staging: octeon: validate interface before calling INDEX

Some helper functions call INDEX before checking if the interface is
valid. Since pow0 is not a real interface, we get the following errors:

cvmx_helper_get_interface_index_num: Illegal IPD port number

Fix by using INDEX only when needed with real interfaces.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: simplify struct for statistics

Merge several structures for statistics to one structure and remove
unnecessary union nesting.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: improve implementation concerning the shared memory

Remove the volatile specifiers of struct slic_shmem. Furthermore store the
bus addresses for the isr pointer, link status and statistics separately
and access the upper and lower word of these addresses by means of
[lower|upper]_32_bits(). By doing this take the endianness into account.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: dont use a structure but offsets for register accesses

Use the new register accessors that use offsets instead of the slic_regs
structure to read/write registers. Since not longer needed remove the
structure completley.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: avoid PCI write posting

Introduce the function slic_flush_write() which reads from the HOSTID
register and can be used to avoid PCI write posting. Use the function at
several critical places in the code.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: introduce register accessors that use register offsets

Introduce accessor functions that read and write registers by using a
register offset.
This is in preparation to replace the register addressing by means of the
slic_regs struct with an addressing by means of offsets.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: start tx queue when interface is brought up

There is no reason to delay tx queue activation until a link is detected.
So start the queue when the interface is brought up and stop it when the
interface is brought down.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: ensure mapping of io-memory is uncached

Writes to registers should be done uncached for various reasons. Ensure
this by replacing ioremap() with ioremap_nocache().

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: notifiy network stack about change in link state

Notify the network stack about link states via netif_carrier_[off|on]().
Also set the link state off initially and when the interface is brought
down.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: handle allocation failure in slic_init_adapter

The memory allocation in slic_init_adapter() can fail. Return an error in
this case and unwind properly. Also make sure that the allocated memory is
properly freed in case of an error in the calling probe() function.
By doing this also replace the alloc() followed by memset to zero the
memory with a zalloc() version.

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: fix 'line over 80 characters'

fix checkpatch.pl warning about 'line over 80 characters'.

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: This patch fixes the checkpatch.pl warning

WARNING: Statements should start on a tabstop

Signed-off-by: Prit Raj <prit.adra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fixed unsigned type warnings

Replace unsigned by unsigned int in fbtft driver.  Issue found by
checkpatch.

Signed-off-by: Ming Yang <minos.future@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: do not allocate huge txbuf

txbuflen can be set to arbitrary value by user and it is also set
automagically to the maximum transfer size of the SPI master controller.

Do not allocate the buffer when larger than vmem. When my SPI master
controller reports maximum transfer size 16M the probe of fbtft fails.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion: remove __GFP_NOWARN when use low order gfp flags

It's useful to show the current memory in detail when alloc failed.

And, there may be a lot of high order alloc failed, just show memory
when an order 0 alloc failed.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ION: Sys_heap: Add cached pool to spead up cached buffer alloc

Add ion cached pool in system heap. This patch add a cached pool
in system heap. It has a great improvement of alloc for cached
buffer.

With memory pressue alloc test 800MB in userspace used iontest.
The result avg is 577ms. Without patch it's avg is about 883ms.

v1: Makes the cached buffer zeroed before going to pool
v2: Add cached param in pool to distinguish wheather need to flush
    cache at a fresh alloc.
    Rework the shrink function.

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Xia Qing <saberlily.xia@hisilicon.com>
Reviewed-by: Fu Jun <oliver.fu@hisilicon.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: fix comparison to NULL issue.

This patch fixes comparison to NULL could be written "wlandev" found
by checkpatch.pl tool.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: fix unnecessary parentheses.

This patch fixes Unnecessary parentheses around interface->dev found
by checkpatch.pl tool.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: fix alignment not matching.

This patch fixes alignment should match open parenthesis found by
checkpatch.pl tool in prism2usb.c.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Fix trailing */ in block comments.

Fix checkpatch.pl warning:

WARNING: Block comments use a trailing */ on a separate line.

Signed-off-by: Bo Yu <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix error handling in wilc_debugfs_init()

We can just ignore the return value from debugfs_create_dir() and
debugfs_create_file(). The second one already interanlly checks the dentry
created by the first before creating the file.

debugfs was written so it would be easy to use, no need for error checking.

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: wilc1000: remove references to semaphores

* Update the comments that refer to semaphores
* Remove redundant includes to semphore.h

Signed-off-by: Joshua Houghton <josh@awful.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: Reformat braces around else

As suggested by Documentation/CodingStyle move braces onto same line as else.

Signed-off-by: Anthony Sheldon <sheldon.anthony.sheldon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: remove braces

Braces are not required in a single statement block.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: donot assign in if statement

It is not the kernel coding style to make assignments in the if
statement and checkpatch was warning us about it.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: do not use return as a function

return is not a function so no need to use the parenthesis.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: icn: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: pcbit: layer2: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: pcbit: edss1: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: i4l: pcbit: drv: use setup_timer() and mod_timer().

Use setup_timer() instead of init_timer(), being the preferred/standard
way to set a timer up.

Also, quoting the mod_timer() function comment:
-> mod_timer() is a more efficient way to update the expire field of an
   active timer (if the timer is inactive it will be activated).

Use setup_timer and mod_timer to setup and arm a timer, to make the code
cleaner and easier to read.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: s626: fix line over 80 characters issue

This fixes up a line over 80 characters issues found by
the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: replace le16_to_cpu() with usb_endpoint_maxp()

Use macro introduced in commit 939f325f4a0f
("usb: add usb_endpoint_maxp() macro")

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi/drivers: Fixed sparse warnings

Fixed below sparse warnings in dt2811.c
 warning: symbol 'dt2811_clk_dividers' was not declared. Should it be static?
 warning: symbol 'dt2811_clk_multipliers' was not declared. Should it be static?

Signed-off-by: Nayeemahmed Badebade <itachi.opsrc@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_at_a2150: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio16d: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Move the configuration options comment into the comedi driver comment
block. That's were they typically are listed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_atmio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_dio24: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_cs: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_670x: fix block comment issues

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08_cs: fix block comments

Fix the checkpatch.pl issue:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3501: add a comedi driver comment block

This comment block is used to automatically generate documentation in
Comedi and Comedilib.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3501: remove timer/counter subdevice support

This driver is for a simple 4/8 channel analog output board with 2 isolated
digital inputs and 2 isolated digital outputs. Support for these subdevices
is provided by the driver.

The boards also has a watchdog timer that can be used to reset the analog
outputs. It can also be used as a general purpose 12-bit timer when the
watchdog function is not necessary. The current support code for this
subdevice is broken. It does not follow the comedi API and requires some
out-of-tree patches in order to even work.

Remove the subdevice support. If a proper register map can be located for
this board we can add support back later.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9080.h: rename some macros for consistency

Most of the macros in "plx9080.h" that define register values are
single-bits flags of the form `PLX_<REG>_<FLAG>`, or are constant,
multi-bit values of the form `PLX_<REG>_<FIELD>_<VAL>`, or are
non-constant, function-like macros of the form `PLX_<REG>_<FIELD>(x)`.
Some of the macros for constant, multi-bit values do not currently
fit the pattern, so rename them for consistency.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9080.h: define PLX_<REG>_TO_<FIELD>(r) macros

Various macros in "plx9080.h" take the form `PLX_<REG>_<FIELD>(x)`,
where `<REG>` is a register name, `<FIELD>` is a field within the
register, and `x` is a value for the field specified by the caller.  The
macros construct a partial register register with the specified field
value placed in the appropriate bits of the register value, and other
bits of the register value zeroed.  Add corresponding macros of the form
`PLX_<REG>_TO_<FIELD>(r)` that extract a field value from a specified
register values.  Remove macros of the form `PLX_<REG>_<FIELD>_SHIFT`
that specified the bit position of a field within a register value as
they are no longer useful.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: add support for new USB gadget

This patch is needed to make the driver support Microchip's OS81210 USB
MOST network interface controller. It simply adds the gadget's product
ID to the driver's ID table.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove unnecessary status assignment

The USB completion callbacks set the status field of an MBO object before
scheduling the clear_work. This patch removes this redundant assignment as
the work_struct does the same for all MBOs.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: init variables at declaration time

This patch initializes variables by the time they are declared.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove redundant parenthesis

This patch removes unnecessary parenthesis in boolean expressions.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove completion object

Waiting for the urb_compl object to complete evaluates always as false.
This patch removes this unnecessary completion object.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: synchronize release of struct buf_anchor

In case a channel that is going to be destroyed has been tagged as not
"healthy" by the function hdm_poison_channel() while the functions
hdm_write_completion() or hdm_read_completion() are being executed, they
race for destruction of buf_anchor.

This patch fixes the problem.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: assign spinlock to local variable

This patch assigns the spinlock of struct mdev to local spinlock_t
variable to get rid of all the ugly dereferencing.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: fix race between enqueue and most_stop_enqueue

The "broken in pipe" handler of the USB-HDM calls most_stop_enqueue() to
stop the MBO traffic before returning all MBOs back to the Mostcore.  As
the enqueue() call from the Mostcore may run in parallel with the
most_stop_enqueue(), the HDM may run into the inconsistent state and
crash the kernel.

This patch synchronizes enqueue(), most_stop_enqueue() and
most_resume_enqueue() with a mutex, hence avoiding the race condition.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: simplify initialization of mbo->status.

This patch simplifies the code that initializes mbo->status.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove redundant conditions

This patch removes the duplication of the expression
(urb->status == -ENOENT || urb->status == -ECONNRESET).

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: make use of is_channel_healthy flag

This patch makes the write completion handler use the is_channel_healthy
flag to prevent the hdm from scheduling a second clear_halt workqueue in
case an endpoint reported a STALL condition.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: rename ID_INIC for consistency

In order to have a consistent naming convention this patch renames
USB_DEV_ID_INIC to USB_DEV_ID_OS81118.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: add USB product id

This patch adds support for the OS81119 MOST network interface controller
to the driver.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: stop core from submitting buffers in case of broken pipe

This patch ensures that no more packets are submitted by the core in
case an USB endpoint has reported a broken pipe (-EPIPE).

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: fix clear halt processing

This patch is needed to ensure that submitted URBs get unlinked before
the driver calls usb_clear_halt(). Since the halt condition of an USB
endpoint is channel related, the work_struct is moved from a buffer
basis to a channel basis.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: provide MBO status when freeing buffers

This patch adds the additional status parameter to function
free_anchored_buffers. This allows to dispatch further processing based
on this flag.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: remove unused macro HW_RESYNC

This patch removes the macro HW_RESYNC that is not used anymore.

Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: aim-cdev: report error returned by alloc_chrdev_region

This patch forwards the error code returned by function
alloc_chrdev_region(). It is needed to stop the module
from hiding the actual cause of failure.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: aim-cdev: fix reported error codes

Currently, the aim-cdev is returning different error codes for the same
root cause. This patch is needed to get rid of the module's inconsistency
when reporting errors.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: don't clean in_data again

We have got a zero buffer for in_data as we use
kzalloc here. So let's remove it anyway.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix checkpatch error

convert spaces to tab

fix the following error messages from checkpatch.pl

ERROR: code indent should use tabs where possible
WARNING: please, no spaces at the start of a line

Signed-off-by: Anson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add James Simmons as another Lustre maintainer

James Simmons is also spendign a lot of efforts on
cleaning up staging tree Lustre code and also
helps to sync up all the missing changes from the other tree.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Fix unnecessary parentheses around variables

This patch fixes all checkpatch occurences of
"CHECK: Unnecessary parentheses around xxx"
in Lustre code.

Signed-off-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: update version to 2.5.99

With all but one of the the missing patches from the
lustre 2.6 version merged upstream its time to update
the upstream clients version.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: decruft md_enqueue() and md_intent_lock()

Remove the lmm and lmmsize parameters from both functions, storing
that data in md_op_data when needed. Remove the unused lookup_flags
parameter from md_intent_lock(), and the unused reqp parameter from
md_enqueue(). Add a union ldlm_policy_data * parameter to
md_enqueue(). Remove the unused function lmv_enqueue_remote().

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/10205
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: remove dead code

Remove unused OBD functions: oti_alloc_cookies(), oti_free_cookies(),
class_observe_import(), class_unobserve_import(),
md_is_subdir(), md_readpage(), obdo2fid(), fid2obdo().

Remove several unused, get-only, and set-only structure members.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/9784
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mdt: add OBD_CONNECT_DIR_STRIPE flag

Add OBD_CONNECT_DIR_STRIPE to tell if the client supports
striped dir, so only new client (>= 2.6) can access striped
directory.

Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4843
Reviewed-on: http://review.whamcloud.com/10773
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: remove unused lmv_readpages()/mdc_readpage()

This patch fixes the following compile error by removing the
dead codes: "error: 'xxx_readpages' defined but not used".
Now that we have md_read_page functionality we can remove
all the *_readpage implementations.

Signed-off-by: Jian Yu <jian.yu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4669
Reviewed-on: http://review.whamcloud.com/9810
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: move dir cache to MDC layer

Move directory entries cache from llite to MDC, so client
side dir stripe will use independent hash function(in LMV),
which does not need to be tightly coupled with the backend
storage dir-entry hash function. With striped directory, it
will be 2-tier hash, LMV calculate hash value according to the
name and hash-type in layout, then each MDT will store these
entry in disk by its own hash.

Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-on: http://review.whamcloud.com/7043
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: implement lmv version of read_page

All the code needed to implement read_page. This
will eventually replace lmv_readpage.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Always return EEXIST on mkdir for existing names

if the name already exists, but we don't have write permissions
in the parent, force talking to the MDS to determine what
more sensical error code to return.
This also happens to fix matlab and other such programs that
assume that EEXIST is the only valid error code for mkdir of
an existing directory.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: introduce lnet_copy_{k, }iov2iter(), kill lnet_copy_{k, }iov2{k, }iov()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: pass iov_iter to ->lnd_recv()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: constify lib-move.c stuff

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: ->kss_scratch... are unused now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ksocknal_lib_send_kiov(): sendmsg doesn't bugger iovec...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ksocknal_lib_send_iov(): sendmsg doesn't bugger iovec...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ksocknal_lib_recv_iov(): recvmsg doesn't bugger iovec anymore...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Stop Infinite CON RACE Condition

In current code, when a CON RACE occurs, the passive side will
let the node with the higher NID value win the race.

We have a field case where a node can have a "stuck"
connection which never goes away and is the trigger of a
never-ending loop of re-connections.

This patch introduces a counter to how many times a
connection in a connecting state has been the cause of a CON RACE
rejection. After 20 times (constant MAX_CONN_RACES_BEFORE_ABORT),
we assume the connection is stuck and let the other side (with
lower NID) win.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7646
Reviewed-on: http://review.whamcloud.com/19430
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lock improvement for ko2iblnd

kiblnd_check_sends() takes conn::ibc_lock at the begin and release
this lock at the end, this is inefficient because most use-case
needs to explicitly release ibc_lock before caling this function.

This patches changes it to kiblnd_check_sends_locked() and avoid
unnecessary lock dances.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7099
Reviewed-on: http://review.whamcloud.com/20322
Reviewed-by: Amir Shehata <amir.shehata@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: make connection more stable with packet loss

IB network may lose last connection handshake packet.
This problem isn't Lustre specific and described at
https://oss.oracle.com/pipermail/rds-devel/2007-December/000271.html
for example. Solution is to make conection established if any packet
is received for it.

Signed-off-by: Alexander Boyko <alexander.boyko@seagate.com>
Signed-off-by: Alexey Lyashkov <alexey.lyashkov@seagate.com>
Seagate-bug-id: MRP-2883
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8303
Reviewed-on: http://review.whamcloud.com/20874
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Alexander Zarochentsev <alexander.zarochentsev@seagate.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Correct position of lnet_ni_decref()

In fix http://review.whamcloud.com/#/c/19614/, the call
to lnet_ni_decref() should have followed the routines
which are using the NI.  This patch correct that.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8022
Reviewed-on: http://review.whamcloud.com/21001
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: Do not drop message when shutting down LNet

There is a case in lnet_parse() where we discover that LNet
is shutting down but we continue to use the NI when we drop the
message and end up calling ko2iblnd_check_send_locked() which tries to
allocate from the Tx pool which has been cleaned up already.
This triggers a NULL pointer dereference.

This fix just returns from lnet_parse() when we disover LNet is
shutting down.

Signed-off-by: Doug Oucharek <doug.s.oucharek@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8106
Reviewed-on: http://review.whamcloud.com/19993
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: set op_max_pages

Cache the maximum allowed pages supported by the llite
layer. This value will be used in the mdc and lmv layer.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7043
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3531
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: implement md_read_page

This patch adds md_read_page which is a new more
flexiable api that will replace md_readpage.

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/10761
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4906
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: build error with gcc 4.7.0 20110509

Fixed comparison between signed and unsigned indexes.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3775
Reviewed-on: http://review.whamcloud.com/7382
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: validate open handle cookies

Add a const void *h_owner member to struct portals_handle. Add a const
void *owner parameter to class_handle2object() which must be matched
by the h_owner member of the handle in addition to the cookie.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3233
Reviewed-on: http://review.whamcloud.com/6938
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: remove assert for acl refcount

The purpose of this asssert to was to ensure lustre
was properly managing its posix_acl access. This test
is invalid due to the VFS layer also taking references
on the posix_acl. In reality their is no simple way to
detect this class of mistakes.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: include: fix one off errors in lustre_id.h

During inspection of another patch Dan Carpenter noticed some
one off errors in lustre_id.h. Fix the condition test for
OBIF_MAX_OID.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: Automatically increase the max_dirty_mb

When RPC size or the max RPCs in flight is increased, the actual
limit might be max_dirty_mb. This patch automatically increases
the max_dirty_mb value at connection time and when the related
values are tuned manually by proc file system.

this patch also changes the unit of "cl_dirty" and "cl_dirty_max"
in client_obd from byte to page.

Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4933
Reviewed-on: http://review.whamcloud.com/10446
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: build master LMV EA dynamically build via readdir

When creating a striped directory, the master object saves the slave
objects (or shards) as internal sub-directories. The sub-directory's
name is composed of ${shard_FID}:${shard_idx}. With the name, we can
easily to know what the shard is and where it should be.

On the other hand, we need to store some information related with the
striped directory, such as magic, hash type, shards count, and so on.
That is the LMV EA (header). We do NOT store the FID of each shard in
the LMV EA. Instead, when we need the shards' FIDs (such as readdir()
on client-side), we can build the entrie LMV EA on the MDT (in RAM) by
iterating the sub-directory entries that are contained in the master
object of the striped directroy.

Above mechanism can simplify the striped directory create operation.
For very large striped directory, logging the FIDs array in the LMV
EA will be trouble. It also simplify the LFSCK for verifying striped
directory, because it reduces the inconsistency sources.

Another fixing is about the lmv_master_fid in master LMV EA header,
it is redundant information, and may become one of the inconsistency
sources. So replace it with two __u64 padding fields.

Signed-off-by: Fan Yong <fan.yong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5223
Reviewed-on: http://review.whamcloud.com/10751
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: request gets stuck in UNREGISTERING phase

Exit condition from UNREGISTERING phase is releasing of
both reply and bulk buffers.

Call ptlrpc_unregister_bulk() if ptlrpc_unregister_reply()
wasn't completed in async mode before switching to
UNREGISTERING phase.

Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5259
Xyratex-bug-id: MRP-1960
Reviewed-on: http://review.whamcloud.com/10846
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Ann Koehler <amk@cray.com>
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: try all stripes for unknown hash functions

For unknown hash type, LMV should try all stripes to locate
the name entry. But it will only for lookup and unlink, i.e.
we can only list and unlink entries under striped dir with
unknown hash type.

Signed-off-by: wang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4921
Reviewed-on: http://review.whamcloud.com/10041
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llog: keep llog ctxt indices constant

The llog context id table cannot be shrunk easily because that
will cause index shifting and incompatibility between old client
and new server and vice versa.

Patch moves llog_ctxt_id table to the lustre_idl.h because this is
wire protocol data, these values are added to the wirecheck.

Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5218
Reviewed-on: http://review.whamcloud.com/10758
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>