0000)]
BB: iwinfo: properly decode SSIDs when scanning through wpa_supplicant
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42273
SVN-Revision: 42285
Steven Barth [Mon, 25 Aug 2014 06:12:19 +0000 (06:12 +0000)]
odhcp6c: enable softwires support by default
SVN-Revision: 42275
Steven Barth [Sun, 24 Aug 2014 08:13:42 +0000 (08:13 +0000)]
odhcpd: fix static lease behavior with dhcpv4
SVN-Revision: 42271
Felix Fietkau [Thu, 21 Aug 2014 19:13:10 +0000 (19:13 +0000)]
uclient: update to latest version, fixes HTTP keepalive issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42257
SVN-Revision: 42258
Jonas Gorski [Thu, 21 Aug 2014 18:28:09 +0000 (18:28 +0000)]
BB: dropbear: restore performance by disabling mips16
Disable MIPS16 to prevent it negatively affecting performance.
Observed was a increase of connection delay from ~6 to ~11 seconds
and a reduction of scp speed from 1.1MB/s to 710kB/s on brcm63xx.
Fixes #15209.
Backport of r42250.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42255
Steven Barth [Wed, 20 Aug 2014 10:19:03 +0000 (10:19 +0000)]
base-files: increase igmp_max_memberships to improve multicast-proxy handling
SVN-Revision: 42228
Steven Barth [Wed, 20 Aug 2014 09:53:29 +0000 (09:53 +0000)]
dnsmasq: fix a race condition possibly leading to lockup
SVN-Revision: 42226
Steven Barth [Tue, 19 Aug 2014 06:00:09 +0000 (06:00 +0000)]
odhcpd: bump for bugfixes
SVN-Revision: 42219
Steven Barth [Tue, 19 Aug 2014 06:00:07 +0000 (06:00 +0000)]
dnsmasq: respect option dhcpv4 disabled in dhcp-config
SVN-Revision: 42218
Steven Barth [Tue, 19 Aug 2014 05:39:28 +0000 (05:39 +0000)]
bb: bump netifd
SVN-Revision: 42213
Florian Fainelli [Sat, 16 Aug 2014 17:35:13 +0000 (17:35 +0000)]
ar7: backport r42168
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42169
Hauke Mehrtens [Thu, 14 Aug 2014 21:24:14 +0000 (21:24 +0000)]
BB: brcm47xx: image: update list of Netgear WNR* firmwares
backport of r42165
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42167
Hauke Mehrtens [Thu, 14 Aug 2014 21:23:36 +0000 (21:23 +0000)]
BB: brcm47xx: fix brcm47xx.legacy build
we should check for ssb here.
backport of r42164.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42166
Steven Barth [Wed, 13 Aug 2014 14:04:01 +0000 (14:04 +0000)]
BB: feeds: switch telephony feed to for-14.07 branch
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 42159
Steven Barth [Tue, 12 Aug 2014 13:30:38 +0000 (13:30 +0000)]
odhcpd: multiple DHCPv4 improvements (thx Christian Mehlis)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42154
Jo-Philipp Wich [Tue, 12 Aug 2014 11:15:38 +0000 (11:15 +0000)]
BB: package: fix segfault of iwinfo.scanlist("radio0").
This is a bug revealed in r41830.
First, the static variable `char nif[IFNAMSIZ]` of nl80211_phy2ifname()
would be zeroed out if the argument is "wlan0" or the like. This will
happen in the following call stack.
nl80211_get_scanlist("radio0", buf, len);
nl80211_phy2ifname("radio0") // return static var nif with content "wlan0"
nl80211_get_scanlist(nif, buf, len); // tail call
nl80211_get_mode(nif);
nl80211_phy2ifname(nif); // zero out nif
Later we try nl80211_ifadd("") which was supposed to create interface
"tmp.", but that won't happen because nl80211_msg() will put an invalid
ifidx 0 to the nlmsg.
Then iwinfo_ifup() and iwinfo_ifdown() would fail and happily
nl80211_get_scanlist() returned 0 and left *len undefined.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Backport of r42151
SVN-Revision: 42152
Jo-Philipp Wich [Mon, 11 Aug 2014 18:17:09 +0000 (18:17 +0000)]
BB: base-files: /lib/functions/network.sh: fix network_get_ipaddr6
When looking for the first ipaddr also consider the current prefix just
like network_get_ipaddrs6 does. If ipv6-address was empty the function
did not return the first ipaddr even if the list was non-empty.
fixes commit
83e9122f88a002871d5cdf421cf6aa6052b7e006
Signed-off-by: Henning Schild <henning@hennsch.de>
Backport of r42139
SVN-Revision: 42140
Jo-Philipp Wich [Sun, 10 Aug 2014 10:17:03 +0000 (10:17 +0000)]
BB: netfilter: consider reply direction on selective flushing
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42095
SVN-Revision: 42096
Jo-Philipp Wich [Sun, 10 Aug 2014 09:21:19 +0000 (09:21 +0000)]
BB: netfilter: support /proc conntrack flushing of specific ip addresses
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42092
SVN-Revision: 42094
Jo-Philipp Wich [Sat, 9 Aug 2014 13:05:03 +0000 (13:05 +0000)]
BB: build: fix removal of old .ipk files with CONFIG_PER_FEED_REPO
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42090
SVN-Revision: 42091
Jo-Philipp Wich [Sat, 9 Aug 2014 12:11:34 +0000 (12:11 +0000)]
BB: build: consider sub-directories when deploying packages to image with CONFIG_PER_FEED_REPO (#17430)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42041
SVN-Revision: 42089
Hauke Mehrtens [Fri, 8 Aug 2014 23:06:16 +0000 (23:06 +0000)]
broadcom-wl: add support for a8xx broadcom devices
Tested on Comtrend VR-3025u (brcm6368 + a8d6-43222).
backport of: r42084
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 42087
Hauke Mehrtens [Fri, 8 Aug 2014 23:05:24 +0000 (23:05 +0000)]
brcm47xx: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.
Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.
backport of: r42083
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42086
Steven Barth [Fri, 8 Aug 2014 08:46:26 +0000 (08:46 +0000)]
odhcpd: avoid logspam in certain corner cases
SVN-Revision: 42068
Steven Barth [Fri, 8 Aug 2014 05:31:38 +0000 (05:31 +0000)]
odhcpd: write host-entries for all leased IPv6 addresses
SVN-Revision: 42066
Steven Barth [Fri, 8 Aug 2014 05:26:21 +0000 (05:26 +0000)]
cyassl: update to 3.1.0
SVN-Revision: 42064
Steven Barth [Fri, 8 Aug 2014 05:21:38 +0000 (05:21 +0000)]
polarssl: bump to 1.3.8
SVN-Revision: 42062
John Crispin [Thu, 7 Aug 2014 20:55:33 +0000 (20:55 +0000)]
openssl: another day another bug fix update
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42055
SVN-Revision: 42056
Felix Fietkau [Thu, 7 Aug 2014 19:31:19 +0000 (19:31 +0000)]
base-files: enable option to skip the netfilter "filter" table for established connection packets by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42048
SVN-Revision: 42051
Felix Fietkau [Thu, 7 Aug 2014 19:31:18 +0000 (19:31 +0000)]
kernel: add a patch to allow disabling processing of the netfilter "filter" table for established connection packets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42046
SVN-Revision: 42050
Felix Fietkau [Thu, 7 Aug 2014 19:31:16 +0000 (19:31 +0000)]
kernel: improve ipv4 netfilter optimization patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42045
SVN-Revision: 42049
Steven Barth [Thu, 7 Aug 2014 18:08:10 +0000 (18:08 +0000)]
odhcpd: update hostfile more often
SVN-Revision: 42043
John Crispin [Thu, 7 Aug 2014 12:42:26 +0000 (12:42 +0000)]
ralink: revert r37163
https://dev.openwrt.org/ticket/17071
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42036
SVN-Revision: 42039
Steven Barth [Thu, 7 Aug 2014 12:33:22 +0000 (12:33 +0000)]
iptables: add kmod-ipt-nf* to dependency list of iptables-mod-nf*.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42035
Steven Barth [Thu, 7 Aug 2014 10:24:28 +0000 (10:24 +0000)]
netifd: bump to latest version
SVN-Revision: 42033
Steven Barth [Thu, 7 Aug 2014 10:00:30 +0000 (10:00 +0000)]
ar71xx: Add support for the WNDR3800CH
Apparently this is a fairly common refurb unit of the 3800 series now,
with merely the recognition string changed in the boot loader.
Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>
SVN-Revision: 42031
Steven Barth [Thu, 7 Aug 2014 10:00:28 +0000 (10:00 +0000)]
iptables: NFLOG and NFQUEUE targets' full support
NFLOG and NFQUEUE targets' full support for iptables.
Includes all needed kernel modules (Xtables's and Netlink's)
and userspace libraries.
All added kernel modules can be individually disabled,
all other new libraries get their own individual packages.
Reported-by: Fabian Hugelshofer <hugelshofer2006@gmx.ch>
Reported-by: Rainer Poisel <rainer.poisel@fhstp.ac.at>
Reported-by: Derek LaHousse <dlahouss@mtu.edu>
Signed-off-by: Guillaume Déflache <guillaume.deflache@ibwag.com>
SVN-Revision: 42030
John Crispin [Thu, 7 Aug 2014 09:55:11 +0000 (09:55 +0000)]
octeon: add missing gpio_to_irq()
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r42028
SVN-Revision: 42029
Steven Barth [Thu, 7 Aug 2014 05:51:21 +0000 (05:51 +0000)]
odhcpd: correct incorrect commit-id in last commit
SVN-Revision: 42027
Steven Barth [Thu, 7 Aug 2014 05:34:43 +0000 (05:34 +0000)]
odhcpd: skip MSRs in RAs for prefixes with same size as DP
SVN-Revision: 42025
Hauke Mehrtens [Wed, 6 Aug 2014 22:02:14 +0000 (22:02 +0000)]
BB: mac80211: b43: update b43 to version master-2014-07-29-1
This add 5GHz support for N-PHY to b43, thanks Rafał Miłecki.
b43_wflush16 was put into an extra function because it is pretty big in asm.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
backport: r41900
SVN-Revision: 42021
Hauke Mehrtens [Wed, 6 Aug 2014 22:01:13 +0000 (22:01 +0000)]
kernel: update bcma to version master-2014-07-29-1
This is a backport of bcma from wireless-tesing/master tag master-2014-07-29-1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
backport: r41899
SVN-Revision: 42020
John Crispin [Wed, 6 Aug 2014 18:18:49 +0000 (18:18 +0000)]
build: add new option to add disabled feeds commented out to opkg.conf
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42004
SVN-Revision: 42018
John Crispin [Wed, 6 Aug 2014 18:18:48 +0000 (18:18 +0000)]
include: fix detection of installed feeds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42003
SVN-Revision: 42017
John Crispin [Wed, 6 Aug 2014 18:18:47 +0000 (18:18 +0000)]
build: introduce per feed repository support
This changeset implements a new menuconfig option to generate separate
repositories for each enabled package feed instead of one monolithic one.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r42002
SVN-Revision: 42016
Felix Fietkau [Wed, 6 Aug 2014 17:07:35 +0000 (17:07 +0000)]
iwinfo: allow scans in AP mode on nl80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r42014
SVN-Revision: 42015
Felix Fietkau [Wed, 6 Aug 2014 10:30:21 +0000 (10:30 +0000)]
ar71xx: update Carambola2 platform data
Change list:
* Remove button info on GPIO12, there is no button there.
* Remove nvram mtd partition, as it's not used for anything, saves 64k for user data.
Tested building for carambola2 target.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Backport of r41993
SVN-Revision: 42013
Felix Fietkau [Wed, 6 Aug 2014 10:30:20 +0000 (10:30 +0000)]
toolchain/musl: update to version 1.1.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r41954
SVN-Revision: 42012
Felix Fietkau [Wed, 6 Aug 2014 10:30:19 +0000 (10:30 +0000)]
mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r41953
SVN-Revision: 42011
Felix Fietkau [Wed, 6 Aug 2014 10:30:18 +0000 (10:30 +0000)]
ath9k: disable periodic entropy gathering (keep initial) to fix some stability issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r41952
SVN-Revision: 42010
Felix Fietkau [Wed, 6 Aug 2014 10:30:17 +0000 (10:30 +0000)]
kernel: when using --gc-sections, add --sort-section=name to get a more stable sorting order
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r41951
SVN-Revision: 42009
Felix Fietkau [Wed, 6 Aug 2014 10:30:14 +0000 (10:30 +0000)]
kernel: add a small xfrm related performance optimization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r41950
SVN-Revision: 42008
Felix Fietkau [Wed, 6 Aug 2014 10:30:09 +0000 (10:30 +0000)]
netfilter: introduce xt_id match
This commit implements a new netfilter match "xt_id" which can be used to
attach unsigned 32bit IDs to iptables rules.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r41945
SVN-Revision: 42007
Steven Barth [Tue, 5 Aug 2014 10:03:48 +0000 (10:03 +0000)]
netifd: minor fixes (thanks Hans Dedecker)
SVN-Revision: 42001
Steven Barth [Tue, 5 Aug 2014 10:00:25 +0000 (10:00 +0000)]
gre: Change hostdependcy to remote endpoint tunnel address
Depend on the GRE tunnel peeraddr to trigger setup of the tunnel interface.
Addresses the issue reported in https://lists.openwrt.org/pipermail/openwrt-devel/2014-August/027201.html
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 41999
Steven Barth [Mon, 4 Aug 2014 05:57:05 +0000 (05:57 +0000)]
Merge gre config support since netifd was bumped.
SVN-Revision: 41989
projects / openwrt / svn-archive / openwrt.git / log