[PATCH] sysctl: remove insert_at_head from register_sysctl

The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name.  Which is
pain for caching and the proc interface never implemented.

I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.

So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: remove support for directory strategy routines

parse_table has support for calling a strategy routine when descending into a
directory.  To date no one has used this functionality and the /proc/sys
interface has no analog to it.

So no one is using this functionality kill it and make the binary sysctl code
easier to follow.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: remove support for CTL_ANY

There are currently no users in the kernel for CTL_ANY and it only has effect
on the binary interface which is practically unused.

So this complicates sysctl lookups for no good reason so just remove it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: create sys/fs/binfmt_misc as an ordinary sysctl entry

binfmt_misc has a mount point in the middle of the sysctl and that mount point
is created as a proc_generic directory.

Doing it that way gets in the way of cleaning up the sysctl proc support as it
continues the existence of a horrible hack.  So instead simply create the
directory as an ordinary sysctl directory.  At least that removes the magic
special case.

[akpm@osdl.org: warning fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: move SYSV IPC sysctls to their own file

This is just a simple cleanup to keep kernel/sysctl.c from getting to crowded
with special cases, and by keeping all of the ipc logic to together it makes
the code a little more readable.

[gcoady.lk@gmail.com: build fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Grant Coady <gcoady.lk@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: move utsname sysctls to their own file

This is just a simple cleanup to keep kernel/sysctl.c from getting to crowded
with special cases, and by keeping all of the utsname logic to together it
makes the code a little more readable.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: move init_irq_proc into init/main where it belongs

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: register the ocfs2 sysctl numbers

ocfs2 was did not have the binary number it uses under CTL_FS registered in
sysctl.h.  Register it to avoid future conflicts, and change the name of the
definition to be in line with the rest of the sysctl numbers.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables in NTFS and remove sys_sysctl support

Putting ntfs-debug under FS_NRINODE was not a kosher thing to do so don't give
it any binary number.

[akpm@osdl.org: build fix]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert coda ctl_tables and remove binary sysctls

Will converting the coda sysctl initializers I discovered that it is yet
another user of sysctl that was stomping CTL_KERN.  So off with it's
sys_sysctl support since it wasn't done in a supportable way.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables in drivers/parport/procfs.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: register the sysctl number used by the arlan driver

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: remove sys_sysctl support from drivers/char/rtc.c

The real time clock driver was using the binary number reserved for cdroms in
the sysctl binary number interface, which is a no-no.  So since the sysctl
binary interface is wrong remove it.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: remove sys_sysctl support from the hpet timer driver

In the binary sysctl interface the hpet driver was claiming to be the cdrom
driver.  This is a no-no so remove support for the binary interface.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/mm/init.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/kernel/vsyscall.c

Basically everything was done but I removed all element initializers from the
trailing entries to make it clear the entire last entry should be zero filled.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables in arch/x86_64/ia32/ia32_binfmt.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: x86_64: remove unnecessary use of insert_at_head

The only sysctl x86_64 provides are not provided elsewhere, so insert_at_head
is unnecessary.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert arch/sh64/kernel/traps.c and remove ABI breakage

While doing the C99 conversion I notices that the top level sh64 directory was
using the binary number for CTL_KERN.  That is a no-no so I removed the
support for the sysctl binary interface only leaving sysctl /proc support.

At least the sysctl tables were placed at the end of the list so user space
did not see this mistake.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables entries in arch/ppc/kernel/ppc_htab.c

And make the mode of the kernel directory 0555 no one is allowed to write to
sysctl directories.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert ctl_tables in arch/powerpc/kernel/idle.c

This was partially done already and there was no ABI breakage what a relief.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: s390: remove unnecessary use of insert_at_head

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: s390: move sysctl definitions to sysctl.h

We need to have the the definition of all top level sysctl directories
registers in sysctl.h so we don't conflict by accident and cause abi problems.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert arch/mips/lasat/sysctl.c and remove ABI breakage

While C99 converting the ctl_table initializers I realized that the binary
sysctl numbers were in conflict with the binary values under CTL_KERN.
Including CTL_KERN KERN_VERSION as used by glibc.  So I just removed the
sysctl binary interface for these values, as it was unsupportable.

Luckily these sysctl were inserted at the end of the sysctl list so this bug
was not visible to userspace.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert the ctl_tables in arch/mips/au1000/common/power.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: mips/au1000: remove sys_sysctl support

The assignment of binary numbers for sys_sysctl use was in shambles and
despite requiring methods.  Nothing was implemented on the sys_sysctl side.

So this patch gives a mercy killing to the sys_sysctl support for
powermanagment on mips/au1000.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert arch/ia64/kernel/perfmon and remove ABI breakage

This convters the sysctl ctl_tables to use C99 initializers.  While I was
looking at it I discovered it was using a portion of the sysctl binary
addresses space under CTL_KERN KERN_OSTYPE which was completely inappropriate.
 So I completely removed all of the sysctl binary names, to remove and avoid
the ABI conflict.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 Convert arch/ia64/sn/kernel/xpc_main.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: sn: remove sysctl ABI BREAKAGE

By not using the enumeration in sysctl.h (or even understanding it) the SN
platform placed their arch specific xpc directory on top of CTL_KERN and only
because they didn't have 4 entries in their xpc directory got lucky and didn't
break glibc.

This is totally irresponsible.  So this patch entirely removes sys_sysctl
support from their sysctl code.  Hopefully they don't have ascii name
conflicts as well.

And now that they have no ABI numbers add them to the end instead of the
sysctl list instead of the head so nothing else will be overridden.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert arch/frv/kernel/sysctl.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: C99 convert arch/frv/kernel/pm.c

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: frv: remove unnecessary insert_at_head flag

Since the binary sysctl numbers are unique putting the registered sysctls at
the head of the sysctl list where they can override existing sysctls serves no
useful purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: move CTL_FRV into sysctl.h where it belongs

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: frv: pm remove unnecessary insert_at_head flag

With unique binary numbers setting insert_at_head to insert yourself at the
head of sysctl list and thus override existing sysctl entries serves no point.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: move CTL_PM into sysctl.h where it belongs

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: cdrom: don't set de->owner

There is no need for open files in /proc/sys/XXX to hold a reference count on
the module that provides the file to prevent module unload races.  While there
is code active in the module p->used in the sysctl_table_header is
incremented, preventing the sysctl from being unregisted.  Once the sysctl is
unregistered it cannot be found.  Open files are also not a problem as they
revalidate the sysctl information and bump p->used before accessing module
code.

So setting de->owner is unnecessary, makes for a bad example and gets in my
way of removing ctl_table->de.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: cdrom: remove unnecessary insert_at_head flag

With unique binary sysctl numbers setting insert_at_head to override other
sysctl entries is pointless.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: ipmi: remove unnecessary insert_at_head flag

With unique sysctl binary numbers setting insert_at_head is pointless.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Corey Minyard <minyard@acm.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: mac_hid: remove unnecessary insert_at_head flag

With unique sysctl binary numbers setting insert_at_head is pointless.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: md: remove unnecessary insert_at_head flag

The sysctls used by the md driver are have unique binary numbers so remove the
insert_at_head flag as it serves no useful purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: scsi: remove unnecessary insert_at_head flag

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: atalk: remove unnecessary insert_at_head flag

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: ax25: remove unnecessary insert_at_head flag

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: dccp: remove unnecessary insert_at_head flag

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: decnet: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag does not
succeed in overriding any sysctls, and is just confusing because it doesn't.
Clear the flag.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: ipx: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag servers
no semantic purpose and is just confusing.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: llc: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag serves
no semantis purpose, and is just confusing.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: netrom: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag serves
no semantic purpose, so it is just confusing.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: rose: remove unnecessary insert_at_head flag

The sysctl numbers used are unique so setting the insert_at_head flag serves
no semantic purpose.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: sunrpc: don't unnecessarily set ctl_table->de

We don't need this to prevent module unload races so remove the unnecessary
code.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: sunrpc: remove unnecessary insert_at_head flag

Because the sunrpc sysctls don't conflict with any other sysctls the setting
the insert at head flag to register_sysctl has no semantic meaning.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: move CTL_SUNRPC to sysctl.h where it belongs

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] sysctl: x25: remove unnecessary insert_at_head from register_sysctl_table

There has not been much maintenance on sysctl in years, and as a result is
there is a lot to do to allow future interesting work to happen, and being
ambitious I'm trying to do it all at once :)

The patches in this series fall into several general categories.

- Removal of useless attempts to override the standard sysctls

- Registers of sysctl numbers in sysctl.h so someone else does not use
  the magic number and conflict.

- C99 conversions so it becomes possible to change the layout of
  struct ctl_table without breaking everything.

- Removal of useless claims of module ownership, in the proc dir entries

- Removal of sys_sysctl support where people had used conflicting sysctl
  numbers. Trying to break glibc or other applications by changing the
  ABI is not cool.  9 instances of this in the kernel seems a little
  extreme.

- General enhancements when I got the junk I could see out.

This patch:

Since x25 uses unique binary numbers inserting yourself at the head of the
search list for sysctls so you can override already registered sysctls is
pointless.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] scheduled removal of SA_XXX interrupt flags: ata fix

SA_SHIRQ is going away.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 2

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users in -mm.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Scheduled removal of SA_xxx interrupt flags fixups

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Simmons <jsimmons@infradead.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] OSS: replace kmalloc()+memset() combos with kzalloc()

Replace kmalloc() + memset() pairs with the appropriate kzalloc() calls.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove many unneeded #includes of sched.h

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: allow the server to provide a gid list when using AUTH_UNIX authentication

AUTH_UNIX authentication (the standard with NFS) has a limit of 16 groups ids.
 This causes problems for people in more than 16 groups.

So allow the server to map a uid into a list of group ids based on local
knowledge rather depending on the (possibly truncated) list from the client.

If there is no process on the server responding to upcalls, the gidlist in the
request will still be used.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: add some new fsid types

Add support for using a filesystem UUID to identify and export point in the
filehandle.

For NFSv2, this UUID is xor-ed down to 4 or 8 bytes so that it doesn't take up
too much room.  For NFSv3+, we use the full 16 bytes, and possibly also a
64bit inode number for exports beneath the root of a filesystem.

When generating an fsid to return in 'stat' information, use the UUID (hashed
down to size) if it is available and a small 'fsid' was not specifically
provided.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: tidy up choice of filesystem-identifier when creating a filehandle

If we are using the same version/fsid as a current filehandle, then there is
no need to verify the the numbers are valid for this export, and they must be
(we used them to find this export).

This allows us to simplify the fsid selection code.

Also change "ref_fh_version" and "ref_fh_fsid_type" to "version" and
"fsid_type", as the important thing isn't that they are the version/type of
the reference filehandle, but they are the chosen type for the new filehandle.

And tidy up some indenting.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: fix return value for writes to some files in 'nfsd' filesystem

Most files in the 'nfsd' filesystem are transactional.  When you write, a
reply is generated that can be read back only on the same 'file'.

If the reply has zero length, the 'write' will incorrectly return a value of
'0' instead of the length that was written.  This causes 'rpc.nfsd' to give an
annoying warning.

This patch fixes the test.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] SPI: atmel_spi driver

Driver for the Atmel on-chip SPI master controller.

Tested primarily on AVR32/AT32AP7000/ATSTK1000 using mtd_dataflash and the
jffs2 filesystem.  Should also work fine on various AT91 ARM-based chips
like AT91SAM926x and AT91RM9200.

Hardware documentation can be found in the AT32AP7000 data sheet, or its
AT91 siblings, which can be downloaded from

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] PNX8550 UART driver

Add UART support for PNX8330/8550/8950 Philips MIPS-based SoCs.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fix PNX8550 serial breakage

Fix the serial header breakage for the PNX8550 MIPS platform.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] serial: replace kmalloc+memset with kzalloc

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] serial: make sure UART is powered up when dumping MCTRL status

Since serial devices are powered down when not in use and some of those
devices cannot be accessed when powered down, we need to enable power
around calls to get_mcrtl() when dumping port state via uart_line_info().
This resolves hangs observed on some machines while reading serial device
registers when a port is powered off.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] serial: trivial code flow simplification

Return failure immediately, so we don't have to test it twice.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] 8250 UART backup timer

The patch below works around a minor bug found in the UART of the remote
management card used in many HP ia64 and parisc servers (aka the Diva
UARTs).  The problem is that the UART does not reassert the THRE interrupt
if it has been previously cleared and the IIR THRI bit is re-enabled.  This
can produce a very annoying failure mode when used as a serial console,
allowing a boot/reboot to hang indefinitely until an RX interrupt kicks it
into working again (ie.  an unattended reboot could stall).

To solve this problem, a backup timer is introduced that runs alongside the
standard interrupt driven mechanism.  This timer wakes up periodically,
checks for a hang condition and gets characters moving again.  This backup
mechanism is only enabled if the UART is detected as having this problem,
so systems without these UARTs will have no additional overhead.

This version of the patch incorporates previous comments from Pavel and
removes races in the bug detection code.  The test is now done before the
irq linking to prevent races with interrupt handler clearing the THRE
interrupt.  Short delays and syncs are also added to ensure the device is
able to update register state before the result is tested.

Aristeu says:

  this was tested on the following HP machines and solved the problem:
  rx2600, rx2620, rx1600 and rx1620s.

hpa says:

  I have seen this same bug in soft UART IP from "a major vendor."

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] qconf: hide empty list items

This patch fixes showing empty config list items if "Option/Show All
Options" is turned on.  For example empty items appears on list of 'Block
Layer' menu.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] new toplevel target: headers_check_all

Add new headers_check_all target for checking all arches in one go.

Useful for distros (and people with too much time on their hands) that support
a ton of architectures, headers_check_all is to headers_check as
headers_install_all is to headers_install

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Kbuild: Remove references to deprecated "prepare-all" target from Makefile

Remove references to the deprecated "make prepare-all" target from the
top-level Makefile; use just "make prepare" instead.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] qconf: Back button behaviour normalization

Do "Back" button behaviour normalization so it is enabled starting from
second-level menu only.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] qconf: fix showing help info on failed search

qconf does not clear help text in search window if previous search has been
failed.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@mail.ru>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] qconf: relocate Search Command

Relocate the qconf search command to the "Edit"->"Find" menu option.

This is per the discussion on my qconf search dialog patch.

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] qconf: immediately update integer and string values in xconfig display

In xconfig's display integer and string values are also shown as part of
the config item's descriptive text.

This patch updates the descriptive text, when the corresponding value has
been changed.  Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7744

Take2 uses updateList() so config values dependending on the changed value
see the change.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] add .mailmap for proper git-shortlog output

This list was built into the git-shortlog tool and has been removed in the
latest version.  It should be maintained separately so this is what this
patch does.

A couple more entries were added to the original list as well.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Junio C Hamano <junkio@cox.net>
Cc: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Make mkcompile_h use LANG=C and LC_ALL=C for $CC -v

Fix a minor bug in mkcompile_h.  As one can see, the current locale is used
while getting the version of gcc.  This produces problems when a locale
other than C or en_US is used.  As an example, my /proc/version contains
Turkish characters in iso-8859-9 encoding.

This patch fixes this issue by making sure that the C locale is used to get
gcc's version.

Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] search a little harder for mkimage

Check to see if `${CROSS_COMPILE}mkimage` exists and if not, fall back to
the standard `mkimage`

The Blackfin toolchain includes mkimage, but we dont want to namespace
collide with any of the user's system setup, so we prefix it with our
toolchain name.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ia64: fix noncoherent DMA API so devres builds

On ia64, drivers/base/dma-mapping.c doesn't build because it calls
dma_alloc_noncoherent() and dma_free_noncoherent(), which appear to be
terminally broken; the calls end up generating errors like

    drivers/base/dma-mapping.c: In function 'dmam_noncoherent_release':
    drivers/base/dma-mapping.c:32: error: 'struct ia64_machine_vector' has no member named 'platform_dma_free_coherent'

because the multiple levels of macro expansion in <asm/dma-mapping.h> and
<asm/machvec.h> end up turning a call to dma_free_noncoherent() into
ia64_mv.platform_dma_free_coherent (instead of the intended
ia64_mv.dma_free_coherent).

This patch fixes this by converting dma_{alloc,free}_noncoherent() into
inline functions that call the corresponding coherent functions, instead of
trying to do this with macros.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'master' of /home/trondmy/kernel/linux-2.6/

Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Always fill MTTs from CPU
  IB/mthca: Merge MR and FMR space on 64-bit systems
  IB/mthca: Fix access to MTT and MPT tables on non-cache-coherent CPUs
  IB/mthca: Give reserved MTTs a separate cache line
  IB/mthca: Fix reserved MTTs calculation on mem-free HCAs
  RDMA/cxgb3: Add driver for Chelsio T3 RNIC
  IB: Remove redundant "_wq" from workqueue names
  RDMA/cma: Increment port number after close to avoid re-use
  IB/ehca: Fix memleak on module unloading
  IB/mthca: Work around gcc bug on sparc64
  IPoIB: Connected mode experimental support
  IB/core: Use ARRAY_SIZE macro for mandatory_table
  IB/mthca: Use correct structure size in call to memset()

Merge /pub/scm/linux/kernel/git/sfrench/cifs-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] on reconnect to Samba - reset the unix capabilities
  [CIFS] Allow update of EOF on remote extend of file
  [CIFS] POSIX CIFS Extensions (continued) - POSIX Open
  [CIFS] Additional POSIX CIFS Extensions infolevels

[CIFS] on reconnect to Samba - reset the unix capabilities

After temporary server or network failure and reconneciton, we were not
resending the unix capabilities via SetFSInfo - which confused Samba posix
byte range locking code.

Discovered by jra

Signed-off-by: Steve French <sfrench@us.ibm.com>

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPSEC]: Fix the address family to refer encap_family
  [IPSEC]: changing API of xfrm6_tunnel_register
  [IPSEC]: make sit use the xfrm4_tunnel_register
  [IPSEC]: Changing API of xfrm4_tunnel_register.
  [TCP]: Prevent pseudo garbage in SYN's advertized window
  [NET_SCHED]: sch_hfsc: replace ASSERT macro by WARN_ON
  [BRIDGE] br_if: Fix oops in port_carrier_check
  [NETFILTER]: Clear GSO bits for TCP reset packet
  [TG3]: Update copyright, version, and reldate.
  [TG3]: Add some tx timeout debug messages.
  [TG3]: Use constant for PHY register 0x1e.
  [TG3]: Power down 5704 serdes transceiver when shutting down.
  [TG3]: 5906 doesn't need to switch to slower clock.
  [TG3]: 5722/5756 don't need PHY jitter workaround.
  [TG3]: Use lower DMA watermark for 5703.
  [TG3]: Save MSI state before suspend.
  [XFRM]: Fix IPv4 tunnel mode decapsulation with IPV6=n
  [IPV6] HASHTABLES: Use appropriate seed for caluculating ehash index.

Merge /pub/scm/linux/kernel/git/paulus/powerpc

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
  [POWERPC] Use udbg_early_init() on ppc32
  [POWERPC] Open Firmware serial port driver
  [POWERPC] Move MPIC smp routines into mpic.c
  [POWERPC] Cleanup pseries kexec code
  [POWERPC] Cleanup pseries smp initialisation code
  [POWERPC] Consolidate pseries platform header files into pseries.h
  [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
  [POWERPC] cell: pm_rtas_activat_signals routine cleanup
  [POWERPC] cell: PPU Oprofile cleanup patch
  [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
  [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
  [POWERPC] spu sched: use DECLARE_BITMAP
  [POWERPC] spu sched: forced preemption at execution
  [POWERPC] spu sched: update some comments
  [POWERPC] spu sched: simplity spu_remove_from_active_list
  [POWERPC] spufs: optimize spu_run
  [POWERPC] spufs: runqueue simplification
  [POWERPC] spufs: move prio to spu_context
  [POWERPC] spufs: state_mutex cleanup
  [POWERPC] spufs: simplify state_mutex
  ...

[POWERPC] Use udbg_early_init() on ppc32

udbg_early_init() is a function used on 64 bit systems, which
initializes whichever early udbg backend is configured.  This function
is not called on 32-bit, however if btext early debug is enabled it
does have an explicit, inline, #ifdef-ed assignment performing
analagous initialization.

This patch makes things more uniform by folding the btext
initialization as an option into udbg_early_init() and calling that
from the 32-bit setup path.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Open Firmware serial port driver

This can be used for serial ports that are connected to an
OF platform bus but are not autodetected by the lecacy
serial support.
It will automatically take over devices that come from the
legacy serial detection, which usually is only one device.

In some cases, rtas may be set up to use the serial port
in the firmware, which allows easier debugging before probing
the serial ports. In this case, the "used-by-rtas" property
must be set by the firmware. This patch also adds code to the
legacy serial driver to check for this.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Move MPIC smp routines into mpic.c

Move a couple of MPIC smp routines into mpic.c, they're inside an SMP
block in mpic.c - so they're still only built for SMP.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Cleanup pseries kexec code

Move all the pseries kexec code into one file, platforms/pseries/kexec.c
Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't
have to have #ifdef CONFIG_KEXEC in setup.c

Move the initialisation of the ppc_md kexec callbacks into an init routine.
This is well and truly early enough to cause no change in behaviour, we
can't kexec until userspace has given us a kernel to kexec into.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Cleanup pseries smp initialisation code

Move some extern declarations from setup.c into the new pseries.h.
While we're at it, provide dummy implementations for !SMP, to avoid
cluttering the C file with more #ifdefs.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Consolidate pseries platform header files into pseries.h

Following the example of platforms/pasemi, consolidate a couple of
tiny header files in platforms/pseries into pseries.h.

This gives us a convenient place to put things that need to be
available to the platform code, but not public. And hopefully will
help people resist the temptation of sticking externs in C files.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Merge branch 'cell-merge' of git+ssh:///linux/kernel/git/arnd/cell-2.6

Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Stop using i2c_adapter.class_dev
  i2c: Remove the warning on missing adapter device
  i2c: Declare more i2c_adapter parent devices
  i2c: PA Semi SMBus driver
  i2c-amd8111: Proposed cleanups
  i2c-parport: Add support for One For All remote JP1 interface
  i2c-viapro: Add support for the VIA CX700 south bridge
  i2c: Add IDs to adapters
  i2c: Update the list of bus IDs
  i2c: Add driver suspend/resume/shutdown support
  i2c: completion header cleanups
  i2c-i801: Document the SMBus unhiding quirk
  i2c-i801: Spelling fix
  i2c: Fix typo in SMBus Write Word Data description
  i2c-piix4: Add support for the ATI SB600
  i2c-nforce2: Drop unused reference to pci_dev
  i2c/vt8231: Remove superfluous initialization
  i2c-ali1563: Fix device initialization
  i2c-ali1563: Improve the status messages

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.
  [MIPS] Fix uniprocessor Sibyte builds.
  [MIPS] Make entry.S a little more readable.
  [MIPS] Remove stray instruction from __get_user_asm_ll32.
  [MIPS] 32-bit: Fix warning about cast for fetching pointer from userspace.
  [MIPS] DECstation: Fix irq handling
  [MIPS] signals: make common _BLOCKABLE macro
  [MIPS] signal: Move sigframe definition for native O32/N64 into signal.c
  [MIPS] signal: Move {restore,setup}_sigcontext prototypes to their user
  [MIPS] signal: Fix warnings in o32 compat code.
  [MIPS] IP27: Enable N32 support in defconfig.
  Revert "[MIPS] Fix warning in get_user when fetching pointer object from userspace."
  [MIPS] Don't claim we support dma_declare_coherent_memory - we don't.
  [MIPS] Unify dma-{coherent,noncoherent.ip27,ip32}
  [MIPS] Improve branch prediction in ll/sc atomic operations.

Merge /linux/kernel/git/wim/linux-2.6-watchdog

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (23 commits)
  [WATCHDOG] timers cleanup
  [WATCHDOG] ib700wdt.c - convert to platform_device part 2
  [WATCHDOG] ib700wdt.c - convert to platform_device
  [WATCHDOG] ib700wdt.c spinlock/WDIOC_SETOPTIONS changes
  [WATCHDOG] ib700wdt.c small clean-up's
  [WATCHDOG] ib700wdt.c clean-up init and exit routines
  [WATCHDOG] ib700_wdt.c stop + set_heartbeat operations
  [WATCHDOG] show default value for nowayout in module parameter
  [WATCHDOG] advantechwdt.c - convert to platform_device part 2
  [WATCHDOG] advantechwdt.c - convert to platform_device
  [WATCHDOG] advantechwdt.c - move set_heartbeat to a seperate function
  [WATCHDOG] advantechwdt.c - cleanup before platform_device patches
  [WATCHDOG] acquirewdt.c - convert to platform_device part 2
  [WATCHDOG] acquirewdt.c - convert to platform_device
  [WATCHDOG] acquirewdt.c - clean before platform_device patches
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd.c - e-mail adres update
  [WATCHDOG] pcwd_usb.c - get heartbeat from dip switches
  [WATCHDOG] pcwd_usb.c - document includes
  [WATCHDOG] pcwd_pci.c - spinlock fixes
  ...

[PATCH] Fix SAK_work workqueue initialization.

Somewhere in the rewrite of the work queues my cleanup of SAK handling
got broken.  Maybe I didn't retest it properly or possibly the API
was changing so fast I missed something.  Regardless currently
triggering a SAK now generates an ugly BUG_ON and kills the kernel.

Thanks to Alexey Dobriyan <adobriyan@openvz.org> for spotting this.

This modifies the use of SAK_work to initialize it when the data
structure it resides in is initialized, and to simply call
schedule_work when we need to generate a SAK.  I update both
data structures that have a SAK_work member for consistency.

All of the old PREPARE_WORK calls that are now gone.

If we call schedule_work again before it has processed it
has generated the first SAK it will simply ignore the duplicate
schedule_work request.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[MIPS] Fix sigset_t endianess swapping issues in 32-bit compat code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Fix uniprocessor Sibyte builds.

Signed-off-by: Andrew Sharp <tigerand@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Make entry.S a little more readable.

When CONFIG_PREEMPT is not set, it also moves one branch instruction from
ret_from_irq() to ret_from_exception().  Therefore we favour the return
from irq case which should be more common than the other one.

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>