Ingo Molnar [Wed, 28 Jan 2009 04:08:44 +0000 (05:08 +0100)]
x86: rename ->ESR_DISABLE to ->disable_esr
the ->ESR_DISABLE shouting variant was used to enable the esr_disable
macro wrappers. Those ugly macros are removed now so we can rename
->ESR_DISABLE to ->disable_esr
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 04:01:41 +0000 (05:01 +0100)]
x86: clean up esr_disable() methods
Impact: cleanup
Most subarchitectures want to disable the APIC ESR (Error Status Register),
because they generally have hardware hacks that wrap standard CPUs into
a bigger system and hence the APIC bus is quite non-standard and weirdnesses
(lockups) have been seen with ESR reporting.
Remove the esr_disable macros and put the desired flag into each
subarchitecture's genapic template directly.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:32:51 +0000 (04:32 +0100)]
x86, apic: clean up / remove TARGET_CPUS
Impact: cleanup
use apic->target_cpus() directly instead of the TARGET_CPUS wrapper.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:30:40 +0000 (04:30 +0100)]
x86, apic: clean up target_cpus methods
Impact: cleanup
Clean up all the target_cpus() namespace overlap that exists
between bigsmp, es7000, mach-default, numaq and summit - by
separating the different functions into different names.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:24:16 +0000 (04:24 +0100)]
x86, apic: remove IRQ_DEST_MODE
Remove leftover definition.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:16:01 +0000 (04:16 +0100)]
x86, apic: remove ES7000_IRQ_DELIVERY_MODE and ES7000_IRQ_DEST_MODE
Impact: cleanup
They were only used in a single place and obscured the apic_es7000
driver template.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:16:01 +0000 (04:16 +0100)]
x86, apic: remove BIGSMP_IRQ_DELIVERY_MODE and BIGSMP_IRQ_DEST_MODE
Impact: cleanup
They were only used in a single place and obscured the apic_bigsmp
driver template.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:16:01 +0000 (04:16 +0100)]
x86, apic: remove NUMAQ_IRQ_DELIVERY_MODE and NUMAQ_IRQ_DEST_MODE
Impact: cleanup
They were only used in a single place and obscured the apic_numaq template.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:16:01 +0000 (04:16 +0100)]
x86, apic: remove SUMMIT_IRQ_DELIVERY_MODE and SUMMIT_IRQ_DEST_MODE
Impact: cleanup
They were only used in a single place and obscured the apic_summit template.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:16:01 +0000 (04:16 +0100)]
x86, apic: remove DEFAULT_IRQ_DELIVERY_MODE and DEFAULT_IRQ_DEST_MODE
Impact: cleanup
They were only used in a single place and obscured the apic_default template.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:09:58 +0000 (04:09 +0100)]
x86, apic: remove IRQ_DEST_MODE / IRQ_DELIVERY_MODE
Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE.
The typical 32-bit and the 64-bit build all dereference via the genapic,
so it's pointless to hide that indirection via these ugly macros.
Furthermore, it also obscures subarchitecture details.
So replace it with apic->irq_dest_mode / etc. accesses.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 03:02:31 +0000 (04:02 +0100)]
x86, genapic: rename int_delivery_mode, et. al.
int_delivery_mode is supposed to mean 'interrupt delivery mode', but
it's quite a misnomer as 'int' we usually think of as an integer type ...
The standard naming for such attributes is 'irq' - so rename the following
fields and macros:
int_delivery_mode => irq_delivery_mode
INT_DELIVERY_MODE => IRQ_DELIVERY_MODE
int_dest_mode => irq_dest_mode
INT_DEST_MODE => IRQ_DEST_MODE
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:43:47 +0000 (03:43 +0100)]
x86: clean up apic->apic_id_registered() methods
Impact: cleanup
x86 subarchitectures each defined a "apic_id_registered()" method,
which could be an inline function depending on which subarch we build
for, and which was also the name of a genapic field.
Untangle this namespace spaghetti by giving each of the instances
a separate name.
Also remove wrapper macro obfuscation.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:43:47 +0000 (03:43 +0100)]
x86: clean up apic->acpi_madt_oem_check methods
Impact: refactor code
x86 subarchitectures each defined a "acpi_madt_oem_check()" method,
which could be an inline function, or an extern, or a static function,
and which was also the name of a genapic field.
Untangle this namespace spaghetti by setting ->acpi_madt_oem_check()
to NULL on those subarchitectures that have no detection quirks,
and rename the other ones (summit, es7000) that do.
Also change default_acpi_madt_oem_check() to handle NULL entries,
and clean its control flow up as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:18:13 +0000 (03:18 +0100)]
x86: remove APIC_INIT / APICFUNC / IPIFUNC
The APIC_INIT() / APICFUNC / IPIFUNC macros were ugly and obfuscated
the true identity of various APIC driver methods.
Now that they are not used anymore, remove them.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:32:03 +0000 (03:32 +0100)]
x86, genapic: cleanup 32-bit apic_summit template
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:32:03 +0000 (03:32 +0100)]
x86, genapic: cleanup 32-bit apic_es7000 template
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:32:03 +0000 (03:32 +0100)]
x86, genapic: cleanup 32-bit apic_numaq template
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:32:03 +0000 (03:32 +0100)]
x86, genapic: cleanup 32-bit apic_bigsmp template
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 02:32:03 +0000 (03:32 +0100)]
x86, genapic: cleanup 32-bit apic_default template
Clean up the APIC driver template:
- order fields properly
- use the macro names explicitly (so that they can be renamed later)
- fill in NULL entries as well
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 01:37:01 +0000 (02:37 +0100)]
x86: clean up apic_x2apic_cluster
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 01:37:01 +0000 (02:37 +0100)]
x86: clean up apic_x2apic_phys
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 01:37:01 +0000 (02:37 +0100)]
x86: clean up apic_x2apic_uv_x
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 01:37:01 +0000 (02:37 +0100)]
x86: clean up genapic_phys_flat
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 01:37:01 +0000 (02:37 +0100)]
x86: clean up genapic_flat
- reorder fields so that they appear in struct genapic field ordering
- add zero-initialized fields too so that it's apparent which functionality
is default / missing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 23:14:11 +0000 (00:14 +0100)]
x86: rename 'genapic' to 'apic'
Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 22:54:23 +0000 (23:54 +0100)]
x86, genapic: provide IPI callbacks unconditionally
64-bit x86 uses the IPI callbacks even on UP - so provide them
generally.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 22:23:22 +0000 (23:23 +0100)]
x86, genapic: cleanups
Unify genapic.h some more.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 22:15:06 +0000 (23:15 +0100)]
x86, genapic: finish unification
Unify remaining bits of genapic_32/64.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 22:12:02 +0000 (23:12 +0100)]
x86, genapic: unify struct genapic
Move over the (now identical) struct genapic definitions from
genapic_32/64.h to genapic.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 22:07:42 +0000 (23:07 +0100)]
x86, genapic: refactor genapic_32.h
Impact: pre unification cleanup
Make genapic_32.h similar to genapic_64.h: reorder fields, unify types
and bring in new entries.
No existing functionality is affected.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Tue, 27 Jan 2009 22:07:42 +0000 (23:07 +0100)]
x86, genapic: refactor genapic_64.h
Impact: pre unification cleanup
Make genapic_64.h similar to genapic_32.h: reorder fields, unify types
and bring in new entries.
No existing functionality is affected.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Wed, 28 Jan 2009 22:13:53 +0000 (23:13 +0100)]
Merge branches 'x86/asm', 'x86/cleanups', 'x86/cpudetect', 'x86/debug', 'x86/doc', 'x86/header-fixes', 'x86/mm', 'x86/paravirt', 'x86/pat', 'x86/setup-v2', 'x86/subarch', 'x86/uaccess' and 'x86/urgent' into x86/core
Ingo Molnar [Wed, 28 Jan 2009 22:12:55 +0000 (23:12 +0100)]
Merge branch 'core/percpu' into x86/core
Conflicts:
kernel/irq/handle.c
Linus Torvalds [Wed, 28 Jan 2009 18:49:30 +0000 (10:49 -0800)]
Linux 2.6.29-rc3
Linus Torvalds [Wed, 28 Jan 2009 17:01:42 +0000 (09:01 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
powerpc/pseries: Correct VIO bus accounting problem in CMO env.
powerpc: More printing warning fixes for the l64 to ll64 conversion
powerpc: Remove arch/ppc cruft from Kconfig
powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
powerpc/embedded6xx: Update defconfigs
powerpc/8xx: Update defconfigs
powerpc/86xx: Update defconfigs
powerpc/83xx: Update defconfigs
powerpc/85xx: Update defconfigs
powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed
powerpc/4xx: Update multi-board PowerPC 4xx defconfigs
powerpc/44x: Update PowerPC 44x defconfigs
powerpc/40x: Update PowerPC 40x defconfigs
powerpc/85xx: Fix typo in mpc8572ds dts
powerpc/44x: Warp patches for the new NDFC driver
powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
Linus Torvalds [Wed, 28 Jan 2009 16:41:57 +0000 (08:41 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 5329 ColdFire periphal addressing
uclinux: add process name to allocation error message
m68knommu: correct the mii calculations for 532x ColdFire FEC
m68knommu: add ColdFire M532x to the FEC configuration options
m68knommu: fix syscall restarting
m68knommu: remove the obsolete and long unused comempci chip support
m68knommu: remove the no longer used PCI support option
m68knommu: remove obsolete and unused eLIA board
m68knommu: set NO_DMA
m68knommu: fix cache flushing for the 527x ColdFire processors
m68knommu: fix ColdFire 5272 serial baud rates in mcf.c
m68knommu: use one exist from execption
Kumar Gala [Wed, 28 Jan 2009 06:07:20 +0000 (00:07 -0600)]
dmi: Fix build breakage
Commit
d7b1956fed33d30c4815e848fd7a143722916868 ("DMI: Introduce
dmi_first_match to make the interface more flexible") introduced compile
errors like the following when !CONFIG_DMI
drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff':
drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match'
drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast
We just need a dummy version of dmi_first_match() to fix this all up.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Anholt [Wed, 28 Jan 2009 05:19:41 +0000 (21:19 -0800)]
drm: Rip out the racy, unused vblank signal code.
Schedule a vblank signal, kill the process, and we'll go walking over freed
memory. Given that no open-source userland exists using this, nor have I
ever heard of a consumer, just let this code die.
Signed-off-by: Eric Anholt <eric@anholt.net>
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gerhard Pircher [Fri, 23 Jan 2009 06:51:28 +0000 (06:51 +0000)]
powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code
_PAGE_COHERENT is now always set in _PAGE_RAM resp. PAGE_KERNEL.
Thus it has to be masked out, if the BAT mapping should be non
cacheable or CPU_FTR_NEED_COHERENT is not set.
This will work on normal SMP setups because we force-set
CPU_FTR_NEED_COHERENT as part of CPU_FTR_COMMON on SMP.
Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Robert Jennings [Thu, 22 Jan 2009 09:40:00 +0000 (09:40 +0000)]
powerpc/pseries: Correct VIO bus accounting problem in CMO env.
In the VIO bus code the wrappers for dma alloc_coherent and free_coherent
calls are rounding to IOMMU_PAGE_SIZE. Taking a look at the underlying
calls, the actual mapping is promoted to PAGE_SIZE. Changing the
rounding in these two functions fixes under-reporting the entitlement
used by the system. Without this change, the system could run out of
entitlement before it believes it has and incur mapping failures at the
firmware level.
Also in the VIO bus code, the wrapper for dma map_sg is not exiting in
an error path where it should. Rather than fall through to code for the
success case, this patch adds the return that is needed in the error path.
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Stephen Rothwell [Wed, 21 Jan 2009 13:16:28 +0000 (13:16 +0000)]
powerpc: More printing warning fixes for the l64 to ll64 conversion
These are all powerpc specific drivers.
res.start in fsl_elbc_nand.c needs to be cast since it may be either 32
or 64 bit. Thanks to Scott Wood for noticing.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular
Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices
Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Josh Boyer [Tue, 20 Jan 2009 05:16:36 +0000 (05:16 +0000)]
powerpc: Remove arch/ppc cruft from Kconfig
Remove some leftover cruft from the arch/ppc days
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Stephen Rothwell [Sun, 18 Jan 2009 23:33:38 +0000 (23:33 +0000)]
powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Benjamin Herrenschmidt [Wed, 28 Jan 2009 06:15:34 +0000 (17:15 +1100)]
Merge commit 'jwb/jwb-merge' into merge
Manual merge of:
arch/powerpc/configs/44x/warp_defconfig
Benjamin Herrenschmidt [Wed, 28 Jan 2009 06:14:54 +0000 (17:14 +1100)]
Merge commit 'kumar/kumar-merge' into merge
Casey Schaufler [Wed, 28 Jan 2009 03:56:30 +0000 (19:56 -0800)]
smackfs load append mode fix
Given just how hard it is to find the code that uses MAY_APPEND
it's probably not a big surprise that this went unnoticed for so
long. The Smack rules loading code is incorrectly setting the
MAY_READ bit when MAY_APPEND is requested.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 28 Jan 2009 00:08:04 +0000 (16:08 -0800)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (36 commits)
USB: Driver for Freescale QUICC Engine USB Host Controller
USB: option: add QUANTA HSDPA Data Card device ids
USB: storage: Add another unusual_dev for off-by-one bug
USB: unusual_dev: usb-storage needs to ignore a device
USB: GADGET: fix !x & y
USB: new id for ti_usb_3410_5052 driver
USB: cdc-acm: Add another conexant modem to the quirks
USB: 'option' driver - onda device MT503HS has wrong id
USB: Remove ZTE modem from unusual_devices
USB: storage: support of Dane-Elec MediaTouch USB device
USB: usbmon: Implement compat_ioctl
USB: add kernel-doc for wusb_dev in struct usb_device
USB: ftdi_sio driver support of bar code scanner from Diebold
USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID
USB: cp2101 device
USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440
USB: remove vernier labpro from ldusb
USB: CDC-ACM quirk for MTK GPS
USB: cdc-acm: support some gps data loggers
USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index
...
Anton Vorontsov [Sat, 10 Jan 2009 02:03:21 +0000 (05:03 +0300)]
USB: Driver for Freescale QUICC Engine USB Host Controller
This patch adds support for the FHCI USB controller, as found
in the Freescale MPC836x and MPC832x processors. It can support
Full or Low speed modes.
Quite a lot the hardware is doing by itself (SOF generation, CRC
generation and checking), though scheduling and retransmission is on
software's shoulders.
This controller does not integrate the root hub, so this driver also
fakes one-port hub. External hub is required to support more than
one device.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alex.Cheng@quantatw.com [Thu, 22 Jan 2009 08:01:57 +0000 (16:01 +0800)]
USB: option: add QUANTA HSDPA Data Card device ids
This patch adds the support for the QUANTA Q101 series HSDPA Data Card.
With the vendor and product IDs are set properly,
the data card can be detected and works fine.
Signed-off-by: Alex Cheng <alex.cheng@quantatw.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Phil Dibowitz [Tue, 20 Jan 2009 22:42:52 +0000 (23:42 +0100)]
USB: storage: Add another unusual_dev for off-by-one bug
Argosy has released another device with the off-by-one sector. This is a
harddrive with an internal cardreader which is affected.
Based on a patch written by Martijn Hijdra <martijn.hijdra@gmail.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Cc: Martijn Hijdra <martijn.hijdra@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Phil Dibowitz [Tue, 20 Jan 2009 22:48:36 +0000 (23:48 +0100)]
USB: unusual_dev: usb-storage needs to ignore a device
This patch adds an unusual_devs entry for a Sony Ericsson modem. Like many
other modems, we have to ignore the storage device in order to access the
modem.
At this time usb_modeswitch does not work with this device.
Reported-by: The Solutor <thesolutor@gmail.com>.
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roel Kluin [Sat, 17 Jan 2009 15:52:17 +0000 (16:52 +0100)]
USB: GADGET: fix !x & y
! has a higher precedence than &
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Mon, 12 Jan 2009 12:31:16 +0000 (13:31 +0100)]
USB: new id for ti_usb_3410_5052 driver
This adds a new device id
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Cox [Sun, 11 Jan 2009 19:53:10 +0000 (19:53 +0000)]
USB: cdc-acm: Add another conexant modem to the quirks
Another Conexant, another device with the same quirk
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marcel Sebek [Sun, 28 Dec 2008 13:06:50 +0000 (14:06 +0100)]
USB: 'option' driver - onda device MT503HS has wrong id
While trying to make GSM modem Onda MT503HS working, I found a mismatch
between device id in the driver code (0x0200) and id in the lsusb
output (0x2000).
This patch fixed it for me, but I don't know if the original device id was
also correct and the new ID should be added instead of replacing the
old one.
Signed-off-by: Marcel Sebek <sebek64@post.cz>
Acked-by: Domenico Riccio <domenico.riccio@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Phil Dibowitz [Sun, 11 Jan 2009 17:46:20 +0000 (18:46 +0100)]
USB: Remove ZTE modem from unusual_devices
The ZTE modem entry causes usb-storage to ignore the device, but for some
versions of the device, usb-storage mode is required to get to modem ode. For
both kinds the tool: http://www.draisberghof.de/usb_modeswitch/ should work.
Note that the various versions of the device have the same ProductId,
VendorId, and bcdDevice number, so we cannot have the entry for some and not
others.
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jean-Baptiste Onofre [Sat, 20 Dec 2008 19:11:55 +0000 (20:11 +0100)]
USB: storage: support of Dane-Elec MediaTouch USB device
This adds another unusual_devs.h entry for a device that can't handle more
than 64k reads/writes in a single command.
Signed-off-by: Jean-Baptiste Onofre <jb@nanthrax.net>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pete Zaitcev [Sat, 20 Dec 2008 19:56:08 +0000 (12:56 -0700)]
USB: usbmon: Implement compat_ioctl
Running a 32-bit usbmon(8) on 2.6.28-rc9 produces the following:
ioctl32(usbmon:28563): Unknown cmd fd(3) cmd(
400c9206){t:
ffffff92;sz:12} arg(
ffd3f458) on /dev/usbmon0
It happens because the compatibility mode was implemented for 2.6.18
and not updated for the fsops.compat_ioctl API.
This patch relocates the pieces from under #ifdef CONFIG_COMPAT into
compat_ioctl with no other changes except one new whitespace.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Inaky Perez-Gonzalez [Thu, 8 Jan 2009 20:52:19 +0000 (12:52 -0800)]
USB: add kernel-doc for wusb_dev in struct usb_device
Reported by Randy Dunlap from a warning on the v2.6.29 merge window.
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mhayk Whandson [Fri, 9 Jan 2009 10:48:16 +0000 (06:48 -0400)]
USB: ftdi_sio driver support of bar code scanner from Diebold
Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil.
Signed-off-by: Mhayk Whandson <eu@mhayk.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Robie Basak [Mon, 12 Jan 2009 23:05:59 +0000 (23:05 +0000)]
USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID
This patch adds the vendor and product ID for the Alti-2 Neptune 3
(http://www.alti-2.com) which uses the FTDI chip.
Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomasz K [Sun, 4 Jan 2009 11:47:11 +0000 (12:47 +0100)]
USB: cp2101 device
My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider,
PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c
From: Tomasz K <eros81@o2.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brandon Philips [Mon, 5 Jan 2009 16:30:39 +0000 (08:30 -0800)]
USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440
My Brother HL-1440 would print one document before CUPS would stop
printing with the error "Printer not connected; will retry in 30
seconds...". I traced this down to the CUPS usb backend getting an EIO
out of usblp on the IOCNR_GET_DEVICE_ID IOCTL. Adding the
USBLP_QUIRK_BIDIR fixes the problem but is it the right solution?
output from strace /usr/lib/cups/backend/usb after printing a document
(Note: SNDCTL_DSP_SYNC == IOCNR_GET_DEVICE_ID):
before patch
open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3
ioctl(3, SNDCTL_DSP_SYNC, 0x7fff2478cef0) = -1 EIO (Input/output error)
after patch
open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3
ioctl(3, SNDCTL_DSP_SYNC, 0x7fffb8d474c0) = 0
Possibly related bug: https://bugs.launchpad.net/ubuntu/+source/cupsys/+bug/35638
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sware [Wed, 7 Jan 2009 23:35:55 +0000 (15:35 -0800)]
USB: remove vernier labpro from ldusb
Labpro device is in both ldusb and vstusb device tables.
Should only be a vstusb device.
Signed-off-by: stephen ware <stephen.ware@eqware.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew Lunn [Tue, 23 Dec 2008 16:31:23 +0000 (17:31 +0100)]
USB: CDC-ACM quirk for MTK GPS
This patch adds a device quirk for a MediaTek Inc GPS chipset. The
device implements USB CDC ACM, but is missing the union descriptor, so
the ACM class driver fails to probe the device.
I've tested this patch with an iBlue A+ GPS which uses this chipset
and using kernel 2.6.28-rc9.
Signed-off-by: Andrew Lunn, <andrew@lunn.ch>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
James A. Treacy [Sun, 25 Jan 2009 04:37:43 +0000 (23:37 -0500)]
USB: cdc-acm: support some gps data loggers
Below is a patch which allows a number of GPS loggers to work
under linux. It is known to support the i-Blue 747 (all models),
i-Blue 757, Qstarz BT-Q1000, i.Trek Z1, Konet BGL-32, and the Holux
M-241.
From: James A. Treacy <treacy@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Wu [Wed, 7 Jan 2009 16:21:19 +0000 (00:21 +0800)]
USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index
In some usb gadget driver, for example usb audio class device, the high
byte of w_index is the entity id and low byte is the interface number.
If we use the 2 bytes of w_index as the array number, we will get a
wrong pointer or NULL pointer.
This patch fixes this issue.
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Bryan Wu [Wed, 7 Jan 2009 16:21:18 +0000 (00:21 +0800)]
USB: composite: Fix bug: should test set_alt function pointer before use it
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Mon, 26 Jan 2009 10:05:43 +0000 (02:05 -0800)]
USB: musb: Kconfig fix
The Blackfin MUSB Kconfig text didn't properly parenthesise its
dependencies. This was visible in non-Blackfin configs by the
way the user interfaces lost track of dependencies, when doing
a bunch of test builds.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Swaminathan S [Sun, 25 Jan 2009 01:57:37 +0000 (17:57 -0800)]
USB: musb cppi dma fix
Initializes the actual_len field to 0 before every DMA transaction.
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hugo Villeneuve [Sun, 25 Jan 2009 01:57:30 +0000 (17:57 -0800)]
USB: musb cppi bugfixes
These compilation errors are related to incorrect
debugging macro and variable names and generated the
following errors:
drivers/usb/musb/cppi_dma.c:437:5: warning: "MUSB_DEBUG" is not defined
drivers/usb/musb/cppi_dma.c: In function 'cppi_next_rx_segment':
drivers/usb/musb/cppi_dma.c:884: error: 'debug' undeclared (first use in this function)
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Julia Lawall [Sun, 25 Jan 2009 01:57:24 +0000 (17:57 -0800)]
USB: musb uses endpoint functions
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kalle Valo [Sun, 25 Jan 2009 01:57:15 +0000 (17:57 -0800)]
USB: musb: tusb6010 buildfix
drivers/usb/musb/tusb6010_omap.c:18:26: error: asm/arch/dma.h:
No such file or directory
drivers/usb/musb/tusb6010_omap.c:19:26: error: asm/arch/mux.h:
No such file or directory
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Ajay Kumar Gupta [Sun, 25 Jan 2009 01:56:39 +0000 (17:56 -0800)]
USB: musb free_irq bugfix
Fixes insert module failure as free_irq() was not
done in previous rmmod.
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 25 Jan 2009 01:56:25 +0000 (17:56 -0800)]
USB: musb_hdrc: another davinci buildfix (otg related)
The DaVinci code had an implementation of the OTG transceiver glue
too; make it use the new-standard one.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 25 Jan 2009 01:56:17 +0000 (17:56 -0800)]
USB: musb davinci buildfix
Trying once more to get this merged. The original was submitted
for 2.6.27-rc2 or so, and never got correctly merged. Neither
were any of the numerous subsequent resends. Sigh.
CC drivers/usb/musb/davinci.o
drivers/usb/musb/davinci.c:35:32: error: mach/arch/hardware.h: No such file or directory
drivers/usb/musb/davinci.c:36:30: error: mach/arch/memory.h: No such file or directory
drivers/usb/musb/davinci.c:37:28: error: mach/arch/gpio.h: No such file or directory
drivers/usb/musb/davinci.c:373: error: redefinition of 'musb_platform_set_mode'
drivers/usb/musb/davinci.c:368: error: previous definition of 'musb_platform_set_mode' was here
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David Brownell [Sun, 25 Jan 2009 01:55:57 +0000 (17:55 -0800)]
USB: omap1 ohci buildfix (otg related)
> > drivers/built-in.o: In function `ohci_omap_init':
> > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver'
> > drivers/built-in.o: In function `omap_udc_probe':
> > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver'
> > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver'
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 13 Jan 2009 16:33:42 +0000 (11:33 -0500)]
USB: fix char-device disconnect handling
This patch (as1198) fixes a conceptual bug: Somewhere along the line
we managed to confuse USB class devices with USB char devices. As a
result, the code to send a disconnect signal to userspace would not be
built if both CONFIG_USB_DEVICE_CLASS and CONFIG_USB_DEVICEFS were
disabled.
The usb_fs_classdev_common_remove() routine has been renamed to
usbdev_remove() and it is now called whenever any USB device is
removed, not just when a class device is unregistered. The notifier
registration and unregistration calls are no longer conditionally
compiled. And since the common removal code will always be called as
part of the char device interface, there's no need to call it again as
part of the usbfs interface; thus the invocation of
usb_fs_classdev_common_remove() has been taken out of
usbfs_remove_device().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
Tested-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: stable <stable@kernel.org>
Rafael J. Wysocki [Tue, 20 Jan 2009 00:26:56 +0000 (01:26 +0100)]
USB: Fix suspend-resume of PCI USB controllers
Commit
a0d4922da2e4ccb0973095d8d29f36f6b1b5f703
(USB: fix up suspend and resume for PCI host controllers) attempted
to fix the suspend-resume of PCI USB controllers, but unfortunately
it did that incorrectly and interrupts are left enabled by the USB
controllers' ->suspend_late() callback as a result. This leads to
serious problems during suspend which are very difficult to debug.
Fix the issue by removing the ->suspend_late() callback of PCI
USB controllers and moving the code from there to the ->suspend()
callback executed with interrupts enabled. Additionally, make
the ->resume() callback of PCI USB controllers execute
pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the
full power state (PCI_D0).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Andrey Borzenkov <arvidjaar@mail.ru>
Tested-by: "Jeff Chua" <jeff.chua.linux@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Tue, 13 Jan 2009 16:35:54 +0000 (11:35 -0500)]
USB: don't enable wakeup by default for PCI host controllers
This patch (as1199) changes the initial wakeup settings for PCI USB
host controllers. The controllers are marked as capable of waking the
system, but wakeup is not enabled by default.
It turns out that enabling wakeup for USB host controllers has a lot
of bad consequences. As the simplest example, if a USB mouse or
keyboard is unplugged immediately after the computer is put to sleep,
the unplug will cause the system to wake back up again! We are better
off marking them as wakeup-capable and leaving wakeup disabled.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
CC: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Oliver Neukum [Wed, 14 Jan 2009 15:17:19 +0000 (16:17 +0100)]
USB: storage: add unusual devs entry
This adds an unusual devs entry for 2116:0320
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Thu, 15 Jan 2009 22:03:33 +0000 (17:03 -0500)]
USB: fix toggle mismatch in disable_endpoint paths
This patch (as1200) finishes some fixes that were left incomplete by
an earlier patch.
Although nobody has addressed this issue in the past, it turns out
that we need to distinguish between two different modes of disabling
and enabling endpoints. In one mode only the data structures in
usbcore are affected, and in the other mode the host controller and
device hardware states are affected as well.
The earlier patch added an extra argument to the routines in the
enable_endpoint pathways to reflect this difference. This patch adds
corresponding arguments to the disable_endpoint pathways. Without
this change, the endpoint toggle state can get out of sync between
the host and the device. The exact mechanism depends on the details
of the host controller (whether or not it stores its own copy of the
toggle values).
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Dan Streetman <ddstreet@ieee.org>
Tested-by: Dan Streetman <ddstreet@ieee.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wolfgang Glas [Thu, 15 Jan 2009 22:11:53 +0000 (23:11 +0100)]
USB: cp2101: add fasttrax GPS evaluation kit vendor/product ID
This adds the vendor/product ID of the fasttrax GPS evaluation kit from:
http://www.fastraxgps.com/products/evaluationtools/evaluationkit/
to the cp2101 module since this device is actually equipped with a
CP210x USB to serial bridge.
The vendor/product ID is: 0x10c4/0x826b.
Signed-off-by: Wolfgang Glas <wolfgang.glas@ev-i.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Torvalds [Wed, 28 Jan 2009 00:07:44 +0000 (16:07 -0800)]
Merge branch 'for-2.6.29' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.29' of git://linux-nfs.org/~bfields/linux:
nfsd: only set file_lock.fl_lmops in nfsd4_lockt if a stateowner is found
nfsd: fix cred leak on every rpc
nfsd: fix null dereference on error path
nfs: note that CONFIG_SUNRPC_XPRT_RDMA turns on server side support too
update port number in NFS/RDMA documentation
Linus Torvalds [Wed, 28 Jan 2009 00:07:24 +0000 (16:07 -0800)]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] ibmvfc: Fix DMA mapping leak on memory allocation failure
[SCSI] qla2xxx: Update version number to 8.03.00-k2.
[SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks.
[SCSI] qla2xxx: Correct regression in DMA-mask setting prior to allocations.
[SCSI] qla2xxx: Correct descriptions in flash manipulation routines.
[SCSI] qla2xxx: Correct regression in EH abort handling.
[SCSI] qla2xxx: Correct endianness issue during flash manipulation.
[SCSI] qla2xxx: Correct MSI-X vector allocation for single queue mode.
[SCSI] qla2xxx: Modify firmware-load order precedence for ISP81XX parts.
[SCSI] qla2xxx: Always serialize mailbox command execution.
[SCSI] qla2xxx: Ensure RISC-interrupt-enabled consistency for IS_NOPOLLING_TYPE() ISPs.
[SCSI] qla2xxx: Simplify sector-mask calculation in preparation for larger flash parts.
[SCSI] qla2xxx: Fix memory leak in error path
[SCSI] qla4xxx: do not reuse session when connecting to different target port
[SCSI] libiscsi: fix iscsi pool leak
David Daney [Tue, 27 Jan 2009 17:53:22 +0000 (09:53 -0800)]
cpumask fallout: Initialize irq_default_affinity earlier
Move the initialization of irq_default_affinity to early_irq_init as
core_initcall is too late.
irq_default_affinity can be used in init_IRQ and potentially timer and
SMP init as well. All of these happen before core_initcall. Moving
the initialization to early_irq_init ensures that it is initialized
before it is used.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Mike Travis <travis@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Daney [Tue, 27 Jan 2009 17:53:21 +0000 (09:53 -0800)]
Make irq_*_affinity depend on CONFIG_GENERIC_HARDIRQS too.
In interrupt.h these functions are declared only if
CONFIG_GENERIC_HARDIRQS is set. We should define them under identical
conditions.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 21 Jan 2009 22:58:36 +0000 (01:58 +0300)]
Fix longstanding "error: storage size of '__mod_dmi_device_table' isn't known"
gcc 3.4.6 doesn't like MODULE_DEVICE_TABLE(dmi, x) expansion enough to
error out. Shut it up in a most simple way.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Tue, 27 Jan 2009 20:41:34 +0000 (21:41 +0100)]
x86: cpu_init(): remove ugly #ifdef construct around debug register clear
Impact: Cleanup
While I was looking through the new and improved bootstrap code - great
work that, thanks! I found the below a slight improvement.
Remove unnecessary ugly #ifdef construct around debug register clear.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Andreas Schwab [Tue, 27 Jan 2009 20:45:57 +0000 (21:45 +0100)]
x86 setup: fix asm constraints in vesa_store_edid
Impact: fix potential miscompile (currently believed non-manifest)
As the comment explains, the VBE DDC call can clobber any register.
Tell the compiler about that fact.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Jeff Layton [Thu, 22 Jan 2009 19:16:04 +0000 (14:16 -0500)]
nfsd: only set file_lock.fl_lmops in nfsd4_lockt if a stateowner is found
nfsd4_lockt does a search for a lockstateowner when building the lock
struct to test. If one is found, it'll set fl_owner to it. Regardless of
whether that happens, it'll also set fl_lmops. Given that this lock is
basically a "lightweight" lock that's just used for checking conflicts,
setting fl_lmops is probably not appropriate for it.
This behavior exposed a bug in DLM's GETLK implementation where it
wasn't clearing out the fields in the file_lock before filling in
conflicting lock info. While we were able to fix this in DLM, it
still seems pointless and dangerous to set the fl_lmops this way
when we may have a NULL lockstateowner.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@pig.fieldses.org>
J. Bruce Fields [Wed, 21 Jan 2009 00:34:22 +0000 (19:34 -0500)]
nfsd: fix cred leak on every rpc
Since override_creds() took its own reference on new, we need to release
our own reference.
(Note the put_cred on the return value puts the *old* value of
current->creds, not the new passed-in value).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Wed, 21 Jan 2009 00:32:59 +0000 (19:32 -0500)]
nfsd: fix null dereference on error path
We're forgetting to check the return value from groups_alloc().
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
J. Bruce Fields [Sun, 2 Nov 2008 21:18:08 +0000 (16:18 -0500)]
nfs: note that CONFIG_SUNRPC_XPRT_RDMA turns on server side support too
We forgot to update this when adding server-side support.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
James Lentini [Thu, 8 Jan 2009 18:13:26 +0000 (13:13 -0500)]
update port number in NFS/RDMA documentation
Update the NFS/RDMA documentation to use the new port number assigned
by IANA.
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Linus Torvalds [Tue, 27 Jan 2009 15:50:41 +0000 (07:50 -0800)]
Merge branch 'hibern_fixes' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'hibern_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
SATA PIIX: Blacklist system that spins off disks during ACPI power off
SATA Sil: Blacklist system that spins off disks during ACPI power off
SATA AHCI: Blacklist system that spins off disks during ACPI power off
SATA: Blacklisting of systems that spin off disks during ACPI power off
DMI: Introduce dmi_first_match to make the interface more flexible
Hibernation: Introduce system_entering_hibernation
Linus Torvalds [Tue, 27 Jan 2009 15:47:22 +0000 (07:47 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
pata-rb532-cf: remove set_irq_type from finish_io
[libata] pata_via: support VX855, future chips whose IDE controller use 0x0571
sata_mv: no longer experimental (v2)
sata_mv: msi masking fix (v2)
sata_mv: Properly initialize main irq mask
sata_mv: remove bogus nsect restriction
sata_mv: don't read hc_irq_cause
sata_mv: fix 8-port timeouts on 508x/6081 chips
sata_nv: fix MCP5x reset
sata_nv: rename nv_nf2_hardreset()
libata: set NODEV_HINT for 0x7f status
libata-sff: fix incorrect EH message
Linus Torvalds [Tue, 27 Jan 2009 15:46:29 +0000 (07:46 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccm - Fix handling of null assoc data
crypto: blkcipher - Fix WARN_ON handling in walk_done
crypto: authenc - Fix zero-length IV crash
Michael Bramer [Tue, 27 Jan 2009 11:51:16 +0000 (11:51 +0000)]
Add support for '8-port RS-232 MIC-3620 from advantech'
This Patch add the device information for the
MIC-3620 8-port RS-232 cPCI card from Advantech Co. Ltd.
Signed-off-by: Michael Bramer <grisu@deb-support.de>
Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / openwrt / staging / blogic.git / log