Gabor Juhos [Tue, 12 Mar 2013 18:22:33 +0000 (18:22 +0000)]
gemini: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35994
Gabor Juhos [Tue, 12 Mar 2013 18:22:22 +0000 (18:22 +0000)]
gemini: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35993
John Crispin [Tue, 12 Mar 2013 13:53:08 +0000 (13:53 +0000)]
fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 35992
John Crispin [Tue, 12 Mar 2013 13:53:01 +0000 (13:53 +0000)]
ltq-atm: update sock api
update sock api in lantiq atm driver
The ltq-atm driver provides its own replacement for net/atm/common.c:alloc_tx(),
defined in ltq_atm.c:atm_alloc_tx().
The read of sk_wmem_alloc is done in the wrong way, starting with commit
2b85a34e911bf483c27cfdd124aeb1605145dc80 in linux mainline it has to be
done through a specific wrapper.
Signed-off-by: Luca Dariz <luca.dariz@gmail.com>
SVN-Revision: 35991
John Crispin [Tue, 12 Mar 2013 13:52:54 +0000 (13:52 +0000)]
add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35990
John Crispin [Tue, 12 Mar 2013 13:52:47 +0000 (13:52 +0000)]
unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35989
John Crispin [Tue, 12 Mar 2013 13:52:40 +0000 (13:52 +0000)]
make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35988
John Crispin [Tue, 12 Mar 2013 13:52:33 +0000 (13:52 +0000)]
make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35987
John Crispin [Tue, 12 Mar 2013 13:52:20 +0000 (13:52 +0000)]
fixes mbssid on ralink hardware
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35986
Gabor Juhos [Tue, 12 Mar 2013 13:28:33 +0000 (13:28 +0000)]
avr32: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35985
Gabor Juhos [Tue, 12 Mar 2013 13:28:32 +0000 (13:28 +0000)]
avr32: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35984
Gabor Juhos [Tue, 12 Mar 2013 13:28:31 +0000 (13:28 +0000)]
avr32: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35983
Gabor Juhos [Tue, 12 Mar 2013 13:28:27 +0000 (13:28 +0000)]
avr32: add sysupgrade support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35982
Gabor Juhos [Tue, 12 Mar 2013 13:28:23 +0000 (13:28 +0000)]
avr32: add firmware partition
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35981
Gabor Juhos [Tue, 12 Mar 2013 13:28:21 +0000 (13:28 +0000)]
avr32: add diag support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35980
Gabor Juhos [Tue, 12 Mar 2013 13:28:19 +0000 (13:28 +0000)]
avr32: create network config dynamically
The default network configuration from base-files
is not correct for the NGW100 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35979
Gabor Juhos [Tue, 12 Mar 2013 13:28:16 +0000 (13:28 +0000)]
avr32: built the firmware images from the lzma compressed uImage
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35978
Gabor Juhos [Tue, 12 Mar 2013 07:18:37 +0000 (07:18 +0000)]
mpc52xx: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35977
Gabor Juhos [Tue, 12 Mar 2013 07:18:36 +0000 (07:18 +0000)]
mpc52xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35976
Gabor Juhos [Tue, 12 Mar 2013 07:18:34 +0000 (07:18 +0000)]
mpc52xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35975
Felix Fietkau [Tue, 12 Mar 2013 00:19:25 +0000 (00:19 +0000)]
hostapd: fix client reassociation after too many ACK failures
SVN-Revision: 35973
Gabor Juhos [Mon, 11 Mar 2013 21:02:45 +0000 (21:02 +0000)]
ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35972
Gabor Juhos [Mon, 11 Mar 2013 21:02:43 +0000 (21:02 +0000)]
ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35971
Gabor Juhos [Mon, 11 Mar 2013 21:02:40 +0000 (21:02 +0000)]
ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35970
Jo-Philipp Wich [Mon, 11 Mar 2013 20:52:20 +0000 (20:52 +0000)]
firewall3: update to git head
* Fixes compilation against eglibc
* Fixes tracking logic when selectively restarting IPv4 or IPv6 firewall
* Fixes tracking logic for user chains by differentiating between reloads and restarts
* Introduces per-zone user chains {input,output,forwarding,prerouting,postrouting}_$zone_rule
* Supports legacy "tcpudp" protocol notation again
SVN-Revision: 35969
Gabor Juhos [Mon, 11 Mar 2013 19:52:54 +0000 (19:52 +0000)]
ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35966
Gabor Juhos [Mon, 11 Mar 2013 19:52:51 +0000 (19:52 +0000)]
ar71xx: add AR934X_GPIO_FUNC_* defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35965
Gabor Juhos [Mon, 11 Mar 2013 15:55:25 +0000 (15:55 +0000)]
ar71xx: makefile changes to build image for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35964
Gabor Juhos [Mon, 11 Mar 2013 15:55:23 +0000 (15:55 +0000)]
firmware-utils/mktplinkfw: Add support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35963
Gabor Juhos [Mon, 11 Mar 2013 15:55:22 +0000 (15:55 +0000)]
ar71xx: add user-space support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35962
Gabor Juhos [Mon, 11 Mar 2013 15:55:20 +0000 (15:55 +0000)]
ar71xx: add kernel support for MR3420v2
[juhosg: use gpio_request_one to enable the USB power]
Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>
SVN-Revision: 35961
Gabor Juhos [Mon, 11 Mar 2013 15:55:19 +0000 (15:55 +0000)]
ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35960
Gabor Juhos [Mon, 11 Mar 2013 15:55:17 +0000 (15:55 +0000)]
ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35959
Gabor Juhos [Mon, 11 Mar 2013 15:55:15 +0000 (15:55 +0000)]
ar71xx: add user space support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35958
Gabor Juhos [Mon, 11 Mar 2013 15:55:13 +0000 (15:55 +0000)]
ar71xx: add kernel support for dir-835-a1
[juhosg:
- remove custom mdio bus info and platform data for ar8327, clear the
.led_cfg field from dir835a1_setup instead,
- remove arguments of dir835c1_generic_setup function, register the
LEDs directly from the board specific setup instead]
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35957
Felix Fietkau [Mon, 11 Mar 2013 02:29:53 +0000 (02:29 +0000)]
cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
SVN-Revision: 35953
Felix Fietkau [Mon, 11 Mar 2013 02:29:47 +0000 (02:29 +0000)]
cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
SVN-Revision: 35952
Felix Fietkau [Sun, 10 Mar 2013 21:59:32 +0000 (21:59 +0000)]
cns3xxx: increase number of ethernet driver rx buffers
SVN-Revision: 35951
Felix Fietkau [Sun, 10 Mar 2013 21:59:28 +0000 (21:59 +0000)]
cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
SVN-Revision: 35950
Felix Fietkau [Sun, 10 Mar 2013 21:59:21 +0000 (21:59 +0000)]
cns3xxx: minor ethernet driver cleanup
SVN-Revision: 35949
Hauke Mehrtens [Sun, 10 Mar 2013 20:42:26 +0000 (20:42 +0000)]
brcm47xx: refresh config
SVN-Revision: 35948
Hauke Mehrtens [Sun, 10 Mar 2013 20:26:28 +0000 (20:26 +0000)]
xburst: fix compilation: remove the __dev attributes
SVN-Revision: 35946
Hauke Mehrtens [Sun, 10 Mar 2013 20:25:19 +0000 (20:25 +0000)]
kernel: add some missing config options found by the buildbot.
SVN-Revision: 35945
Hauke Mehrtens [Sun, 10 Mar 2013 20:24:15 +0000 (20:24 +0000)]
mac80211: b43: increase number of rx slots to 256 again.
SVN-Revision: 35944
Felix Fietkau [Sun, 10 Mar 2013 18:25:20 +0000 (18:25 +0000)]
cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
SVN-Revision: 35943
Felix Fietkau [Sun, 10 Mar 2013 18:25:16 +0000 (18:25 +0000)]
cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.
SVN-Revision: 35942
Felix Fietkau [Sun, 10 Mar 2013 18:25:11 +0000 (18:25 +0000)]
cns3xxx: fix ethernet driver memory barrier usage
SVN-Revision: 35941
Gabor Juhos [Sun, 10 Mar 2013 18:06:31 +0000 (18:06 +0000)]
realview: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35940
Gabor Juhos [Sun, 10 Mar 2013 18:06:29 +0000 (18:06 +0000)]
realview: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35939
Felix Fietkau [Sun, 10 Mar 2013 17:04:36 +0000 (17:04 +0000)]
kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
SVN-Revision: 35938
Felix Fietkau [Sun, 10 Mar 2013 17:04:31 +0000 (17:04 +0000)]
kernel: ensure that the arm exception handlers get preserved
SVN-Revision: 35937
Felix Fietkau [Sun, 10 Mar 2013 14:51:42 +0000 (14:51 +0000)]
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
SVN-Revision: 35936
Felix Fietkau [Sun, 10 Mar 2013 14:51:38 +0000 (14:51 +0000)]
kernel: remove the BROKEN dependency on the kernel export symbol strip
SVN-Revision: 35935
Gabor Juhos [Sun, 10 Mar 2013 13:24:54 +0000 (13:24 +0000)]
xburst: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35934
Gabor Juhos [Sun, 10 Mar 2013 13:24:52 +0000 (13:24 +0000)]
xburst: switch to 3.8
Compile tested only, so add broken flag.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35933
Gabor Juhos [Sun, 10 Mar 2013 13:24:50 +0000 (13:24 +0000)]
xburst: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35932
Gabor Juhos [Sun, 10 Mar 2013 13:24:47 +0000 (13:24 +0000)]
linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35931
Gabor Juhos [Sun, 10 Mar 2013 13:24:46 +0000 (13:24 +0000)]
adm5120: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35930
Gabor Juhos [Sun, 10 Mar 2013 13:24:45 +0000 (13:24 +0000)]
adm5120: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35929
Gabor Juhos [Sun, 10 Mar 2013 13:24:44 +0000 (13:24 +0000)]
malta: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35928
Gabor Juhos [Sun, 10 Mar 2013 13:24:43 +0000 (13:24 +0000)]
malta: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35927
Gabor Juhos [Sun, 10 Mar 2013 13:24:42 +0000 (13:24 +0000)]
atheros: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35926
Gabor Juhos [Sun, 10 Mar 2013 13:24:40 +0000 (13:24 +0000)]
atheros: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35925
Gabor Juhos [Sun, 10 Mar 2013 13:24:39 +0000 (13:24 +0000)]
mpc83xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35924
Gabor Juhos [Sun, 10 Mar 2013 13:24:38 +0000 (13:24 +0000)]
mpc83xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35923
Gabor Juhos [Sun, 10 Mar 2013 13:21:40 +0000 (13:21 +0000)]
rb532: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35922
Gabor Juhos [Sun, 10 Mar 2013 13:21:33 +0000 (13:21 +0000)]
rb532: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35921
Gabor Juhos [Sun, 10 Mar 2013 13:21:29 +0000 (13:21 +0000)]
rb532: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35920
Gabor Juhos [Sun, 10 Mar 2013 07:20:57 +0000 (07:20 +0000)]
ar71xx: correct board name to make LEDs work on RB750
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35919
Gabor Juhos [Sun, 10 Mar 2013 07:20:54 +0000 (07:20 +0000)]
ppc40x: remove __dev_{in,ex}it annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35918
Felix Fietkau [Sun, 10 Mar 2013 01:27:04 +0000 (01:27 +0000)]
cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
SVN-Revision: 35917
Felix Fietkau [Sun, 10 Mar 2013 01:01:55 +0000 (01:01 +0000)]
cns3xxx: remove linux 3.3 support
SVN-Revision: 35916
Felix Fietkau [Sun, 10 Mar 2013 01:01:51 +0000 (01:01 +0000)]
cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance)
SVN-Revision: 35915
Hauke Mehrtens [Sat, 9 Mar 2013 20:01:55 +0000 (20:01 +0000)]
mac80211: decrease rx slots to 128, I hope this is a good trade of between stability and memory consumption.
SVN-Revision: 35913
Hauke Mehrtens [Sat, 9 Mar 2013 19:48:03 +0000 (19:48 +0000)]
brcm47xx: add some more partition parser fixes by Rafał Miłecki
SVN-Revision: 35912
Hauke Mehrtens [Sat, 9 Mar 2013 19:24:43 +0000 (19:24 +0000)]
brcm47xx: netconfig: add bacis support for swconfig
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.
SVN-Revision: 35911
Felix Fietkau [Sat, 9 Mar 2013 19:04:37 +0000 (19:04 +0000)]
kernel: add a missing config symbol for 3.8
SVN-Revision: 35910
Felix Fietkau [Sat, 9 Mar 2013 19:00:39 +0000 (19:00 +0000)]
mkimage: unbreak build on non-linux systems
SVN-Revision: 35909
Felix Fietkau [Sat, 9 Mar 2013 18:51:46 +0000 (18:51 +0000)]
cns3xxx: add linux 3.8 support and use it by default
SVN-Revision: 35908
Felix Fietkau [Sat, 9 Mar 2013 18:51:39 +0000 (18:51 +0000)]
kernel: fix mpcore watchdog symbol export
SVN-Revision: 35907
Luka Perkov [Fri, 8 Mar 2013 20:16:11 +0000 (20:16 +0000)]
mkimage: upgrade to version 2013.01.01
SVN-Revision: 35905
Jo-Philipp Wich [Fri, 8 Mar 2013 19:52:18 +0000 (19:52 +0000)]
Revert "firewall3: update to git head"
This reverts commit
89969fa333c90fdb217b7289272f3427add107de.
SVN-Revision: 35904
Jo-Philipp Wich [Fri, 8 Mar 2013 15:27:33 +0000 (15:27 +0000)]
firewall3: update to git head
- introduce per-zone user chains
- support legacy "tcpudp" protocol notation
SVN-Revision: 35903
Steven Barth [Fri, 8 Mar 2013 07:04:38 +0000 (07:04 +0000)]
odhcp6c: various bugfixes * Don't prematurely send RENEW / REBIND when T1 or T2 is > 1 day * Add "norelease" option to not send a RELEASE when stopping
SVN-Revision: 35902
Felix Fietkau [Thu, 7 Mar 2013 17:32:29 +0000 (17:32 +0000)]
build: BSD compile fixes
following patch allows to build images for Qemu ARM on
OpenBSD 5.2 amd64 and FreeBSD 9.1 amd64.
Mostly small pieces of code changes to get things right on the
specific platform.
Updated the README to describe better, which tools on the host
are required. Added some kind of prepare scripts to install needed
tools on BSD via packages.
Signed-off-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
SVN-Revision: 35900
Steven Barth [Thu, 7 Mar 2013 09:30:52 +0000 (09:30 +0000)]
netfilter: Fix typo in last commit
SVN-Revision: 35899
Steven Barth [Thu, 7 Mar 2013 08:48:41 +0000 (08:48 +0000)]
iptables: Add missing IPv6 builtin modules
SVN-Revision: 35898
Steven Barth [Wed, 6 Mar 2013 17:05:34 +0000 (17:05 +0000)]
iptables: redo update to 1.4.18 with old linking-behaviour
SVN-Revision: 35896
Mirko Vogt [Wed, 6 Mar 2013 13:29:29 +0000 (13:29 +0000)]
Update README file
Append '-a' to "scripts/feeds {update,install}" example calls.
SVN-Revision: 35895
Steven Barth [Wed, 6 Mar 2013 12:55:48 +0000 (12:55 +0000)]
Revert "iptables: update to 1.4.18" due to toolchain-issue: binaries cause segfaults when stripped on ar71xx
SVN-Revision: 35894
Felix Fietkau [Tue, 5 Mar 2013 22:06:30 +0000 (22:06 +0000)]
hostapd: include the madwifi headers in the package directory to avoid compile breakage if the madwifi build fails
SVN-Revision: 35893
Steven Barth [Tue, 5 Mar 2013 20:51:57 +0000 (20:51 +0000)]
iptables: update to 1.4.18
SVN-Revision: 35892
Felix Fietkau [Tue, 5 Mar 2013 14:32:31 +0000 (14:32 +0000)]
mac80211: add another minstrel_ht performance improvement
SVN-Revision: 35890
Jo-Philipp Wich [Tue, 5 Mar 2013 13:45:09 +0000 (13:45 +0000)]
firewall3: add default config and firewall.user
SVN-Revision: 35889
Jo-Philipp Wich [Tue, 5 Mar 2013 13:41:56 +0000 (13:41 +0000)]
include: make firewall3 the default
SVN-Revision: 35888
Felix Fietkau [Mon, 4 Mar 2013 17:16:38 +0000 (17:16 +0000)]
hostapd: update to git version 2013-03-02
SVN-Revision: 35887
Gabor Juhos [Mon, 4 Mar 2013 16:08:41 +0000 (16:08 +0000)]
cns21xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35886
Gabor Juhos [Mon, 4 Mar 2013 16:08:39 +0000 (16:08 +0000)]
cns21xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35885
Gabor Juhos [Mon, 4 Mar 2013 15:16:37 +0000 (15:16 +0000)]
ppc44x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35884
Gabor Juhos [Mon, 4 Mar 2013 15:16:35 +0000 (15:16 +0000)]
ppc44x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35883
projects / openwrt / staging / wigyori.git / log