Felix Fietkau [Sun, 5 Oct 2014 11:50:42 +0000 (11:50 +0000)]
mac80211_hwsim: select 802.11n support for hostapd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42766
Felix Fietkau [Sun, 5 Oct 2014 11:01:49 +0000 (11:01 +0000)]
relayd: update to the latest version, fixes a build error with the new gcc (#18010)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42765
Felix Fietkau [Sun, 5 Oct 2014 10:55:55 +0000 (10:55 +0000)]
hostapd: allow using iapp for any encryption type (fixes #18022)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42764
Felix Fietkau [Sun, 5 Oct 2014 10:26:26 +0000 (10:26 +0000)]
hostapd: merge an upstream patch for pmksa cache
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42762
Felix Fietkau [Sun, 5 Oct 2014 10:26:17 +0000 (10:26 +0000)]
iwinfo: detect AC PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42761
Felix Fietkau [Sun, 5 Oct 2014 10:26:10 +0000 (10:26 +0000)]
iwinfo: detect HT PHY for broadcom-wl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42760
Felix Fietkau [Sun, 5 Oct 2014 10:26:05 +0000 (10:26 +0000)]
iwinfo: fix handling of accessing nl80211 interfaces via radio*
look up device path via uci instead of assuming a direct phy index
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42759
Felix Fietkau [Sun, 5 Oct 2014 10:25:55 +0000 (10:25 +0000)]
iwinfo: enable nl80211 support based on cfg80211, not mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42758
Jo-Philipp Wich [Sat, 4 Oct 2014 09:38:17 +0000 (09:38 +0000)]
iwinfo: handle 802.11ac mode for lua
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
SVN-Revision: 42757
Jonas Gorski [Fri, 3 Oct 2014 11:03:58 +0000 (11:03 +0000)]
brcm63xx: fix wrong fixups pointer
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42756
Steven Barth [Fri, 3 Oct 2014 10:56:43 +0000 (10:56 +0000)]
base-files: remove a 'not found' error message during system boot
During boot, a not found message is displayed for systems which do
not have uci 'network.globals.ula_prefix' defined in
/etc/config/network. The error message itself is not used and can
be ignored.
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42755
Rafał Miłecki [Fri, 3 Oct 2014 10:40:12 +0000 (10:40 +0000)]
bcm53xx: build R6250 firmware with "Other Regions" region
This prevents vendor firmware from warning about incompatible region.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42754
Felix Fietkau [Thu, 2 Oct 2014 20:00:41 +0000 (20:00 +0000)]
ar8216: set the pvid based on runtime state instead of port number to fix learning with enable_vlan = 0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42753
Steven Barth [Thu, 2 Oct 2014 19:47:39 +0000 (19:47 +0000)]
toolchain: Fix libthreaddb not being installed
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42752
Steven Barth [Thu, 2 Oct 2014 19:47:33 +0000 (19:47 +0000)]
busybox: remove validation message from bootup
A message:
uinteger - 9 = true
is displayed during boot. This is the result of the validate_data
command checking the cron log level. As the output is not
interesting, only the result, filter...
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42751
Steven Barth [Thu, 2 Oct 2014 19:47:28 +0000 (19:47 +0000)]
authsae: update to latest version
Send a netlink call to leave the mesh when meshd exits
Make hunting-and-pecking loop (more) resistant to side channel attack
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42750
Steven Barth [Thu, 2 Oct 2014 19:38:15 +0000 (19:38 +0000)]
6in4: Tos support
Tos support is added as a string parameter which can have the following values :
-inherit (outer header inherits the tos value of the inner header)
-hex value
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42749
Steven Barth [Thu, 2 Oct 2014 19:38:04 +0000 (19:38 +0000)]
6to4: Tos support
Tos support is added as a string parameter which can have the following values :
-inherit (outer header inherits the tos value of the inner header)
-hex value
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42748
Steven Barth [Thu, 2 Oct 2014 19:37:58 +0000 (19:37 +0000)]
6rd: Tos support
Tos support is added as a string parameter which can have the following values :
-inherit (outer header inherits the tos value of the inner header)
-hex value
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42747
Steven Barth [Thu, 2 Oct 2014 19:37:36 +0000 (19:37 +0000)]
IPIP: IP in IP package support
The package supports IP in IP by registering the ipip protocol handler
Following options are configurable
-peeraddr (IPv4 remote address)
-ipaddr (IPv4 local address)
-ttl (time to live of encapsulating packet)
-tos (type of service of encapsulating packet either inherit (outer header inherits the value of the inner header) or hex value)
-df (don't fragment flag of encapsulating packet)
-mtu (IPIP tunnel mtu)
-tunlink (bind tunnel to this interface)
-zone (firewall zone to which the IPIP tunnel will be added)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42746
Steven Barth [Thu, 2 Oct 2014 19:37:25 +0000 (19:37 +0000)]
netifd: fix an error message during network shutdown
When 'wifi down' is called by /etc/init.d/network, it is run from
stop_service( ). This function is in turn invoked from stop( ).
stop( ) messes up the order by first procd_kill-ing the network
settings, then calling wifi to down the wifi networking
interfaces. By redefining stop( ) instead, the proper order is
restored.
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42745
Steven Barth [Thu, 2 Oct 2014 19:37:17 +0000 (19:37 +0000)]
netifd: add IPIP tunnel support (thx Hans Dedecker)
SVN-Revision: 42744
Rafał Miłecki [Thu, 2 Oct 2014 19:30:08 +0000 (19:30 +0000)]
bcm53xx: early support for Netgear R6300 V2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42743
Steven Barth [Thu, 2 Oct 2014 19:15:38 +0000 (19:15 +0000)]
map: fix portsets starting with 0 and use regular NAT for 1:1 MAP
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42741
Jonas Gorski [Thu, 2 Oct 2014 12:26:36 +0000 (12:26 +0000)]
brcm63xx: update spw500v sprom to values from gpl tarball
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42740
Jonas Gorski [Thu, 2 Oct 2014 12:26:19 +0000 (12:26 +0000)]
brcm63xx: reorder some patches according to their upstream state
The irq rewrite was accepted upstream.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42739
Jonas Gorski [Thu, 2 Oct 2014 12:26:07 +0000 (12:26 +0000)]
brcm63xx: Add DT support for 96368MVWG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42738
Jonas Gorski [Thu, 2 Oct 2014 12:25:57 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96368MVNgr
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42737
Jonas Gorski [Thu, 2 Oct 2014 12:25:41 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96358VW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42736
Jonas Gorski [Thu, 2 Oct 2014 12:25:36 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96358VW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42735
Jonas Gorski [Thu, 2 Oct 2014 12:25:27 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96338W
Renamed of_board_id to convention.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42734
Jonas Gorski [Thu, 2 Oct 2014 12:25:22 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96338GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42733
Jonas Gorski [Thu, 2 Oct 2014 12:25:13 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96348R
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42732
Jonas Gorski [Thu, 2 Oct 2014 12:25:07 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96348GW-11
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42731
Jonas Gorski [Thu, 2 Oct 2014 12:25:01 +0000 (12:25 +0000)]
brcm63xx: Add DT support for 96348GW-10
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42730
Jonas Gorski [Thu, 2 Oct 2014 12:24:39 +0000 (12:24 +0000)]
brcm63xx: Add DT support for 96348GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42729
Jonas Gorski [Thu, 2 Oct 2014 12:24:34 +0000 (12:24 +0000)]
brcm63xx: Add DT support for 96345GW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42728
Jonas Gorski [Thu, 2 Oct 2014 12:24:29 +0000 (12:24 +0000)]
brcm63xx: Add DT support for 963281TAN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42727
Jonas Gorski [Thu, 2 Oct 2014 12:24:14 +0000 (12:24 +0000)]
brcm63xx: fix brcm63xx fallback typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42726
Jonas Gorski [Thu, 2 Oct 2014 12:24:05 +0000 (12:24 +0000)]
brcm-wl: use new brcm63xx fallback sprom
This fixes brcm63xx fallback sprom extraction.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42725
Felix Fietkau [Thu, 2 Oct 2014 12:19:37 +0000 (12:19 +0000)]
uqmi: set data format to 802.3 at startup
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42724
Felix Fietkau [Thu, 2 Oct 2014 12:19:26 +0000 (12:19 +0000)]
uqmi: do not wait for network connection before starting dhcp
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42723
Felix Fietkau [Thu, 2 Oct 2014 12:19:09 +0000 (12:19 +0000)]
uqmi: update to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42722
Felix Fietkau [Thu, 2 Oct 2014 12:18:58 +0000 (12:18 +0000)]
uqmi: use the autoconnect feature
Instead of connecting once and saving the packet data handle, let the
firmware handle connecting/reconnecting automatically. This is more
reliable and reduces reliance on potentially stale data.
Use the global packet data handle to attempt to disable autoconnect
before restarting the connection. This ensures that the firmware will
take the new APN/auth settings.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42721
Felix Fietkau [Thu, 2 Oct 2014 12:18:43 +0000 (12:18 +0000)]
uqmi: replace logger calls in netifd with echo
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42720
Felix Fietkau [Thu, 2 Oct 2014 12:18:28 +0000 (12:18 +0000)]
uqmi: work out the ifname instead of relying on it being in uci
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42719
Rafał Miłecki [Thu, 2 Oct 2014 12:05:58 +0000 (12:05 +0000)]
bcm53xx: early buttons support (without interrupts)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42718
Rafał Miłecki [Thu, 2 Oct 2014 10:42:30 +0000 (10:42 +0000)]
bcm53xx: backport bcma RFC patch that fixes LEDs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42717
Rafał Miłecki [Thu, 2 Oct 2014 09:51:54 +0000 (09:51 +0000)]
bcm53xx: support devices with more (13+) partitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42716
Rafał Miłecki [Thu, 2 Oct 2014 05:54:18 +0000 (05:54 +0000)]
bcm53xx: select LEDs support by default
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42715
Rafał Miłecki [Wed, 1 Oct 2014 13:38:50 +0000 (13:38 +0000)]
bcm53xx: add BCM5301X patches sent upstream (bus and R6250 LEDs)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42711
Rafał Miłecki [Wed, 1 Oct 2014 13:37:36 +0000 (13:37 +0000)]
kernel: update bcma to the tag master-2014-09-30 (wireless-next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42710
Rafał Miłecki [Wed, 1 Oct 2014 07:59:03 +0000 (07:59 +0000)]
bcm53xx: rename BCM5301X DTS patch to match upstream order
SVN-Revision: 42708
Felix Fietkau [Tue, 30 Sep 2014 21:36:33 +0000 (21:36 +0000)]
binutils: fix build with gcc 4.9
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42707
Felix Fietkau [Tue, 30 Sep 2014 21:36:28 +0000 (21:36 +0000)]
gcc: add 4.9-linaro based on the 2014.09 release
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42706
Felix Fietkau [Tue, 30 Sep 2014 21:36:17 +0000 (21:36 +0000)]
binutils: select linaro 2.24 version by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42705
Felix Fietkau [Tue, 30 Sep 2014 21:36:12 +0000 (21:36 +0000)]
binutils: update -linaro to 2.24.0-2014.09
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42704
Felix Fietkau [Tue, 30 Sep 2014 21:36:04 +0000 (21:36 +0000)]
ath9k: add a fix for dynack
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42703
Felix Fietkau [Mon, 29 Sep 2014 18:51:25 +0000 (18:51 +0000)]
ath9k: add back missing fixes from the last version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42701
Steven Barth [Mon, 29 Sep 2014 18:00:02 +0000 (18:00 +0000)]
GRE: Tos support
Tos support is added as a generic grev4/grev6 parameter which can have the following values :
-inherit (outer header inherits the tos value of the inner header)
-hex value
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42700
Steven Barth [Mon, 29 Sep 2014 17:59:50 +0000 (17:59 +0000)]
netifd: add support for promisc and GRE tos option
SVN-Revision: 42699
Steven Barth [Mon, 29 Sep 2014 08:35:18 +0000 (08:35 +0000)]
nftables: bump for bugfixes
SVN-Revision: 42698
Steven Barth [Mon, 29 Sep 2014 08:31:31 +0000 (08:31 +0000)]
libnftnl: bump for bugfixes
SVN-Revision: 42697
Steven Barth [Mon, 29 Sep 2014 05:24:32 +0000 (05:24 +0000)]
netfilter: unbreak kmod-ipt-nat for <3.7
SVN-Revision: 42696
Zoltan Herpai [Sun, 28 Sep 2014 23:21:59 +0000 (23:21 +0000)]
sunxi: add profile for Olimex A13 SOM
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42693
Zoltan Herpai [Sun, 28 Sep 2014 23:20:36 +0000 (23:20 +0000)]
uboot-sunxi: add support for Olimex A13 SOM
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42692
Zoltan Herpai [Sun, 28 Sep 2014 20:39:04 +0000 (20:39 +0000)]
uboot-sunxi: add patch to fix gmac reliability issue on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42691
Hauke Mehrtens [Sun, 28 Sep 2014 18:03:33 +0000 (18:03 +0000)]
bcm53xx: activate some workarounds for errors in the Cortex-A9
BCM4708 uses a Cortex-A9 rev r3p0 and a L2C-310 rev r3p2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42690
Felix Fietkau [Sat, 27 Sep 2014 21:19:27 +0000 (21:19 +0000)]
iw: add support for dynamic distance selection (supported by ath9k now)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42689
Felix Fietkau [Sat, 27 Sep 2014 21:19:18 +0000 (21:19 +0000)]
iw: sync nl80211.h
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42688
Felix Fietkau [Sat, 27 Sep 2014 20:54:12 +0000 (20:54 +0000)]
ar71xx: revert accidental kernel upgrade
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42687
Felix Fietkau [Sat, 27 Sep 2014 20:52:11 +0000 (20:52 +0000)]
ath9k: fix some issues with ar934x rev 3 (especially ad-hoc mode)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42686
Felix Fietkau [Sat, 27 Sep 2014 20:52:05 +0000 (20:52 +0000)]
ar71xx: add wmac callback for reading soc revision on ar934x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42685
Felix Fietkau [Sat, 27 Sep 2014 20:51:49 +0000 (20:51 +0000)]
ar71xx: refresh 3.14 kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42684
Felix Fietkau [Sat, 27 Sep 2014 20:51:43 +0000 (20:51 +0000)]
mac80211: update to wireless-testing 2014-09-26
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42683
Florian Fainelli [Sat, 27 Sep 2014 19:11:55 +0000 (19:11 +0000)]
brcm2708: switch to 3.14
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42681
Florian Fainelli [Sat, 27 Sep 2014 19:11:37 +0000 (19:11 +0000)]
brcm2708: add 3.14 support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42680
Florian Fainelli [Sat, 27 Sep 2014 19:11:06 +0000 (19:11 +0000)]
kernel: add missing CONFIG_BACKLIGHT_GPIO to 3.14
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42679
Florian Fainelli [Sat, 27 Sep 2014 19:10:51 +0000 (19:10 +0000)]
brcm2708: update 3.10 patches with raspberrypi/rpi-3.10.y of 27 Apr. 2014
Update the 3.10 rasperry patches by rebasing raspberry/rpi-3.10-y
against linux-stable/v3.10.49.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42678
Florian Fainelli [Sat, 27 Sep 2014 17:42:15 +0000 (17:42 +0000)]
brcm2708-gpu-fw: update to Sep. 27 2014 snapshot
Update the brcm2708-gpu-fw package to commit
e25efc4545d0cef7c49c82e770b3e4ccfc8aba4c
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42676
Steven Barth [Sat, 27 Sep 2014 16:57:47 +0000 (16:57 +0000)]
odhcp6c: work around weird ISP RS behaviour
SVN-Revision: 42674
Rafał Miłecki [Sat, 27 Sep 2014 09:44:24 +0000 (09:44 +0000)]
kernel: merge two mtdpart.c patches
It does not make sense to add some code and remove is 4 patches later.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42673
Rafał Miłecki [Sat, 27 Sep 2014 07:49:48 +0000 (07:49 +0000)]
kernel: update bcma to the tag master-2014-09-26 (wireless-next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42672
Felix Fietkau [Fri, 26 Sep 2014 15:55:45 +0000 (15:55 +0000)]
comgt: fix directip auth type
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42671
Steven Barth [Fri, 26 Sep 2014 13:58:40 +0000 (13:58 +0000)]
comgt: fireup a dhcpv6-client for directip as well
SVN-Revision: 42670
Felix Fietkau [Fri, 26 Sep 2014 13:44:21 +0000 (13:44 +0000)]
comgt: in directip, derive the wwan ifname automatically instead of specifying it in the config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42669
Steven Barth [Fri, 26 Sep 2014 08:57:36 +0000 (08:57 +0000)]
dnsmasq: bump to 2.72
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42668
Florian Fainelli [Thu, 25 Sep 2014 19:09:17 +0000 (19:09 +0000)]
realview: add protocol argument to ucidef_set_interface_raw
Now that ucidef_set_interface_raw() has been updated to take a protocol
argument, use that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42666
Florian Fainelli [Thu, 25 Sep 2014 19:08:56 +0000 (19:08 +0000)]
base-files: add a protocol argument to ucidef_set_interface_raw
Add a third argument to ucidef_set_interface_raw, which is specifying
the protocol.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42665
Steven Barth [Thu, 25 Sep 2014 11:53:12 +0000 (11:53 +0000)]
odhcpd: fix segfault when parsing domain options in UCI
SVN-Revision: 42663
Felix Fietkau [Thu, 25 Sep 2014 10:51:56 +0000 (10:51 +0000)]
curl: only set ca path for openssl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42662
Felix Fietkau [Thu, 25 Sep 2014 10:37:06 +0000 (10:37 +0000)]
curl: use the system certificates
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>
SVN-Revision: 42661
Felix Fietkau [Thu, 25 Sep 2014 07:38:02 +0000 (07:38 +0000)]
ca-certificates: create symbolic link for certificate hashes
Implementing "add-cert.sh" functionality described at
http://wiki.openwrt.org/doc/howto/wget-ssl-certs into Makefile
otherwise you need to create symbolic links for certificate hashes
yourself.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 42660
Rafał Miłecki [Wed, 24 Sep 2014 21:08:17 +0000 (21:08 +0000)]
bcm53xx: add a patch that fixes booting problems
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42659
Felix Fietkau [Wed, 24 Sep 2014 17:04:20 +0000 (17:04 +0000)]
comgt: initialize ifname for directip
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42658
Felix Fietkau [Wed, 24 Sep 2014 08:07:45 +0000 (08:07 +0000)]
comgt: add no_device=1 for directip proto
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42657
Felix Fietkau [Wed, 24 Sep 2014 08:07:40 +0000 (08:07 +0000)]
comgt: fix misplaced : in directip setup script
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42656
Felix Fietkau [Tue, 23 Sep 2014 10:41:24 +0000 (10:41 +0000)]
ustream-ssl: select polarssl as default variant, skip openssl/cyassl dependencies if unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42655
Felix Fietkau [Tue, 23 Sep 2014 10:41:15 +0000 (10:41 +0000)]
build: allow packages with build variants to explicitly select a default variant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42654
Felix Fietkau [Tue, 23 Sep 2014 10:19:58 +0000 (10:19 +0000)]
ar71xx: ar8216: tagged+untagged on ar8327 (#12181)
This allows tagged and untagged traffic together on the same port on ar8327
switch devices.
I looked at the first attempt to do this in r40777 (ar71xx: Fix tagged+untagged
operation on AR8327N (#12181)). I also set the vlan and port egress policies
like that change. But I change vlan_tagged in an less intrusive way. The
tagged/untagged decision is now based on the following rules:
- if vid != pvid then traffic is always tagged
- if vid == pvid then vlan_tagged stores if the traffic should be tagged
Tested on TP-Link WDR-3600 (ar8327N).
Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
SVN-Revision: 42653
projects / openwrt / openwrt.git / log