Jonas Gorski [Sat, 4 Jul 2015 12:52:57 +0000 (12:52 +0000)]
kernel: kmod-scsi-core: fix load on install
sd_mod depends on scsi_mod, but due to it being an AutoLoad and not
AutoProbe module, it was not loading when installing the package,
causing unknown symbol errors for sd_mod and anything depending on it.
Closes #14927, #18293, #19351.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46176
Hauke Mehrtens [Sat, 4 Jul 2015 08:54:20 +0000 (08:54 +0000)]
scons: change md5sum to new release
The developers of scons found a bug in the packaging of their release
and just replaced the already released version with a new one without
changing the version number. This breaks the download script because it
also has a new md5sum.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46175
Florian Fainelli [Sat, 4 Jul 2015 01:25:15 +0000 (01:25 +0000)]
at91: add Device Tree based board detection
Set up eth0 as LAN interface by default.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46174
Florian Fainelli [Sat, 4 Jul 2015 01:24:48 +0000 (01:24 +0000)]
at91: sama5d3: enable USB2 by default
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46173
Florian Fainelli [Sat, 4 Jul 2015 01:24:37 +0000 (01:24 +0000)]
kernel: fix OHCI and EHCI modules for AT91
We were not copying the additional files needed to get USB to work on
the AT91 platforms, make sure we do this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46172
Florian Fainelli [Sat, 4 Jul 2015 01:24:27 +0000 (01:24 +0000)]
at91: enable Micrel PHY driver
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46171
Hauke Mehrtens [Fri, 3 Jul 2015 23:27:21 +0000 (23:27 +0000)]
kernel: b53: fix build with brcm47xx
The position of the nvram header file on brcm47xx changed with kernel
version 4.1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46170
Hauke Mehrtens [Fri, 3 Jul 2015 23:21:01 +0000 (23:21 +0000)]
curl: update curl to version 7.43.0
This brings curl to version 7.43.0 and contains fixes for the following
security vulnerabilities:
CVE-2015-3236: lingering HTTP credentials in connection re-use
http://curl.haxx.se/docs/adv_20150617A.html
CVE-2015-3237: SMB send off unrelated memory contents
http://curl.haxx.se/docs/adv_20150617B.html
The 100-check_long_long patch is not needed any more, because the
upstream autoconf script already checks for long long when cyassl is
selected.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46169
Hauke Mehrtens [Fri, 3 Jul 2015 23:20:36 +0000 (23:20 +0000)]
cyassl: update to wolfssl 3.6.0
Upstream wolfssl already has better checks to detect broken ssl v2
ClientHellos, we can remove our hack.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46168
Hauke Mehrtens [Fri, 3 Jul 2015 23:20:01 +0000 (23:20 +0000)]
cyassl: version bump to 3.4.6
This patch introduces a new build error into coova-chilli, but
coova-chilli already fails to build even without it anyway. CyaSSL is
now called wolfSSL, and all the API's have been renamed, and
backward-compatibility headers added.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46167
Hauke Mehrtens [Fri, 3 Jul 2015 23:18:33 +0000 (23:18 +0000)]
brcm47xx: add support for kernel 4.1
This adds support for kernel 4.1 and removes kernel 4.0.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46166
Jonas Gorski [Fri, 3 Jul 2015 16:47:44 +0000 (16:47 +0000)]
ar71xx: make 902-unaligned_access_hacks.patch apply again
r46161 updated headers also touched by it, so it needed to be refreshed
as well.
Closes #20033.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46165
Jo-Philipp Wich [Fri, 3 Jul 2015 13:33:05 +0000 (13:33 +0000)]
uclibc++: make g++-uc* wrappers relocatable
The g++-uc wrapper hardcodes $(STAGING_DIR) and $(TOOLCHAIN_DIR) paths which
will not work outside of the original build environment.
Replace the hardcoded staging_dir occurences with paths relative to the
$STAGING_DIR environment variable to make the g++-uc* wrappers usable in an
SDK environment.
Fixes the libdb47 build failure reported at
https://lists.openwrt.org/pipermail/openwrt-devel/2015-April/032455.html
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46162
Jonas Gorski [Fri, 3 Jul 2015 11:48:45 +0000 (11:48 +0000)]
kernel: improve uapi headers coexistence with musl
Make some network uapi headers detect if they are included after
not only glibc but also musl headers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46161
Steven Barth [Thu, 2 Jul 2015 14:11:15 +0000 (14:11 +0000)]
nf-conntrack: enable netlink events
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46160
Felix Fietkau [Thu, 2 Jul 2015 11:45:08 +0000 (11:45 +0000)]
ath9k: make DMA stop related messages debug-only (#11862, #9654)
A long time ago, ath9k had issues during reset where the DMA engine
would stay active and could potentially corrupt memory.
To debug those issues, the driver would print warnings whenever they
occur.
Nowadays, these issues are gone and the primary cause of these messages
is if the MAC is stuck during reset or busy processing a long
transmission. This is fairly harmless, yet these messages continue to
worry users.
To reduce the number of bogus bug reports, turn these messages into
debug messages and count their occurence in the "reset" debugfs file.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46158
Felix Fietkau [Thu, 2 Jul 2015 11:26:12 +0000 (11:26 +0000)]
mdns: fix ubus wait_for command
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46156
Jonas Gorski [Tue, 30 Jun 2015 23:26:17 +0000 (23:26 +0000)]
kernel: update 4.1 to 4.1.1
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.1
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46152
Jonas Gorski [Tue, 30 Jun 2015 23:26:13 +0000 (23:26 +0000)]
kernel: update 4.0 to 4.0.7
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.6
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.7
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46151
Jonas Gorski [Tue, 30 Jun 2015 23:26:09 +0000 (23:26 +0000)]
kernel: update 3.18 to 3.18.17
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46150
Jonas Gorski [Tue, 30 Jun 2015 23:26:05 +0000 (23:26 +0000)]
brcm63xx: swap a4001n power leds again
This partially reverts r44577 ("brcm63xx: fix DTS LEDs and buttons").
Fixes #19858.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46149
Jonas Gorski [Tue, 30 Jun 2015 23:26:02 +0000 (23:26 +0000)]
brcm63xx: unbreak board_probe_switch again
Also move it to an earlier place so new boards added are less likely
to confuse quilt.
Fixes #19965.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46148
Hauke Mehrtens [Mon, 29 Jun 2015 22:20:05 +0000 (22:20 +0000)]
kernel: add some missing config options for 4.1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46147
Steven Barth [Mon, 29 Jun 2015 16:44:27 +0000 (16:44 +0000)]
hardening: disable user-space SSP for !musl
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46146
Steven Barth [Mon, 29 Jun 2015 14:12:38 +0000 (14:12 +0000)]
libubox: fix MD5 for musl on big-endian platforms
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46145
Rafał Miłecki [Mon, 29 Jun 2015 06:59:45 +0000 (06:59 +0000)]
bcm53xx: port last 2 UART patches to 4.1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46141
Rafał Miłecki [Mon, 29 Jun 2015 06:48:41 +0000 (06:48 +0000)]
bcm53xx: rework patch enabling UART support
Follow upstream patch and handle it using &uart0. Also disable &uart1 as
it's most likely unused. This will allow us to get valuable reports and
upstream these changes.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46140
Rafał Miłecki [Mon, 29 Jun 2015 06:48:08 +0000 (06:48 +0000)]
bcm53xx: use UART serial DT patch sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46139
Steven Barth [Mon, 29 Jun 2015 06:47:49 +0000 (06:47 +0000)]
toolchain: only use fortify-headers for musl
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46138
Steven Barth [Mon, 29 Jun 2015 06:47:42 +0000 (06:47 +0000)]
toolchain: binutils: enhance build reproducability
built toolchain utilities will always operate in deterministic mode:
https://sourceware.org/binutils/docs-2.25/binutils/ar-cmdline.html
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46137
Steven Barth [Mon, 29 Jun 2015 06:47:31 +0000 (06:47 +0000)]
elfutils: bump to 0.163
Bugfix only release.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
SVN-Revision: 46136
Steven Barth [Mon, 29 Jun 2015 06:47:19 +0000 (06:47 +0000)]
netifd: add mtu6 option to override IPv6 MTU
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46135
Felix Fietkau [Sat, 27 Jun 2015 23:25:46 +0000 (23:25 +0000)]
musl: update to latest git to fix MIPS and PowerPC TLS issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46134
Nicolas Thill [Fri, 26 Jun 2015 00:43:03 +0000 (00:43 +0000)]
mac80211: fix build on UML
A duplicate include guard prevents inclusion of barrier.h in UML build and this prevents mac80211 from building.
This patch re-enables mac80211 hwsim and renames the include guard.
See https://lists.openwrt.org/pipermail/openwrt-devel/2015-June/033614.html for details.
Signed-off-by: Martin Tippmann <martin.tippmann@gmail.com>
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 46133
Hauke Mehrtens [Thu, 25 Jun 2015 22:02:10 +0000 (22:02 +0000)]
tools: scons: update to version 2.3.5
This brings scons to the most recent version.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46132
Hauke Mehrtens [Thu, 25 Jun 2015 22:00:36 +0000 (22:00 +0000)]
bcm53xx: add upstream nand driver
This adds the upstream Broadcom nand driver and makes use of it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46131
Hauke Mehrtens [Thu, 25 Jun 2015 21:56:34 +0000 (21:56 +0000)]
bcm53xx: add upstream PCIe driver
This patch adds the missing parts to use the upstream Broadcom PCIe
driver and makes use of it.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46130
Hauke Mehrtens [Thu, 25 Jun 2015 21:43:16 +0000 (21:43 +0000)]
bcm53xx: add arm l2c overwrite options like in mainline kernel
Instead of setting the l2c_aux_val variable in the board code make it
possible to set these through device tree and make use of that.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46129
Hauke Mehrtens [Thu, 25 Jun 2015 21:33:53 +0000 (21:33 +0000)]
bcm53xx: add support for kernel 4.1
This only removes the patches already applied upstream and makes the
rest apply cleanly.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46128
Jo-Philipp Wich [Thu, 25 Jun 2015 12:13:57 +0000 (12:13 +0000)]
libiconv-full: fix build with fortify source
Avoid redefining `realpath` to fix the following error:
.../include/fortify/stdlib.h:36:13: error: 'realpath' undeclared here (not in a function)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46127
Jo-Philipp Wich [Thu, 25 Jun 2015 11:20:39 +0000 (11:20 +0000)]
grub2: disable stack-protector
- enabling "-fstack-protector" results in build errors
- Upstream explicitly tests & disables it
v2:
- use override
reference: upstream commit
baa2a121e004a95a12e2bb7f2419de6625a30c2d
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46126
Jo-Philipp Wich [Thu, 25 Jun 2015 11:19:23 +0000 (11:19 +0000)]
grub2: fix build against musl
Invert the `__GLIBC__` guards into `!__UCLIBC__` ones to avoid
invalid references to `_llseek` on musl.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46125
Jo-Philipp Wich [Thu, 25 Jun 2015 11:05:50 +0000 (11:05 +0000)]
strace: update to 4.10
- include upstream fixes for musl compatibility
Include <sys/stat.h> for S_I* macros
d34e00b293942b1012ddc49ed3ab379a32337611
Include <linux/ioctl.h> for _IOC_* macros
3460dc486d333231998de0f19918204aacee9ae3
strace 4.8 is broken with musl on some arch
(arm: omap,oxnas according to buildbot)
compile tested only
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46124
Matteo Croce [Thu, 25 Jun 2015 10:14:22 +0000 (10:14 +0000)]
fix mklibs with musl
crate a relative symlink to libc.so because
make wildcard function ignores broken symlinks
SVN-Revision: 46123
Steven Barth [Wed, 24 Jun 2015 18:52:13 +0000 (18:52 +0000)]
fortify-headers: fix compatibility with -pedantic
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46122
Steven Barth [Wed, 24 Jun 2015 18:52:10 +0000 (18:52 +0000)]
Revert "px5g-standalone: compatibility with fortify-headers"
This reverts commit
0c912eec6d95805d30133f34165a1c4e7cbb4bec.
SVN-Revision: 46121
Steven Barth [Wed, 24 Jun 2015 10:57:20 +0000 (10:57 +0000)]
scripts/feeds: observe -p flag for preferential feeds
lookup_target was trampling the $feed variable, resulting in the -p flag
no longer preferentially installing from the named feed.
Make sure to use a local variable for this instead.
Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 46120
Steven Barth [Wed, 24 Jun 2015 10:57:14 +0000 (10:57 +0000)]
hardening: make override variables more intuitive
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46119
Steven Barth [Tue, 23 Jun 2015 19:57:50 +0000 (19:57 +0000)]
px5g-standalone: compatibility with fortify-headers
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46118
Steven Barth [Tue, 23 Jun 2015 14:38:03 +0000 (14:38 +0000)]
toolchain: add fortify-headers, enable FORTIFY_SOURCE by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46117
Jonas Gorski [Tue, 23 Jun 2015 10:43:19 +0000 (10:43 +0000)]
uclibc: fix _HAS_SSP replacement regex
A dot was dropped, making it match too much.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46116
Luka Perkov [Tue, 23 Jun 2015 05:21:50 +0000 (05:21 +0000)]
ar71xx: add support for tp-link wr740n v5.0 (EU)
TP-Link ships wr740n v5.0 to Romania (so probably everywhere except
China) with 4 MB flash and 32 MB memory (confirmed by their local
support). This patch adds support for the v5.0 clone of v4, i just
tested it on my own v5.0 router and it works.
Signed-off-by: Daniel Petre <daniel.petre@posteo.net>
SVN-Revision: 46115
Luka Perkov [Tue, 23 Jun 2015 05:21:45 +0000 (05:21 +0000)]
ccache: upgrade to version 3.1.11
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 46114
Jonas Gorski [Mon, 22 Jun 2015 12:28:46 +0000 (12:28 +0000)]
brcm63xx: add kernel 4.1 support
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46113
Jonas Gorski [Mon, 22 Jun 2015 12:27:59 +0000 (12:27 +0000)]
generic: add linux 4.1 support
Boot tested: http://pastebin.com/L6aAb9xj
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo:
update to 4.1 final
add patches added since submission
delete patches applied in later rcs
restore commit messages in 220-gc-sections and 304-mips_disable_fpu
fix 050-backport_netfilter_rtcache to match new API
update inlined dma ops with upstream changes
add missing config symbols
enabled CONFIG_MULTIUSER
update kmod defintions for 4.1
]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46112
Jonas Gorski [Mon, 22 Jun 2015 12:27:38 +0000 (12:27 +0000)]
xtables-addons: disable for kernel 4.1 for now
Netfilter APIs have changed, so the code requuires updates to compile
successfully.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46111
Jonas Gorski [Mon, 22 Jun 2015 12:27:30 +0000 (12:27 +0000)]
mac80211: disable for kernel 4.1 for now
Backports requires updates to compile successfully.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46110
Jonas Gorski [Mon, 22 Jun 2015 12:27:25 +0000 (12:27 +0000)]
netfilter.mk: fix redirect module locations for 3.19+
ntf_redir_ipvX is part of NAT support, so they should be in the
appropriate nft-nat kmods. Since they depend on nf_nat_redirect,
nf_nat_redirect should be part of nf-nat, not ipt-nat.
Fixes nft-core gaining a missing dependency on nf_nat_redirect.ko.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46109
Steven Barth [Mon, 22 Jun 2015 10:31:07 +0000 (10:31 +0000)]
gcc/musl: rework SSP-support
Make musl provide libssp_nonshared.a and make GCC link it unconditionally
if musl is used. This should be a no-op if SSP is disabled and seems to be
the only reliable way of dealing with SSP over all packages due to the mess
that is linkerflags handling in packages.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46108
Rafał Miłecki [Mon, 22 Jun 2015 07:51:00 +0000 (07:51 +0000)]
otrx: add extra compilation check before using __BYTE_ORDER
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46106
Rafał Miłecki [Mon, 22 Jun 2015 06:45:56 +0000 (06:45 +0000)]
otrx: include endian.h to make __BYTE_ORDER work with musl
Without this the condition
if __BYTE_ORDER == __BIG_ENDIAN
was always true.
Thanks Szabolcs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46105
Rafał Miłecki [Sun, 21 Jun 2015 21:06:09 +0000 (21:06 +0000)]
b53: Allow using all 8 ports on BCM53011
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46104
Felix Fietkau [Sun, 21 Jun 2015 17:52:12 +0000 (17:52 +0000)]
ath9k: fix ar956x device detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46090
Felix Fietkau [Sun, 21 Jun 2015 17:52:00 +0000 (17:52 +0000)]
toolchain: mark gcc 4.9 as broken, it miscompiles some code especially on ARM
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46089
Rafał Miłecki [Sun, 21 Jun 2015 16:47:05 +0000 (16:47 +0000)]
bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46088
Rafał Miłecki [Sun, 21 Jun 2015 16:26:23 +0000 (16:26 +0000)]
bcm53xx: enable USB power on Buffalo WZR-1750DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46087
Rafał Miłecki [Sun, 21 Jun 2015 14:26:03 +0000 (14:26 +0000)]
bcm53xx: update SPROM driver to include just-sent patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46086
Rafał Miłecki [Sun, 21 Jun 2015 14:02:13 +0000 (14:02 +0000)]
ramips: refresh patch with USB_MT7621_XHCI_PLATFORM
Fixes: edea6dfde4dc ("kernel: make USB_XHCI_PLATFORM selectable")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46085
Rafał Miłecki [Sun, 21 Jun 2015 12:07:33 +0000 (12:07 +0000)]
mac80211: backport some brcmfmac patches
There are two important patches in this patchset: updating read pointer
quicker & rework of .get_station().
There are few more upstream patches that are p2p-related and weren't
backported in this commit.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46084
Rafał Miłecki [Sun, 21 Jun 2015 11:09:49 +0000 (11:09 +0000)]
bcm53xx: enable USB power on Netgear R6250
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46083
Rafał Miłecki [Sun, 21 Jun 2015 11:09:30 +0000 (11:09 +0000)]
bcm53xx: update xHCI patch
This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46082
Rafał Miłecki [Sun, 21 Jun 2015 10:18:52 +0000 (10:18 +0000)]
bcm53xx: fix enabling GPIO-controlled USB power
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46081
Rafał Miłecki [Sun, 21 Jun 2015 10:18:43 +0000 (10:18 +0000)]
bcm53xx: add xHCI support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46080
Rafał Miłecki [Sun, 21 Jun 2015 10:18:24 +0000 (10:18 +0000)]
kernel: make USB_XHCI_PLATFORM selectable
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46079
Rafał Miłecki [Sat, 20 Jun 2015 21:12:01 +0000 (21:12 +0000)]
otrx: optimize memory usage by function checking TRX CRC
Allocating huge buffer for the whole TRX wasn't too optimal.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46078
Rafał Miłecki [Sat, 20 Jun 2015 21:11:56 +0000 (21:11 +0000)]
otrx: make crc32 table global for further optimizations
So far we got only one generic function accessing this table, but
implementing optimizations will require calculating crc32 in other code
parts as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46077
Steven Barth [Sat, 20 Jun 2015 18:36:52 +0000 (18:36 +0000)]
uclibc++: link against libssp_nonshared instead of libssp
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46076
Steven Barth [Sat, 20 Jun 2015 18:36:50 +0000 (18:36 +0000)]
musl: update musl to 2015-06-20
Fixes a mips-regression and a missing SSP function
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46075
Steven Barth [Sat, 20 Jun 2015 17:37:28 +0000 (17:37 +0000)]
libpcap: fixup libtool
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46074
Steven Barth [Sat, 20 Jun 2015 17:37:25 +0000 (17:37 +0000)]
musl: apply hardening options (e.g. SSP) also to libc itself
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46073
Steven Barth [Sat, 20 Jun 2015 17:37:22 +0000 (17:37 +0000)]
package-defaults: remove libssp for musl (redundant)
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46072
Steven Barth [Sat, 20 Jun 2015 17:37:20 +0000 (17:37 +0000)]
gcc: musl comes with its own SSP, so use it instead of libssp
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46071
Steven Barth [Sat, 20 Jun 2015 17:37:18 +0000 (17:37 +0000)]
buildroot: move hardening options into separate file
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46070
Felix Fietkau [Fri, 19 Jun 2015 17:48:11 +0000 (17:48 +0000)]
musl: read the timezone from /etc/TZ
Currently the OpenWRT boot scripts write the timezone configuration to
/tmp/TZ, relying on the behaviour of uClibc that the timezone is read
from /etc/TZ if no TZ env variable is found.
This works because /etc/TZ is a symlink to /tmp/TZ.
Musl libc however only reads the timezone from the TZ env variable and
if it doesn't find it or it's empty, it will look for a zoneinfo
file, that doesn't exist.
So in musl builds no timezone is ever set.
This patch fixes the issue by having musl libc behave like uClibc: if no
TZ env variable is found it will try to load it from /etc/TZ.
Signed-off-by: Gianluca Anzolin <gianluca at sottospazio.it>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46069
Steven Barth [Fri, 19 Jun 2015 17:07:11 +0000 (17:07 +0000)]
ppp: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46068
Steven Barth [Fri, 19 Jun 2015 14:36:37 +0000 (14:36 +0000)]
uclibc++: only disable SSP for ppc
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46067
Steven Barth [Fri, 19 Jun 2015 14:09:02 +0000 (14:09 +0000)]
uclibc++: honor ldflags, disable SSP
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46066
Steven Barth [Fri, 19 Jun 2015 13:45:48 +0000 (13:45 +0000)]
libtool: enable passthrough for SSP options
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46065
Steven Barth [Fri, 19 Jun 2015 13:30:18 +0000 (13:30 +0000)]
iproute2: honor LDFLAGS
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46064
Jonas Gorski [Fri, 19 Jun 2015 11:12:43 +0000 (11:12 +0000)]
kernel: update 4.0 to 4.0.5
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46063
Imre Kaloz [Fri, 19 Jun 2015 08:35:11 +0000 (08:35 +0000)]
mwlwifi: upgrade to 10.3.0.3
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46061
John Crispin [Thu, 18 Jun 2015 18:21:52 +0000 (18:21 +0000)]
ralink: add support for mt7621 switch counters
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>
SVN-Revision: 46050
John Crispin [Thu, 18 Jun 2015 18:21:46 +0000 (18:21 +0000)]
ar71xx: add profile and build image for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46049
John Crispin [Thu, 18 Jun 2015 18:21:41 +0000 (18:21 +0000)]
ar71xx: add user-space support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46048
John Crispin [Thu, 18 Jun 2015 18:21:33 +0000 (18:21 +0000)]
ar71xx: add kernel support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46047
John Crispin [Thu, 18 Jun 2015 18:21:23 +0000 (18:21 +0000)]
ar71xx: add support for TL-WR720N-v4.
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46046
John Crispin [Thu, 18 Jun 2015 18:21:15 +0000 (18:21 +0000)]
ar71xx: add support for compex wpj531
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 46045
John Crispin [Thu, 18 Jun 2015 18:21:05 +0000 (18:21 +0000)]
ar71xx: Add Support for the Bitmain Antminer S1
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>
SVN-Revision: 46044
John Crispin [Thu, 18 Jun 2015 18:20:56 +0000 (18:20 +0000)]
ramips: Add Support for the Linksys RE6500
This patch adds support for the Linksys RE6500 Range Extender
http://wiki.openwrt.org/toh/linksys/re6500
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46043
John Crispin [Thu, 18 Jun 2015 18:20:46 +0000 (18:20 +0000)]
ramips: Add support for the D-Link DCS-930 B1
http://wiki.openwrt.org/toh/d-link/dcs-930l
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46042
projects / openwrt / staging / chunkeey.git / log