Zhai Zhaoxuan [Tue, 11 Jul 2017 10:12:00 +0000 (18:12 +0800)]
packages: nvram: fix memory leak in _nvram_free
The value of nvram_tuple_t is allocated in _nvram_realloc,
but it is not freed in _nvram_free.
Signed-off-by: Zhai Zhaoxuan <zhaizhaoxuan@xiaomi.com>
(cherry picked from commit
c382237ac33a787043b22abc42f0c5a80278baae)
Antonio Quartulli [Fri, 9 Nov 2012 14:23:34 +0000 (15:23 +0100)]
mac80211: don't pass the hostapd ctrl iface in adhoc
Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant
to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
(cherry picked from commit
0da54fa6428ea98d31b49f5d9a4a272214f5d188)
Sven Eckelmann [Tue, 7 Nov 2017 10:48:40 +0000 (11:48 +0100)]
hostapd: explicitly set beacon interval for wpa_supplicant
The beacon_int is currently set explicitly for hostapd and when LEDE uses
iw to join and IBSS/mesh. But it was not done when wpa_supplicant was used
to join an encrypted IBSS or mesh.
This configuration is required when an AP interface is configured together
with an mesh interface. The beacon_int= line must therefore be re-added to
the wpa_supplicant config. The value is retrieved from the the global
variable.
Fixes: 1a16cb9c67f0 ("mac80211, hostapd: always explicitly set beacon interval")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [rebase]
(cherry picked from commit
772afef61dc68e2470f4da130fac862ccf2fb105)
Sven Eckelmann [Thu, 11 May 2017 06:56:50 +0000 (08:56 +0200)]
hostapd: set mcast_rate in mesh mode
The wpa_supplicant code for IBSS allows to set the mcast rate. It is
recommended to increase this value from 1 or 6 Mbit/s to something higher
when using a mesh protocol on top which uses the multicast packet loss as
indicator for the link quality.
This setting was unfortunately not applied for mesh mode. But it would be
beneficial when wpa_supplicant would behave similar to IBSS mode and set
this argument during mesh join like authsae already does. At least it is
helpful for companies/projects which are currently switching to 802.11s
(without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS
because newer drivers seem to support 802.11s but not IBSS anymore.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh]
(cherry picked from commit
43f66943d0dbf0ed0ec2a9cb071d0fbded2fbe35)
Hans Dedecker [Mon, 13 Nov 2017 21:33:48 +0000 (22:33 +0100)]
igmpproxy: remove firewall rules when service is stopped
Remove multicast routing firewall rules when the igmpproxy is stopped by
triggering a firewall config change.
Keeping the firewall open from the wan for igmp and udp multicast is not
desired when the igmpproxy service is inactive.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit
31ebbe34ccc066c212ef20de0856ab3a428fb801)
Martin Schiller [Mon, 9 Oct 2017 08:12:04 +0000 (10:12 +0200)]
openvpn: add support to start/stop single instances
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (PKG_RELEASE increase)
(cherry picked from commit
e2f25e607d2092cffa45196e7997854feb464232)
Alexander Couzens [Fri, 4 Aug 2017 11:09:12 +0000 (13:09 +0200)]
package/elfutils: add CFLAG -Wno-format-nonliteral
When a library is using fortify-packages GCC will complain about
"error: format not a string literal, argument types not checked".
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
(cherry picked from commit
6ab45214644166846398e5e520d151c05cc4dd55)
Felix Fietkau [Thu, 9 Nov 2017 11:21:15 +0000 (12:21 +0100)]
tools/coreutils: install readlink
Parts of the build system use non-portable invocation of readlink
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
6bcc1c5331c797004e1b43168eb116d2d14b0102)
Jo-Philipp Wich [Mon, 6 Nov 2017 11:04:25 +0000 (12:04 +0100)]
uhttpd: fix query string handling
Update to latest Git in order to fix potential memory corruption and invalid
memory access when handling query strings in conjunction with active basic
authentication.
a235636 2017-11-04 file: fix query string handling
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
05a4200d56efe439e298c8af3d82ac221b0e86e9)
Ralph Sennhauser [Sun, 22 Oct 2017 20:21:22 +0000 (22:21 +0200)]
openssl: fix cryptodev config dependency
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
(cherry picked from commit
f5468d248613fee51d19715e0fa6e37012c0eda7)
Koen Vandeputte [Tue, 24 Oct 2017 14:20:22 +0000 (16:20 +0200)]
uqmi: replace legacy command invoke with newer type
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit
06d5d01e8acb4c7012bfa1ce8d432816b98088b0)
Michal Sojka [Fri, 3 Nov 2017 21:31:42 +0000 (22:31 +0100)]
procd: Always tell cmake whether to include seccomp support or not
Without this change, when a user disables seccomp support in .config,
procd does not get recompiled unless the package is cleaned manually.
It is because when -D option is missing from cmake command line, cmake
uses cached value from the previous run where seccomp was enabled.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
(cherry picked from commit
0e300a3a71264d8938b17f9fb0d5f1ab33a0434a)
Yousong Zhou [Mon, 6 Nov 2017 02:43:25 +0000 (10:43 +0800)]
libunwind: disable building with ssp
If we enable -fstack-protector while building libunwind, function
__stack_chk_fail_local will be referred to for i386 and powerpc32
arches. This will cause link failure because the default gcc build
specs says no link_ssp if -nostdlib is given.
The error message:
OpenWrt-libtool: link: ccache_cc -shared -fPIC -DPIC .libs/os-linux.o mi/.libs/init.o mi/.libs/flush_cache.o mi/.libs/mempool.o mi/.libs/strerror.o x86/.libs/is_fpreg.o x86/.libs/regname.o x86/.libs/Los-linux.o mi/.libs/backtrace.o mi/.libs/dyn-cancel.o mi/.libs/dyn-info-list.o mi/.libs/dyn-register.o mi/.libs/Ldyn-extract.o mi/.libs/Lfind_dynamic_proc_info.o mi/.libs/Lget_accessors.o mi/.libs/Lget_proc_info_by_ip.o mi/.libs/Lget_proc_name.o mi/.libs/Lput_dynamic_unwind_info.o mi/.libs/Ldestroy_addr_space.o mi/.libs/Lget_reg.o mi/.libs/Lset_reg.o mi/.libs/Lget_fpreg.o mi/.libs/Lset_fpreg.o mi/.libs/Lset_caching_policy.o x86/.libs/Lcreate_addr_space.o x86/.libs/Lget_save_loc.o x86/.libs/Lglobal.o x86/.libs/Linit.o x86/.libs/Linit_local.o x86/.libs/Linit_remote.o x86/.libs/Lget_proc_info.o x86/.libs/Lregs.o x86/.libs/Lresume.o x86/.libs/Lstep.o x86/.libs/getcontext-linux.o -Wl,--whole-archive ./.libs/libunwind-dwarf-local.a ./.libs/libunwind-elf32.a -Wl,--no-whole-archive -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/lib -lc -lgcc -Os -march=i486 -fstack-protector -Wl,-z -Wl,now -Wl,-z -Wl,relro -nostartfiles -nostdlib -Wl,-soname -Wl,libunwind.so.8 -o .libs/libunwind.so.8.0.1
.libs/os-linux.o: In function `_Ux86_get_elf_image':
os-linux.c:(.text+0x588): undefined reference to `__stack_chk_fail_local'
x86/.libs/Lregs.o: In function `_ULx86_access_fpreg':
Lregs.c:(.text+0x25b): undefined reference to `__stack_chk_fail_local'
x86/.libs/Lresume.o: In function `_ULx86_resume':
Lresume.c:(.text+0xdc): undefined reference to `__stack_chk_fail_local'
collect2: error: ld returned 1 exit status
Makefile:2249: recipe for target 'libunwind.la' failed
The snippet from gcc -dumpspecs
%{!nostdlib:%{!nodefaultlibs:%(link_ssp) %(link_gcc_c_sequence)}}
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit
f0c37f6ceb10a1db0193d4270c6807c0b2f7a3a0)
Felix Fietkau [Tue, 24 Oct 2017 11:22:09 +0000 (13:22 +0200)]
tools/squashfs: use host cflags
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
20d363aed395e07ff42fe648f898b17f2077cc82)
Hauke Mehrtens [Mon, 16 Oct 2017 18:08:56 +0000 (20:08 +0200)]
ppp: make the patches apply correctly again
This fixes a compile problem recently introduced by me.
Fixes: f40fd43ab2f ("ppp: fix compile warning")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
a29848c67180396656e4e8a7ef47ae5b441a7325)
Hauke Mehrtens [Sun, 15 Oct 2017 12:19:20 +0000 (14:19 +0200)]
ppp: fix compile warning
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
f40fd43ab2fe0f5c707a07eb036e84af086f3066)
Hans Dedecker [Fri, 6 Oct 2017 07:21:35 +0000 (09:21 +0200)]
dropbear: fix PKG_CONFIG_DEPENDS
Add CONFIG_DROPBEAR_UTMP, CONFIG_DROPBEAR_PUTUTLINE to PKG_CONFIG_DEPENDS
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit
834c93e00bee4f7253a5c64d1a9c8202b1082b1a)
Marcin Jurkowski [Fri, 30 Jun 2017 11:13:50 +0000 (13:13 +0200)]
dropbear: make ssh compression support configurable
Adds config option to enable compression support which is usefull
when using a terminal sessions over a slow link. Impact on binary
size is negligible but additional 60 kB (uncompressed) is needed for
a shared zlib library.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
(cherry picked from commit
a816e1eac761bfdac720d00d15feb18b7b9fd1e3)
Michal Sojka [Tue, 12 Sep 2017 11:12:50 +0000 (13:12 +0200)]
procd: Install seccomp-trace symlink
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
(cherry picked from commit
1a5bf778fb4f8b648716d9f8275c6a0af503cfe5)
Magnus Kroken [Wed, 27 Sep 2017 17:45:32 +0000 (19:45 +0200)]
openvpn: update to 2.4.4
Fixes CVE-2017-12166: out of bounds write in key-method 1.
Remove the mirror that was temporarily added during the
2.4.3 release.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(cherry picked from commit
a9a37526a9df3b565f5242857d17887cb492afab)
Philip Prindeville [Tue, 19 Sep 2017 21:17:09 +0000 (15:17 -0600)]
build: remove @ as it's causing an error
Since $(DownloadMethod/unknown) is being invoked in the expansion of
$(call locked ...) anyway, you can't have an @ because the shell
doesn't know what to do with it.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit
76ba01a39216b8460846808b2fc10d5ee230a324)
Philip Prindeville [Tue, 19 Sep 2017 20:47:54 +0000 (14:47 -0600)]
usbutils: avoid duplicating the git revision
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit
3008fc9a7bbdcbb2563c99178ce8085396dd41e6)
Florian Fainelli [Sat, 16 Sep 2017 23:27:37 +0000 (16:27 -0700)]
dnsmasq: Pass TARGET_CPPFLAGS to Makefile
With the introduction of the ubus notifications, we would now fail building
dnsmasq with external toolchains that don't automatically search for headers.
Pass TARGET_CPPFLAGS to the Makefile to resolve that.
Fixes: 34a206bc1194 ("dnsmasq: add ubus notifications for new leases")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit
ef485bb23d207e0b1031d264a6fafce01d2bdf8f)
Alexandru Ardelean [Mon, 4 Sep 2017 13:16:00 +0000 (16:16 +0300)]
wwan: json format in some modem definitions
Method used:
```
cd package/network/utils/wwan/files/data
sed -e 's/}}/}/g' -i *
sed -e 's/}\t"acm": 1/\t"acm": 1/g' -i *
sed -e 's/}\t"generic": 1/\t"generic": 1/g' -i *
```
Manually adjusted commas.
Validated with
```
for f in `ls` ; do echo $f ; python -m json.tool < $f || break ; done
```
Thanks to @lynxis for pointing out the commas.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit
ad510c4d62fd6dd879a02cb2253eb37c2179d9c0)
Stijn Tintel [Mon, 28 Aug 2017 11:45:23 +0000 (14:45 +0300)]
base-files: add /etc/profile.d to conffiles
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
ef255fc57ece1415b2a81346dde7d8ee3a32dee7)
Stijn Tintel [Mon, 28 Aug 2017 11:42:22 +0000 (14:42 +0300)]
base-files: order conffiles alphabetically
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
8446d3de05d0e0a6246dba9621b15095e9073dfb)
Karl Palsson [Wed, 30 Aug 2017 17:44:00 +0000 (17:44 +0000)]
procd: mdns: Support txt values with spaces
Properly quote the arguments so that you can register a service with TXT
entries that contains spaces.
Example:
procd_add_mdns myservice tcp 9999 "key=descriptive text field 1" \
"another=something equally verbose"
Output before:
$ avahi-browse -r -v _myservice._tcp
_myservice._tcp local
hostname = [blah.local]
address = [192.168.255.74]
port = [9999]
txt = ["verbose" "equally" "another=something" "1" "field" "text" "key=descriptive"]
Output now:
$ avahi-browse -r -v _myservice._tcp
_myservice._tcp local
hostname = [blah.local]
address = [192.168.255.74]
port = [9999]
txt = ["another=something equally verbose" "key=descriptive text field 1"]
Signed-off-by: Karl Palsson <karlp@etactica.com>
(cherry picked from commit
7a423c389a162d2945901f0b5e7c604d36c64526)
João Chaínho [Thu, 31 Aug 2017 15:45:39 +0000 (16:45 +0100)]
ar71xx: fix switch port numbering on RB750r2 and RB750UPr2
This patch fixes the switch port numbering on Mikrotik RB750r2 (hEX lite) and RB750UPr2 (hEX PoE lite).
Tested on a RB750UPr2. Maybe this patch is applicable to other devices (e.g. RB951Ui-2nD, RB952Ui-5ac2nD) but I have no way to test them.
Signed-off-by: João Chaínho <joaochainho@gmail.com>
(cherry picked from commit
61027e343025b5f47e7e79db71576e6bd5e97c1d)
Zoltan Gyarmati [Sat, 26 Aug 2017 13:14:20 +0000 (15:14 +0200)]
scripts/dowload.pl: use glob to expand target dir
If CONFIG_DOWNLOAD_FOLDER is set to for example "~/dl", the download
script fails to create the .hash and .dl files with the following
errors:
Cannot create file ~/dl/dropbear-2017.75.tar.bz2.dl: No such file or directory
sh: 1: cannot create ~/dl/dropbear-2017.75.tar.bz2.hash: Directory nonexistent
If the tarball already exists in the ~/dl dir, it's properly found and
used, so this issue only affects the download.pl script.
This patch calls glob() on the target dir parameter, which will expand `~`.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
(cherry picked from commit
0a761fe8ef346c6f0a78097938b083e2d078b0e2)
Rosen Penev [Sat, 26 Aug 2017 03:12:13 +0000 (20:12 -0700)]
samba36: Remove syslog and load printers lines.
printer support is removed using 200-remove_printer_support.patch. the syslog parameter requires samba to be compiled with --with-syslog. Currently samba does not log to syslog and probably has not for a long time.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit
343e3d2ba8efe20554522419697e0e4c3038c92f)
Rosen Penev [Thu, 24 Aug 2017 23:51:24 +0000 (16:51 -0700)]
samba36: Don't resolve interfaces.
It's redundant and also buggy. IPv6 link local addresses and ::1 are not resolved for example. Doesn't matter since lo and br-lan for example, resolve to them.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
(cherry picked from commit
b2f60e6a7245c192703528a46dfb630c664dbc0c)
Rosen Penev [Thu, 24 Aug 2017 23:51:23 +0000 (16:51 -0700)]
samba36: Remove guest ok since LuCI configures it.
guest ok is set per share and as such, don't override it. also, fix an error introduced in the last commit.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit
ccb79a310c5273bf32d590323a99e72b587a0fb0)
Hauke Mehrtens [Sat, 15 Jul 2017 20:54:33 +0000 (22:54 +0200)]
config: make CONFIG_ALL_* select other CONIFG_ALL_* options
Select the other CONFIG_ALL_* options in the hierarchy when the master
option is selected. Currently CONFIG_ALL_KMODS is not selected when the
build bot selects CONFIG_ALL_NONSHARED for example.
Now the rtc kmods should get build when CONFIG_ALL_KMODS,
CONFIG_ALL_NONSHARED or CONFIG_ALL and CONFIG_RTC_SUPPORT are selected
like it is done by the build bots for targets with rtc support.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
589621b1c03c25e6436d30aaa508aef2484244a6)
BangLang Huang [Fri, 24 Feb 2017 02:58:09 +0000 (10:58 +0800)]
nvram: add help message for nvram magic not found
The program would failed if nvram magic not found
in specific partition.
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
(cherry picked from commit
69da83d9f12e4e48b546fc3fc3ff555034959211)
BangLang Huang [Fri, 24 Feb 2017 02:52:52 +0000 (10:52 +0800)]
nvram: improve argument check when program start
print help message when argument count is less
than 2.
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
(cherry picked from commit
c7e2a6fe923dc86bab14d94ead322a045efca4c9)
BangLang Huang [Fri, 24 Feb 2017 02:45:16 +0000 (10:45 +0800)]
nvram: add usage() function
Merge the help message into a single function,
so that we can use it somewhere else.
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
(cherry picked from commit
2a253e7cdbacd1bd19da80ea6f35a93b42655c3b)
BangLang Huang [Fri, 24 Feb 2017 02:16:17 +0000 (10:16 +0800)]
nvram: fix memory leak
Fix memory leak on nvram_open() and nvram_open_rdonly().
For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.
For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
(cherry picked from commit
1948d8e08c72106a01b359a30217cf92657cc79d)
Christian Schoenebeck [Tue, 15 Aug 2017 18:44:17 +0000 (20:44 +0200)]
ca-certificates: Update to
20170717
Update to
20170717
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
(cherry picked from commit
a2a226e6e83359ca0c7547ce9fed6ce4ecabc24b)
Rafał Miłecki [Mon, 7 Aug 2017 06:41:26 +0000 (08:41 +0200)]
base-files: drop unused preinit_echo function
It isn't used for years since the old 99_10_run_init has been dropped.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
1e13c6f77fc02df2bd8ed237ab9208ecdefb2dab)
Daniel Engberg [Tue, 8 Aug 2017 06:14:28 +0000 (08:14 +0200)]
tools/pkg-config: Update to 0.29.2
* Update pkg-config to 0.29.2
* Remove patch as it's upstreamed
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit
965df21fd16e5966c64f207fe053ab8b6863081f)
Florian Eckert [Tue, 1 Aug 2017 12:35:18 +0000 (14:35 +0200)]
base-files: suppress uci not found output in login.sh
Fix "uci: Entry not found" output if "ttylogin" is not set in
"etc/config/system"
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit
c31f0421ceb47f347ade7317f263fcd09cfe325f)
Jo-Philipp Wich [Wed, 26 Jul 2017 22:18:12 +0000 (00:18 +0200)]
scripts/package-metadata.pl: inhibit compile deps on missing build types
When a package declares a PKG_BUILD_DEPENDENCY or HOST_BUILD_DEPENDENCY on
a not existing build type, the metadata script will emit a reference to an
unresolvable build target in tmp/.packagedeps, causing the make process to
fail hard in a way not catchable by the IGNORE_ERRORS mechanism.
In a situation where a package "test-a" declares a build dependency
"PKG_BUILD_DEPENDS:=test-b/host" while the Makefile of "test-b" does not
implement a HostBuild, make fails with an unrecoverable error in the form:
make[1]: Entering directory '...'
make[1]: *** No rule to make target 'package/test-b/host/compile',
needed by 'package/test-a/compile'. Stop.
make[1]: Leaving directory '...'
.../toplevel.mk:200: recipe for target 'package/test-a/compile' failed
make: *** [package/test-a/compile] Error 2
Extend the metadata generation script to catch such unresolved references
and emit a visable warning upon detection.
After this change, the script will emit a warning similar to:
WARNING: Makefile "package/test-a/Makefile" has a build dependency on
"test-b/host" but "package/test-b/Makefile" does not implement a
"host" build type
Fixes a global build cluster outage which occured after the "python-cffi"
feed package removed its HostBuild which the "python-cryptography" package
build-depended on.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
bf5d32af2a675f7577b388b5eef2a11e6ce042eb)
Jo-Philipp Wich [Mon, 24 Jul 2017 11:33:33 +0000 (13:33 +0200)]
build: bundle-libraries.sh: do not override argv[0] in inner exec calls
Only mangle argv[0] of the first executed process and leave the argument
vector of subsequent invocations as-is to allow child programs to properly
discover resources relative to their binary locations.
Fixes "cc1" discovery when executing the host gcc through the bundled
"ccache" executable.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
9e64874fb2508e49e52898c238d817bd152bf2c2)
Rosen Penev [Fri, 21 Jul 2017 20:04:34 +0000 (13:04 -0700)]
samba36: Remove legacy options
Browseable is now set through LuCI per share, so remove it. Same with
writeable (inverted synonym for read only). domain master and preferred
master seem to be legacy settings for Windows 9x. encrypt passwords
defaults to yes. Probably should not be disabled either.
Also reordered alphabetically.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[rewrap commit message, fix SoB, fix author, bump pkg revsion]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
9dcb3fe7eb06b42c4f026e6cc5e89b2a18932782)
Daniel Engberg [Sun, 25 Jun 2017 16:14:33 +0000 (18:14 +0200)]
scripts/download.pl: Adjust URLs
Internet2 isn't considered a trusted issuer meaning that https links to
rit.edu will fail.
The host mirror.csclub.uwaterloo.ca has a trusted SSL cert and peering
is good so it can replace rit.edu without performance issues.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Jo-Philipp Wich: rewrapped commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
99c429512622566ee2bbde69fa8efb0f2bcda33e)
Jo-Philipp Wich [Sun, 16 Jul 2017 21:43:19 +0000 (23:43 +0200)]
build: fix invocation of bundled ld.so in SDK and Imagebuilder
Commit
72d751cba9 "build: rework library bundling" introduced a new helper
binary "runas" whose sole purpose was mangling the argv vector passed to
the actual called ELF image so that the renamed executable could obtain the
proper name from argv[0].
This approach, however totally defeated the purpose of calling bundled ELF
executables through the shipped ld.so loader since the execv() invocation
performed by "runas" would cause the kernel the interprete the final program
image through the system ELF loader again.
To solve the problem, use an alternative approach of shipping a shared object
"runas.so" which uses an ELF ".init_array" function pointer to obtain the
argv[] vector of the to-be-executed main() function and mangle it in-place.
The actual argv[0] value to use is communicated out-of-band using an
environment variable "RUNAS_ARG0" by the shell wrapper script. The wrapper
script also takes care of setting LD_PRELOAD to instruct the shipped ELF
loader to preload the actual ELF program image with the "runas.so" helper
library.
Fixes FS#909.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
ef1cafa736679eb035d405bcdf903fd1fb329865)
Kevin Darbyshire-Bryant [Fri, 16 Jun 2017 19:06:50 +0000 (20:06 +0100)]
kmod-sched-cake: drop maintainer
Drop myself from maintainership of 'cake'.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
(cherry picked from commit
c7f8bcede6be73d0c07e058d57b55e4efc746440)
Stijn Tintel [Sat, 11 Mar 2017 08:32:19 +0000 (09:32 +0100)]
zlib: use default Build/Configure rule
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
462ca4e059dbead678163da26fb4e14748f3021e)
Stijn Tintel [Sat, 11 Mar 2017 08:18:22 +0000 (09:18 +0100)]
lzo: use default Build/Configure rule
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
b3cba687a447478253f95febf17fa9376c98105d)
Alin Nastac [Fri, 16 Jun 2017 12:16:07 +0000 (14:16 +0200)]
netfilter: add iptables-mod-rpfilter package
Unlike /proc/sys/net/ipv4/conf/INTF/rp_filter flag, rule iptables -t raw
-I PREROUTING -m rpfilter --invert -j DROP prevents conntrack table to
become full when a packet flood with randomly selected source IP addresses
is received from the lan side.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
(cherry picked from commit
d8748e537f11ab5f2b5e2ed25d94baa5ce353984)
Daniel Golle [Wed, 5 Jul 2017 14:25:23 +0000 (16:25 +0200)]
bzip2: add symlink to binary
Other distributions incl. the OpenWrt ImageBuilder and SDK
expect to find the bzip2 executable in /bin.
Create a symlink at that location for compatibility.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
eb7c14d512482e18d05f61afa44205167ea094c0)
Stijn Tintel [Tue, 27 Jun 2017 20:30:01 +0000 (22:30 +0200)]
dropbear: add option to set max auth tries
Add a uci option to set the new max auth tries paramater in dropbear.
Set the default to 3, as 10 seems excessive.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
6371159b4ae8b4dd94d6319ac805b0c26962bb14)
Kevin Darbyshire-Bryant [Sun, 25 Jun 2017 20:40:43 +0000 (21:40 +0100)]
dropbear: server support option '-T' max auth tries
Add support for '-T n' for a run-time specification for maximum number
of authentication attempts where 'n' is between 1 and compile time
option MAX_AUTH_TRIES.
A default number of tries can be specified at compile time using
'DEFAULT_AUTH_TRIES' which itself defaults to MAX_AUTH_TRIES for
backwards compatibility.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
(cherry picked from commit
9aaf3d3501642640c9ec74268e671171c8de6103)
Yury Shvedov [Tue, 27 Jun 2017 08:43:54 +0000 (11:43 +0300)]
hostapd: configure NAS ID regardless of encryption
RADIUS protocol could be used not only for authentication but for
accounting too. Accounting could be configured for any type of networks.
However there is no way to configure NAS Identifier for non-WPA
networks without this patch.
Signed-off-by: Yury Shvedov <yshvedov@wimarksystems.com>
[cleanup commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
37c1513b1f98c93bf84bbcedd9782568e7d4abba)
Yury Shvedov [Tue, 27 Jun 2017 07:34:49 +0000 (10:34 +0300)]
hostapd: add acct_interval option
Make an ability to configure Accounting-Interim-Interval via UCI
Signed-off-by: Yury Shvedov <yshvedov@wimarksystems.com>
[add hostapd prefix, cleanup commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
0e7bbcd43b6f4b54ecc5c40130b5f86cbc9f1c07)
Luiz Angelo Daros de Luca [Sat, 17 Jun 2017 03:54:45 +0000 (00:54 -0300)]
valgrind: bump to 3.13.0
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(cherry picked from commit
991899cc5449d8595593a66c0130fdcaa088b36a)
Stefan Tomanek [Mon, 19 Jun 2017 10:41:11 +0000 (12:41 +0200)]
busybox: backport 'ip rule suppress_{prefixlength, ifgroup}'
This is a backport from the busybox repository
(
192dce4b84fb32346ebc5194de7daa5da3b8d1b4); it enables the use of the
suppress_{prefixlength,ifgroup} flags for policy routing rules.
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
(cherry picked from commit
de6ff1512955953e56735896c044c7aac97e14d9)
Yousong Zhou [Mon, 19 Jun 2017 06:41:47 +0000 (14:41 +0800)]
libunwind: update to version 1.2.1
Changes since 1.2
a77b0cd Bump version to v1.2.1
5f354cb mips/tilegx: Add missing unwind_i.h header file
620d1c3 Add aarch64 getcontext functionality.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit
77dc6a2ae7c94ac3d496ebab589d4574ac7169d0)
Daniel Golle [Fri, 16 Jun 2017 23:24:43 +0000 (01:24 +0200)]
imagebuilder: don't rewrite package list output
No longer rewrite opkg list output in package_list function, remove
the awk call in the pipe (which was intended for a single specific
use-case).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
d80d1b6c42aa663e6104f817daa5ea29d2e7073d)
Daniel Golle [Fri, 16 Jun 2017 22:54:46 +0000 (00:54 +0200)]
imagebuilder: clean package_list
commit
19ac879954 (imagebuilder: add package_list function) introduced
a new function 'package_list' to the imagebuilder Makefile.
Unfortunately the package list was poluted by stdout noise of the
Makefile itself as well as opkg. Redirect those outputs to stderr to
make sure that the package_list returned doesn't contain progress
info output but really only packages.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
1b555e1d2b1cb2ae3dd1832225e6c9d2c5df0a37)
Felix Fietkau [Fri, 16 Jun 2017 13:15:37 +0000 (15:15 +0200)]
build: remove old kernel-headers build directories
Saves space after updating kernel versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
76b62e602233d1a2e1f8ef1c0833bd22ebaaf832)
Paul Spooren [Tue, 13 Jun 2017 19:59:14 +0000 (21:59 +0200)]
imagebuilder: add package_list function
The imagebuilder can now list all available packages by using make
package_list. This is usefull for scripts to retrieve a list of all
packages with versions (and size)
Signed-off-by: Paul Spooren <paul@spooren.de>
[daniel@makrotopia.org: fixed commit message]
(cherry picked from commit
19ac879954210df3c6a010990bef42ad5c7fd967)
Jonas Gorski [Sun, 11 Jun 2017 10:50:14 +0000 (12:50 +0200)]
base-files: board.json's switch reset means existence, not argument
Don't pass the value unconditionally to swconfig as a parameter but
instead only call reset if it is 1.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit
fd952c7a83e5357f5dcab28c0bcaca756e27eaa0)
Alexandru Ardelean [Fri, 12 May 2017 08:50:05 +0000 (11:50 +0300)]
gdb: remove Build/Compile rule ; default one works
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit
ab485383fa4d60d6342cd5a4eb6b5429afba6b97)
Felix Fietkau [Thu, 1 Jun 2017 09:17:13 +0000 (11:17 +0200)]
rb532: enable high-res timers, refresh kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
2dc23a7576614181e35a0bf6444fc55144dd711b)
Felix Fietkau [Thu, 1 Jun 2017 09:15:39 +0000 (11:15 +0200)]
xburst: enable high-res timers, refresh kernel config
Helps with system performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
f859a7b696d79fae8dd98859a3451a6f9d77570f)
Felix Fietkau [Thu, 1 Jun 2017 09:10:21 +0000 (11:10 +0200)]
kernel: add CONFIG_SCHED_HRTICK=y to the generic config
It is used by pretty much every target
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from commit
b47fd7656336162360ebf66147326763ddae3f8d)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Alif M. Ahmad [Sat, 20 May 2017 07:11:16 +0000 (14:11 +0700)]
package/grub2: update to 2.02
Update to version 2.02
Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
(cherry picked from commit
415c47de79ada7496c39f435df0b0523472aee58)
Sergey Ryazanov [Tue, 6 Jun 2017 22:25:32 +0000 (01:25 +0300)]
ip17xx: correct aneg_done return value
PHY core treats any positive return value as the auto-negotiation done
indication. Since we do not actually check any device register in this
callback then update it to return positive value with a neutral meaning
instead of the register flag to avoid confusing for future readers.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit
2cc61e6e8e951b1480a024fdb66bc539aa163bbc)
Sergey Ryazanov [Tue, 6 Jun 2017 22:25:31 +0000 (01:25 +0300)]
mvswitch: fix autonegotiation issue
The Marvel
88E6060 switch has an MDIO interface, but does not emulate
regular PHY behavior for the host. The network core can not detect using
the generic code, whether the connection via the attached PHY can be
used or not. The PHY's state machine is stuck in a state of
auto-negotiation and does not go any further so the Ethernet interface
of the router stay forever in the not-runing state.
Fix this issue by implementing the aneg_done callback to be able to
inform the network core that the Ethernet interface link to which the
switch is connected can be marked as RUNNING.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit
913b2290caad437bb523d6f1ee5a70707f7f7ef4)
Hans Dedecker [Wed, 31 May 2017 14:24:11 +0000 (16:24 +0200)]
ppp: propagate master firewall zone to dynamic slave interface
Assign the virtual DHCPv6 interface the firewall zone of the parent interface
so fw3 knows the zone to which the virtual DHCPv6 interface belongs.
This guarantees the firewall settings are applied correctly for the virtual
DHCPv6 interface and allows to query the zone to which the virtual DHCPv6
interface belongs via the fw3 network option.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit
21f25bc4a325b3075d6426047640e9cf6176894c)
Julian Labus [Wed, 24 May 2017 14:32:18 +0000 (16:32 +0200)]
usbmode: remove devices with unsupported modes
remove files which include the following mode options
BlackberryMode OptionMode PantechMode QuantaMode
Signed-off-by: Julian Labus <julian@labus-online.de>
(cherry picked from commit
b757de65b3c3aa210022c65445df1d6dbbf9eadd)
Felix Fietkau [Tue, 30 May 2017 13:37:10 +0000 (15:37 +0200)]
tar: override symlink permissions
On Linux, symlink permissions cannot be altered and are always 0777.
On Mac OS X they can be 0755. Force 0777 here to keep tarballs
reproducible across systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
e25cedd0b5621dc02e47eea674006578ac062c9f)
Daniel Engberg [Wed, 10 May 2017 09:34:10 +0000 (11:34 +0200)]
tools/sparse: Update to snapshot 2017-03-31
Update sparse to snapshot 2017-03-31
Switch to HTTPS
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit
9235a29e1a9764361940d4b38f4fce0358d8d9ee)
Florian Fainelli [Mon, 22 May 2017 23:08:57 +0000 (16:08 -0700)]
elfutils: Pass -Wno-unused-result to silence warnings as errors
elfutils turns on -Werror by default, and patch 100-musl-compat.patch
changes how strerror_r is used and we no longer use the function's
return value. This causes the following build error/warning to occur
with glibc-based toolchains:
dwfl_error.c: In function 'dwfl_errmsg':
dwfl_error.c:158:18: error: ignoring return value of 'strerror_r',
declared with attribute warn_unused_result [-Werror=unused-result]
strerror_r (error & 0xffff, s, sizeof(s));
^
cc1: all warnings being treated as errors
Fixing this would be tricky as there are two possible signatures for
strerror_r (XSI and GNU), just turn off unused-result warnings instead.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit
484f768dfa295d9fccd82c57cae00458f32b7182)
Felix Fietkau [Wed, 10 May 2017 12:01:54 +0000 (14:01 +0200)]
gcc: fix documentation entries added by 910-mbsd_multi.patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
8851a18a88aff548ae2648e26deb7595ebb45733)
Felix Fietkau [Tue, 9 May 2017 13:20:42 +0000 (15:20 +0200)]
scripts/download.pl: print the command used to download files
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
cbe0a7ecc0b76f4d97d87ca59a0ff8074b8946f4)
Hannu Nyman [Sun, 7 May 2017 17:52:32 +0000 (20:52 +0300)]
tools/libressl: update to 2.5.4
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit
d7a3120cdcc1aeed5a95636803d250e35ba8706e)
Syrone Wong [Sun, 7 May 2017 11:39:12 +0000 (19:39 +0800)]
tools/isl: update to 0.18
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
(cherry picked from commit
a0f4b4b3a2cd4db1a2b9bab3c06970361192368f)
Stijn Tintel [Wed, 24 May 2017 12:56:22 +0000 (14:56 +0200)]
lldpd: bump to 0.9.7
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit
423a7a6b752d4780f7f61722443ed5f4f50e3bda)
Yousong Zhou [Mon, 22 May 2017 02:35:10 +0000 (10:35 +0800)]
libunwind: update to 1.2
Addresses CVE-2015-3239: Off-by-one error in the dwarf_to_unw_regnum
function in include/dwarf_i.h in libunwind 1.1 allows local users to
have unspecified impact via invalid dwarf opcodes.
Upstream stable-v1.2 fixed the missing unwind_i.h issue but no new
tarball is released yet
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit
5d48dc1146171520445c43ee894d9dfce09ae4e2)
Hauke Mehrtens [Sun, 21 May 2017 19:20:44 +0000 (21:20 +0200)]
lantiq: spi: double time out tolerance
The generic SPI code calculates how long the issued transfer would take
and adds 100ms in addition to the timeout as tolerance. On my 500 MHz
Lantiq Mips SoC I am getting timeouts from the SPI like this when the
system boots up:
m25p80 spi32766.4: SPI transfer timed out
blk_update_request: I/O error, dev mtdblock3, sector 2
SQUASHFS error: squashfs_read_data failed to read block 0x6e
After increasing the tolerance for the timeout to 200ms I haven't seen
these SPI transfer time outs any more.
The Lantiq SPI driver in use here has an extra work queue in between,
which gets triggered when the controller send the last word and the
hardware FIFOs used for reading and writing are only 8 words long.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
6153248052b2e067df9596c2d619345261b1d3f7)
Alexandru Ardelean [Fri, 19 May 2017 13:19:20 +0000 (16:19 +0300)]
base-files: fix default procd reload
Bug introduced with
6713694.
I did not count on procd handling reload as mentioned
in this doc:
https://wiki.openwrt.org/inbox/procd-init-scripts
```
procd_set_param file /var/etc/your_service.conf # /etc/init.d/your_service reload will restart the daemon if these files have changed
procd_set_param netdev dev # likewise, except if dev's ifindex changes.
procd_set_param data name=value ... # likewise, except if this data changes.
```
The service would be restarted regardless of any of those params.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit
c7ee30d53af12ea725296cc323f68e8fe04e532c)
Michael Lee [Thu, 27 Apr 2017 01:04:31 +0000 (09:04 +0800)]
ramips: support jumbo frame on mt7621 up to 2k
Signed-off-by: Michael Lee <igvtee@gmail.com>
(cherry picked from commit
eee09bfe01e8cc2db1501f82dde7b9b6bb424faf)
Alexandru Ardelean [Thu, 4 May 2017 11:13:40 +0000 (14:13 +0300)]
lldpd: drop specific respawn params [use system-wide]
I think I added these respawn params [a while back],
when I did the conversion to procd init script format.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(cherry picked from commit
ce8bfa9407bc1518107a99edc8568a59fe269fa5)
Luiz Angelo Daros de Luca [Fri, 5 May 2017 23:05:56 +0000 (20:05 -0300)]
elfutils: bump to 0.169
Removed patches (now upstream):
- 004-maybe-uninitialized.patch
- 007-fix_TEMP_FAILURE_RETRY.patch
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(cherry picked from commit
ccc54b29352a7d30762b84761414aa1798ce1183)
Daniel Engberg [Wed, 10 May 2017 09:19:46 +0000 (11:19 +0200)]
devel/trace-cmd: Update to 2.6.1
Update trace-cmd to version 2.6.1
Switch to tarball download
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit
b295966f8767ff84b55e547ae5c2967772c3ede2)
Giuseppe Lippolis [Tue, 9 May 2017 18:23:35 +0000 (20:23 +0200)]
comgt-3g: enable modem before to setpin
some modems needs to be enabled with CFUN=1 before to set the pin
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
(cherry picked from commit
db776c01e1202307b78a4bb757f78db5ea48e27e)
Daniel Engberg [Sat, 13 May 2017 11:21:11 +0000 (13:21 +0200)]
devel/strace: Update to 4.16
Update strace to 4.16
Refresh patch
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit
4b0a2ca9a47ce30f08161b5b12991f15d590938c)
Daniel Engberg [Sat, 13 May 2017 11:25:16 +0000 (13:25 +0200)]
network/utils/ipset: Update to 6.32
Update ipset to 6.32
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit
ea2927e1eaa321033b28f08db0ec59e7df5f7806)
Jo-Philipp Wich [Sun, 14 May 2017 17:47:07 +0000 (19:47 +0200)]
mac80211: gracefully handle preexisting VIF
Gracefully handle cases where the to-be-created wireless interface already
exists on the system which might commonly happen with non-multi-SSID capable
wireless drivers.
This fixes commit
8301e613655c2d95fa5430a1a57d92d966fdc70b which caused
previously ignored "Too many open files in system (-23)" errors to fail the
wireless setup procedure.
With the updated approach we'll still try recreating the vif after one
second if the first attempt to do so failed with ENFILE but we will now
consider the operation successfull if a second attempt still yields ENFILE
with the requested ifname already existing on the system.
Fixes FS#664, FS#704.
Suggested-by: Vittorio Gambaletta <openwrt@vittgam.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
4a033475453b63d0d5ae41489e7c395882567698)
Florian Fainelli [Tue, 4 Apr 2017 02:04:24 +0000 (19:04 -0700)]
scripts: Probe external toolchains for libthread-db
libthread-db is a package that can be configured for external
toolchains, so let's have the script probe for it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit
6704410b158b47aecf507971ad2ee5e3db840e3a)
Sergey Ryazanov [Sun, 7 May 2017 17:19:13 +0000 (20:19 +0300)]
build: new fixes for symlinked .config handling
When running "make {config|defconfig|oldconfig}" with symlinked .config
(e.g. to env/.config) it renames symlink to .config.old, creates new
.config file, and writes the updated configuration into it.
This breaks the desired workflow when changes in the configuration can
be checked using "scripts/env diff" and commited using "scripts/env
save". Since the env/.config file is not updated.
The things become even worse when working with feeds, since feeds script
quite often silently invokes "make {oldconfig|defconfig}" and breaks the
symlink.
Fix this issue by exporting KCONFIG_OVERWRITECONFIG=1, which forces
mconf to overwrite the .config content, instead of renaming it and
creating a new file. This variable is set only if .config is a symlink,
otherwise the variable is not exported and the old behaviour is
preserved.
This change uses the same behaviour as "make menucofig", which has
already been fixed in commit
5bf98b1acc3b6b178f8954c5075a58e1e6a99d6a.
Also make a tiny cosmetic update to the "make menuconfig" target code
layout to make it look like other config handling targets.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit
e06d8f0f6f041c8ac1acba810eea96c32dc983e4)
Felix Fietkau [Fri, 5 May 2017 11:12:23 +0000 (13:12 +0200)]
build: allow val.% targets to bypass the prepare steps
Significantly reduces time spent processing those targets and should
also silence some log clutter which could confuse buildbot
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
ddbb036bbb8a1030dd8f6fae0004d390b5f2b8a5)
Daniel Golle [Fri, 5 May 2017 03:56:10 +0000 (05:56 +0200)]
x86: keep /boot mounted for kexec
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
63571cb56c7ff2692b5c9aa78133c3f4996e2ac5)
Abhilash Tuse [Thu, 23 Mar 2017 06:04:32 +0000 (11:34 +0530)]
hostapd: fix reload frequency change patch
When sta is configured, hostapd receives 'stop' and 'update' command from
wpa_supplicant. In the update command, hostapd gets sta parameters with
which it configures ap.
Problem is, with the default wireless configuration:
mode:11g freq:2.4GHz channel:1
If sta is connected to 5GHz network, then ap does not work. Ideally with
340-reload_freq_change.patch hostapd should reload the frequency changes
and start ap in 5GHz, but ap becomes invisible in the network.
This issue can be reproduced with following /etc/config/wireless:
config wifi-device radio0
option type mac80211
option channel 1
option hwmode 11g
option path 'virtual/uccp420/uccwlan'
option htmode 'none'
config wifi-iface 'ap'
option device 'radio0'
option encryption 'none'
option mode 'ap'
option network 'ap'
option ssid 'MyTestNet'
option encryption none
config wifi-iface 'sta'
option device radio0
option network sta
option mode sta
option ssid TestNet-5G
option encryption psk2
option key 12345
This change updates current_mode structure based on configured hw_mode
received from wpa_supplicant. Also prepare rates table after frequency
selection.
Signed-off-by: Abhilash Tuse <Abhilash.Tuse@imgtec.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, patch refresh]
(cherry picked from commit
41feba8c4aa33ca3c6fa7c1a6c3224aae02440a7)
Bastian Köcher [Mon, 27 Mar 2017 15:21:12 +0000 (17:21 +0200)]
build: remove absolute path to perl and replace with /usr/bin/env perl
Signed-off-by: Bastian Köcher <git@kchr.de>
(cherry picked from commit
5378c856779c590e26910639e28b95a22aa2b9f5)
Felix Fietkau [Wed, 12 Apr 2017 07:15:38 +0000 (09:15 +0200)]
kernel: allow selecting RTC drivers on targets without explicit RTC support
Keep them disabled by default to avoid pulling in extra kernel bloat
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
5afe9a054cbcb1630a42200f3ac799432522a87d)
Hans Dedecker [Wed, 26 Apr 2017 14:44:02 +0000 (16:44 +0200)]
dropbear: fix procd interface trigger install
Install procd interface triggers only for interfaces which are enabled
so dropbear instances running on (an) enabled interface(s) are not
restarted due to an interface trigger of an interface which is disabled.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit
e5bbead1a83944293fccc27679ba9846d133374e)
Daniel Engberg [Fri, 21 Apr 2017 08:23:20 +0000 (10:23 +0200)]
include/packages-defaults.mk: Remove LARGEFILE option
Remove LARGEFILE option, support was removed back in 2011 (OpenWrt rev 25208).
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit
edda8ecd79b181e338e82331ecb45eaeff0f57af)