Catalin Marinas [Tue, 14 Feb 2012 15:33:27 +0000 (16:33 +0100)]
ARM: 7323/1: Do not allow ARM_LPAE on pre-ARMv7 architectures
This patch expands the Kconfig dependencies for ARM_LPAE to not allow
enabling when architectures other than ARMv7 are built into the kernel.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Tue, 14 Feb 2012 23:26:42 +0000 (15:26 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/broonie/regulator
One small bug fix from Axel plus a fix for a build failure in unrealistic
but commonly built configs which for some reason manage to survive for
an awfully long time in -next without any reports.
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix getting voltage in max8649_enable_time()
regulator: Fix mc13xxx regulator modular build (again)
Linus Torvalds [Tue, 14 Feb 2012 23:21:25 +0000 (15:21 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Quoth BenH:
"Here are a few powerpc fixes for 3.3, all pretty trivial. I also
added the patch to define GET_IP/SET_IP so we can use some more
asm-generic goodness."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pseries/eeh: Fix crash when error happens during device probe
powerpc/pseries: Fix partition migration hang in stop_topology_update
powerpc/powernv: Disable interrupts while taking phb->lock
powerpc: Fix WARN_ON in decrementer_check_overflow
powerpc/wsp: Fix IRQ affinity setting
powerpc: Implement GET_IP/SET_IP
powerpc/wsp: Permanently enable PCI class code workaround
Linus Torvalds [Tue, 14 Feb 2012 23:20:50 +0000 (15:20 -0800)]
Merge tag 'mmc-fixes-for-3.3-rc4' of git://git./linux/kernel/git/cjb/mmc
MMC fixes for 3.3-rc4:
* The most visible fix here is against a regression introduced in 3.3-rc1
that ran cards in Ultra High Speed mode even when they failed to initialize
in that mode, leading to lower-speed cards failing to mount.
* A lockdep warning introduced in 3.3-rc1 is fixed.
* Various other small driver fixes, most notably for a NULL dereference
when using highmem with dw_mmc.
* tag 'mmc-fixes-for-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: dw_mmc: Fix PIO mode with support of highmem
mmc: atmel-mci: save and restore sdioirq when soft reset is performed
mmc: block: Init ro_lock sysfs attr to fix lockdep warnings
mmc: sh_mmcif: fix late delayed work initialisation
mmc: tmio_mmc: fix card eject during IO with DMA
mmc: core: Fix comparison issue in mmc_compare_ext_csds
mmc: core: Fix PowerOff Notify suspend/resume
mmc: sdhci-pci: set Medfield SDIO as non-removable
mmc: core: add the capability for broken voltage
mmc: core: Fix low speed mmc card detection failure
mmc: esdhc: set the timeout to the max value
mmc: esdhc: add PIO mode support
mmc: core: Ensure clocks are always enabled before host interaction
mmc: of_mmc_spi: fix little endian support
mmc: core: UHS sdio card that fails should not exceed 50MHz
mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
Linus Torvalds [Tue, 14 Feb 2012 23:20:11 +0000 (15:20 -0800)]
Merge tag 'stable/for-linus-fixes-3.3-rc3' of git://git./linux/kernel/git/konrad/xen
Two fixes for VCPU offlining; One to fix the string format exposed
by the xen-pci[front|back] to conform to the one used in majority of
PCI drivers; Two fixes to make the code more resilient to invalid
configurations.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* tag 'stable/for-linus-fixes-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xenbus_dev: add missing error check to watch handling
xen/pci[front|back]: Use %d instead of %1x for displaying PCI devfn.
xen pvhvm: do not remap pirqs onto evtchns if !xen_have_vector_callback
xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic.
xen/bootup: During bootup suppress XENBUS: Unable to read cpu state
Linus Torvalds [Tue, 14 Feb 2012 17:09:24 +0000 (09:09 -0800)]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound
sound fixes for 3.3-rc4
Basically all small fixes suited as rc4: a few HD-audio regression fixes,
a stable fix for an old Dell laptop with intel8x0, and a simple fix for
ASoC fsi.
* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: intel8x0: Fix default inaudible sound on Gateway M520
ALSA: hda - Fix silent speaker output on Acer Aspire 6935
ALSA: hda - Fix initialization of secondary capture source on VT1705
ASoC: fsi: fixup fsi_pointer() calculation method
ALSA: hda - Fix mute-LED VREF value for new HP laptops
Daniel T Chen [Tue, 14 Feb 2012 04:44:22 +0000 (23:44 -0500)]
ALSA: intel8x0: Fix default inaudible sound on Gateway M520
BugLink: https://bugs.launchpad.net/bugs/930842
The reporter states that audio is inaudible by default without muting
'External Amplifier'. Add a quirk to handle his SSID so that changing
the control is not necessary.
Reported-and-tested-by: Benjamin Carlson <elderbubba0810@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 14 Feb 2012 08:24:58 +0000 (09:24 +0100)]
Merge tag 'asoc-3.3' of git://git./linux/kernel/git/broonie/sound into for-linus
A simple fix from Morimoto-san for the pointer() operation in the FSI
driver.
Linus Torvalds [Tue, 14 Feb 2012 04:34:44 +0000 (20:34 -0800)]
Merge git://git.samba.org/sfrench/cifs-2.6
* git://git.samba.org/sfrench/cifs-2.6:
cifs: don't return error from standard_receive3 after marking response malformed
cifs: request oplock when doing open on lookup
cifs: fix error handling when cifscreds key payload is an error
Linus Torvalds [Tue, 14 Feb 2012 04:33:45 +0000 (20:33 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
This updates the sha512 fix so that it doesn't cause excessive stack
usage on i386. This is done by reverting to the original code, and
avoiding the W duplication by moving its initialisation into the loop.
As the underlying code is in fact the one that we have used for years,
I'm pushing this now instead of postponing to the next cycle.
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha512 - Avoid stack bloat on i386
crypto: sha512 - Use binary and instead of modulus
Thadeu Lima de Souza Cascardo [Wed, 11 Jan 2012 09:09:58 +0000 (09:09 +0000)]
powerpc/pseries/eeh: Fix crash when error happens during device probe
EEH may happen during a PCI driver probe. If the driver is trying to
access some register in a loop, the EEH code will try to print the
driver name. But the driver pointer in struct pci_dev is not set until
probe returns successfully.
Use a function to test if the device and the driver pointer is NULL
before accessing the driver's name.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Brian King [Wed, 11 Jan 2012 06:56:04 +0000 (06:56 +0000)]
powerpc/pseries: Fix partition migration hang in stop_topology_update
This fixes a hang that was observed during live partition migration.
Since stop_topology_update must not be called from an interrupt
context, call it earlier in the migration process. The hang observed
can be seen below:
WARNING: at kernel/timer.c:1011
Modules linked in: ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_broadcast nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop ibmveth sg ext3 jbd mbcache raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid10 raid1 raid0 scsi_dh_alua scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc dm_round_robin dm_multipath scsi_dh sd_mod crc_t10dif ibmvfc scsi_transport_fc scsi_tgt scsi_mod dm_snapshot dm_mod
NIP:
c0000000000c52d8 LR:
c00000000004be28 CTR:
0000000000000000
REGS:
c00000005ffd77d0 TRAP: 0700 Not tainted (
3.2.0-git-00001-g07d106d)
MSR:
8000000000021032 <ME,CE,IR,DR> CR:
48000084 XER:
00000001
CFAR:
c00000000004be20
TASK =
c00000005ec78860[0] 'swapper/3' THREAD:
c00000005ec98000 CPU: 3
GPR00:
0000000000000001 c00000005ffd7a50 c000000000fbbc98 c000000000ec8340
GPR04:
00000000282a0020 0000000000000000 0000000000004000 0000000000000101
GPR08:
0000000000000012 c00000005ffd4000 0000000000000020 c000000000f3ba88
GPR12:
0000000000000000 c000000007f40900 0000000000000001 0000000000000004
GPR16:
0000000000000001 0000000000000000 0000000000000000 c000000001022310
GPR20:
0000000000000001 0000000000000000 0000000000200200 c000000001029e14
GPR24:
0000000000000000 0000000000000001 0000000000000040 c00000003f74bc80
GPR28:
c00000003f74bc84 c000000000f38038 c000000000f16b58 c000000000ec8340
NIP [
c0000000000c52d8] .del_timer_sync+0x28/0x60
LR [
c00000000004be28] .stop_topology_update+0x20/0x38
Call Trace:
[
c00000005ffd7a50] [
c00000005ec78860] 0xc00000005ec78860 (unreliable)
[
c00000005ffd7ad0] [
c00000000004be28] .stop_topology_update+0x20/0x38
[
c00000005ffd7b40] [
c000000000028378] .__rtas_suspend_last_cpu+0x58/0x260
[
c00000005ffd7bf0] [
c0000000000fa230] .generic_smp_call_function_interrupt+0x160/0x358
[
c00000005ffd7cf0] [
c000000000036ec8] .smp_ipi_demux+0x88/0x100
[
c00000005ffd7d80] [
c00000000005c154] .icp_hv_ipi_action+0x5c/0x80
[
c00000005ffd7e00] [
c00000000012a088] .handle_irq_event_percpu+0x100/0x318
[
c00000005ffd7f00] [
c00000000012e774] .handle_percpu_irq+0x84/0xd0
[
c00000005ffd7f90] [
c000000000022ba8] .call_handle_irq+0x1c/0x2c
[
c00000005ec9ba20] [
c00000000001157c] .do_IRQ+0x22c/0x2a8
[
c00000005ec9bae0] [
c0000000000054bc] hardware_interrupt_entry+0x18/0x1c
Exception: 501 at .cpu_idle+0x194/0x2f8
LR = .cpu_idle+0x194/0x2f8
[
c00000005ec9bdd0] [
c000000000017e58] .cpu_idle+0x188/0x2f8 (unreliable)
[
c00000005ec9be90] [
c00000000067ec18] .start_secondary+0x3e4/0x524
[
c00000005ec9bf90] [
c0000000000093e8] .start_secondary_prolog+0x10/0x14
Instruction dump:
ebe1fff8 4e800020 fbe1fff8 7c0802a6 f8010010 7c7f1b78 f821ff81 78290464
80090014 5400019e 7c0000d0 78000fe0 <
0b000000>
4800000c 7c210b78 7c421378
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Michael Ellerman [Sun, 12 Feb 2012 14:28:20 +0000 (14:28 +0000)]
powerpc/powernv: Disable interrupts while taking phb->lock
We need to disable interrupts when taking the phb->lock. Otherwise
we could deadlock with pci_lock taken from an interrupt.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 8 Feb 2012 19:34:13 +0000 (19:34 +0000)]
powerpc: Fix WARN_ON in decrementer_check_overflow
We use __get_cpu_var() which triggers a false positive warning
in smp_processor_id() thinking interrupts are enabled (at this
point, they are soft-enabled but hard-disabled).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 8 Feb 2012 18:11:01 +0000 (18:11 +0000)]
powerpc/wsp: Fix IRQ affinity setting
We call the cache_hwirq_map() function with a linux IRQ number
but it expects a HW irq number. This triggers a BUG on multic-chip
setups in addition to not doing the right thing.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Srikar Dronamraju [Wed, 8 Feb 2012 04:53:13 +0000 (04:53 +0000)]
powerpc: Implement GET_IP/SET_IP
With this change, helpers such as instruction_pointer() et al, get defined
in the generic header in terms of GET_IP
Removed the unnecessary definition of profile_pc in !CONFIG_SMP case as
suggested by Mike Frysinger.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Sun, 5 Feb 2012 13:50:04 +0000 (13:50 +0000)]
powerpc/wsp: Permanently enable PCI class code workaround
It appears that on the Chroma card, the class code of the root
complex is still wrong even on DD2 or later chips. This could
be a firmware issue, but that breaks resource allocation so let's
unconditionally fix it up.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Seungwon Jeon [Thu, 9 Feb 2012 05:32:43 +0000 (14:32 +0900)]
mmc: dw_mmc: Fix PIO mode with support of highmem
Current PIO mode makes a kernel crash with CONFIG_HIGHMEM.
Highmem pages have a NULL from sg_virt(sg).
This patch fixes the following problem.
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: Oops: 817 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 Not tainted (
3.0.15-01423-gdbf465f #589)
PC is at dw_mci_pull_data32+0x4c/0x9c
LR is at dw_mci_read_data_pio+0x54/0x1f0
pc : [<
c0358824>] lr : [<
c035988c>] psr:
20000193
sp :
c0619d48 ip :
c0619d70 fp :
c0619d6c
r10:
00000000 r9 :
00000002 r8 :
00001000
r7 :
00000200 r6 :
00000000 r5 :
e1dd3100 r4 :
00000000
r3 :
65622023 r2 :
0000007f r1 :
eeb96000 r0 :
e1dd3100
Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment
xkernel
Control:
10c5387d Table:
61e2004a DAC:
00000015
Process swapper (pid: 0, stack limit = 0xc06182f0)
Stack: (0xc0619d48 to 0xc061a000)
9d40:
e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200
9d60:
c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100
9d80:
00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8
9da0:
c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154
9dc0:
e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900
9de0:
c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08
9e00:
c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c
9e20:
c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000
9e40:
c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68
9e60:
c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68
9e80:
c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8
9ea0:
c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff
9ec0:
c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4
9ee0:
c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44
9f00:
386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4
9f20:
386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48
9f40:
c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc
9f60:
c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8
9f80:
00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714
9fa0:
c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000
9fc0:
00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a
9fe0:
413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000
Backtrace:
[<
c03587d8>] (dw_mci_pull_data32+0x0/0x9c) from [<
c035988c>] (dw_mci_read_data_pio+0x54/0x1f0)
r6:
00000200 r5:
e1a4f000 r4:
e1dd3100
[<
c0359838>] (dw_mci_read_data_pio+0x0/0x1f0) from [<
c0359b24>] (dw_mci_interrupt+0xfc/0x4a4)
[<
c0359a28>] (dw_mci_interrupt+0x0/0x4a4) from [<
c00c4738>] (handle_irq_event_percpu+0x7c/0x1b4)
[<
c00c46bc>] (handle_irq_event_percpu+0x0/0x1b4) from [<
c00c48b4>] (handle_irq_event+0x44/0x64)
[<
c00c4870>] (handle_irq_event+0x0/0x64) from [<
c00c7358>] (handle_fasteoi_irq+0xb4/0x124)
r7:
ffffed68 r6:
c061e7cc r5:
c00423ac r4:
c061e780
[<
c00c72a4>] (handle_fasteoi_irq+0x0/0x124) from [<
c00c4258>] (generic_handle_irq+0x30/0x38)
r7:
ffffed68 r6:
c0618000 r5:
ffffee38 r4:
0000008d
[<
c00c4228>] (generic_handle_irq+0x0/0x38) from [<
c004241c>] (asm_do_IRQ+0x64/0xe0)
r5:
ffffee38 r4:
c00423ac
[<
c00423b8>] (asm_do_IRQ+0x0/0xe0) from [<
c0048bc0>] (__irq_svc+0x80/0x14c)
Exception stack(0xc0619ed0 to 0xc0619f18)
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Ludovic Desroches [Thu, 9 Feb 2012 10:55:29 +0000 (11:55 +0100)]
mmc: atmel-mci: save and restore sdioirq when soft reset is performed
Sometimes a software reset is needed. Then some registers are saved and
restored but the interrupt mask register is missing. It causes issues
with sdio devices whose interrupts are masked after reset.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Rabin Vincent [Wed, 1 Feb 2012 15:31:56 +0000 (16:31 +0100)]
mmc: block: Init ro_lock sysfs attr to fix lockdep warnings
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Guennadi Liakhovetski [Fri, 20 Jan 2012 23:41:28 +0000 (00:41 +0100)]
mmc: sh_mmcif: fix late delayed work initialisation
If the driver is loaded with a card in the slot, mmc_add_host() will
schedule an immediate card-detection work, which will start IO and wait
for command completion. Usually the kernel first returns to the sh_mmcif
probe function, lets it finish and only then schedules the rescan work.
But sometimes, expecially under heavy system load, the work will be
scheduled immediately before returning to the probe method. In this case
it is important for the driver to be fully prepared for IO. For sh_mmcif
this means, that also the timeout work has to be initialised before
calling mmc_add_host(). It is also better to prepare interrupts
beforehand. Besides, since mmc_add_host() does card-detection itself,
there is no need to do it again immediately afterwards.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Guennadi Liakhovetski [Fri, 6 Jan 2012 12:06:51 +0000 (13:06 +0100)]
mmc: tmio_mmc: fix card eject during IO with DMA
When DMA is in use and the card is ejected during IO, DMA transfers have to
be terminated, otherwise the dmaengine driver fails to operate properly,
when the card is re-inserted.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Jurgen Heeks [Wed, 1 Feb 2012 12:30:55 +0000 (13:30 +0100)]
mmc: core: Fix comparison issue in mmc_compare_ext_csds
Found this issue during code review. Actually, there are two issues which
both compensate together in lucky case. In unlucky case the bus width
probing might not work as expected.
Signed-off-by: Jurgen Heeks <jurgen.heeks@nokia.com>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Girish K S [Tue, 31 Jan 2012 10:14:03 +0000 (15:44 +0530)]
mmc: core: Fix PowerOff Notify suspend/resume
Modified the mmc_poweroff to resume before sending the poweroff
notification command. In sleep mode only AWAKE and RESET commands are
allowed, so before sending the poweroff notification command resume from
sleep mode and then send the notification command.
PowerOff Notify is tested on a Synopsis Designware Host Controller
(eMMC 4.5). The suspend to RAM and resume works fine.
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Tested-by: Girish K S <girish.shivananjappa@linaro.org>
Reviewed-by: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Adrian Hunter [Mon, 30 Jan 2012 12:27:18 +0000 (14:27 +0200)]
mmc: sdhci-pci: set Medfield SDIO as non-removable
Set Medfield SDIO as non-removable to avoid un-necessary
card detect activity.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Jaehoon Chung [Mon, 16 Jan 2012 08:49:01 +0000 (17:49 +0900)]
mmc: core: add the capability for broken voltage
There is an understood mismatch between the voltage the host controller is
set to and the voltage supplied to the card by a fixed voltage regulator.
Teaching the driver to accept the mismatch is overly complicated. Instead
just accept the regulator's voltage.
This patch adds MMC_CAP2_BROKEN_VOLTAGE.
If the voltage didn't satisfy between min_uV and max_uV, try to change
the voltage in core.c. When changing the voltage, maybe use
regulator_set_voltage().
In regulator_set_voltage(), check the below condition.
/* sanity check */
if (!rdev->desc->ops->set_voltage &&
!rdev->desc->ops->set_voltage_sel) {
ret = -EINVAL;
goto out;
}
If some board should use the fixed-regulator, always return -EINVAL.
Then, eMMC didn't initialize always.
So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Girish K S [Thu, 19 Jan 2012 03:26:19 +0000 (08:56 +0530)]
mmc: core: Fix low speed mmc card detection failure
This patch fixes the failure of low speed mmc card detection.
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Jerry Huang [Mon, 16 Jan 2012 06:13:04 +0000 (14:13 +0800)]
mmc: esdhc: set the timeout to the max value
When accessing the card on some FSL platform boards (e.g p2020, p1010,
mpc8536), the following error is reported with the timeout value calculated:
mmc0: Got data interrupt 0x00000020 even though no data operation was
in progress.
mmc0: Got data interrupt 0x00000020 even though no data operation was
in progress.
So we skip the calculation of timeout and use the max value to fix it.
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Gao Guanhua <B22826@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Jerry Huang [Mon, 16 Jan 2012 06:13:03 +0000 (14:13 +0800)]
mmc: esdhc: add PIO mode support
For some FSL ESDHC controllers (e.g. P2020E, Rev1.0), the SDHC can not
work on DMA mode because of the hardware bug, so we set a broken dma flag
and use PIO mode.
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Gao Guanhua <B22826@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Sujit Reddy Thumma [Sat, 4 Feb 2012 21:14:50 +0000 (16:14 -0500)]
mmc: core: Ensure clocks are always enabled before host interaction
Ensure clocks are always enabled before any interaction with the
host controller driver. This makes sure that there is no race
between host execution and the core layer turning off clocks
in different context with clock gating framework.
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 30 Jan 2012 04:15:29 +0000 (05:15 +0100)]
mmc: of_mmc_spi: fix little endian support
The voltage_ranges is supposed to switch from big endian to little endian.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Chris Ball <cjb@laptop.org>
Philip Rakity [Thu, 26 Jan 2012 14:57:10 +0000 (06:57 -0800)]
mmc: core: UHS sdio card that fails should not exceed 50MHz
A UHS sdio card that fails initialization at 1.8v signaling is not in
UHS mode. We cannot use the speed in the the cis to reflect the bus
speed as this is the maxiumum value and will not reflect the fact
that the host is operating at a lower (non uhs) bus speed.
Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Reviewed-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Linus Torvalds [Tue, 14 Feb 2012 00:59:53 +0000 (16:59 -0800)]
Merge tag 'for-linus' of git://github.com/rustyrussell/linux
* tag 'for-linus' of git://github.com/rustyrussell/linux:
module: fix broken isapnp handling in file2alias
module: make module param bint handle nul value
Ondrej Zary [Fri, 10 Feb 2012 19:12:27 +0000 (20:12 +0100)]
module: fix broken isapnp handling in file2alias
Handling of isapnp module aliases was broken by commit
626596e295d477c0fefa08cd5daa7dd011b1bb2c by changing "isapnp" string to "isa".
The code was then modified by commit
e49ce14150c64b29a8dd211df785576fa19a9858 but this bug remained.
Change the string back to "isapnp".
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Dave Young [Wed, 1 Feb 2012 02:33:11 +0000 (10:33 +0800)]
module: make module param bint handle nul value
Allow bint param accept nul values, just do same as bool param.
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Linus Torvalds [Mon, 13 Feb 2012 22:20:43 +0000 (14:20 -0800)]
Merge tag 'battery-fixes-for-v3.3-rc2' of git://git.infradead.org/users/cbou/battery-urgent
Just a few small fixes for a bunch of drivers. Nothing noteworthy.
* tag 'battery-fixes-for-v3.3-rc2' of git://git.infradead.org/users/cbou/battery-urgent:
lp8727_charger: Add terminating entry for i2c_device_id table
power_supply: Fix modalias for charger-manager
lp8727_chager: Fix permissions on a header file
bq27x00_battery: Fix flag register read
Revert "bq27x00_battery: Fix reporting status value for bq27500 battery"
Linus Torvalds [Mon, 13 Feb 2012 22:19:45 +0000 (14:19 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Two bugfixes in XFS for 3.3: one fix passes KMEM_SLEEP to kmem_realloc
instead of 0, and the other resolves a possible deadlock in xfs quotas.
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: use a normal shrinker for the dquot freelist
xfs: pass KM_SLEEP flag to kmem_realloc() in xlog_recover_add_to_cnt_trans()
Linus Torvalds [Mon, 13 Feb 2012 22:16:07 +0000 (14:16 -0800)]
Merge branch 'omap-fixes-warnings' of git://git.linaro.org/people/rmk/linux-arm
This set of changes are fixing various section mismatch warnings which
look to be completely valid. Primerily, those which are fixed are those
which can cause oopses by manipulation of driver binding via sysfs. For
example: calling code marked __init from driver probe __devinit
functions.
Some of these changes will be reworked at the next merge window when the
underlying reasons are sorted out. In the mean time, I think it's
important to have this fixed for correctness.
Also included in this set are fixes to various error messages in OMAP -
including making them gramatically correct, fixing a few spelling
errors, and more importantly, making them greppable by unwrapping them.
Tony Lindgren has acked all these patches, put them out for testing a
week ago, and I've tested them on the platforms I have.
* 'omap-fixes-warnings' of git://git.linaro.org/people/rmk/linux-arm:
ARM: omap: resolve nebulous 'Error setting wl12xx data'
ARM: omap: fix wrapped error messages in omap_hwmod.c
ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c
ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()
ARM: omap: fix section mismatch error for omap_4430sdp_display_init()
ARM: omap: fix section mismatch warning for omap_secondary_startup()
ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init()
ARM: omap: fix section mismatch warning in mux.c
ARM: omap: fix section mismatch errors in TWL PMIC driver
ARM: omap: fix uninformative vc/i2c configuration error message
ARM: omap: fix vc.c PMIC error message
ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error
Linus Torvalds [Mon, 13 Feb 2012 22:15:22 +0000 (14:15 -0800)]
Merge branch 'omap-fixes-urgent' of git://git.linaro.org/people/rmk/linux-arm
This pull request covers the major oopsing issues with OMAP, caused by
the lack of the TWL driver. Even when the TWL driver is not built in,
we shouldn't oops.
* 'omap-fixes-urgent' of git://git.linaro.org/people/rmk/linux-arm:
ARM: omap: fix broken twl-core dependencies and ifdefs
ARM: omap: fix oops in drivers/video/omap2/dss/dpi.c
ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found
Linus Torvalds [Mon, 13 Feb 2012 22:14:19 +0000 (14:14 -0800)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7322/1: Print BUG instead of undefined instruction on BUG_ON()
ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR
ARM: 7320/1: Fix proc_info table alignment
Linus Torvalds [Mon, 13 Feb 2012 21:56:14 +0000 (13:56 -0800)]
i387: make irq_fpu_usable() tests more robust
Some code - especially the crypto layer - wants to use the x86
FP/MMX/AVX register set in what may be interrupt (typically softirq)
context.
That *can* be ok, but the tests for when it was ok were somewhat
suspect. We cannot touch the thread-specific status bits either, so
we'd better check that we're not going to try to save FP state or
anything like that.
Now, it may be that the TS bit is always cleared *before* we set the
USEDFPU bit (and only set when we had already cleared the USEDFP
before), so the TS bit test may actually have been sufficient, but it
certainly was not obviously so.
So this explicitly verifies that we will not touch the TS_USEDFPU bit,
and adds a few related sanity-checks. Because it seems that somehow
AES-NI is corrupting user FP state. The cause is not clear, and this
patch doesn't fix it, but while debugging it I really wanted the code to
be more obviously correct and robust.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 13 Feb 2012 21:47:25 +0000 (13:47 -0800)]
i387: math_state_restore() isn't called from asm
It was marked asmlinkage for some really old and stale legacy reasons.
Fix that and the equally stale comment.
Noticed when debugging the irq_fpu_usable() bugs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Takashi Iwai [Mon, 13 Feb 2012 14:34:31 +0000 (15:34 +0100)]
Merge branch 'fix/acer-alc889-fix' into fix/hda
Conflicts:
sound/pci/hda/patch_realtek.c
Merged back the fix for Acer Aspire 6935 with ALC889 codec.
The fix commit was based on 3.2 kernel so that it can be applied to
stable kernel cleanly.
Takashi Iwai [Mon, 13 Feb 2012 14:25:07 +0000 (15:25 +0100)]
ALSA: hda - Fix silent speaker output on Acer Aspire 6935
Since 3.2 kernel, the driver starts trying to assign the multi-io DACs
before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for
the speaker for a standard laptop setup like a HP, a speaker, a mic-in
and a line-in. However, on Acer Aspire 6935, it seems that the
speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it
results in silence by some reason, although the codec itself allows
the routing to DAC3/4.
As a workaround, the connection list of each pin is reduced to be
mapped to either only DAC1/2 or DAC3/4, so that the compatible
assignment as in kernel 3.1 is achieved.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 13 Feb 2012 14:04:06 +0000 (15:04 +0100)]
ALSA: hda - Fix initialization of secondary capture source on VT1705
VT1705 codec has two ADCs where the secondary ADC has no MUX but only
a fixed connection to the mic pin. This confused the driver and it
tries always overriding the input-source selection by assumption of
the existing MUX for the secondary ADC, resulted in resetting the
input-source at each time PM (including power-saving) occurs.
The fix is simply to check the existence of MUX for secondary ADCs in
the initialization code.
Tested-by: Anisse Astier <anisse@astier.eu>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Russell King [Tue, 7 Feb 2012 11:03:23 +0000 (11:03 +0000)]
ARM: omap: resolve nebulous 'Error setting wl12xx data'
It's useful to print the error code when a called function fails so a
diagnosis of why it failed is possible. In this case, it fails because
we try to register some data for the wl12xx driver, but as the driver
is not configured, a stub function is used which simply returns -ENOSYS.
Let's do the simple thing for -rc and print the error code.
Also, the return code from platform_register_device() at each of these
sites was not being checked. Add some checking, and again print the
error code.
This should be fixed properly for the next merge window so we don't
issue error messages merely because a driver is not configured.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:59:37 +0000 (10:59 +0000)]
ARM: omap: fix wrapped error messages in omap_hwmod.c
While trying to debug my OMAP platforms, they emitted this message:
omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state
The following backtrace said it was from a function called '_enable',
which didn't provide much clue. Grepping didn't find it either.
The message is wrapped, so unwrap the message so grep can find it. Do
the same for three other messages in this file.
Acked-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:51:39 +0000 (10:51 +0000)]
ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c
The previous commit causes new section mismatch warnings:
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb30): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio()
The function omap_init_hsmmc() references
the function __init omap_mux_init_gpio().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_gpio is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb4c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio()
The function omap_init_hsmmc() references
the function __init omap_mux_init_gpio().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_gpio is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb60): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb6c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb78): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb90): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb9c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdba8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbc0): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbcc): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbd8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbf8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc04): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc10): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc28): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc34): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc40): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc58): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc64): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc70): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc7c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal()
The function omap_init_hsmmc() references
the function __init omap_mux_init_signal().
This is often because omap_init_hsmmc lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
Again, as for omap2_hsmmc_init(), these functions are callable at
runtime via the gpio-twl4030.c driver, and so these can't be marked
__init.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:45:50 +0000 (10:45 +0000)]
ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xd0f0): Section mismatch in reference from the function sdp3430_twl_gpio_setup() to the function .init.text:omap2_hsmmc_init()
The function sdp3430_twl_gpio_setup() references
the function __init omap2_hsmmc_init().
This is often because sdp3430_twl_gpio_setup lacks a __init
annotation or the annotation of omap2_hsmmc_init is wrong.
sdp3430_twl_gpio_setup() is called via platform data from the
gpio-twl4030 module, which can be inserted and removed at runtime.
This makes sdp3430_twl_gpio_setup() callable at runtime, and prevents
it being marked with an __init annotation.
As it calls omap2_hsmmc_init() unconditionally, the only resolution to
this warning is to remove the __init markings from omap2_hsmmc_init()
and its called functions. This addresses the functions in hsmmc.c.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:41:34 +0000 (10:41 +0000)]
ARM: omap: fix section mismatch error for omap_4430sdp_display_init()
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xb798): Section mismatch in reference from the function omap_4430sdp_display_init() to the function .init.text:omap_display_init()
The function omap_4430sdp_display_init() references
the function __init omap_display_init().
This is often because omap_4430sdp_display_init lacks a __init
annotation or the annotation of omap_display_init is wrong.
Fix this by adding __init to omap_4430sdp_display_init().
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:34:01 +0000 (10:34 +0000)]
ARM: omap: fix section mismatch warning for omap_secondary_startup()
WARNING: vmlinux.o(.text+0x1c664): Section mismatch in reference from the function omap_secondary_startup() to the function .cpuinit.text:secondary_startup()
The function omap_secondary_startup() references
the function __cpuinit secondary_startup().
This is often because omap_secondary_startup lacks a __cpuinit
annotation or the annotation of secondary_startup is wrong.
Unfortunately, fixing this causes a new warning which is harder to
solve:
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x5328): Section mismatch in reference from the function omap4_hotplug_cpu() to the function .cpuinit.text:omap_secondary_startup()
The function omap4_hotplug_cpu() references
the function __cpuinit omap_secondary_startup().
This is often because omap4_hotplug_cpu lacks a __cpuinit
annotation or the annotation of omap_secondary_startup is wrong.
because omap4_hotplug_cpu() is used by power management code as well,
which may not end up using omap_secondary_startup().
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 11:07:24 +0000 (11:07 +0000)]
ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init()
Found by review.
omap4_sdp4430_wifi_mux_init() is called by an __init marked function,
and only calls omap_mux_init_gpio() and omap_mux_init_signal() which
are both also an __init marked functions.
The only reason this doesn't issue a warning is because the compiler
inlines omap4_sdp4430_wifi_mux_init() into omap4_sdp4430_wifi_init().
So, lets add the __init annotation to ensure this remains safe should
the compiler choose not to inline.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:18:34 +0000 (10:18 +0000)]
ARM: omap: fix section mismatch warning in mux.c
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x15a4): Section mismatch in reference from the function omap_mux_init_signals() to the function .init.text:omap_mux_init_signal()
The function omap_mux_init_signals() references
the function __init omap_mux_init_signal().
This is often because omap_mux_init_signals lacks a __init
annotation or the annotation of omap_mux_init_signal is wrong.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:00:34 +0000 (10:00 +0000)]
ARM: omap: fix section mismatch errors in TWL PMIC driver
WARNING: drivers/mfd/built-in.o(.devinit.text+0x258): Section mismatch in reference from the function twl_probe() to the function .init.text:twl4030_power_init()
The function __devinit twl_probe() references
a function __init twl4030_power_init().
If twl4030_power_init is only used by twl_probe then
annotate twl4030_power_init with a matching annotation.
twl4030_power_init() references other __init marked functions, so
these too must become __devinit.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:23:43 +0000 (10:23 +0000)]
ARM: omap: fix uninformative vc/i2c configuration error message
On my OMAP4 platform, I'm getting this error message repeated several
times at boot:
omap_vc_i2c_init: I2C config for all channels must match.
omap_vc_i2c_init: I2C config for all channels must match.
This doesn't help identify what the problem is. Fix this message to
be more informative:
omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).
This allows us to identify which voltage domains have a problem, and
what the I2C configuration state (a boolean, i2c_high_speed) setting
being used actually is.
From this we find that omap4_core_pmic has i2c_high_speed false, but
omap4_iva_pmic and omap4_mpu_pmic both have it set true.
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 10:13:02 +0000 (10:13 +0000)]
ARM: omap: fix vc.c PMIC error message
While testing on my OMAP3430 platform, this error message was emitted:
omap_vc_init_channel: PMIC info requried to configure vc forvdd_core not populated.Hence cannot initialize vc
Trying to find this message was difficult because it was wrapped across
several lines. It also mis-spells "required", doesn't read very well,
and has spaces lacking. Let's replace it with a more concise:
omap_vc_init_channel: No PMIC info for vdd_core
While we're here, fix a simple spelling error in a comment.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 09:58:57 +0000 (09:58 +0000)]
ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error
When CONFIG_OF is disabled, the compile fails with:
arch/arm/mach-omap2/prm44xx.c:41: error: 'OMAP44XX_IRQ_PRCM' undeclared here (not in a function)
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Roy Zang [Fri, 13 Jan 2012 07:02:01 +0000 (15:02 +0800)]
mmc: esdhc: fix errors when booting kernel on Freescale eSDHC version 2.3
When eSDHC module is enabled on P5020/P3041/P2041/P1010 with eSDHC
version 2.3, there is following errors:
mmc0: Timeout waiting for hardware interrupt.
mmc0: error -110 whilst initialising SD card
mmc0: Unexpected interrupt 0x02000000.
mmc0: Timeout waiting for hardware interrupt.
mmc0: error -110 whilst initialising SD card
mmc0: Unexpected interrupt 0x02000000.
It is because eSDHC controller has different bit setting for PROCTL
register at 0x28 comparing SD specification.
This patch sets DMAS bits correctly for byte operation and does not
change the default value of other field of PROCTL register.
For other FSL chips, such as MPC8536/P2020, PROCTL[DMAS]
bits are reserved and even if they are set to wrong bits, it will not
take effective.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Linus Torvalds [Sat, 11 Feb 2012 18:07:11 +0000 (10:07 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Says Jens:
"Time to push off some of the pending items. I really wanted to wait
until we had the regression nailed, but alas it's not quite there yet.
But I'm very confident that it's "just" a missing expire on exit, so
fix from Tejun should be fairly trivial. I'm headed out for a week on
the slopes.
- Killing the barrier part of mtip32xx. It doesn't really support
barriers, and it doesn't need them (writes are fully ordered).
- A few fixes from Dan Carpenter, preventing overflows of integer
multiplication.
- A fixup for loop, fixing a previous commit that didn't quite solve
the partial read problem from Dave Young.
- A bio integer overflow fix from Kent Overstreet.
- Improvement/fix of the door "keep locked" part of the cdrom shared
code from Paolo Benzini.
- A few cfq fixes from Shaohua Li.
- A fix for bsg sysfs warning when removing a file it did not create
from Stanislaw Gruszka.
- Two fixes for floppy from Vivek, preventing a crash.
- A few block core fixes from Tejun. One killing the over-optimized
ioc exit path, cleaning that up nicely. Two others fixing an oops
on elevator switch, due to calling into the scheduler merge check
code without holding the queue lock."
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix lockdep warning on io_context release put_io_context()
relay: prevent integer overflow in relay_open()
loop: zero fill bio instead of return -EIO for partial read
bio: don't overflow in bio_get_nr_vecs()
floppy: Fix a crash during rmmod
floppy: Cleanup disk->queue before caling put_disk() if add_disk() was never called
cdrom: move shared static to cdrom_device_info
bsg: fix sysfs link remove warning
block: don't call elevator callbacks for plug merges
block: separate out blk_rq_merge_ok() and blk_try_merge() from elevator functions
mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data
block: strip out locking optimization in put_io_context()
cdrom: use copy_to_user() without the underscores
block: fix ioc locking warning
block: fix NULL icq_cache reference
block,cfq: change code order
Tejun Heo [Sat, 11 Feb 2012 11:37:25 +0000 (12:37 +0100)]
block: fix lockdep warning on io_context release put_io_context()
11a3122f6c "block: strip out locking optimization in put_io_context()"
removed ioc_lock depth lockdep annoation along with locking
optimization; however, while recursing from put_io_context() is no
longer possible, ioc_release_fn() may still end up putting the last
reference of another ioc through elevator, which wlil grab ioc->lock
triggering spurious (as the ioc is always different one) A-A deadlock
warning.
As this can only happen one time from ioc_release_fn(), using non-zero
subclass from ioc_release_fn() is enough. Use subclass 1.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Fri, 10 Feb 2012 22:18:46 +0000 (14:18 -0800)]
Merge git://git./linux/kernel/git/davem/net
Quoth David:
1) GRO MAC header comparisons were ethernet specific, breaking other
link types. This required a multi-faceted fix to cure the originally
noted case (Infiniband), because IPoIB was lying about it's actual
hard header length. Thanks to Eric Dumazet, Roland Dreier, and
others.
2) Fix build failure when INET_UDP_DIAG is built in and ipv6 is modular.
From Anisse Astier.
3) Off by ones and other bug fixes in netprio_cgroup from Neil Horman.
4) ipv4 TCP reset generation needs to respect any network interface
binding from the socket, otherwise route lookups might give a
different result than all the other segments received. From Shawn
Lu.
5) Fix unintended regression in ipv4 proxy ARP responses, from Thomas
Graf.
6) Fix SKB under-allocation bug in sh_eth, from Yoshihiro Shimoda.
7) Revert skge PCI mapping changes that are causing crashes for some
folks, from Stephen Hemminger.
8) IPV4 route lookups fill in the wildcarded fields of the given flow
lookup key passed in, which is fine most of the time as this is
exactly what the caller's want. However there are a few cases that
want to retain the original flow key values afterwards, so handle
those cases properly. Fix from Julian Anastasov.
9) IGB/IXGBE VF lookup bug fixes from Greg Rose.
10) Properly null terminate filename passed to ethtool flash device
method, from Ben Hutchings.
11) S3 resume fix in via-velocity from David Lv.
12) Fix double SKB free during xmit failure in CAIF, from Dmitry
Tarnyagin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled
ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr.
netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m
netprio_cgroup: don't allocate prio table when a device is registered
netprio_cgroup: fix an off-by-one bug
bna: fix error handling of bnad_get_flash_partition_by_offset()
isdn: type bug in isdn_net_header()
net: Make qdisc_skb_cb upper size bound explicit.
ixgbe: ethtool: stats user buffer overrun
ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state
ixgbe: do not update real num queues when netdev is going away
ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size
ixgbe: Fix case of Tx Hang in PF with 32 VFs
ixgbe: fix vf lookup
igb: fix vf lookup
e1000: add dropped DMA receive enable back in for WoL
gro: more generic L2 header check
IPoIB: Stop lying about hard_header_len and use skb->cb to stash LL addresses
zd1211rw: firmware needs duration_id set to zero for non-pspoll frames
net: enable TC35815 for MIPS again
...
Thomas Graf [Fri, 10 Feb 2012 04:07:11 +0000 (04:07 +0000)]
net: Don't proxy arp respond if iif == rt->dst.dev if private VLAN is disabled
Commit 653241 (net: RFC3069, private VLAN proxy arp support) changed
the behavior of arp proxy to send arp replies back out on the interface
the request came in even if the private VLAN feature is disabled.
Previously we checked rt->dst.dev != skb->dev for in scenarios, when
proxy arp is enabled on for the netdevice and also when individual proxy
neighbour entries have been added.
This patch adds the check back for the pneigh_lookup() scenario.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Wei [Thu, 9 Feb 2012 21:15:25 +0000 (21:15 +0000)]
ipv4: Fix wrong order of ip_rt_get_source() and update iph->daddr.
This patch fix a bug which introduced by commit
ac8a4810 (ipv4: Save
nexthop address of LSRR/SSRR option to IPCB.).In that patch, we saved
the nexthop of SRR in ip_option->nexthop and update iph->daddr until
we get to ip_forward_options(), but we need to update it before
ip_rt_get_source(), otherwise we may get a wrong src.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 10 Feb 2012 05:43:38 +0000 (05:43 +0000)]
netprio_cgroup: fix wrong memory access when NETPRIO_CGROUP=m
When the netprio_cgroup module is not loaded, net_prio_subsys_id
is -1, and so sock_update_prioidx() accesses cgroup_subsys array
with negative index subsys[-1].
Make the code resembles cls_cgroup code, which is bug free.
Origionally-authored-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 10 Feb 2012 05:43:37 +0000 (05:43 +0000)]
netprio_cgroup: don't allocate prio table when a device is registered
So we delay the allocation till the priority is set through cgroup,
and this makes skb_update_priority() faster when it's not set.
This also eliminates an off-by-one bug similar with the one fixed
in the previous patch.
Origionally-authored-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Fri, 10 Feb 2012 05:43:36 +0000 (05:43 +0000)]
netprio_cgroup: fix an off-by-one bug
# mount -t cgroup xxx /mnt
# mkdir /mnt/tmp
# cat /mnt/tmp/net_prio.ifpriomap
lo 0
eth0 0
virbr0 0
# echo 'lo 999' > /mnt/tmp/net_prio.ifpriomap
# cat /mnt/tmp/net_prio.ifpriomap
lo 999
eth0 0
virbr0
4101267344
We got weired output, because we exceeded the boundary of the array.
We may even crash the kernel..
Origionally-authored-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Hellwig [Wed, 1 Feb 2012 13:57:20 +0000 (13:57 +0000)]
xfs: use a normal shrinker for the dquot freelist
Stop reusing dquots from the freelist when allocating new ones directly, and
implement a shrinker that actually follows the specifications for the
interface. The shrinker implementation is still highly suboptimal at this
point, but we can gradually work on it.
This also fixes an bug in the previous lock ordering, where we would take
the hash and dqlist locks inside of the freelist lock against the normal
lock ordering. This is only solvable by introducing the dispose list,
and thus not when using direct reclaim of unused dquots for new allocations.
As a side-effect the quota upper bound and used to free ratio values in
/proc/fs/xfs/xqm are set to 0 as these values don't make any sense in the
new world order.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Linus Torvalds [Fri, 10 Feb 2012 17:06:25 +0000 (09:06 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2)
drm/i915: no lvds quirk for AOpen MP45
drm/i915: Force explicit bpp selection for intel_dp_link_required
drm/radeon: do not continue after error from r600_ib_test
drivers/gpu/drm/drm_ioc32.c: initialize all fields
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT
drm/i915:: Disable FBC on SandyBridge
Linus Torvalds [Fri, 10 Feb 2012 17:05:52 +0000 (09:05 -0800)]
Merge tag 'writeback-fixes' of git://git./linux/kernel/git/wfg/linux
fix 1 mysterious divide error
fix 3 NULL dereference bugs in writeback tracing, on SD card removal w/o umount
* tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue
lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel
writeback: fix NULL bdi->dev in trace writeback_single_inode
backing-dev: fix wakeup timer races with bdi_unregister()
Linus Torvalds [Fri, 10 Feb 2012 17:05:07 +0000 (09:05 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix double start/stop in x86_pmu_start()
perf evsel: Fix an issue where perf report fails to show the proper percentage
perf tools: Fix prefix matching for kernel maps
perf tools: Fix perf stack to non executable on x86_64
perf: Remove deprecated WARN_ON_ONCE()
Linus Torvalds [Fri, 10 Feb 2012 17:04:37 +0000 (09:04 -0800)]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging
Couple of regressions, couple of zero-day bugs, a minor enhancement.
Nothing really major.
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured value
hwmon: (f75375s) Fix bit shifting in f75375_write16
hwmon: (f75375s) Fix reading of wrong register when initializing the F75387
hwmon: (f75375s) Fix automatic pwm mode setting for F75373 & F75375
hwmon: (w83627ehf) Remove duplicate code
Axel Lin [Tue, 7 Feb 2012 03:12:55 +0000 (11:12 +0800)]
regulator: Fix getting voltage in max8649_enable_time()
Current code takes wrong parameter while calling max8649_list_voltage.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Dave Airlie [Fri, 10 Feb 2012 08:35:19 +0000 (08:35 +0000)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/keithp/linux into drm-fixes
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux:
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT (v2)
drm/i915: no lvds quirk for AOpen MP45
drm/i915: Force explicit bpp selection for intel_dp_link_required
drm/i915: fixup interlaced bits clearing in PIPECONF on PCH_SPLIT
drm/i915:: Disable FBC on SandyBridge
Dan Carpenter [Fri, 10 Feb 2012 08:03:58 +0000 (09:03 +0100)]
relay: prevent integer overflow in relay_open()
"subbuf_size" and "n_subbufs" come from the user and they need to be
capped to prevent an integer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
David Miller [Thu, 9 Feb 2012 21:43:01 +0000 (16:43 -0500)]
regulator: Fix mc13xxx regulator modular build (again)
Since mc13xxx-regulator-core.c and the actual drivers can get built
into seperate modules, you have to export the DT support symbols
"mc13xxx_get_num_regulators_dt" and "mc13xxx_parse_regulators_dt"
otherwise the allmodconfig build fails on sparc64.
[Updated the subject; the same thing was previously reported and fixed
in -next but for some reason nobody noticed for some considerable time
after the issue was introduced -- broonie]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Thu, 9 Feb 2012 21:52:57 +0000 (13:52 -0800)]
Merge tag 'tty-3.3-rc3' of git://git./linux/kernel/git/gregkh/tty
Serial/TTY fixes for the 3.3-rc3 tree
Just a few new device ids, omap serial driver regression fixes, and a
build fix for the 8250 driver movement.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'tty-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds
tty: serial: OMAP: block idle while the UART is transferring data in PIO mode
tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode
m32r: relocate drivers back out of 8250 dir
tty: fix a build failure on sparc
serial: samsung: Add support for EXYNOS5250
serial: samsung: Add support for EXYNOS4212 and EXYNOS4412
drivers/tty/vt/vt_ioctl.c: fix KDFONTOP 32bit compatibility layer
Linus Torvalds [Thu, 9 Feb 2012 21:52:18 +0000 (13:52 -0800)]
Merge tag 'staging-3.3-rc3' of git://git./linux/kernel/git/gregkh/staging
Staging tree patches for 3.3-rc3
Big things here is the deletion of the Android pmem driver, as it's
obsolete and no one uses it, the gma500 driver as it's already in the
drm portion of the kernel tree, and the pohmelfs filesystem as it's
obsolete and a rewritten version is being proposed for the fs/ section
of the kernel.
Other than that, a smattering of different bugfixes and regressions, and
some omap drm api merge fixups that were needed due to api changes in
the main portion of the drm tree, allowing this code to build properly
again.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'staging-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (28 commits)
staging: pohmelfs: remove drivers/staging/pohmelfs
staging: android/ram_console: Don't build on arches w/o ioremap
staging: r8712u: Use asynchronous firmware loading
staging: usbip: fix to prevent potentially using uninitialized spinlock
staging: r8712u: Fix problem when CONFIG_R8712_AP is set
staging: tidspbridge: fix incorrect free to drv_datap
staging: tidspbridge: fix bridge_open memory leaks
staging: android: lowmemorykiller: Don't wait more than one second for a process to die
MAINTAINERS: staging: iio: add iio information
staging: zcache: fix serialization bug in zv stats
staging: fix go7007-usb license
Staging: android: binder: Fix crashes when sharing a binder file between processes
Staging: android: Remove pmem driver
Staging: asus_oled: fix NULL-ptr crash on unloading
Staging: asus_oled: fix image processing
Staging: android: binder: Don't call dump_stack in binder_vma_open
staging: r8712u: Add new Sitecom UsB ID
zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.
zcache: fix deadlock condition
staging: drm/omap: fix locking issue
...
Linus Torvalds [Thu, 9 Feb 2012 21:51:36 +0000 (13:51 -0800)]
Merge tag 'driver-core-3.3-rc3' of git://git./linux/kernel/git/gregkh/driver-core
Driver core fixes for the 3.3-rc3 tree.
A few fixes for kobject warnings that have popped up in the cpu hotplug path,
and a regression fix for the speed of the hotplug memory code.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'driver-core-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver-core: cpu: fix kobject warning when hotplugging a cpu
ACPI: remove duplicated lines of merging problems with acpi_processor_add
docbook: fix fatal errors in device-drivers docbook and add DMA Management section
drivers/base/memory.c: fix memory_dev_init() long delay
driver core: cpu: remove kernel warning when removing a cpu
Linus Torvalds [Thu, 9 Feb 2012 21:51:13 +0000 (13:51 -0800)]
Merge tag 'char-misc-3.3-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Minor char-misc fixes for 3.3-rc3
Nothing big here, some Kconfig fixes for the MISC_DEVICES config option
that was being used incorrectly, and some other minor bug fixes.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'char-misc-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip
cs5535-mfgpt: don't call __init function from __devinit
vmw_balloon: fix for a -Wuninitialized warning
drivers: misc: Remove MISC_DEVICES config option
c2port: fix build error for duramar2150 due to missing header.
Linus Torvalds [Thu, 9 Feb 2012 21:50:54 +0000 (13:50 -0800)]
Merge tag 'usb-3.3-rc3' of git://git./linux/kernel/git/gregkh/usb
USB fixes for 3.3-rc3
Here are a few minor USB fixes and a bunch of device id updates for the
USB drivers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'usb-3.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: usbserial: add new PID number (0xa951) to the ftdi driver
usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
usb: musb: fix a build error on mips
uwb & wusb & usb wireless controllers: fix kconfig error & build errors
usb: Skip PCI USB quirk handling for Netlogic XLP
powerpc/usb: fix issue of CPU halt when missing USB PHY clock
usb: otg: mv_otg: Add dependence
usb: host: Distinguish Kconfig text for Freescale controllers
USB: add new zte 3g-dongle's pid to option.c
usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()
USB: qcserial: don't enable autosuspend
USB: qcserial: add several new serial devices
usb: otg: mv_otg: Add dependence
usb: gadget: zero: fix bug in loopback autoresume handling
Dan Carpenter [Thu, 9 Feb 2012 00:49:34 +0000 (00:49 +0000)]
bna: fix error handling of bnad_get_flash_partition_by_offset()
The current error handling doesn't work because we flash_part is a u32
so the checks for negative error codes don't work. I considered making
things signed but I don't know the hardware enough to say if that's a
problem. Really, we don't use the error codes so just returning zero
for all problems is fine.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 9 Feb 2012 00:46:47 +0000 (00:46 +0000)]
isdn: type bug in isdn_net_header()
We use len to store the return value from eth_header(). eth_header()
can return -ETH_HLEN (-14). We want to pass this back instead of
truncating it to 65522 and returning that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolaus Schulz [Wed, 8 Feb 2012 17:56:11 +0000 (18:56 +0100)]
hwmon: (f75375s) Let f75375_update_device treat pwmX as a measured value
Treat pwmX as a measured value, not as a (mostly static) limit value, so
that it is updated more frequently from the device register.
Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
David S. Miller [Mon, 6 Feb 2012 20:14:37 +0000 (15:14 -0500)]
net: Make qdisc_skb_cb upper size bound explicit.
Just like skb->cb[], so that qdisc_skb_cb can be encapsulated inside
of other data structures.
This is intended to be used by IPoIB so that it can remember
addressing information stored at hard_header_ops->create() time that
it can fetch when the packet gets to the transmit routine.
Signed-off-by: David S. Miller <davem@davemloft.net>
Paul Walmsley [Thu, 26 Jan 2012 02:50:56 +0000 (19:50 -0700)]
tty: serial: omap-serial: wakeup latency constraint is in microseconds, not milliseconds
The receive FIFO wakeup latency estimate in the omap-serial driver is
three orders of magnitude too small. This effectively prevents the
MPU from going to a low-power state when CONFIG_CPU_IDLE=y. This is a
major power management regression and masks some other FIFO-related
bugs in the driver.
Fix by correcting the most egregious problem in the RX wakeup latency
estimate. There are several other flaws in the estimator; these will
be fixed by a separate patch series intended for 3.4.
The difference in low-power states with this patch can be observed via
debugfs in pm_debug/count.
This estimate does not have any effect when CONFIG_CPU_IDLE=n.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Walmsley [Thu, 26 Jan 2012 02:50:52 +0000 (19:50 -0700)]
tty: serial: OMAP: block idle while the UART is transferring data in PIO mode
Prevent OMAP UARTs from going idle while they are still transferring
data in PIO mode. This works around an oversight in the OMAP UART
hardware present in OMAP34xx and earlier: an idle UART won't send a
wakeup when the TX FIFO threshold is reached. This causes long delays
during data transmission when the MPU powerdomain enters a low-power
mode. The MPU interrupt controller is not able to respond to
interrupts when it's in a low-power state, so the TX buffer is not
refilled until another wakeup event occurs.
This fix changes the erratum i291 DMA idle workaround. Rather than
toggling between force-idle and no-idle, it will toggle between
smart-idle and no-idle. The important part of the workaround is the
no-idle part, so this shouldn't result in any change in behavior.
This fix should work on all OMAP UARTs. Future patches intended for
the 3.4 merge window will make this workaround conditional on a
"feature" flag, and will use the OMAP36xx+ TX event wakeup support.
Thanks to Kevin Hilman <khilman@ti.com> for mentioning the erratum i291
workaround, which led to the development of this approach.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Walmsley [Thu, 26 Jan 2012 02:50:36 +0000 (19:50 -0700)]
tty: serial: OMAP: use a 1-byte RX FIFO threshold in PIO mode
In the (default) PIO mode, use a one-byte RX FIFO threshold. The OMAP
UART IP blocks do not appear to be capable of waking the system under
an RX timeout condition. Since the previous RX FIFO threshold was 16
bytes, this meant that omap-serial.c did not become aware of any
received data until all those bytes arrived or until another UART
interrupt occurred. This made the serial console and presumably other
serial applications (GPS, serial Bluetooth) unusable or extremely
slow. A 1-byte RX FIFO threshold also allows the MPU to enter a
low-power consumption state while waiting for the FIFO to fill.
This can be verified using the serial console by comparing the
behavior when "
0123456789abcde" is pasted in from another window, with
the behavior when "
0123456789abcdef" is pasted in. Since the former
string is less than sixteen bytes long, the string is not echoed for
some time, while the latter string is echoed immediately.
DMA operation is unaffected by this patch.
Thanks to Russell King - ARM Linux <linux@arm.linux.org.uk> for some
additional information on the standard behavior of the RX timeout
event, which was used to improve this commit description.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Govindraj Raja <govindraj.r@ti.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Thu, 9 Feb 2012 15:48:20 +0000 (15:48 +0000)]
Reduce the number of expensive division instructions done by _parse_integer()
_parse_integer() does one or two division instructions (which are slow)
per digit parsed to perform the overflow check.
Furthermore, these are particularly expensive examples of division
instruction as the number of clock cycles required to complete them may
go up with the position of the most significant set bit in the dividend:
if (*res > div_u64(ULLONG_MAX - val, base))
which is as maximal as possible.
Worse, on 32-bit arches, more than one of these division instructions
may be required per digit.
So, assuming we don't support a base of more than 16, skip the check if the
top nibble of the result is not set at this point.
Signed-off-by: David Howells <dhowells@redhat.com>
[ Changed it to not dereference the pointer all the time - even if the
compiler can and does optimize it away, the code just looks cleaner.
And edited the top nybble test slightly to make the code generated on
x86-64 better in the loop - test against a hoisted constant instead of
shifting and testing the result ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Russell King [Tue, 7 Feb 2012 09:47:21 +0000 (09:47 +0000)]
ARM: omap: fix broken twl-core dependencies and ifdefs
In commit
aeb5032b3f, a dependency on IRQ_DOMAIN was added, which causes
regressions on previously working setups: a previously working non-DT
kernel configuration now loses its PMIC support. The lack of PMIC
support in turn causes the loss of other functionality the kernel had.
This dependency was added because the driver now registers its
interrupts with the IRQ domain code, presumably to prevent a build error.
The result is that OMAP3 oopses in the vp.c code (fixed by a previous
commit) due to the lack of PMIC support.
However, even with IRQ_DOMAIN enabled, the driver oopses:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: Oops: 5 [#1] SMP
Modules linked in:
CPU: 1 Not tainted (3.3.0-rc2+ #271)
PC is at irq_domain_add+0x1c/0x134
LR is at twl_probe+0xd0/0x370
pc : [<
c007bad0>] lr : [<
c029baac>] psr:
00000113
sp :
df843c48 ip :
df843c68 fp :
df843c64
r10:
c02b93e4 r9 :
00000000 r8 :
c029b9dc
r7 :
df9d8a00 r6 :
c03bef90 r5 :
00000000 r4 :
c03f5240
r3 :
00000000 r2 :
c03f5240 r1 :
00000015 r0 :
c03f5240
Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
10c5387d Table:
8000404a DAC:
00000015
Process swapper/0 (pid: 1, stack limit = 0xdf8422f0)
Stack: (0xdf843c48 to 0xdf844000)
3c40:
00000014 00000170 00000014 c03bef90 df843c9c df843c68
3c60:
c029baac c007bac0 00000000 df9d8a20 00000001 c03cd238 c02b93e4 df9d8a20
3c80:
df9d8a04 df9d8a00 c029b9dc df8cae08 df843cc4 df843ca0 c01eee70 c029b9e8
...
Backtrace:
[<
c007bab4>] (irq_domain_add+0x0/0x134) from [<
c029baac>] (twl_probe+0xd0/0x370)
r6:
c03bef90 r5:
00000014 r4:
00000170
[<
c029b9dc>] (twl_probe+0x0/0x370) from [<
c01eee70>] (i2c_device_probe+0xb0/0xe4)
[<
c01eedc0>] (i2c_device_probe+0x0/0xe4) from [<
c01d1f34>] (really_probe+0xa0/0x178)
r8:
df8f0070 r7:
c03cd238 r6:
df9d8a20 r5:
df9d8a20 r4:
df9d8a20
[<
c01d1e94>] (really_probe+0x0/0x178) from [<
c01d205c>] (driver_probe_device+0x50/0x68)
r7:
df843d18 r6:
df9d8a20 r5:
c03cd238 r4:
df9d8a20
[<
c01d200c>] (driver_probe_device+0x0/0x68) from [<
c01d2148>] (__device_attach+0x44/0x48)
r5:
df9d8a20 r4:
c03cd238
[<
c01d2104>] (__device_attach+0x0/0x48) from [<
c01d0840>] (bus_for_each_drv+0x58/0x98)
r5:
c01d2104 r4:
00000000
[<
c01d07e8>] (bus_for_each_drv+0x0/0x98) from [<
c01d21f8>] (device_attach+0x80/0xac)
r7:
df9d8a28 r6:
df9d8a54 r5:
c03cd978 r4:
df9d8a20
[<
c01d2178>] (device_attach+0x0/0xac) from [<
c01d1430>] (bus_probe_device+0x34/0xa4)
r6:
df9d8a20 r5:
c03cd978 r4:
df9d8a20
[<
c01d13fc>] (bus_probe_device+0x0/0xa4) from [<
c01cffb0>] (device_add+0x2a0/0x420)
r6:
00000000 r5:
df9d8a20 r4:
df9d8a20
[<
c01cfd10>] (device_add+0x0/0x420) from [<
c01d0150>] (device_register+0x20/0x24)
r8:
df9d8a00 r7:
df9d8a04 r6:
df8f0048 r5:
df9d8a00 r4:
df9d8a20
[<
c01d0130>] (device_register+0x0/0x24) from [<
c01ef8d4>] (i2c_new_device+0x118/0x180)
r4:
df9d8a20
[<
c01ef7bc>] (i2c_new_device+0x0/0x180) from [<
c01efc88>] (i2c_register_adapter+0x140/0x204)
r8:
c03cd970 r7:
00000000 r6:
df8f0070 r5:
df8a6300 r4:
df8f0048
[<
c01efb48>] (i2c_register_adapter+0x0/0x204) from [<
c01efe9c>] (i2c_add_numbered_adapter+0xb4/0xcc)
r8:
df8a4c54 r7:
df8cae00 r6:
df843e2c r5:
df8f0048 r4:
00000000
[<
c01efde8>] (i2c_add_numbered_adapter+0x0/0xcc) from [<
c029ce1c>] (omap_i2c_probe+0x2f8/0x3b4)
r6:
00000000 r5:
df8f0000 r4:
df8f0070
[<
c029cb24>] (omap_i2c_probe+0x0/0x3b4) from [<
c01d3484>] (platform_drv_probe+0x20/0x24)
[<
c01d3464>] (platform_drv_probe+0x0/0x24) from [<
c01d1f34>] (really_probe+0xa0/0x178)
[<
c01d1e94>] (really_probe+0x0/0x178) from [<
c01d205c>] (driver_probe_device+0x50/0x68)
r7:
df843ef0 r6:
c03cdb2c r5:
c03cdb2c r4:
df8cae08
[<
c01d200c>] (driver_probe_device+0x0/0x68) from [<
c01d20e0>] (__driver_attach+0x6c/0x90)
r5:
df8cae3c r4:
df8cae08
[<
c01d2074>] (__driver_attach+0x0/0x90) from [<
c01d08d8>] (bus_for_each_dev+0x58/0x98)
r6:
c03cdb2c r5:
c01d2074 r4:
00000000
[<
c01d0880>] (bus_for_each_dev+0x0/0x98) from [<
c01d1d80>] (driver_attach+0x20/0x28)
r7:
df880b80 r6:
c03cdb2c r5:
c03cdb2c r4:
c0394f28
[<
c01d1d60>] (driver_attach+0x0/0x28) from [<
c01d115c>] (bus_add_driver+0xb4/0x230)
[<
c01d10a8>] (bus_add_driver+0x0/0x230) from [<
c01d278c>] (driver_register+0xc8/0x154)
[<
c01d26c4>] (driver_register+0x0/0x154) from [<
c01d37e4>] (platform_driver_register+0x4c/0x60)
r8:
00000000 r7:
00000013 r6:
c00384c8 r5:
c0395180 r4:
c0394f28
[<
c01d3798>] (platform_driver_register+0x0/0x60) from [<
c038626c>] (omap_i2c_init_driver+0x14/0x1c)
[<
c0386258>] (omap_i2c_init_driver+0x0/0x1c) from [<
c00087b8>] (do_one_initcall+0x9c/0x164)
[<
c000871c>] (do_one_initcall+0x0/0x164) from [<
c036c2f4>] (kernel_init+0x90/0x138)
[<
c036c264>] (kernel_init+0x0/0x138) from [<
c00384c8>] (do_exit+0x0/0x2ec)
r5:
c036c264 r4:
00000000
<0>Code:
e24dd004 e5903014 e1a04000 e5905010 (
e5933000)
<4>---[ end trace
1b75b31a2719ed1c ]---
This happens because we try to register an IRQ domain with a NULL ops
structure, and the first thing irq_domain_add() does is try to
dereference this ops structure.
So, fix the problem by getting rid of the incorrect OF_IRQ ifdef and
wrapping the IRQ domain bits of the driver with an IRQ_DOMAIN ifdef
instead.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 09:44:55 +0000 (09:44 +0000)]
ARM: omap: fix oops in drivers/video/omap2/dss/dpi.c
When a PMIC is not found, this driver is unable to obtain its
'vdds_dsi_reg' regulator. Even through its initialization function
fails, other code still calls its enable function, which fails to
check whether it has this regulator before asking for it to be enabled.
This fixes the oops, however a better fix would be to sort out the
upper layers to prevent them calling into a module which failed to
initialize.
Unable to handle kernel NULL pointer dereference at virtual address
00000038
pgd =
c0004000
[
00000038] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0 Not tainted (3.3.0-rc2+ #228)
PC is at regulator_enable+0x10/0x70
LR is at omapdss_dpi_display_enable+0x54/0x15c
pc : [<
c01b9a08>] lr : [<
c01af994>] psr:
60000013
sp :
c181fd90 ip :
c181fdb0 fp :
c181fdac
r10:
c042eff0 r9 :
00000060 r8 :
c044a164
r7 :
c042c0e4 r6 :
c042bd60 r5 :
00000000 r4 :
c042bd60
r3 :
c084de48 r2 :
c181e000 r1 :
c042bd60 r0 :
00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
10c5387d Table:
80004019 DAC:
00000015
Process swapper (pid: 1, stack limit = 0xc181e2e8)
Stack: (0xc181fd90 to 0xc1820000)
fd80:
c001754c c042bd60 00000000 c042bd60
fda0:
c181fdcc c181fdb0 c01af994 c01b9a04 c0016104 c042bd60 c042bd60 c044a338
fdc0:
c181fdec c181fdd0 c01b5ed0 c01af94c c042bd60 c042bd60 c1aa8000 c1aa8a0c
fde0:
c181fe04 c181fdf0 c01b5f54 c01b5ea8 c02fc18c c042bd60 c181fe3c c181fe08
fe00:
c01b2a18 c01b5f48 c01aed14 c02fc160 c01df8ec 00000002 c042bd60 00000003
fe20:
c042bd60 c1aa8000 c1aa8a0c c042eff8 c181fe84 c181fe40 c01b3874 c01b29fc
fe40:
c042eff8 00000000 c042f000 c0449db8 c044ed78 00000000 c181fe74 c042eff8
fe60:
c042eff8 c0449db8 c0449db8 c044ed78 00000000 00000000 c181fe94 c181fe88
fe80:
c01e452c c01b35e8 c181feb4 c181fe98 c01e2fdc c01e4518 c042eff8 c0449db8
fea0:
c0449db8 c181fef0 c181fecc c181feb8 c01e3104 c01e2f48 c042eff8 c042f02c
fec0:
c181feec c181fed0 c01e3190 c01e30c0 c01e311c 00000000 c01e311c c0449db8
fee0:
c181ff14 c181fef0 c01e1998 c01e3128 c18330a8 c1892290 c04165e8 c0449db8
ff00:
c0449db8 c1ab60c0 c181ff24 c181ff18 c01e2e28 c01e194c c181ff54 c181ff28
ff20:
c01e2218 c01e2e14 c039afed c181ff38 c04165e8 c041660c c0449db8 00000013
ff40:
00000000 c03ffdb8 c181ff7c c181ff58 c01e384c c01e217c c181ff7c c04165e8
ff60:
c041660c c003a37c 00000013 00000000 c181ff8c c181ff80 c01e488c c01e3790
ff80:
c181ff9c c181ff90 c03ffdcc c01e484c c181ffdc c181ffa0 c0008798 c03ffdc4
ffa0:
c181ffc4 c181ffb0 c0056440 c0187810 c003a37c c04165e8 c041660c c003a37c
ffc0:
00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03ea284 c0008708
ffe0:
00000000 c03ea208 00000000 c181fff8 c003a37c c03ea214 1073cec0 01f7ee08
Backtrace:
[<
c01b99f8>] (regulator_enable+0x0/0x70) from [<
c01af994>] (omapdss_dpi_display_enable+0x54/0x15c)
r6:
c042bd60 r5:
00000000 r4:
c042bd60
[<
c01af940>] (omapdss_dpi_display_enable+0x0/0x15c) from [<
c01b5ed0>] (generic_dpi_panel_power_on+0x34/0x78)
r6:
c044a338 r5:
c042bd60 r4:
c042bd60
[<
c01b5e9c>] (generic_dpi_panel_power_on+0x0/0x78) from [<
c01b5f54>] (generic_dpi_panel_enable+0x18/0x28)
r7:
c1aa8a0c r6:
c1aa8000 r5:
c042bd60 r4:
c042bd60
[<
c01b5f3c>] (generic_dpi_panel_enable+0x0/0x28) from [<
c01b2a18>] (omapfb_init_display+0x28/0x150)
r4:
c042bd60
[<
c01b29f0>] (omapfb_init_display+0x0/0x150) from [<
c01b3874>] (omapfb_probe+0x298/0x318)
r8:
c042eff8 r7:
c1aa8a0c r6:
c1aa8000 r5:
c042bd60 r4:
00000003
[<
c01b35dc>] (omapfb_probe+0x0/0x318) from [<
c01e452c>] (platform_drv_probe+0x20/0x24)
[<
c01e450c>] (platform_drv_probe+0x0/0x24) from [<
c01e2fdc>] (really_probe+0xa0/0x178)
[<
c01e2f3c>] (really_probe+0x0/0x178) from [<
c01e3104>] (driver_probe_device+0x50/0x68)
r7:
c181fef0 r6:
c0449db8 r5:
c0449db8 r4:
c042eff8
[<
c01e30b4>] (driver_probe_device+0x0/0x68) from [<
c01e3190>] (__driver_attach+0x74/0x98)
r5:
c042f02c r4:
c042eff8
[<
c01e311c>] (__driver_attach+0x0/0x98) from [<
c01e1998>] (bus_for_each_dev+0x58/0x98)
r6:
c0449db8 r5:
c01e311c r4:
00000000
[<
c01e1940>] (bus_for_each_dev+0x0/0x98) from [<
c01e2e28>] (driver_attach+0x20/0x28)
r7:
c1ab60c0 r6:
c0449db8 r5:
c0449db8 r4:
c04165e8
[<
c01e2e08>] (driver_attach+0x0/0x28) from [<
c01e2218>] (bus_add_driver+0xa8/0x22c)
[<
c01e2170>] (bus_add_driver+0x0/0x22c) from [<
c01e384c>] (driver_register+0xc8/0x154)
[<
c01e3784>] (driver_register+0x0/0x154) from [<
c01e488c>] (platform_driver_register+0x4c/0x60)
r8:
00000000 r7:
00000013 r6:
c003a37c r5:
c041660c r4:
c04165e8
[<
c01e4840>] (platform_driver_register+0x0/0x60) from [<
c03ffdcc>] (omapfb_init+0x14/0x34)
[<
c03ffdb8>] (omapfb_init+0x0/0x34) from [<
c0008798>] (do_one_initcall+0x9c/0x164)
[<
c00086fc>] (do_one_initcall+0x0/0x164) from [<
c03ea284>] (kernel_init+0x7c/0x120)
[<
c03ea208>] (kernel_init+0x0/0x120) from [<
c003a37c>] (do_exit+0x0/0x2d8)
r5:
c03ea208 r4:
00000000
Code:
e1a0c00d e92dd870 e24cb004 e24dd004 (
e5906038)
---[ end trace
9e2474c2e193b223 ]---
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Tue, 7 Feb 2012 09:42:11 +0000 (09:42 +0000)]
ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found
When the PMIC is not found, voltdm->pmic will be NULL. vp.c's
initialization function tries to dereferences this, which causes an
oops:
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
c0004000
[
00000000] *pgd=
00000000
Internal error: Oops: 5 [#1] PREEMPT
Modules linked in:
CPU: 0 Not tainted (3.3.0-rc2+ #204)
PC is at omap_vp_init+0x5c/0x15c
LR is at omap_vp_init+0x58/0x15c
pc : [<
c03db880>] lr : [<
c03db87c>] psr:
60000013
sp :
c181ff30 ip :
c181ff68 fp :
c181ff64
r10:
c0407808 r9 :
c040786c r8 :
c0407814
r7 :
c0026868 r6 :
c00264fc r5 :
c040ad6c r4 :
00000000
r3 :
00000040 r2 :
000032c8 r1 :
0000fa00 r0 :
000032c8
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel
Control:
10c5387d Table:
80004019 DAC:
00000015
Process swapper (pid: 1, stack limit = 0xc181e2e8)
Stack: (0xc181ff30 to 0xc1820000)
ff20:
c0381d00 c02e9c6d c0383582 c040786c
ff40:
c040ad6c c00264fc c0026868 c0407814 00000000 c03d9de4 c181ff8c c181ff68
ff60:
c03db448 c03db830 c02e982c c03fdfb8 c03fe004 c0039988 00000013 00000000
ff80:
c181ff9c c181ff90 c03d9df8 c03db390 c181ffdc c181ffa0 c0008798 c03d9df0
ffa0:
c181ffc4 c181ffb0 c0055a44 c0187050 c0039988 c03fdfb8 c03fe004 c0039988
ffc0:
00000013 00000000 00000000 00000000 c181fff4 c181ffe0 c03d1284 c0008708
ffe0:
00000000 c03d1208 00000000 c181fff8 c0039988 c03d1214 1077ce40 01f7ee08
Backtrace:
[<
c03db824>] (omap_vp_init+0x0/0x15c) from [<
c03db448>] (omap_voltage_late_init+0xc4/0xfc)
[<
c03db384>] (omap_voltage_late_init+0x0/0xfc) from [<
c03d9df8>] (omap2_common_pm_late_init+0x14/0x54)
r8:
00000000 r7:
00000013 r6:
c0039988 r5:
c03fe004 r4:
c03fdfb8
[<
c03d9de4>] (omap2_common_pm_late_init+0x0/0x54) from [<
c0008798>] (do_one_initcall+0x9c/0x164)
[<
c00086fc>] (do_one_initcall+0x0/0x164) from [<
c03d1284>] (kernel_init+0x7c/0x120)
[<
c03d1208>] (kernel_init+0x0/0x120) from [<
c0039988>] (do_exit+0x0/0x2cc)
r5:
c03d1208 r4:
00000000
Code:
e5ca300b e5900034 ebf69027 e5994024 (
e5941000)
---[ end trace
aed617dddaf32c3d ]---
Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Stephen Boyd [Tue, 7 Feb 2012 18:42:33 +0000 (19:42 +0100)]
ARM: 7322/1: Print BUG instead of undefined instruction on BUG_ON()
The ARM kernel uses undefined instructions to implement
BUG/BUG_ON(). This leads to problems where people don't read one
line above the Oops message and see the "kernel BUG at ..."
message and so they wrongly assume the kernel has hit an
undefined instruction.
Instead of printing:
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
print
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
This should prevent people from thinking the BUG_ON was an
undefined instruction when it was actually intentional.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Stephen Boyd [Tue, 7 Feb 2012 18:42:07 +0000 (19:42 +0100)]
ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR
armv7's flush_cache_all() flushes caches via set/way. To
determine the cache attributes (line size, number of sets,
etc.) the assembly first writes the CSSELR register to select a
cache level and then reads the CCSIDR register. The CSSELR register
is banked per-cpu and is used to determine which cache level CCSIDR
reads. If the task is migrated between when the CSSELR is written and
the CCSIDR is read the CCSIDR value may be for an unexpected cache
level (for example L1 instead of L2) and incorrect cache flushing
could occur.
Disable interrupts across the write and read so that the correct
cache attributes are read and used for the cache flushing
routine. We disable interrupts instead of disabling preemption
because the critical section is only 3 instructions and we want
to call v7_dcache_flush_all from __v7_setup which doesn't have a
full kernel stack with a struct thread_info.
This fixes a problem we see in scm_call() when flush_cache_all()
is called from preemptible context and sometimes the L2 cache is
not properly flushed out.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Marc Zyngier [Tue, 7 Feb 2012 01:46:38 +0000 (02:46 +0100)]
ARM: 7320/1: Fix proc_info table alignment
With an admittedly exotic choice of configuration options
(CC_OPTIMIZE_FOR_SIZE, THUMB2, some other size-minimizing ones)
and compiler, the proc_info table can end up being misaligned,
and the kernel being unbootable (Error: unrecognized/unsupported
processor variant).
Forcing the alignement to 4 bytes in the linker script fixes the
issue.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Kuninori Morimoto [Thu, 9 Feb 2012 00:57:29 +0000 (16:57 -0800)]
ASoC: fsi: fixup fsi_pointer() calculation method
current fsi_pointer() calculation was not correct for FSI driver.
This patch fix it up.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
John Fastabend [Sat, 28 Jan 2012 03:32:17 +0000 (03:32 +0000)]
ixgbe: ethtool: stats user buffer overrun
If the number of tx/rx queues changes the ethtool ioctl
ETHTOOL_GSTATS may overrun the userspace buffer. This
occurs because the general practice in user space to
query stats is to issue a ETHTOOL_GSSET cmd to learn the
buffer size needed, allocate the buffer, then call
ETHTOOL_GSTIRNGS and ETHTOOL_GSTATS. If the number of
real_num_queues is changed or flow control attributes
are changed after ETHTOOL_GSSET but before the
ETHTOOL_GSTRINGS/ETHTOOL_GSTATS a user space buffer
overrun occurs.
To fix the overrun always return the max buffer size
needed from get_sset_count() then return all strings
and stats from get_strings()/get_ethtool_stats().
This _will_ change the output from the ioctl() call
which could break applications and script parsing in
theory. I believe these changes should not break existing
tools because the only changes will be more {tx|rx}_queues
and the {tx|rx}_pb_* stats will always be returned.
Existing scripts already need to handle changing number
of queues because this occurs today depending on system
and current features. The {tx|rx}_pb_* stats are at the
end of the output and should be handled by scripts today
regardless.
Finally get_ethtool_stats and get_strings are free-form
outputs tools parsing these outputs should be defensive
anyways. In the end these updates are better then
having a tool segfault because of a buffer overrun.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
John Fastabend [Sat, 28 Jan 2012 01:22:35 +0000 (01:22 +0000)]
ixgbe: dcb: up2tc mapping lost on disable/enable CEE DCB state
Users expect the up2tc mapping to be maintained across a DCB
enable/disable/enable transition. And since we maintain all
the other DCB attributes we should do this for up2tc mappings
as well just to be consistent. Also without this we break
user space applications that expect this to occur that
previously worked.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Yi Zou [Sat, 7 Jan 2012 08:39:50 +0000 (08:39 +0000)]
ixgbe: do not update real num queues when netdev is going away
If the netdev is already in NETREG_UNREGISTERING/_UNREGISTERED state, do not
update the real num tx queues. netdev_queue_update_kobjects() is already
called via remove_queue_kobjects() at NETREG_UNREGISTERING time. So, when
upper layer driver, e.g., FCoE protocol stack is monitoring the netdev
event of NETDEV_UNREGISTER and calls back to LLD ndo_fcoe_disable() to remove
extra queues allocated for FCoE, the associated txq sysfs kobjects are already
removed, and trying to update the real num queues would cause something like
below:
...
PID: 25138 TASK:
ffff88021e64c440 CPU: 3 COMMAND: "kworker/3:3"
#0 [
ffff88021f007760] machine_kexec at
ffffffff810226d9
#1 [
ffff88021f0077d0] crash_kexec at
ffffffff81089d2d
#2 [
ffff88021f0078a0] oops_end at
ffffffff813bca78
#3 [
ffff88021f0078d0] no_context at
ffffffff81029e72
#4 [
ffff88021f007920] __bad_area_nosemaphore at
ffffffff8102a155
#5 [
ffff88021f0079f0] bad_area_nosemaphore at
ffffffff8102a23e
#6 [
ffff88021f007a00] do_page_fault at
ffffffff813bf32e
#7 [
ffff88021f007b10] page_fault at
ffffffff813bc045
[exception RIP: sysfs_find_dirent+17]
RIP:
ffffffff81178611 RSP:
ffff88021f007bc0 RFLAGS:
00010246
RAX:
ffff88021e64c440 RBX:
ffffffff8156cc63 RCX:
0000000000000004
RDX:
ffffffff8156cc63 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff88021f007be0 R8:
0000000000000004 R9:
0000000000000008
R10:
ffffffff816fed00 R11:
0000000000000004 R12:
0000000000000000
R13:
ffffffff8156cc63 R14:
0000000000000000 R15:
ffff8802222a0000
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#8 [
ffff88021f007be8] sysfs_get_dirent at
ffffffff81178c07
#9 [
ffff88021f007c18] sysfs_remove_group at
ffffffff8117ac27
#10 [
ffff88021f007c48] netdev_queue_update_kobjects at
ffffffff813178f9
#11 [
ffff88021f007c88] netif_set_real_num_tx_queues at
ffffffff81303e38
#12 [
ffff88021f007cc8] ixgbe_set_num_queues at
ffffffffa0249763 [ixgbe]
#13 [
ffff88021f007cf8] ixgbe_init_interrupt_scheme at
ffffffffa024ea89 [ixgbe]
#14 [
ffff88021f007d48] ixgbe_fcoe_disable at
ffffffffa0267113 [ixgbe]
#15 [
ffff88021f007d68] vlan_dev_fcoe_disable at
ffffffffa014fef5 [8021q]
#16 [
ffff88021f007d78] fcoe_interface_cleanup at
ffffffffa02b7dfd [fcoe]
#17 [
ffff88021f007df8] fcoe_destroy_work at
ffffffffa02b7f08 [fcoe]
#18 [
ffff88021f007e18] process_one_work at
ffffffff8105d7ca
#19 [
ffff88021f007e68] worker_thread at
ffffffff81060513
#20 [
ffff88021f007ee8] kthread at
ffffffff810648b6
#21 [
ffff88021f007f48] kernel_thread_helper at
ffffffff813c40f4
Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck [Thu, 10 Nov 2011 09:09:17 +0000 (09:09 +0000)]
ixgbe: Fix broken dependency on MAX_SKB_FRAGS being related to page size
This patch fixes an issue in which RSC will generate corrupted frames when
PAGE_SIZE is larger than 8K. Specifically it looks like that in 2.6.39 a
change was made so that GRO would always have at least 16 frags available
for coalescing, but the ixgbe RSC logic was not updated. As such the RSC
feature would generate a frame larger than 64K and then overflow the value
in the IP length field.
To correct that I am now basing things on the PAGE_SIZE.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Wed, 25 Jan 2012 07:59:37 +0000 (07:59 +0000)]
ixgbe: Fix case of Tx Hang in PF with 32 VFs
A check for the number of VFs allocated should have used a greater than
equal operator instead of just greater than. This caused allocation of
exactly 32 VFs to not enable the PF transmit and receive enables.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Robert E Garrett <robertX.e.garrett@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
projects / openwrt / staging / blogic.git / log