Gabor Juhos [Wed, 5 Sep 2012 19:26:50 +0000 (19:26 +0000)]
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
SVN-Revision: 33318
Gabor Juhos [Wed, 5 Sep 2012 19:22:51 +0000 (19:22 +0000)]
ar71xx: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33317
Gabor Juhos [Wed, 5 Sep 2012 19:22:48 +0000 (19:22 +0000)]
ramips: add rssileds to package set in profile for devices which got them.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33316
Florian Fainelli [Mon, 3 Sep 2012 20:25:51 +0000 (20:25 +0000)]
enable CFI command set 0002 FORCE_WORD_WRITE
SVN-Revision: 33315
Florian Fainelli [Mon, 3 Sep 2012 20:25:46 +0000 (20:25 +0000)]
pad squashfs image
SVN-Revision: 33314
Florian Fainelli [Mon, 3 Sep 2012 20:25:40 +0000 (20:25 +0000)]
add Generic and dLAN USB Extender profiles
SVN-Revision: 33313
Florian Fainelli [Mon, 3 Sep 2012 10:26:01 +0000 (10:26 +0000)]
nuport-mac: disable MAC RX and TX during interface close
Fixes sporadic crashes while reconfiguring the network interface.
SVN-Revision: 33312
Felix Fietkau [Wed, 29 Aug 2012 16:06:24 +0000 (16:06 +0000)]
hostapd: fix ap+sta issues
SVN-Revision: 33311
Gabor Juhos [Wed, 29 Aug 2012 10:37:55 +0000 (10:37 +0000)]
Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
That was based on assumptions.
SVN-Revision: 33310
Gabor Juhos [Wed, 29 Aug 2012 10:37:54 +0000 (10:37 +0000)]
ar71xx: all0315n: fix ethernet according to vendor info
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33309
Gabor Juhos [Wed, 29 Aug 2012 10:37:53 +0000 (10:37 +0000)]
ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
SVN-Revision: 33308
Gabor Juhos [Wed, 29 Aug 2012 10:37:51 +0000 (10:37 +0000)]
ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002
SVN-Revision: 33307
Gabor Juhos [Wed, 29 Aug 2012 10:37:49 +0000 (10:37 +0000)]
iwinfo: add hwinfo of AR9280 2T2R PCIe
SVN-Revision: 33306
Gabor Juhos [Wed, 29 Aug 2012 10:37:47 +0000 (10:37 +0000)]
ramips: make built-in switch transparent for ALL0256N and ALL5002
This allows them to transparently communicate with an external VLAN switch.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33305
Gabor Juhos [Wed, 29 Aug 2012 10:37:45 +0000 (10:37 +0000)]
ramips: Power down phy on disabled switch ports
Power down phy on disabled switch ports.
Haven't measured this myself yet, but according to this
http://www.8devices.com/community/viewtopic.php?f=6&t=156
it can save about 300mW of power.
[juhosg: fix checkpatch warning]
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33304
Gabor Juhos [Wed, 29 Aug 2012 10:37:43 +0000 (10:37 +0000)]
ramips: Add support for 8devices Carambola dev board.
Add support for 8devices Carambola dev board.
The Carambola is a small RT3050-based development board with two
ethernet ports, on-board chip antenna, usb and plenty of accessible
gpio ports, sold by 8devices.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33303
Gabor Juhos [Wed, 29 Aug 2012 10:37:41 +0000 (10:37 +0000)]
ramips: Rename POC registers
Rename POC registers.
The current code uses POC1-POC3.
The datasheet uses:
POC1: Port Control 0
POC1: Port Control 1
POC2: Port Control 2
So the first POC1 is a typo that should have been POC0, rename the
registers to POC0-POC2 accordingly.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33302
Gabor Juhos [Wed, 29 Aug 2012 10:37:40 +0000 (10:37 +0000)]
ramips: Minor ramips_esw.c cleanup
Stop handling VLAN setup in the kernel.
Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for
WL-351 and add some extra comments.
Also removes the en_vlan per-port flag that isn't very useful really, it now
is only controlled by the global enable_vlan flag.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33301
Gabor Juhos [Wed, 29 Aug 2012 10:37:38 +0000 (10:37 +0000)]
ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.
The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33300
Gabor Juhos [Wed, 29 Aug 2012 10:37:36 +0000 (10:37 +0000)]
ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c
This patch adds swconfig support for ramips_esw:
Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.
The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33299
Gabor Juhos [Wed, 29 Aug 2012 10:37:35 +0000 (10:37 +0000)]
ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.
Prepare for the main swconfig patch by cleaning up indentation a bit.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 33298
Gabor Juhos [Wed, 29 Aug 2012 10:37:33 +0000 (10:37 +0000)]
mac80211/rt2800: integrate cosmetic changes in rt3352 support
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33297
Gabor Juhos [Wed, 29 Aug 2012 10:37:32 +0000 (10:37 +0000)]
uboot-envtools: add configration for ramips devices
uboot-env settings for ALL0239-3G, ALL0256N, ALL5002.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33296
Gabor Juhos [Wed, 29 Aug 2012 10:37:30 +0000 (10:37 +0000)]
ar71xx: image: fix Profile name for TL-WA701 (closes #12094)
SVN-Revision: 33295
Gabor Juhos [Wed, 29 Aug 2012 10:11:55 +0000 (10:11 +0000)]
ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 33294
Jo-Philipp Wich [Wed, 29 Aug 2012 10:10:46 +0000 (10:10 +0000)]
iwinfo: add hwinfo for Rt3050 and maintain alphabetic order
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33293
John Crispin [Wed, 29 Aug 2012 10:08:30 +0000 (10:08 +0000)]
revert threadsafe patch
SVN-Revision: 33292
Jo-Philipp Wich [Wed, 29 Aug 2012 10:07:08 +0000 (10:07 +0000)]
ppp: introduce "authfail" option which specifies whether pppd should attempt to re-authenticate after a failed PAP/CHAP auth
SVN-Revision: 33291
Felix Fietkau [Wed, 29 Aug 2012 08:16:34 +0000 (08:16 +0000)]
ath9k: add fix to improve reliability of powersave clients
SVN-Revision: 33290
Felix Fietkau [Wed, 29 Aug 2012 08:16:31 +0000 (08:16 +0000)]
mac80211: reorganize patches
SVN-Revision: 33289
Gabor Juhos [Mon, 27 Aug 2012 18:09:57 +0000 (18:09 +0000)]
gemini: fix bus ids for PHY devices (closes: #12082)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33288
Gabor Juhos [Mon, 27 Aug 2012 14:55:38 +0000 (14:55 +0000)]
ar71xx: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33287
Gabor Juhos [Mon, 27 Aug 2012 14:55:37 +0000 (14:55 +0000)]
ar71xx: generate image for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33286
Gabor Juhos [Mon, 27 Aug 2012 14:55:36 +0000 (14:55 +0000)]
ar71xx: sysupgrade for the ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33285
Gabor Juhos [Mon, 27 Aug 2012 14:55:35 +0000 (14:55 +0000)]
ar71xx: rename all0258n.sh to allnet.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33284
Gabor Juhos [Mon, 27 Aug 2012 14:55:33 +0000 (14:55 +0000)]
uboot-envtools: add configuration for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33283
Gabor Juhos [Mon, 27 Aug 2012 14:55:32 +0000 (14:55 +0000)]
ar71xx: detect ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33282
Gabor Juhos [Mon, 27 Aug 2012 14:55:31 +0000 (14:55 +0000)]
ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33281
Gabor Juhos [Mon, 27 Aug 2012 14:55:26 +0000 (14:55 +0000)]
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33280
Felix Fietkau [Mon, 27 Aug 2012 12:23:25 +0000 (12:23 +0000)]
mac80211: fix a crash on accessing stale skb->dev references
SVN-Revision: 33279
Felix Fietkau [Mon, 27 Aug 2012 11:10:36 +0000 (11:10 +0000)]
ath9k: fix PA predistortion training, fixes hang issues and most likely also fixes #12073
SVN-Revision: 33278
Felix Fietkau [Mon, 27 Aug 2012 11:07:23 +0000 (11:07 +0000)]
ath9k: add a patch to fix ASPM related issues
SVN-Revision: 33277
Felix Fietkau [Sun, 26 Aug 2012 20:47:39 +0000 (20:47 +0000)]
madwifi: add mirror md5sum to fix issue with the disappeared svn repo (#12084)
SVN-Revision: 33276
Gabor Juhos [Sun, 26 Aug 2012 09:27:56 +0000 (09:27 +0000)]
generic: add support for the EON EN25Q64 SPI flash chip
It is used in some TL-WDR4310 devices. Closes #12077.
SVN-Revision: 33275
Gabor Juhos [Sun, 26 Aug 2012 08:15:11 +0000 (08:15 +0000)]
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
Commit
48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33274
John Crispin [Sun, 26 Aug 2012 06:31:04 +0000 (06:31 +0000)]
add missin -lpthread to the util - build bots spotted this
SVN-Revision: 33273
Gabor Juhos [Sun, 26 Aug 2012 06:30:37 +0000 (06:30 +0000)]
ar71xx: image: fix TL-WR1043ND board id (#12079)
SVN-Revision: 33272
Gabor Juhos [Fri, 24 Aug 2012 10:01:01 +0000 (10:01 +0000)]
package/util-linux: don't lie about availability of '%ms' scanf modifier
Use a patch from gentoo which allows building libmount even
if the C library does not supports %ms/%as.
See: https://bugs.gentoo.org/406303
SVN-Revision: 33270
John Crispin [Fri, 24 Aug 2012 09:58:42 +0000 (09:58 +0000)]
add safethread
SVN-Revision: 33269
John Crispin [Fri, 24 Aug 2012 06:15:06 +0000 (06:15 +0000)]
Enable eSATA sheevaplug
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
SVN-Revision: 33266
Gabor Juhos [Thu, 23 Aug 2012 14:27:36 +0000 (14:27 +0000)]
package/uboot-envtools: always install the fw_setenv symlink
It is required by sysupgrade on some boards, and it is only
working if a suitable /etc/fw_env.config is present on the
target board. If an user creates such configuration he/she
should know that it is a dangerous tool. The devices can
be bricked in several other ways anyway.
SVN-Revision: 33265
Gabor Juhos [Thu, 23 Aug 2012 13:17:47 +0000 (13:17 +0000)]
ar71xx: image: group and sort {Single,Multi}Profiles
SVN-Revision: 33264
Gabor Juhos [Thu, 23 Aug 2012 13:14:35 +0000 (13:14 +0000)]
ar71xx: image: group and sort mtdlayout definitions
SVN-Revision: 33263
Gabor Juhos [Thu, 23 Aug 2012 13:11:25 +0000 (13:11 +0000)]
ar71xx: image: use the MultiProfile helper for the Madwifi profile
SVN-Revision: 33262
Gabor Juhos [Thu, 23 Aug 2012 13:08:15 +0000 (13:08 +0000)]
ar71xx: image: automatically build a list of SingleProfiles
Use that for Default/Minimal profiles.
SVN-Revision: 33261
Gabor Juhos [Thu, 23 Aug 2012 13:05:05 +0000 (13:05 +0000)]
ar71xx: image: use the new helpers for the ZyXEL images
SVN-Revision: 33260
Gabor Juhos [Thu, 23 Aug 2012 13:01:55 +0000 (13:01 +0000)]
ar71xx: image: use the new helpers for the Zcomax images
SVN-Revision: 33259
Gabor Juhos [Thu, 23 Aug 2012 12:58:45 +0000 (12:58 +0000)]
ar71xx: image: use the new helpers for the WRT400 images
SVN-Revision: 33258
Gabor Juhos [Thu, 23 Aug 2012 12:55:35 +0000 (12:55 +0000)]
ar71xx: image: use the new helpers for the WZRHPG30XNH images
SVN-Revision: 33257
Gabor Juhos [Thu, 23 Aug 2012 12:52:25 +0000 (12:52 +0000)]
ar71xx: image: use the new helpers for the WHRHPG300N images
SVN-Revision: 33256
Gabor Juhos [Thu, 23 Aug 2012 12:49:15 +0000 (12:49 +0000)]
ar71xx: image: use the new helpers for the UBNTXM images
SVN-Revision: 33255
Gabor Juhos [Thu, 23 Aug 2012 12:46:06 +0000 (12:46 +0000)]
ar71xx: image: use the new helpers for the UBNT images
SVN-Revision: 33254
Gabor Juhos [Thu, 23 Aug 2012 12:42:56 +0000 (12:42 +0000)]
ar71xx: image: use the new helpers for the TPLINKOLD images
SVN-Revision: 33253
Gabor Juhos [Thu, 23 Aug 2012 12:39:46 +0000 (12:39 +0000)]
ar71xx: image: use the new helpers for the TPLINK-LZMA images
SVN-Revision: 33252
Gabor Juhos [Thu, 23 Aug 2012 12:36:35 +0000 (12:36 +0000)]
ar71xx: image: use the new helpers for the TPLINK images
SVN-Revision: 33251
Gabor Juhos [Thu, 23 Aug 2012 12:33:25 +0000 (12:33 +0000)]
ar71xx: image: use the new helpers for the Planex images
SVN-Revision: 33250
Gabor Juhos [Thu, 23 Aug 2012 12:30:15 +0000 (12:30 +0000)]
ar71xx: image: use the new helpers for the PB4X images
SVN-Revision: 33249
Gabor Juhos [Thu, 23 Aug 2012 12:27:06 +0000 (12:27 +0000)]
ar71xx: image: use the new helpers for the OpenMesh images
SVN-Revision: 33248
Gabor Juhos [Thu, 23 Aug 2012 12:23:56 +0000 (12:23 +0000)]
ar71xx: image: use the new helpers for the Netgear images
SVN-Revision: 33247
Gabor Juhos [Thu, 23 Aug 2012 12:20:46 +0000 (12:20 +0000)]
ar71xx: image: use the new helpers for the MyLoader images
SVN-Revision: 33246
Gabor Juhos [Thu, 23 Aug 2012 12:17:36 +0000 (12:17 +0000)]
ar71xx: image: use the new helpers for the DIR825B1 images
SVN-Revision: 33245
Gabor Juhos [Thu, 23 Aug 2012 12:14:26 +0000 (12:14 +0000)]
ar71xx: image: use the new helpers for the CyberTAN images
SVN-Revision: 33244
Gabor Juhos [Thu, 23 Aug 2012 12:11:17 +0000 (12:11 +0000)]
ar71xx: image: use the new helpers for the Cameo933x images
SVN-Revision: 33243
Gabor Juhos [Thu, 23 Aug 2012 12:08:07 +0000 (12:08 +0000)]
ar71xx: image: use the new helpers for the Cameo913x images
SVN-Revision: 33242
Gabor Juhos [Thu, 23 Aug 2012 12:04:57 +0000 (12:04 +0000)]
ar71xx: image: use the new helpers for the Cameo7240 images
SVN-Revision: 33241
Gabor Juhos [Thu, 23 Aug 2012 12:01:47 +0000 (12:01 +0000)]
ar71xx: image: use the new helpers for the AthGzip images
SVN-Revision: 33240
Gabor Juhos [Thu, 23 Aug 2012 11:58:37 +0000 (11:58 +0000)]
ar71xx: image: use the new helpers for the AthLzma images
SVN-Revision: 33239
Gabor Juhos [Thu, 23 Aug 2012 11:55:27 +0000 (11:55 +0000)]
ar71xx: image: use the new helpers for the ALFA images
SVN-Revision: 33238
Gabor Juhos [Thu, 23 Aug 2012 11:52:18 +0000 (11:52 +0000)]
ar71xx: image: add a few helper functions
These functions will be used to simplify the Makefile.
SVN-Revision: 33237
Gabor Juhos [Thu, 23 Aug 2012 11:49:07 +0000 (11:49 +0000)]
ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
SVN-Revision: 33236
Hauke Mehrtens [Wed, 22 Aug 2012 21:54:06 +0000 (21:54 +0000)]
update profiles
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder
SVN-Revision: 33235
Gabor Juhos [Wed, 22 Aug 2012 20:18:44 +0000 (20:18 +0000)]
ar71xx: add profile and build image for the TEW-712BR
SVN-Revision: 33234
Gabor Juhos [Wed, 22 Aug 2012 20:15:34 +0000 (20:15 +0000)]
tools/firmware-utils: add a new tool for TEW-712BR firmware generation
SVN-Revision: 33233
Gabor Juhos [Wed, 22 Aug 2012 20:12:24 +0000 (20:12 +0000)]
ar71xx: TEW-712BR user space support
SVN-Revision: 33232
Gabor Juhos [Wed, 22 Aug 2012 20:09:13 +0000 (20:09 +0000)]
ar71xx: add support for the TRENDnet TEW-712BR board
SVN-Revision: 33231
Gabor Juhos [Wed, 22 Aug 2012 19:11:10 +0000 (19:11 +0000)]
ar71xx: fix serial clock calculation on AR933x
Closes #12031.
SVN-Revision: 33230
Gabor Juhos [Wed, 22 Aug 2012 17:55:12 +0000 (17:55 +0000)]
ramips: fix board parameter for the NBG-419N (#12061)
SVN-Revision: 33229
John Crispin [Wed, 22 Aug 2012 15:07:32 +0000 (15:07 +0000)]
derive system from hostcc to allow building inside a chroot
SVN-Revision: 33228
Gabor Juhos [Wed, 22 Aug 2012 12:42:59 +0000 (12:42 +0000)]
ar71xx: fix comment style in mach-tl-wr2543n.c
SVN-Revision: 33227
Gabor Juhos [Wed, 22 Aug 2012 12:39:46 +0000 (12:39 +0000)]
ar71xx: fix mtd layout of the AP113
The 'mtdparts=' prefix and the name of the flash device is missing.
SVN-Revision: 33226
Gabor Juhos [Wed, 22 Aug 2012 12:36:35 +0000 (12:36 +0000)]
ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33225
Gabor Juhos [Wed, 22 Aug 2012 12:33:22 +0000 (12:33 +0000)]
ar71xx: add ALL0305 board alias
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33224
Gabor Juhos [Wed, 22 Aug 2012 09:46:30 +0000 (09:46 +0000)]
ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33220
Gabor Juhos [Wed, 22 Aug 2012 09:43:18 +0000 (09:43 +0000)]
ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 33219
John Crispin [Wed, 22 Aug 2012 09:22:38 +0000 (09:22 +0000)]
tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
John Crispin [Wed, 22 Aug 2012 09:19:11 +0000 (09:19 +0000)]
lantiq: dsl: fix status polling loop
doesn't need to do it 20 times all the time, missing loop condition check
Signed-off-by: Conor O'Gorman <i@conorogorman.net>
SVN-Revision: 33217
John Crispin [Wed, 22 Aug 2012 09:14:42 +0000 (09:14 +0000)]
dnsmasq: Set prefix on-link bit in RAs
This is fix an issue with dnsmasq's RA that does not set the "on-link" bit, making all local IPv6 traffic go to the router then to the destination host, not directly to each other.
patch is from dnsmasq git
SVN-Revision: 33216
John Crispin [Wed, 22 Aug 2012 09:10:24 +0000 (09:10 +0000)]
add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>
SVN-Revision: 33215
Jo-Philipp Wich [Sun, 19 Aug 2012 15:59:24 +0000 (15:59 +0000)]
comgt: handle service mode for Huawai modems (#12039)
It seems that the comgt package does not handle the Huawei 3G USB dongle E176 correctly (and probably other Huawei dongles too). My dongle appears as ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem and 3G/UMTS
connections work well. However, no connection is established if only 2G/GPRS is available: the pppd chat script fails with NO CARRIER although the dongle is registered to the network (via 2G). As outlined in this wiki or this
blog, Huawei chips use the AT^SYSCFG command to set 2G or 3G mode, which is not implemented in comgt at the moment. Thus I wrote a patch for /lib/network/3g.sh which adds support for the "service" option in the network
configuration with Huawei dongles. By default (if no "service" option is specified) also 2G is used when 3G is unavailable. The Huawei dongle is detected analogously to other chips (the output of gcom -d /dev/ttyUSB0 -s
/etc/gcom/getcardinfo.gcom is scanned for huawei).
Some further information: The AT^SYSCFG command seems to be respected only once after the dongle is attached (or after the host is powered up). Resetting the dongle seems to render the serial port unusable in some cases.
However, the patch sets a useful mode by default which should cover most use cases (3G preferred, but 2G allowed) and if 3G-only or 2G-only mode is required the device can be power cycled.
SVN-Revision: 33212
Hauke Mehrtens [Sat, 18 Aug 2012 15:45:18 +0000 (15:45 +0000)]
remove unused file
SVN-Revision: 33210
projects / openwrt / staging / zorun.git / log