git.openwrt.org Git - openwrt/staging/blogic.git/log

arm64: Use a variable to store non-global mappings decision

Refactor the code which checks to see if we need to use non-global
mappings to use a variable instead of checking with the CPU capabilities
each time, doing the initial check for KPTI early in boot before we
start allocating memory so we still avoid transitioning to non-global
mappings in common cases.

Since this variable always matches our decision about non-global
mappings this means we can also combine arm64_kernel_use_ng_mappings()
and arm64_unmap_kernel_at_el0() into a single function, the variable
simply stores the result and the decision code is elsewhere. We could
just have the users check the variable directly but having a function
makes it clear that these uses are read-only.

The result is that we simplify the code a bit and reduces the amount of
code executed at runtime.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Don't use KPTI where we have E0PD

Since E0PD is intended to fulfil the same role as KPTI we don't need to
use KPTI on CPUs where E0PD is available, we can rely on E0PD instead.
Change the check that forces KPTI on when KASLR is enabled to check for
E0PD before doing so, CPUs with E0PD are not expected to be affected by
meltdown so should not need to enable KPTI for other reasons.

Since E0PD is a system capability we will still enable KPTI if any of
the CPUs in the system lacks E0PD, this will rewrite any global mappings
that were established in systems where some but not all CPUs support
E0PD. We may transiently have a mix of global and non-global mappings
while booting since we use the local CPU when deciding if KPTI will be
required prior to completing CPU enumeration but any global mappings
will be converted to non-global ones when KPTI is applied.

KPTI can still be forced on from the command line if required.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Factor out checks for KASLR in KPTI code into separate function

In preparation for integrating E0PD support with KASLR factor out the
checks for interaction between KASLR and KPTI done in boot context into
a new function kaslr_requires_kpti(), in the process clarifying the
distinction between what we do in boot context and what we do at
runtime.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

arm64: Add initial support for E0PD

Kernel Page Table Isolation (KPTI) is used to mitigate some speculation
based security issues by ensuring that the kernel is not mapped when
userspace is running but this approach is expensive and is incompatible
with SPE. E0PD, introduced in the ARMv8.5 extensions, provides an
alternative to this which ensures that accesses from userspace to the
kernel's half of the memory map to always fault with constant time,
preventing timing attacks without requiring constant unmapping and
remapping or preventing legitimate accesses.

Currently this feature will only be enabled if all CPUs in the system
support E0PD, if some CPUs do not support the feature at boot time then
the feature will not be enabled and in the unlikely event that a late
CPU is the first CPU to lack the feature then we will reject that CPU.

This initial patch does not yet integrate with KPTI, this will be dealt
with in followup patches. Ideally we could ensure that by default we
don't use KPTI on CPUs where E0PD is present.

Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[will: Fixed typo in Kconfig text]
Signed-off-by: Will Deacon <will@kernel.org>

Linux 5.5-rc3

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
"Eric's s_inodes softlockup fixes + Jan's fix for recent regression
  from pipe rework"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: call fsnotify_sb_delete after evict_inodes
  fs: avoid softlockups in s_inodes iterators
  pipe: Fix bogus dereference in iov_iter_alignment()

Merge tag 'xfs-5.5-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Fix a few bugs that could lead to corrupt files, fsck complaints, and
  filesystem crashes:

   - Minor documentation fixes

   - Fix a file corruption due to read racing with an insert range
     operation.

   - Fix log reservation overflows when allocating large rt extents

   - Fix a buffer log item flags check

   - Don't allow administrators to mount with sunit= options that will
     cause later xfs_repair complaints about the root directory being
     suspicious because the fs geometry appeared inconsistent

   - Fix a non-static helper that should have been static"

* tag 'xfs-5.5-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Make the symbol 'xfs_rtalloc_log_count' static
  xfs: don't commit sunit/swidth updates to disk if that would cause repair failures
  xfs: split the sunit parameter update into two parts
  xfs: refactor agfl length computation function
  libxfs: resync with the userspace libxfs
  xfs: use bitops interface for buf log item AIL flag check
  xfs: fix log reservation overflows when allocating large rt extents
  xfs: stabilize insert range start boundary to avoid COW writeback race
  xfs: fix Sphinx documentation warning

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bug fixes from Ted Ts'o:
"Ext4 bug fixes, including a regression fix"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: clarify impact of 'commit' mount option
  ext4: fix unused-but-set-variable warning in ext4_add_entry()
  jbd2: fix kernel-doc notation warning
  ext4: use RCU API in debug_print_tree
  ext4: validate the debug_want_extra_isize mount option at parse time
  ext4: reserve revoke credits in __ext4_new_inode
  ext4: unlock on error in ext4_expand_extra_isize()
  ext4: optimize __ext4_check_dir_entry()
  ext4: check for directory entries too close to block end
  ext4: fix ext4_empty_dir() for directories with holes

Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Let's try this one again, this time without the compat_ioctl changes.
  We've got those fixed up, but that can go out next week.

  This contains:

   - block queue flush lockdep annotation (Bart)

   - Type fix for bsg_queue_rq() (Bart)

   - Three dasd fixes (Stefan, Jan)

   - nbd deadlock fix (Mike)

   - Error handling bio user map fix (Yang)

   - iocost fix (Tejun)

   - sbitmap waitqueue addition fix that affects the kyber IO scheduler
     (David)"

* tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block:
  sbitmap: only queue kyber's wait callback if not already active
  block: fix memleak when __blk_rq_map_user_iov() is failed
  s390/dasd: fix typo in copyright statement
  s390/dasd: fix memleak in path handling error case
  s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly
  block: Fix a lockdep complaint triggered by request queue flushing
  block: Fix the type of 'sts' in bsg_queue_rq()
  block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
  nbd: fix shutdown and recv work deadlock v2
  iocost: over-budget forced IOs should schedule async delay

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"PPC:
   - Fix a bug where we try to do an ultracall on a system without an
     ultravisor

  KVM:
   - Fix uninitialised sysreg accessor
   - Fix handling of demand-paged device mappings
   - Stop spamming the console on IMPDEF sysregs
   - Relax mappings of writable memslots
   - Assorted cleanups

  MIPS:
   - Now orphan, James Hogan is stepping down

  x86:
   - MAINTAINERS change, so long Radim and thanks for all the fish
   - supported CPUID fixes for AMD machines without SPEC_CTRL"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MAINTAINERS: remove Radim from KVM maintainers
  MAINTAINERS: Orphan KVM for MIPS
  kvm: x86: Host feature SSBD doesn't imply guest feature AMD_SSBD
  kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD
  KVM: PPC: Book3S HV: Don't do ultravisor calls on systems without ultravisor
  KVM: arm/arm64: Properly handle faulting of device mappings
  KVM: arm64: Ensure 'params' is initialised when looking up sys register
  KVM: arm/arm64: Remove excessive permission check in kvm_arch_prepare_memory_region
  KVM: arm64: Don't log IMP DEF sysreg traps
  KVM: arm64: Sanely ratelimit sysreg messages
  KVM: arm/arm64: vgic: Use wrapper function to lock/unlock all vcpus in kvm_vgic_create()
  KVM: arm/arm64: vgic: Fix potential double free dist->spis in __kvm_vgic_destroy()
  KVM: arm/arm64: Get rid of unused arg in cpu_init_hyp_mode()

Merge tag 'riscv/for-v5.5-rc3' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
"Several fixes, and one cleanup, for RISC-V.

  Fixes:

   - Fix an error in a Kconfig file that resulted in an undefined
     Kconfig option "CONFIG_CONFIG_MMU"

   - Fix undefined Kconfig option "CONFIG_CONFIG_MMU"

   - Fix scratch register clearing in M-mode (affects nommu users)

   - Fix a mismerge on my part that broke the build for
     CONFIG_SPARSEMEM_VMEMMAP users

  Cleanup:

   - Move SiFive L2 cache-related code to drivers/soc, per request"

* tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: move sifive_l2_cache.c to drivers/soc
  riscv: define vmemmap before pfn_to_page calls
  riscv: fix scratch register clearing in M-mode.
  riscv: Fix use of undefined config option CONFIG_CONFIG_MMU

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
    including adding a missing ipv6 match description.

2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
    Bhat.

3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.

4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.

5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.

6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
    Chaignon.

7) Multicast MAC limit test is off by one in qede, from Manish Chopra.

8) Fix established socket lookup race when socket goes from
    TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
    RCU grace period. From Eric Dumazet.

9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.

10) Fix active backup transition after link failure in bonding, from
    Mahesh Bandewar.

11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.

12) Fix wrong interface passed to ->mac_link_up(), from Russell King.

13) Fix DSA egress flooding settings in b53, from Florian Fainelli.

14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.

15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.

16) Reject invalid MTU values in stmmac, from Jose Abreu.

17) Fix refcount leak in error path of u32 classifier, from Davide
    Caratti.

18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
    Kaseorg.

19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.

20) Disable hardware GRO when XDP is attached to qede, frm Manish
    Chopra.

21) Since we encode state in the low pointer bits, dst metrics must be
    at least 4 byte aligned, which is not necessarily true on m68k. Add
    annotations to fix this, from Geert Uytterhoeven.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
  sfc: Include XDP packet headroom in buffer step size.
  sfc: fix channel allocation with brute force
  net: dst: Force 4-byte alignment of dst_metrics
  selftests: pmtu: fix init mtu value in description
  hv_netvsc: Fix unwanted rx_table reset
  net: phy: ensure that phy IDs are correctly typed
  mod_devicetable: fix PHY module format
  qede: Disable hardware gro when xdp prog is installed
  net: ena: fix issues in setting interrupt moderation params in ethtool
  net: ena: fix default tx interrupt moderation interval
  net/smc: unregister ib devices in reboot_event
  net: stmmac: platform: Fix MDIO init for platforms without PHY
  llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
  net: hisilicon: Fix a BUG trigered by wrong bytes_compl
  net: dsa: ksz: use common define for tag len
  s390/qeth: don't return -ENOTSUPP to userspace
  s390/qeth: fix promiscuous mode after reset
  s390/qeth: handle error due to unsupported transport mode
  cxgb4: fix refcount init for TC-MQPRIO offload
  tc-testing: initial tdc selftests for cls_u32
  ...

pipe: fix empty pipe check in pipe_write()

LTP pipeio_1 test is hanging with v5.5-rc2-385-gb8e382a185eb,
with read side observing empty pipe and sleeping and write
side running out of space and then sleeping as well. In this
scenario there are 5 writers and 1 reader.

Problem is that after pipe_write() reacquires pipe lock, it
re-checks for empty pipe with potentially stale 'head' and
doesn't wake up read side anymore. pipe->tail can advance
beyond 'head', because there are multiple writers.

Use pipe->head for empty pipe check after reacquiring lock
to observe current state.

Testing: With patch, LTP pipeio_1 ran successfully in loop for 1 hour.
Without patch it hanged within a minute.

Fixes: 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup logic")
Reported-by: Rachel Sibley <rasibley@redhat.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kvm-ppc-fixes-5.5-1' of git://git./linux/kernel/git/paulus/powerpc into kvm-master

PPC KVM fix for 5.5

- Fix a bug where we try to do an ultracall on a system without an
ultravisor.

MAINTAINERS: remove Radim from KVM maintainers

Radim's kernel.org email is bouncing, which I take as a signal that
he is not really able to deal with KVM at this time. Make MAINTAINERS
match the effective value of KVM's bus factor.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

MAINTAINERS: Orphan KVM for MIPS

I haven't been active for 18 months, and don't have the hardware set up
to test KVM for MIPS, so mark it as orphaned and remove myself as
maintainer. Hopefully somebody from MIPS can pick this up.

Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ext4: clarify impact of 'commit' mount option

The description of 'commit' mount option dates back to ext3 times.
Update the description to match current meaning for ext4.

Reported-by: Paul Richards <paul.richards@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20191218111210.14161-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

ext4: fix unused-but-set-variable warning in ext4_add_entry()

Warning is found when compile with "-Wunused-but-set-variable":

fs/ext4/namei.c: In function ‘ext4_add_entry’:
fs/ext4/namei.c:2167:23: warning: variable ‘sbi’ set but not used
[-Wunused-but-set-variable]
struct ext4_sb_info *sbi;
^~~
Fix this by moving the variable @sbi under CONFIG_UNICODE.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/cb5eb904-224a-9701-c38f-cb23514b1fff@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Merge tag 'trace-v5.5-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix memory leak on error path of process_system_preds()

- Lock inversion fix with updating tgid recording option

- Fix histogram compare function on big endian machines

- Fix histogram trigger function on big endian machines

- Make trace_printk() irq sync on init for kprobe selftest correctness

* tag 'trace-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix endianness bug in histogram trigger
  samples/trace_printk: Wait for IRQ work to finish
  tracing: Fix lock inversion in trace_event_enable_tgid_record()
  tracing: Have the histogram compare functions convert to u64 first
  tracing: Avoid memory leak in process_system_preds()

Merge tag 'libnvdimm-fix-5.5-rc3' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fix from Dan Williams:
"A minor regression fix.

  The libnvdimm unit tests were expecting to mock calls to
  ioremap_nocache() which disappeared in v5.5-rc1. This fix has appeared
  in -next and collided with some cleanups that Christoph has planned
  for v5.6, but he will fix up his branch once this goes in.

  Summary:

   - Restore the operation of the libnvdimm unit tests after the removal
     of ioremap_nocache()"

* tag 'libnvdimm-fix-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  tools/testing/nvdimm: Fix mock support for ioremap

tracing: Fix endianness bug in histogram trigger

At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.

Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events")
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

samples/trace_printk: Wait for IRQ work to finish

trace_printk schedules work via irq_work_queue(), but doesn't
wait until it was processed. The kprobe_module.tc testcase does:

:;: "Load module again, which means the event1 should be recorded";:
modprobe trace-printk
grep "event1:" trace

so the grep which checks the trace file might run before the irq work
was processed. Fix this by adding a irq_work_sync().

Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-3-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes: af2a0750f3749 ("selftests/ftrace: Improve kprobe on module testcase to load/unload module")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tracing: Fix lock inversion in trace_event_enable_tgid_record()

       Task T2                             Task T3
trace_options_core_write()            subsystem_open()

mutex_lock(trace_types_lock)           mutex_lock(event_mutex)

set_tracer_flag()

   trace_event_enable_tgid_record()       mutex_lock(trace_types_lock)

    mutex_lock(event_mutex)

This gives a circular dependency deadlock between trace_types_lock and
event_mutex. To fix this invert the usage of trace_types_lock and
event_mutex in trace_options_core_write(). This keeps the sequence of
lock usage consistent.

Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com
Cc: stable@vger.kernel.org
Fixes: d914ba37d7145 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Merge tag 's390-5.5-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

- Fix unwinding from irq context of interrupted user process.

- Add purgatory build missing symbols check. That helped to uncover and
   fix missing symbols when built with kasan support enabled.

- Couple of ftrace fixes. Avoid broken stack trace and fix recursion
   loop in function_graph tracer.

* tag 's390-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ftrace: save traced function caller
  s390/unwind: stop gracefully at user mode pt_regs in irq stack
  s390/purgatory: do not build purgatory with kcov, kasan and friends
  s390/purgatory: Make sure we fail the build if purgatory has missing symbols
  s390/ftrace: fix endless recursion in function_graph tracer

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a (rare) PSI crash fix, a CPU affinity related balancing
  fix, and a toning down of active migration attempts"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cfs: fix spurious active migration
  sched/fair: Fix find_idlest_group() to handle CPU affinity
  psi: Fix a division error in psi poll()
  sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"Misc fixes: a BTS fix, a PT NMI handling fix, a PMU sysfs fix and an
  SRCU annotation"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Add SRCU annotation for pmus list walk
  perf/x86/intel: Fix PT PMI handling
  perf/x86/intel/bts: Fix the use of page_private()
  perf/x86: Fix potential out-of-bounds access

Merge tag 'kbuild-fixes-v5.5' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- fix warning in out-of-tree 'make clean'

- add READELF variable to the top Makefile

- fix broken builds when LINUX_COMPILE_BY contains a backslash

- fix build warning in kallsyms

- fix NULL pointer access in expr_eq() in Kconfig

- fix missing dependency on rsync in deb-pkg build

- remove ---help--- from documentation

- fix misleading documentation about directory descending

* tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: clarify the difference between obj-y and obj-m w.r.t. descending
  kconfig: remove ---help--- from documentation
  scripts: package: mkdebian: add missing rsync dependency
  kconfig: don't crash on NULL expressions in expr_eq()
  scripts/kallsyms: fix offset overflow of kallsyms_relative_base
  mkcompile_h: use printf for LINUX_COMPILE_BY
  mkcompile_h: git rid of UTS_TRUNCATE from LINUX_COMPILE_{BY,HOST}
  x86/boot: kbuild: allow readelf executable to be specified
  kbuild: fix 'No such file or directory' warning when cleaning

kbuild: clarify the difference between obj-y and obj-m w.r.t. descending

Kbuild descends into a directory by either 'y' or 'm', but there is an
important difference.

Kbuild combines the built-in objects into built-in.a in each directory.
The built-in.a in the directory visited by obj-y is merged into the
built-in.a in the parent directory. This merge happens recursively
when Kbuild is ascending back towards the top directory, then built-in
objects are linked into vmlinux eventually. This works properly only
when the Makefile specifying obj-y is reachable by the chain of obj-y.

On the other hand, Kbuild does not take built-in.a from the directory
visited by obj-m. This it, all the objects in that directory are
supposed to be modular. If Kbuild descends into a directory by obj-m,
but the Makefile in the sub-directory specifies obj-y, those objects
are just left orphan.

The current statement "Kbuild only uses this information to decide that
it needs to visit the directory" is misleading. Clarify the difference.

Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Johan Hovold <johan@kernel.org>

Merge branch 'parisc-5.5-2' of git://git./linux/kernel/git/deller/parisc-linux

Pul parisc fixes from Helge Deller:
"Two build error fixes, one for the soft_offline_page() parameter
  change and one for a specific KEXEC/KEXEC_FILE configuration, as well
  as a compiler and a linker warning fix"

* 'parisc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix compiler warnings in debug_core.c
  parisc: soft_offline_page() now takes the pfn
  parisc: add missing __init annotation
  parisc: fix compilation when KEXEC=n and KEXEC_FILE=y

Merge tag 'for-linus-5.5b-rc3-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"This contains two cleanup patches and a small series for supporting
  reloading the Xen block backend driver"

* tag 'for-linus-5.5b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/grant-table: remove multiple BUG_ON on gnttab_interface
  xen-blkback: support dynamic unbind/bind
  xen/interface: re-define FRONT/BACK_RING_ATTACH()
  xenbus: limit when state is forced to closed
  xenbus: move xenbus_dev_shutdown() into frontend code...
  xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk

Merge tag 'powerpc-5.5-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Two weeks worth of accumulated fixes:

   - A fix for a performance regression seen on PowerVM LPARs using
     dedicated CPUs, caused by our vcpu_is_preempted() returning true
     even for idle CPUs.

   - One of the ultravisor support patches broke KVM on big endian hosts
     in v5.4.

   - Our KUAP (Kernel User Access Prevention) code missed allowing
     access in __clear_user(), which could lead to an oops or erroneous
     SEGV when triggered via PTRACE_GETREGSET.

   - Two fixes for the ocxl driver, an open/remove race, and a memory
     leak in an error path.

   - A handful of other small fixes.

  Thanks to: Andrew Donnellan, Christian Zigotzky, Christophe Leroy,
  Christoph Hellwig, Daniel Axtens, David Hildenbrand, Frederic Barrat,
  Gautham R. Shenoy, Greg Kurz, Ihor Pasichnyk, Juri Lelli, Marcus
  Comstedt, Mike Rapoport, Parth Shah, Srikar Dronamraju, Vaidyanathan
  Srinivasan"

* tag 'powerpc-5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix regression on big endian hosts
  powerpc: Fix __clear_user() with KUAP enabled
  powerpc/pseries/cmm: fix managed page counts when migrating pages between zones
  powerpc/8xx: fix bogus __init on mmu_mapin_ram_chunk()
  ocxl: Fix potential memory leak on context creation
  powerpc/irq: fix stack overflow verification
  powerpc: Ensure that swiotlb buffer is allocated from low memory
  powerpc/shared: Use static key to detect shared processor
  powerpc/vcpu: Assume dedicated processors as non-preempt
  ocxl: Fix concurrent AFU open and device removal

Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 RAS fixes from Borislav Petkov:
"Three urgent RAS fixes for the AMD side of things:

   - initialize struct mce.bank so that calculated error severity on AMD
     SMCA machines is correct

   - do not send IPIs early during bank initialization, when interrupts
     are disabled

   - a fix for when only a subset of MCA banks are enabled, which led to
     boot hangs on some new AMD CPUs"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix possibly incorrect severity calculation on AMD
  x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[]
  x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure()

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"One core framework fix to walk the orphan list and match up clks to
  parents when clk providers register the DT provider after registering
  all their clks (as they should).

  Then a handful of driver fixes for the qcom, imx, and at91 drivers.

  The driver fixes are relatively small fixes for incorrect register
  settings or missing locks causing race conditions"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: Avoid SMMU/cx gdsc corner cases
  clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs
  clk: Move clk_core_reparent_orphans() under CONFIG_OF
  clk: at91: fix possible deadlock
  clk: walk orphan list on clock provider registration
  clk: imx: pll14xx: fix clk_pll14xx_wait_lock
  clk: imx: clk-imx7ulp: Add missing sentinel of ulp_div_table
  clk: imx: clk-composite-8m: add lock to gate/mux

Merge branch 'sfc-fix-bugs-introduced-by-XDP-patches'

Edward Cree says:

====================
sfc: fix bugs introduced by XDP patches

Two fixes for bugs introduced by the XDP support in the sfc driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: Include XDP packet headroom in buffer step size.

Correct a mismatch between rx_page_buf_step and the actual step size
used when filling buffer pages.

This patch fixes the page overrun that occured when the MTU was set to
anything bigger than 1692.

Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Charles McLachlan <cmclachlan@solarflare.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: fix channel allocation with brute force

It was possible for channel allocation logic to get confused between what
it had and what it wanted, and end up trying to use the same channel for
both PTP and regular TX.  This led to a kernel panic:
    BUG: unable to handle page fault for address: 0000000000047635
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    PGD 0 P4D 0
    Oops: 0002 [#1] SMP PTI
    CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.4.0-rc3-ehc14+ #900
    Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
    RIP: 0010:native_queued_spin_lock_slowpath+0x188/0x1e0
    Code: f3 90 48 8b 32 48 85 f6 74 f6 eb e8 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 c0 98 02 00 48 03 04 f5 a0 c6 ed 81 <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32
    RSP: 0018:ffffc90000003d28 EFLAGS: 00010006
    RAX: 0000000000047635 RBX: 0000000000000246 RCX: 0000000000040000
    RDX: ffff888627a298c0 RSI: 0000000000003ffe RDI: ffff88861f6b8dd4
    RBP: ffff8886225c6e00 R08: 0000000000040000 R09: 0000000000000000
    R10: 0000000616f080c6 R11: 00000000000000c0 R12: ffff88861f6b8dd4
    R13: ffffc90000003dc8 R14: ffff88861942bf00 R15: ffff8886150f2000
    FS:  0000000000000000(0000) GS:ffff888627a00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000047635 CR3: 000000000200a000 CR4: 00000000000006f0
    Call Trace:
     <IRQ>
     _raw_spin_lock_irqsave+0x22/0x30
     skb_queue_tail+0x1b/0x50
     sock_queue_err_skb+0x9d/0xf0
     __skb_complete_tx_timestamp+0x9d/0xc0
     efx_dequeue_buffer+0x126/0x180 [sfc]
     efx_xmit_done+0x73/0x1c0 [sfc]
     efx_ef10_ev_process+0x56a/0xfe0 [sfc]
     ? tick_sched_do_timer+0x60/0x60
     ? timerqueue_add+0x5d/0x70
     ? enqueue_hrtimer+0x39/0x90
     efx_poll+0x111/0x380 [sfc]
     ? rcu_accelerate_cbs+0x50/0x160
     net_rx_action+0x14a/0x400
     __do_softirq+0xdd/0x2d0
     irq_exit+0xa0/0xb0
     do_IRQ+0x53/0xe0
     common_interrupt+0xf/0xf
     </IRQ>

In the long run we intend to rewrite the channel allocation code, but for
'net' fix this by allocating extra_channels, and giving them TX queues,
even if we do not in fact need them (e.g. on NICs without MAC TX
timestamping), and thereby using simpler logic to assign the channels
once they're allocated.

Fixes: 3990a8fffbda ("sfc: allocate channels for XDP tx queues")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dst: Force 4-byte alignment of dst_metrics

When storing a pointer to a dst_metrics structure in dst_entry._metrics,
two flags are added in the least significant bits of the pointer value.
Hence this assumes all pointers to dst_metrics structures have at least
4-byte alignment.

However, on m68k, the minimum alignment of 32-bit values is 2 bytes, not
4 bytes.  Hence in some kernel builds, dst_default_metrics may be only
2-byte aligned, leading to obscure boot warnings like:

    WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x44/0x9a
    refcount_t: underflow; use-after-free.
    Modules linked in:
    CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G        W         5.5.0-rc2-atari-01448-g114a1a1038af891d-dirty #261
    Stack from 10835e6c:
    10835e6c 0038134f 00023fa6 00394b0f 0000001c 00000009 00321560 00023fea
    00394b0f 0000001c 001a70f8 00000009 00000000 10835eb4 00000001 00000000
    04208040 0000000a 00394b4a 10835ed4 00043aa8 001a70f8 00394b0f 0000001c
    00000009 00394b4a 0026aba8 003215a4 00000003 00000000 0026d5a8 00000001
    003215a4 003a4361 003238d6 000001f0 00000000 003215a4 10aa3b00 00025e84
    003ddb00 10834000 002416a8 10aa3b00 00000000 00000080 000aa038 0004854a
    Call Trace: [<00023fa6>] __warn+0xb2/0xb4
     [<00023fea>] warn_slowpath_fmt+0x42/0x64
     [<001a70f8>] refcount_warn_saturate+0x44/0x9a
     [<00043aa8>] printk+0x0/0x18
     [<001a70f8>] refcount_warn_saturate+0x44/0x9a
     [<0026aba8>] refcount_sub_and_test.constprop.73+0x38/0x3e
     [<0026d5a8>] ipv4_dst_destroy+0x5e/0x7e
     [<00025e84>] __local_bh_enable_ip+0x0/0x8e
     [<002416a8>] dst_destroy+0x40/0xae

Fix this by forcing 4-byte alignment of all dst_metrics structures.

Fixes: e5fd387ad5b30ca3 ("ipv6: do not overwrite inetpeer metrics prematurely")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: pmtu: fix init mtu value in description

There is no a_r3, a_r4 in the testing topology.
It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500.

Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Fix unwanted rx_table reset

In existing code, the receive indirection table, rx_table, is in
struct rndis_device, which will be reset when changing MTU, ringparam,
etc. User configured receive indirection table values will be lost.

To fix this, move rx_table to struct net_device_context, and check
netif_is_rxfh_configured(), so rx_table will be set to default only
if no user configured value.

Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: ensure that phy IDs are correctly typed

PHY IDs are 32-bit unsigned quantities. Ensure that they are always
treated as such, and not passed around as "int"s.

Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

mod_devicetable: fix PHY module format

When a PHY is probed, if the top bit is set, we end up requesting a
module with the string "mdio:-10101110000000100101000101010001" -
the top bit is printed to a signed -1 value. This leads to the module
not being loaded.

Fix the module format string and the macro generating the values for
it to ensure that we only print unsigned types and the top bit is
always 0/1. We correctly end up with
"mdio:10101110000000100101000101010001".

Fixes: 8626d3b43280 ("phylib: Support phy module autoloading")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qede: Disable hardware gro when xdp prog is installed

commit 18c602dee472 ("qede: Use NETIF_F_GRO_HW.") introduced
a regression in driver that when xdp program is installed on
qede device, device's aggregation feature (hardware GRO) is not
getting disabled, which is unexpected with xdp.

Fixes: 18c602dee472 ("qede: Use NETIF_F_GRO_HW.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ena-fixes-of-interrupt-moderation-bugs'

Arthur Kiyanovski says:

====================
ena: fixes of interrupt moderation bugs

Differences from V1:
1. Updated default tx interrupt moderation to 64us
2. Added "Fixes:" tags.
3. Removed cosmetic changes that are not relevant for these bug fixes

This patchset includes a couple of fixes of bugs in the implemenation of
interrupt moderation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix issues in setting interrupt moderation params in ethtool

Issue 1:
--------
Reproduction steps:
1. sudo ethtool -C eth0 rx-usecs 128
2. sudo ethtool -C eth0 adaptive-rx on
3. sudo ethtool -C eth0 adaptive-rx off
4. ethtool -c eth0

expected output: rx-usecs 128
actual output: rx-usecs 0

Reason for issue:
In stage 3, ethtool userspace calls first the ena_get_coalesce() handler
to get the current value of all properties, and then the ena_set_coalesce()
handler. When ena_get_coalesce() is called the adaptive interrupt
moderation is still on. There is an if in the code that returns the
rx_coalesce_usecs only if the adaptive interrupt moderation is off.
And since it is still on, rx_coalesce_usecs is not set, meaning it
stays 0.

Solution to issue:
Remove this if static interrupt moderation intervals have nothing to do
with dynamic ones.

Issue 2:
--------
Reproduction steps:
1. sudo ethtool -C eth0 adaptive-rx on
2. sudo ethtool -C eth0 rx-usecs 128
3. ethtool -c eth0

expected output: rx-usecs 128
actual output: rx-usecs 0

Reason for issue:
In stage 2, when ena_set_coalesce() is called, the handler tests if
rx adaptive interrupt moderation is on, and if it is, it returns before
getting to the part in the function that sets the rx non-adaptive
interrupt moderation interval.

Solution to issue:
Remove the return from the function when rx adaptive interrupt moderation
is on.

Also cleaned up the fixed code in ena_set_coalesce by grouping together
adaptive interrupt moderation toggling, and using && instead of nested
ifs.

Fixes: b3db86dc4b82 ("net: ena: reimplement set/get_coalesce()")
Fixes: 0eda847953d8 ("net: ena: fix retrieval of nonadaptive interrupt moderation intervals")
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ena: fix default tx interrupt moderation interval

Current default non-adaptive tx interrupt moderation interval is 196 us.
This value is too high and might cause the tx queue to fill up.

In this commit we set the default non-adaptive tx interrupt moderation
interval to 64 us in order to:
1. Reduce the probability of the queue filling-up (when compared to the
   current default value of 196 us).
2. Reduce unnecessary tx interrupt overhead (which happens if we set the
   default tx interval to 0).
   We determined experimentally that 64 us is an optimal value that
   reduces interrupt rate by more than 20% without affecting performance.

Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/smc: unregister ib devices in reboot_event

In the reboot_event handler, unregister the ib devices and enable
the IB layer to release the devices before the reboot.

Fixes: a33a803cfe64 ("net/smc: guarantee removal of link groups in reboot")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: platform: Fix MDIO init for platforms without PHY

The current implementation of "stmmac_dt_phy" function initializes
the MDIO platform bus data, even in the absence of PHY. This fix
will skip MDIO initialization if there is no PHY present.

Fixes: 7437127 ("net: stmmac: Convert to phylink and remove phylib logic")
Acked-by: Jayati Sahu <jayati.sahu@samsung.com>
Signed-off-by: Sriram Dash <sriram.dash@samsung.com>
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)

When a frame with NULL DSAP is received, llc_station_rcv is called.
In turn, llc_stat_ev_rx_null_dsap_xid_c is called to check if it is a NULL
XID frame. The return statement of llc_stat_ev_rx_null_dsap_xid_c returns 1
when the incoming frame is not a NULL XID frame and 0 otherwise. Hence, a
NULL XID response is returned unexpectedly, e.g. when the incoming frame is
a NULL TEST command.

To fix the error, simply remove the conditional operator.

A similar error in llc_stat_ev_rx_null_dsap_test_c is also fixed.

Signed-off-by: Chan Shu Tak, Alex <alexchan@task.com.hk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hisilicon: Fix a BUG trigered by wrong bytes_compl

When doing stress test, we get the following trace:
kernel BUG at lib/dynamic_queue_limits.c:26!
Internal error: Oops - BUG: 0 [#1] SMP ARM
Modules linked in: hip04_eth
CPU: 0 PID: 2003 Comm: tDblStackPcap0 Tainted: G           O L  4.4.197 #1
Hardware name: Hisilicon A15
task: c3637668 task.stack: de3bc000
PC is at dql_completed+0x18/0x154
LR is at hip04_tx_reclaim+0x110/0x174 [hip04_eth]
pc : [<c041abfc>]    lr : [<bf0003a8>]    psr: 800f0313
sp : de3bdc2c  ip : 00000000  fp : c020fb10
r10: 00000000  r9 : c39b4224  r8 : 00000001
r7 : 00000046  r6 : c39b4000  r5 : 0078f392  r4 : 0078f392
r3 : 00000047  r2 : 00000000  r1 : 00000046  r0 : df5d5c80
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 32c5387d  Table: 1e189b80  DAC: 55555555
Process tDblStackPcap0 (pid: 2003, stack limit = 0xde3bc190)
Stack: (0xde3bdc2c to 0xde3be000)
[<c041abfc>] (dql_completed) from [<bf0003a8>] (hip04_tx_reclaim+0x110/0x174 [hip04_eth])
[<bf0003a8>] (hip04_tx_reclaim [hip04_eth]) from [<bf0012c0>] (hip04_rx_poll+0x20/0x388 [hip04_eth])
[<bf0012c0>] (hip04_rx_poll [hip04_eth]) from [<c04c8d9c>] (net_rx_action+0x120/0x374)
[<c04c8d9c>] (net_rx_action) from [<c021eaf4>] (__do_softirq+0x218/0x318)
[<c021eaf4>] (__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac)
[<c021eea0>] (irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4)
[<c0240130>] (msa_irq_exit) from [<c0267ba8>] (__handle_domain_irq+0x110/0x148)
[<c0267ba8>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118)
[<c0201588>] (gic_handle_irq) from [<c0558360>] (__irq_svc+0x40/0x58)
Exception stack(0xde3bdde0 to 0xde3bde28)
dde0: 00000000 00008001 c3637668 00000000 00000000 a00f0213 dd3627a0 c0af6380
de00: c086d380 a00f0213 c0a22a50 de3bde6c 00000002 de3bde30 c0558138 c055813c
de20: 600f0213 ffffffff
[<c0558360>] (__irq_svc) from [<c055813c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
Kernel panic - not syncing: Fatal exception in interrupt

Pre-modification code:
int hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
{
[...]
[1] priv->tx_head = TX_NEXT(tx_head);
[2] count++;
[3] netdev_sent_queue(ndev, skb->len);
[...]
}
An rx interrupt occurs if hip04_mac_start_xmit just executes to the line 2,
tx_head has been updated, but corresponding 'skb->len' has not been
added to dql_queue.

And then
hip04_mac_interrupt->__napi_schedule->hip04_rx_poll->hip04_tx_reclaim

In hip04_tx_reclaim, because tx_head has been updated,
bytes_compl will plus an additional "skb-> len"
which has not been added to dql_queue. And then
trigger the BUG_ON(bytes_compl > num_queued - dql->num_completed).

To solve the problem described above, we put
"netdev_sent_queue(ndev, skb->len);"
before
"priv->tx_head = TX_NEXT(tx_head);"

Fixes: a41ea46a9a12 ("net: hisilicon: new hip04 ethernet driver")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: ksz: use common define for tag len

Remove special taglen define KSZ8795_INGRESS_TAG_LEN
and use generic KSZ_INGRESS_TAG_LEN instead.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 's390-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2019-12-18

please apply the following patch series to your net tree.
This brings two fixes for initialization / teardown issues, and one
ENOTSUPP cleanup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: don't return -ENOTSUPP to userspace

ENOTSUPP is not uapi, use EOPNOTSUPP instead.

Fixes: d66cb37e9664 ("qeth: Add new priority queueing options")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: fix promiscuous mode after reset

When managing the promiscuous mode during an RX modeset, qeth caches the
current HW state to avoid repeated programming of the same state on each
modeset.

But while tearing down a device, we forget to clear the cached state. So
when the device is later set online again, the initial RX modeset
doesn't program the promiscuous mode since we believe it is already
enabled.
Fix this by clearing the cached state in the tear-down path.

Note that for the SBP variant of promiscuous mode, this accidentally
works right now because we unconditionally restore the SBP role while
re-initializing.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: handle error due to unsupported transport mode

Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.

On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sbitmap: only queue kyber's wait callback if not already active

Under heavy loads where the kyber I/O scheduler hits the token limits for
its scheduling domains, kyber can become stuck.  When active requests
complete, kyber may not be woken up leaving the I/O requests in kyber
stuck.

This stuck state is due to a race condition with kyber and the sbitmap
functions it uses to run a callback when enough requests have completed.
The running of a sbt_wait callback can race with the attempt to insert the
sbt_wait.  Since sbitmap_del_wait_queue removes the sbt_wait from the list
first then sets the sbq field to NULL, kyber can see the item as not on a
list but the call to sbitmap_add_wait_queue will see sbq as non-NULL. This
results in the sbt_wait being inserted onto the wait list but ws_active
doesn't get incremented.  So the sbitmap queue does not know there is a
waiter on a wait list.

Since sbitmap doesn't think there is a waiter, kyber may never be
informed that there are domain tokens available and the I/O never advances.
With the sbt_wait on a wait list, kyber believes it has an active waiter
so cannot insert a new waiter when reaching the domain's full state.

This race can be fixed by only adding the sbt_wait to the queue if the
sbq field is NULL.  If sbq is not NULL, there is already an action active
which will trigger the re-running of kyber.  Let it run and add the
sbt_wait to the wait list if still needing to wait.

Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reported-by: John Pittman <jpittman@redhat.com>
Tested-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

cxgb4: fix refcount init for TC-MQPRIO offload

Properly initialize refcount to 1 when hardware queue arrays for
TC-MQPRIO offload have been freshly allocated. Otherwise, following
warning is observed. Also fix up error path to only free hardware
queue arrays when refcount reaches 0.

[  130.075342] ------------[ cut here ]------------
[  130.075343] refcount_t: addition on 0; use-after-free.
[  130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25
refcount_warn_saturate+0xe1/0x100
[  130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser
libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb
ib_uverbs x86_pkg_temp_thermal cxgb4 igb
[  130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted
5.5.0-rc1+ #11
[  130.075362] Hardware name: Supermicro
X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2
01/16/2015
[  130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100
[  130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85
63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1
ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40
[  130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286
[  130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX:
0000000000000001
[  130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI:
ffff8a2e9fa187d0
[  130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09:
000000000000003c
[  130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12:
ffffa48d00c0b848
[  130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15:
0000000000000031
[  130.075368] FS:  00007f689015f840(0000) GS:ffff8a2e9fa00000(0000)
knlGS:0000000000000000
[  130.075369] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4:
00000000001606f0
[  130.075370] Call Trace:
[  130.075377]  cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4]
[  130.075382]  ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4]
[  130.075384]  ? pfifo_fast_init+0x7e/0xf0
[  130.075386]  mqprio_init+0x5f4/0x630 [sch_mqprio]
[  130.075389]  qdisc_create+0x1bf/0x4a0
[  130.075390]  tc_modify_qdisc+0x1ff/0x770
[  130.075392]  rtnetlink_rcv_msg+0x28b/0x350
[  130.075394]  ? rtnl_calcit.isra.32+0x110/0x110
[  130.075395]  netlink_rcv_skb+0xc6/0x100
[  130.075396]  netlink_unicast+0x1db/0x330
[  130.075397]  netlink_sendmsg+0x2f5/0x460
[  130.075399]  ? _copy_from_user+0x2e/0x60
[  130.075400]  sock_sendmsg+0x59/0x70
[  130.075401]  ____sys_sendmsg+0x1f0/0x230
[  130.075402]  ? copy_msghdr_from_user+0xd7/0x140
[  130.075403]  ___sys_sendmsg+0x77/0xb0
[  130.075404]  ? ___sys_recvmsg+0x84/0xb0
[  130.075406]  ? __handle_mm_fault+0x377/0xaf0
[  130.075407]  __sys_sendmsg+0x53/0xa0
[  130.075409]  do_syscall_64+0x44/0x130
[  130.075412]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  130.075413] RIP: 0033:0x7f688f13af10
[  130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff
eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24
[  130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[  130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX:
00007f688f13af10
[  130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI:
0000000000000003
[  130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09:
0000000000008000
[  130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12:
0000000000000000
[  130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15:
000000000067c600
[  130.075418] ---[ end trace 8fbb3bf36a8671db ]---

v2:
- Move the refcount_set() closer to where the hardware queue arrays
  are being allocated.
- Fix up error path to only free hardware queue arrays when refcount
  reaches 0.

Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'devicetree-fixes-for-5.5-2' of git://git./linux/kernel/git/robh/linux

Pull Devicetree fix from Rob Herring:
"Add missing 'properties' keyword enclosing 'snps,tso' in snps,dwmac
binding"

* tag 'devicetree-fixes-for-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Add missing 'properties' keyword enclosing 'snps,tso'

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Leftover put_cpu() in the perf/smmuv3 error path.

- Add Hisilicon TSV110 to spectre-v2 safe list

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list
perf/smmuv3: Remove the leftover put_cpu() in error path

Merge tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Probably the last one before Christmas, I'll see if there is much
  demand over next few weeks for more fixes, I expect it'll be quiet
  enough.

  This has one exynos fix, and a bunch of i915 core and i915 GVT fixes.

  Summary:

  exynos:
   - component delete fix

  i915:
   - Fix to drop an unused and harmful display W/A
   - Fix to define EHL power wells independent of ICL
   - Fix for priority inversion on bonded requests
   - Fix in mmio offset calculation of DSB instance
   - Fix memory leak from get_task_pid when banning clients
   - Fixes to avoid dereference of uninitialized ops in dma_fence
     tracing and keep reference to execbuf object until submitted.
   - vGPU state setting locking fix (Zhenyu)
   - Fix vGPU display dmabuf as read-only (Zhenyu)
   - Properly handle vGPU display dmabuf page pin when rendering (Tina)
   - Fix one guest boot warning to handle guc reset state (Fred)"

* tag 'drm-fixes-2019-12-21' of git://anongit.freedesktop.org/drm/drm:
  drm/exynos: gsc: add missed component_del
  drm/i915: Fix pid leak with banned clients
  drm/i915/gem: Keep request alive while attaching fences
  drm/i915: Fix WARN_ON condition for cursor plane ddb allocation
  drm/i915/gvt: Fix guest boot warning
  drm/i915/tgl: Drop Wa#1178
  drm/i915/ehl: Define EHL powerwells independently of ICL
  drm/i915: Set fence_work.ops before dma_fence_init
  drm/i915: Copy across scheduler behaviour flags across submit fences
  drm/i915/dsb: Fix in mmio offset calculation of DSB instance
  drm/i915/gvt: Pin vgpu dma address before using
  drm/i915/gvt: set guest display buffer as readonly
  drm/i915/gvt: use vgpu lock for active state setting

Merge tag 'io_uring-5.5-20191220' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Here's a set of fixes that should go into 5.5-rc3 for io_uring.

  This is bigger than I'd like it to be, mainly because we're fixing the
  case where an application reuses sqe data right after issue. This
  really must work, or it's confusing. With 5.5 we're flagging us as
  submit stable for the actual data, this must also be the case for
  SQEs.

  Honestly, I'd really like to add another series on top of this, since
  it cleans it up considerable and prevents any SQE reuse by design. I
  posted that here:

    https://lore.kernel.org/io-uring/20191220174742.7449-1-axboe@kernel.dk/T/#u

  and may still send it your way early next week once it's been looked
  at and had some more soak time (does pass all regression tests). With
  that series, we've unified the prep+issue handling, and only the prep
  phase even has access to the SQE.

  Anyway, outside of that, fixes in here for a few other issues that
  have been hit in testing or production"

* tag 'io_uring-5.5-20191220' of git://git.kernel.dk/linux-block:
  io_uring: io_wq_submit_work() should not touch req->rw
  io_uring: don't wait when under-submitting
  io_uring: warn about unhandled opcode
  io_uring: read opcode and user_data from SQE exactly once
  io_uring: make IORING_OP_TIMEOUT_REMOVE deferrable
  io_uring: make IORING_OP_CANCEL_ASYNC deferrable
  io_uring: make IORING_POLL_ADD and IORING_POLL_REMOVE deferrable
  io_uring: make HARDLINK imply LINK
  io_uring: any deferred command must have stable sqe data
  io_uring: remove 'sqe' parameter to the OP helpers that take it
  io_uring: fix pre-prepped issue with force_nonblock == true
  io-wq: re-add io_wq_current_is_worker()
  io_uring: fix sporadic -EFAULT from IORING_OP_RECVMSG
  io_uring: fix stale comment and a few typos

Merge tag 'drm-intel-fixes-2019-12-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix to drop an unused and harmful display W/A
- Fix to define EHL power wells independent of ICL
- Fix for priority inversion on bonded requests
- Fix in mmio offset calculation of DSB instance
- Fix memory leak from get_task_pid when banning clients
- Fixes to avoid dereference of uninitialized ops in dma_fence tracing
and keep reference to execbuf object until submitted.

- Includes gvt-fixes-2019-12-18

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191219124635.GA16068@jlahtine-desk.ger.corp.intel.com

Merge tag 'exynos-drm-fixes-for-v5.5-rc3' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

Just one bug fixup
. Make sure to unregister a component for Exynos gscaler driver
when the driver is removed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1576714013-3788-1-git-send-email-inki.dae@samsung.com

parisc: Fix compiler warnings in debug_core.c

Fix this compiler warning:
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
arch/parisc/include/asm/cmpxchg.h:48:3: warning: value computed is not used [-Wunused-value]
   48 |  ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
arch/parisc/include/asm/atomic.h:78:30: note: in expansion of macro ‘xchg’
   78 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
      |                              ^~~~
kernel/debug/debug_core.c:596:4: note: in expansion of macro ‘atomic_xchg’
  596 |    atomic_xchg(&kgdb_active, cpu);
      |    ^~~~~~~~~~~

Signed-off-by: Helge Deller <deller@gmx.de>

block: fix memleak when __blk_rq_map_user_iov() is failed

When I doing fuzzy test, get the memleak report:

BUG: memory leak
unreferenced object 0xffff88837af80000 (size 4096):
  comm "memleak", pid 3557, jiffies 4294817681 (age 112.499s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    20 00 00 00 10 01 00 00 00 00 00 00 01 00 00 00   ...............
  backtrace:
    [<000000001c894df8>] bio_alloc_bioset+0x393/0x590
    [<000000008b139a3c>] bio_copy_user_iov+0x300/0xcd0
    [<00000000a998bd8c>] blk_rq_map_user_iov+0x2f1/0x5f0
    [<000000005ceb7f05>] blk_rq_map_user+0xf2/0x160
    [<000000006454da92>] sg_common_write.isra.21+0x1094/0x1870
    [<00000000064bb208>] sg_write.part.25+0x5d9/0x950
    [<000000004fc670f6>] sg_write+0x5f/0x8c
    [<00000000b0d05c7b>] __vfs_write+0x7c/0x100
    [<000000008e177714>] vfs_write+0x1c3/0x500
    [<0000000087d23f34>] ksys_write+0xf9/0x200
    [<000000002c8dbc9d>] do_syscall_64+0x9f/0x4f0
    [<00000000678d8e9a>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

If __blk_rq_map_user_iov() is failed in blk_rq_map_user_iov(),
the bio(s) which is allocated before this failing will leak. The
refcount of the bio(s) is init to 1 and increased to 2 by calling
bio_get(), but __blk_rq_unmap_user() only decrease it to 1, so
the bio cannot be freed. Fix it by calling blk_rq_unmap_user().

Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: fix typo in copyright statement

coypright -> copyright

Reported-by: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd: fix memleak in path handling error case

If for whatever reason the dasd_eckd_check_characteristics() function
exits after at least some paths have their configuration data
allocated those data is never freed again. In the error case the
device->private pointer is set to NULL and dasd_eckd_uncheck_device()
will exit without freeing the path data because of this NULL pointer.

Fix by calling dasd_eckd_clear_conf_data() for error cases.

Also use dasd_eckd_clear_conf_data() in dasd_eckd_uncheck_device()
to avoid code duplication.

Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly

The max data count (mdc) is an unsigned 16-bit integer value as per AR
documentation and is received via ccw_device_get_mdc() for a specific
path mask from the CIO layer. The function itself also always returns a
positive mdc value or 0 in case mdc isn't supported or couldn't be
determined.

Though, the comment for this function describes a negative return value
to indicate failures.

As a result, the DASD device driver interprets the return value of
ccw_device_get_mdc() incorrectly. The error case is essentially a dead
code path.

To fix this behaviour, check explicitly for a return value of 0 and
change the comment for ccw_device_get_mdc() accordingly.

This fix merely enables the error code path in the DASD functions
get_fcx_max_data() and verify_fcx_max_data(). The actual functionality
stays the same and is still correct.

Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Fix a lockdep complaint triggered by request queue flushing

Avoid that running test nvme/012 from the blktests suite triggers the
following false positive lockdep complaint:

============================================
WARNING: possible recursive locking detected
5.0.0-rc3-xfstests-00015-g1236f7d60242 #841 Not tainted
--------------------------------------------
ksoftirqd/1/16 is trying to acquire lock:
000000000282032e (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

but task is already holding lock:
00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&fq->mq_flush_lock)->rlock);
  lock(&(&fq->mq_flush_lock)->rlock);

*** DEADLOCK ***

May be due to missing lock nesting notation

1 lock held by ksoftirqd/1/16:
#0: 00000000cbadcbc2 (&(&fq->mq_flush_lock)->rlock){..-.}, at: flush_end_io+0x4e/0x1d0

stack backtrace:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.0.0-rc3-xfstests-00015-g1236f7d60242 #841
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
dump_stack+0x67/0x90
__lock_acquire.cold.45+0x2b4/0x313
lock_acquire+0x98/0x160
_raw_spin_lock_irqsave+0x3b/0x80
flush_end_io+0x4e/0x1d0
blk_mq_complete_request+0x76/0x110
nvmet_req_complete+0x15/0x110 [nvmet]
nvmet_bio_done+0x27/0x50 [nvmet]
blk_update_request+0xd7/0x2d0
blk_mq_end_request+0x1a/0x100
blk_flush_complete_seq+0xe5/0x350
flush_end_io+0x12f/0x1d0
blk_done_softirq+0x9f/0xd0
__do_softirq+0xca/0x440
run_ksoftirqd+0x24/0x50
smpboot_thread_fn+0x113/0x1e0
kthread+0x121/0x140
ret_from_fork+0x3a/0x50

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: Fix the type of 'sts' in bsg_queue_rq()

This patch fixes the following sparse warnings:

block/bsg-lib.c:269:19: warning: incorrect type in initializer (different base types)
block/bsg-lib.c:269:19:    expected int sts
block/bsg-lib.c:269:19:    got restricted blk_status_t [usertype]
block/bsg-lib.c:286:16: warning: incorrect type in return expression (different base types)
block/bsg-lib.c:286:16:    expected restricted blk_status_t
block/bsg-lib.c:286:16:    got int [assigned] sts

Cc: Martin Wilck <mwilck@suse.com>
Fixes: d46fe2cb2dce ("block: drop device references in bsg_queue_rq()")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

parisc: soft_offline_page() now takes the pfn

Switch page deallocation table (pdt) driver to use pfn instead of a page
pointer in soft_offline_page().

Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'iommu-fixes-v5.5-rc2' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Fix kmemleak warning in IOVA code

- Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask
   type mismatches

- Make ISA reserved regions relaxable, so that VFIO can assign devices
   which have such regions defined

- Fix mapping errors resulting in IO page-faults in the VT-d driver

- Make sure direct mappings for a domain are created after the default
   domain is updated

- Map ISA reserved regions in the VT-d driver with correct permissions

- Remove unneeded check for PSI capability in the IOTLB flush code of
   the VT-d driver

- Lockdep fix iommu_dma_prepare_msi()

* tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/dma: Relax locking in iommu_dma_prepare_msi()
  iommu/vt-d: Remove incorrect PSI capability check
  iommu/vt-d: Allocate reserved region for ISA with correct permission
  iommu: set group default domain before creating direct mappings
  iommu/vt-d: Fix dmar pte read access not set error
  iommu/vt-d: Set ISA bridge reserved region as relaxable
  iommu/dma: Rationalise types for DMA masks
  iommu/iova: Init the struct iova to fix the possible memleak

Merge tag 'platform-drivers-x86-v5.5-2' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver fixes from Andy Shevchenko:
"Bucket of fixes for PDx86. Note, that there is no ABI breakage in
  Mellanox driver because it has been introduced in v5.5-rc1, so we can
  change it.

  Summary:

   - Add support of APUv4 and fix an assignment of simswap GPIO

   - Add Siemens CONNECT X300 to DMI table to avoid stuck during boot

   - Correct arguments of WMI call on HP Envy x360 15-cp0xxx model

   - Fix the mlx-bootctl sysfs attributes to be device related"

* tag 'platform-drivers-x86-v5.5-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: pcengines-apuv2: Spelling fixes in the driver
  platform/x86: pcengines-apuv2: detect apuv4 board
  platform/x86: pcengines-apuv2: fix simswap GPIO assignment
  platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table
  platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes
  platform/mellanox: fix the mlx-bootctl sysfs

Merge tag 'mmc-v5.5-rc2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC host fixes from Ulf Hansson:

- mtk-sd: Fix tuning for MT8173 HS200/HS400 mode

- sdhci: Revert a fix for incorrect switch to HS mode

- sdhci-msm: Fixup accesses to the DDR_CONFIG register

- sdhci-of-esdhc: Revert a bad fix for erratum A-009204

- sdhci-of-esdhc: Re-implement fix for erratum A-009204

- sdhci-of-esdhc: Fixup P2020 errata handling

- sdhci-pci: Disable broken CMDQ on Intel GLK based Lenovo systems

* tag 'mmc-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround
  mmc: sdhci: Add a quirk for broken command queuing
  mmc: sdhci: Workaround broken command queuing on Intel GLK
  mmc: sdhci-of-esdhc: fix P2020 errata handling
  mmc: sdhci: Update the tuning failed messages to pr_debug level
  mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"
  mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
  mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
  Revert "mmc: sdhci: Fix incorrect switch to HS mode"

Merge tag 'char-misc-5.5-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char and other driver fixes for 5.5-rc3.

  The most noticable one is a much-reported fix for a random driver
  issue that came up from 5.5-rc1 compat_ioctl cleanups. The others are
  a chunk of habanalab driver fixes and intel_th driver fixes and new
  device ids.

  All have been in linux-next with no reported issues"

* tag 'char-misc-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  random: don't forget compat_ioctl on urandom
  intel_th: msu: Fix window switching without windows
  intel_th: Fix freeing IRQs
  intel_th: pci: Add Elkhart Lake SOC support
  intel_th: pci: Add Comet Lake PCH-V support
  habanalabs: remove variable 'val' set but not used
  habanalabs: rate limit error msg on waiting for CS

Merge tag 'staging-5.5-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for a number of reported
  issues.

  The majority here are some fixes for the wfx driver, but also in here
  is a comedi driver fix found during some code review, and an axis-fifo
  build dependancy issue to resolve some reported testing problems.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wfx: fix wrong error message
  staging: wfx: fix hif_set_mfp() with big endian hosts
  staging: wfx: detect race condition in WEP authentication
  staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1Mbps
  staging: wfx: fix rate control handling
  staging: wfx: firmware does not support more than 32 total retries
  staging: wfx: use boolean appropriately
  staging: wfx: fix counter overflow
  staging: wfx: fix case of lack of tx_retry_policies
  staging: wfx: fix the cache of rate policies on interface reset
  staging: axis-fifo: add unspecified HAS_IOMEM dependency
  staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value

arm64: cpu_errata: Add Hisilicon TSV110 to spectre-v2 safe list

HiSilicon Taishan v110 CPUs didn't implement CSV2 field of the
ID_AA64PFR0_EL1, but spectre-v2 is mitigated by hardware, so
whitelist the MIDR in the safe list.

Signed-off-by: Wei Li <liwei391@huawei.com>
[hanjun: re-write the commit log]
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'tty-5.5-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.5-rc3.

  Only four small patches here:

   - atmel serial driver fix

   - msm_serial driver fix

   - sprd serial driver fix

   - tty core port fix

  The last tty core fix should resolve a long-standing bug with a race
  at port creation time that some people would see, and Sudip finally
  tracked down.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty/serial: atmel: fix out of range clock divider handling
  tty: link tty and port before configuring it as console
  serial: sprd: Add clearing break interrupt operation
  tty: serial: msm_serial: Fix lockup for sysrq and oops

Merge tag 'usb-5.5-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported issues.

  Included in here are:

   - xhci build warning fix

   - ehci disconnect warning fix

   - usbip lockup fix and error cleanup fix

   - typec build fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci: Fix build warning seen with CONFIG_PM=n
  usbip: Fix error path of vhci_recv_ret_submit()
  usbip: Fix receive error in vhci-hcd when using scatter-gather
  USB: EHCI: Do not return -EPIPE when hub is disconnected
  usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'

Merge tag 'pinctrl-v5.5-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Sorry that this fixes pull request took a while. Too much christmas
  business going on.

  This contains a few really important Intel fixes and some odd fixes:

   - A host of fixes for the Intel baytrail and cherryview: properly
     serialize all register accesses and add the irqchip with the
     gpiochip as we need to, fix some pin lists and initialize the
     hardware in the right order.

   - Fix the Aspeed G6 LPC configuration.

   - Handle a possible NULL pointer exception in the core.

   - Fix the Kconfig dependencies for the Equilibrium driver"

* tag 'pinctrl-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT config
  pinctrl: Modify Kconfig to fix linker error
  pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio
  pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
  pinctrl: cherryview: Pass irqchip when adding gpiochip
  pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callback
  pinctrl: cherryview: Split out irq hw-init into a separate helper function
  pinctrl: baytrail: Pass irqchip when adding gpiochip
  pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Update North Community pin list
  pinctrl: baytrail: Really serialize all register accesses

platform/x86: pcengines-apuv2: Spelling fixes in the driver

Mainly does:
- capitalize gpio and bios to GPIO and BIOS
- capitalize beginning of comments
- add periods in multi-line comments

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: pcengines-apuv2: detect apuv4 board

GPIO stuff on APUv4 seems to be the same as on APUv2, so we just
need to match on DMI data.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: pcengines-apuv2: fix simswap GPIO assignment

The mapping entry has to hold the GPIO line index instead of
controller's register number.

Fixes: 5037d4ddda31 ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table

The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.

Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4932 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

platform/mellanox: fix the mlx-bootctl sysfs

This is a follow-up commit for the sysfs attributes to change
from DRIVER_ATTR to DEVICE_ATTR according to some initial comments.
In such case, it's better to point the sysfs path to the device
itself instead of the driver. The ABI document is also updated.

Fixes: 79e29cb8fbc5 ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

xfs: Make the symbol 'xfs_rtalloc_log_count' static

Fix the following sparse warning:

fs/xfs/libxfs/xfs_trans_resv.c:206:1: warning: symbol 'xfs_rtalloc_log_count' was not declared. Should it be static?

Fixes: b1de6fc7520f ("xfs: fix log reservation overflows when allocating large rt extents")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xen/grant-table: remove multiple BUG_ON on gnttab_interface

gnttab_request_version() always sets the gnttab_interface variable
and the assertions to check for empty gnttab_interface is unnecessary.
The patch eliminates multiple such assertions.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen-blkback: support dynamic unbind/bind

By simply re-attaching to shared rings during connect_ring() rather than
assuming they are freshly allocated (i.e assuming the counters are zero)
it is possible for vbd instances to be unbound and re-bound from and to
(respectively) a running guest.

This has been tested by running:

while true;
  do fio --name=randwrite --ioengine=libaio --iodepth=16 \
  --rw=randwrite --bs=4k --direct=1 --size=1G --verify=crc32;
  done

in a PV guest whilst running:

while true;
  do echo vbd-$DOMID-$VBD >unbind;
  echo unbound;
  sleep 5;
  echo vbd-$DOMID-$VBD >bind;
  echo bound;
  sleep 3;
  done

in dom0 from /sys/bus/xen-backend/drivers/vbd to continuously unbind and
re-bind its system disk image.

This is a highly useful feature for a backend module as it allows it to be
unloaded and re-loaded (i.e. updated) without requiring domUs to be halted.
This was also tested by running:

while true;
  do echo vbd-$DOMID-$VBD >unbind;
  echo unbound;
  sleep 5;
  rmmod xen-blkback;
  echo unloaded;
  sleep 1;
  modprobe xen-blkback;
  echo bound;
  cd $(pwd);
  sleep 3;
  done

in dom0 whilst running the same loop as above in the (single) PV guest.

Some (less stressful) testing has also been done using a Windows HVM guest
with the latest 9.0 PV drivers installed.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen/interface: re-define FRONT/BACK_RING_ATTACH()

Currently these macros are defined to re-initialize a front/back ring
(respectively) to values read from the shared ring in such a way that any
requests/responses that are added to the shared ring whilst the front/back
is detached will be skipped over. This, in general, is not a desirable
semantic since most frontend implementations will eventually block waiting
for a response which would either never appear or never be processed.

Since the macros are currently unused, take this opportunity to re-define
them to re-initialize a front/back ring using specified values. This also
allows FRONT/BACK_RING_INIT() to be re-defined in terms of
FRONT/BACK_RING_ATTACH() using a specified value of 0.

NOTE: BACK_RING_ATTACH() will be used directly in a subsequent patch.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xenbus: limit when state is forced to closed

If a driver probe() fails then leave the xenstore state alone. There is no
reason to modify it as the failure may be due to transient resource
allocation issues and hence a subsequent probe() may succeed.

If the driver supports re-binding then only force state to closed during
remove() only in the case when the toolstack may need to clean up. This can
be detected by checking whether the state in xenstore has been set to
closing prior to device removal.

NOTE: Re-bind support is indicated by new boolean in struct xenbus_driver,
which defaults to false. Subsequent patches will add support to
some backend drivers.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xenbus: move xenbus_dev_shutdown() into frontend code...

...and make it static

xenbus_dev_shutdown() is seemingly intended to cause clean shutdown of PV
frontends when a guest is rebooted. Indeed the function waits for a
conpletion which is only set by a call to xenbus_frontend_closed().

This patch removes the shutdown() method from backends and moves
xenbus_dev_shutdown() from xenbus_probe.c into xenbus_probe_frontend.c,
renaming it appropriately and making it static.

NOTE: In the case where the backend is running in a driver domain, the
      toolstack should have already terminated any frontends that may be
      using it (since Xen does not support re-startable PV driver domains)
      so xenbus_dev_shutdown() should never be called.

Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

xen/blkfront: Adjust indentation in xlvbd_alloc_gendisk

Clang warns:

../drivers/block/xen-blkfront.c:1117:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                nr_parts = PARTS_PER_DISK;
                ^
../drivers/block/xen-blkfront.c:1115:3: note: previous statement is here
                if (err)
                ^

This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.

While we are here, the previous line has some trailing whitespace; clean
that up as well.

Fixes: c80a420995e7 ("xen-blkfront: handle Xen major numbers other than XENVBD")
Link: https://github.com/ClangBuiltLinux/linux/issues/791
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

riscv: move sifive_l2_cache.c to drivers/soc

The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management. It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.

Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.

Fixes: a967a289f169 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: define vmemmap before pfn_to_page calls

pfn_to_page & page_to_pfn depend on vmemmap being available before the calls
if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused
by NOMMU changes which moved vmemmap definition bellow functions definitions
calling pfn_to_page & page_to_pfn.

Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV.

v2:
- Add a comment for vmemmap in source

Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 6bd33e1ece52 ("riscv: add nommu support")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: fix scratch register clearing in M-mode.

This patch fixes that the sscratch register clearing in M-mode. It cleared
sscratch register in M-mode, but it should clear mscratch register. That will
cause kernel trap if the CPU core doesn't support S-mode when trying to access
sscratch.

Fixes: 9e80635619b5 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

riscv: Fix use of undefined config option CONFIG_CONFIG_MMU

In Kconfig files, config options are written without the CONFIG_ prefix.

Fixes: 6bd33e1ece52 ("riscv: add nommu support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>

Merge branch 'cls_u32-fix-refcount-leak'

Davide Caratti says:

====================
net/sched: cls_u32: fix refcount leak

a refcount leak in the error path of u32_change() has been recently
introduced. It can be observed with the following commands:

  [root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 97 \
  > u32 match ip src 127.0.0.1/32 indev notexist20 flowid 1:1 action drop
  RTNETLINK answers: Invalid argument
  We have an error talking to the kernel
  [root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 98 \
  > handle 42:42 u32 divisor 256
  Error: cls_u32: Divisor can only be used on a hash table.
  We have an error talking to the kernel
  [root@f31 ~]# tc filter replace dev eth0 ingress protocol ip prio 99 \
  > u32 ht 47:47
  Error: cls_u32: Specified hash table not found.
  We have an error talking to the kernel

they all legitimately return -EINVAL; however, they leave semi-configured
filters at eth0 tc ingress:

[root@f31 ~]# tc filter show dev eth0 ingress
filter protocol ip pref 97 u32 chain 0
filter protocol ip pref 97 u32 chain 0 fh 800: ht divisor 1
filter protocol ip pref 98 u32 chain 0
filter protocol ip pref 98 u32 chain 0 fh 801: ht divisor 1
filter protocol ip pref 99 u32 chain 0
filter protocol ip pref 99 u32 chain 0 fh 802: ht divisor 1

With older kernels, filters were unconditionally considered empty (and
thus de-refcounted) on the error path of ->change().
After commit 8b64678e0af8 ("net: sched: refactor tp insert/delete for
concurrent execution"), filters were considered empty when the walk()
function didn't set 'walker.stop' to 1.
Finally, with commit 6676d5e416ee ("net: sched: set dedicated tcf_walker
flag when tp is empty"), tc filters are considered empty unless the walker
function is called with a non-NULL handle. This last change doesn't fit
cls_u32 design, because at least the "root hnode" is (almost) always
non-NULL, as it's allocated in u32_init().

- patch 1/2 is a proposal to restore the original kernel behavior, where
  no filter was installed in the error path of u32_change().
- patch 2/2 adds tdc selftests that can be ued to verify the correct
  behavior of u32 in the error path of ->change().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tc-testing: initial tdc selftests for cls_u32

- move test "e9a3 - Add u32 with source match" to u32.json, and change the
match pattern to catch all hnodes
- add testcases for relevant error paths of cls_u32 module

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: cls_u32: fix refcount leak in the error path of u32_change()

when users replace cls_u32 filters with new ones having wrong parameters,
so that u32_change() fails to validate them, the kernel doesn't roll-back
correctly, and leaves semi-configured rules.

Fix this in u32_walk(), avoiding a call to the walker function on filters
that don't have a match rule connected. The side effect is, these "empty"
filters are not even dumped when present; but that shouldn't be a problem
as long as we are restoring the original behaviour, where semi-configured
filters were not even added in the error path of u32_change().

Fixes: 6676d5e416ee ("net: sched: set dedicated tcf_walker flag when tp is empty")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: s3fwrn5: replace the assertion with a WARN_ON

In s3fwrn5_fw_recv_frame, if fw_info->rsp is not empty, the
current code causes a crash via BUG_ON. However, s3fwrn5_fw_send_msg
does not crash in such a scenario. The patch replaces the BUG_ON
by returning the error to the callers and frees up skb.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>