Imre Kaloz [Sun, 12 Apr 2015 20:48:13 +0000 (20:48 +0000)]
ppc40x: upgrade to 3.18
left "broken" as I'm not sure if my only board is to blame.. testers welcomed
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45406
Imre Kaloz [Sun, 12 Apr 2015 20:45:55 +0000 (20:45 +0000)]
orion: upgrade to 3.18 (compile tested only)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45405
Jo-Philipp Wich [Sun, 12 Apr 2015 20:34:31 +0000 (20:34 +0000)]
fstools: reject relative mount points
To prevent future confusion around '/overlay' vs. 'overlay' simply reject
relative path specifications as mount points since such paths result in
undefined behaviour anyway.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45404
Rafał Miłecki [Sun, 12 Apr 2015 20:11:25 +0000 (20:11 +0000)]
bcm53xx: try to handle Netgear R8000 VLANs config
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403
Rafał Miłecki [Sun, 12 Apr 2015 20:00:42 +0000 (20:00 +0000)]
b53: improve overriding CPU port state on BCM5301X
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45402
Imre Kaloz [Sun, 12 Apr 2015 17:30:41 +0000 (17:30 +0000)]
mvebu: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45401
Imre Kaloz [Sun, 12 Apr 2015 17:29:50 +0000 (17:29 +0000)]
mvebu: migrate mamba support to the upstreamed code
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45400
Felix Fietkau [Sun, 12 Apr 2015 17:22:04 +0000 (17:22 +0000)]
bcm53xx: fix bcma gpio chip base
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399
Felix Fietkau [Sun, 12 Apr 2015 16:39:24 +0000 (16:39 +0000)]
kernel: add missing memory barrier to bgmac
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45398
John Crispin [Sun, 12 Apr 2015 15:34:44 +0000 (15:34 +0000)]
modules: add missing imx6 depenedency to dwc2
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45397
Imre Kaloz [Sun, 12 Apr 2015 15:04:14 +0000 (15:04 +0000)]
mvebu: handle other SKUs as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45396
Imre Kaloz [Sun, 12 Apr 2015 15:03:25 +0000 (15:03 +0000)]
mvebu: include the ahci driver in the default profile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45395
Imre Kaloz [Sun, 12 Apr 2015 15:02:43 +0000 (15:02 +0000)]
modules: package the mvebu ahci driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45394
Imre Kaloz [Sun, 12 Apr 2015 14:46:19 +0000 (14:46 +0000)]
generic: make sure we only try to mangle bootargs we do have
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45393
Rafał Miłecki [Sun, 12 Apr 2015 12:04:13 +0000 (12:04 +0000)]
bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45392
Rafał Miłecki [Sun, 12 Apr 2015 11:46:16 +0000 (11:46 +0000)]
bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45391
Rafał Miłecki [Sun, 12 Apr 2015 11:46:11 +0000 (11:46 +0000)]
otrx: support for extracting partitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45390
Rafał Miłecki [Sun, 12 Apr 2015 10:42:27 +0000 (10:42 +0000)]
bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45389
Felix Fietkau [Sun, 12 Apr 2015 10:35:21 +0000 (10:35 +0000)]
kernel: add bgmac fixes for various issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45388
Rafał Miłecki [Sun, 12 Apr 2015 10:20:59 +0000 (10:20 +0000)]
bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45387
Imre Kaloz [Sun, 12 Apr 2015 08:35:33 +0000 (08:35 +0000)]
mvebu: reformat the damaged syscfg partition on the mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45386
Felix Fietkau [Sat, 11 Apr 2015 21:21:03 +0000 (21:21 +0000)]
kernel: revert section sorting change from r41951
It currently does not seem to make a difference anymore, except by
increasing compressed kernel image size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45385
Felix Fietkau [Sat, 11 Apr 2015 19:34:45 +0000 (19:34 +0000)]
busybox: enable BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3 by default, dnsmasq relies on it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45384
Felix Fietkau [Sat, 11 Apr 2015 12:23:36 +0000 (12:23 +0000)]
kernel: remove leftover @ (#19454)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45383
Felix Fietkau [Sat, 11 Apr 2015 12:22:39 +0000 (12:22 +0000)]
netfilter.mk: remove bogus NAT related kernel module entries (#19451)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45382
Felix Fietkau [Sat, 11 Apr 2015 12:22:28 +0000 (12:22 +0000)]
netfilter.mk: drop obsolete kernel version dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45381
Felix Fietkau [Sat, 11 Apr 2015 10:52:01 +0000 (10:52 +0000)]
netifd: fix ieee80211r 'sh: bad number' in mac80211 setup (bug #19345)
Two errors "netifd: radio0: sh: bad number" have recently surfaced in system
log in trunk when wifi interfaces come up. I tracked the errors to checking
numerical values of some config options without ensuring that the option has
any value.
The errors I see have apparently been introduced by r45051 (ieee80211r in
hostapd) and r45326 (start_disabled in mac80211). My patches fix two
instances of "bad number", but there may be a third one, as the original
report in bug 19345 pre-dates r45326 and already has two "bad number" errors
for radio0.
https://dev.openwrt.org/ticket/19345
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45380
Felix Fietkau [Sat, 11 Apr 2015 10:51:55 +0000 (10:51 +0000)]
netifd: fix start_disabled 'sh: bad number' in mac80211 setup (bug #19345)
Two errors "netifd: radio0: sh: bad number" have recently surfaced in system
log in trunk when wifi interfaces come up. I tracked the errors to checking
numerical values of some config options without ensuring that the option has
any value.
The errors I see have apparently been introduced by r45051 (ieee80211r in
hostapd) and r45326 (start_disabled in mac80211). My patches fix two
instances of "bad number", but there may be a third one, as the original
report in bug 19345 pre-dates r45326 and already has two "bad number" errors
for radio0.
https://dev.openwrt.org/ticket/19345
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45379
Luka Perkov [Sat, 11 Apr 2015 10:46:20 +0000 (10:46 +0000)]
imx6: add missing patches from 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45378
Felix Fietkau [Sat, 11 Apr 2015 10:43:46 +0000 (10:43 +0000)]
kernel: remove kernel module checks/dependencies for 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45377
Luka Perkov [Sat, 11 Apr 2015 10:28:20 +0000 (10:28 +0000)]
include: drop old kernel versions
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45376
Luka Perkov [Sat, 11 Apr 2015 10:28:14 +0000 (10:28 +0000)]
generic: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45375
Luka Perkov [Sat, 11 Apr 2015 10:28:11 +0000 (10:28 +0000)]
brcm47xx: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45374
Luka Perkov [Sat, 11 Apr 2015 10:28:06 +0000 (10:28 +0000)]
adm8668: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45373
Luka Perkov [Sat, 11 Apr 2015 10:28:03 +0000 (10:28 +0000)]
mcs814x: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45372
Luka Perkov [Sat, 11 Apr 2015 10:28:00 +0000 (10:28 +0000)]
imx6: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45371
Luka Perkov [Sat, 11 Apr 2015 10:27:49 +0000 (10:27 +0000)]
imx6: switch to 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45370
Zoltan Herpai [Fri, 10 Apr 2015 21:36:33 +0000 (21:36 +0000)]
mxs: reinstate rootfs image creation and dtb copy
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45369
Zoltan Herpai [Fri, 10 Apr 2015 21:34:21 +0000 (21:34 +0000)]
mxs: Include the right kernel image in the rootfs
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45368
John Crispin [Fri, 10 Apr 2015 20:39:44 +0000 (20:39 +0000)]
modules: fix postinst generation for kernel modules
Fixes ticket #19352.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45367
Felix Fietkau [Fri, 10 Apr 2015 20:02:55 +0000 (20:02 +0000)]
librpc: update to the latest version, fixes musl compatibility issues (#19445)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45366
John Crispin [Fri, 10 Apr 2015 14:42:11 +0000 (14:42 +0000)]
modules: more wpan fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45365
John Crispin [Fri, 10 Apr 2015 13:39:38 +0000 (13:39 +0000)]
modules: add missing wpan fakehard driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45364
John Crispin [Fri, 10 Apr 2015 13:39:33 +0000 (13:39 +0000)]
kernel: remove references to kmod-of-i2c
these break the IB since the module is part of i2c-core now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45363
Felix Fietkau [Fri, 10 Apr 2015 11:52:59 +0000 (11:52 +0000)]
kernel: add jffs2 RENAME_WHITEOUT support, fixes overlayfs renames (#19432)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45362
Felix Fietkau [Fri, 10 Apr 2015 11:52:54 +0000 (11:52 +0000)]
kernel: drop obsolete linux 3.10 related dependencies/checks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45361
Felix Fietkau [Fri, 10 Apr 2015 11:52:47 +0000 (11:52 +0000)]
kernel: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45360
Steven Barth [Fri, 10 Apr 2015 11:52:42 +0000 (11:52 +0000)]
odhcpd: send current hop-limit by default in RAs
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45359
Steven Barth [Fri, 10 Apr 2015 11:33:15 +0000 (11:33 +0000)]
odhcp6c: move IPv6 /proc config to userspace and sanitize
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45358
Jonas Gorski [Fri, 10 Apr 2015 10:30:00 +0000 (10:30 +0000)]
kernel: fix kmod-ieee802154_6lowpan config symbol
Fixes build failure caught by buildbot:
IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support (IEEE802154) [M/n/y/?] m
6lowpan support over IEEE 802.15.4 (IEEE802154_6LOWPAN) [N/m/?] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
make[6]: *** [silentoldconfig] Error 1
make[5]: *** [silentoldconfig] Error 2
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45357
Jonas Gorski [Fri, 10 Apr 2015 10:29:04 +0000 (10:29 +0000)]
b53: clean up code to match kernel style better
* properly enclose macro arguments in paranthesis on use
* remove trailing white space
* convert C99 // comments
* add missing blank lines after declaration
* remove braces from single statement blocks
* split lines > 80 chars (except for one)
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45356
Jonas Gorski [Fri, 10 Apr 2015 10:28:46 +0000 (10:28 +0000)]
b53: define registers available and needed on BCM5301X
They are also present on some BCM63xx switches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45355
Steven Barth [Fri, 10 Apr 2015 10:19:17 +0000 (10:19 +0000)]
dnsmasq: bump to 2.73rc4
Fix crash caused by malformed DNS requests
Improved DNSSEC handling
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45354
Rafał Miłecki [Fri, 10 Apr 2015 09:58:00 +0000 (09:58 +0000)]
bcm53xx: build image for ASUS RT-AC56U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45353
Rafał Miłecki [Fri, 10 Apr 2015 09:42:48 +0000 (09:42 +0000)]
bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45352
John Crispin [Fri, 10 Apr 2015 08:31:26 +0000 (08:31 +0000)]
hostapd: remove unused asprintf parameter
r45270 removed ieee80211n=%d from the format string but didn't remove
the parameter itself. Though this probably doesn't cause any harm, it's
quite confusing and unneeded.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45351
John Crispin [Fri, 10 Apr 2015 08:31:06 +0000 (08:31 +0000)]
iptables: revert r40916
it causes problems with newer iptables when ipv6 is disabled as iptc uncoditionally links ip6tc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45350
John Crispin [Fri, 10 Apr 2015 08:30:11 +0000 (08:30 +0000)]
wpan-tools: adds wpan-tools utility
This patch adds the wpan-tools (iwpan) utility to OpenWRT
build system. This utility required to manage IEE-802.15.4
devices.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45349
John Crispin [Fri, 10 Apr 2015 08:29:35 +0000 (08:29 +0000)]
kernel: adds wpan related packages
This patch adds the IEEE-802.15.4 and 6LoWPAN related
packages.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45348
John Crispin [Fri, 10 Apr 2015 08:29:26 +0000 (08:29 +0000)]
sunxi: don't enable ARMTHUMB XZ BCJ filter in kernel
Having CONFIG_XZ_DEC_ARMTHUMB enabled breaks squashfs when ARM BCJ
filter was used to create the filesystem (and that's what we do on
all ARM targets). Thus unset CONFIG_XZ_DEC_ARMTHUMB to fix
squashfs on sunxi.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45347
John Crispin [Fri, 10 Apr 2015 08:29:05 +0000 (08:29 +0000)]
qca-nss-gmac: update to latest version
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45346
John Crispin [Fri, 10 Apr 2015 08:28:44 +0000 (08:28 +0000)]
ipq806x: automatically select kmod-usb-phy-qcom-dwc3
kmod-usb-phy-qcom-dwc3 is required to get USB working on ipq806x. It was
missed in previous commit so let's enable it automatically.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45345
John Crispin [Fri, 10 Apr 2015 08:28:21 +0000 (08:28 +0000)]
procd: fix compile error on x86_64
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45344
John Crispin [Fri, 10 Apr 2015 08:27:55 +0000 (08:27 +0000)]
openssl: disable arm optimisation until we know why it fails on some socs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45343
John Crispin [Fri, 10 Apr 2015 08:27:44 +0000 (08:27 +0000)]
ralink: fix cevt-r4k hack
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45342
John Crispin [Fri, 10 Apr 2015 08:27:27 +0000 (08:27 +0000)]
fstools: update to latest git HEAD
this fixes extroot on mvebu
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45341
Felix Fietkau [Thu, 9 Apr 2015 14:57:25 +0000 (14:57 +0000)]
uci: update to the latest version, fixes a regression in handling empty/comment lines in uci batch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45340
John Crispin [Thu, 9 Apr 2015 14:33:11 +0000 (14:33 +0000)]
procd: add helper for starting NAND sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45339
John Crispin [Thu, 9 Apr 2015 14:33:03 +0000 (14:33 +0000)]
base-files: add support for platform_pre_upgrade function
Current NAND sysupgrade process is a bit hard to follow due to the way
of triggering stage1. Currently this is done by leaving a /mark/ in the
form of /tmp/sysupgrade-nand-path during nand_do_platform_check.
Existence of this mark stops standard sysupgrade process (as the result
of sysupgrade_pre_upgrade exit). This may be a bit misleading.
Proposed solution adds a new function that will allow platform.sh
trigger NAND sysupgrade consciously. This will also allow cleaning
nand_do_platform_check limiting it to just checking the image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45338
John Crispin [Thu, 9 Apr 2015 10:33:26 +0000 (10:33 +0000)]
modules: remove zd1201 package
it needs to be moved to compat-wireless
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45337
John Crispin [Thu, 9 Apr 2015 10:33:16 +0000 (10:33 +0000)]
kernel: add rtl8723au driver (staging)
- move config symbol to separate package (Why was it there in the first place?)
- 8723au might be used in some USB sticks or on some sunxi boards
compile tested only
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45336
John Crispin [Thu, 9 Apr 2015 10:33:11 +0000 (10:33 +0000)]
generic/3.18: add missing wireless symbols
triggered by enabling RFKILL in global build options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45335
John Crispin [Thu, 9 Apr 2015 10:33:05 +0000 (10:33 +0000)]
netifd: Interface last error support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45334
John Crispin [Thu, 9 Apr 2015 10:32:54 +0000 (10:32 +0000)]
ppp: Detailed last error support
Enables last error support for the PPP protocol handlers.
In generic teardown the PPP daemon exit code is translated into
a self explaining error string which is set as interface error
by proto_notify_error in case of failure.
Signed-off-by: Johan Peeters <johan.peeters111@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 45333
John Crispin [Thu, 9 Apr 2015 10:32:46 +0000 (10:32 +0000)]
dnsmasq: Add option '--servers-file'
The option '--servers-file' is available since dnsmasq v2.69.
Signed-off-by: Lars Kruse <lists@sumpfralle.de>
SVN-Revision: 45332
John Crispin [Thu, 9 Apr 2015 10:32:37 +0000 (10:32 +0000)]
ramips: Add support for Microduino MicroWRT
MicroWRT is an wireless router with 2 USB,1 ethernet port. It
has a 16M flash and 64M DDR2 RAM. You can use most interface, such as
i2c, SPI, i2s and PCIe. Besides that there are three expansion borad to
combine with the core board. The detailed information, please refer to
https://www.microduino.cc/wiki/index.php?title=Main_Page
This patch adds support for it.
Because there is only one port,so disabled VLAN and use eth0 as lan
port. and only a power LED control by power pin.
Signed-off-by: 盛凯 <shengkai81@gmail.com>
SVN-Revision: 45331
John Crispin [Thu, 9 Apr 2015 10:32:26 +0000 (10:32 +0000)]
docs: Fix typo buysbox -> busybox.
Signed-off-by: Catalin Patulea <catalinp@google.com>
SVN-Revision: 45330
John Crispin [Thu, 9 Apr 2015 10:32:18 +0000 (10:32 +0000)]
ubox: add log_trailer_null option to uci
this allow us to use syslog tcp with \0 trailer
instead of \n trailer (logread -0 option)
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 45329
John Crispin [Thu, 9 Apr 2015 10:32:08 +0000 (10:32 +0000)]
ar71xx: enable LEDs on Hornet-UB X2
None of the LEDs are enabled by default on the Hornet-UB X2 board
(the 16/64MB version of the Hornet-UB), because it uses a different
board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards
are equivalent WRT their LEDs.
SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com>
SVN-Revision: 45328
John Crispin [Thu, 9 Apr 2015 10:32:01 +0000 (10:32 +0000)]
umbim: update to latest git HEAD
merge patches from Bjørn Mork
http://patchwork.ozlabs.org/patch/459277/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45327
John Crispin [Thu, 9 Apr 2015 10:31:56 +0000 (10:31 +0000)]
mac80211: add start_disabled option
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45326
John Crispin [Thu, 9 Apr 2015 10:31:45 +0000 (10:31 +0000)]
hostapd: add update_beacon to ubus binding
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45325
Zoltan Herpai [Thu, 9 Apr 2015 10:28:59 +0000 (10:28 +0000)]
generic: add a few missing symbols for 4.0
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45324
Steven Barth [Thu, 9 Apr 2015 08:17:32 +0000 (08:17 +0000)]
odhcp6c: add 464xlat integration, fix dslite integration
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45323
Steven Barth [Thu, 9 Apr 2015 08:17:23 +0000 (08:17 +0000)]
ds-lite: add support for fqdn peeraddrs
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45322
Felix Fietkau [Thu, 9 Apr 2015 08:02:33 +0000 (08:02 +0000)]
busybox: fix regression in handling non-existant find path arguments (#19439)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45321
Rafał Miłecki [Thu, 9 Apr 2015 06:33:56 +0000 (06:33 +0000)]
bcm53xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45320
Rafał Miłecki [Thu, 9 Apr 2015 05:40:37 +0000 (05:40 +0000)]
brcm47xx: image: use "-" separator for device version
This makes legacy subtarget follow two other.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45319
Rafał Miłecki [Thu, 9 Apr 2015 05:36:16 +0000 (05:36 +0000)]
brcm47xx: verify also standard TRX images during sysupgrade
It allows detecting data corruption for plain TRX as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45318
Rafał Miłecki [Thu, 9 Apr 2015 05:22:10 +0000 (05:22 +0000)]
brcm47xx: fix WRT300N devices magics for sysupgrade check
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45317
Rafał Miłecki [Thu, 9 Apr 2015 05:22:04 +0000 (05:22 +0000)]
brcm47xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45316
Rafał Miłecki [Thu, 9 Apr 2015 05:21:55 +0000 (05:21 +0000)]
otrx: new package with tiny app verifying TRX images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45315
Gabor Juhos [Wed, 8 Apr 2015 16:21:04 +0000 (16:21 +0000)]
kernel: remove ATHEROS_AR{231X,71XX} config symbols from the patches
Those don't exist anymore.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45314
Rafał Miłecki [Wed, 8 Apr 2015 09:50:57 +0000 (09:50 +0000)]
brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45313
Felix Fietkau [Wed, 8 Apr 2015 09:26:10 +0000 (09:26 +0000)]
image.mk: rework FILESYSTEM evaluation order to fix some build issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45312
Rafał Miłecki [Wed, 8 Apr 2015 09:22:02 +0000 (09:22 +0000)]
bcm53xx: replace few BCM5301X patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45311
Rafał Miłecki [Wed, 8 Apr 2015 05:55:32 +0000 (05:55 +0000)]
brcm47xx: update legacy subtarget description
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45310
Rafał Miłecki [Wed, 8 Apr 2015 05:55:28 +0000 (05:55 +0000)]
mac80211: make b43 N-PHY default for brcm47xx legacy subtarget
Subtarget legacy is supposed to support all ssb SoC except for BCM4705.
There are few BCM4703 devices with 802.11n supprt (WRT160N v1.0, v1.1).
Few BCM4704 devices with 802.11n: ASUS WL-500W, Linksys WRT150N v1.0 &
v1.1, Linksys WRT300N v1.0, Netgear WNDR3300 v1, WNR834B v1 & v2.
It seems we have to enable N-PHY for legacy as well to support above.
Unfortunately it increases root.squashfs size by 48 460 B.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45309
Rafał Miłecki [Wed, 8 Apr 2015 05:09:42 +0000 (05:09 +0000)]
brcm47xx: add fix "Data bus error" on CardBus ssb SoCs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45308
Rafał Miłecki [Wed, 8 Apr 2015 04:46:27 +0000 (04:46 +0000)]
brcm47xx: reverse 2 LEDs polarity on WRT320N v1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45307
projects / openwrt / openwrt.git / log