openwrt/staging/dedeckeh.git
11 years agofirewall3: add wan6 interface to wan-zone by default
Steven Barth [Mon, 13 May 2013 17:12:15 +0000 (17:12 +0000)]
firewall3: add wan6 interface to wan-zone by default

SVN-Revision: 36623

11 years agofirewall: Remove obsoleted ULA-border rule
Steven Barth [Mon, 13 May 2013 17:12:10 +0000 (17:12 +0000)]
firewall: Remove obsoleted ULA-border rule

SVN-Revision: 36622

11 years agovalgrind: do not depend on a particular ARM target, depend on the arch level
Felix Fietkau [Mon, 13 May 2013 15:05:03 +0000 (15:05 +0000)]
valgrind: do not depend on a particular ARM target, depend on the arch level

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36621

11 years agobuild: add config symbols for different ARM arch levels
Felix Fietkau [Mon, 13 May 2013 15:04:58 +0000 (15:04 +0000)]
build: add config symbols for different ARM arch levels

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36620

11 years agokernel: move CONFIG_MIPS_SEAD3 to generic
Jonas Gorski [Sun, 12 May 2013 21:41:55 +0000 (21:41 +0000)]
kernel: move CONFIG_MIPS_SEAD3 to generic

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617

11 years agobcm63xx: don't build CRAMFS
Jonas Gorski [Sun, 12 May 2013 21:41:52 +0000 (21:41 +0000)]
bcm63xx: don't build CRAMFS

Don't build the CRAMFS file system module in the kernel, and save some bytes.

No bcm63xx board needs this obsolete file system, neither those ones using
the Redboot bootloader (liveboxes). Thus, there is no need to build it, since it has
been replaced long time ago by squashfs.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36616

11 years agoled and buttons support for board DWV-S0
Jonas Gorski [Sun, 12 May 2013 21:41:50 +0000 (21:41 +0000)]
led and buttons support for board DWV-S0

Signed-off-by: Gianluca Agliozzo <gianluca05@hotmail.it>
[jogo@openwrt.org: fixup patch so it actually applies]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36615

11 years agobcm63xx: remove defconfig support
Jonas Gorski [Sun, 12 May 2013 11:54:38 +0000 (11:54 +0000)]
bcm63xx: remove defconfig support

All boards use uci-defaults, no need to keep defconfig support.

SVN-Revision: 36610

11 years agokernel: fix CVE-2013-1763 in older kernels
Jonas Gorski [Sun, 12 May 2013 10:55:12 +0000 (10:55 +0000)]
kernel: fix CVE-2013-1763 in older kernels

Newer kernels were already fixed by upstream.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36607

11 years ago6rd: increase metric of default route
Steven Barth [Sun, 12 May 2013 08:07:15 +0000 (08:07 +0000)]
6rd: increase metric of default route

This will prefer native IPv6 over 6rd if both are present.

SVN-Revision: 36605

11 years agoiwinfo: only consider joined bss when finding current operating frequency, fixes...
Jo-Philipp Wich [Sun, 12 May 2013 01:12:56 +0000 (01:12 +0000)]
iwinfo: only consider joined bss when finding current operating frequency, fixes spurious misreporting of frequencies in ad-hoc mode

SVN-Revision: 36604

11 years agoubus: update to the latest version, fixes a rare deadlock with multiple synchronous...
Felix Fietkau [Sat, 11 May 2013 20:42:41 +0000 (20:42 +0000)]
ubus: update to the latest version, fixes a rare deadlock with multiple synchronous invoke/notify calls

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36603

11 years agoopenssl: disable mips16, it makes the code slower
Felix Fietkau [Fri, 10 May 2013 00:18:27 +0000 (00:18 +0000)]
openssl: disable mips16, it makes the code slower

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36602

11 years agopx5g: disable assembler functions, fixes compile errors with mips16
Felix Fietkau [Thu, 9 May 2013 23:49:03 +0000 (23:49 +0000)]
px5g: disable assembler functions, fixes compile errors with mips16

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36601

11 years agoar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well...
Felix Fietkau [Thu, 9 May 2013 23:32:46 +0000 (23:32 +0000)]
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36600

11 years agoscripts/remote-gdb: add support for debugging core files
Felix Fietkau [Thu, 9 May 2013 20:50:58 +0000 (20:50 +0000)]
scripts/remote-gdb: add support for debugging core files

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36596

11 years agoscripts/remote-gdb: fix path when built for musl
Felix Fietkau [Thu, 9 May 2013 20:50:54 +0000 (20:50 +0000)]
scripts/remote-gdb: fix path when built for musl

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36595

11 years agotoolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandato...
Felix Fietkau [Thu, 9 May 2013 20:50:49 +0000 (20:50 +0000)]
toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36594

11 years agokernel: modules: kmod-fs-isofs depends on kmod-lib-zlib
Jonas Gorski [Thu, 9 May 2013 20:50:10 +0000 (20:50 +0000)]
kernel: modules: kmod-fs-isofs depends on kmod-lib-zlib

Add missing dependency. Fixes #11624.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36593

11 years agokernel: make zlib and lzo modules selectable
Jonas Gorski [Thu, 9 May 2013 20:50:07 +0000 (20:50 +0000)]
kernel: make zlib and lzo modules selectable

Fixes building kmod-lib-zlib and kmod-lib-lzo if nothing depends on them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36592

11 years agotoolchain/musl: add version 0.9.10
Felix Fietkau [Thu, 9 May 2013 20:34:21 +0000 (20:34 +0000)]
toolchain/musl: add version 0.9.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36591

11 years agotoolchain/musl: fix libstdc++ build issues
Felix Fietkau [Thu, 9 May 2013 20:02:57 +0000 (20:02 +0000)]
toolchain/musl: fix libstdc++ build issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36590

11 years agokernel: b53: use correct oops for bcm5365 switch
Hauke Mehrtens [Thu, 9 May 2013 20:01:58 +0000 (20:01 +0000)]
kernel: b53: use correct oops for bcm5365 switch

SVN-Revision: 36589

11 years agotoolchain/musl: fix build issues on mac os x
Felix Fietkau [Thu, 9 May 2013 19:26:53 +0000 (19:26 +0000)]
toolchain/musl: fix build issues on mac os x

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36588

11 years agokernel: allow building zsmalloc as a module again
Jonas Gorski [Thu, 9 May 2013 19:19:36 +0000 (19:19 +0000)]
kernel: allow building zsmalloc as a module again

zsmalloc was changed to a bool because of missing exports in the kernel,
but we already export the required symbol, so change it back to tristate.

Closes #13481.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36587

11 years agoar71xx: use combined kernel image in the CameoHornet template
Gabor Juhos [Wed, 8 May 2013 17:11:10 +0000 (17:11 +0000)]
ar71xx: use combined kernel image in the CameoHornet template

This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36584

11 years agofirmware-utils/mkcameofw: allow to use combined kernel image
Gabor Juhos [Wed, 8 May 2013 17:11:08 +0000 (17:11 +0000)]
firmware-utils/mkcameofw: allow to use combined kernel image

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36583

11 years agoar71xx: add profile and build image for the RNX-N360RT board
Gabor Juhos [Wed, 8 May 2013 17:07:19 +0000 (17:07 +0000)]
ar71xx: add profile and build image for the RNX-N360RT board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36582

11 years agoar71xx: add user-space model detection for the RNX-N360RT board
Gabor Juhos [Wed, 8 May 2013 17:07:18 +0000 (17:07 +0000)]
ar71xx: add user-space model detection for the RNX-N360RT board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36581

11 years agoar71xx: add profile and build image for Netgear WNDAP360
Gabor Juhos [Wed, 8 May 2013 17:03:43 +0000 (17:03 +0000)]
ar71xx: add profile and build image for Netgear WNDAP360

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36580

11 years agoar71xx: add user-space support for Netgear WNDAP360
Gabor Juhos [Wed, 8 May 2013 17:03:42 +0000 (17:03 +0000)]
ar71xx: add user-space support for Netgear WNDAP360

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36579

11 years agoar71xx: add kernel support for Netgear WNDAP360
Gabor Juhos [Wed, 8 May 2013 17:03:34 +0000 (17:03 +0000)]
ar71xx: add kernel support for Netgear WNDAP360

Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578

11 years agokernel: update linux 3.9 to 3.9.1
Gabor Juhos [Wed, 8 May 2013 08:53:55 +0000 (08:53 +0000)]
kernel: update linux 3.9 to 3.9.1

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36577

11 years agokernel: update linux 3.8 to 3.8.12
Gabor Juhos [Wed, 8 May 2013 08:53:53 +0000 (08:53 +0000)]
kernel: update linux 3.8 to 3.8.12

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576

11 years agoar71xx: Fix AP135 partition layout
Gabor Juhos [Wed, 8 May 2013 08:53:49 +0000 (08:53 +0000)]
ar71xx: Fix AP135 partition layout

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36575

11 years agogrub2: Add sub package grub-editenv for target installation
John Crispin [Tue, 7 May 2013 12:35:07 +0000 (12:35 +0000)]
grub2: Add sub package grub-editenv for target installation

grub-editenv allows to modify grub2 environment files. Add a new package
that build grub2 for the target and packs up grub-editenv.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 36574

11 years agolantiq: enable portmaps again and set max port to 2
John Crispin [Tue, 7 May 2013 10:58:52 +0000 (10:58 +0000)]
lantiq: enable portmaps again and set max port to 2

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36573

11 years agoramips: drop 3.7 support
John Crispin [Tue, 7 May 2013 10:58:44 +0000 (10:58 +0000)]
ramips: drop 3.7 support

Signed-off-by; John Crispin <blogic@openwrt.org>

SVN-Revision: 36572

11 years agoramips: properly setup the FEATURES variable
John Crispin [Tue, 7 May 2013 10:58:30 +0000 (10:58 +0000)]
ramips: properly setup the FEATURES variable

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36571

11 years agoadd uci support for "proxy-dnssec" in dnsmasq
Steven Barth [Tue, 7 May 2013 07:19:51 +0000 (07:19 +0000)]
add uci support for "proxy-dnssec" in dnsmasq

This patch simply adds support for the "--proxy-dnssec" command in dnsmasq into the init file so it can be used with /etc/config/dhcp.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>
SVN-Revision: 36570

11 years agoiw: update to 3.10, sync with nl80211.h changes in compat-wireless
Felix Fietkau [Mon, 6 May 2013 22:35:50 +0000 (22:35 +0000)]
iw: update to 3.10, sync with nl80211.h changes in compat-wireless

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36569

11 years agoramips: fix memory detection rt5350
John Crispin [Mon, 6 May 2013 18:23:56 +0000 (18:23 +0000)]
ramips: fix memory detection rt5350

Signed-off-by: Felix Kaechele <felix@fetzig.org>
SVN-Revision: 36568

11 years agoramips: enable dsp extensions for rt305x and rt3883
John Crispin [Mon, 6 May 2013 16:45:59 +0000 (16:45 +0000)]
ramips: enable dsp extensions for rt305x and rt3883

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36567

11 years agorules.mk: add _dsp to ARCH_SUFFIX if the dsp ase is used
John Crispin [Mon, 6 May 2013 16:45:51 +0000 (16:45 +0000)]
rules.mk: add _dsp to ARCH_SUFFIX if the dsp ase is used

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36566

11 years agoramips: fix fypo in ethernet driver rt288x, rt3883
John Crispin [Mon, 6 May 2013 16:45:43 +0000 (16:45 +0000)]
ramips: fix fypo in ethernet driver rt288x, rt3883

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36565

11 years agoramips: Update ARC Freestation profile
John Crispin [Mon, 6 May 2013 16:45:35 +0000 (16:45 +0000)]
ramips: Update ARC Freestation profile

These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36564

11 years agoramips: Support setting active_low in devicetree gpio-export
John Crispin [Mon, 6 May 2013 16:45:27 +0000 (16:45 +0000)]
ramips: Support setting active_low in devicetree gpio-export

Support setting active_low in devicetree gpio-export.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36563

11 years agoralink: unbreak uart pinmux handling
John Crispin [Mon, 6 May 2013 16:45:20 +0000 (16:45 +0000)]
ralink: unbreak uart pinmux handling

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36562

11 years agoramips: fix gpio base numbering
John Crispin [Mon, 6 May 2013 16:45:12 +0000 (16:45 +0000)]
ramips: fix gpio base numbering

make banks 0 based to unbreak userland ABI

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36561

11 years agoramips: add gpio base properties to dtsi files
John Crispin [Mon, 6 May 2013 16:45:04 +0000 (16:45 +0000)]
ramips: add gpio base properties to dtsi files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36560

11 years agoramips: unbreak rt2880 support
John Crispin [Mon, 6 May 2013 16:44:56 +0000 (16:44 +0000)]
ramips: unbreak rt2880 support

Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36559

11 years agoramips: fix DIR-602D1 flash size
John Crispin [Mon, 6 May 2013 16:44:47 +0000 (16:44 +0000)]
ramips: fix DIR-602D1 flash size

Fix DIR-620D1 flash size.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 36558

11 years agotools/mkimage: unbreak non-linux build again
Felix Fietkau [Mon, 6 May 2013 10:30:29 +0000 (10:30 +0000)]
tools/mkimage: unbreak non-linux build again

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36556

11 years agoodhcp6c: Make SLAAC-only work without reqprefix=no
Steven Barth [Mon, 6 May 2013 10:20:43 +0000 (10:20 +0000)]
odhcp6c: Make SLAAC-only work without reqprefix=no

Previously if the upstream router did not provide any DHCPv6-service
the wan6 interface would not come up even if RAs were received. The new
behavior allows the wan6 interface to comeup with RA-only configuration
after a timeout of 10s.

SVN-Revision: 36555

11 years agoipset-dns: support simultaneously populating IPv4 and IPv6 sets
Jo-Philipp Wich [Mon, 6 May 2013 10:01:45 +0000 (10:01 +0000)]
ipset-dns: support simultaneously populating IPv4 and IPv6 sets

SVN-Revision: 36554

11 years agobase-files: change network_find_wan() procedure to ignore default gateways in differe...
Jo-Philipp Wich [Mon, 6 May 2013 09:33:56 +0000 (09:33 +0000)]
base-files: change network_find_wan() procedure to ignore default gateways in different routing tables

SVN-Revision: 36553

11 years agoAdd ipset-dns - a tiny DNS proxy service which puts resolved ip addresses into a...
Jo-Philipp Wich [Mon, 6 May 2013 08:44:54 +0000 (08:44 +0000)]
Add ipset-dns - a tiny DNS proxy service which puts resolved ip addresses into a specified ipset

SVN-Revision: 36552

11 years agomkimage: update to 2013.04
Luka Perkov [Sun, 5 May 2013 20:11:04 +0000 (20:11 +0000)]
mkimage: update to 2013.04

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36550

11 years agosysupgrade: fixes broken pipe error during sysupgade
John Crispin [Sun, 5 May 2013 12:41:42 +0000 (12:41 +0000)]
sysupgrade: fixes broken pipe error during sysupgade

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36548

11 years agotoolchain/gcc: add support for 4.8-linaro
Felix Fietkau [Sat, 4 May 2013 13:37:41 +0000 (13:37 +0000)]
toolchain/gcc: add support for 4.8-linaro

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36545

11 years agotoolchain/gcc: forward port missing patches to gcc 4.8.0
Felix Fietkau [Sat, 4 May 2013 13:37:37 +0000 (13:37 +0000)]
toolchain/gcc: forward port missing patches to gcc 4.8.0

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36544

11 years agoramips: unbreak gpio handling for uart mux group
John Crispin [Sat, 4 May 2013 11:36:51 +0000 (11:36 +0000)]
ramips: unbreak gpio handling for uart mux group

this should fix the handling of corner cases

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36543

11 years agoat91: build .dtb file for the CalAmp LMU500 board
Gabor Juhos [Fri, 3 May 2013 19:01:00 +0000 (19:01 +0000)]
at91: build .dtb file for the CalAmp LMU500 board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36542

11 years agoar71xx: Fix AP135 PCI
Gabor Juhos [Fri, 3 May 2013 19:00:58 +0000 (19:00 +0000)]
ar71xx: Fix AP135 PCI

AP135 has a pluggable PCIE slot unlike AP136.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541

11 years agokernel: add veth module
Luka Perkov [Fri, 3 May 2013 15:16:50 +0000 (15:16 +0000)]
kernel: add veth module

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36540

11 years agoConfig.in: update options for cgroups and namespaces
Luka Perkov [Fri, 3 May 2013 15:16:49 +0000 (15:16 +0000)]
Config.in: update options for cgroups and namespaces

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36539

11 years agoConfig.in: fix formating
Luka Perkov [Fri, 3 May 2013 15:16:48 +0000 (15:16 +0000)]
Config.in: fix formating

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36538

11 years agohostapd: enable 802.11r for the -full variant (#13250)
Felix Fietkau [Fri, 3 May 2013 10:39:57 +0000 (10:39 +0000)]
hostapd: enable 802.11r for the -full variant (#13250)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36533

11 years agomac80211: merge a client mode channel switch handling fix
Felix Fietkau [Fri, 3 May 2013 09:14:03 +0000 (09:14 +0000)]
mac80211: merge a client mode channel switch handling fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36531

11 years agoar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce...
Felix Fietkau [Fri, 3 May 2013 09:12:19 +0000 (09:12 +0000)]
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530

11 years agokernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by...
Felix Fietkau [Thu, 2 May 2013 15:59:57 +0000 (15:59 +0000)]
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529

11 years agobcm63xx: split into two subtargets, generic and SMP
Jonas Gorski [Thu, 2 May 2013 15:28:31 +0000 (15:28 +0000)]
bcm63xx: split into two subtargets, generic and SMP

Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527

11 years agobcm63xx: add SMP support for BCM6362 and BCM6368
Jonas Gorski [Thu, 2 May 2013 15:28:26 +0000 (15:28 +0000)]
bcm63xx: add SMP support for BCM6362 and BCM6368

BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526

11 years agokernel: generic: don't strip /proc/irq on SMP
Jonas Gorski [Thu, 2 May 2013 15:28:12 +0000 (15:28 +0000)]
kernel: generic: don't strip /proc/irq on SMP

/proc/irq is needed for changing the SMP affinity of interrupts.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525

11 years agobcm63xx: fix hsspi flash registration for BCM6362
Jonas Gorski [Thu, 2 May 2013 15:28:10 +0000 (15:28 +0000)]
bcm63xx: fix hsspi flash registration for BCM6362

Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524

11 years agobcm63xx: fix/enable livebox minipci
Jonas Gorski [Thu, 2 May 2013 15:28:07 +0000 (15:28 +0000)]
bcm63xx: fix/enable livebox minipci

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523

11 years agoscripts/config: fix an option processing error that caused duplication in diffconfig...
Felix Fietkau [Thu, 2 May 2013 14:06:10 +0000 (14:06 +0000)]
scripts/config: fix an option processing error that caused duplication in diffconfig.sh output (#13384)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36522

11 years agofirewall3: update to git head
Jo-Philipp Wich [Thu, 2 May 2013 13:42:20 +0000 (13:42 +0000)]
firewall3: update to git head

- assume "tcp+udp" if no protcol is specified in rules or redirects (#13422, #13386)
- add support for fwmark matches and mark setting targets

SVN-Revision: 36521

11 years agouci: update to git head
Jo-Philipp Wich [Thu, 2 May 2013 12:40:13 +0000 (12:40 +0000)]
uci: update to git head

- copy permission of config files to state files to allow access to state info by non root users
- properly handle empty string case when unsetting lists

SVN-Revision: 36518

11 years agotools/mtools: disable iconv support, it breaks on some systems
Felix Fietkau [Thu, 2 May 2013 12:39:31 +0000 (12:39 +0000)]
tools/mtools: disable iconv support, it breaks on some systems

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36516

11 years agoatheros: remove static gpio_request() from board setup and include generic kmod-gpio...
Jo-Philipp Wich [Thu, 2 May 2013 11:46:53 +0000 (11:46 +0000)]
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.

This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.

SVN-Revision: 36513

11 years agokernel: netfilter.mk: Explicitly set the order of autoloaded modules
Jo-Philipp Wich [Thu, 2 May 2013 11:25:18 +0000 (11:25 +0000)]
kernel: netfilter.mk: Explicitly set the order of autoloaded modules

In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.

So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.

Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512

11 years agotoolchain: add missing patch to gcc v4.8.0
Jo-Philipp Wich [Thu, 2 May 2013 11:25:13 +0000 (11:25 +0000)]
toolchain: add missing patch to gcc v4.8.0

SVN-Revision: 36511

11 years agoFix install of iptables pkg-config files.
Jo-Philipp Wich [Thu, 2 May 2013 08:10:55 +0000 (08:10 +0000)]
Fix install of iptables pkg-config files.

libiptc.pc depends on libip[4|6]tc.pc, thus all of those need to be
installed.
Should fix collectd build and thus #13146; which should make collectd
appear in snapshots again.

Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36509

11 years agokernel: update linux 3.8 to 3.8.11
Gabor Juhos [Wed, 1 May 2013 22:15:18 +0000 (22:15 +0000)]
kernel: update linux 3.8 to 3.8.11

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507

11 years agobrcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
Florian Fainelli [Wed, 1 May 2013 21:52:25 +0000 (21:52 +0000)]
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch

And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506

11 years agobrcm63xx: add missing binary operands to BCM6345 ethernet patch
Florian Fainelli [Wed, 1 May 2013 21:12:40 +0000 (21:12 +0000)]
brcm63xx: add missing binary operands to BCM6345 ethernet patch

Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505

11 years agobrcm63xx: remove 3.7 kernel support
Florian Fainelli [Wed, 1 May 2013 21:12:26 +0000 (21:12 +0000)]
brcm63xx: remove 3.7 kernel support

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504

11 years agokernel: add md5sum for 3.9 final
Gabor Juhos [Tue, 30 Apr 2013 11:29:38 +0000 (11:29 +0000)]
kernel: add md5sum for 3.9 final

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36499

11 years agoar71xx: rename WNR2000v3 support patch
Gabor Juhos [Tue, 30 Apr 2013 10:44:11 +0000 (10:44 +0000)]
ar71xx: rename WNR2000v3 support patch

Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498

11 years agofirmware-utils/mktplinkfw: add description for -W option into usage output
Gabor Juhos [Tue, 30 Apr 2013 10:44:10 +0000 (10:44 +0000)]
firmware-utils/mktplinkfw: add description for -W option into usage output

Add description for -W <hwrev> option into usage output of mktplinkfw.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497

11 years agox86/geos: switch to 3.8.10
Gabor Juhos [Tue, 30 Apr 2013 10:44:09 +0000 (10:44 +0000)]
x86/geos: switch to 3.8.10

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496

11 years agolinux/3.9: implement pcibios_get_phb_of_node for MIPS
Gabor Juhos [Tue, 30 Apr 2013 10:44:08 +0000 (10:44 +0000)]
linux/3.9: implement pcibios_get_phb_of_node for MIPS

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495

11 years agolinux/3.8: use backported pcibios_get_phb_of_node patches
Gabor Juhos [Tue, 30 Apr 2013 10:44:07 +0000 (10:44 +0000)]
linux/3.8: use backported pcibios_get_phb_of_node patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494

11 years agokernel: update linux 3.8 to 3.8.10
Gabor Juhos [Tue, 30 Apr 2013 10:43:59 +0000 (10:43 +0000)]
kernel: update linux 3.8 to 3.8.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493

11 years agoat91: add missing config symbols
Gabor Juhos [Tue, 30 Apr 2013 10:43:58 +0000 (10:43 +0000)]
at91: add missing config symbols

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492

11 years agolinux/3.{8,9}: add missing symbols
Gabor Juhos [Tue, 30 Apr 2013 10:43:57 +0000 (10:43 +0000)]
linux/3.{8,9}: add missing symbols

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491

11 years agolinux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
Gabor Juhos [Tue, 30 Apr 2013 10:43:56 +0000 (10:43 +0000)]
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL

It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490

11 years agoramips: move dlink profile to correct sub folder - 2nd try
John Crispin [Tue, 30 Apr 2013 10:34:20 +0000 (10:34 +0000)]
ramips: move dlink profile to correct sub folder - 2nd try

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489

11 years agoramips: move dlink profile to correct sub folder
John Crispin [Tue, 30 Apr 2013 08:24:26 +0000 (08:24 +0000)]
ramips: move dlink profile to correct sub folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487