Jo-Philipp Wich [Wed, 27 May 2015 15:04:02 +0000 (15:04 +0000)]
brcm47xx: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45779
Jo-Philipp Wich [Wed, 27 May 2015 14:57:38 +0000 (14:57 +0000)]
arm64: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45778
Felix Fietkau [Wed, 27 May 2015 14:56:22 +0000 (14:56 +0000)]
ramips: check size after padding
Signed-off-by: Cristian Morales Vega <cristian@samknows.com>
SVN-Revision: 45777
Felix Fietkau [Wed, 27 May 2015 14:56:13 +0000 (14:56 +0000)]
kirkwood: disable TSO on the ethernet device by default, fixes data corruption issues (#19735)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45776
Jo-Philipp Wich [Wed, 27 May 2015 14:53:25 +0000 (14:53 +0000)]
ar7: use common image prefix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45775
Rafał Miłecki [Wed, 27 May 2015 13:54:19 +0000 (13:54 +0000)]
brcm47xx: build image for Asus RT-N66U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45774
Rafał Miłecki [Wed, 27 May 2015 13:54:02 +0000 (13:54 +0000)]
firmware-utils: asustrx: new tool for TRX format with Asus tail
Asus devices use TRX format with some extra data at the end.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45773
Jo-Philipp Wich [Wed, 27 May 2015 11:22:20 +0000 (11:22 +0000)]
IB: use online repositories
Change the IB packaging to only embed libc, kernel and kmod packages by default
and generate repositories.conf to refer to the remote package repositories.
Introduce a new config option CONFIG_IB_STANDALONE which restores the old
behaviour of building self contained IB archives.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45772
Jo-Philipp Wich [Wed, 27 May 2015 08:29:10 +0000 (08:29 +0000)]
scripts: ensure that ipkg-make-index.sh exits successfully
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45771
Steven Barth [Tue, 26 May 2015 14:36:20 +0000 (14:36 +0000)]
map: add support for lw4o6 address matching, minor optimizations
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45770
Imre Kaloz [Tue, 26 May 2015 13:24:46 +0000 (13:24 +0000)]
mwlwifi: upgrade to 10.3.0.1-
20150525
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45769
Steven Barth [Tue, 26 May 2015 12:48:12 +0000 (12:48 +0000)]
netifd: fix and optimize ipv6 onlink-route handling
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45768
Rafał Miłecki [Tue, 26 May 2015 12:14:34 +0000 (12:14 +0000)]
mac80211: backport today's brcmfmac changes
It should improve msgbuf throughput (PCIe devices like BCM43602).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45767
Jo-Philipp Wich [Tue, 26 May 2015 11:50:04 +0000 (11:50 +0000)]
iwinfo: fix hostapd status query (#19662)
* Rework hostapd and wpa_supplicant status parsing code
* Add support for querying available HT rates
* Relax definition of restricted channels
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45766
Jo-Philipp Wich [Tue, 26 May 2015 11:37:05 +0000 (11:37 +0000)]
build: trigger pacakge index creation for all feeds if required
When CONFIG_PER_FEED_REPO_ADD_DISABLED is set, trigger index creation for
any available feed, regardless of whether there where binaries built or not.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45765
Jo-Philipp Wich [Tue, 26 May 2015 11:11:48 +0000 (11:11 +0000)]
firewall: link iptables extensions dynamically
Use shared libipt{,4,6}ext.so libraries instead of statically linking
the userspace matches into the fw3 executable.
As a side effect the match initialization is extremely simplified
compared to the weak function pointer juggling performed before.
This also fixes the initialization of the multiport match.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45764
Imre Kaloz [Tue, 26 May 2015 09:31:39 +0000 (09:31 +0000)]
mvebu: update Linux 4.0 patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45762
Imre Kaloz [Tue, 26 May 2015 09:31:16 +0000 (09:31 +0000)]
generic/4.0: update to 4.0.4
Update kernel sources and refresh some patches.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45761
Imre Kaloz [Tue, 26 May 2015 09:25:30 +0000 (09:25 +0000)]
tools/mtd-utils: upgrade to latest git
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45760
Jo-Philipp Wich [Tue, 26 May 2015 09:17:13 +0000 (09:17 +0000)]
include: clean package staging dir files before configure
This is required to allow packages to ship libraries with a different API.
Previously the linker would favor the old shared libraries in STAGING_DIR
instead of the just compiled ones in PKG_BUILD_DIR.
Avoid that problem by clearing the package staging files right after
prepare.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45759
Jo-Philipp Wich [Tue, 26 May 2015 09:16:50 +0000 (09:16 +0000)]
iptables: reduce binary size
* drop unused lenient restore patch
* instead of statically linking core extensions, build shared libraries
for reuse in fw3
* strip outdated match revisions and aliases to trim down library size
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45758
Felix Fietkau [Tue, 26 May 2015 09:09:07 +0000 (09:09 +0000)]
build: allow creating empty package feeds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45757
Felix Fietkau [Tue, 26 May 2015 07:13:40 +0000 (07:13 +0000)]
ar71xx: fix tl-wr710n images (#19692)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45756
Felix Fietkau [Tue, 26 May 2015 07:02:49 +0000 (07:02 +0000)]
ppp: do not warn if connect() before close() on pppoe terminate fails (fixes #19651)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45755
Felix Fietkau [Mon, 25 May 2015 23:11:01 +0000 (23:11 +0000)]
musl: update to version 1.1.9
Patch to 2015-05-25 to fix ldso related regressions on PPC and MIPS.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45754
Felix Fietkau [Mon, 25 May 2015 22:59:15 +0000 (22:59 +0000)]
kirkwood: disable the bogus CONFIG_IP_ADVANCED_ROUTER override (#19722)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45753
Felix Fietkau [Mon, 25 May 2015 22:59:04 +0000 (22:59 +0000)]
uClibc: elf: Add STT_GNU_IFUNC from glibc
perf in upstream Linux kernel 3.17 onwards expects STT_GNU_IFUNC
replicate it from glibc
Patch cherry-picked from:
http://lists.busybox.net/pipermail/uclibc/2015-February/048825.html
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45752
Felix Fietkau [Mon, 25 May 2015 22:00:06 +0000 (22:00 +0000)]
fstools: update to the latest version, makes filesystem initialization state tracking more reliable (#19564)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45751
Felix Fietkau [Mon, 25 May 2015 21:15:42 +0000 (21:15 +0000)]
ubus: update to the latest version, switch to git.openwrt.org, fixes a lua binding memory leak
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45750
Felix Fietkau [Mon, 25 May 2015 21:15:37 +0000 (21:15 +0000)]
mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig
Currently port 6 is shown as up 10MBit/half in LUCI and swconfig.
Reason is that all bits in the port 6 config are zero.
This means that also the aneg flag is not set and in this case
ar8216_read_port_link hardcodes the link to be up.
This is no real problem but a little annoying.
To fix this initialize port 6 with the aneg bit enabled.
This causes ar8216_read_port_link to evaluate the link status bit which is
always zero for port 6 as no PHY is connected to this port.
And it doesn't hurt as port 6 isn't connected to anything on TL-WDR4900.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 45749
Felix Fietkau [Mon, 25 May 2015 21:15:31 +0000 (21:15 +0000)]
netifd: bump to current HEAD
This introduces a new config parameter "no-proto-task" useful for
xl2tpd.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45748
Jonas Gorski [Mon, 25 May 2015 18:02:32 +0000 (18:02 +0000)]
ramips: fix hang on boot on rt305x
Fix an upstream regression on 3.18+ that causes rt305x based devices
to hang on boot.
Fixes #19715.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45747
Jonas Gorski [Mon, 25 May 2015 08:27:55 +0000 (08:27 +0000)]
image.mk: make image too big warnings more visible
Output warnings through stderr to allow them to be easilier spotted
when building with V=w.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45746
Nicolas Thill [Sun, 24 May 2015 19:15:54 +0000 (19:15 +0000)]
gdb: disable liblzma explictly
* fix build failure when gdb is build after liblzma
* bump release number
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45745
Nicolas Thill [Sun, 24 May 2015 17:56:26 +0000 (17:56 +0000)]
fuse: fix exec environment for mount and umount
* add upstream patch (CVE-2015-3202)
* refresh patches
* bump release number
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45744
Nicolas Thill [Sun, 24 May 2015 01:55:14 +0000 (01:55 +0000)]
package/kernel: remove reference to ep93xx target
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45743
Nicolas Thill [Sun, 24 May 2015 01:48:52 +0000 (01:48 +0000)]
package/kernel: remove reference to 3.12 kernel version
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45742
John Crispin [Sat, 23 May 2015 15:29:46 +0000 (15:29 +0000)]
comgt: the package contained too many files
fixes #19698
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45741
John Crispin [Sat, 23 May 2015 15:29:31 +0000 (15:29 +0000)]
fuse: fix build on arm64
error:
../include/fuse_kernel.h:93:15: error: conflicting types for 'int64_t'
../include/fuse_kernel.h:92:15: error: conflicting types for 'uint64_t'
reported by buildbot
fix by adopting upstream patch:
http://git.baserock.org/cgi-bin/cgit.cgi/delta/fuse.git/commit/include/fuse_kernel.h?id=
914871b20a901e3e1e981c92bc42b1c93b7ab81b
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45740
John Crispin [Sat, 23 May 2015 15:29:20 +0000 (15:29 +0000)]
w1-gpio-custom: Fix uninitialised variable causing 1-wire to not bind to GPIO
Signed-off-by: Andrew McDonnell <bugs@andrewmcdonnell.net>
SVN-Revision: 45739
John Crispin [Sat, 23 May 2015 15:29:06 +0000 (15:29 +0000)]
scripts/feeds: Delete package/feeds folder in the clean procedure to prevent dangling links.
Hello,
if you run:
./scripts/feeds clean
It removes ./feeds folder but not ./package/feeds/ which is full of dangling links then. This patch fixes it.
Best Regards,
Martin Strbačka
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
SVN-Revision: 45738
John Crispin [Sat, 23 May 2015 15:28:56 +0000 (15:28 +0000)]
conntrack-tools: add init script for conntrackd
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 45737
John Crispin [Sat, 23 May 2015 15:28:42 +0000 (15:28 +0000)]
Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean
Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean
Openwrt's top level Makefile uses STAGING_DIR_TOOLCHAIN in the make dirclean
statement.
https://dev.openwrt.org/browser/trunk/Makefile#L55
rm -rf $(STAGING_DIR) $(STAGING_DIR_HOST) $(STAGING_DIR_TOOLCHAIN)
$(TOOLCHAIN_DIR) $(BUILD_DIR_HOST) $(BUILD_DIR_TOOLCHAIN)
As far as I can determine, no such variable has been defined. I made a search
in Openwrt source repository and the one line in Makefile's dirclean command
is the only place where that variable exists.
The item has been introduced to Makefile by r8362, but even at that time
neither Makefile nor rules.mk defined such a variable. Most likely the goal
has been to set both staging_dir/toolchain and build_dir/toolchain to be
cleaned, but one of the variables has been erroneous. The correct variable
for build_dir/toolchain has been then added by r13494.
References:
https://dev.openwrt.org/changeset/8362/
https://dev.openwrt.org/browser/trunk/Makefile?rev=8362
https://dev.openwrt.org/browser/trunk/rules.mk?rev=8362
https://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html
https://dev.openwrt.org/changeset/13494
In current code,
TOOLCHAIN_DIR = $(TOPDIR)/staging_dir/$(TOOLCHAIN_DIR_NAME)
BUILD_DIR_TOOLCHAIN = $(TOPDIR)/build_dir/$(TOOLCHAIN_DIR_NAME)
so the item STAGING_DIR_TOOLCHAIN in the rm command is unnecessary.
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45736
John Crispin [Sat, 23 May 2015 15:28:36 +0000 (15:28 +0000)]
modules/sound: cleanup by removing unsupported Kernel cases
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45735
John Crispin [Sat, 23 May 2015 15:28:32 +0000 (15:28 +0000)]
modules/usb: another cleanup: remove ancient module names
modules relating to CONFIG_USB_AUDIO
Kernel <2.6.35 is not supported in trunk
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45734
John Crispin [Sat, 23 May 2015 15:28:26 +0000 (15:28 +0000)]
modules/usb: cleanup remove old module names
delete cases for Kernel <3.10 (nop-usb-xceiv), <3.12 (phy-nop)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45733
John Crispin [Sat, 23 May 2015 15:28:20 +0000 (15:28 +0000)]
octeon: build squashfs image for UBNT ERLITE
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 45732
John Crispin [Sat, 23 May 2015 15:28:11 +0000 (15:28 +0000)]
ipq806x: enable cpu idle support in kernel conf
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45731
John Crispin [Sat, 23 May 2015 15:28:02 +0000 (15:28 +0000)]
ipq806x: add & enable cpufreq support
This change set enables frequency scaling on ipq806x, which speeds-up
the CPU and allows it to achieve its max frequency.
These patches are cherry-picked & backported from the following location:
*130-132: linux-next
*133-143: LKML - https://lkml.org/lkml/2015/3/21/15
*144: derived from other qcom similar dts
*145: derived from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/drivers/cpufreq/cpufreq-krait.c
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45730
John Crispin [Sat, 23 May 2015 15:27:54 +0000 (15:27 +0000)]
ipq806x: add power regulators support
Patches are cherry-picked from linux-next. We're also adding the
corresponding config option to the kernel.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45729
John Crispin [Sat, 23 May 2015 15:27:45 +0000 (15:27 +0000)]
ipq806x: disable i2c device on gsbi4
Patch cherry-picked from the following location:
https://chromium-review.googlesource.com/#/c/269931/
Disable the i2c device on gsbi4 and mark gsbi4_h and gsbi4_qup clks as
unused. If they are enabled, clock framework will turn them off at end
of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4
are meant for RPM usage. So turning them off in kernel is incorrect.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45728
John Crispin [Sat, 23 May 2015 15:27:28 +0000 (15:27 +0000)]
ipq806x: refresh kernel patches
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45727
John Crispin [Sat, 23 May 2015 15:27:22 +0000 (15:27 +0000)]
ar71xx: Add support for the Meraki MR12 & MR16
This patch is to add support for the Meraki MR12 and MR16 Access Points.
Currently everything is working, minus the 2nd NIC interface on the MR12
which is built into the SoC.
Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>
SVN-Revision: 45726
John Crispin [Sat, 23 May 2015 15:27:10 +0000 (15:27 +0000)]
rampis: add support for status led on ASUS RT-N14U
The diag.sh script lacked an entry for the status led on the RT-N14U,
map it to the asus:blue:power led which is also used by the boot loader
to report boot status (eg. TFTP recovery mode VS normal boot)
Signed-off-by: Matteo Panella <m.panella@level28.org>
SVN-Revision: 45725
John Crispin [Sat, 23 May 2015 15:27:05 +0000 (15:27 +0000)]
ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router
MR-102N is a RT3050F based wireless router(32M RAM + 8M NOR flash) with 1 USB
and 1 ethernet port. The original product information can be found at:
http://www.aximcom.com/en/MR-102N
Signed-off-by: Tai-hwa Liang <atliang@gmail.com>
SVN-Revision: 45724
John Crispin [Sat, 23 May 2015 15:26:51 +0000 (15:26 +0000)]
ramips: fix switch names for several boards in device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45723
John Crispin [Sat, 23 May 2015 15:26:39 +0000 (15:26 +0000)]
ramips: add support for Comfast CF-WR800N
This patch adds support for Comfast CF-WR800N, a wall-plug wireless router
based on the MT7620N SoC with one Ethernet port and a 802.11n 2.4 GHz radio.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45722
John Crispin [Sat, 23 May 2015 15:26:29 +0000 (15:26 +0000)]
ubox: various logd cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45721
John Crispin [Sat, 23 May 2015 15:26:19 +0000 (15:26 +0000)]
uClibc: add signal info for seccomp related SIGSYS
uClibc doesn't define signal info for the SIGSYS signal which is issued
in case of hitting a syscall prohibited by seccomp.
This is sad as it makes debugging seccomp filter policies impossible on
some architectures (at least ARM and PowerPC, maybe also others) which
do not coincidentally set si_value.sival_int as the syscall number.
To fix this, import the definitions and macros needed from glibc.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45720
John Crispin [Sat, 23 May 2015 15:26:09 +0000 (15:26 +0000)]
procd: make the jail code also work on arm
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45719
John Crispin [Sat, 23 May 2015 15:25:59 +0000 (15:25 +0000)]
lantiq: Fix initialization of the PCI IRQs when PCIe is also enabled
There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in
ifxmips_pcie.c. Instead of defining a new hook we simply re-use the
existing ones (this is basically what the lantiq BSP code does).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45718
John Crispin [Sat, 23 May 2015 15:25:51 +0000 (15:25 +0000)]
lantiq: Fix PCIe bus when PCI is also enabled.
The PCIe bus seems to require a hack/workaround when PCI is enabled as
well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is
only defined in lantiq's BSP code. The config symbol for the upstream
lantiq PCI driver is CONFIG_PCI_LANTIQ.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45717
Hauke Mehrtens [Sat, 23 May 2015 14:54:44 +0000 (14:54 +0000)]
bcm53xx: add OHCI (USB 1.1) support
There is also a OHCI controller, activate it for USB 1.1 support.
This should close #19601.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45716
Jonas Gorski [Fri, 22 May 2015 22:51:37 +0000 (22:51 +0000)]
arm64: enable new errata backported to 3.18
3.18.13 introduced a bunch of new errata, enable them to be on the
safe side.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45715
Jonas Gorski [Fri, 22 May 2015 22:51:34 +0000 (22:51 +0000)]
kernel: add missing generic config symbol
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45714
Florian Fainelli [Fri, 22 May 2015 22:33:41 +0000 (22:33 +0000)]
tools: gengetopt: Disable doc and tests builds
Simply disable the build of the "doc" and "tests" directories to speed up the
build and avoid the potential for errors coming from external tools being used
(e.g: source-highlight installed on a non-standard location).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45713
Jonas Gorski [Fri, 22 May 2015 10:24:30 +0000 (10:24 +0000)]
ds-lite: fix resolve retry for fqdn peeraddrs
If the first resolveip call will fail, peeraddr will be now empty, and
the subsequent resolveip call will try to resolve an empty string.
Fix this by storing the result in a temporary variable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45712
Jonas Gorski [Thu, 21 May 2015 19:32:46 +0000 (19:32 +0000)]
kernel: update 3.18 to 3.18.14
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14
Build tested on brcm63xx and ipq806x, runtested on brcm63xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45711
Jonas Gorski [Thu, 21 May 2015 19:32:16 +0000 (19:32 +0000)]
mac80211: make it work with 3.18.12+
3.18.12 backported
61ada528dea028331e99e8ceaed87c683ad25de2 ("sched/wait:
Provide infrastructure to deal with nested blocking") from 3.19, causing
the following error on load:
[ 13.588000] compat: exports duplicate symbol woken_wake_function (owned by kernel)
Fix this by guarding it with a check for 3.18.11 or earlier instead of
3.19.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45710
Jonas Gorski [Thu, 21 May 2015 19:32:00 +0000 (19:32 +0000)]
brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1
Add it to the appropriate places so the power led properly works
and ethernet is properly configured for failsafe.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45709
Jonas Gorski [Thu, 21 May 2015 19:31:54 +0000 (19:31 +0000)]
brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b.
Nothing much special in this router, it's just another BCM6368 with
a Ralink RT3062 wifi chip and the calibration data embedded in the
main flash chip at offset 0x7c0000. There is also configuration data
used by the OEM firmware before the cal_data partition, this area is
protected by the board_data partition in this patch.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45708
Steven Barth [Thu, 21 May 2015 15:07:54 +0000 (15:07 +0000)]
odhcpd: fix DHCPv6 downstream PD
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45707
Steven Barth [Wed, 20 May 2015 19:23:33 +0000 (19:23 +0000)]
generic/4.0: fix error during kernel patch application
Commit
5168c9a5702648eb690d32ec821647aca80aeba9 introduced a regression
during patch application on the 4.0 kernel. Some of the patched content
doesn't match the actual code, therefore leading to the following error:
Applying patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch
patching file net/ipv6/ip6_output.c
Hunk #1 FAILED at 886.
1 out of 1 hunk FAILED -- rejects in file net/ipv6/ip6_output.c
patching file net/ipv6/route.c
Hunk #1 succeeded at 2247 (offset 2 lines).
Patch generic/667-ipv6-Fixed-source-specific-default-route-handling.patch does not apply (enforce with -f)
This change just adapts the actual patch to fix what is in kernel 4.0
and make it apply cleanly.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45705
Imre Kaloz [Tue, 19 May 2015 22:54:05 +0000 (22:54 +0000)]
mvebu: supress useless in-cpu rtc init on the Mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45704
Hauke Mehrtens [Tue, 19 May 2015 22:17:16 +0000 (22:17 +0000)]
tools/mkimage: backport gcc5 compatibility, patch
Fedora 22 includes gcc5 by default
build leads to error:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc5.h: No such file or directory
backport upstream patch: "Add linux/compiler-gcc5.h to fix builds with gcc5"
id:
478b02f1a7043b673565075ea5016376f3293b23
Issue was reported at
https://forum.openwrt.org/viewtopic.php?id=56853
& replicated in a VM
created, flashed and tested ar71xx image successfully
as test
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45703
Jonas Gorski [Tue, 19 May 2015 09:13:17 +0000 (09:13 +0000)]
base-files: fix default pre-/postrm for packages with a dot
Instead of stripping everything after the first dot, strip everything
after the last dot.
This fixes pre-/postrm actions for packages with a dot in their name,
like libusb-1.0.
Fixes #19668.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45702
Steven Barth [Tue, 19 May 2015 09:01:34 +0000 (09:01 +0000)]
netifd: improve IPv6 onlink-route handling
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45701
Steven Barth [Tue, 19 May 2015 07:53:08 +0000 (07:53 +0000)]
ipv6: remove now unneeded source-dest-routing workarounds
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45700
Steven Barth [Tue, 19 May 2015 07:43:59 +0000 (07:43 +0000)]
linux: backport IPv6 SAS fixes for source-specific routes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45699
Jo-Philipp Wich [Sun, 17 May 2015 12:16:27 +0000 (12:16 +0000)]
rpcd: unload package after uci reverts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45695
Rafał Miłecki [Sun, 17 May 2015 12:10:38 +0000 (12:10 +0000)]
bcm53xx: add Asus RT-AC87U partitioning hacky workaround
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45694
Steven Barth [Sun, 17 May 2015 08:06:45 +0000 (08:06 +0000)]
dnsmasq: bump to dnsmasq2.73rc8 Important.
Bump dnsmasq to v2.73rc8
Important - fixes remotely exploitable buffer overflow introduced in all v2.73 test/release candidates.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 45693
Rafał Miłecki [Sat, 16 May 2015 17:14:25 +0000 (17:14 +0000)]
bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).
One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45692
Rafał Miłecki [Sat, 16 May 2015 15:44:00 +0000 (15:44 +0000)]
bcm53xx: use backported Asus RT-AC87U DT patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45691
Rafał Miłecki [Sat, 16 May 2015 11:45:52 +0000 (11:45 +0000)]
bcm53xx: enable RT-AC87U UART console
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 45690
Steven Barth [Sat, 16 May 2015 10:12:15 +0000 (10:12 +0000)]
map: set ealen to psidlen for lw4over6
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45689
Steven Barth [Sat, 16 May 2015 07:29:42 +0000 (07:29 +0000)]
odhcp6c: fix parsing of LW4over6 parameters
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45688
Rafał Miłecki [Wed, 13 May 2015 20:01:15 +0000 (20:01 +0000)]
bcm53xx: add support for SmartRG SR400ac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45686
Rafał Miłecki [Wed, 13 May 2015 20:01:03 +0000 (20:01 +0000)]
bcm53xx: replace DT patches with backports from stblinux
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45685
Rafał Miłecki [Wed, 13 May 2015 14:34:23 +0000 (14:34 +0000)]
bcm53xx: use of_machine_is_compatible helper in b53 fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45684
Rafał Miłecki [Wed, 13 May 2015 13:12:57 +0000 (13:12 +0000)]
bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45683
Rafał Miłecki [Wed, 13 May 2015 13:11:17 +0000 (13:11 +0000)]
bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45682
Rafał Miłecki [Wed, 13 May 2015 13:11:04 +0000 (13:11 +0000)]
bcm53xx: fix default network interface on Netgear R8000
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45681
Rafał Miłecki [Wed, 13 May 2015 13:11:00 +0000 (13:11 +0000)]
bcm53xx: bgmac: add support for the 3rd core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45680
Steven Barth [Wed, 13 May 2015 12:31:06 +0000 (12:31 +0000)]
odhcpd: ignore /64 on interface when doing PD
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45679
Rafał Miłecki [Wed, 13 May 2015 08:30:45 +0000 (08:30 +0000)]
bcm53xx: sync NVRAM and SPROM drivers with upstream version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45678
Rafał Miłecki [Wed, 13 May 2015 07:52:43 +0000 (07:52 +0000)]
kernel: backport struct ssb_sprom changes submitted by MIPS tree
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45677
Rafał Miłecki [Tue, 12 May 2015 13:18:53 +0000 (13:18 +0000)]
b53: Allow using all ports on BCM53012
This chipset has at least 8 usable ports, e.g. Netgear R8000 has ports
5, 7 and 8 connected to Ethernet interfaces:
vlan1ports=0 1 2 3 5 7 8*
vlan2ports=4 8u
Port 6 seems to be always disabled.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45676
Steven Barth [Mon, 11 May 2015 19:49:03 +0000 (19:49 +0000)]
odhcpd: remove invalid call to free()
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45675
Felix Fietkau [Mon, 11 May 2015 09:17:51 +0000 (09:17 +0000)]
image: disable compile target within image builder
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45674
projects / openwrt / staging / luka.git / log