Daniel Golle [Mon, 31 Jul 2023 16:46:22 +0000 (17:46 +0100)]
uboot-mediatek: add missing 'memory' nodes to downstream boards
Among the patches adding support for MT7988 also came the switch to
use fdtdec_setup_mem_size_base() and no longer rely on CFG_SYS_SDRAM_BASE.
Take care of our downstream boards which did not have a 'memory' node in
their device trees.
Fixes: 572ea68070 ("uboot-mediatek: add patches for MT7988 and builds for RFB")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 17:55:32 +0000 (18:55 +0100)]
uboot-mediatek: add patches for MT7988 and builds for RFB
Import pending patches adding support for MT7988 and provide builds
for the reference board for all possible boot media.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 14:50:27 +0000 (15:50 +0100)]
uboot-mediatek: update to version 2023.07.02
Release 2023.07 got tagged wrongly and replaced by follow-up release
2023.07.02.
Now using upstream DTS for BPi-R3.
Removed two patches which made it upstream, refreshed the rest.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 31 Jul 2023 00:12:24 +0000 (01:12 +0100)]
arm-trusted-firmware-mediatek: fix PKG_MIRROR_HASH
Instead of using the hash of the Github-generated tarball use the
hash of the tarball generated by the OpenWrt build system (in this
case they are different, unfortunately).
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes: 07dbeb430e ("arm-trusted-firmware-mediatek: update to sources of 2023-07-24")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 14:12:27 +0000 (15:12 +0100)]
arm-trusted-firmware-mediatek: update to sources of 2023-07-24
Use updated Trusted Firmware-A sources from MediaTek, now stacked
on top of the ARM Trusted Firmware-A v2.9 release.
Add builds for the newly added MT7988 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sat, 22 Jul 2023 14:10:54 +0000 (15:10 +0100)]
arm-trusted-firmware-tools: update to version 2.9
147f52f3e feat(fiptool): add cca, core_swd, plat cert in FIP
0aaa382fe fix(sptool): fix concurrency issue for SP packages
cb666b39d Merge "fix(sptool): fix concurrency issue for SP packages" into integration
0be2475f6 fix: 'sp_mk_generator.py' reference to undef var
1a28f290b fix(sptool): operators "is/is not" in sp_mk_gen.py
cf2dd17dd refactor(security): add OpenSSL 1.x compatibility
4daeaf341 fix(sptool): add dependency to SP image
06e69f7c9 feat(fiptool): handle FIP in a disk partition
5a53c6c66 Merge "feat(fiptool): handle FIP in a disk partition" into integration
034a2e3ef refactor(fiptool): move plat_fiptool.mk to tools
0165ddd7c build(fiptool): add object dependency generation
c89fdb4a5 Merge "refactor(fiptool): move plat_fiptool.mk to tools" into integration
1b491eead fix(tree): correct some typos
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Petr Štetiar [Fri, 28 Jul 2023 06:20:57 +0000 (08:20 +0200)]
mediatek: filogic: fix broken sysupgrade script
Changes introduced in commit
54dc1cde48a4 ("mediatek: filogic: add
support for Xiaomi WR30U") missed to end the case item with mandatory
`;;` which lead to a broken sysupgrade.
Fixes: 54dc1cde48a4 ("mediatek: filogic: add support for Xiaomi WR30U")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Hank Moretti [Wed, 26 Jul 2023 14:39:16 +0000 (14:39 +0000)]
mediatek: filogic: add specific layout for WR30U
Because this device enable NMBM by default, most users use custom
U-Boot with NMBM-Enabled in Chinese forums.
This layout is the same as the ubootmod layout but enabling NMBM.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
Hank Moretti [Fri, 21 Jul 2023 03:54:52 +0000 (03:54 +0000)]
mediatek: filogic: add support for Xiaomi WR30U
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: ESMT F50L1G41LB 128MB
RAM: NT52B128M16JR-FL 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Flash instructions:
1. Get ssh access
link: https://forum.openwrt.org/t/openwrt-support-for-xiaomi-ax3000ne/153769/22
2. Backup import partitions
```
dev: size erasesize name
mtd1:
00100000 00020000 "BL2"
mtd2:
00040000 00020000 "Nvram"
mtd3:
00040000 00020000 "Bdata"
mtd4:
00200000 00020000 "Factory"
mtd5:
00200000 00020000 "FIP"
mtd8:
02200000 00020000 "ubi"
mtd9:
02200000 00020000 "ubi1"
mtd12:
00040000 00020000 "KF"
```
Use these commands blow to backup your stock partitions.
```
nanddump -f /tmp/BL2.bin /dev/mtd1
nanddump -f /tmp/Nvram.bin /dev/mtd2
nanddump -f /tmp/Bdata.bin /dev/mtd3
nanddump -f /tmp/Factory.bin /dev/mtd4
nanddump -f /tmp/FIP.bin /dev/mtd5
nanddump -f /tmp/ubi.bin /dev/mtd8
nanddump -f /tmp/KF.bin /dev/mtd12
```
Then, transfer them to your computer via scp, netcat, tftp
or others and keep them in a safe place.
3. Setup Nvram
Get the current stock: `cat /proc/cmdline`
If you find `firmware=0` or `mtd=ubi`, use these commands:
```
nvram set boot_wait=on
nvram set uart_en=1
nvram set flag_boot_rootfs=1
nvram set flag_last_success=1
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
```
If you find `firmware=1` or `mtd=ubi1`, use these commands:
```
nvram set boot_wait=on
nvram set uart_en=1
nvram set flag_boot_rootfs=0
nvram set flag_last_success=0
nvram set flag_boot_success=1
nvram set flag_try_sys1_failed=0
nvram set flag_try_sys2_failed=0
nvram commit
```
4. Flash stock-initramfs-factory.ubi
If you find `firmware=0` or `mtd=ubi`:
`ubiformat /dev/mtd9 -y -f /tmp/stock-initramfs-factory.ubi`
If you find `firmware=1` or `mtd=ubi1`:
`ubiformat /dev/mtd8 -y -f /tmp/stock-initramfs-factory.ubi`
Then reboot your router, it should boot to the openwrt
initramfs system now.
5. Setup uboot-env
Now it will be setup automatically in upgrade process,
you can skip this step.
If your `fw_setenv` did not work, you need run this command:
`echo "/dev/mtd1 0x0 0x10000 0x20000" > /etc/fw_env.config`
Then setup uboot-env:
```
fw_setenv boot_wait on
fw_setenv uart_en 1
fw_setenv flag_boot_rootfs 0
fw_setenv flag_last_success 1
fw_setenv flag_boot_success 1
fw_setenv flag_try_sys1_failed 8
fw_setenv flag_try_sys2_failed 8
fw_setenv mtdparts "nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),
2048k(factory),2048k(fip),256k(crash),256k(crash_log),
34816k(ubi),34816k(ubi1),32768k(overlay),12288k(data),256k(KF)"
```
6. Flash stock-squashfs-sysupgrade.bin
Use shell command:
`sysupgrade -n /tmp/stock-squashfs-sysupgrade.bin`
Or go to luci web.
If you need to change to Openwrt U-Boot layout, do next. If you
do not need, please ignore it.
Change to OpenWrt U-Boot:
1. Flash ubootmod-initramfs-factory.ubi
Check mtd partitions: `cat /proc/mtd`
```
mtd7:
00040000 00020000 "KF"
mtd8:
02200000 00020000 "ubi_kernel"
mtd9:
04e00000 00020000 "ubi"
```
Run following command:
`ubiformat /dev/mtd8 -y -f /tmp/ubootmod-initramfs-factory.ubi`
Then reboot your router, it should boot to the openwrt initramfs
system now.
2. Check mtd again
```
mtd7:
00040000 00020000 "KF"
mtd8:
07000000 00020000 "ubi"
```
Make sure mtd8 is ubi.
3. Install kmod-mtd-rw
Run command: `opkg update && opkg install kmod-mtd-rw`
Or get it in openwrt server, or build it yourself, then install
it manually
Then run this command:
`insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
4. Clean up pstore
Run Command: `rm -f /sys/fs/pstore/*`
5. Format ubi and create new ubootenv volume
```
ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
```
6. (Optional) Add recovery boot feature.
```
ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB
ubiupdatevol /dev/ubi0_2 /tmp/ubootmod-initramfs-recovery.itb
```
7. Flash Openwrt U-Boot
```
mtd write /tmp/ubootmod-preloader.bin BL2
mtd write /tmp/ubootmod-bl31-uboot.fip FIP
```
6. Flash ubootmod-squashfs-sysupgrade.itb
Use shell command:
`sysupgrade -n /tmp/ubootmod-squashfs-sysupgrade.itb`
Or go to luci web.
Now everything is done, Enjoy!
Go Back to stock from Openwrt U-Boot:
1. Force flash ubootmod-initramfs-recovery.itb
Use shell command:
`sysupgrade -F -n /tmp/ubootmod-initramfs-recovery.itb`
Or go to luci web.
Then it should boot to the openwrt initramfs system now.
2. Format ubi and Nvram
```
ubidetach -p /dev/mtd8; ubiformat /dev/mtd8 -y; ubiattach -p /dev/mtd8
mtd erase Nvram
```
3. Install kmod-mtd-rw
Run command: `opkg update && opkg install kmod-mtd-rw`
Or get it in openwrt server, or build it yourself, then install
it manually
Then run this command:
`insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
4. Flash stock U-Boot and ubi
```
mtd write /tmp/BL2.bin BL2
mtd write /tmp/FIP.bin FIP
mtd write /tmp/ubi.bin ubi
```
Then reboot your router, waiting it finished rollback in minutes.
Go Back to stock from stock layout Openwrt:
Just run command: `ubiformat /dev/mtd8 -y -f /tmp/ubi.bin`
Then reboot your router, waiting it finished rollback in minutes.
Notes:
1. Openwrt U-Boot and ubootmod openwrt did not enable NMBM.
Please make your backup safe.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
Hank Moretti [Thu, 20 Jul 2023 17:42:58 +0000 (17:42 +0000)]
uboot-mediatek: add support for Xiaomi WR30U
Add a custom uboot build to support openwrt uboot layout.
Signed-off-by: Hank Moretti <mchank9999@gmail.com>
David Bauer [Fri, 9 Jun 2023 11:39:52 +0000 (13:39 +0200)]
mediatek: add support for Acer Predator W6
Hardware
--------
SOC: MediaTek MT7986A
RAM: 1GB DDR4
FLASH: 4GB eMMC
WiFi: 2x2 2.4 GHz 802.11 b/g/n/ax MT7916 DBDC
4x4 5 GHz 802.11 a/n/ac/ax MT7986
2x2 6 GHz 802.11ax MT7916 DBDC
ETH: 4x LAN 1Gbit/s (MT7531)
1x WAN 2.5Gbit/s (GPY211)
BTN: RESET, WPS
LED: Antenna LEDs (GPIO)
Mood-LED (Kinetic KTD2601) - unsupported
UART: Header nest to USB port - 3V3 115200 8N1
[BUTTON] GND - RX - TX [USB]
Installation
------------
1. Connect to the device using serial console.
2. Interrupt the Autoboot process when promted by sending '0' twice.
3. Serve the OpenWrt initramfs image using TFTP at 192.168.1.66. Name
the image "predator.bin" and conenct the TFTP server to the routers
LAN port.
4. Configure U-Boot to allow loading unsigned images from MMC
$ setenv bootcmd 'mmc read 0x40000000 0x00004400 0x0010000;
fdt addr $(fdtcontroladdr); fdt rm /signature; bootm 0x40000000';
saveenv
5. Transfer the image from U-Boot
$ setenv serverip 192.168.1.66; setenv ipaddr 192.168.1.1;
tftpboot 0x46000000 predator.bin; fdt addr $(fdtcontroladdr);
fdt rm /signature; bootm
6. Wait for OpenWrt to boot
7. Transfer the OpenWrt sysupgrade image to the router using scp.
8. Install OpenWrt using sysupgrade.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
7e7eb5312d7810084547bb54a4b6867c2da08182)
John Audia [Thu, 27 Jul 2023 13:22:32 +0000 (09:22 -0400)]
kernel: bump 5.15 to 5.15.123
Manually rebased:
bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*]
bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch
Removed upstreamed:
backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1]
backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2]
pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3]
pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4]
bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5]
bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6]
ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch[7]
ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[8]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
02474292a44205c1eb5a03634ead155a3c9134f4
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
86b93cbfe104e99fd3d25a49748b99fb88101573
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
79b9ab357b6f5675007f4c02ff8765cbd8dc06a2
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
5899bc4058e89d5110a23797ff94439c53b77c25
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
95afd2c7c7d26087730dc938709e025a303e5499
7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
40844343a8853a08b049d50c967e2a1e28f0ece6
8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=
6ad5ded420f5d96f7c65b68135f5787a1c7e58d7
Build system: x86/64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John Audia <therealgraysky@proton.me>
[rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
8590531048f138ff719c8b317c443a6a7538a762)
[Refreshed on top of openwrt-23.05]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Oli Ze [Thu, 27 Jul 2023 05:23:12 +0000 (07:23 +0200)]
uboot-mvebu: update to version 2023.07.02
Since 2021.07 multiple bugs were introduced that made it impossible to
create a bootable target for mvebu. Those issues should be now fixed since
2023.07-rc1.
References: #11661
Signed-off-by: Oli Ze <olze@trustserv.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs
Signed-off-by: Petr Štetiar <ynezz@true.cz> [facelift]
(cherry picked from commit
ba7d6dddc7d20222c1703b173ef50befefb3fb52)
Rafał Miłecki [Sat, 29 Jul 2023 15:02:28 +0000 (17:02 +0200)]
bcm53xx: backport more DT changes queued for v6.6
Those sort out BCM53573 Ethernet info finally.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
ca8868a51127f6081a524d47eab937b90af0bf05)
Rafał Miłecki [Sun, 23 Jul 2023 20:41:18 +0000 (22:41 +0200)]
bcm53xx: add BCM53573 Ethernet fix sent upstream for v6.6
It seems that DSA-based b53 driver never worked with BCM53573 SoCs and
BCM53125.
In case of swconfig-based b53 this fixes a regression. Switching bgmac
from using mdiobus_register() to of_mdiobus_register() resulted in MDIO
device (BCM53125) having of_node set (see of_mdiobus_register_phy()).
That made downstream b53 driver read invalid data from DT and broke
Ethernet support.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
79fd3e62b4910731c13692b2daa2083e0f95c023)
Alexander Friese [Wed, 12 Jul 2023 14:46:01 +0000 (16:46 +0200)]
ipq4019: fix support for AVM FRITZ!Repeater 3000
new versions of the device have NAND with 8bit ECC
which was not yet supported before. This change removes
ECC restrictions.
Signed-off-by: Alexander Friese <af944580@googlemail.com>
(cherry picked from commit
6b11f0ec83ceb9747dcbb0ffca0882b90da46b59)
Jo-Philipp Wich [Thu, 27 Jul 2023 09:27:46 +0000 (11:27 +0200)]
libnl-tiny: update to latest Git HEAD
8667347 build: allow passing SOVERSION value for dynamic library
Also adjust packaging of the library to only ship the SOVERSION
suffixed library object, to allow for concurrent installation of
ABI-incompible versions in the future.
Fixes: #13082
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit
4af0a72a65d7c92ed4e7c2455090f695f424903d)
David Bauer [Fri, 9 Jun 2023 12:12:47 +0000 (14:12 +0200)]
scripts: use sep-char for hash nodes
U-Boot with enabled secure-boot will not boot images with the
@-character used for hash node-names.
Use the existing separation character configurable for each device.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
2b133ab19cd5d741f3191f917c607667943f5f58)
David Bauer [Sat, 6 May 2023 14:57:18 +0000 (16:57 +0200)]
ipq40xx: add support for Teltonika RUTX50
Hardware
--------
CPU: Qualcomm IPQ4018
RAM: 256M
Flash: 16MB SPI-NOR (W25Q128)
128MB SPI-NAND (XTX)
WiFi: 2T2R (2GHz 802.11n ; 5 GHz 802.11ac)
ETH: 4x LAN ; 1x WAN (Gigabit)
CELL: Quectel RG501Q 3G/4G/5G
UART: Available on the goldfinger connector (Pinout silkscreened)
115200 8N1 3V3 - Only connect RX / TX / GND
Installation
------------
1. Enable SSH in the Teltonika UI
(System --> Administration --> Access Control)
2. Check from which partition set the device is currently running from.
$ cat /proc/boot_info/rootfs/primaryboot
In case this output reads 0, install a Software update from Teltonika
first. After upgrade completion, check this file now reads 1 before
continuing.
2. Transfer the OpenWrt factory image to the device using scp. Use the
same password (user root!) as used for the Web-UI.
$ scp -O openwrt-factory.bin root@192.168.1.1:/tmp
3. Connect to the device using ssh as the root user.
4. Install OpenWrt by writing the factory image to flash.
$ ubiformat /dev/mtd16 -y -f /tmp/openwrt-factory.bin
5. Instruct the bootloaer to boot from the first partition set.
$ echo 0 > /proc/boot_info/rootfs/primaryboot
$ cat /proc/boot_info/getbinary_bootconfig > /tmp/bootconfig.bin
$ cat /proc/boot_info/getbinary_bootconfig1 > /tmp/bootconfig1.bin
$ mtd write /tmp/bootconfig.bin /dev/mtd2
$ mtd write /tmp/bootconfig1.bin /dev/mtd3
6. Reboot the device.
$ reboot
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
844bb4bfad84cc6267f9b138d1f63b07ed3b77d0)
David Bauer [Sat, 6 May 2023 14:51:18 +0000 (16:51 +0200)]
ipq40xx: move Teltonika RUT STM32 IO to specific DTS
Prepare to re-use the DTS for the RUTX50.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
dbc4be142e206e681ac53afa3fd1e4018e7843b7)
Etienne Champetier [Mon, 10 Jul 2023 05:56:05 +0000 (07:56 +0200)]
dropbear: add
ed25519 for failsafe key
At least Fedora and RHEL 9 set RSAMinSize=2048, so when trying to use
failsafe, we get 'Bad server host key: Invalid key length'
To workaround the issue, we can use: ssh -o RSAMinSize=1024 ...
Generating 2048 bits RSA is extremely slow, so add
ed25519.
We keep RSA 1024 to be as compatible as possible.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit
6ac61dead99ff6b9df00c29b7a858772449718b2)
Michał Kwiatek [Wed, 12 Jul 2023 19:39:39 +0000 (21:39 +0200)]
ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01837
Changelog from quic:
Bug fixes, stability improvements from previous releases
are present. There are no backward comatibility issues
with this release.
Tested-by: Michał Kwiatek <michal@kwiatek.it> # Xiaomi AX3600
Signed-off-by: Michał Kwiatek <michal@kwiatek.it>
[ improve commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit
1c56801dd2e696cac7da45912b5e3ea1165549d5)
Mathew McBride [Fri, 21 Jul 2023 01:38:30 +0000 (01:38 +0000)]
kernel: move NXP DPAA2 SFP patches to generic patches
These are used by both the armsr (EFI boot) and
layerscape targets for phylink-controlled SFP
support on NXP DPAA2 platforms (LS1088,LS2088,LX2160).
This is in place of commit
a7bd96c98f8f
("layerscape: add patches for SFP support on DPAA2 platforms")
in the main branch. armsr in main started at kernel 6.1
so there is not an equivalent 5.15 commit to cherry pick.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Tue, 27 Jun 2023 06:37:28 +0000 (06:37 +0000)]
layerscape: base-files: remove redundant RAMFS_COPY_* additions
All the tools (e.g fw_setenv, ubiupdatevol) and config (fw_env.config)
needed for sysupgrade are already included in /lib/upgrade/stage2
Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit
094c37708ace9040e294c5aa7be34bc9e7a8dcc1)
Mathew McBride [Tue, 27 Jun 2023 04:20:50 +0000 (04:20 +0000)]
layerscape: remove Traverse LS1043 boards
The Traverse LS1043 boards were not publicly released,
all the production has been going to OEM customers who
do not use the image format defined in the OpenWrt tree.
Only a few samples were circulated outside Traverse
and our OEM customers. The public release (then called
Five64) of this series was cancelled in favour of our
LS1088A based design (Ten64).
It is best to remove these boards to avoid wasting
OpenWrt project and contributor resources.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit
8e7ba6fbae80838c2219ee38307af9c883606c2c)
Mathew McBride [Tue, 6 Jun 2023 06:24:11 +0000 (06:24 +0000)]
layerscape: armv8_64b: add Traverse Ten64 NAND variant
The Ten64 board[1] is based around NXP's Layerscape LS1088A SoC.
It is capable of booting both standard Linux distributions
from disk devices, using EFI, and booting OpenWrt
from NAND.
See the online manual for more information, including the
flash layout[2].
This patchset adds support for generating Ten64 images
for NAND boot.
For disk boot, one can use the EFI support that was
recently added to the armvirt target.
We previously supported NAND users by building
inside our armvirt/EFI target[3], but this approach
is not suitable for OpenWrt upstream. Users who
used our supplied NAND images will be able to upgrade
to this via sysupgrade.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
[1] - https://www.traverse.com.au/hardware/ten64
[2] - https://ten64doc.traverse.com.au/hardware/flash/
[3] - Example:
https://gitlab.com/traversetech/ls1088firmware/openwrt/-/commit/
285e4360e1604eb466880d245d48efd9962143a5
(cherry picked from commit
af0546da3440dba24217949527e503820350ff05)
Lech Perczak [Sat, 12 Mar 2022 16:57:44 +0000 (17:57 +0100)]
uqmi: do not start 464xlat for dual-stack configurations
If dual-stack configuration is in use, and dhcpv6 option is set, do not start
464xlat sub-interface for dhcpv6 sub-interace , as the configuration already
provides IPv4 connectivty, be it through single or dual APN configuration.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit
a9237c1af9c2eee0a49d96f2588be85d24489f20)
Lech Perczak [Sat, 12 Mar 2022 13:39:18 +0000 (14:39 +0100)]
uqmi: support split-APN IPv4 and IPv6 dual-stack
Add two new "v6apn" and "v6profile" properties, to support split-APN
dual-stack onfiguration. This extends the existing ipv4v6 PDP type,
allowing simultaneous connection to two distinct APNs,
one for IPv4 and one for IPv6.
The parameters override existing 'apn' and 'profile' respectively,
if set, but only for IPv6 part of the connection.
If unset, they default to their original values, constituting a standard
IPv4v6 setup.
If a different APN is set for IPv6, a corresponding profile MUST also be
configured, with a different ID, than the IPv4 profile, for example,
profile 2.
Both APNs must match ones configured through QMI or through 'AT+CGDCONT'
command.
Example configuration in UCI:
config interface 'wan'
option proto 'qmi'
option device '/dev/cdc-wdm0'
option autoconnect '1'
option pdptype 'ipv4v6'
option apn 'internet'
option v6apn 'internetipv6'
option profile '1'
option v6profile '2'
Corresponding profile configuration:
AT+CGDCONT?
+CGDCONT: 1,"IP","internet","0.0.0.0",0,0,0,0
+CGDCONT: 2,"IPV6","internetipv6","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
(cherry picked from commit
48e8bf1b8f3d2750f215765f583c847ff02deca2)
David Bauer [Tue, 4 Jul 2023 23:35:02 +0000 (01:35 +0200)]
mac80211: partly revert force-mac80211 loss detection
This patch will only force mac80211 loss detection upon ath10k by
masking the driver-specific loss-detection bit.
Ref: commit
ed816f6ba8b5 ("mac80211: always use mac80211 loss detection")
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
d9070f8d23621931c4869980f6e5ae17abbe3e58)
[felix.bau@gmx.de: replace path 6.2 with 5.15, refresh patches]
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Shiji Yang [Thu, 22 Jun 2023 18:05:21 +0000 (02:05 +0800)]
ramips: do not print error log when mdio bus is disabled
The mdio bus is used to control externel switch. In most cases, they are
disabled, which is the normal behavior. Treating this as an error makes
no sense, so we need to change the notification level from error to info.
Fixes: a2acdf960704 ("ramips: mt7620: remove useless GMAC nodes")
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit
285f0668f4058a935389985eb80353c8a5adbc7d)
Shiji Yang [Wed, 21 Jun 2023 16:32:32 +0000 (00:32 +0800)]
ramips: backport upstream mt762x PCIe driver error log fixes
These patches silence some mt762x PCIe driver error messeges by removing
the useless debugging codes and replacing incorrectly used 'dev_err()'
with 'dev_info()':
PCI: mt7621: Use dev_info() to log PCIe card detection [1]
mips: pci-mt7620: do not print NFTS register value as error log [2]
mips: pci-mt7620: use dev_info() to log PCIe device detection result [3]
Patch [1] has already been merged into the Linux 6.3 branch. Patches [2] and
[3] have been merged into the "mips-next" tree, and they will be part of the
upcoming Linux 6.5.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v6.4-rc7&id=
50233e105a0332ec0f3bc83180c416e6b200471e
[2] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=
9f9a035e6156a57d9da062b26d2a48d031744a1e
[3] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=
89ec9bbe60b61cc6ae3eddd6d4f43e128f8a88de
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit
4e74777fa8111a2bdf63164a4920a42917faec28)
Aleksander Jan Bajkowski [Sun, 21 May 2023 21:02:17 +0000 (23:02 +0200)]
lantiq: add patches headers
This commit adds headers to the patches, so they can be applied with the
git am command.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
(cherry picked from commit
5d51079fd064a86119c6f44920e737cf5e25d3a0)
Felix Baumann [Fri, 21 Jul 2023 22:32:46 +0000 (22:32 +0000)]
kernel: update patches for mediatek filogic
Fix complaint from actions
Check Kernel patches (mediatek, filogic)
https://github.com/openwrt/openwrt/actions/runs/
5569719763/job/
15081672586?pr=13072
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Felix Fietkau [Wed, 26 Jul 2023 09:20:58 +0000 (11:20 +0200)]
mt76: update to the latest version
53edfc7aaa34 wifi: mt76: mt7603: fix beacon interval after disabling a single vif
7ef4dd12d982 wifi: mt76: mt7603: fix tx filter/flush function
152608a40aa7 wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)
cacac3902a63 wifi: mt76: split get_of_eeprom in subfunction
cd3dfe392769 wifi: mt76: add support for providing eeprom in nvmem cells
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
4395236a100b558d96d0e836ddc76df19b33ddfb)
Felix Fietkau [Fri, 14 Jul 2023 09:20:30 +0000 (11:20 +0200)]
mt76: update to the latest version
bb3937d5c3e0 wifi: mt76: mt7915: remove VHT160 capability on MT7915
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
063641f8cf7990731919b950c1bf9eb15d1e74c9)
Felix Fietkau [Mon, 24 Jul 2023 12:43:03 +0000 (14:43 +0200)]
kernel: drop mips highmem offset start overrides
The maximum offset that can be supported is 0x20000000
Do not override it to to something bigger than that on MT7621, as that could
cause issues based on the fixed memory mappings. This makes the last 64 MB
RAM unusable on MT7621 devices with 512 MB but avoids incurring a heavy
performance hit
Fixes: cd2b74e01e8d ("ramips: mt7621: disable highmem support and remove highmem offset patch")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
a110de8152df46a1e2adf7010ba75fb3b1236cd8)
Felix Fietkau [Mon, 24 Jul 2023 11:17:44 +0000 (13:17 +0200)]
ramips: mt7621: disable highmem support and remove highmem offset patch
On MT7621 it was observed, that enabling highmem support causes a significant
performance drop, as documented in: https://github.com/openwrt/openwrt/issues/13151
By adjusting the highmem start offset, we avoid leaving any RAM unaddressable,
even on devices with 512 MB
Fixes: https://github.com/openwrt/openwrt/issues/13151
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
cd2b74e01e8d5f5b80b82db1cb204c13ed99dd58)
David Bauer [Sat, 15 Jul 2023 16:10:31 +0000 (18:10 +0200)]
mediatek: add support for ZyXEL NWA50AX Pro
Hardware
--------
CPU: Mediatek MT7981
RAM: 512M DDR4
FLASH: 256M NAND
ETH: MaxLinear GPY211 (2.5GbE N Base-T)
WiFi: Mediatek MT7981 (2.4GHz 2T2R:2 5GHz 3T3R:2 802.11ax)
BTN: 1x Reset
LED: 1x Multi-Color
UART Console
------------
Available below the rubber cover next to the ethernet port.
Settings: 115200 8N1
Layout:
<12V> <LAN> GND-RX-TX-VCC
Logic-Level is 3V3. Don't connect VCC to your UART adapter!
Installation Web-UI
-------------------
Upload the Factory image using the devices Web-Interface.
As the device uses a dual-image partition layout, OpenWrt can only
installed on Slot A. This requires the current active image prior
flashing the device to be on Slot B.
In case this is not the case, OpenWrt will boot only one time, returning
to the ZyXEL firmware the second boot.
If this happens, first install a ZyXEL firmware upgrade of any version
and install OpenWrt after that.
Installation TFTP / Recovery
----------------------------
This installation routine is especially useful in case of a bricked
device.
Attach to the UART console header of the device. Interrupt the boot
procedure by pressing Enter.
The bootloader has a reduced command-set available from CLI, but more
commands can be executed by abusing the atns command.
Boot a OpenWrt initramfs image available on a TFTP server at
192.168.1.66. Rename the image to nwa50axpro-openwrt-initramfs.bin.
$ atnf nwa50axpro-openwrt-initramfs.bin
$ atna 192.168.1.88
$ atns "192.168.1.66; tftpboot; setenv fdt_high 0xffffffffffffffff;
bootm"
Upon booting, set the booted image to the correct slot:
$ zyxel-bootconfig /dev/mtd9 get-status
$ zyxel-bootconfig /dev/mtd9 set-image-status 0 valid
$ zyxel-bootconfig /dev/mtd9 set-active-image 0
Copy the OpenWrt sysupgrade image to the device using scp.
Write the sysupgrade image to NAND using sysupgrade.
$ sysupgrade -n image.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
f0445746f6fd96fc7c5394b238153bd2ff22bc5b)
Daniel Golle [Sat, 22 Jul 2023 11:30:43 +0000 (12:30 +0100)]
mediatek: filogic: set DEVICE_DTS_LOADADDR for BPi-R3
U-Boot complains that the overlayed DT needs relocation, so set
DEVICE_DTS_LOADADDR to have it relocated.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
b1d10e0174f71099016a7e6dcd27b65a77fd51b4)
Tony Ambardar [Mon, 17 Jul 2023 01:22:59 +0000 (18:22 -0700)]
libbpf: Update to v1.2.2
Update to the latest upstream release to include recent bugfixes:
Link: https://github.com/libbpf/libbpf/compare/v1.2.0...v1.2.2
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit
1d5e7b85ccc58f3d010a54e82ccea81fc102262b)
Nick Hainke [Fri, 14 Jul 2023 13:26:06 +0000 (15:26 +0200)]
nftables: update to 1.0.8
ChangeLog:
https://www.netfilter.org/projects/nftables/files/changes-nftables-1.0.8.txt
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit
58c498247b3d06c0ff1967d2f48ba84084a6cf25)
Nick Hainke [Wed, 12 Jul 2023 21:38:51 +0000 (23:38 +0200)]
libnftnl: update to 1.2.6
Release Notes:
https://lists.netfilter.org/pipermail/netfilter-announce/2023/000250.html
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit
e57a752217113d066cdea2073f35e8c7c1fafaa6)
Andre Heider [Thu, 6 Jul 2023 06:16:50 +0000 (08:16 +0200)]
hostapd: update to 2023-06-22
Removed, merged upstream:
- 170-wpa_supplicant-fix-compiling-without-IEEE8021X_EAPOL.patch
Manually refreshed:
- 040-mesh-allow-processing-authentication-frames-in-block.patch
- 600-ubus_support.patch
- 761-shared_das_port.patch
Fixes: #12661
Fixes: 304423a4 ("hostapd: update to 2023-03-29")
Signed-off-by: Andre Heider <a.heider@gmail.com>
(cherry picked from commit
cd804c1ebb34c9740f8ad9fe393a81f3efb7b009)
John Audia [Sun, 9 Jul 2023 20:01:47 +0000 (16:01 -0400)]
linux-firmware: update to
20230625
Change from git log --oneline:
ee91452d (tag:
20230625) Makefile, copy-firmware: support xz/zstd compressed firmware
ad2ce8be copy-firmware: silence the last shellcheck warnings
67bf50e7 copy-firmware: drop obsolete backticks, quote
77f31a80 copy-firmware: tweak sed invocation
40fa2b20 copy-firmware: quote deskdir and dirname
77f92e0b check_whence: error if symlinks are in-tree
f2671b1f check_whence: error if File: is actually a link
4b539e7a check_whence: strip quotation marks
32693d3b linux-firmware: wilc1000: update WILC1000 firmware to v16.0
109b23c5 ice: update ice DDP wireless_edge package to 1.3.10.0
ade163aa amdgpu: DMCUB updates for DCN 3.1.4 and 3.1.5
045b2136 amdgpu: update DMCUB to v0.0.172.0 for various AMDGPU ASICs
5a1842ce Merge branch 'rb3-update' of https://github.com/lumag/linux-firmware
2f81bd9f fix broken cirrus firmware symlinks
01a7a844 qcom: Update the microcode files for Adreno a630 GPUs.
94120467 qcom: sdm845: rename the modem firmware
1c599488 qcom: sdm845: update remoteproc firmware
1cd1c871 rtl_bt: Update RTL8852A BT USB firmware to 0xDAC7_480D
55e74485 rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225
9dbd8ec2 amdgpu: DMCUB updates for various AMDGPU asics
9a47adc7 Merge branch 'mtl_huc_v8.5.0' of git://anongit.freedesktop.org/drm/drm-firmware
eb3ae841 linux-firmware: update firmware for MT7922 WiFi device
5ce06b9e linux-firmware: update firmware for MT7921 WiFi device
2c50361c linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
185f49df linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
05f94af7 Merge branch 'v2.0.21478' of https://github.com/yunfei-mtk/linux_fw_scp
5de33fb4 i915: Add HuC v8.5.0 for MTL
795aea91 mediatek: Update mt8195 SCP firmware to support hevc
fc90c59b Merge branch 'db410c' of https://github.com/lumag/linux-firmware
9d4c9a52 qcom: apq8016: add Dragonboard 410c WiFi and modem firmware
1f9667eb Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware
b544e2b0 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
244d6b5c cirrus: Add firmware for new Asus ROG Laptops
d11ae984 brcm: Add symlinks from Pine64 devices to AW-CM256SM.txt
1c513ec7 amdgpu: Update GC 11.0.1 and 11.0.4
8449fcd0 Merge https://github.com/pkshih/linux-firmware
c10facaf rtw89: 8851b: add firmware v0.29.41.0
1ba3519e Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/firmware
2e775450 amdgpu: update yellow carp firmware for amd.5.5 release
5eccb3c1 amdgpu: update navi14 firmware for amd.5.5 release
c70d3c3b amdgpu: update navi12 firmware for amd.5.5 release
0e4f17cc amdgpu: update vega20 firmware for amd.5.5 release
413348f3 amdgpu: update vega12 firmware for amd.5.5 release
c167587d amdgpu: update navi10 firmware for amd.5.5 release
3c98630a amdgpu: update vega10 firmware for amd.5.5 release
d13ef0cb amdgpu: update PSP 13.0.11 firmware for amd.5.5 release
31f8f526 amdgpu: update GC 11.0.4 firmware for amd.5.5 release
f0ce7026 amdgpu: update SDMA 6.0.1 firmware for amd.5.5 release
47424464 amdgpu: update PSP 13.0.4 firmware for amd.5.5 release
60dc78a7 amdgpu: update GC 11.0.1 firmware for amd.5.5 release
ba70041c amdgpu: update 13.0.8 firmware for amd.5.5 release
9c48881f amdgpu: update GC 10.3.7 firmware for amd.5.5 release
bb4d7250 amdgpu: update vangogh firmware for amd.5.5 release
102a4138 amdgpu: update VCN 4.0.4 firmware for amd.5.5 release
a7fe4aa1 amdgpu: update SMU 13.0.7 firmware for amd.5.5 release
80b2d561 amdgpu: update PSP 13.0.7 firmware for amd.5.5 release
a5d7b4df amdgpu: update GC 11.0.2 firmware for amd.5.5 release
c1db00c5 amdgpu: update renoir firmware for amd.5.5 release
683c91f7 amdgpu: update VCN 4.0.0 firmware for amd.5.5 release
39d6fcc7 amdgpu: update SMU 13.0.0 firmware for amd.5.5 release
56832557 amdgpu: update PSP 13.0.0 firmware for amd.5.5 release
ffe1a41e amdgpu: update GC 11.0.0 firmware for amd.5.5 release
72d525d7 amdgpu: update green sardine firmware for amd.5.5 release
ceba765d amdgpu: update beige goby firmware for amd.5.5 release
95eb53c9 amdgpu: update dimgrey cavefish firmware for amd.5.5 release
909cef98 amdgpu: update arcturus firmware for amd.5.5 release
91251d16 amdgpu: update vcn 3.1.2 firmware for amd.5.5 release
9eaff866 amdgpu: update psp 13.0.5 firmware for amd.5.5 release
44772528 amdgpu: update GC 10.3.6 firmware for amd.5.5 release
3bffc9f8 amdgpu: update navy flounder firmware for amd.5.5 release
3b920773 amdgpu: update sienna cichlid firmware for amd.5.5 release
84d5550e amdgpu: update aldebaran firmware for amd.5.5 release
dcd30473 amdgpu: DMCUB updates for various AMDGPU asics
c9e4034a ice: update ice DDP comms package to 1.3.40.0
601c1813 Merge https://github.com/pkshih/linux-firmware
08b854f0 rtlwifi: Add firmware v6.0 for RTL8192FU
b72c69dd rtlwifi: Update firmware for RTL8188EU to v28.0
51290942 (tag:
20230515) Merge branch 'main' of https://github.com/CirrusLogic/linux-firmware
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit
a5005508f069c9bd0c1d33970e9b3ecbe5040380)
Carsten Spieß [Wed, 12 Jul 2023 08:24:11 +0000 (10:24 +0200)]
octeon: ubnt-edgerouter-4/6p: devicetree cleanup
removed redundant eeprom partition nodes from
cn7130_ubnt_edgerouter-4.dts and cn7130_ubnt_edgerouter-6p.dts
as they are identically defined in cn7130_ubnt_edgerouter-e300.dtsi.
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
(integrated eeprom referenced node in the .dtsi)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit
700f11aaadb7baa38285ed8f928e976a29a72eed)
Carsten Spieß [Wed, 12 Jul 2023 08:16:27 +0000 (10:16 +0200)]
octeon: ubnt-edgerouter-e300: fix missing MTD partition
The MAC addresses should be read from 3rd MTD partition,
but only two MTD partitions are populated.
To fix it, a partitions node has to surround the partition
nodes in device tree.
Tested with Edgerouter 6P
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
(fixed checkpatch complains)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit
2b1d7965c7e74e1b31ff29a966eaf6334b0d7057)
Carsten Spieß [Wed, 12 Jul 2023 08:41:25 +0000 (10:41 +0200)]
octeon: ubnt-edgerouter-e300: fix LED settings
LEDs on Edgerouter 6P didn't work correctly:
blue /white LED swapped, on/off state inverted
Fixed in device tree:
swap the GPIO ports for power:blue and power:white LEDs
change LED activity from LOW to HIGH
Tested on Edgerouter 6P
Signed-off-by: Carsten Spieß <mail@carsten-spiess.de>
(cherry picked from commit
9009672930f7bda99ec8f6f09a92eb49b6c9aac8)
Tomasz Maciej Nowak [Tue, 11 Jul 2023 14:06:21 +0000 (16:06 +0200)]
ib: split out processing user provided packages
Some device recipes remove default target packages. If user tries to add
them back they will be ignored, since packages list is processed in one
go. Process the device recipe packages first and do user ones later, so
additions won't get filtered out.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit
e40b9a7fa002154e85459791101a0444d99dfb86)
Tomasz Maciej Nowak [Tue, 11 Jul 2023 14:09:49 +0000 (16:09 +0200)]
sdk: rename README + update Makefile
'help' target fails not finding a file, so follow up on a change[2] made
as a fix for main README[1].
1.
d0113711a31f ("README: port to 21st century")
2.
751486b31fd9 ("build: fix README.md reference after rename")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit
2d5f7035cf45801158bed6f5d0ac0de0002c1810)
(cherry picked from commit
e9911f10e482f3174f745a36c0c9fd7964758caf)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Adones Pitogo [Tue, 11 Jul 2023 05:31:50 +0000 (13:31 +0800)]
build: fix generation of large .vdi images
Instead of loading the whole image into the memory when generating the
sha256 sum, we load the file in chunks and update the hash incrementally
to avoid MemoryError in python. Also remove a stray empty line.
Fixes: #13056
Signed-off-by: Adones Pitogo <pitogo.adones@gmail.com>
(mention empty line removal, adds Fixes from PR)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit
bdb4b78210cfb6bc8a6cda62fc990dd45ec3054c)
Christian Lamparter [Sat, 15 Jul 2023 19:33:41 +0000 (21:33 +0200)]
armsr: v8: fix NVMEM_IMX_OCOTP_ELE build error
there's a new symbol NVMEM_IMX_OCOTP_ELE that needs to be defined.
otherwise the build will fail:
| i.MX On-Chip OTP Controller support (NVMEM_IMX_OCOTP_ELE) [N/m/y/?] (NEW)
| make[6]: *** [scripts/kconfig/Makefile:77: syncconfig] Error 1
| make[5]: *** [Makefile:628: syncconfig] Error 2
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Rafał Miłecki [Fri, 14 Jul 2023 10:35:26 +0000 (12:35 +0200)]
bcm53xx: backport DT changes queued for v6.6
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
37ff916af789911fdefb802ce9903e866eb82435)
Daniel Golle [Mon, 12 Jun 2023 03:07:57 +0000 (04:07 +0100)]
scripts/mkits.sh: DT overlays don't need a loadaddr
DT overlays do not need relocation in order to be applied, so drop
defining the load address for dtbos.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
cff3786bd54cec8276f1fd08d5c6697846f393a5)
Daniel Golle [Mon, 12 Jun 2023 03:06:40 +0000 (04:06 +0100)]
uboot-mediatek: support classic uImage.FIT with internal images in imszb
The side-effect and main motivation is to also drop the FIT structure size
limit because with multiple device tree overlays it may easily grow beyond
the previous 4kB limit in the future.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
98e3f82c3fb729c1d9de78fef215322528b50cb4)
Daniel Golle [Sat, 8 Jul 2023 16:31:24 +0000 (17:31 +0100)]
mediatek: replace hack for MaxLinear 2.5G PHY
Replace hack with proper patch also for Linux 5.15.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
712fa3eff82086da8a13e7e5bc577df17892a581)
Daniel Golle [Sat, 8 Jul 2023 15:48:39 +0000 (16:48 +0100)]
mediatek: dts: mt7988a: remove boottrap hack
The PHY driver now uses regmap created from pio syscon, we no longer
need the boottrap device.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
f321a49fd523a8d393be8e3cd2de41d67855da91)
Daniel Golle [Sat, 8 Jul 2023 16:21:27 +0000 (17:21 +0100)]
mediatek: use backported Ethernet PHY driver also for 5.15
Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the
driver in files-5.15.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
9fac59009657068d5a58b3d0255d4ca1507dd457)
Daniel Golle [Sat, 8 Jul 2023 15:27:25 +0000 (16:27 +0100)]
mediatek: dts: mt7988a: wire-up mediatek,pio for PHY LEDs
The PHY driver needs to read a register containing the values of the
bootstrap pins (which happen to be the PHY LEDs) to determine the LED
polarities. Allow regmap access to first pinctrl bank by adding the
'syscon' compatible, and reference the pinctrl in the MDIO bus where
the PHY driver will look for it.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit
1f1e0b1144ebaa4ba8b948a12d989a0a6fc9b76f)
Chukun Pan [Sun, 21 May 2023 15:00:16 +0000 (23:00 +0800)]
mediatek: filogic: add H3C Magic NX30 Pro support
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: W25N01GVZEIG 128MB
RAM: NT5CB128M16JR-FL 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, WPS
Power: DC 12V 1A
Flash instructions:
1. PC run command: "telnet 192.168.124.1 99"
Username: H3C, password is the web login
password of the router.
2. Download preloader.bin and bl31-uboot.fip
3. PC run command: "python3 -m http.server 80"
4. Download files in the telnet window:
"wget http://192.168.124.xx/xxx.bin"
Replace xx with your PC's IP and
the preloader.bin and bl31-uboot.fip.
5. Flushing openwrt's uboot:
"mtd write xxx-preloader.bin BL2"
"mtd write xxx-bl31-uboot.fip FIP"
6. Connect to the router via the Lan port,
set a static ip of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
7. Download initramfs image, reboot router,
waiting for tftp recovery to complete.
8. After openwrt boots up, perform sysupgrade.
Note:
1. The u-boot-env partition on mtd is empty,
OEM stores their env on ubi:u-boot-env.
2. Back up all mtd partitions before flashing.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit
e78d1a06c8a47be9ea5a306bfb43f3d7ceb89646)
Chukun Pan [Sat, 20 May 2023 15:03:06 +0000 (23:03 +0800)]
uboot-mediatek: add H3C Magic NX30 Pro support
The OEM uboot limit brush into 3rd-party firmware.
So add a custom uboot build to support openwrt.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
(cherry picked from commit
437e79ad6d01100afac9786d287976de6d5cf363)
Wenli Looi [Thu, 30 Mar 2023 19:46:19 +0000 (19:46 +0000)]
mediatek: add support for Netgear EX6250v2 series
Netgear EX6250v2, EX6400v3, EX6410v2, EX6470 are wall-plug 802.11ac
(Wi-Fi 5) extenders. Like other MT7629 devices, Wi-Fi does not work
currently as there is no driver.
Related: https://github.com/openwrt/openwrt/pull/5084
For future reference, 2.4GHz MAC = LAN+1, 5GHz MAC = LAN+2.
Specifications:
* MT7629, 256 MiB RAM, 16 MiB SPI NOR
* MT7761N (2.4GHz) / MT7762N (5GHz) - no driver
* Ethernet: 1 port 10/100/1000
* UART: 115200 baud (labeled on board)
Installation:
* Flash the factory image through the stock web interface, or TFTP to
the bootloader. NMRP can be used to TFTP without opening the case.
* After installation, perform a factory reset. Wait for the device to
boot, then hold the reset button for 10 seconds. This is needed
because sysupgrade in the stock firmware will attempt to preserve its
configuration using sysupgrade.tgz.
See https://github.com/openwrt/openwrt/pull/4182
Revert to stock firmware:
* Flash the stock firmware to the bootloader using TFTP/NMRP.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
(cherry picked from commit
73de41898fcd06d837b013449c370c493bcdc595)
Wenli Looi [Thu, 30 Mar 2023 22:27:11 +0000 (22:27 +0000)]
image: add additional fields to Netgear encrypted image
These fields are used for EAX12 and EX6250v2 series, and perhaps other
devices. Compatibility is preserved with the WAX202 and WAX206.
In addition, adds the related vars to DEVICE_VARS so that the variables
work correctly with multiple devices.
References in GPL source:
https://www.downloads.netgear.com/files/GPL/EAX12_EAX11v2_EAX15v2_GPL_V1.0.3.34_src.tar.gz
* tools/imgencoder/src/gj_enc.c
Contains code that generates the encrypted image.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
(cherry picked from commit
0a1ebccc8702cadc50bc096f1e185472f3927786)
Pavel Pernička [Tue, 27 Jun 2023 16:34:03 +0000 (18:34 +0200)]
ath79: DTS improvement for buzzer on RB951G-2HnD
Mikrotik RB951 router has a buzzer on the board, which makes annoying noises
due to the interference caused by PoE input or Wifi transmission
when no GPIO pin state is set.
I added buzzer node to device's DTS in order to set deault level to 1
and to provide easier access for it.
Signed-off-by: Pavel Pernička <pernicka.pa@gmail.com>
(cherry picked from commit
dac0a133cf8dbf0bd9afabecdc1092456c451ec7)
Michał Kępień [Sat, 17 Jun 2023 17:12:21 +0000 (19:12 +0200)]
ath79: add support for MikroTik RB951G-2HnD
MikroTik RB951G-2HnD is a wireless SOHO router that was previously
supported by the ar71xx target, see commit
7a709573d7 ("ar71xx: add
kernel support for the Mikrotik RB951G board").
Specifications
--------------
- SoC: Atheros AR9344 (600 MHz)
- RAM: 128 MB (2x 64 MB)
- Storage: 128 MB NAND flash (various manufacturers)
- Ethernet: Atheros AR8327 switch, 5x 10/100/1000 Mbit/s
- 1x PoE in (port 1, 8-30 V input)
- Wireless: Atheros AR9340 (802.11b/g/n)
- USB: 2.0 (1A)
- 8x LED:
- 1x power (green, not configurable)
- 1x user (green, not configurable)
- 5x GE ports (green, not configurable)
- 1x wireless (green, not configurable)
- 1x button (restart)
Unlike on the RB951Ui-2HnD, none of the LEDs on this device seem to be
GPIO-controllable, which was also the case for older OpenWRT versions
that supported this board via a mach file. The Ethernet port LEDs are
controlled by the switch chip.
See https://mikrotik.com/product/RB951G-2HnD for more details.
Flashing
--------
TFTP boot initramfs image and then perform sysupgrade. Follow
common MikroTik procedures at https://openwrt.org/toh/mikrotik/common.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
(cherry picked from commit
db02cecd6ad2e5962e6e9d8307da34855a083ad6)
Michał Kępień [Thu, 15 Jun 2023 13:59:44 +0000 (15:59 +0200)]
ath79: mikrotik: extract common bits for RB951x-2HnD devices
Mikrotik RouterBOARD 951Ui-2HnD and Mikrotik RouterBOARD RB951G-2HnD are
very similar devices. Extract the DTS bits that are identical for these
two boards to a separate DTSI file.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
(cherry picked from commit
c6ef4170945c6ab5432382110389f31fea92a76c)
Rafał Miłecki [Tue, 11 Jul 2023 08:30:08 +0000 (10:30 +0200)]
bcm53xx: backport DT changes from v6.5
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
8674b41c0d84f09e14bf8ebe08e1d6dc6ac5fa64)
Rafał Miłecki [Mon, 10 Jul 2023 09:38:23 +0000 (11:38 +0200)]
kernel: bgmac: fix regressed support for BCM53573 SoCs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
d54f3b2cfdbd34aa61ca67fd590eebfdf3db51cf)
Rafał Miłecki [Mon, 10 Jul 2023 09:38:01 +0000 (11:38 +0200)]
bcm47xx: fix bgmac MTU patch filename
Fixes: 4970dd027bce ("bcm47xx: revert bgmac back to the old limited max frame size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
83aeb0bbd47638b42ee6cdda351d0c51e014d790)
Rafał Miłecki [Fri, 16 Jun 2023 07:16:39 +0000 (09:16 +0200)]
kernel: backport NVMEM patches queued for the v6.5
This includes some driver changes and support for fixed cells layout.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit
07bdc5551558287f7a99f6ae8e6d82d7d09d5781)
Martin Schiller [Tue, 27 Jun 2023 07:57:53 +0000 (09:57 +0200)]
kernel: net: phy: realtek: fix rtl822x_probe on unsupported devices
Calling rtl822x_probe() on phy devices which uses the rtl822x_read_mmd()
and rtl822x_write_mmd() functions makes no sense and the probe ends with
an EOPNOTSUPP error.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(cherry picked from commit
5af7d47cd7fb936dc7d640e1ba63443152d0416a)
Felix Fietkau [Fri, 30 Jun 2023 12:46:19 +0000 (14:46 +0200)]
ramips/mt7621: disable the cpufreq driver
It causes a noticeable performance decrease
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
dc38199b96ee3ef0ac52873893c42e28fa0564fa)
Aleksander Jan Bajkowski [Mon, 22 May 2023 21:27:52 +0000 (23:27 +0200)]
kernel: sort generic configuration
This was done by executing these commands:
$ ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new
$ mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15
$ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new
$ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
(cherry picked from commit
4f197f91342bc5e1f202c091c2c2f90e949d0749)
John Audia [Wed, 5 Jul 2023 20:54:48 +0000 (16:54 -0400)]
kernel: bump 5.15 to 5.15.120
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit
0dc0504fc8e5f0c3cafe6c1da7192f51a09c5bc3)
Nick Hainke [Sun, 2 Apr 2023 21:32:11 +0000 (23:32 +0200)]
wolfssl: update to 5.6.3
Release Notes:
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.0-stable
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.2-stable
- https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.3-stable
Refresh patch:
- 100-disable-hardening-check.patch
Backport patch:
- 001-fix-detection-of-cut-tool-in-configure.ac.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit
0e83b5e6cc8e2970905a2b32c990fa7491ff733c)
John Thomson [Sat, 1 Jul 2023 00:23:35 +0000 (10:23 +1000)]
kernel: fix KernelPackage when all KCONFIG are versioned
If a kernel package was defined where all KCONFIG symbols were dynamic,
and versioned, no FILES would be installed, as the foreach evaluation was
providing the value of the variable defined by the KCONFIG symbol name
including the version test
Fix this by calling the version_filter function on the list of KCONFIG
variable names run through by foreach
Example, kernel 6.1:
KCONFIG:=CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1
filter-out any KCONFIG settings forced by package:
CONFIG_OLD@lt6.1 CONFIG_NEW@ge6.1
there are dynamic settings, so for each of them,
get the value of the make variable defined by symbol name:
CONFIG_OLD@lt6.1 is not set
CONFIG_NEW@ge6.1 is not set
versus
CONFIG_OLD is not set
CONFIG_NEW=m
test if any of these are m, or y
if yes, install files, otherwise, nothing to install
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
(cherry picked from commit
b3448b3fdb59d25dce05991dc8f322c1020b090b)
John Audia [Mon, 3 Jul 2023 09:25:56 +0000 (05:25 -0400)]
x86: set CONFIG_X86_AMD_PLATFORM_DEVICE
Needed by AMD processors using Carrizo and later chipsets
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit
946100ba4128dbee8faf3c03afb692bca74d75fa)
Zoltan HERPAI [Sun, 29 Jan 2023 17:26:10 +0000 (18:26 +0100)]
mxs: rework image generation
Migrate to "new" image generation method. Device profiles will be generated
based on image/Makefile instead of profiles/ , which will also allow to
automatically build images for all supported devices via buildbot.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Christian Lamparter [Tue, 4 Jul 2023 18:42:22 +0000 (20:42 +0200)]
ipq-wifi: fix upstream board-2.bin ZTE M289F snafu
The upstream board-2.bin file in the linux-firmware.git
repository for the QCA4019 contains a packed board-2.bin
for this device for both 2.4G and 5G wifis. This isn't
something that the ath10k driver supports.
Until this feature either gets implemented - which is
very unlikely -, or the upstream boardfile is mended
(both, the original submitter and ath10k-firmware
custodian have been notified). OpenWrt will go back
and use its own bespoke boardfile. This unfortunately
means that 2.4G and on some revisions the 5G WiFi is
not available in the initramfs image for this device.
Fixes: #12886
Reported-by: Christian Heuff <christian@heuff.at>
Debugged-by: Georgios Kourachanis <geo.kourachanis@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit
75505c5ec724b9b961dcb411bac1d4b9aede3e1d)
Felix Fietkau [Tue, 4 Jul 2023 04:16:44 +0000 (06:16 +0200)]
mt76: update to the latest version
f704e4f83c6f mt76: mt7915: fix copy&paste issue on capability check rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
816933bee6e6b68156f6aeea083117208bf859f8)
Sander Vanheule [Sat, 24 Jun 2023 20:18:35 +0000 (22:18 +0200)]
ramips: mt7621: add TP-Link EAP613 v1
The TP-Link EAP613 v1 is a ceiling-mount 802.11ax access point. It can
be powered via PoE or a DC barrel connector (12V). Connecting to the
UART requires fine soldering and careful manipulation of any soldered
wires.
Device details:
* SoC: MT7621AT
* Flash: 16 MiB SPI NOR
* RAM: 256 MiB DDR3L
* Wi-Fi:
* MT7905DA + MT7975D: 2.4 GHz + 5 GHz (DBDC), 2x2:2
* Two stamped metal antennas (ANT1, ANT2)
* One PCB antenna (ANT3)
* One unpopulated antenna (ANT4)
* Ethernet:
* 1× 10/100/1000 Mbps port with PoE
* LEDs:
* Array of four blue LEDs with one control line
* Buttons:
* Reset
* Board test points:
* UART: next to CPU RF-shield and power circuits
* JTAG: under CPU RF-shield (untested)
* Watchdog: 3PEAK TPV706 (not implemented)
Althought three antennas are populated, the MT7905DA does not support
the additional Rx chain for background DFS detection (or Bluetooth)
according to commit
6cbcc34f50a3 ("ramips: disable unsupported
background radar detection").
MAC addresses:
* LAN: 48:22:54:xx:xx:a2 (device label)
* WLAN 2.4 GHz: 48:22:54:xx:xx:a2
* WLAN 5 GHz: 48:22:54:xx:xx:a3
The radio calibration blob stored in flash also contains valid MAC
addresses for both radio bands (OUI 00:0c:43).
Factory install:
1. Enable SSH on the device via web interface
2. Log in with SSH, and run `cliclientd stopcs`
3. Upload -factory.bin image via web interface. It may be necessary to
shorten the filename of the image to e.g. 'factory.bin'.
Recovery:
1. Open the device by unscrewing four screws from the backside
2. Carefully remove board from the housing
3. Connect to UART (3.3V):
* Find test points labelled "VCC", "GND", "UART_TX", "UART_RX"
* Solder wires to test points or connect otherwise. Be careful not
to damage the PCB e.g. by pulling on soldered wires.
* Open console with 115200n8 settings
4. Interrupt bootloader and use tftpboot to start an initramfs:
setenv ipaddr $DEVICE_IP
setenv serverip $SERVER_IP
tftpboot
84000000 openwrt-initramfs-kernel.bin
bootm
DO NOT use saveenv to store modified u-boot environment variables. The
environment is saved at flash offset 0x30000, which erases part of the
(secondary) bootloader.
The device uses two bootloader stages. The first stage will load the
second stage from a uImage stored at flash offset 0x10000. In case of
a damaged second stage, the first stage should allow uploading a new
image via y-modem (untested).
Signed-off-by: Sander Vanheule <sander@svanheule.net>
(cherry picked from commit
11588c52b47c2c3b2cdc7849ce9e4804bfdb8bb5)
Sander Vanheule [Thu, 29 Jun 2023 14:13:33 +0000 (16:13 +0200)]
firmware-utils: bump to git HEAD
Add support for a number of new TP-Link devices.
9e2de8515be1 tplink-safeloader: add EAP610 v3 and EAP613 v1
bb12cf5c3fa9 tplink-safeloader: Add support for TP-Link Deco M5
a2d49fb1e188 tplink-safeloader: add RU support-list entry for Archer C6U v1
Signed-off-by: Sander Vanheule <sander@svanheule.net>
(cherry picked from commit
0cdcf0338290a83d7679005e80cf7f547860bfc5)
David Bauer [Fri, 30 Jun 2023 17:30:09 +0000 (19:30 +0200)]
mediatek: define NMBM management region for WAX220
The NETGEAR WAX220 employs NMBM on SPI-NAND. In order to avoid dealing
with invalid factory data, enable NMBM in the area preceding the UBI
volume.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit
92eec257dd562547bc08ee76c1901eb22b66937c)
Hauke Mehrtens [Sat, 1 Jul 2023 10:06:34 +0000 (12:06 +0200)]
libnl-tiny: update to latest git HEAD
d433990 Make struct nla_policy and struct nlattr const
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
513bcfdf78d7ffbcf244da2e6910a3d04b17ae01)
Mathew McBride [Tue, 27 Jun 2023 01:23:40 +0000 (01:23 +0000)]
linux-firmware: ibt-firmware: install sfi/ddc files for AX210 card
When using an Intel AX210 card, the Bluetooth hci interface failed
to start due to a missing "ibt-0041-0041.sfi" file.
Bluetooth: hci0: Failed to load Intel firmware file intel/ibt-0041-0041.sfi (-2)
A device specific configuration file (DDC) is also required:
Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi
Bluetooth: hci0: Waiting for firmware download to complete
...
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0041-0041.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
Bluetooth: hci0: Firmware timestamp 2023.13 buildtype 1 build 62562
Fixes: #8558
Signed-off-by: Mathew McBride <matt@traverse.com.au>
(cherry picked from commit
fff6833d4c01205156f9431a111a51f96642b476)
Robert Marko [Tue, 27 Jun 2023 08:11:44 +0000 (10:11 +0200)]
generic: filter out CONFIG_FRAME_WARN
CONFIG_FRAME_WARN value is set by config/Config-kernel.in based on the
target type dynamically since commit:
16a2051 ("kernel: Set CONFIG_FRAME_WARN depending on target").
However, CONFIG_FRAME_WARN was not set to get filtered out so it ended up
in multiple target configs during refreshes.
So, lets filter out CONFIG_FRAME_WARN as its set dynamically to prevent it
ending up in more target configs.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
(cherry picked from commit
7a9a4168bb7f4b77c300afb99c163c793305e84f)
Joshua O'Leary [Wed, 7 Jun 2023 10:32:22 +0000 (11:32 +0100)]
zbt-wd323: add GPIO WDT support
Watchdog has not been properly configured for this router - the PCB has a
hardware watchdog connected to one of the GPIO pin 21 [1]
This commit provides this fix [2]
Without this fix, the ZBT-WD323 is unusable in OpenWRT because it power
cycles every 30 seconds due to the watchdog tripping
[1] https://forum.openwrt.org/t/zbt-wd323-router-power-cycles-every-30-seconds/77535/7
[2] https://forum.openwrt.org/t/zbt-wd323-images-unusable-proposed-workaround/162145/5
Signed-off-by: Joshua O'Leary <josh.oleary@mobile-power.co.uk>
(cherry picked from commit
008cc836fe42577af2843730dfefd31b750c7de6)
Mikhail Zhilkin [Sun, 11 Jun 2023 20:50:23 +0000 (20:50 +0000)]
ramips: add support for Sercomm S1500 devices
This commit adds support for following wireless routers:
- Beeline SmartBox PRO (Serсomm S1500 AWI)
- WiFire S1500.NBN (Serсomm S1500 BUC)
This commit is based on this PR:
Link: https://github.com/openwrt/openwrt/pull/4770
- Author: Maximilian Weinmann <x1@disroot.org>
The opening of this PR was agreed with author.
My changes:
- Sorting, minor changes and some movings between dts and dtsi
- Move leds to dts when possible
- Recipes for the factory image
- Update of the installation/recovery/return to stock guides
- Add reset GPIO for the pcie1
Common specification
--------------------
SoC: MediaTek MT7621AT (880 MHz, 2 cores)
Switch: MediaTek MT7530 (via SoC MT7621AT)
Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2
Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2
Ethernet: 5 ports - 5×GbE (WAN, LAN1-4)
Mini PCIe: via J2 on PCB, not soldered on the board
UART: J4 -> GND[], TX, VCC(3.3V), RX
BootLoader: U-Boot SerComm/Mediatek
Beeline SmartBox PRO specification
----------------------------------
RAM (Nanya NT5CB128M16FP): 256 MiB
NAND-Flash (ESMT F59L2G81A): 256 MiB
USB ports: 2xUSB2.0
LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet
Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP)
Power: 12 VDC, 1.5 A
PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0
CSN: SG15********
MAC LAN: 94:4A:0C:**:**:**
Manufacturer's code: 0AWI0500QW1
WiFire S1500.NBN specification
------------------------------
RAM (Nanya NT5CC64M16GP): 128 MiB
NAND-Flash (ESMT F59L1G81MA): 128 MiB
USB ports: 1xUSB2.0
LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet
Buttons: 2 button (RESET, WPS)
Power: 12 VDC, 1.0 A
PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0
CSN: MH16********
MAC WAN: E0:60:66:**:**:**
Manufacturer's code: 0BUC0500RW1
MAC address table (PRO)
-----------------------
use address source
LAN *:23 factory 0x1000 (label)
WAN *:24 factory $label +1
2g *:23 factory $label
5g *:25 factory $label +2
MAC addresses (NBN)
-------------------
use address source
LAN *:0e factory 0x1000
WAN *:0f LAN +1 (label)
2g *:0f LAN +1
5g *:10 LAN +2
OEM easy installation
---------------------
1. Remove all dots from the factory image filename (except the dot
before file extension)
2. Upload and update the firmware via the original web interface
3. Two options are possible after the reboot:
a. OpenWrt - that's OK, the mission accomplished
b. Stock firmware - install Stock firmware (to switch booflag from
Sercomm0 to Sercomm1) and then OpenWrt factory image.
Return to Stock
---------------
1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot:
printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2
reboot
2. Install stock firmware via the web OEM firmware interface
Recovery
--------
Use sercomm-recovery tool.
Link: https://github.com/danitool/sercomm-recovery
Tested-by: Pavel Ivanov <pi635v@gmail.com>
Tested-by: Denis Myshaev <denis.myshaev@gmail.com>
Tested-by: Oleg Galeev <olegingaleev@gmail.com>
Tested-By: Ivan Pavlov <AuthorReflex@gmail.com>
Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit
2d6784a033a994043759fa3b94c48afd5df81f88)
Mikhail Zhilkin [Sun, 11 Jun 2023 20:48:49 +0000 (20:48 +0000)]
ramips: sercomm.mk: preparation for Sercomm s1500 devices support
This commit moves a part of the code from the "sercomm-factory-cqr" recipe
to the separate "sercomm-mkhash" recipe. This simplifies recipes and
allows insert additional recipes between these code blocks (required for
the future support for Beeline SmartBox PRO router).
dd automatically fills the file by 0x00 if the filesize is less than
offset where we start writing. We drop such dd command so we need to add
--extra-padding-size 0x190 to the sercomm-pid.py call.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit
f560be583a858bc3099f2b1f0aa0ddec62cfd91c)
John Audia [Wed, 28 Jun 2023 10:53:45 +0000 (06:53 -0400)]
kernel: bump 5.15 to 5.15.119
Build system: x86_64
Build-tested: x86_64/ACEMAGICIAN T8PLUS, ramips/tplink_archer-a6-v3
Run-tested: x86_64/ACEMAGICIAN T8PLUS, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit
42cb0f0f260484ac07e3d698ebc5c546e1800051)
Felix Fietkau [Sat, 1 Jul 2023 20:09:07 +0000 (22:09 +0200)]
mt76: fix download hash
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
a3e173e00e7a7f647528ec04be432bccfb5995ad)
Felix Fietkau [Thu, 22 Jun 2023 17:37:13 +0000 (19:37 +0200)]
mt76: update to the latest version
2c9c8ffe9d8c wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
3365c80f4202 wifi: mt76: connac: fix stats->tx_bytes calculation
b69d82130b47 wifi: mt76: connac: do not check WED status for non-mmio devices
1f9cd65b55d7 wifi: mt76: mt7921e: fix probe timeout after reboot
42dace9ce247 wifi: mt76: mt7921: Fix use-after-free in fw features query.
540adbb38205 wifi: mt76: mt7921: add Netgear AXE3000 (A8000) support
150e2d0ffc0c wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi()
5b7519be2bf6 wifi: mt76: mt7996: fix endianness of MT_TXD6_TX_RATE
40f6e433f747 wifi: mt76: mt76x02: remove WEP support
84ea1a24f5b5 mt76: mt7921: don't assume adequate headroom for SDIO headers
5c28e17f8c78 wifi: mt76: mt7996: fix header translation logic
2386cec860fa wifi: mt76: mt7996: enable BSS_CHANGED_MU_GROUPS support
748d4a2bfebd wifi: mt76: mt7615: enable BSS_CHANGED_MU_GROUPS support
458ad0af21be wifi: mt76: enable UNII-4 channel 177 support
7fb046011293 wifi: mt76: mt7915: fix background radar event being blocked
d2a77a9954bb wifi: mt76: mt7915: report tx retries/failed counts for non-WED path
f76b102b09ca wifi: mt76: mt7915: rework tx packets counting when WED is active
5637d9e37d9e wifi: mt76: mt7915: rework tx bytes counting when WED is active
34bdc7fcb4c0 wifi: mt76: report non-binding skb tx rate when WED is active
d71aa7b992a3 wifi: mt76: mt7915: drop return in mt7915_sta_statistics
251c363c3087 wifi: mt76: mt7996: drop return in mt7996_sta_statistics
150bb95cb153 wifi: mt76: mt7921: do not support one stream on secondary antenna only
d480c3281f21 wifi: mt76: mt7921: remove macro duplication in regs.h
18b1027e5b6e wifi: mt76: mt7915: move mib_stats structure in mt76.h
25ec4b91020e wifi: mt76: mt7996: rely on mib_stats shared definition
6541afa88b3b wifi: mt76: mt7921: rely on mib_stats shared definition
eeb60eb9a5a0 wifi: mt76: mt7915: add support for MT7981 [sync with upstream]
d5b7e6a3d735 wifi: mt76: mt7921e: report tx retries/failed counts in tx free event
f0f19cea6646 wifi: mt76: mt7921: fix skb leak by txs missing in AMSDU
edd8a830f6e3 wifi: mt76: add tx_nss histogram to ethtool stats
e48235308b3e wifi: mt76: mt7915: accumulate mu-mimo ofdma muru stats
a729242363d9 wifi: mt76: mt7921: fix non-PSC channel scan fail
8d52436ee0cd wifi: mt76: mt7921: Support temp sensor
d152c8688c14 wifi: mt76: mt7915: disable WFDMA Tx/Rx during SER recovery
d07785c344ac wifi: mt76: mt7996: disable WFDMA Tx/Rx during SER recovery
2a19784137f9 wifi: mt76: mt7921: make mt7921_mac_sta_poll static
da8e33a15e71 wifi: mt76: mt7915: fix command timeout in AP stop period
cc58d5c4a9c9 mt76: mt7996: rely on mt76_sta_stats in mt76_wcid
98a37c82a373 wifi: mt76: mt7921: get rid of MT7921_RESET_TIMEOUT marco
ece724cf562b wifi: mt76: mt7996: move radio ctrl commands to proper functions
527cbbc5ede7 wifi: mt76: connac: add support for dsp firmware download
44e323340637 wifi: mt76: mt7996: fix bss wlan_idx when sending bss_info command
63f0053df07a wifi: mt76: mt7996: enable VHT extended NSS BW feature
e1bb4ef7b2bb wifi: mt76: connac: add support to set ifs time by mcu command
080ca19cc686 wifi: mt76: mt7996: use correct phy for background radar event
2c163f1812a3 wifi: mt76: mt7996: fix WA event ring size
b511a437ace4 wifi: mt76: mt7996: add muru support
ece67c98dc1c wifi: mt76: mt7996: increase tx token size
7c2515d85117 wifi: mt76: mt7921e: fix init command fail with enabled device
30706095c566 wifi: mt76: mt7915: move sta_poll_list and sta_poll_lock in mt76_dev
b06ed10ee271 wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock
b59bdae339de wifi: mt76: mt7615: rely on shared sta_poll_list and sta_poll_lock
6da2e0e4ef54 wifi: mt76: mt7996: rely on shared sta_poll_list and sta_poll_lock
b19d3ad88e8b wifi: mt76: mt7921: rely on shared sta_poll_list and sta_poll_lock
595b033275a3 wifi: mt76: mt7915: move poll_list in mt76_wcid
16fcad171849 wifi: mt76: mt7603: rely on shared poll_list field
e19f84091d2e wifi: mt76: mt7615: rely on shared poll_list field
b87e4dad1e84 wifi: mt76: mt7996: rely on shared poll_list field
6d7950e258d0 wifi: mt76: mt7921: rely on shared poll_list field
f5c5eece5038 wifi: mt76: move ampdu_state in mt76_wcid
7e44467469fe mt76: connac: move more mt7921/mt7915 mac shared code in connac lib
39a70710ddcd wifi: mt76: move rate info in mt76_vif
0dc4326991df wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h
29cfabbb4b90 wifi: mt76: connac: add connac3 mac library
d60b401867f4 linux-firmware: update firmware for MT7922 WiFi device
9404601a6c97 linux-firmware: update firmware for MT7922 WiFi device
2f851902d6b1 linux-firmware: update firmware for MT7921 WiFi device
f36b921692b9 Revert "wifi: mt76: mt76x02: remove WEP support
c50be0b54cdd wifi: mt76: mt7915: fix capabilities in non-AP mode
d7d7479b00e9 wifi: mt7915: fix beaconing in mesh mode
1377f586c6f5 wifi: mt7915: move capability check to start_ap
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit
01885bc6a33dbfa6f3c9e97778fd8f4f60e2514f)
(cherry picked from commit
86ebaef5d427c5732847168f6ceeda12bf528414)
Mikhail Zhilkin [Sat, 13 May 2023 13:51:45 +0000 (13:51 +0000)]
mediatek: add support for Mercusys MR90X v1
This commit adds support for Mercusys MR90X(EU) v1 router.
Device specification
--------------------
SoC Type: MediaTek MT7986BLA, Cortex-A53, 64-bit
RAM: MediaTek MT7986BLA (512MB)
Flash: SPI NAND GigaDevice GD5F1GQ5UEYIGY (128 MB)
Ethernet: MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8)
Ethernet: 1x2.5Gbe (WAN/LAN 2.5Gbps), 3xGbE (WAN/LAN 1Gbps, LAN1, LAN2)
WLAN 2g: MediaTek MT7975N, b/g/n/ax, MIMO 4x4
WLAN 5g: MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4
LEDs: 1 orange and 1 green status LEDs, 4 green gpio-controlled
LEDs on ethernet ports
Button: 1 (Reset)
USB ports: No
Power: 12 VDC, 2 A
Connector: Barrel
Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, both UBI
slots contain "seconduboot" (also U-Boot 2022.01-rc4)
Serial console (UART)
---------------------
V
+-------+-------+-------+-------+
| +3.3V | GND | TX | RX |
+---+---+-------+-------+-------+
|
+--- Don't connect
The R3 (TX line) and R6 (RX line) are absent on the PCB. You should
solder them or solder the jumpers.
Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
tftpboot initramfs-kernel.bin
bootm
4. Once inside OpenWrt, set / update env variables:
fw_setenv baudrate 115200
fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit"
fw_setenv fdtcontroladdr
5ffc0e70
fw_setenv ipaddr 192.168.1.1
fw_setenv loadaddr 0x46000000
fw_setenv mtdids "spi-nand0=spi-nand0"
fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)"
fw_setenv netmask 255.255.255.0
fw_setenv serverip 192.168.1.2
fw_setenv stderr serial@
11002000
fw_setenv stdin serial@
11002000
fw_setenv stdout serial@
11002000
fw_setenv tp_boot_idx 0
5. Run 'sysupgrade -n' with the sysupgrade OpenWrt image
Installation (without UART)
---------------------------
1. Login as root via SSH (router IP, port 20001, password - your web
interface password)
2. Open for editing /etc/hotplug.d/iface/65-iptv (e.g., using WinSCP and
SSH settings from the p.1)
3. Add a newline after "#!/bin/sh":
telnetd -l /bin/login.sh
4. Save "65-iptv" file
5. Toggle "IPTV/VLAN Enable" checkbox in the router web interface and
save
6. Make sure that telnetd is running:
netstat -ltunp | grep 23
7. Login via telnet to router IP, port 23 (no username and password are
required)
8 Upload OpenWrt "initramfs-kernel.bin" to the "/tmp" folder of the
router (e.g., using WinSCP and SSH settings from the p.1)
9. Stock busybox doesn't contain ubiupdatevol command. Hence, we need to
download and upload the full version of busybox to the router. For
example, from here:
https://github.com/xerta555/Busybox-Binaries/raw/master/busybox-arm64
Upload busybox-arm64 to the /tmp dir of the router and run:
in the telnet shell:
cd /tmp
chmod a+x busybox-arm64
10. Check "initramfs-kernel.bin" size:
du -h initramfs-kernel.bin
11. Delete old and create new "kernel" volume with appropriate size
(greater than "initramfs-kernel.bin" size):
ubirmvol /dev/ubi0 -N kernel
ubimkvol /dev/ubi0 -n 1 -N kernel -s 9MiB
12. Write OpenWrt "initramfs-kernel.bin" to the flash:
./busybox-arm64 ubiupdatevol /dev/ubi0_1 /tmp/initramfs-kernel.bin
13. u-boot-env can be empty so lets create it (or overwrite it if it
already exists) with the necessary values:
fw_setenv baudrate 115200
fw_setenv bootargs "ubi.mtd=ubi0 console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000 init=/etc/preinit"
fw_setenv fdtcontroladdr
5ffc0e70
fw_setenv ipaddr 192.168.1.1
fw_setenv loadaddr 0x46000000
fw_setenv mtdids "spi-nand0=spi-nand0"
fw_setenv mtdparts "spi-nand0:2M(boot),1M(u-boot-env),50M(ubi0),50M(ubi1),8M(userconfig),4M(tp_data)"
fw_setenv netmask 255.255.255.0
fw_setenv serverip 192.168.1.2
fw_setenv stderr serial@
11002000
fw_setenv stdin serial@
11002000
fw_setenv stdout serial@
11002000
fw_setenv tp_boot_idx 0
14. Reboot to OpenWrt initramfs:
reboot
15. Login as root via SSH (IP 192.168.1.1, port 22)
16. Upload OpenWrt sysupgrade.bin image to the /tmp dir of the router
17. Run sysupgrade:
sysupgrade -n /tmp/sysupgrade.bin
Recovery
--------
1. Press Reset button and power on the router
2. Navigate to U-Boot recovery web server (http://192.168.1.1/) and
upload the OEM firmware
Recovery (UART)
---------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
tftpboot initramfs-kernel.bin
bootm
4. Do what you need (restore partitions from a backup, install OpenWrt
etc.)
Stock layout
------------
0x000000000000-0x000000200000 : "boot"
0x000000200000-0x000000300000 : "u-boot-env"
0x000000300000-0x000003500000 : "ubi0"
0x000003500000-0x000006700000 : "ubi1"
0x000006700000-0x000006f00000 : "userconfig"
0x000006f00000-0x000007300000 : "tp_data"
ubi0/ubi1 format
----------------
U-Boot at boot checks that all volumes are in place:
+-------------------------------+
| Volume Name: uboot Vol ID: 0|
| Volume Name: kernel Vol ID: 1|
| Volume Name: rootfs Vol ID: 2|
+-------------------------------+
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| label | 00:eb:xx:xx:xx:be | label |
| LAN | 00:eb:xx:xx:xx:be | label |
| WAN | 00:eb:xx:xx:xx:bf | label+1 |
| WLAN 2g | 00:eb:xx:xx:xx:be | label |
| WLAN 5g | 00:eb:xx:xx:xx:bd | label-1 |
+---------+-------------------+-----------+
label MAC address was found in UBI partition "tp_data", file
"default-mac". OEM wireless eeprom is also there (file
"MT7986_EEPROM.bin").
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
(cherry picked from commit
e4fe3097ef6a961874b66932a0ac4be18070630a)
[Fix merging conflict]
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Andreas Böhler [Wed, 7 Jun 2023 19:24:18 +0000 (21:24 +0200)]
ipq4019: add support for ZTE MF287+ aka DreiNeo
The ZTE MF287+ is a LTE router used (exclusively?) by the network operator
"3". The MF287 (i.e. non-plus aka 3Neo) is also supported (the only
difference is the LTE modem)
Specifications
==============
SoC: IPQ4018
RAM: 256MiB
Flash: 8MiB SPI-NOR + 128MiB SPI-NAND
LAN: 4x GBit LAN
LTE: ZTE Cat12 (MF287+) / ZTE Cat6 (MF287)
WiFi: 802.11a/b/g/n/ac SoC-integrated
MAC addresses
=============
LAN: from config + 2
WiFi 1: from config
WiFi 2: from config + 1
Installation
============
Option 1 - TFTP
---------------
TFTP installation using UART is preferred. Disassemble the device and
connect serial. Put the initramfs image as openwrt.bin to your TFTP server
and configure a static IP of 192.168.1.100. Load the initramfs image by
typing:
setenv serverip 192.168.1.100
setenv ipaddr 192.168.1.1
tftpboot 0x82000000 openwrt.bin
bootm 0x82000000
From this intiramfs boot you can take a backup of the currently installed
partitions as no vendor firmware is available for download:
ubiattach -m14
cat /dev/ubi0_0 > /tmp/ubi0_0
cat /dev/ubi0_1 > /tmp/ubi0_1
Copy the files /tmp/ubi0_0 and /tmp/ubi0_1 somewhere save.
Once booted, transfer the sysupgrade image and run sysupgrade. You might
have to delete the stock volumes first:
ubirmvol /dev/ubi0 -N ubi_rootfs
ubirmvol /dev/ubi0 -N kernel
Option 2 - From stock firmware
------------------------------
The installation from stock requires an exploit first. The exploit consists
of a backup file that forces the firmware to download telnetd via TFTP from
192.168.0.22 and run it. Once exploited, you can connect via telnet and
login as admin:admin.
The exploit will be available at the device wiki page.
Once inside the stock firmware, you can transfer the -factory.bin file to
/tmp by using "scp" from the stock frmware or "tftp".
ZTE has blocked writing to the NAND. Fortunately, it's easy to allow write
access - you need to read from one file in /proc. Once done, you need to
erase the UBI partition and flash OpenWrt. Before performing the operation,
make sure that mtd13 is the partition labelled "rootfs" by calling
"cat /proc/mtd".
Complete commands:
cd /tmp
tftp -g -r factory.bin 192.168.0.22
cat /proc/driver/sensor_id
flash_erase /dev/mtd13 0 0
dd if=/tmp/factory.bin of=/dev/mtdblock13 bs=131072
Afterwards, reboot your device and you should have a working OpenWrt
installation.
Restore Stock
=============
Option 1 - via UART
-------------------
Boot an OpenWrt initramfs image via TFTP as for the initial installation.
Transfer the two backed-up files to your box to /tmp.
Then, run the following commands - replace $kernel_length and $rootfs_size
by the size of ubi0_0 and ubi0_1 in bytes.
ubiattach -m 14
ubirmvol /dev/ubi0 -N kernel
ubirmvol /dev/ubi0 -N rootfs
ubirmvol /dev/ubi0 -N rootfs_data
ubimkvol /dev/ubi0 -N kernel -s $kernel_length
ubimkvol /dev/ubi0 -N ubi_rootfs -s $rootfs_size
ubiupdatevol /dev/ubi0_0 /tmp/ubi0_0
ubiupdatevol /dev/ubi0_1 /tmp/ubi0_1
Option 2 - from within OpenWrt
------------------------------
This option requires to flash an initramfs version first so that access
to the flash is possible. This can be achieved by sysupgrading to the
recovery.bin version and rebooting. Once rebooted, you are again in a
default OpenWrt installation, but no partition is mounted.
Follow the commands from Option 1 to flash back to stock.
LTE Modem
=========
The LTE modem is similar to other ZTE devices and controls some more LEDs
and battery management.
Configuring the connection using uqmi works properly, the modem
provides three serial ports and a QMI CDC ethernet interface.
Signed-off-by: Andreas Böhler <dev@aboehler.at>
(cherry picked from commit
f70ee53b08466f612546f699c556cbdaa39e1466)
Andreas Böhler [Sun, 14 May 2023 14:39:15 +0000 (16:39 +0200)]
ipq40xx: Enable gpio-restart in kernel configuration
Some ZTE devices require the gpio-restart driver to support restarting the
LTE modem along with OpenWrt
Signed-off-by: Andreas Böhler <dev@aboehler.at>
(cherry picked from commit
9ffdaa7fa1478146b5d8c77d4b3a5d4d4007a487)
Jianhui Zhao [Mon, 5 Jun 2023 03:02:07 +0000 (03:02 +0000)]
uboot-envtools: Add u-boot env config for GL-MT3000
This commit add u-boot env config for GL-MT3000, so
that we can use fw_printenv to print u-boot env and
use fw_setenv to set u-boot env in GL-MT3000.
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
(cherry picked from commit
6892603efa11603c6f365bee1cf94e98336d72aa)
Hauke Mehrtens [Tue, 27 Jun 2023 22:08:33 +0000 (00:08 +0200)]
OpenWrt v23.05.0-rc2: revert to branch defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Tue, 27 Jun 2023 22:08:24 +0000 (00:08 +0200)]
OpenWrt v23.05.0-rc2: adjust config defaults
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Flole Systems [Mon, 10 Apr 2023 21:36:59 +0000 (23:36 +0200)]
filogic: add support for Netgear WAX220
Hardware
--------
SOC: MediaTek MT7986
RAM: 1024MB DDR3
FLASH: 128MB SPI-NAND (Winbond)
WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
Installation
------------
1. Download the OpenWrt initramfs image. Copy the image to a TFTP server
2. Connect the TFTP server to the WAX220. Conect to the serial console,
interrupt the autoboot process by pressing '0' when prompted.
3. Download & Boot the OpenWrt initramfs image.
$ setenv ipaddr 192.168.2.1
$ setenv serverip 192.168.2.2
$ tftpboot openwrt.bin
$ bootm
4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device
using scp and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Signed-off-by: Flole Systems <flole@flole.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
(cherry picked from commit
984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b)
Hauke Mehrtens [Sun, 25 Jun 2023 18:03:42 +0000 (20:03 +0200)]
uhttpd: update to latest git HEAD
34a8a74 uhttpd/file: fix string out of buffer range on uh_defer_script
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit
7a6f6b812632a5983cd34ab5c41271d5d4de5fbf)
John Audia [Wed, 21 Jun 2023 16:17:06 +0000 (12:17 -0400)]
kernel: bump 5.15 to 5.15.118
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit
1f5fce27c195373fedcf233a48470de97752058f)
projects / openwrt / openwrt.git / log